1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/thermal/mediatek,lvts-thermal.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek SoC Low Voltage Thermal Sensor (LVTS)
maintainers:
- Balsam CHIHI <bchihi@baylibre.com>
description: |
LVTS is a thermal management architecture composed of three subsystems,
a Sensing device - Thermal Sensing Micro Circuit Unit (TSMCU),
a Converter - Low Voltage Thermal Sensor converter (LVTS), and
a Digital controller (LVTS_CTRL).
properties:
compatible:
enum:
- mediatek,mt7988-lvts-ap
- mediatek,mt8186-lvts
- mediatek,mt8188-lvts-ap
- mediatek,mt8188-lvts-mcu
- mediatek,mt8192-lvts-ap
- mediatek,mt8192-lvts-mcu
- mediatek,mt8195-lvts-ap
- mediatek,mt8195-lvts-mcu
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
maxItems: 1
resets:
maxItems: 1
description: LVTS reset for clearing temporary data on AP/MCU.
nvmem-cells:
minItems: 1
items:
- description: Calibration eFuse data 1 for LVTS
- description: Calibration eFuse data 2 for LVTS
nvmem-cell-names:
minItems: 1
items:
- const: lvts-calib-data-1
- const: lvts-calib-data-2
"#thermal-sensor-cells":
const: 1
allOf:
- $ref: thermal-sensor.yaml#
- if:
properties:
compatible:
contains:
enum:
- mediatek,mt8188-lvts-ap
- mediatek,mt8188-lvts-mcu
- mediatek,mt8192-lvts-ap
- mediatek,mt8192-lvts-mcu
then:
properties:
nvmem-cells:
maxItems: 1
nvmem-cell-names:
maxItems: 1
- if:
properties:
compatible:
contains:
enum:
- mediatek,mt8186-lvts
- mediatek,mt8195-lvts-ap
- mediatek,mt8195-lvts-mcu
then:
properties:
nvmem-cells:
minItems: 2
nvmem-cell-names:
minItems: 2
required:
- compatible
- reg
- interrupts
- clocks
- resets
- nvmem-cells
- nvmem-cell-names
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/mt8195-clk.h>
#include <dt-bindings/reset/mt8195-resets.h>
#include <dt-bindings/thermal/mediatek,lvts-thermal.h>
soc {
#address-cells = <2>;
#size-cells = <2>;
lvts_mcu: thermal-sensor@11278000 {
compatible = "mediatek,mt8195-lvts-mcu";
reg = <0 0x11278000 0 0x1000>;
interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
resets = <&infracfg_ao MT8195_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
nvmem-cell-names = "lvts-calib-data-1", "lvts-calib-data-2";
#thermal-sensor-cells = <1>;
};
};
thermal_zones: thermal-zones {
cpu0-thermal {
polling-delay = <1000>;
polling-delay-passive = <250>;
thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU0>;
trips {
cpu0_alert: trip-alert {
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
cpu0_crit: trip-crit {
temperature = <100000>;
hysteresis = <2000>;
type = "critical";
};
};
};
};
|
