| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Remove obsolete comment about zstd, since approach changed during
development of commit bbc3a46065d08f9ab3412b1f26bbfa778c444833
Signed-off-by: Richard Davies <richard@arachsys.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
zstd apparently lies about the size of the compression workspace it
requires; if we double it compression succeeds.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds a new btree, rebalance_work, to eliminate scanning required
for finding extents that need work done on them in the background - i.e.
for the background_target and background_compression options.
rebalance_work is a bitset btree, where a KEY_TYPE_set corresponds to an
extent in the extents or reflink btree at the same pos.
A new extent field is added, bch_extent_rebalance, which indicates that
this extent has work that needs to be done in the background - and which
options to use. This allows per-inode options to be propagated to
indirect extents - at least in some circumstances. In this patch,
changing IO options on a file will not propagate the new options to
indirect extents pointed to by that file.
Updating (setting/clearing) the rebalance_work btree is done by the
extent trigger, which looks at the bch_extent_rebalance field.
Scanning is still requrired after changing IO path options - either just
for a given inode, or for the whole filesystem. We indicate that
scanning is required by adding a KEY_TYPE_cookie key to the
rebalance_work btree: the cookie counter is so that we can detect that
scanning is still required when an option has been flipped mid-way
through an existing scan.
Future possible work:
- Propagate options to indirect extents when being changed
- Add other IO path options - nr_replicas, ec, to rebalance_work so
they can be applied in the background when they change
- Add a counter, for bcachefs fs usage output, showing the pending
amount of rebalance work: we'll probably want to do this after the
disk space accounting rewrite (moving it to a new btree)
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Since compression options now include compression level, proper
validation is a bit more involved.
This adds bch2_compression_opt_valid(), and plumbs it around
appropriately.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
More reorganization, this splits up io.c into
- io_read.c
- io_misc.c - fallocate, fpunch, truncate
- io_write.c
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We commonly use no_data_io mode when debugging filesystem metadata
dumps, where data checksum/compression errors are expected and
unimportant - this patch suppresses these.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This allows including a compression level when specifying a compression
type, e.g.
compression=zstd:15
Values from 1 through 15 indicate compression levels, 0 or unspecified
indicates the default.
For LZ4, values 3-15 specify that the HC algorithm should be used.
Note that for compatibility, extents themselves only include the
compression type, not the compression level. This means that specifying
the same compression algorithm but different compression levels for the
compression and background_compression options will have no effect.
XXX: perhaps we could add a warning for this
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Now that we have distinct error codes for different memory allocation
failures, the early init log messages are no longer needed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
GFP_NOIO dates from the bcache days, when we operated under the block
layer. Now, GFP_NOFS is more appropriate, so switch all GFP_NOIO uses to
GFP_NOFS.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds private error codes for most (but not all) of our ENOMEM uses,
which makes it easier to track down assorted allocation failures.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
A single block can't be compressed, so it's incompressible.
This stops rebalance repeatably marking extents as uncompressed.
Signed-off-by: Daniel Hill <daniel@gluo.nz>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
It'll now be handled at format time and in sysfs like other options - it
still can only be set at format time, though.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
This adds flags for options that must be a power of two (block size and
btree node size), and options that are stored in the superblock as a
power of two (encoded extent max).
Also: options are now stored in memory in the same units they're
displayed in (bytes): we now convert when getting and setting from the
superblock.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
|
|
The zstd compression code seems to have a bug where it will write just
past the end of the destination buffer - probably only when the
compressed output isn't going to fit in the destination buffer, which
will never happen if you're always allocating a bigger buffer than the
source buffer which would explain other users not hitting it. But, we
size the buffer according to how much contiguous space on disk we have,
so...
generally, bugs like this don't write more than a word past the end of
the buffer, so an easy workaround is to subtract a fudge factor from the
buffer size.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes a lockdep splat where we're allocating memory with vmalloc in
the compression bounce path, which doesn't always obey GFP_NOFS.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
vmalloc() and vmap() don't take GFP_NOFS - this should be pushed further
up the IO path, but for now just doing the simple fix.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When they were converted to kvpmalloc pools they weren't converted to
pass the actual size of the allocation. Oops.
Also, validate the real length in the zstd decompression path.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
In __bio_map_or_bounce(), the check for if the bio is physically
contiguous is improved; it's now more readable and handles multi page
but contiguous bios.
Also when decompressing, we were doing a redundant memcpy in the case
where we were able to use vmap to map a bio contigiously.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes an issue where mounting would fail because of memory
fragmentation - previously the compression bounce buffers were using
get_free_pages().
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes the background_compression option: wihout some way of marking
data as incompressible, rebalance will keep rewriting incompressible
data over and over.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Helps for preventing things from getting out of sync.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bio_uncompress_inplace() used to potentially need to extend the bio to
be big enough for the uncompressed data, which has become problematic
with multipage bvecs - but, the move extent path actually already
allocated the bios to be big enough for the uncompressed data.
The promote path needed to be fixed, though.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
With multipage bvecs it's not needed anymore
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Switch to always using bio_add_page(), which merges contiguous pages now
that we have multipage bvecs.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Initially forked from drivers/md/bcache, bcachefs is a new copy-on-write
filesystem with every feature you could possibly want.
Website: https://bcachefs.org
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
