1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for Globalscale Mirabox
*
* Gregory CLEMENT <gregory.clement@free-electrons.com>
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include "armada-370.dtsi"
/ {
model = "Globalscale Mirabox";
compatible = "globalscale,mirabox", "marvell,armada370", "marvell,armada-370-xp";
chosen {
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x00000000 0x20000000>; /* 512 MB */
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
internal-regs {
serial@12000 {
status = "okay";
};
timer@20300 {
clock-frequency = <600000000>;
status = "okay";
};
gpio_leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pwr_led_pin &stat_led_pins>;
green_pwr_led {
label = "mirabox:green:pwr";
gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
blue_stat_led {
label = "mirabox:blue:stat";
gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
default-state = "off";
};
green_stat_led {
label = "mirabox:green:stat";
gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
default-state = "off";
};
};
ethernet@70000 {
pinctrl-0 = <&ge0_rgmii_pins>;
pinctrl-names = "default";
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
ethernet@74000 {
pinctrl-0 = <&ge1_rgmii_pins>;
pinctrl-names = "default";
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
};
crypto@90000 {
status = "okay";
};
mvsdio@d4000 {
pinctrl-0 = <&sdio_pins3>;
pinctrl-names = "default";
status = "okay";
/*
* No CD or WP GPIOs: SDIO interface used for
* Wifi/Bluetooth chip
*/
broken-cd;
};
usb@50000 {
status = "okay";
};
usb@51000 {
status = "okay";
};
i2c@11000 {
status = "okay";
clock-frequency = <100000>;
pca9505: pca9505@25 {
compatible = "nxp,pca9505";
gpio-controller;
#gpio-cells = <2>;
reg = <0x25>;
};
};
};
};
};
&pciec {
status = "okay";
/* Internal mini-PCIe connector */
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
};
/* Connected on the PCB to a USB 3.0 XHCI controller */
pcie@2,0 {
/* Port 1, Lane 0 */
status = "okay";
};
};
&mdio {
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
phy0: ethernet-phy@0 {
reg = <0>;
};
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&pinctrl {
pwr_led_pin: pwr-led-pin {
marvell,pins = "mpp63";
marvell,function = "gpio";
};
stat_led_pins: stat-led-pins {
marvell,pins = "mpp64", "mpp65";
marvell,function = "gpio";
};
};
&nand_controller {
status = "okay";
nand@0 {
reg = <0>;
label = "pxa3xx_nand-0";
nand-rb = <0>;
marvell,nand-keep-config;
nand-on-flash-bbt;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "U-Boot";
reg = <0 0x400000>;
};
partition@400000 {
label = "Linux";
reg = <0x400000 0x400000>;
};
partition@800000 {
label = "Filesystem";
reg = <0x800000 0x3f800000>;
};
};
};
};
|
