summaryrefslogtreecommitdiff
path: root/drivers/misc/gehc-achc.c
blob: b8fca4d393c66e55e9088a9925cb63dcb5adebb8 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
// SPDX-License-Identifier: GPL-2.0-only
/*
 * datasheet: https://www.nxp.com/docs/en/data-sheet/K20P144M120SF3.pdf
 *
 * Copyright (C) 2018-2021 Collabora
 * Copyright (C) 2018-2021 GE Healthcare
 */

#include <linux/delay.h>
#include <linux/firmware.h>
#include <linux/gpio/consumer.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/spi/spi.h>

#define ACHC_MAX_FREQ_HZ 300000
#define ACHC_FAST_READ_FREQ_HZ 1000000

struct achc_data {
	struct spi_device *main;
	struct spi_device *ezport;
	struct gpio_desc *reset;

	struct mutex device_lock; /* avoid concurrent device access */
};

#define EZPORT_RESET_DELAY_MS	100
#define EZPORT_STARTUP_DELAY_MS	200
#define EZPORT_WRITE_WAIT_MS	10
#define EZPORT_TRANSFER_SIZE	2048

#define EZPORT_CMD_SP		0x02 /* flash section program */
#define EZPORT_CMD_RDSR		0x05 /* read status register */
#define EZPORT_CMD_WREN		0x06 /* write enable */
#define EZPORT_CMD_FAST_READ	0x0b /* flash read data at high speed */
#define EZPORT_CMD_RESET	0xb9 /* reset chip */
#define EZPORT_CMD_BE		0xc7 /* bulk erase */
#define EZPORT_CMD_SE		0xd8 /* sector erase */

#define EZPORT_SECTOR_SIZE	4096
#define EZPORT_SECTOR_MASK	(EZPORT_SECTOR_SIZE - 1)

#define EZPORT_STATUS_WIP	BIT(0) /* write in progress */
#define EZPORT_STATUS_WEN	BIT(1) /* write enable */
#define EZPORT_STATUS_BEDIS	BIT(2) /* bulk erase disable */
#define EZPORT_STATUS_FLEXRAM	BIT(3) /* FlexRAM mode */
#define EZPORT_STATUS_WEF	BIT(6) /* write error flag */
#define EZPORT_STATUS_FS	BIT(7) /* flash security */

static void ezport_reset(struct gpio_desc *reset)
{
	gpiod_set_value(reset, 1);
	msleep(EZPORT_RESET_DELAY_MS);
	gpiod_set_value(reset, 0);
	msleep(EZPORT_STARTUP_DELAY_MS);
}

static int ezport_start_programming(struct spi_device *spi, struct gpio_desc *reset)
{
	struct spi_message msg;
	struct spi_transfer assert_cs = {
		.cs_change   = 1,
	};
	struct spi_transfer release_cs = { };
	int ret;

	spi_bus_lock(spi->controller);

	/* assert chip select */
	spi_message_init(&msg);
	spi_message_add_tail(&assert_cs, &msg);
	ret = spi_sync_locked(spi, &msg);
	if (ret)
		goto fail;

	msleep(EZPORT_STARTUP_DELAY_MS);

	/* reset with asserted chip select to switch into programming mode */
	ezport_reset(reset);

	/* release chip select */
	spi_message_init(&msg);
	spi_message_add_tail(&release_cs, &msg);
	ret = spi_sync_locked(spi, &msg);

fail:
	spi_bus_unlock(spi->controller);
	return ret;
}

static void ezport_stop_programming(struct spi_device *spi, struct gpio_desc *reset)
{
	/* reset without asserted chip select to return into normal mode */
	spi_bus_lock(spi->controller);
	ezport_reset(reset);
	spi_bus_unlock(spi->controller);
}

static int ezport_get_status_register(struct spi_device *spi)
{
	int ret;

	ret = spi_w8r8(spi, EZPORT_CMD_RDSR);
	if (ret < 0)
		return ret;
	if (ret == 0xff) {
		dev_err(&spi->dev, "Invalid EzPort status, EzPort is not functional!\n");
		return -EINVAL;
	}

	return ret;
}

static int ezport_soft_reset(struct spi_device *spi)
{
	u8 cmd = EZPORT_CMD_RESET;
	int ret;

	ret = spi_write(spi, &cmd, 1);
	if (ret < 0)
		return ret;

	msleep(EZPORT_STARTUP_DELAY_MS);

	return 0;
}

static int ezport_send_simple(struct spi_device *spi, u8 cmd)
{
	int ret;

	ret = spi_write(spi, &cmd, 1);
	if (ret < 0)
		return ret;

	return ezport_get_status_register(spi);
}

static int ezport_wait_write(struct spi_device *spi, u32 retries)
{
	int ret;
	u32 i;

	for (i = 0; i < retries; i++) {
		ret = ezport_get_status_register(spi);
		if (ret >= 0 && !(ret & EZPORT_STATUS_WIP))
			break;
		msleep(EZPORT_WRITE_WAIT_MS);
	}

	return ret;
}

static int ezport_write_enable(struct spi_device *spi)
{
	int ret = 0, retries = 3;

	for (retries = 0; retries < 3; retries++) {
		ret = ezport_send_simple(spi, EZPORT_CMD_WREN);
		if (ret > 0 && ret & EZPORT_STATUS_WEN)
			break;
	}

	if (!(ret & EZPORT_STATUS_WEN)) {
		dev_err(&spi->dev, "EzPort write enable timed out\n");
		return -ETIMEDOUT;
	}
	return 0;
}

static int ezport_bulk_erase(struct spi_device *spi)
{
	int ret;
	static const u8 cmd = EZPORT_CMD_BE;

	dev_dbg(&spi->dev, "EzPort bulk erase...\n");

	ret = ezport_write_enable(spi);
	if (ret < 0)
		return ret;

	ret = spi_write(spi, &cmd, 1);
	if (ret < 0)
		return ret;

	ret = ezport_wait_write(spi, 1000);
	if (ret < 0)
		return ret;

	return 0;
}

static int ezport_section_erase(struct spi_device *spi, u32 address)
{
	u8 query[] = {EZPORT_CMD_SE, (address >> 16) & 0xff, (address >> 8) & 0xff, address & 0xff};
	int ret;

	dev_dbg(&spi->dev, "Ezport section erase @ 0x%06x...\n", address);

	if (address & EZPORT_SECTOR_MASK)
		return -EINVAL;

	ret = ezport_write_enable(spi);
	if (ret < 0)
		return ret;

	ret = spi_write(spi, query, sizeof(query));
	if (ret < 0)
		return ret;

	return ezport_wait_write(spi, 200);
}

static int ezport_flash_transfer(struct spi_device *spi, u32 address,
				 const u8 *payload, size_t payload_size)
{
	struct spi_transfer xfers[2] = {};
	u8 *command;
	int ret;

	dev_dbg(&spi->dev, "EzPort write %zu bytes @ 0x%06x...\n", payload_size, address);

	ret = ezport_write_enable(spi);
	if (ret < 0)
		return ret;

	command = kmalloc(4, GFP_KERNEL | GFP_DMA);
	if (!command)
		return -ENOMEM;

	command[0] = EZPORT_CMD_SP;
	command[1] = address >> 16;
	command[2] = address >> 8;
	command[3] = address >> 0;

	xfers[0].tx_buf = command;
	xfers[0].len = 4;

	xfers[1].tx_buf = payload;
	xfers[1].len = payload_size;

	ret = spi_sync_transfer(spi, xfers, 2);
	kfree(command);
	if (ret < 0)
		return ret;

	return ezport_wait_write(spi, 40);
}

static int ezport_flash_compare(struct spi_device *spi, u32 address,
				const u8 *payload, size_t payload_size)
{
	struct spi_transfer xfers[2] = {};
	u8 *buffer;
	int ret;

	buffer = kmalloc(payload_size + 5, GFP_KERNEL | GFP_DMA);
	if (!buffer)
		return -ENOMEM;

	buffer[0] = EZPORT_CMD_FAST_READ;
	buffer[1] = address >> 16;
	buffer[2] = address >> 8;
	buffer[3] = address >> 0;

	xfers[0].tx_buf = buffer;
	xfers[0].len = 4;
	xfers[0].speed_hz = ACHC_FAST_READ_FREQ_HZ;

	xfers[1].rx_buf = buffer + 4;
	xfers[1].len = payload_size + 1;
	xfers[1].speed_hz = ACHC_FAST_READ_FREQ_HZ;

	ret = spi_sync_transfer(spi, xfers, 2);
	if (ret)
		goto err;

	/* FAST_READ receives one dummy byte before the real data */
	ret = memcmp(payload, buffer + 4 + 1, payload_size);
	if (ret) {
		ret = -EBADMSG;
		dev_dbg(&spi->dev, "Verification failure @ %06x", address);
		print_hex_dump_bytes("fw:  ", DUMP_PREFIX_OFFSET, payload, payload_size);
		print_hex_dump_bytes("dev: ", DUMP_PREFIX_OFFSET, buffer + 4, payload_size);
	}

err:
	kfree(buffer);
	return ret;
}

static int ezport_firmware_compare_data(struct spi_device *spi,
					const u8 *data, size_t size)
{
	int ret;
	size_t address = 0;
	size_t transfer_size;

	dev_dbg(&spi->dev, "EzPort compare data with %zu bytes...\n", size);

	ret = ezport_get_status_register(spi);
	if (ret < 0)
		return ret;

	if (ret & EZPORT_STATUS_FS) {
		dev_info(&spi->dev, "Device is in secure mode (status=0x%02x)!\n", ret);
		dev_info(&spi->dev, "FW verification is not possible\n");
		return -EACCES;
	}

	while (size - address > 0) {
		transfer_size = min((size_t) EZPORT_TRANSFER_SIZE, size - address);

		ret = ezport_flash_compare(spi, address, data+address, transfer_size);
		if (ret)
			return ret;

		address += transfer_size;
	}

	return 0;
}

static int ezport_firmware_flash_data(struct spi_device *spi,
				      const u8 *data, size_t size)
{
	int ret;
	size_t address = 0;
	size_t transfer_size;

	dev_dbg(&spi->dev, "EzPort flash data with %zu bytes...\n", size);

	ret = ezport_get_status_register(spi);
	if (ret < 0)
		return ret;

	if (ret & EZPORT_STATUS_FS) {
		ret = ezport_bulk_erase(spi);
		if (ret < 0)
			return ret;
		if (ret & EZPORT_STATUS_FS)
			return -EINVAL;
	}

	while (size - address > 0) {
		if (!(address & EZPORT_SECTOR_MASK)) {
			ret = ezport_section_erase(spi, address);
			if (ret < 0)
				return ret;
			if (ret & EZPORT_STATUS_WIP || ret & EZPORT_STATUS_WEF)
				return -EIO;
		}

		transfer_size = min((size_t) EZPORT_TRANSFER_SIZE, size - address);

		ret = ezport_flash_transfer(spi, address,
					    data+address, transfer_size);
		if (ret < 0)
			return ret;
		else if (ret & EZPORT_STATUS_WIP)
			return -ETIMEDOUT;
		else if (ret & EZPORT_STATUS_WEF)
			return -EIO;

		address += transfer_size;
	}

	dev_dbg(&spi->dev, "EzPort verify flashed data...\n");
	ret = ezport_firmware_compare_data(spi, data, size);

	/* allow missing FW verfication in secure mode */
	if (ret == -EACCES)
		ret = 0;

	if (ret < 0)
		dev_err(&spi->dev, "Failed to verify flashed data: %d\n", ret);

	ret = ezport_soft_reset(spi);
	if (ret < 0)
		dev_warn(&spi->dev, "EzPort reset failed!\n");

	return ret;
}

static int ezport_firmware_load(struct spi_device *spi, const char *fwname)
{
	const struct firmware *fw;
	int ret;

	ret = request_firmware(&fw, fwname, &spi->dev);
	if (ret) {
		dev_err(&spi->dev, "Could not get firmware: %d\n", ret);
		return ret;
	}

	ret = ezport_firmware_flash_data(spi, fw->data, fw->size);

	release_firmware(fw);

	return ret;
}

/**
 * ezport_flash - flash device firmware
 * @spi: SPI device for NXP EzPort interface
 * @reset: the gpio connected to the device reset pin
 * @fwname: filename of the firmware that should be flashed
 *
 * Context: can sleep
 *
 * Return: 0 on success; negative errno on failure
 */
static int ezport_flash(struct spi_device *spi, struct gpio_desc *reset, const char *fwname)
{
	int ret;

	ret = ezport_start_programming(spi, reset);
	if (ret)
		return ret;

	ret = ezport_firmware_load(spi, fwname);

	ezport_stop_programming(spi, reset);

	if (ret)
		dev_err(&spi->dev, "Failed to flash firmware: %d\n", ret);
	else
		dev_dbg(&spi->dev, "Finished FW flashing!\n");

	return ret;
}

static ssize_t update_firmware_store(struct device *dev, struct device_attribute *attr,
				     const char *buf, size_t count)
{
	struct achc_data *achc = dev_get_drvdata(dev);
	unsigned long value;
	int ret;

	ret = kstrtoul(buf, 0, &value);
	if (ret < 0 || value != 1)
		return -EINVAL;

	mutex_lock(&achc->device_lock);
	ret = ezport_flash(achc->ezport, achc->reset, "achc.bin");
	mutex_unlock(&achc->device_lock);

	if (ret < 0)
		return ret;

	return count;
}
static DEVICE_ATTR_WO(update_firmware);

static ssize_t reset_show(struct device *dev, struct device_attribute *attr, char *buf)
{
	struct achc_data *achc = dev_get_drvdata(dev);
	int ret;

	mutex_lock(&achc->device_lock);
	ret = gpiod_get_value(achc->reset);
	mutex_unlock(&achc->device_lock);

	if (ret < 0)
		return ret;

	return sysfs_emit(buf, "%d\n", ret);
}

static ssize_t reset_store(struct device *dev, struct device_attribute *attr,
			   const char *buf, size_t count)
{
	struct achc_data *achc = dev_get_drvdata(dev);
	unsigned long value;
	int ret;

	ret = kstrtoul(buf, 0, &value);
	if (ret < 0 || value > 1)
		return -EINVAL;

	mutex_lock(&achc->device_lock);
	gpiod_set_value(achc->reset, value);
	mutex_unlock(&achc->device_lock);

	return count;
}
static DEVICE_ATTR_RW(reset);

static struct attribute *gehc_achc_attrs[] = {
	&dev_attr_update_firmware.attr,
	&dev_attr_reset.attr,
	NULL,
};
ATTRIBUTE_GROUPS(gehc_achc);

static void unregister_ezport(void *data)
{
	struct spi_device *ezport = data;

	spi_unregister_device(ezport);
}

static int gehc_achc_probe(struct spi_device *spi)
{
	struct achc_data *achc;
	int ezport_reg, ret;

	spi->max_speed_hz = ACHC_MAX_FREQ_HZ;
	spi->bits_per_word = 8;
	spi->mode = SPI_MODE_0;

	achc = devm_kzalloc(&spi->dev, sizeof(*achc), GFP_KERNEL);
	if (!achc)
		return -ENOMEM;
	spi_set_drvdata(spi, achc);
	achc->main = spi;

	mutex_init(&achc->device_lock);

	ret = of_property_read_u32_index(spi->dev.of_node, "reg", 1, &ezport_reg);
	if (ret)
		return dev_err_probe(&spi->dev, ret, "missing second reg entry!\n");

	achc->ezport = spi_new_ancillary_device(spi, ezport_reg);
	if (IS_ERR(achc->ezport))
		return PTR_ERR(achc->ezport);

	ret = devm_add_action_or_reset(&spi->dev, unregister_ezport, achc->ezport);
	if (ret)
		return ret;

	achc->reset = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW);
	if (IS_ERR(achc->reset))
		return dev_err_probe(&spi->dev, PTR_ERR(achc->reset), "Could not get reset gpio\n");

	return 0;
}

static const struct spi_device_id gehc_achc_id[] = {
	{ "ge,achc", 0 },
	{ "achc", 0 },
	{ }
};
MODULE_DEVICE_TABLE(spi, gehc_achc_id);

static const struct of_device_id gehc_achc_of_match[] = {
	{ .compatible = "ge,achc" },
	{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, gehc_achc_of_match);

static struct spi_driver gehc_achc_spi_driver = {
	.driver = {
		.name	= "gehc-achc",
		.of_match_table = gehc_achc_of_match,
		.dev_groups = gehc_achc_groups,
	},
	.probe		= gehc_achc_probe,
	.id_table	= gehc_achc_id,
};
module_spi_driver(gehc_achc_spi_driver);

MODULE_DESCRIPTION("GEHC ACHC driver");
MODULE_AUTHOR("Sebastian Reichel <sebastian.reichel@collabora.com>");
MODULE_LICENSE("GPL");