| Age | Commit message (Collapse) | Author |
|---|
|
The following warnings are shown during compilation:
tui.c: In function 'show_cooling_device':
tui.c:216:40: warning: format '%d' expects argument of type 'int', but
argument 7 has type 'long unsigned int' [-Wformat=]
216 | "%02d %12.12s%6d %6d",
| ~~^
| |
| int
| %6ld
......
219 | ptdata.cdi[j].cur_state,
| ~~~~~~~~~~~~~~~~~~~~~~~
| |
| long unsigned int
tui.c:216:44: warning: format '%d' expects argument of type 'int', but
argument 8 has type 'long unsigned int' [-Wformat=]
216 | "%02d %12.12s%6d %6d",
| ~~^
| |
| int
| %6ld
......
220 | ptdata.cdi[j].max_state);
| ~~~~~~~~~~~~~~~~~~~~~~~
| |
| long unsigned int
To fix this, the correct string format must be used for printing.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20231204141335.2798194-1-fe@dev.tdt.de
|
|
In the previous code, the 'mds' and 'nrhandler' variables were not
utilized in the codebase. Additionally, there was a potential NULL
pointer dereference and memory leak due to improper handling of memory
reallocation failure.
This patch removes the unused 'mds' and 'nrhandler' variables along with
the associated code, addressing the unused variable issue, NULL pointer
dereference issue and the memory leak issue.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230926173736.1142420-1-visitorckw@gmail.com
|
|
A build with -D_FORTIFY_SOURCE=2 enabled will produce the following warnings:
sysfs.c:63:30: warning: '%s' directive output may be truncated writing up to 255 bytes into a region of size between 0 and 255 [-Wformat-truncation=]
snprintf(filepath, 256, "%s/%s", path, filename);
^~
Bump up the buffer to PATH_MAX which is the limit and account for all of
the possible NUL and separators that could lead to exceeding the
allocated buffer sizes.
Fixes: 94f69966faf8 ("tools/thermal: Introduce tmon, a tool for thermal subsystem")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Replace 'the the' with 'the' in the comment.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20220722104047.83312-1-slark_xiao@163.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Include sys/time.h and pthread.h in tmon.h, so that types
"pthread_mutex_t" and "struct timeval tv" are known when tmon.h
references them.
Without these headers, compiling tmon against musl-libc will fail with
these errors:
In file included from sysfs.c:31:0:
tmon.h:47:8: error: unknown type name 'pthread_mutex_t'
extern pthread_mutex_t input_lock;
^~~~~~~~~~~~~~~
make[3]: *** [<builtin>: sysfs.o] Error 1
make[3]: *** Waiting for unfinished jobs....
In file included from tui.c:31:0:
tmon.h:54:17: error: field 'tv' has incomplete type
struct timeval tv;
^~
make[3]: *** [<builtin>: tui.o] Error 1
make[2]: *** [Makefile:83: tmon] Error 2
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Acked-by: Alejandro González <alejandro.gonzalez.correo@gmail.com>
Tested-by: Alejandro González <alejandro.gonzalez.correo@gmail.com>
Fixes: 94f69966faf8 ("tools/thermal: Introduce tmon, a tool for thermal subsystem")
Link: https://lore.kernel.org/r/20220718031040.44714-1-f.fainelli@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
Fix the following coccicheck warnings:
./tools/thermal/thermometer/thermometer.c:147:3-4: Unneeded semicolon.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220427030619.81556-2-jiapeng.chong@linux.alibaba.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
This change provides a simple daemon skeleton. It is an example of how
to use the thermal library which wraps all the complex code related to
the netlink and transforms it into a callback oriented code.
The goal of this skeleton is to give a base brick for anyone
interested in writing its own thermal engine or as an example to rely
on to write its own thermal monitoring implementation.
In the future, it will evolve with more features and hopefully more
logic.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220420160933.347088-5-daniel.lezcano@linaro.org
|
|
The 'thermometer' tool allows to capture the temperature of a set of
thermal zones defined in a configuration file at a specified rate.
It is designed to have the lowest possible overhead. It will write the
captured temperature per thermal zone per file so making easier to
write a gnuplot script.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220420160933.347088-4-daniel.lezcano@linaro.org
|
|
The next changes will provide a couple of tools using some common
functions provided by this library.
It provides basic wrappers for:
- mainloop
- logging
- timestamp
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220420160933.347088-3-daniel.lezcano@linaro.org
|
|
Fix the following coccicheck review:
/tools/thermal/tmon/pid.c:57:5-8: Unneeded variable
Remove unneeded variable used to store return value.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ran jianping <ran.jianping@zte.com.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Default to prefixed pkg-config when crosscompiling, this matches what
other parts of the tools/ directory already do.
[dlezcano] : Reworked description
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/31302992.qZodDJZGDc@devpool47
|
|
- Remove empty macros assignments
- Use directory creation parameter for the install tool
- Use $OBJ instead of building the list of object for the 'clean' target
[dlezcano] : Changed title and description
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1951386.ZPQrlMDjM2@devpool47
|
|
Since commit 57fd251c7896 ("kbuild: split cc-option and friends to
scripts/Makefile.compiler"), some kselftests fail to build.
The tools/ directory opted out Kbuild, and went in a different
direction. People copied scripts and Makefiles to the tools/ directory
to create their own build system.
tools/build/Build.include mimics scripts/Kbuild.include, but some
tool Makefiles include the Kbuild one to import a feature that is
missing in tools/build/Build.include:
- Commit ec04aa3ae87b ("tools/thermal: tmon: use "-fstack-protector"
only if supported") included scripts/Kbuild.include from
tools/thermal/tmon/Makefile to import the cc-option macro.
- Commit c2390f16fc5b ("selftests: kvm: fix for compilers that do
not support -no-pie") included scripts/Kbuild.include from
tools/testing/selftests/kvm/Makefile to import the try-run macro.
- Commit 9cae4ace80ef ("selftests/bpf: do not ignore clang
failures") included scripts/Kbuild.include from
tools/testing/selftests/bpf/Makefile to import the .DELETE_ON_ERROR
target.
- Commit 0695f8bca93e ("selftests/powerpc: Handle Makefile for
unrecognized option") included scripts/Kbuild.include from
tools/testing/selftests/powerpc/pmu/ebb/Makefile to import the
try-run macro.
Copy what they need into tools/build/Build.include, and make them
include it instead of scripts/Kbuild.include.
Link: https://lore.kernel.org/lkml/86dadf33-70f7-a5ac-cb8c-64966d2f45a1@linux.ibm.com/
Fixes: 57fd251c7896 ("kbuild: split cc-option and friends to scripts/Makefile.compiler")
Reported-by: Janosch Frank <frankja@linux.ibm.com>
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Yonghong Song <yhs@fb.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Convert tsens configuration DT binding to yaml (Rajeshwari)
- Add interrupt support on the rcar sensor (Niklas Söderlund)
- Add a new Spreadtrum thermal driver (Baolin Wang)
- Add thermal binding for the fsl scu board, a new API to retrieve the
sensor id bound to the thermal zone and i.MX system controller sensor
(Anson Huang))
- Remove warning log when a deferred probe is requested on Exynos
(Marek Szyprowski)
- Add the thermal monitoring unit support for imx8mm with its DT
bindings (Anson Huang)
- Rephrase the Kconfig text for clarity (Linus Walleij)
- Use the gpio descriptor for the ti-soc-thermal (Linus Walleij)
- Align msg structure to 4 bytes for i.MX SC, fix the Kconfig
dependency, add the __may_be unused annotation for PM functions and
the COMPILE_TEST option for imx8mm (Anson Huang)
- Fix a dependency on regmap in Kconfig for qoriq (Yuantian Tang)
- Add DT binding and support for the rcar gen3 r8a77961 and improve the
error path on the rcar init function (Niklas Söderlund)
- Cleanup and improvements for the tsens Qcom sensor (Amit Kucheria)
- Improve code by removing lock and caching values in the rcar thermal
sensor (Niklas Söderlund)
- Cleanup in the qoriq drivers and add a call to
imx_thermal_unregister_legacy_cooling in the removal function (Anson
Huang)
- Remove redundant 'maxItems' in tsens and sprd DT bindings (Rob
Herring)
- Change the thermal DT bindings by making the cooling-maps optional
(Yuantian Tang)
- Add Tiger Lake support (Sumeet Pawnikar)
- Use scnprintf() for avoiding potential buffer overflow (Takashi Iwai)
- Make pkg_temp_lock a raw_spinlock_t(Clark Williams)
- Fix incorrect data types by changing them to signed on i.MX SC (Anson
Huang)
- Replace zero-length array with flexible-array member (Gustavo A. R.
Silva)
- Add support for i.MX8MP in the driver and in the DT bindings (Anson
Huang)
- Fix return value of the cpufreq_set_cur_state() function (Willy
Wolff)
- Remove abusing and scary WARN_ON in the cpufreq cooling device
(Daniel Lezcano)
- Fix build warning of incorrect argument type reported by sparse on
imx8mm (Anson Huang)
- Fix stub for the devfreq cooling device (Martin Blumenstingl)
- Fix cpu idle cooling documentation (Sergey Vidishev)
* tag 'thermal-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (52 commits)
Documentation: cpu-idle-cooling: Fix diagram for 33% duty cycle
thermal: devfreq_cooling: inline all stubs for CONFIG_DEVFREQ_THERMAL=n
thermal: imx8mm: Fix build warning of incorrect argument type
thermal/drivers/cpufreq_cooling: Remove abusing WARN_ON
thermal/drivers/cpufreq_cooling: Fix return of cpufreq_set_cur_state
thermal: imx8mm: Add i.MX8MP support
dt-bindings: thermal: imx8mm-thermal: Add support for i.MX8MP
thermal: qcom: tsens.h: Replace zero-length array with flexible-array member
thermal: imx_sc_thermal: Fix incorrect data type
thermal: int340x_thermal: Use scnprintf() for avoiding potential buffer overflow
thermal: int340x: processor_thermal: Add Tiger Lake support
thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t
dt-bindings: thermal: make cooling-maps property optional
dt-bindings: thermal: qcom-tsens: Remove redundant 'maxItems'
dt-bindings: thermal: sprd: Remove redundant 'maxItems'
thermal: imx: Calling imx_thermal_unregister_legacy_cooling() in .remove
thermal: qoriq: Sort includes alphabetically
thermal: qoriq: Use devm_add_action_or_reset() to handle all cleanups
thermal: rcar_thermal: Remove lock in rcar_thermal_get_current_temp()
thermal: rcar_thermal: Do not store ctemp in rcar_thermal_priv
...
|
|
Add SPDX License Identifier to all .gitignore files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Added new PCI id for Tiger Lake processor thermal device along with
MMIO RAPL support.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1583489952-29612-1-git-send-email-sumeet.r.pawnikar@intel.com
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 or
later as published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 6 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520075211.856638608@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Using -O3 instead of -O1 if it's supported by compiler.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Markus Mayer <mmayer@broadcom.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: http://lkml.kernel.org/r/20190103161350.11446-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
So that the user can provide, e.g. distro package alternative values.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Herton Krzesinski <herton@redhat.com>
Cc: Markus Mayer <mmayer@broadcom.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: http://lkml.kernel.org/r/20181212102537.25902-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Fixes a segfault occurring when e.g. <TAB> is pressed multiple times in the
ncurses tmon application. The segfault is caused by incrementing
cur_thermal_record in the main function without checking if it's value reached
NR_THERMAL_RECORD immediately. Since the boundary check only occurred in
update_thermal_data a race condition existed, which lead to an attempted read
beyond the last element of the trec array.
The fix was implemented by moving the cur_thermal_record incrementation to the
update_thermal_data function using a temporary variable on which the boundary
condition is checked before updating cur_thread_record, so that the variable is
never incremented beyond the trec array's boundary.
It seems the segfault does not occur on every machine: On a HP EliteBook G4 the
segfault happens, while it does not happen on a Thinkpad T540p.
Signed-off-by: Frank Asseg <frank.asseg@objecthunter.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management updates from Zhang Rui:
- introduce brcmstb AVS TMON thermal driver (Brian Norris)
- add Rockchip RV1108 support in rockchip thermal driver (Rocky Hao)
- major rework on HISI driver plus additional support of hisi3660
(Daniel Lezcano)
- add nvmem-cells binding on imx6sx (Leonard Crestez)
- fix a NULL pointer dereference on ti thermal driver unloading (Tony
Lindgren)
- improve tmon tool to make it easier to cross-compile tmon (Markus
Mayer)
- add Coffee Lake and Cannon Lake support for intel processor and pch
thermal drivers (Srinivas Pandruvada)
- other small fixes and cleanups (Arvind Yadav, Colin Ian King, Allen
Wild, Nicolin Chen, Baruch SiachNiklas Söderlund, Arnd Bergmann)
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (44 commits)
thermal: pch: Add Cannon Lake support
thermal: int340x: processor_thermal: Add Coffee Lake support
thermal: int340x: processor_thermal: Add Cannon Lake support
thermal: bxt: remove redundant variable trip
thermal: cpu_cooling: pr_err() strings should end with newlines
thermal: add brcmstb AVS TMON driver
Documentation: devicetree: add binding for Broadcom STB AVS TMON
thermal/drivers/hisi: Add support for hi3660 SoC
thermal/drivers/hisi: Prepare to add support for other hisi platforms
thermal/drivers/hisi: Add platform prefix to function name
thermal/drivers/hisi: Put platform code together
thermal/drivers/qcom-spmi: Use devm_iio_channel_get
thermal/drivers/generic-iio-adc: Switch tz request to devm version
thermal/drivers/step_wise: Fix temperature regulation misbehavior
thermal/drivers/hisi: Use round up step value
thermal/drivers/hisi: Move the clk setup in the corresponding functions
thermal/drivers/hisi: Remove mutex_lock in the code
thermal/drivers/hisi: Remove thermal data back pointer
thermal/drivers/hisi: Convert long to int
thermal/drivers/hisi: Rename and remove unused field
...
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
To ease cross-compiling, make use of the $(PKG_CONFIG) variable rather
than hard-coding calls to pkg-config.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
It can be helpful, especially when using a build system, to set the C
compiler externally.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Most, but not all, toolchains support the "-fstack-protector" flag. We
check if the compiler supports the flag before using it. This allows
tmon to be compiled for more environments.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
The header <panel.h> might be in /usr/include/ncursesw, which is not
part of the standard include path. This fixes compile on openSUSE.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
To install tmon we issue "make install" which produces bellow error.
root@odroidxu3:/usr/src/odroidxu3-4.y-testing/tools/thermal/tmon# make install
mkdir -p /usr/bin
install -m 755 -p "tmon" "/usr/bin/tmon"
mkdir -p /
install -m 644 -p "" "/"
install: cannot stat ‘’: No such file or directory
make: [install] Error 1 (ignored)
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
gcc complains about the 'cols' variable being unused. This is
unavoidable, given the ncurses getmaxyx() macro-based API, which wants
to assign to a variable directly, even when we're not going to use it.
Warning:
gcc -O1 -Wall -Wshadow -W -Wformat -Wimplicit-function-declaration -Wimplicit-int -fstack-protector -D VERSION=\"1.0\" -c -o tui.o tui.c
tui.c: In function ‘show_dialogue’:
tui.c:288:12: warning: variable ‘cols’ set but not used [-Wunused-but-set-variable]
int rows, cols;
^
So, add a hack to get rid of that warning.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Some distros (e.g., Arch Linux) don't package the tinfo library
separately from ncurses, so don't unconditionally include it. Instead,
use pkg-config.
The $(STATIC) ugliness is to handle the reported build case from commit
6b533269fb25 ("tools/thermal: tmon: fix compilation errors when building
statically"), where a developer wants to be able to build with:
make LDFLAGS=-static
which requires an additional pkg-config flag.
Finally, support a lowest common denominator fallback (-lpanel
-lncurses) for build systems that don't have pkg-config entries for
ncurses.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
We might want to prepare CFLAGS outside of this Makefile, so don't
overwrite its initial value.
Then, support $(CROSS_COMPILE), so we can use a cross-compile toolchain.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
The number of rows in the dialog vary according to the number of cooling
devices. However, some of the windowing computations were assuming a
fixed number of rows. This computation is OK when we have between 4 and
9 cooling devices (and they wrap to the next column), but with fewer
devices, we end up printing off the end of the window.
This unifies the row computation into a single function and uses that
throughout the TUI code. This also accounts for increasing the number of
rows when there are more than 9 total cooling devices.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
We can use the ncurses API to get the number of rows.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
If we launch in daemon mode (--daemon), we don't have the ncurses UI,
but we might want to set the target temperature still. For example,
someone might stick the following in their boot script:
tmon --control intel_powerclamp --target-temp 90 --log --daemon
This would turn on CPU idle injection when we're around 90 degrees
celsius, and would log temperature and throttling info to
/var/tmp/tmon.log.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
The calloc() and xcalloc() functions takes @nmemb first and then @size. Fix all w/
pattern "calloc\s*(\s*sizeof".
Signed-off-by: Arjun Sreedharan <arjun024@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1417866043-1877-1-git-send-email-arjun024@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently, the tmon umask value is set to 0, which means whatever the permission
mask in the shell are when starting tmon in daemon mode are what the permissions
of any created files will be. We should likely set something more explicit, so
lets go with the usual 022
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
The tmon logging system blindly opens its log file on a static path, making it
very easy for someone to redirect that log information to inappropriate places
or overwrite other users data. Do some easy checking to make sure we're not
logging to a symlink or a file owned by another user.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
|
tmon fails to build statically with the following error:
$ make LDFLAGS=-static
gcc -O1 -Wall -Wshadow -W -Wformat -Wimplicit-function-declaration -Wimplicit-int -fstack-protector -D VERSION=\"1.0\" -static tmon.o tui.o sysfs.o pid.o -o tmon -lm -lpanel -lncursesw -lpthread
tmon.o: In function `tmon_sig_handler':
tmon.c:(.text+0x21): undefined reference to `stdscr'
tmon.o: In function `tmon_cleanup':
tmon.c:(.text+0xb9): undefined reference to `stdscr'
tmon.c:(.text+0x11e): undefined reference to `stdscr'
tmon.c:(.text+0x123): undefined reference to `keypad'
tmon.c:(.text+0x12d): undefined reference to `nocbreak'
tmon.o: In function `main':
tmon.c:(.text+0x785): undefined reference to `stdscr'
tmon.c:(.text+0x78a): undefined reference to `nodelay'
tui.o: In function `setup_windows':
tui.c:(.text+0x131): undefined reference to `stdscr'
tui.c:(.text+0x176): undefined reference to `stdscr'
tui.c:(.text+0x19f): undefined reference to `stdscr'
tui.c:(.text+0x1cc): undefined reference to `stdscr'
tui.c:(.text+0x1ff): undefined reference to `stdscr'
tui.o:tui.c:(.text+0x229): more undefined references to `stdscr' follow
tui.o: In function `show_cooling_device':
[...]
stdscr() and friends are in libtinfo (part of ncurses) so add it to
the libraries that are linked in when compiling tmon to fix it.
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Javi Merino <javi.merino@arm.com>
Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
|
|
Increasingly, Linux is running on thermally constrained devices. The simple
thermal relationship between processor and fan has become past for modern
computers.
As hardware vendors cope with the thermal constraints on their products,
more sensors are added, new cooling capabilities are introduced. The
complexity of the thermal relationship can grow exponentially among cooling
devices, zones, sensors, and trip points. They can also change dynamically.
To expose such relationship to the userspace, Linux generic thermal layer
introduced sysfs entry at /sys/class/thermal with a matrix of symbolic
links, trip point bindings, and device instances. To traverse such
matrix by hand is not a trivial task. Testing is also difficult in that
thermal conditions are often exception cases that hard to reach in
normal operations.
TMON is conceived as a tool to help visualize, tune, and test the
complex thermal subsystem.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
|
