| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The updates to the mediatek, allwinner, ti, tegra, microchip, stm32,
samsung, imx, zynq and amlogic platoforms are fairly small maintenance
changes, either addressing minor mistakes or enabling additional
hardware.
The qualcomm platform changes add a number of features and are larger
than the other ones combined, introducing the use of linux/cleanup.h
across several drivers, adding support for Snapdragon X1E and other
SoCs in platform drivers, a new "protection domain mapper" driver, and
a "shared memory bridge" driver.
The cznic "turris omnia" router based on Marvell Armada gets a
platform driver that talks to the board specific microcontroller.
The reset and cache subsystems get a few minor updates to SoC specific
drivers, while the ff-a, scmi and optee firmware drivers get some code
refactoring and new features"
* tag 'soc-drivers-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (122 commits)
firmware: turris-mox-rwtm: Initialize completion before mailbox
firmware: turris-mox-rwtm: Fix checking return value of wait_for_completion_timeout()
firmware: turris-mox-rwtm: Do not complete if there are no waiters
MAINTAINERS: drop riscv list from cache controllers
platform: cznic: turris-omnia-mcu: fix Kconfig dependencies
bus: sunxi-rsb: Constify struct regmap_bus
soc: sunxi: sram: Constify struct regmap_config
platform: cznic: turris-omnia-mcu: Depend on WATCHDOG
platform: cznic: turris-omnia-mcu: Depend on OF
soc: samsung: exynos-pmu: add support for PMU_ALIVE non atomic registers
arm64: stm32: enable scmi regulator for stm32
firmware: qcom: tzmem: blacklist more platforms for SHM Bridge
soc: qcom: wcnss: simplify with cleanup.h
soc: qcom: pdr: simplify with cleanup.h
soc: qcom: ocmem: simplify with cleanup.h
soc: qcom: mdt_loader: simplify with cleanup.h
soc: qcom: llcc: simplify with cleanup.h
firmware: qcom: tzmem: simplify returning pointer without cleanup
soc: qcom: socinfo: Add PM6350 PMIC
arm64: dts: renesas: rz-smarc: Replace fixed regulator for USB VBUS
...
|
|
As per RZ/G2L HW manual, VBUS enable can be controlled by the VBOUT bit
of the VBUS Control Register(VBENCTL) register in the USBPHY Control.
Expose this register as regmap and instantiate the USB VBUS regulator
device, so that consumer can control the vbus using regulator API's
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20240702180032.207275-3-biju.das.jz@bp.renesas.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The Tegra BPMP reset driver can be compiled without TEGRA_BPMP being
enabled. Allow it to be built under COMPILE_TEST.
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20240625-reset-compile-bpmp-v1-1-647e846303d8@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The i.MX8MP AudioMix reset controller is only present on Freescale i.MX8
SoCs. Hence add a dependency on ARCH_MXC, to prevent asking the user
about this driver when configuring a kernel without i.MX SoC support.
Fixes: fe125601d17cc1ea ("reset: imx8mp-audiomix: Add AudioMix Block Control reset driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/6d8116a56186fbf468229e823c7c8dfcd9488959.1719316665.git.geert+renesas@glider.be
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The ZynqMP reset driver can be compiled without ARCH_ZYNQMP being
enabled. Allow it to be built under COMPILE_TEST.
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20240621-reset-compile-zynqmp-v1-1-ede43ab18101@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Add support for the resets on i.MX8MP Audio Block Control module,
which includes the EARC PHY software reset and EARC controller
software reset. The reset controller is created using the auxiliary
device framework and set up in the clock driver.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/1719200345-32006-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Use devm_clk_get_enabled() to reduce a bit of boilerplate and to
disable the clock in case devm_reset_controller_register() fails.
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240621-reset-devm-clk-get-enabled-v1-1-8408c7962b6c@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The STIH407 reset driver can be compiled without ARCH_STI being
enabled. Allow it to be built under COMPILE_TEST.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20240621-reset-compile-sti-v1-1-b7a66ce29911@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
As soon as the reset controller is registered, it could be used by a
reset consumer. That means hardware setup to be done first and then the
registration of the reset controller. So move the registration of reset
controller at the end of probe().
While at it, fix the issue that the reset is not re-asserted in case
devm_reset_controller_register() fails and also use goto statements to
simplify the error path in probe().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240610164845.89666-1-biju.das.jz@bp.renesas.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/reset/hisilicon/hi6220_reset.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240607-md-drivers-reset-v1-1-5d317ff8e3bd@quicinc.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The GPIO reset controller uses gpiolib but there is no Kconfig
dependency reflecting this fact, add one.
With the addition of the controller to the arm64 defconfig this is
causing build breaks for arm64 virtconfig in -next:
aarch64-linux-gnu-ld: drivers/reset/core.o: in function `__reset_add_reset_gpio_lookup':
/build/stage/linux/drivers/reset/core.c:861:(.text+0xccc): undefined reference to `gpio_device_find_by_fwnode'
Fixes: cee544a40e44 ("reset: gpio: Add GPIO-based reset controller")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240325-reset-gpiolib-deps-v2-1-3ed2517f5f53@kernel.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"I'm actually surprised this time. There aren't any new Qualcomm SoC
clk drivers. And there's zero diff in the core clk framework.
Instead we have new clk drivers for STM and Sophgo, with
Samsung^WGoogle in third for the diffstat because they introduced HSI0
and HSI2 clk drivers for Google's GS101 SoC (high speed interface
things like PCIe, UFS, and MMC).
Beyond those big diffs there's the usual updates to various clk
drivers for incorrect parent descriptions or mising
MODULE_DEVICE_TABLE()s, etc. Nothing in particular stands out as super
interesting here.
New Drivers:
- STM32MP257 SoC clk driver
- Airoha EN7581 SoC clk driver
- Sophgo CV1800B, CV1812H and SG2000 SoC clk driver
- Loongson-2k0500 and Loongson-2k2000 SoC clk driver
- Add HSI0 and HSI2 clock controllers for Google GS101
- Add i.MX95 BLK CTL clock driver
Updates:
- Allocate clk_ops dynamically for SCMI clk driver
- Add support in qcom RCG and RCG2 for multiple configurations for
the same frequency
- Use above support for IPQ8074 NSS port 5 and 6 clocks to resolve
issues
- Fix the Qualcomm APSS IPQ5018 PLL to fix boot failures of some
boards
- Cleanups and fixes for Qualcomm Stromer PLLs
- Reduce max CPU frequency on Qualcomm APSS IPQ5018
- Fix Kconfig dependencies of Qualcomm SM8650 GPU and SC8280XP camera
clk drivers
- Make Qualcomm MSM8998 Venus clocks functional
- Cleanup downstream remnants related to DisplayPort across Qualcomm
SM8450, SM6350, SM8550, and SM8650
- Reuse the Huayra APSS register map on Qualcomm MSM8996 CBF PLL
- Use a specific Qualcomm QCS404 compatible for the otherwise generic
HFPLL
- Remove Qualcomm SM8150 CPUSS AHB clk as it is unused
- Remove an unused field in the Qualcomm RPM clk driver
- Add missing MODULE_DEVICE_TABLE to Qualcomm MSM8917 and MSM8953
global clock controller drivers
- Allow choice of manual or firmware-driven control over PLLs, needed
to fully implement CPU clock controllers on Exynos850
- Correct PLL clock IDs on ExynosAutov9
- Propagate certain clock rates to allow setting proper SPI clock
rates on Google GS101
- Mark certain Google GS101 clocks critical
- Convert old S3C64xx clock controller bindings to DT schema
- Add new PLL rate and missing mux on Rockchip rk3568
- Add missing reset line on Rockchip rk3588
- Removal of an unused field in struct rockchip_mmc_clock
- Amlogic s4/a1: add regmap maximum register for proper debugfs dump
- Amlogic s4: add MODULE_DEVICE_TABLE() on pll and periph controllers
- Amlogic pll driver: print clock name on lock error to help debug
- Amlogic vclk: finish dsi clock path support
- Amlogic license: fix occurence "GPL v2" as reported by checkpatch
- Add PM runtime support to i.MX8MP Audiomix
- Add DT schema for i.MX95 Display Master Block Control
- Convert to platform remove callback returning void for i.MX8MP
Audiomix
- Add SPI (MSIOF) and external interrupt (INTC-EX) clocks on Renesas
R-Car V4M
- Add interrupt controller (PLIC) clock and reset on Renesas RZ/Five
- Prepare power domain support for Renesas RZ/G2L family members, and
add actual support on Renesas RZ/G3S SoC
- Add thermal, serial (SCIF), and timer (CMT/TMU) clocks on Renesas
R-Car V4M
- Add additional constraints to Allwinner A64 PLL MIPI clock
- Fix autoloading sunxi-ng clocks when build as a module"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (118 commits)
clk: samsung: Don't register clkdev lookup for the fixed rate clocks
clk, reset: microchip: mpfs: fix incorrect preprocessor conditions
clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLs
clk: qcom: apss-ipq-pll: fix PLL rate for IPQ5018
clk: qcom: Fix SM_GPUCC_8650 dependencies
clk: qcom: Fix SC_CAMCC_8280XP dependencies
dt-bindings: clocks: stm32mp25: add access-controllers description
clock, reset: microchip: move all mpfs reset code to the reset subsystem
clk: samsung: gs101: drop unused HSI2 clock parent data
clk: rockchip: rk3568: Add PLL rate for 724 MHz
clk: rockchip: Remove an unused field in struct rockchip_mmc_clock
dt-bindings: clock: fixed: Define a preferred node name
clk: meson: s4: fix module autoloading
clk: samsung: gs101: mark some apm UASC and XIU clocks critical
clk: imx: imx8mp: Convert to platform remove callback returning void
clk: imx: imx8mp: Switch to RUNTIME_PM_OPS()
clk: bcm: rpi: Assign ->num before accessing ->hws
clk: bcm: dvp: Assign ->num before accessing ->hws
clk: samsung: gs101: add support for cmu_hsi2
clk: samsung: gs101: add support for cmu_hsi0
...
|
|
Stephen and Philipp, while reviewing patches, said that all of the aux
device creation and the register read/write code could be moved to the
reset subsystem, leaving the clock driver with no implementations of
reset_* functions at all. Move them.
Suggested-by: Philipp Zabel <p.zabel@pengutronix.de>
Suggested-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240424-strangle-sharpener-34755c5e6e3e@spud
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Since SOC_FOO should be deprecated from patch [1], and cleanup for other
SoCs is already in the mailing list [2,3,4,5], we remove the use of
SOC_CANAAN and introduced SOC_CANAAN_K210 for K210-specific drivers,
Thus, we replace its drivers depends on SOC_CANAAN_K210 and default select
when it has the symbol SOC_CANAAN_K210.
[1] https://lore.kernel.org/linux-riscv/20221121221414.109965-1-conor@kernel.org/
[2] https://lore.kernel.org/linux-riscv/20240305-praying-clad-c4fbcaa7ed0a@spud/
[3] https://lore.kernel.org/linux-riscv/20240305-fled-undrilled-41dc0c46bb29@spud/
[4] https://lore.kernel.org/linux-riscv/20240305-stress-earflap-d7ddb8655a4d@spud/
[5] https://lore.kernel.org/linux-riscv/20240305-praying-clad-c4fbcaa7ed0a@spud/
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Devices sharing a reset GPIO could use the reset framework for
coordinated handling of that shared GPIO line. We have several cases of
such needs, at least for Devicetree-based platforms.
If Devicetree-based device requests a reset line, while "resets"
Devicetree property is missing but there is a "reset-gpios" one,
instantiate a new "reset-gpio" platform device which will handle such
reset line. This allows seamless handling of such shared reset-gpios
without need of changing Devicetree binding [1].
To avoid creating multiple "reset-gpio" platform devices, store the
Devicetree "reset-gpios" GPIO specifiers used for new devices on a
linked list. Later such Devicetree GPIO specifier (phandle to GPIO
controller, GPIO number and GPIO flags) is used to check if reset
controller for given GPIO was already registered.
If two devices have conflicting "reset-gpios" property, e.g. with
different ACTIVE_xxx flags, this would allow to spawn two separate
"reset-gpio" devices, where the second would fail probing on busy GPIO
request.
Link: https://lore.kernel.org/all/YXi5CUCEi7YmNxXM@robh.at.kernel.org/ [1]
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240129115216.96479-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Add a simple driver to control GPIO-based resets using the reset
controller API for the cases when the GPIOs are shared and reset should
be coordinated. The driver is expected to be used by reset core
framework for ad-hoc reset controllers.
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240129115216.96479-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Reuse reset-simple driver for the Sophgo SG2042 reset generator.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/1cfd7b3ba447942784c4f7aa595e962399e9f617.1706577450.git.unicorn_wang@outlook.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"A new drivers/cache/ subsystem is added to contain drivers for
abstracting cache flush methods on riscv and potentially others, as
this is needed for handling non-coherent DMA but several SoCs require
nonstandard hardware methods for it.
op-tee gains support for asynchronous notification with FF-A, as well
as support for a system thread for executing in secure world.
The tee, reset, bus, memory and scmi subsystems have a couple of minor
updates.
Platform specific soc driver changes include:
- Samsung Exynos gains driver support for Google GS101 (Tensor G1)
across multiple subsystems
- Qualcomm Snapdragon gains support for SM8650 and X1E along with
added features for some other SoCs
- Mediatek adds support for "Smart Voltage Scaling" on MT8186 and
MT8195, and driver support for MT8188 along with some code
refactoring.
- Microchip Polarfire FPGA support for "Auto Update" of the FPGA
bitstream
- Apple M1 mailbox driver is rewritten into a SoC driver
- minor updates on amlogic, mvebu, ti, zynq, imx, renesas and
hisilicon"
* tag 'soc-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
memory: ti-emif-pm: Convert to platform remove callback returning void
memory: ti-aemif: Convert to platform remove callback returning void
memory: tegra210-emc: Convert to platform remove callback returning void
memory: tegra186-emc: Convert to platform remove callback returning void
memory: stm32-fmc2-ebi: Convert to platform remove callback returning void
memory: exynos5422-dmc: Convert to platform remove callback returning void
memory: renesas-rpc-if: Convert to platform remove callback returning void
memory: omap-gpmc: Convert to platform remove callback returning void
memory: mtk-smi: Convert to platform remove callback returning void
memory: jz4780-nemc: Convert to platform remove callback returning void
memory: fsl_ifc: Convert to platform remove callback returning void
memory: fsl-corenet-cf: Convert to platform remove callback returning void
memory: emif: Convert to platform remove callback returning void
memory: brcmstb_memc: Convert to platform remove callback returning void
memory: brcmstb_dpfe: Convert to platform remove callback returning void
soc: qcom: llcc: Fix LLCC_TRP_ATTR2_CFGn offset
firmware: qcom: qseecom: fix memory leaks in error paths
dt-bindings: clock: google,gs101: rename CMU_TOP gate defines
soc: qcom: llcc: Fix typo in kernel-doc
dt-bindings: soc: qcom,aoss-qmp: document the X1E80100 Always-On Subsystem side channel
...
|
|
When obtaining one or more optional resets, non-existent resets are
stored as NULL pointers, and all related error and cleanup paths need to
take this into account.
Currently only reset_control_put() and reset_control_bulk_put()
get this right. All of __reset_control_bulk_get(),
of_reset_control_array_get(), and reset_control_array_put() lack the
proper checking, causing NULL pointer dereferences on failure or
release.
Fix this by moving the existing check from reset_control_bulk_put() to
__reset_control_put_internal(), so it applies to all callers.
The double check in reset_control_put() doesn't hurt.
Fixes: 17c82e206d2a3cd8 ("reset: Add APIs to manage array of resets")
Fixes: 48d71395896d54ee ("reset: Add reset_control_bulk API")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/2440edae7ca8534628cdbaf559ded288f2998178.1701276806.git.geert+renesas@glider.be
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20231115205848.3732609-1-robh@kernel.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Add a new compatible string to support for the reset controller
on the C3 SoC. The count and offset for C3 Soc RESET registers are
same as S4 Soc.
Signed-off-by: Zelong Dong <zelong.dong@amlogic.com>
Reviewed-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230914064018.18790-3-zelong.dong@amlogic.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230704120211.38122-7-frank.li@vivo.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230704120211.38122-6-frank.li@vivo.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230704120211.38122-5-frank.li@vivo.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230704120211.38122-4-frank.li@vivo.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230704120211.38122-3-frank.li@vivo.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230704120211.38122-2-frank.li@vivo.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230704120211.38122-1-frank.li@vivo.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
'type' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
hi6220_reset.c:166:9: error: cast to smaller integer type 'enum hi6220_reset_ctrl_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230810091300.70197-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct reset_control_array.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230922175229.work.838-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk subsystem updates from Stephen Boyd:
"This pull request is full of clk driver changes. In fact, there aren't
any changes to the clk framework this time around. That's probably
because everyone was on vacation (yours truly included). We did lose a
couple clk drivers this time around because nobody was using those
devices. That skews the diffstat a bit, but either way, nothing looks
out of the ordinary here. The usual suspects are chugging along adding
support for more SoCs and fixing bugs.
If I had to choose, I'd say the theme for the past few months has been
"polish". There's quite a few patches that migrate to
devm_platform_ioremap_resource() in here. And there's more than a
handful of patches that move the NR_CLKS define from the DT binding
header to the driver. There's even patches that migrate drivers to use
clk_parent_data and clk_hw to describe clk tree topology. It seems
that the spring (summer?) cleaning bug got some folks, or the
semiconductor shortage finally hit the software side.
New Drivers:
- StarFive JH7110 SoC clock drivers
- Qualcomm IPQ5018 Global Clock Controller driver
- Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK
Removed Drivers:
- Remove non-OF mmp clk drivers
- Remove OXNAS clk driver
Updates:
- Add __counted_by to struct clk_hw_onecell_data and struct
spmi_pmic_div_clk_cc
- Move defines for numbers of clks (NR_CLKS) from DT headers to
drivers
- Introduce kstrdup_and_replace() and use it
- Add PLL rates for Rockchip rk3568
- Add the display clock tree for Rockchip rv1126
- Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and
RZ/G2 SoCs
- Convert sun9i-mmc clock to use
devm_platform_get_and_ioremap_resource()
- Fix function name in a comment in ccu_mmc_timing.c
- Parameter name correction for ccu_nkm_round_rate()
- Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e.
consider alternative parent rates when determining clock rates
- Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
- Support finding closest (as opposed to closest but not higher)
clock rate for NM, NKM, mux and div type clocks, as use it for
Allwinner A64 pll-video0
- Prefer current parent rate if able to generate ideal clock rate for
Allwinner NKM clocks
- Clean up Qualcomm SMD RPM driver, with interconnect bus clocks
moved out to the interconnect drivers
- Fix various PM runtime bugs across many Qualcomm clk drivers
- Migrate Qualcomm MDM9615 is to parent_hw and parent_data
- Add network related resets on Qualcomm IPQ4019
- Add a couple missing USB related clocks to Qualcomm IPQ9574
- Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock
controller
- In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs,
and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are
corrected
- Add missing GDSCs to and correct GDSCs for the SC8280XP global
clock controller driver
- Support retention for the Qualcomm SC8280XP display clock
controller GDSCs.
- Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE
to fix issues with missing parent clocks across sc7180, sm7150,
sm6350 and sm8250, while sm8450 is corrected to use floor ops
- Correct Qualcomm SM6350 GPU clock controller's clock supplies
- Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
- Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
- Change the delay in the Qualcomm reset controller to fsleep() for
correctness
- Extend the Qualcomm SM83550 Video clock controller to support
SC8280XP
- Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and
R-Car H3, M3-W, and M3-N SoCs
- Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
- Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() implementation for i.MX GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init()
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for i.MX PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to
allow glitch free switching"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits)
clk: qcom: Fix SM_GPUCC_8450 dependencies
clk: lmk04832: Support using PLL1_LD as SPI readback pin
clk: lmk04832: Don't disable vco clock on probe fail
clk: lmk04832: Set missing parent_names for output clocks
clk: mvebu: Convert to devm_platform_ioremap_resource()
clk: nuvoton: Convert to devm_platform_ioremap_resource()
clk: socfpga: agilex: Convert to devm_platform_ioremap_resource()
clk: ti: Use devm_platform_get_and_ioremap_resource()
clk: mediatek: Convert to devm_platform_ioremap_resource()
clk: hsdk-pll: Convert to devm_platform_ioremap_resource()
clk: gemini: Convert to devm_platform_ioremap_resource()
clk: fsl-sai: Convert to devm_platform_ioremap_resource()
clk: bm1880: Convert to devm_platform_ioremap_resource()
clk: axm5516: Convert to devm_platform_ioremap_resource()
clk: actions: Convert to devm_platform_ioremap_resource()
clk: cdce925: Remove redundant of_match_ptr()
clk: pxa910: Move number of clocks to driver source
clk: pxa1928: Move number of clocks to driver source
clk: pxa168: Move number of clocks to driver source
clk: mmp2: Move number of clocks to driver source
...
|
|
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Acked-by: Andrew Davis <afd@ti.com>
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Link: https://lore.kernel.org/r/20230807111534.12392-1-aboutphysycs@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Link: https://lore.kernel.org/r/20230807114344.15076-1-aboutphysycs@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Link: https://lore.kernel.org/r/20230807113545.14743-1-aboutphysycs@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Link: https://lore.kernel.org/r/20230807112705.12862-1-aboutphysycs@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Link: https://lore.kernel.org/r/20230807105630.11638-1-aboutphysycs@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Link: https://lore.kernel.org/r/20230807105400.11560-1-aboutphysycs@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Link: https://lore.kernel.org/r/20230807104549.11225-1-aboutphysycs@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Link: https://lore.kernel.org/r/20230803104225.29740-1-aboutphysycs@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Link: https://lore.kernel.org/r/20230803104142.29694-1-aboutphysycs@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Link: https://lore.kernel.org/r/20230803104102.29647-1-aboutphysycs@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The probe process may generate EPROBE_DEFER. In this case,
dev_err_probe can still record err information.
This helps simplify code and standardize error output.
Signed-off-by: Wang Ming <machel@vivo.com>
Link: https://lore.kernel.org/r/20230726114555.5011-1-machel@vivo.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Updated the reset driver to support Versal NET platform.
As part of adding support for versal NET:
- Added Versal NET specific compatible string.
- Reset Id and number of resets.
Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Link: https://lore.kernel.org/r/20230721041119.4058430-3-piyush.mehta@amd.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Link: https://lore.kernel.org/r/20230714174939.4063667-1-robh@kernel.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Add new struct members and auxiliary_device_id of resets to support
System-Top-Group, Image-Signal-Process and Video-Output on the StarFive
JH7110 SoC.
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Link: https://lore.kernel.org/r/20230724055440.100947-1-xingyu.wu@starfivetech.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Nothing surprising in the SoC specific drivers, with the usual
updates:
- Added or improved SoC driver support for Tegra234, Exynos4121,
RK3588, as well as multiple Mediatek and Qualcomm chips
- SCMI firmware gains support for multiple SMC/HVC transport and
version 3.2 of the protocol
- Cleanups amd minor changes for the reset controller, memory
controller, firmware and sram drivers
- Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers"
* tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (118 commits)
dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
MAINTAINERS: add PHY-related files to Amlogic SoC file list
drivers: meson: secure-pwrc: always enable DMA domain
tee: optee: Use kmemdup() to replace kmalloc + memcpy
soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer
dt-bindings: sram: qcom,imem: document qdu1000
soc: qcom: icc-bwmon: Fix MSM8998 count unit
dt-bindings: soc: qcom,rpmh-rsc: Require power-domains
soc: qcom: socinfo: Add Soc ID for IPQ5300
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300
soc: qcom: Fix a IS_ERR() vs NULL bug in probe
soc: qcom: socinfo: Add support for new fields in revision 19
soc: qcom: socinfo: Add support for new fields in revision 18
dt-bindings: firmware: scm: Add compatible for SDX75
soc: qcom: mdt_loader: Fix split image detection
dt-bindings: memory-controllers: drop unneeded quotes
soc: rockchip: dtpm: use C99 array init syntax
firmware: tegra: bpmp: Add support for DRAM MRQ GSCs
soc/tegra: pmc: Use devm_clk_notifier_register()
soc/tegra: pmc: Simplify debugfs initialization
...
|
|
The Nuvoton MA35D1 reset controller is only present on Nuvoton MA35
SoCs. Hence add a dependency on ARCH_MA35, to prevent asking the user
about this driver when configuring a kernel without MA35 SoC support.
Also, do not enable the driver by default when merely compile-testing.
While at it, fix a misspelling of "Nuvoton".
Fixes: e4bb55d6ccf0f774 ("reset: Add Nuvoton ma35d1 reset driver support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This driver supports individual IP reset for the MA35D1. The reset
control registers are a subset of the system control registers.
Signed-off-by: Jacky Huang <ychuang3@nuvoton.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
CONFIG_AUXILIARY_BUS is not a user-visible symbol, replace 'depends on'
with 'select'.
Cc: Daire McNamara <daire.mcnamara@microchip.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230502102041.1418397-1-p.zabel@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
CONFIG_AUXILIARY_BUS is not a user-visible symbol, replace 'depends on'
with 'select'.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://lore.kernel.org/r/20230502102050.1418417-1-p.zabel@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
