1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
|
// SPDX-License-Identifier: GPL-2.0-only
/*
* Ralink RT288x SoC PCI register definitions
*
* Copyright (C) 2009 John Crispin <john@phrozen.org>
* Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
*
* Parts of this file are based on Ralink's 2.6.21 BSP
*/
#include <linux/delay.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/io.h>
#include <linux/init.h>
#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <asm/mach-ralink/rt288x.h>
#define RT2880_PCI_BASE 0x00440000
#define RT288X_CPU_IRQ_PCI 4
#define RT2880_PCI_MEM_BASE 0x20000000
#define RT2880_PCI_MEM_SIZE 0x10000000
#define RT2880_PCI_IO_BASE 0x00460000
#define RT2880_PCI_IO_SIZE 0x00010000
#define RT2880_PCI_REG_PCICFG_ADDR 0x00
#define RT2880_PCI_REG_PCIMSK_ADDR 0x0c
#define RT2880_PCI_REG_BAR0SETUP_ADDR 0x10
#define RT2880_PCI_REG_IMBASEBAR0_ADDR 0x18
#define RT2880_PCI_REG_CONFIG_ADDR 0x20
#define RT2880_PCI_REG_CONFIG_DATA 0x24
#define RT2880_PCI_REG_MEMBASE 0x28
#define RT2880_PCI_REG_IOBASE 0x2c
#define RT2880_PCI_REG_ID 0x30
#define RT2880_PCI_REG_CLASS 0x34
#define RT2880_PCI_REG_SUBID 0x38
#define RT2880_PCI_REG_ARBCTL 0x80
static void __iomem *rt2880_pci_base;
static u32 rt2880_pci_reg_read(u32 reg)
{
return readl(rt2880_pci_base + reg);
}
static void rt2880_pci_reg_write(u32 val, u32 reg)
{
writel(val, rt2880_pci_base + reg);
}
static inline u32 rt2880_pci_get_cfgaddr(unsigned int bus, unsigned int slot,
unsigned int func, unsigned int where)
{
return ((bus << 16) | (slot << 11) | (func << 8) | (where & 0xfc) |
0x80000000);
}
static int rt2880_pci_config_read(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 *val)
{
u32 address;
u32 data;
address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
PCI_FUNC(devfn), where);
rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
switch (size) {
case 1:
*val = (data >> ((where & 3) << 3)) & 0xff;
break;
case 2:
*val = (data >> ((where & 3) << 3)) & 0xffff;
break;
case 4:
*val = data;
break;
}
return PCIBIOS_SUCCESSFUL;
}
static int rt2880_pci_config_write(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 val)
{
u32 address;
u32 data;
address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
PCI_FUNC(devfn), where);
rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
switch (size) {
case 1:
data = (data & ~(0xff << ((where & 3) << 3))) |
(val << ((where & 3) << 3));
break;
case 2:
data = (data & ~(0xffff << ((where & 3) << 3))) |
(val << ((where & 3) << 3));
break;
case 4:
data = val;
break;
}
rt2880_pci_reg_write(data, RT2880_PCI_REG_CONFIG_DATA);
return PCIBIOS_SUCCESSFUL;
}
static struct pci_ops rt2880_pci_ops = {
.read = rt2880_pci_config_read,
.write = rt2880_pci_config_write,
};
static struct resource rt2880_pci_mem_resource = {
.name = "PCI MEM space",
.start = RT2880_PCI_MEM_BASE,
.end = RT2880_PCI_MEM_BASE + RT2880_PCI_MEM_SIZE - 1,
.flags = IORESOURCE_MEM,
};
static struct resource rt2880_pci_io_resource = {
.name = "PCI IO space",
.start = RT2880_PCI_IO_BASE,
.end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1,
.flags = IORESOURCE_IO,
};
static struct pci_controller rt2880_pci_controller = {
.pci_ops = &rt2880_pci_ops,
.mem_resource = &rt2880_pci_mem_resource,
.io_resource = &rt2880_pci_io_resource,
};
static inline u32 rt2880_pci_read_u32(unsigned long reg)
{
u32 address;
u32 ret;
address = rt2880_pci_get_cfgaddr(0, 0, 0, reg);
rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
ret = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
return ret;
}
static inline void rt2880_pci_write_u32(unsigned long reg, u32 val)
{
u32 address;
address = rt2880_pci_get_cfgaddr(0, 0, 0, reg);
rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
rt2880_pci_reg_write(val, RT2880_PCI_REG_CONFIG_DATA);
}
int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq = -1;
if (dev->bus->number != 0)
return irq;
switch (PCI_SLOT(dev->devfn)) {
case 0x00:
break;
case 0x11:
irq = RT288X_CPU_IRQ_PCI;
break;
default:
pr_err("%s:%s[%d] trying to alloc unknown pci irq\n",
__FILE__, __func__, __LINE__);
BUG();
break;
}
return irq;
}
static int rt288x_pci_probe(struct platform_device *pdev)
{
void __iomem *io_map_base;
rt2880_pci_base = ioremap(RT2880_PCI_BASE, PAGE_SIZE);
io_map_base = ioremap(RT2880_PCI_IO_BASE, RT2880_PCI_IO_SIZE);
rt2880_pci_controller.io_map_base = (unsigned long) io_map_base;
set_io_port_base((unsigned long) io_map_base);
ioport_resource.start = RT2880_PCI_IO_BASE;
ioport_resource.end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1;
rt2880_pci_reg_write(0, RT2880_PCI_REG_PCICFG_ADDR);
udelay(1);
rt2880_pci_reg_write(0x79, RT2880_PCI_REG_ARBCTL);
rt2880_pci_reg_write(0x07FF0001, RT2880_PCI_REG_BAR0SETUP_ADDR);
rt2880_pci_reg_write(RT2880_PCI_MEM_BASE, RT2880_PCI_REG_MEMBASE);
rt2880_pci_reg_write(RT2880_PCI_IO_BASE, RT2880_PCI_REG_IOBASE);
rt2880_pci_reg_write(0x08000000, RT2880_PCI_REG_IMBASEBAR0_ADDR);
rt2880_pci_reg_write(0x08021814, RT2880_PCI_REG_ID);
rt2880_pci_reg_write(0x00800001, RT2880_PCI_REG_CLASS);
rt2880_pci_reg_write(0x28801814, RT2880_PCI_REG_SUBID);
rt2880_pci_reg_write(0x000c0000, RT2880_PCI_REG_PCIMSK_ADDR);
rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000);
(void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0);
rt2880_pci_controller.of_node = pdev->dev.of_node;
register_pci_controller(&rt2880_pci_controller);
return 0;
}
int pcibios_plat_dev_init(struct pci_dev *dev)
{
static bool slot0_init;
/*
* Nobody seems to initialize slot 0, but this platform requires it, so
* do it once when some other slot is being enabled. The PCI subsystem
* should configure other slots properly, so no need to do anything
* special for those.
*/
if (!slot0_init && dev->bus->number == 0) {
u16 cmd;
u32 bar0;
slot0_init = true;
pci_bus_write_config_dword(dev->bus, 0, PCI_BASE_ADDRESS_0,
0x08000000);
pci_bus_read_config_dword(dev->bus, 0, PCI_BASE_ADDRESS_0,
&bar0);
pci_bus_read_config_word(dev->bus, 0, PCI_COMMAND, &cmd);
cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
pci_bus_write_config_word(dev->bus, 0, PCI_COMMAND, cmd);
}
return 0;
}
static const struct of_device_id rt288x_pci_match[] = {
{ .compatible = "ralink,rt288x-pci" },
{},
};
static struct platform_driver rt288x_pci_driver = {
.probe = rt288x_pci_probe,
.driver = {
.name = "rt288x-pci",
.of_match_table = rt288x_pci_match,
},
};
int __init pcibios_init(void)
{
int ret = platform_driver_register(&rt288x_pci_driver);
if (ret)
pr_info("rt288x-pci: Error registering platform driver!");
return ret;
}
arch_initcall(pcibios_init);
|
