1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,ifc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: FSL/NXP Integrated Flash Controller
maintainers:
- Shawn Guo <shawnguo@kernel.org>
description: |
NXP's integrated flash controller (IFC) is an advanced version of the
enhanced local bus controller which includes similar programming and signal
interfaces with an extended feature set. The IFC provides access to multiple
external memory types, such as NAND flash (SLC and MLC), NOR flash, EPROM,
SRAM and other memories where address and data are shared on a bus.
properties:
$nodename:
pattern: "^memory-controller@[0-9a-f]+$"
compatible:
const: fsl,ifc
"#address-cells":
enum: [2, 3]
description: |
Should be either two or three. The first cell is the chipselect
number, and the remaining cells are the offset into the chipselect.
"#size-cells":
enum: [1, 2]
description: |
Either one or two, depending on how large each chipselect can be.
reg:
maxItems: 1
interrupts:
minItems: 1
maxItems: 2
description: |
IFC may have one or two interrupts. If two interrupt specifiers are
present, the first is the "common" interrupt (CM_EVTER_STAT), and the
second is the NAND interrupt (NAND_EVTER_STAT). If there is only one,
that interrupt reports both types of event.
little-endian:
type: boolean
description: |
If this property is absent, the big-endian mode will be in use as default
for registers.
ranges:
description: |
Each range corresponds to a single chipselect, and covers the entire
access window as configured.
patternProperties:
"^.*@[a-f0-9]+(,[a-f0-9]+)+$":
type: object
description: |
Child device nodes describe the devices connected to IFC such as NOR (e.g.
cfi-flash) and NAND (fsl,ifc-nand). There might be board specific devices
like FPGAs, CPLDs, etc.
required:
- compatible
- reg
required:
- compatible
- reg
- interrupts
additionalProperties: false
examples:
- |
soc {
#address-cells = <2>;
#size-cells = <2>;
memory-controller@ffe1e000 {
compatible = "fsl,ifc";
#address-cells = <2>;
#size-cells = <1>;
reg = <0x0 0xffe1e000 0 0x2000>;
interrupts = <16 2 19 2>;
little-endian;
/* NOR, NAND Flashes and CPLD on board */
ranges = <0x0 0x0 0x0 0xee000000 0x02000000>,
<0x1 0x0 0x0 0xffa00000 0x00010000>,
<0x3 0x0 0x0 0xffb00000 0x00020000>;
flash@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x2000000>;
bank-width = <2>;
device-width = <1>;
partition@0 {
/* 32MB for user data */
reg = <0x0 0x02000000>;
label = "NOR Data";
};
};
};
};
|
