1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for Lenovo Iomega ix4-300d
*
* Copyright (C) 2014, Benoit Masson <yahoo@perenite.com>
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include "armada-xp-mv78230.dtsi"
/ {
model = "Lenovo Iomega ix4-300d";
compatible = "lenovo,ix4-300d", "marvell,armadaxp-mv78230",
"marvell,armadaxp", "marvell,armada-370-xp";
chosen {
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0 0x00000000 0 0x20000000>; /* 512MB */
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
internal-regs {
serial@12000 {
status = "okay";
};
ethernet@70000 {
pinctrl-0 = <&ge0_rgmii_pins>;
pinctrl-names = "default";
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
ethernet@74000 {
pinctrl-0 = <&ge1_rgmii_pins>;
pinctrl-names = "default";
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
};
usb@50000 {
status = "okay";
};
usb@51000 {
status = "okay";
};
i2c@11000 {
clock-frequency = <400000>;
status = "okay";
adt7473@2e {
compatible = "adi,adt7473";
reg = <0x2e>;
};
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
pcf8563@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
};
nand-controller@d0000 {
status = "okay";
nand@0 {
reg = <0>;
label = "pxa3xx_nand-0";
nand-rb = <0>;
nand-on-flash-bbt;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x00000000 0x000e0000>;
read-only;
};
partition@e0000 {
label = "u-boot-env";
reg = <0x000e0000 0x00020000>;
read-only;
};
partition@100000 {
label = "u-boot-env2";
reg = <0x00100000 0x00020000>;
read-only;
};
partition@120000 {
label = "zImage";
reg = <0x00120000 0x00400000>;
};
partition@520000 {
label = "initrd";
reg = <0x00520000 0x00400000>;
};
partition@e00000 {
label = "boot";
reg = <0x00e00000 0x3f200000>;
};
};
};
};
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&power_button_pin &reset_button_pin
&select_button_pin &scroll_button_pin>;
pinctrl-names = "default";
power-button {
label = "Power Button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
};
reset-button {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
};
select-button {
label = "Select Button";
linux,code = <BTN_SELECT>;
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
scroll-button {
label = "Scroll Button";
linux,code = <KEY_SCROLLDOWN>;
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
};
spi-3 {
compatible = "spi-gpio";
status = "okay";
sck-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
mosi-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; /*gpio 47*/
cs-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
num-chipselects = <1>;
#address-cells = <1>;
#size-cells = <0>;
gpio_spi: gpio_spi@0 {
compatible = "fairchild,74hc595";
gpio-controller;
#gpio-cells = <2>;
reg = <0>;
registers-number = <1>;
spi-max-frequency = <100000>;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&hdd_led_pin>;
pinctrl-names = "default";
hdd-led {
label = "ix4-300d:hdd:blue";
gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
power-led {
label = "ix4-300d:power:white";
gpios = <&gpio_spi 1 GPIO_ACTIVE_LOW>;
/* init blinking while booting */
linux,default-trigger = "timer";
default-state = "on";
};
sysfail-led {
label = "ix4-300d:sysfail:red";
gpios = <&gpio_spi 2 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
sys-led {
label = "ix4-300d:sys:blue";
gpios = <&gpio_spi 3 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
hddfail-led {
label = "ix4-300d:hddfail:red";
gpios = <&gpio_spi 4 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
/*
* Warning: you need both eth1 & 0 PHY initialized (i.e having
* them up does the tweak) for poweroff to shutdown otherwise it
* reboots
*/
gpio-poweroff {
compatible = "gpio-poweroff";
pinctrl-0 = <&poweroff_pin>;
pinctrl-names = "default";
gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
};
};
&pciec {
status = "okay";
/* Quad port sata: Marvell 88SX7042 */
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
/* USB 3.0 xHCI controller: NEC D720200F1 */
pcie@5,0 {
/* Port 1, Lane 0 */
status = "okay";
};
};
&mdio {
phy0: ethernet-phy@0 { /* Marvell 88E1318 */
reg = <0>;
};
phy1: ethernet-phy@1 { /* Marvell 88E1318 */
reg = <1>;
};
};
&pinctrl {
poweroff_pin: poweroff-pin {
marvell,pins = "mpp24";
marvell,function = "gpio";
};
power_button_pin: power-button-pin {
marvell,pins = "mpp44";
marvell,function = "gpio";
};
reset_button_pin: reset-button-pin {
marvell,pins = "mpp45";
marvell,function = "gpio";
};
select_button_pin: select-button-pin {
marvell,pins = "mpp41";
marvell,function = "gpio";
};
scroll_button_pin: scroll-button-pin {
marvell,pins = "mpp42";
marvell,function = "gpio";
};
hdd_led_pin: hdd-led-pin {
marvell,pins = "mpp26";
marvell,function = "gpio";
};
};
|
