1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
|
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/phy/phy-stm32-usbphyc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: STMicroelectronics STM32 USB HS PHY controller
description:
The STM32 USBPHYC block contains a dual port High Speed UTMI+ PHY and a UTMI
switch. It controls PHY configuration and status, and the UTMI+ switch that
selects either OTG or HOST controller for the second PHY port. It also sets
PLL configuration.
USBPHYC
|_ PLL
|
|_ PHY port#1 _________________ HOST controller
| __ |
| / 1|________________|
|_ PHY port#2 ----| |________________
| \_0| |
|_ UTMI switch_______| OTG controller
maintainers:
- Amelie Delaunay <amelie.delaunay@foss.st.com>
properties:
compatible:
const: st,stm32mp1-usbphyc
reg:
maxItems: 1
clocks:
maxItems: 1
resets:
maxItems: 1
"#address-cells":
const: 1
"#size-cells":
const: 0
vdda1v1-supply:
description: regulator providing 1V1 power supply to the PLL block
vdda1v8-supply:
description: regulator providing 1V8 power supply to the PLL block
'#clock-cells':
description: number of clock cells for ck_usbo_48m consumer
const: 0
#Required child nodes:
patternProperties:
"^usb-phy@[0|1]$":
type: object
description:
Each port the controller provides must be represented as a sub-node.
properties:
reg:
description: phy port index.
maxItems: 1
phy-supply:
description: regulator providing 3V3 power supply to the PHY.
"#phy-cells":
enum: [ 0x0, 0x1 ]
connector:
type: object
$ref: /schemas/connector/usb-connector.yaml
unevaluatedProperties: false
properties:
vbus-supply: true
# It can be necessary to adjust the PHY settings to compensate parasitics, which can be due
# to USB connector/receptacle, routing, ESD protection component,... Here is the list of
# all optional parameters to tune the interface of the PHY (HS for High-Speed, FS for Full-
# Speed, LS for Low-Speed)
st,current-boost-microamp:
description: Current boosting in uA
enum: [ 1000, 2000 ]
st,no-lsfs-fb-cap:
description: Disables the LS/FS feedback capacitor
type: boolean
st,decrease-hs-slew-rate:
description: Decreases the HS driver slew rate by 10%
type: boolean
st,tune-hs-dc-level:
description: |
Tunes the HS driver DC level
- <0> normal level
- <1> increases the level by 5 to 7 mV
- <2> increases the level by 10 to 14 mV
- <3> decreases the level by 5 to 7 mV
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 3
default: 0
st,enable-fs-rftime-tuning:
description: Enables the FS rise/fall tuning option
type: boolean
st,enable-hs-rftime-reduction:
description: Enables the HS rise/fall reduction feature
type: boolean
st,trim-hs-current:
description: |
Controls HS driver current trimming for choke compensation
- <0> = 18.87 mA target current / nominal + 0%
- <1> = 19.165 mA target current / nominal + 1.56%
- <2> = 19.46 mA target current / nominal + 3.12%
- <3> = 19.755 mA target current / nominal + 4.68%
- <4> = 20.05 mA target current / nominal + 6.24%
- <5> = 20.345 mA target current / nominal + 7.8%
- <6> = 20.64 mA target current / nominal + 9.36%
- <7> = 20.935 mA target current / nominal + 10.92%
- <8> = 21.23 mA target current / nominal + 12.48%
- <9> = 21.525 mA target current / nominal + 14.04%
- <10> = 21.82 mA target current / nominal + 15.6%
- <11> = 22.115 mA target current / nominal + 17.16%
- <12> = 22.458 mA target current / nominal + 19.01%
- <13> = 22.755 mA target current / nominal + 20.58%
- <14> = 23.052 mA target current / nominal + 22.16%
- <15> = 23.348 mA target current / nominal + 23.73%
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 15
default: 0
st,trim-hs-impedance:
description: |
Controls HS driver impedance tuning for choke compensation
- <0> = no impedance offset
- <1> = reduce the impedance by 2 ohms
- <2> = reduce the impedance by 4 ohms
- <3> = reduce the impedance by 6 ohms
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 3
default: 0
st,tune-squelch-level:
description: |
Tunes the squelch DC threshold value
- <0> = no shift in threshold
- <1> = threshold shift by +7 mV
- <2> = threshold shift by -5 mV
- <3> = threshold shift by +14 mV
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 3
default: 0
st,enable-hs-rx-gain-eq:
description: Enables the HS Rx gain equalizer
type: boolean
st,tune-hs-rx-offset:
description: |
Adjusts the HS Rx offset
- <0> = no offset
- <1> = offset of +5 mV
- <2> = offset of +10 mV
- <3> = offset of -5 mV
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 3
default: 0
st,no-hs-ftime-ctrl:
description: Disables the HS fall time control of single ended signals during pre-emphasis
type: boolean
st,no-lsfs-sc:
description: Disables the short circuit protection in LS/FS driver
type: boolean
st,enable-hs-tx-staggering:
description: Enables the basic staggering in HS Tx mode
type: boolean
allOf:
- if:
properties:
reg:
const: 0
then:
properties:
"#phy-cells":
const: 0
else:
properties:
"#phy-cells":
const: 1
description:
The value is used to select UTMI switch output.
0 for OTG controller and 1 for Host controller.
required:
- reg
- phy-supply
- "#phy-cells"
additionalProperties: false
required:
- compatible
- reg
- clocks
- "#address-cells"
- "#size-cells"
- vdda1v1-supply
- vdda1v8-supply
- usb-phy@0
- usb-phy@1
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/stm32mp1-clks.h>
#include <dt-bindings/reset/stm32mp1-resets.h>
usbphyc: usbphyc@5a006000 {
compatible = "st,stm32mp1-usbphyc";
reg = <0x5a006000 0x1000>;
clocks = <&rcc USBPHY_K>;
resets = <&rcc USBPHY_R>;
vdda1v1-supply = <®11>;
vdda1v8-supply = <®18>;
#address-cells = <1>;
#size-cells = <0>;
#clock-cells = <0>;
usbphyc_port0: usb-phy@0 {
reg = <0>;
phy-supply = <&vdd_usb>;
#phy-cells = <0>;
st,tune-hs-dc-level = <2>;
st,enable-fs-rftime-tuning;
st,enable-hs-rftime-reduction;
st,trim-hs-current = <15>;
st,trim-hs-impedance = <1>;
st,tune-squelch-level = <3>;
st,tune-hs-rx-offset = <2>;
st,no-lsfs-sc;
connector {
compatible = "usb-a-connector";
vbus-supply = <&vbus_sw>;
};
};
usbphyc_port1: usb-phy@1 {
reg = <1>;
phy-supply = <&vdd_usb>;
#phy-cells = <1>;
st,tune-hs-dc-level = <2>;
st,enable-fs-rftime-tuning;
st,enable-hs-rftime-reduction;
st,trim-hs-current = <15>;
st,trim-hs-impedance = <1>;
st,tune-squelch-level = <3>;
st,tune-hs-rx-offset = <2>;
st,no-lsfs-sc;
};
};
...
|
