path: root/drivers/net/wireless/ath/ath10k/sdio.h

/* SPDX-License-Identifier: ISC */
/*
 * Copyright (c) 2004-2011 Atheros Communications Inc.
 * Copyright (c) 2011-2012 Qualcomm Atheros, Inc.
 * Copyright (c) 2016-2017 Erik Stromdahl <erik.stromdahl@gmail.com>
 */

#ifndef _SDIO_H_
#define _SDIO_H_

#define ATH10K_HIF_MBOX_BLOCK_SIZE              256

#define QCA_MANUFACTURER_ID_BASE                GENMASK(11, 8)
#define QCA_MANUFACTURER_ID_AR6005_BASE         0x5
#define QCA_MANUFACTURER_ID_QCA9377_BASE        0x7
#define QCA_SDIO_ID_AR6005_BASE                 0x500
#define QCA_SDIO_ID_QCA9377_BASE                0x700
#define QCA_MANUFACTURER_ID_REV_MASK            0x00FF
#define QCA_MANUFACTURER_CODE                   0x271 /* Qualcomm/Atheros */

#define ATH10K_SDIO_MAX_BUFFER_SIZE             4096 /*Unsure of this constant*/

/* Mailbox address in SDIO address space */
#define ATH10K_HIF_MBOX_BASE_ADDR               0x1000
#define ATH10K_HIF_MBOX_WIDTH                   0x800

#define ATH10K_HIF_MBOX_TOT_WIDTH \
	(ATH10K_HIF_MBOX_NUM_MAX * ATH10K_HIF_MBOX_WIDTH)

#define ATH10K_HIF_MBOX0_EXT_BASE_ADDR          0x5000
#define ATH10K_HIF_MBOX0_EXT_WIDTH              (36 * 1024)
#define ATH10K_HIF_MBOX0_EXT_WIDTH_ROME_2_0     (56 * 1024)
#define ATH10K_HIF_MBOX1_EXT_WIDTH              (36 * 1024)
#define ATH10K_HIF_MBOX_DUMMY_SPACE_SIZE        (2 * 1024)

#define ATH10K_HTC_MBOX_MAX_PAYLOAD_LENGTH \
	(ATH10K_SDIO_MAX_BUFFER_SIZE - sizeof(struct ath10k_htc_hdr))

#define ATH10K_HIF_MBOX_NUM_MAX                 4
#define ATH10K_SDIO_BUS_REQUEST_MAX_NUM         64

#define ATH10K_SDIO_HIF_COMMUNICATION_TIMEOUT_HZ (100 * HZ)

/* HTC runs over mailbox 0 */
#define ATH10K_HTC_MAILBOX                      0
#define ATH10K_HTC_MAILBOX_MASK                 BIT(ATH10K_HTC_MAILBOX)

/* GMBOX addresses */
#define ATH10K_HIF_GMBOX_BASE_ADDR              0x7000
#define ATH10K_HIF_GMBOX_WIDTH                  0x4000

/* Modified versions of the sdio.h macros.
 * The macros in sdio.h can't be used easily with the FIELD_{PREP|GET}
 * macros in bitfield.h, so we define our own macros here.
 */
#define ATH10K_SDIO_DRIVE_DTSX_MASK \
	(SDIO_DRIVE_DTSx_MASK << SDIO_DRIVE_DTSx_SHIFT)

#define ATH10K_SDIO_DRIVE_DTSX_TYPE_B           0
#define ATH10K_SDIO_DRIVE_DTSX_TYPE_A           1
#define ATH10K_SDIO_DRIVE_DTSX_TYPE_C           2
#define ATH10K_SDIO_DRIVE_DTSX_TYPE_D           3

/* SDIO CCCR register definitions */
#define CCCR_SDIO_IRQ_MODE_REG                  0xF0
#define CCCR_SDIO_IRQ_MODE_REG_SDIO3            0x16

#define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_ADDR   0xF2

#define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_A      0x02
#define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_C      0x04
#define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_D      0x08

#define CCCR_SDIO_ASYNC_INT_DELAY_ADDRESS       0xF0
#define CCCR_SDIO_ASYNC_INT_DELAY_MASK          0xC0

/* mode to enable special 4-bit interrupt assertion without clock */
#define SDIO_IRQ_MODE_ASYNC_4BIT_IRQ            BIT(0)
#define SDIO_IRQ_MODE_ASYNC_4BIT_IRQ_SDIO3      BIT(1)

#define ATH10K_SDIO_TARGET_DEBUG_INTR_MASK      0x01

/* The theoretical maximum number of RX messages that can be fetched
 * from the mbox interrupt handler in one loop is derived in the following
 * way:
 *
 * Let's assume that each packet in a bundle of the maximum bundle size
 * (HTC_HOST_MAX_MSG_PER_RX_BUNDLE) has the HTC header bundle count set
 * to the maximum value (HTC_HOST_MAX_MSG_PER_RX_BUNDLE).
 *
 * in this case the driver must allocate
 * (HTC_HOST_MAX_MSG_PER_RX_BUNDLE * 2) skb's.
 */
#define ATH10K_SDIO_MAX_RX_MSGS \
	(HTC_HOST_MAX_MSG_PER_RX_BUNDLE * 2)

#define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL   0x00000868u
#define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL_DISABLE_SLEEP_OFF 0xFFFEFFFF
#define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL_DISABLE_SLEEP_ON 0x10000

struct ath10k_sdio_bus_request {
	struct list_head list;

	/* sdio address */
	u32 address;

	struct sk_buff *skb;
	enum ath10k_htc_ep_id eid;
	int status;
	/* Specifies if the current request is an HTC message.
	 * If not, the eid is not applicable an the TX completion handler
	 * associated with the endpoint will not be invoked.
	 */
	bool htc_msg;
	/* Completion that (if set) will be invoked for non HTC requests
	 * (htc_msg == false) when the request has been processed.
	 */
	struct completion *comp;
};

struct ath10k_sdio_rx_data {
	struct sk_buff *skb;
	size_t alloc_len;
	size_t act_len;
	enum ath10k_htc_ep_id eid;
	bool part_of_bundle;
	bool last_in_bundle;
	bool trailer_only;
	int status;
};

struct ath10k_sdio_irq_proc_regs {
	u8 host_int_status;
	u8 cpu_int_status;
	u8 error_int_status;
	u8 counter_int_status;
	u8 mbox_frame;
	u8 rx_lookahead_valid;
	u8 host_int_status2;
	u8 gmbox_rx_avail;
	__le32 rx_lookahead[2 * ATH10K_HIF_MBOX_NUM_MAX];
	__le32 int_status_enable;
};

struct ath10k_sdio_irq_enable_regs {
	u8 int_status_en;
	u8 cpu_int_status_en;
	u8 err_int_status_en;
	u8 cntr_int_status_en;
};

struct ath10k_sdio_irq_data {
	/* protects irq_proc_reg and irq_en_reg below.
	 * We use a mutex here and not a spinlock since we will have the
	 * mutex locked while calling the sdio_memcpy_ functions.
	 * These function require non atomic context, and hence, spinlocks
	 * can be held while calling these functions.
	 */
	struct mutex mtx;
	struct ath10k_sdio_irq_proc_regs *irq_proc_reg;
	struct ath10k_sdio_irq_enable_regs *irq_en_reg;
};

struct ath10k_mbox_ext_info {
	u32 htc_ext_addr;
	u32 htc_ext_sz;
};

struct ath10k_mbox_info {
	u32 htc_addr;
	struct ath10k_mbox_ext_info ext_info[2];
	u32 block_size;
	u32 block_mask;
	u32 gmbox_addr;
	u32 gmbox_sz;
};

struct ath10k_sdio {
	struct sdio_func *func;

	struct ath10k_mbox_info mbox_info;
	bool swap_mbox;
	u32 mbox_addr[ATH10K_HTC_EP_COUNT];
	u32 mbox_size[ATH10K_HTC_EP_COUNT];

	/* available bus requests */
	struct ath10k_sdio_bus_request bus_req[ATH10K_SDIO_BUS_REQUEST_MAX_NUM];
	/* free list of bus requests */
	struct list_head bus_req_freeq;

	struct sk_buff_head rx_head;

	/* protects access to bus_req_freeq */
	spinlock_t lock;

	struct ath10k_sdio_rx_data rx_pkts[ATH10K_SDIO_MAX_RX_MSGS];
	size_t n_rx_pkts;

	struct ath10k *ar;
	struct ath10k_sdio_irq_data irq_data;

	/* temporary buffer for sdio read.
	 * It is allocated when probe, and used for receive bundled packets,
	 * the read for bundled packets is not parallel, so it does not need
	 * protected.
	 */
	u8 *vsg_buffer;

	/* temporary buffer for BMI requests */
	u8 *bmi_buf;

	bool is_disabled;

	struct workqueue_struct *workqueue;
	struct work_struct wr_async_work;
	struct list_head wr_asyncq;
	/* protects access to wr_asyncq */
	spinlock_t wr_async_lock;

	struct work_struct async_work_rx;
};

static inline struct ath10k_sdio *ath10k_sdio_priv(struct ath10k *ar)
{
	return (struct ath10k_sdio *)ar->drv_priv;
}

#endif