1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/soc/mediatek/mediatek,mutex.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Mediatek mutex
maintainers:
- Chun-Kuang Hu <chunkuang.hu@kernel.org>
- Philipp Zabel <p.zabel@pengutronix.de>
description: |
Mediatek mutex, namely MUTEX, is used to send the triggers signals called
Start Of Frame (SOF) / End Of Frame (EOF) to each sub-modules on the display
data path or MDP data path.
In some SoC, such as mt2701, MUTEX could be a hardware mutex which protects
the shadow register.
MUTEX device node must be siblings to the central MMSYS_CONFIG node.
For a description of the MMSYS_CONFIG binding, see
Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
for details.
properties:
compatible:
enum:
- mediatek,mt2701-disp-mutex
- mediatek,mt2712-disp-mutex
- mediatek,mt6795-disp-mutex
- mediatek,mt8167-disp-mutex
- mediatek,mt8173-disp-mutex
- mediatek,mt8183-disp-mutex
- mediatek,mt8186-disp-mutex
- mediatek,mt8186-mdp3-mutex
- mediatek,mt8188-disp-mutex
- mediatek,mt8192-disp-mutex
- mediatek,mt8195-disp-mutex
- mediatek,mt8195-vpp-mutex
- mediatek,mt8365-disp-mutex
reg:
maxItems: 1
interrupts:
maxItems: 1
power-domains:
description: A phandle and PM domain specifier as defined by bindings of
the power controller specified by phandle. See
Documentation/devicetree/bindings/power/power-domain.yaml for details.
clocks:
items:
- description: MUTEX Clock
mediatek,gce-events:
description:
The event id which is mapping to the specific hardware event signal
to gce. The event id is defined in the gce header
include/dt-bindings/gce/<chip>-gce.h of each chips.
$ref: /schemas/types.yaml#/definitions/uint32-array
mediatek,gce-client-reg:
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
items:
- description: phandle of GCE
- description: GCE subsys id
- description: register offset
- description: register size
description: The register of client driver can be configured by gce with
4 arguments defined in this property. Each GCE subsys id is mapping to
a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
allOf:
- if:
properties:
compatible:
contains:
enum:
- mediatek,mt2701-disp-mutex
- mediatek,mt2712-disp-mutex
- mediatek,mt6795-disp-mutex
- mediatek,mt8173-disp-mutex
- mediatek,mt8186-disp-mutex
- mediatek,mt8186-mdp3-mutex
- mediatek,mt8192-disp-mutex
- mediatek,mt8195-disp-mutex
then:
required:
- clocks
required:
- compatible
- reg
- interrupts
- power-domains
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/mt8173-clk.h>
#include <dt-bindings/power/mt8173-power.h>
#include <dt-bindings/gce/mt8173-gce.h>
soc {
#address-cells = <2>;
#size-cells = <2>;
mutex: mutex@14020000 {
compatible = "mediatek,mt8173-disp-mutex";
reg = <0 0x14020000 0 0x1000>;
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&spm MT8173_POWER_DOMAIN_MM>;
clocks = <&mmsys CLK_MM_MUTEX_32K>;
mediatek,gce-events = <CMDQ_EVENT_MUTEX0_STREAM_EOF>,
<CMDQ_EVENT_MUTEX1_STREAM_EOF>;
};
};
|
