| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2024-07-15 | thermal/drivers/generic-adc: Simplify with dev_err_probe() | Krzysztof Kozlowski | |
| Error handling in probe() can be a bit simpler with dev_err_probe(). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-12-241644e2b6e0@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> | |||
| 2024-07-15 | thermal/drivers/generic-adc: Simplify probe() with local dev variable | Krzysztof Kozlowski | |
| Simplify the probe() function by using local 'dev' instead of &pdev->dev. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240709-thermal-probe-v1-11-241644e2b6e0@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> | |||
| 2023-08-16 | thermal/drivers/generic-adc: Removed unneeded call to platform_set_drvdata() | Andrei Coardos | |
| This function call was found to be unnecessary as there is no equivalent platform_get_drvdata() call to access the private data of the driver. Also, the private data is defined in this driver, so there is no risk of it being accessed outside of this driver file. Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com> Reviewed-by: Alexandru Ardelean <alex@shruggie.ro> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230814180921.3336-1-aboutphysycs@gmail.com | |||
| 2023-06-26 | thermal/drivers/generic-adc: Register thermal zones as hwmon sensors | Chen-Yu Tsai | |
| Register thermal zones as hwmon sensors to let userspace read temperatures using standard hwmon interface. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> [Yangtao: only keep devm_thermal_add_hwmon_sysfs] Signed-off-by: Yangtao Li <frank.li@vivo.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230620090732.50025-11-frank.li@vivo.com | |||
| 2023-03-03 | thermal: Remove debug or error messages in get_temp() ops | Daniel Lezcano | |
| Some get_temp() ops implementation are showing an error or a debug message if the reading of the sensor fails. The debug message is already displayed from the call site of this ops. So we can remove it. On the other side, the error should not be displayed because in production that can raise tons of messages. Finally, some drivers are showing a debug message with the temperature, this is also accessible through the trace from the core code in the temperature_update() function. Another benefit is the dev_* messages are accessing the thermal zone device field from the structure, so we encapsulate even more the code by preventing these accesses. Remove those messages. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> #Armada Acked-by: Florian Fainelli <f.fainelli@gmail.com> #brcmstb_thermal.c Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | |||
| 2023-03-03 | thermal/core: Use the thermal zone 'devdata' accessor in thermal located drivers | Daniel Lezcano | |
| The thermal zone device structure is exposed to the different drivers and obviously they access the internals while that should be restricted to the core thermal code. In order to self-encapsulate the thermal core code, we need to prevent the drivers accessing directly the thermal zone structure and provide accessor functions to deal with. Use the devdata accessor introduced in the previous patch. No functional changes intended. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> #R-Car Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #MediaTek auxadc and lvts Reviewed-by: Balsam CHIHI <bchihi@baylibre.com> #Mediatek lvts Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com> #da9062 Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> #spread Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> #sun8i_thermal Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #Broadcom Reviewed-by: Dhruva Gole <d-gole@ti.com> # K3 bandgap Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> #uniphier Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | |||
| 2022-08-17 | thermal/drivers/generic-adc: Switch to new of API | Daniel Lezcano | |
| The thermal OF code has a new API allowing to migrate the OF initialization to a simpler approach. The ops are no longer device tree specific and are the generic ones provided by the core code. Convert the ops to the thermal_zone_device_ops format and use the new API to register the thermal zone with these generic ops. Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org> Link: https://lore.kernel.org/r/20220804224349.1926752-6-daniel.lezcano@linexp.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> | |||
| 2020-01-27 | thermal: generic-adc: silence info message for IIO_TEMP channels | Martin Blumenstingl | |
| Since commit d36e2fa0253875 ("thermal: generic-adc: make lookup table optional") "generic-adc-thermal" can be used with an IIO_TEMP channel. In this case the following message is logged at probe time: no lookup table, assuming DAC channel returns milliCelcius Silence this info message if the channel type is known to be in milli celsius. Keep this message when the channel type is unknown or not of type temperature. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200107232044.889075-3-martin.blumenstingl@googlemail.com | |||
| 2020-01-27 | thermal: generic-adc: silence "no lookup table" on deferred probe | Martin Blumenstingl | |
| A "generic-adc-thermal" without "temperature-lookup-table" is perfectly valid since commit d36e2fa0253875 ("thermal: generic-adc: make lookup table optional"). On deferred probe the message "no lookup table, assuming DAC channel returns milliCelcius" is still logged. Prevent this message on deferred probe of the IIO channel by first looking up the IIO channel. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200107232044.889075-2-martin.blumenstingl@googlemail.com | |||
| 2019-11-07 | thermal-generic-adc: Silent error message for EPROBE_DEFER | Hsin-Yi Wang | |
| If devm_iio_channel_get() or devm_thermal_zone_of_sensor_register() fail with EPROBE_DEFER, we shouldn't print an error message, as the device will be probed again later. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20190910075907.132200-1-hsinyi@chromium.org | |||
| 2019-06-19 | treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 | Thomas Gleixner | |
| Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | |||
| 2019-05-14 | thermal: generic-adc: make lookup table optional | Jean-Francois Dagenais | |
| Certain ADC channels, such as the xilinx-ams temperature channels, give milliCelcius already when read with iio_read_channel_processed. Rather than having to provide a 1:1 dummy lookup table, simply allow to bypass the mechanism. Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> | |||
| 2019-01-02 | thermal: generic-adc: Fix adc to temp interpolation | Bjorn Andersson | |
| First correct the edge case to return the last element if we're outside the range, rather than at the last element, so that interpolation is not omitted for points between the two last entries in the table. Then correct the formula to perform linear interpolation based the two points surrounding the read ADC value. The indices for temp are kept as "hi" and "lo" to pair with the adc indices, but there's no requirement that the temperature is provided in descendent order. mult_frac() is used to prevent issues with overflowing the int. Cc: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> | |||
| 2018-06-12 | treewide: devm_kzalloc() -> devm_kcalloc() | Kees Cook | |
| The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org> | |||
| 2017-10-31 | thermal/drivers/generic-iio-adc: Switch tz request to devm version | Daniel Lezcano | |
| Everything mentionned here: https://lkml.org/lkml/2016/4/20/850 This driver was added before the devm_iio_channel_get() function version was merged. The sensor should be released before the iio channel, thus we had to use the non-devm version of thermal_zone_of_sensor_register(). Now the devm_iio_channel_get() is available, do the corresponding change in this driver and remove gadc_thermal_remove(). [Compiled tested only] Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> | |||
| 2016-05-17 | thermal: generic-adc: Add ADC based thermal sensor driver | Laxman Dewangan | |
| In some of platform, thermal sensors like NCT thermistors are connected to the one of ADC channel. The temperature is read by reading the voltage across the sensor resistance via ADC. Lookup table for ADC read value to temperature is referred to get temperature. ADC is read via IIO framework. Add support for thermal sensor driver which read the voltage across sensor resistance from ADC through IIO framework. Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> | |||
 |
index : linux.git | |
| dakr's fork of kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git |
| summaryrefslogtreecommitdiff |