1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Device Tree file for Seagate Blackarmor NAS220
*
* Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com>
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "kirkwood.dtsi"
#include "kirkwood-6192.dtsi"
/ {
model = "Seagate Blackarmor NAS220";
compatible = "seagate,blackarmor-nas220","marvell,kirkwood-88f6192",
"marvell,kirkwood";
memory { /* 128 MB */
device_type = "memory";
reg = <0x00000000 0x8000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8";
stdout-path = &uart0;
};
gpio_poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
gpio_keys {
compatible = "gpio-keys";
button-reset {
label = "Reset";
linux,code = <KEY_POWER>;
gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
button-power {
label = "Power";
linux,code = <KEY_SLEEP>;
gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
};
};
gpio-leds {
compatible = "gpio-leds";
blue-power {
label = "nas220:blue:power";
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_power_sata0 &pmx_power_sata1>;
pinctrl-names = "default";
sata0_power: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "SATA0 Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 24 GPIO_ACTIVE_LOW>;
};
sata1_power: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "SATA1 Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 28 GPIO_ACTIVE_LOW>;
};
};
};
/*
* Serial port routed to connector CN5
*
* pin 1 - TX (CPU's TX)
* pin 4 - RX (CPU's RX)
* pin 6 - GND
*/
&uart0 {
status = "okay";
};
&pinctrl {
pinctrl-0 = <&pmx_button_reset &pmx_button_power>;
pinctrl-names = "default";
pmx_act_sata0: pmx-act-sata0 {
marvell,pins = "mpp15";
marvell,function = "sata0";
};
pmx_act_sata1: pmx-act-sata1 {
marvell,pins = "mpp16";
marvell,function = "sata1";
};
pmx_power_sata0: pmx-power-sata0 {
marvell,pins = "mpp24";
marvell,function = "gpio";
};
pmx_power_sata1: pmx-power-sata1 {
marvell,pins = "mpp28";
marvell,function = "gpio";
};
pmx_button_reset: pmx-button-reset {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
pmx_button_power: pmx-button-power {
marvell,pins = "mpp26";
marvell,function = "gpio";
};
};
&sata {
status = "okay";
nr-ports = <2>;
};
&i2c0 {
status = "okay";
adt7476: thermal@2e {
compatible = "adi,adt7476";
reg = <0x2e>;
};
};
&nand {
status = "okay";
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@8 {
reg = <8>;
};
};
ð0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <ðphy0>;
};
};
|
