1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
|
/* SPDX-License-Identifier: GPL-2.0 */
#include <linux/device.h>
#include <linux/etherdevice.h>
#include <linux/gpio/driver.h>
/* The VSC7395 switch chips have 5+1 ports which means 5 ordinary ports and
* a sixth CPU port facing the processor with an RGMII interface. These ports
* are numbered 0..4 and 6, so they leave a "hole" in the port map for port 5,
* which is invalid.
*
* The VSC7398 has 8 ports, port 7 is again the CPU port.
*
* We allocate 8 ports and avoid access to the nonexistent ports.
*/
#define VSC73XX_MAX_NUM_PORTS 8
/**
* struct vsc73xx_portinfo - port data structure: contains storage data
* @pvid_vlan_filtering: pvid vlan number used in vlan filtering mode
* @pvid_tag_8021q: pvid vlan number used in tag_8021q mode
* @pvid_vlan_filtering_configured: informs if port has configured pvid in vlan
* filtering mode
* @pvid_tag_8021q_configured: imforms if port have configured pvid in tag_8021q
* mode
*/
struct vsc73xx_portinfo {
u16 pvid_vlan_filtering;
u16 pvid_tag_8021q;
bool pvid_vlan_filtering_configured;
bool pvid_tag_8021q_configured;
};
/**
* struct vsc73xx - VSC73xx state container: main data structure
* @dev: The device pointer
* @reset: The descriptor for the GPIO line tied to the reset pin
* @ds: Pointer to the DSA core structure
* @gc: Main structure of the GPIO controller
* @chipid: Storage for the Chip ID value read from the CHIPID register of the
* switch
* @addr: MAC address used in flow control frames
* @ops: Structure with hardware-dependent operations
* @priv: Pointer to the configuration interface structure
* @portinfo: Storage table portinfo structructures
* @vlans: List of configured vlans. Contains port mask and untagged status of
* every vlan configured in port vlan operation. It doesn't cover tag_8021q
* vlans.
*/
struct vsc73xx {
struct device *dev;
struct gpio_desc *reset;
struct dsa_switch *ds;
struct gpio_chip gc;
u16 chipid;
u8 addr[ETH_ALEN];
const struct vsc73xx_ops *ops;
void *priv;
struct vsc73xx_portinfo portinfo[VSC73XX_MAX_NUM_PORTS];
struct list_head vlans;
};
/**
* struct vsc73xx_ops - VSC73xx methods container
* @read: Method for register reading over the hardware-dependent interface
* @write: Method for register writing over the hardware-dependent interface
*/
struct vsc73xx_ops {
int (*read)(struct vsc73xx *vsc, u8 block, u8 subblock, u8 reg,
u32 *val);
int (*write)(struct vsc73xx *vsc, u8 block, u8 subblock, u8 reg,
u32 val);
};
/**
* struct vsc73xx_bridge_vlan - VSC73xx driver structure which keeps vlan
* database copy
* @vid: VLAN number
* @portmask: each bit represents one port
* @untagged: each bit represents one port configured with @vid untagged
* @list: list structure
*/
struct vsc73xx_bridge_vlan {
u16 vid;
u8 portmask;
u8 untagged;
struct list_head list;
};
int vsc73xx_is_addr_valid(u8 block, u8 subblock);
int vsc73xx_probe(struct vsc73xx *vsc);
void vsc73xx_remove(struct vsc73xx *vsc);
void vsc73xx_shutdown(struct vsc73xx *vsc);
|
