1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
|
// SPDX-License-Identifier: GPL-2.0-only
/* Copyright(c) 2022 Intel Corporation. All rights reserved. */
#include <linux/device.h>
#include <linux/module.h>
#include <linux/pci.h>
#include "cxlmem.h"
#include "cxlpci.h"
/**
* DOC: cxl mem
*
* CXL memory endpoint devices and switches are CXL capable devices that are
* participating in CXL.mem protocol. Their functionality builds on top of the
* CXL.io protocol that allows enumerating and configuring components via
* standard PCI mechanisms.
*
* The cxl_mem driver owns kicking off the enumeration of this CXL.mem
* capability. With the detection of a CXL capable endpoint, the driver will
* walk up to find the platform specific port it is connected to, and determine
* if there are intervening switches in the path. If there are switches, a
* secondary action is to enumerate those (implemented in cxl_core). Finally the
* cxl_mem driver adds the device it is bound to as a CXL endpoint-port for use
* in higher level operations.
*/
static int create_endpoint(struct cxl_memdev *cxlmd,
struct cxl_port *parent_port)
{
struct cxl_dev_state *cxlds = cxlmd->cxlds;
struct cxl_port *endpoint;
endpoint = devm_cxl_add_port(&parent_port->dev, &cxlmd->dev,
cxlds->component_reg_phys, parent_port);
if (IS_ERR(endpoint))
return PTR_ERR(endpoint);
dev_dbg(&cxlmd->dev, "add: %s\n", dev_name(&endpoint->dev));
if (!endpoint->dev.driver) {
dev_err(&cxlmd->dev, "%s failed probe\n",
dev_name(&endpoint->dev));
return -ENXIO;
}
return cxl_endpoint_autoremove(cxlmd, endpoint);
}
/**
* cxl_hdm_decode_init() - Setup HDM decoding for the endpoint
* @cxlds: Device state
*
* Additionally, enables global HDM decoding. Warning: don't call this outside
* of probe. Once probe is complete, the port driver owns all access to the HDM
* decoder registers.
*
* Returns: false if DVSEC Ranges are being used instead of HDM
* decoders, or if it can not be determined if DVSEC Ranges are in use.
* Otherwise, returns true.
*/
__mock bool cxl_hdm_decode_init(struct cxl_dev_state *cxlds)
{
struct cxl_endpoint_dvsec_info *info = &cxlds->info;
struct cxl_register_map map;
struct cxl_component_reg_map *cmap = &map.component_map;
bool global_enable, retval = false;
void __iomem *crb;
u32 global_ctrl;
if (info->ranges < 0)
return false;
/* map hdm decoder */
crb = ioremap(cxlds->component_reg_phys, CXL_COMPONENT_REG_BLOCK_SIZE);
if (!crb) {
dev_dbg(cxlds->dev, "Failed to map component registers\n");
return false;
}
cxl_probe_component_regs(cxlds->dev, crb, cmap);
if (!cmap->hdm_decoder.valid) {
dev_dbg(cxlds->dev, "Invalid HDM decoder registers\n");
goto out;
}
global_ctrl = readl(crb + cmap->hdm_decoder.offset +
CXL_HDM_DECODER_CTRL_OFFSET);
global_enable = global_ctrl & CXL_HDM_DECODER_ENABLE;
/*
* Per CXL 2.0 Section 8.1.3.8.3 and 8.1.3.8.4 DVSEC CXL Range 1 Base
* [High,Low] when HDM operation is enabled the range register values
* are ignored by the device, but the spec also recommends matching the
* DVSEC Range 1,2 to HDM Decoder Range 0,1. So, non-zero info->ranges
* are expected even though Linux does not require or maintain that
* match.
*/
if (!global_enable && info->ranges)
goto out;
retval = true;
/*
* Permanently (for this boot at least) opt the device into HDM
* operation. Individual HDM decoders still need to be enabled after
* this point.
*/
if (!global_enable) {
dev_dbg(cxlds->dev, "Enabling HDM decode\n");
writel(global_ctrl | CXL_HDM_DECODER_ENABLE,
crb + cmap->hdm_decoder.offset +
CXL_HDM_DECODER_CTRL_OFFSET);
}
out:
iounmap(crb);
return retval;
}
static void enable_suspend(void *data)
{
cxl_mem_active_dec();
}
static int cxl_mem_probe(struct device *dev)
{
struct cxl_memdev *cxlmd = to_cxl_memdev(dev);
struct cxl_dev_state *cxlds = cxlmd->cxlds;
struct cxl_port *parent_port;
int rc;
/*
* Someone is trying to reattach this device after it lost its port
* connection (an endpoint port previously registered by this memdev was
* disabled). This racy check is ok because if the port is still gone,
* no harm done, and if the port hierarchy comes back it will re-trigger
* this probe. Port rescan and memdev detach work share the same
* single-threaded workqueue.
*/
if (work_pending(&cxlmd->detach_work))
return -EBUSY;
rc = cxlds->wait_media_ready(cxlds);
if (rc) {
dev_err(dev, "Media not active (%d)\n", rc);
return rc;
}
/*
* If DVSEC ranges are being used instead of HDM decoder registers there
* is no use in trying to manage those.
*/
if (!cxl_hdm_decode_init(cxlds)) {
dev_err(dev,
"Legacy range registers configuration prevents HDM operation.\n");
return -EBUSY;
}
rc = devm_cxl_enumerate_ports(cxlmd);
if (rc)
return rc;
parent_port = cxl_mem_find_port(cxlmd);
if (!parent_port) {
dev_err(dev, "CXL port topology not found\n");
return -ENXIO;
}
device_lock(&parent_port->dev);
if (!parent_port->dev.driver) {
dev_err(dev, "CXL port topology %s not enabled\n",
dev_name(&parent_port->dev));
rc = -ENXIO;
goto out;
}
rc = create_endpoint(cxlmd, parent_port);
out:
device_unlock(&parent_port->dev);
put_device(&parent_port->dev);
/*
* The kernel may be operating out of CXL memory on this device,
* there is no spec defined way to determine whether this device
* preserves contents over suspend, and there is no simple way
* to arrange for the suspend image to avoid CXL memory which
* would setup a circular dependency between PCI resume and save
* state restoration.
*
* TODO: support suspend when all the regions this device is
* hosting are locked and covered by the system address map,
* i.e. platform firmware owns restoring the HDM configuration
* that it locked.
*/
cxl_mem_active_inc();
return devm_add_action_or_reset(dev, enable_suspend, NULL);
}
static struct cxl_driver cxl_mem_driver = {
.name = "cxl_mem",
.probe = cxl_mem_probe,
.id = CXL_DEVICE_MEMORY_EXPANDER,
};
module_cxl_driver(cxl_mem_driver);
MODULE_LICENSE("GPL v2");
MODULE_IMPORT_NS(CXL);
MODULE_ALIAS_CXL(CXL_DEVICE_MEMORY_EXPANDER);
/*
* create_endpoint() wants to validate port driver attach immediately after
* endpoint registration.
*/
MODULE_SOFTDEP("pre: cxl_port");
|
