summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)Author
2024-05-18Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "I'm actually surprised this time. There aren't any new Qualcomm SoC clk drivers. And there's zero diff in the core clk framework. Instead we have new clk drivers for STM and Sophgo, with Samsung^WGoogle in third for the diffstat because they introduced HSI0 and HSI2 clk drivers for Google's GS101 SoC (high speed interface things like PCIe, UFS, and MMC). Beyond those big diffs there's the usual updates to various clk drivers for incorrect parent descriptions or mising MODULE_DEVICE_TABLE()s, etc. Nothing in particular stands out as super interesting here. New Drivers: - STM32MP257 SoC clk driver - Airoha EN7581 SoC clk driver - Sophgo CV1800B, CV1812H and SG2000 SoC clk driver - Loongson-2k0500 and Loongson-2k2000 SoC clk driver - Add HSI0 and HSI2 clock controllers for Google GS101 - Add i.MX95 BLK CTL clock driver Updates: - Allocate clk_ops dynamically for SCMI clk driver - Add support in qcom RCG and RCG2 for multiple configurations for the same frequency - Use above support for IPQ8074 NSS port 5 and 6 clocks to resolve issues - Fix the Qualcomm APSS IPQ5018 PLL to fix boot failures of some boards - Cleanups and fixes for Qualcomm Stromer PLLs - Reduce max CPU frequency on Qualcomm APSS IPQ5018 - Fix Kconfig dependencies of Qualcomm SM8650 GPU and SC8280XP camera clk drivers - Make Qualcomm MSM8998 Venus clocks functional - Cleanup downstream remnants related to DisplayPort across Qualcomm SM8450, SM6350, SM8550, and SM8650 - Reuse the Huayra APSS register map on Qualcomm MSM8996 CBF PLL - Use a specific Qualcomm QCS404 compatible for the otherwise generic HFPLL - Remove Qualcomm SM8150 CPUSS AHB clk as it is unused - Remove an unused field in the Qualcomm RPM clk driver - Add missing MODULE_DEVICE_TABLE to Qualcomm MSM8917 and MSM8953 global clock controller drivers - Allow choice of manual or firmware-driven control over PLLs, needed to fully implement CPU clock controllers on Exynos850 - Correct PLL clock IDs on ExynosAutov9 - Propagate certain clock rates to allow setting proper SPI clock rates on Google GS101 - Mark certain Google GS101 clocks critical - Convert old S3C64xx clock controller bindings to DT schema - Add new PLL rate and missing mux on Rockchip rk3568 - Add missing reset line on Rockchip rk3588 - Removal of an unused field in struct rockchip_mmc_clock - Amlogic s4/a1: add regmap maximum register for proper debugfs dump - Amlogic s4: add MODULE_DEVICE_TABLE() on pll and periph controllers - Amlogic pll driver: print clock name on lock error to help debug - Amlogic vclk: finish dsi clock path support - Amlogic license: fix occurence "GPL v2" as reported by checkpatch - Add PM runtime support to i.MX8MP Audiomix - Add DT schema for i.MX95 Display Master Block Control - Convert to platform remove callback returning void for i.MX8MP Audiomix - Add SPI (MSIOF) and external interrupt (INTC-EX) clocks on Renesas R-Car V4M - Add interrupt controller (PLIC) clock and reset on Renesas RZ/Five - Prepare power domain support for Renesas RZ/G2L family members, and add actual support on Renesas RZ/G3S SoC - Add thermal, serial (SCIF), and timer (CMT/TMU) clocks on Renesas R-Car V4M - Add additional constraints to Allwinner A64 PLL MIPI clock - Fix autoloading sunxi-ng clocks when build as a module" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (118 commits) clk: samsung: Don't register clkdev lookup for the fixed rate clocks clk, reset: microchip: mpfs: fix incorrect preprocessor conditions clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLs clk: qcom: apss-ipq-pll: fix PLL rate for IPQ5018 clk: qcom: Fix SM_GPUCC_8650 dependencies clk: qcom: Fix SC_CAMCC_8280XP dependencies dt-bindings: clocks: stm32mp25: add access-controllers description clock, reset: microchip: move all mpfs reset code to the reset subsystem clk: samsung: gs101: drop unused HSI2 clock parent data clk: rockchip: rk3568: Add PLL rate for 724 MHz clk: rockchip: Remove an unused field in struct rockchip_mmc_clock dt-bindings: clock: fixed: Define a preferred node name clk: meson: s4: fix module autoloading clk: samsung: gs101: mark some apm UASC and XIU clocks critical clk: imx: imx8mp: Convert to platform remove callback returning void clk: imx: imx8mp: Switch to RUNTIME_PM_OPS() clk: bcm: rpi: Assign ->num before accessing ->hws clk: bcm: dvp: Assign ->num before accessing ->hws clk: samsung: gs101: add support for cmu_hsi2 clk: samsung: gs101: add support for cmu_hsi0 ...
2024-05-17Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linuxLinus Torvalds
Pull ARM updates from Russell King: - Updates to AMBA bus subsystem to drop .owner struct device_driver initialisations, moving that to code instead. - Add LPAE privileged-access-never support - Add support for Clang CFI - clkdev: report over-sized device or connection strings * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux: (36 commits) ARM: 9398/1: Fix userspace enter on LPAE with CC_OPTIMIZE_FOR_SIZE=y clkdev: report over-sized strings when creating clkdev entries ARM: 9393/1: mm: Use conditionals for CFI branches ARM: 9392/2: Support CLANG CFI ARM: 9391/2: hw_breakpoint: Handle CFI breakpoints ARM: 9390/2: lib: Annotate loop delay instructions for CFI ARM: 9389/2: mm: Define prototypes for all per-processor calls ARM: 9388/2: mm: Type-annotate all per-processor assembly routines ARM: 9387/2: mm: Rewrite cacheflush vtables in CFI safe C ARM: 9386/2: mm: Use symbol alias for cache functions ARM: 9385/2: mm: Type-annotate all cache assembly routines ARM: 9384/2: mm: Make tlbflush routines CFI safe ARM: 9382/1: ftrace: Define ftrace_stub_graph ARM: 9358/2: Implement PAN for LPAE by TTBR0 page table walks disablement ARM: 9357/2: Reduce the number of #ifdef CONFIG_CPU_SW_DOMAIN_PAN ARM: 9356/2: Move asm statements accessing TTBCR into C functions ARM: 9355/2: Add TTBCR_* definitions to pgtable-3level-hwdef.h ARM: 9379/1: coresight: tpda: drop owner assignment ARM: 9378/1: coresight: etm4x: drop owner assignment ARM: 9377/1: hwrng: nomadik: drop owner assignment ...
2024-05-16Merge branches 'clk-microchip', 'clk-samsung' and 'clk-qcom' into clk-nextStephen Boyd
* clk-microchip: clk, reset: microchip: mpfs: fix incorrect preprocessor conditions clock, reset: microchip: move all mpfs reset code to the reset subsystem * clk-samsung: clk: samsung: Don't register clkdev lookup for the fixed rate clocks clk: samsung: gs101: drop unused HSI2 clock parent data clk: samsung: gs101: mark some apm UASC and XIU clocks critical clk: samsung: gs101: add support for cmu_hsi2 clk: samsung: gs101: add support for cmu_hsi0 dt-bindings: clock: google,gs101-clock: add HSI2 clock management unit dt-bindings: clock: google,gs101-clock: add HSI0 clock management unit clk: samsung: gs101: propagate PERIC1 USI SPI clock rate clk: samsung: gs101: propagate PERIC0 USI SPI clock rate clk: samsung: exynosautov9: fix wrong pll clock id value dt-bindings: clock: samsung,s3c6400-clock: convert to DT Schema clk: samsung: exynos850: Add CMU_CPUCL0 and CMU_CPUCL1 clk: samsung: Implement manual PLL control for ARM64 SoCs * clk-qcom: (27 commits) clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLs clk: qcom: apss-ipq-pll: fix PLL rate for IPQ5018 clk: qcom: Fix SM_GPUCC_8650 dependencies clk: qcom: Fix SC_CAMCC_8280XP dependencies clk: qcom: mmcc-msm8998: fix venus clock issue clk: qcom: dispcc-sm8650: fix DisplayPort clocks clk: qcom: dispcc-sm8550: fix DisplayPort clocks clk: qcom: dispcc-sm6350: fix DisplayPort clocks clk: qcom: dispcc-sm8450: fix DisplayPort clocks clk: qcom: clk-cbf-8996: use HUAYRA_APSS register map for cbf_pll clk: qcom: apss-ipq-pll: constify clk_init_data structures clk: qcom: apss-ipq-pll: constify match data structures clk: qcom: apss-ipq-pll: move Huayra register map to 'clk_alpha_pll_regs' clk: qcom: apss-ipq-pll: reuse Stromer reg offsets from 'clk_alpha_pll_regs' clk: qcom: apss-ipq-pll: use stromer ops for IPQ5018 to fix boot failure clk: qcom: gcc-ipq8074: rework nss_port5/6 clock to multiple conf clk: qcom: clk-rcg2: add support for rcg2 freq multi ops clk: qcom: clk-rcg: introduce support for multiple conf for same freq clk: qcom: hfpll: Add QCS404-specific compatible dt-bindings: clock: qcom,hfpll: Convert to YAML ...
2024-05-16Merge branches 'clk-counted', 'clk-imx', 'clk-amlogic', 'clk-binding' and ↵Stephen Boyd
'clk-rockchip' into clk-next * clk-counted: clk: bcm: rpi: Assign ->num before accessing ->hws clk: bcm: dvp: Assign ->num before accessing ->hws * clk-imx: clk: imx: imx8mp: Convert to platform remove callback returning void clk: imx: imx8mp: Switch to RUNTIME_PM_OPS() clk: imx: add i.MX95 BLK CTL clk driver dt-bindings: clock: support i.MX95 Display Master CSR module dt-bindings: clock: support i.MX95 BLK CTL module dt-bindings: clock: add i.MX95 clock header clk: imx: imx8mp: Add pm_runtime support for power saving * clk-amlogic: clk: meson: s4: fix module autoloading clk: meson: fix module license to GPL only clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF clk: meson: add vclk driver clk: meson: pll: print out pll name when unable to lock it clk: meson: s4: pll: determine maximum register in regmap config clk: meson: s4: peripherals: determine maximum register in regmap config clk: meson: a1: pll: determine maximum register in regmap config clk: meson: a1: peripherals: determine maximum register in regmap config * clk-binding: dt-bindings: clock: fixed: Define a preferred node name * clk-rockchip: clk: rockchip: rk3568: Add PLL rate for 724 MHz clk: rockchip: Remove an unused field in struct rockchip_mmc_clock clk: rockchip: rk3588: Add reset line for HDMI Receiver clk: rockchip: rk3568: Add missing USB480M_PHY mux dt-bindings: reset: Define reset id used for HDMI Receiver dt-bindings: clock: rockchip: add USB480M_PHY mux
2024-05-16Merge branches 'clk-stm', 'clk-renesas', 'clk-scmi' and 'clk-allwinner' into ↵Stephen Boyd
clk-next - STM32MP257 SoC clk driver - Allocate clk_ops dynamically for SCMI clk driver * clk-stm: dt-bindings: clocks: stm32mp25: add access-controllers description clk: stm32: introduce clocks for STM32MP257 platform dt-bindings: clocks: stm32mp25: add description of all parents clk: stm32mp13: use platform device APIs * clk-renesas: clk: renesas: r9a08g045: Add support for power domains clk: renesas: rzg2l: Extend power domain support dt-bindings: clock: renesas,rzg2l-cpg: Update #power-domain-cells = <1> for RZ/G3S dt-bindings: clock: r9a08g045-cpg: Add power domain IDs dt-bindings: clock: r9a07g054-cpg: Add power domain IDs dt-bindings: clock: r9a07g044-cpg: Add power domain IDs dt-bindings: clock: r9a07g043-cpg: Add power domain IDs clk: renesas: shmobile: Remove unused CLK_ENABLE_ON_INIT clk: renesas: r8a7740: Remove unused div4_clk.flags field clk: renesas: r9a07g043: Add clock and reset entry for PLIC clk: renesas: r8a779h0: Add INTC-EX clock clk: renesas: r8a779h0: Add MSIOF clocks clk: renesas: r8a779a0: Fix CANFD parent clock clk: rs9: fix wrong default value for clock amplitude clk: renesas: r8a779h0: Add timer clocks clk: renesas: r8a779h0: Add SCIF clocks clk: renesas: r9a07g044: Mark resets array as const clk: renesas: r9a07g043: Mark mod_clks and resets arrays as const clk: renesas: r8a779h0: Add thermal clock dt-bindings: clock: r9a07g043-cpg: Annotate RZ/G2UL-only core clocks * clk-scmi: clk: scmi: Add support for get/set duty_cycle operations clk: scmi: Add support for re-parenting restricted clocks clk: scmi: Add support for rate change restricted clocks clk: scmi: Add support for state control restricted clocks clk: scmi: Allocate CLK operations dynamically * clk-allwinner: clk: sunxi-ng: fix module autoloading clk: sunxi-ng: a64: Add constraints on PLL-MIPI's n/m ratio and parent rate clk: sunxi-ng: nkm: Support constraints on m/n ratio and parent rate
2024-05-16Merge branches 'clk-cleanup', 'clk-airoha', 'clk-mediatek', 'clk-sophgo' and ↵Stephen Boyd
'clk-loongson' into clk-next - Airoha EN7581 SoC clk driver - Sophgo CV1800B, CV1812H and SG2000 SoC clk driver - Loongson-2k0500 and Loongson-2k2000 SoC clk driver * clk-cleanup: clk: gemini: Remove an unused field in struct clk_gemini_pci clk: highbank: Remove an unused field in struct hb_clk clk: ti: dpll: fix incorrect #ifdef checks clk: nxp: Remove an unused field in struct lpc18xx_pll * clk-airoha: clk: en7523: Add EN7581 support clk: en7523: Add en_clk_soc_data data structure dt-bindings: clock: airoha: add EN7581 binding * clk-mediatek: clk: mediatek: mt8365-mm: fix DPI0 parent clk: mediatek: pllfh: Don't log error for missing fhctl node * clk-sophgo: clk: sophgo: avoid open-coded 64-bit division clk: sophgo: Make synthesizer struct static clk: sophgo: Add clock support for SG2000 SoC clk: sophgo: Add clock support for CV1810 SoC clk: sophgo: Add clock support for CV1800 SoC dt-bindings: clock: sophgo: Add clock controller of SG2000 series SoC * clk-loongson: clk: clk-loongson2: Add Loongson-2K2000 clock support dt-bindings: clock: loongson2: Add Loongson-2K2000 compatible clk: clk-loongson2: Add Loongson-2K0500 clock support dt-bindings: clock: loongson2: Add Loongson-2K0500 compatible clk: clk-loongson2: Refactor driver for adding new platforms dt-bindings: clock: Add Loongson-2K expand clock index
2024-05-16Merge branches 'amba', 'cfi', 'clkdev' and 'misc' into for-linusRussell King (Oracle)
2024-05-14clk: samsung: Don't register clkdev lookup for the fixed rate clocksMarek Szyprowski
Commit 4d11c62ca8d7 ("clkdev: report over-sized strings when creating clkdev entries") revealed that clock lookup is registered for all fixed clocks. The mentioned commit added a check if the registered name is not too long. This fails for some clocks registered for Exynos542x SoCs family. This lookup is a left-over from early common clock framework days, not really needed nowadays, so remove it to avoid further issues. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Tested-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20240510065901.535124-1-m.szyprowski@samsung.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-05-13Merge tag 'soc-drivers-6.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "As usual, these are updates for drivers that are specific to certain SoCs or firmware running on them. Notable updates include - The new STMicroelectronics STM32 "firewall" bus driver that is used to provide a barrier between different parts of an SoC - Lots of updates for the Qualcomm platform drivers, in particular SCM, which gets a rewrite of its initialization code - Firmware driver updates for Arm FF-A notification interrupts and indirect messaging, SCMI firmware support for pin control and vendor specific interfaces, and TEE firmware interface changes across multiple TEE drivers - A larger cleanup of the Mediatek CMDQ driver and some related bits - Kconfig changes for riscv drivers to prepare for adding Kanaan k230 support - Multiple minor updates for the TI sysc bus driver, memory controllers, hisilicon hccs and more" * tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (103 commits) firmware: qcom: uefisecapp: Allow on sc8180x Primus and Flex 5G soc: qcom: pmic_glink: Make client-lock non-sleeping dt-bindings: soc: qcom,wcnss: fix bluetooth address example soc/tegra: pmc: Add EQOS wake event for Tegra194 and Tegra234 bus: stm32_firewall: fix off by one in stm32_firewall_get_firewall() bus: etzpc: introduce ETZPC firewall controller driver firmware: arm_ffa: Avoid queuing work when running on the worker queue bus: ti-sysc: Drop legacy idle quirk handling bus: ti-sysc: Drop legacy quirk handling for smartreflex bus: ti-sysc: Drop legacy quirk handling for uarts bus: ti-sysc: Add a description and copyrights bus: ti-sysc: Move check for no-reset-on-init soc: hisilicon: kunpeng_hccs: replace MAILBOX dependency with PCC soc: hisilicon: kunpeng_hccs: Add the check for obtaining complete port attribute firmware: arm_ffa: Fix memory corruption in ffa_msg_send2() bus: rifsc: introduce RIFSC firewall controller driver of: property: fw_devlink: Add support for "access-controller" soc: mediatek: mtk-socinfo: Correct the marketing name for MT8188GV soc: mediatek: mtk-socinfo: Add entry for MT8395AV/ZA Genio 1200 soc: mediatek: mtk-mutex: Add support for MT8188 VPPSYS ...
2024-05-08clkdev: report over-sized strings when creating clkdev entriesRussell King (Oracle)
Report an error when an attempt to register a clkdev entry results in a truncated string so the problem can be easily spotted. Reported by: Duanqiang Wen <duanqiangwen@net-swift.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2024-05-07clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLsGabor Juhos
The clk_alpha_pll_stromer_set_rate() function writes inproper values into the ALPHA_VAL{,_U} registers which results in wrong clock rates when the alpha value is used. The broken behaviour can be seen on IPQ5018 for example, when dynamic scaling sets the CPU frequency to 800000 KHz. In this case the CPU cores are running only at 792031 KHz: # cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq 800000 # cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq 792031 This happens because the function ignores the fact that the alpha value calculated by the alpha_pll_round_rate() function is only 32 bits wide which must be extended to 40 bits if it is used on a hardware which supports 40 bits wide values. Extend the clk_alpha_pll_stromer_set_rate() function to convert the alpha value to 40 bits before wrinting that into the registers in order to ensure that the hardware really uses the requested rate. After the change the CPU frequency is correct: # cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq 800000 # cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq 800000 Cc: stable@vger.kernel.org Fixes: e47a4f55f240 ("clk: qcom: clk-alpha-pll: Add support for Stromer PLLs") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/r/20240328-alpha-pll-fix-stromer-set-rate-v3-1-1b79714c78bc@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-05-07clk: qcom: apss-ipq-pll: fix PLL rate for IPQ5018Gabor Juhos
According to ipq5018.dtsi, the maximum supported rate by the CPU is 1.008 GHz on the IPQ5018 platform, however the current configuration of the PLL results in 1.2 GHz rate. Change the 'L' value in the PLL configuration to limit the rate to 1.008 GHz. The downstream kernel also uses the same value [1]. Also add a comment to indicate the desired frequency. [1] https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4/drivers/clk/qcom/apss-ipq5018.c?ref_type=heads#L151 Fixes: 50492f929486 ("clk: qcom: apss-ipq-pll: add support for IPQ5018") Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240326-fix-ipq5018-apss-pll-rate-v1-1-82ab31c9da7e@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-05-07clk: qcom: Fix SM_GPUCC_8650 dependenciesNathan Chancellor
CONFIG_SM_GCC_8650 depends on ARM64 but it is selected by CONFIG_SM_GPUCC_8650, which can be selected on ARM, resulting in a Kconfig warning. WARNING: unmet direct dependencies detected for SM_GCC_8650 Depends on [n]: COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] && (ARM64 || COMPILE_TEST [=n]) Selected by [y]: - SM_GPUCC_8650 [=y] && COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] Add the same dependencies to CONFIG_SM_GPUCC_8650 to resolve the warning. Fixes: 8676fd4f3874 ("clk: qcom: add the SM8650 GPU Clock Controller driver") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240318-fix-some-qcom-kconfig-deps-v1-2-ea0773e3df5a@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-05-07clk: qcom: Fix SC_CAMCC_8280XP dependenciesNathan Chancellor
CONFIG_SC_GCC_8280XP depends on ARM64 but it is selected by CONFIG_SC_CAMCC_8280XP, which can be selected on ARM, resulting in a Kconfig warning. WARNING: unmet direct dependencies detected for SC_GCC_8280XP Depends on [n]: COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] && (ARM64 || COMPILE_TEST [=n]) Selected by [y]: - SC_CAMCC_8280XP [=y] && COMMON_CLK [=y] && COMMON_CLK_QCOM [=y] Add the same dependencies to CONFIG_SC_CAMCC_8280XP to resolve the warning. Fixes: ff93872a9c61 ("clk: qcom: camcc-sc8280xp: Add sc8280xp CAMCC") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240318-fix-some-qcom-kconfig-deps-v1-1-ea0773e3df5a@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-05-07clock, reset: microchip: move all mpfs reset code to the reset subsystemConor Dooley
Stephen and Philipp, while reviewing patches, said that all of the aux device creation and the register read/write code could be moved to the reset subsystem, leaving the clock driver with no implementations of reset_* functions at all. Move them. Suggested-by: Philipp Zabel <p.zabel@pengutronix.de> Suggested-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240424-strangle-sharpener-34755c5e6e3e@spud Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-05-07clk: samsung: gs101: drop unused HSI2 clock parent dataKrzysztof Kozlowski
Drop static const arrays with HSI2 clocks parent data which are not referenced by any clock. This might cause -Werror=unused-const-variable warnings. Reported-by: Stephen Boyd <sboyd@kernel.org> Closes: https://lore.kernel.org/all/8bf65df598680f0785c3d6db70acfb9a.sboyd@kernel.org/ Fixes: 093c290084a4 ("clk: samsung: gs101: add support for cmu_hsi2") Reviewed-by: Peter Griffin <peter.griffin@linaro.org> Link: https://lore.kernel.org/r/20240507055948.34554-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-05-04clk: rockchip: rk3568: Add PLL rate for 724 MHzLucas Stach
This rate allows to provide a low-jitter 72,4 MHz pixelclock for a custom eDP panel from the VPLL. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://lore.kernel.org/r/20240503153329.3906030-1-l.stach@pengutronix.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-04clk: rockchip: Remove an unused field in struct rockchip_mmc_clockChristophe JAILLET
In "struct rockchip_mmc_clock", the 'id' field is unused. Remove it. Found with cppcheck, unusedStructMember. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/410bc0f86c7b9f1c80f8a4e9a2a028a9a6ee1ec0.1713970085.git.christophe.jaillet@wanadoo.fr Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-05-03clk: meson: s4: fix module autoloadingKrzysztof Kozlowski
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Clocks are considered core components, so usually they are built-in, however these can be built and used as modules on some generic kernel. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20240410155406.224128-1-krzk@kernel.org Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2024-05-03clk: samsung: gs101: mark some apm UASC and XIU clocks criticalAndré Draszik
The system hangs when any of these clocks are turned off. With the introduction of pinctrl clock support [1], the approach taken in this clock driver for the APM clocks to rely solely on the clk_ignore_unused kernel command line option does not work anymore and the system hangs during boot. gout_apm_func is a parent clock to the clocks that are going to be handled by the pinctrl driver [2], namely gout_apm_apbif_gpio_alive_pclk and gout_apm_apbif_gpio_far_alive_pclk. It also is the parent to the clocks marked as critical in this commit here (and some others that aren't relevant for this commit)). This means that once the pinctrl driver decides to turn off clocks, the clock framework will subsequently turn off parent clocks of those pinctrl clocks if they have no (apparent) user. Since gout_apm_func is the parent, and since no drivers are hooked up to it or any of its other children, gout_apm_func will be turned off. This will cause the system to hang, as the clocks marked as critical in this commit stop having an input. We might have to add a driver for these clocks, but in the meantime let's just ensure they stay on even if siblings are turned off. For the avoidance of doubt: This commit doesn't mean that we can boot without clk_ignore_unused. Link: https://lore.kernel.org/r/20240426-samsung-pinctrl-busclock-v3-0-adb8664b8a7e@linaro.org [1] Link: https://lore.kernel.org/r/20240429-samsung-pinctrl-busclock-dts-v1-0-5e935179f3ca@linaro.org [2] Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://lore.kernel.org/r/20240430-gs101-apm-clocks-v1-1-b2e2335e84f5@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-05-01clk: imx: imx8mp: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Fixes: 1496dd413b2e ("clk: imx: imx8mp: Add pm_runtime support for power saving") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20240423071232.463201-2-u.kleine-koenig@pengutronix.de Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2024-05-01clk: imx: imx8mp: Switch to RUNTIME_PM_OPS()Fabio Estevam
Replace SET_RUNTIME_PM_OPS() with its modern alternative RUNTIME_PM_OPS(). The combined usage of pm_ptr() and RUNTIME_PM_OPS() allows the compiler to evaluate if the suspend/resume() functions are used at buid time or are simply dead code. This fixes the following s390 allmodconfig build errors: drivers/clk/imx/clk-imx8mp-audiomix.c:363:12: error: 'clk_imx8mp_audiomix_runtime_resume' defined but not used [-Werror=unused-function] 363 | static int clk_imx8mp_audiomix_runtime_resume(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/clk/imx/clk-imx8mp-audiomix.c:356:12: error: 'clk_imx8mp_audiomix_runtime_suspend' defined but not used [-Werror=unused-function] 356 | static int clk_imx8mp_audiomix_runtime_suspend(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Closes: https://lore.kernel.org/linux-clk/CA+G9fYuP7S+a89Ep5g5_Ad69EMwRkJ8nM+MMTzbEcP+6H2oMXQ@mail.gmail.com/T/#u Fixes: 1496dd413b2e ("clk: imx: imx8mp: Add pm_runtime support for power saving") Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20240429214502.1363592-1-festevam@gmail.com Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
2024-04-30clk: samsung: Revert "clk: Use device_get_match_data()"Marek Szyprowski
device_get_match_data() function should not be used on the device other than the one matched to the given driver, because it always returns the match_data of the matched driver. In case of exynos-clkout driver, the original code matches the OF IDs on the PARENT device, so replacing it with of_device_get_match_data() broke the driver. This has been already pointed once in commit 2bc5febd05ab ("clk: samsung: Revert "clk: samsung: exynos-clkout: Use of_device_get_match_data()""). To avoid further confusion, add a comment about this special case, which requires direct of_match_device() call to pass custom IDs array. This partially reverts commit 409c39ec92a35e3708f5b5798c78eae78512cd71. Cc: <stable@vger.kernel.org> Fixes: 409c39ec92a3 ("clk: Use device_get_match_data()") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20240425075628.838497-1-m.szyprowski@samsung.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240430184656.357805-1-krzysztof.kozlowski@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-04-29clk: bcm: rpi: Assign ->num before accessing ->hwsNathan Chancellor
Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by") annotated the hws member of 'struct clk_hw_onecell_data' with __counted_by, which informs the bounds sanitizer about the number of elements in hws, so that it can warn when hws is accessed out of bounds. As noted in that change, the __counted_by member must be initialized with the number of elements before the first array access happens, otherwise there will be a warning from each access prior to the initialization because the number of elements is zero. This occurs in raspberrypi_discover_clocks() due to ->num being assigned after ->hws has been accessed: UBSAN: array-index-out-of-bounds in drivers/clk/bcm/clk-raspberrypi.c:374:4 index 3 is out of range for type 'struct clk_hw *[] __counted_by(num)' (aka 'struct clk_hw *[]') Move the ->num initialization to before the first access of ->hws, which clears up the warning. Cc: stable@vger.kernel.org Fixes: f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20240425-cbl-bcm-assign-counted-by-val-before-access-v1-2-e2db3b82d5ef@kernel.org Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-04-29clk: bcm: dvp: Assign ->num before accessing ->hwsNathan Chancellor
Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by") annotated the hws member of 'struct clk_hw_onecell_data' with __counted_by, which informs the bounds sanitizer about the number of elements in hws, so that it can warn when hws is accessed out of bounds. As noted in that change, the __counted_by member must be initialized with the number of elements before the first array access happens, otherwise there will be a warning from each access prior to the initialization because the number of elements is zero. This occurs in clk_dvp_probe() due to ->num being assigned after ->hws has been accessed: UBSAN: array-index-out-of-bounds in drivers/clk/bcm/clk-bcm2711-dvp.c:59:2 index 0 is out of range for type 'struct clk_hw *[] __counted_by(num)' (aka 'struct clk_hw *[]') Move the ->num initialization to before the first access of ->hws, which clears up the warning. Cc: stable@vger.kernel.org Fixes: f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with __counted_by") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20240425-cbl-bcm-assign-counted-by-val-before-access-v1-1-e2db3b82d5ef@kernel.org Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2024-04-29Merge tag 'renesas-clk-for-v6.10-tag2' of ↵Stephen Boyd
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas Pull more Renesas clk driver updates from Geert Uytterhoeven: - Miscellaneous fixes and improvements - Add SPI (MSIOF) and external interrupt (INTC-EX) clocks on R-Car V4M - Add interrupt controller (PLIC) clock and reset on RZ/Five - Prepare power domain support for RZ/G2L family members, and add actual support on RZ/G3S SoC * tag 'renesas-clk-for-v6.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: clk: renesas: r9a08g045: Add support for power domains clk: renesas: rzg2l: Extend power domain support dt-bindings: clock: renesas,rzg2l-cpg: Update #power-domain-cells = <1> for RZ/G3S dt-bindings: clock: r9a08g045-cpg: Add power domain IDs dt-bindings: clock: r9a07g054-cpg: Add power domain IDs dt-bindings: clock: r9a07g044-cpg: Add power domain IDs dt-bindings: clock: r9a07g043-cpg: Add power domain IDs clk: renesas: shmobile: Remove unused CLK_ENABLE_ON_INIT clk: renesas: r8a7740: Remove unused div4_clk.flags field clk: renesas: r9a07g043: Add clock and reset entry for PLIC clk: renesas: r8a779h0: Add INTC-EX clock clk: renesas: r8a779h0: Add MSIOF clocks clk: renesas: r8a779a0: Fix CANFD parent clock
2024-04-29Merge tag 'sunxi-clk-fixes-for-6.9-1' of ↵Stephen Boyd
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-fixes Pull Allwinner clk driver fixes from Jernej Skrabec: - fix H6 CPU rate change via reparenting - set A64 MIPI PLL min & max rate * tag 'sunxi-clk-fixes-for-6.9-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: clk: sunxi-ng: a64: Set minimum and maximum rate for PLL-MIPI clk: sunxi-ng: common: Support minimum and maximum rate clk: sunxi-ng: h6: Reparent CPUX during PLL CPUX rate change
2024-04-29clk: samsung: gs101: add support for cmu_hsi2Peter Griffin
CMU_HSI2 is the clock management unit used for the hsi2 block. HSI stands for High Speed Interface and as such it generates clocks for PCIe, UFS and MMC card. This patch adds support for the muxes, dividers, and gates in cmu_hsi2. The following clocks are marked CLK_IS_CRITICAL as disabling them results in an immediate system hang. CLK_GOUT_HSI2_HSI2_CMU_HSI2_PCLK CLK_GOUT_HSI2_LHM_AXI_P_HSI2_I_CLK The following clocks are marked CLK_IGNORE_UNUSED as they are needed for UFS to be functional. CLK_GOUT_HSI2_SSMT_HSI2_ACLK CLK_GOUT_HSI2_SSMT_HSI2_PCLK CLK_GOUT_HSI2_LHS_ACEL_D_HSI2_I_CLK CLK_GOUT_HSI2_SYSMMU_HSI2_CLK_S2 CLK_GOUT_HSI2_XIU_D_HSI2_ACLK CLK_GOUT_HSI2_XIU_P_HSI2_ACLK CLK_GOUT_HSI2_GPIO_HSI2_PCLK is marked CLK_IGNORE_UNUSED until the exynos pinctrl clock patches land then it can be removed. Some clocks in this unit have very long names. To help with this the clock name mangling strategy was updated to include removing the following sub-strings. - G4X2_DWC_PCIE_CTL_ - G4X1_DWC_PCIE_CTL_ - PCIE_SUB_CTRL_ - INST_0_ - LN05LPE_ - TM_WRAPPER_ - SF_ Signed-off-by: Peter Griffin <peter.griffin@linaro.org> [AD: resolve merge conflicts] Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: André Draszik <andre.draszik@linaro.org> Link: https://lore.kernel.org/r/20240429-hsi0-gs101-v3-3-f233be0a2455@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-04-29clk: samsung: gs101: add support for cmu_hsi0André Draszik
CMU_HSI0 is the clock management unit for one of the high speed interfaces, which is used (amongst others) for USB Some notes about the clocks marked as CLK_IGNORE_UNUSED: * CLK_GOUT_HSI0_PCLK CLK_GOUT_HSI0_LHM_AXI_P_HSI0_I_CLK CLK_GOUT_HSI0_XIU_P_HSI0_ACLK need to be kept running as otherwise the system becomes unresponsive and it doesn't complete booting. * CLK_GOUT_HSI0_LHS_ACEL_D_HSI0_I_CLK CLK_GOUT_HSI0_SSMT_USB_ACLK CLK_GOUT_HSI0_SSMT_USB_PCLK CLK_GOUT_HSI0_SYSMMU_USB_CLK_S2 CLK_GOUT_HSI0_XIU_D0_HSI0_ACLK CLK_GOUT_HSI0_XIU_D1_HSI0_ACLK are needed for USB to come up properly (SSMT is for (secure) memory tagging). While at the moment we only support booting with the clk_ignore_unused kernel command line paramenter, it's still worthwhile to explicitly mark those clocks. While the usual (sed) script has been used to derive the linux clock names from the data sheet, one manual tweak was applied to fix a typo coming from the data sheet which we don't want to carry: hsi0_uspdpdbg_user -> hsi0_usbdpdbg_user (note usb vs usp). Signed-off-by: André Draszik <andre.draszik@linaro.org> Link: https://lore.kernel.org/r/20240426-hsi0-gs101-v2-4-2157da8b63e3@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-04-27clk: qcom: mmcc-msm8998: fix venus clock issueMarc Gonzalez
Right now, msm8998 video decoder (venus) is non-functional: $ time mpv --hwdec=v4l2m2m-copy --vd-lavc-software-fallback=no --vo=null --no-audio --untimed --length=30 --quiet demo-480.webm (+) Video --vid=1 (*) (vp9 854x480 29.970fps) Audio --aid=1 --alang=eng (*) (opus 2ch 48000Hz) [ffmpeg/video] vp9_v4l2m2m: output VIDIOC_REQBUFS failed: Connection timed out [ffmpeg/video] vp9_v4l2m2m: no v4l2 output context's buffers [ffmpeg/video] vp9_v4l2m2m: can't configure decoder Could not open codec. Software decoding fallback is disabled. Exiting... (Quit) Bryan O'Donoghue suggested the proper fix: - Set required register offsets in venus GDSC structs. - Set HW_CTRL flag. $ time mpv --hwdec=v4l2m2m-copy --vd-lavc-software-fallback=no --vo=null --no-audio --untimed --length=30 --quiet demo-480.webm (+) Video --vid=1 (*) (vp9 854x480 29.970fps) Audio --aid=1 --alang=eng (*) (opus 2ch 48000Hz) [ffmpeg/video] vp9_v4l2m2m: VIDIOC_G_FMT ioctl [ffmpeg/video] vp9_v4l2m2m: VIDIOC_G_FMT ioctl ... Using hardware decoding (v4l2m2m-copy). VO: [null] 854x480 nv12 Exiting... (End of file) real 0m3.315s user 0m1.277s sys 0m0.453s NOTES: GDSC = Globally Distributed Switch Controller Use same code as mmcc-msm8996 with: s/venus_gdsc/video_top_gdsc/ s/venus_core0_gdsc/video_subcore0_gdsc/ s/venus_core1_gdsc/video_subcore1_gdsc/ https://git.codelinaro.org/clo/la/kernel/msm-4.4/-/blob/caf_migration/kernel.lnx.4.4.r38-rel/include/dt-bindings/clock/msm-clocks-hwio-8996.h https://git.codelinaro.org/clo/la/kernel/msm-4.4/-/blob/caf_migration/kernel.lnx.4.4.r38-rel/include/dt-bindings/clock/msm-clocks-hwio-8998.h 0x1024 = MMSS_VIDEO GDSCR (undocumented) 0x1028 = MMSS_VIDEO_CORE_CBCR 0x1030 = MMSS_VIDEO_AHB_CBCR 0x1034 = MMSS_VIDEO_AXI_CBCR 0x1038 = MMSS_VIDEO_MAXI_CBCR 0x1040 = MMSS_VIDEO_SUBCORE0 GDSCR (undocumented) 0x1044 = MMSS_VIDEO_SUBCORE1 GDSCR (undocumented) 0x1048 = MMSS_VIDEO_SUBCORE0_CBCR 0x104c = MMSS_VIDEO_SUBCORE1_CBCR Fixes: d14b15b5931c2b ("clk: qcom: Add MSM8998 Multimedia Clock Controller (MMCC) driver") Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://lore.kernel.org/r/ff4e2e34-a677-4c39-8c29-83655c5512ae@freebox.fr Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-27clk: qcom: dispcc-sm8650: fix DisplayPort clocksDmitry Baryshkov
On SM8650 DisplayPort link clocks use frequency tables inherited from the vendor kernel, it is not applicable in the upstream kernel. Drop frequency tables and use clk_byte2_ops for those clocks. This fixes frequency selection in the OPP core (which otherwise attempts to use invalid 810 KHz as DP link rate), also fixing the following message: msm-dp-display af54000.displayport-controller: _opp_config_clk_single: failed to set clock rate: -22 Fixes: 9e939f008338 ("clk: qcom: add the SM8650 Display Clock Controller driver") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240424-dispcc-dp-clocks-v2-4-b44038f3fa96@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-27clk: qcom: dispcc-sm8550: fix DisplayPort clocksDmitry Baryshkov
On SM8550 DisplayPort link clocks use frequency tables inherited from the vendor kernel, it is not applicable in the upstream kernel. Drop frequency tables and use clk_byte2_ops for those clocks. This fixes frequency selection in the OPP core (which otherwise attempts to use invalid 810 KHz as DP link rate), also fixing the following message: msm-dp-display ae90000.displayport-controller: _opp_config_clk_single: failed to set clock rate: -22 Fixes: 90114ca11476 ("clk: qcom: add SM8550 DISPCC driver") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240424-dispcc-dp-clocks-v2-3-b44038f3fa96@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-27clk: qcom: dispcc-sm6350: fix DisplayPort clocksDmitry Baryshkov
On SM6350 DisplayPort link clocks use frequency tables inherited from the vendor kernel, it is not applicable in the upstream kernel. Drop frequency tables and use clk_byte2_ops for those clocks. This fixes frequency selection in the OPP core (which otherwise attempts to use invalid 810 KHz as DP link rate), also fixing the following message: msm-dp-display ae90000.displayport-controller: _opp_config_clk_single: failed to set clock rate: -22 Fixes: 837519775f1d ("clk: qcom: Add display clock controller driver for SM6350") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Tested-by: Luca Weiss <luca.weiss@fairphone.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240424-dispcc-dp-clocks-v2-2-b44038f3fa96@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-27clk: qcom: dispcc-sm8450: fix DisplayPort clocksDmitry Baryshkov
On SM8450 DisplayPort link clocks use frequency tables inherited from the vendor kernel, it is not applicable in the upstream kernel. Drop frequency tables and use clk_byte2_ops for those clocks. This fixes frequency selection in the OPP core (which otherwise attempts to use invalid 810 KHz as DP link rate), also fixing the following message: msm-dp-display ae90000.displayport-controller: _opp_config_clk_single: failed to set clock rate: -22 Fixes: 16fb89f92ec4 ("clk: qcom: Add support for Display Clock Controller on SM8450") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240424-dispcc-dp-clocks-v2-1-b44038f3fa96@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-27clk: qcom: clk-cbf-8996: use HUAYRA_APSS register map for cbf_pllGabor Juhos
The register map used for 'cbf_pll' is the same as the one defined for the CLK_ALPHA_PLL_TYPE_HUAYRA_APSS indice in the 'clk_alpha_pll_regs' array. Drop the local register map and use the global one instead to reduce code duplication. No functional changes intended. Compile tested only. Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/r/20240328-apss-ipq-pll-cleanup-v4-5-eddbf617f0c8@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-27clk: qcom: apss-ipq-pll: constify clk_init_data structuresGabor Juhos
The clk_init_data structures are never modified, so add const qualifier to the ones where it is missing. No functional changes. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/r/20240328-apss-ipq-pll-cleanup-v4-4-eddbf617f0c8@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-27clk: qcom: apss-ipq-pll: constify match data structuresGabor Juhos
The match data structures are used only by the apss_ipq_pll_probe() function and are never modified so mark those as constant. No functional changes. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/r/20240328-apss-ipq-pll-cleanup-v4-3-eddbf617f0c8@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-27clk: qcom: apss-ipq-pll: move Huayra register map to 'clk_alpha_pll_regs'Gabor Juhos
Move the locally defined Huayra register map to 'clk_alpha_pll_regs' in order to allow using that by other drivers, like the clk-cbf-8996. No functional changes. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/r/20240328-apss-ipq-pll-cleanup-v4-2-eddbf617f0c8@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-27clk: qcom: apss-ipq-pll: reuse Stromer reg offsets from 'clk_alpha_pll_regs'Gabor Juhos
The register offset array defined locally for the CLK_ALPHA_PLL_TYPE_STROMER_PLUS is the same as the entry defined for CLK_ALPHA_PLL_TYPE_STROMER in the 'clk_alpha_pll_regs' array. To avoid code duplication, remove the local definition and use the global one instead. No functional changes. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Link: https://lore.kernel.org/r/20240328-apss-ipq-pll-cleanup-v4-1-eddbf617f0c8@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-27Merge branch ↵Bjorn Andersson
'20240315-apss-ipq-pll-ipq5018-hang-v2-1-6fe30ada2009@gmail.com' into clk-for-6.10 Merge IPQ5018 boot failure fix from topic branch, in order to be able to add subsequent cleanup patches on top, for v6.10.
2024-04-27clk: qcom: apss-ipq-pll: use stromer ops for IPQ5018 to fix boot failureGabor Juhos
Booting v6.8 results in a hang on various IPQ5018 based boards. Investigating the problem showed that the hang happens when the clk_alpha_pll_stromer_plus_set_rate() function tries to write into the PLL_MODE register of the APSS PLL. Checking the downstream code revealed that it uses [1] stromer specific operations for IPQ5018, whereas in the current code the stromer plus specific operations are used. The ops in the 'ipq_pll_stromer_plus' clock definition can't be changed since that is needed for IPQ5332, so add a new alpha pll clock declaration which uses the correct stromer ops and use this new clock for IPQ5018 to avoid the boot failure. Also, change pll_type in 'ipq5018_pll_data' to CLK_ALPHA_PLL_TYPE_STROMER to better reflect that it is a Stromer PLL and change the apss_ipq_pll_probe() function accordingly. 1. https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4/drivers/clk/qcom/apss-ipq5018.c#L67 Cc: stable@vger.kernel.org Fixes: 50492f929486 ("clk: qcom: apss-ipq-pll: add support for IPQ5018") Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Tested-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com> Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com> Link: https://lore.kernel.org/r/20240315-apss-ipq-pll-ipq5018-hang-v2-1-6fe30ada2009@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-27clk: qcom: gcc-ipq8074: rework nss_port5/6 clock to multiple confChristian Marangi
Rework nss_port5/6 to use the new multiple configuration implementation and correctly fix the clocks for these port under some corner case. This is particularly relevant for device that have 2.5G or 10G port connected to port5 or port 6 on ipq8074. As the parent are shared across multiple port it may be required to select the correct configuration to accomplish the desired clock. Without this patch such port doesn't work in some specific ethernet speed as the clock will be set to the wrong frequency as we just select the first configuration for the related frequency instead of selecting the best one. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20231220221724.3822-4-ansuelsmth@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-27clk: qcom: clk-rcg2: add support for rcg2 freq multi opsChristian Marangi
Some RCG frequency can be reached by multiple configuration. Add clk_rcg2_fm_ops ops to support these special RCG configurations. These alternative ops will select the frequency using a CEIL policy. When the correct frequency is found, the correct config is selected by calculating the final rate (by checking the defined parent and values in the config that is being checked) and deciding based on the one that is less different than the requested one. These check are skipped if there is just one config for the requested freq. qcom_find_freq_multi is added to search the freq with the new struct freq_multi_tbl. __clk_rcg2_select_conf is used to select the correct conf by simulating the final clock. If a conf can't be found due to parent not reachable, a WARN is printed and -EINVAL is returned. Tested-by: Wei Lei <quic_leiwei@quicinc.com> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20231220221724.3822-3-ansuelsmth@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-27clk: qcom: clk-rcg: introduce support for multiple conf for same freqChristian Marangi
Some RCG frequency can be reached by multiple configuration. We currently declare multiple configuration for the same frequency but that is not supported and always the first configuration will be taken. These multiple configuration are needed as based on the current parent configuration, it may be needed to use a different configuration to reach the same frequency. To handle this introduce 3 new macro, C, FM and FMS: - C is used to declare a freq_conf where src, pre_div, m and n are provided. - FM is used to declare a freq_multi_tbl with the frequency and an array of confs to insert all the config for the provided frequency. - FMS is used to declare a freq_multi_tbl with the frequency and an array of a single conf with the provided src, pre_div, m and n. Struct clk_rcg2 is changed to add a union type to reference a simple freq_tbl or a complex freq_multi_tbl. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20231220221724.3822-2-ansuelsmth@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-25clk: renesas: r9a08g045: Add support for power domainsClaudiu Beznea
Instantiate power domains for the currently enabled IPs of the R9A08G045 SoC. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20240422105355.1622177-8-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-04-25clk: renesas: rzg2l: Extend power domain supportClaudiu Beznea
RZ/{G2L, V2L, G3S}-based CPG versions have support for saving extra power when clocks are disabled by activating module standby. This is done through MSTOP-specific registers that are part of CPG. Each individual module has one or more bits associated with one MSTOP register (see table "Registers for Module Standby Mode" from HW manuals). Hardware manual associates modules' clocks with one or more MSTOP bits. There are 3 mappings available (identified by researching RZ/G2L, RZ/G3S, RZ/V2L HW manuals): case 1: N clocks mapped to N MSTOP bits (with N={0, ..., X}) case 2: N clocks mapped to 1 MSTOP bit (with N={0, ..., X}) case 3: N clocks mapped to M MSTOP bits (with N={0, ..., X}, M={0, ..., Y}) Case 3 has been currently identified on RZ/V2L for the VCPL4 module. To cover all three cases, the individual platform drivers will provide the clock driver with MSTOP register offsets and associated bits in this register as a bitmask, and the clock driver will apply this bitmask to the proper MSTOP register. The MSTOP support was implemented through power domains. Platform-specific clock drivers will register an array of type struct rzg2l_cpg_pm_domain_init_data, which will be used to instantiate properly the power domains. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20240422105355.1622177-7-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-04-25clk: renesas: shmobile: Remove unused CLK_ENABLE_ON_INITGeert Uytterhoeven
CLK_ENABLE_ON_INIT is a relic from the old SH clock framework. It is not used on SH/R-Mobile ARM drivers. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/f01e60a1007afe9385ddc10c4665752857ba4135.1714032122.git.geert+renesas@glider.be
2024-04-25clk: renesas: r8a7740: Remove unused div4_clk.flags fieldChristophe JAILLET
In "struct div4_clk", the "flags" field is unused. Remove it, and update the "div4_clks" array accordingly. Found with cppcheck, unusedStructMember. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/658e6b1b23d5b66646bb830361b8c55ccf797771.1713025170.git.christophe.jaillet@wanadoo.fr Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-04-23clk: qcom: hfpll: Add QCS404-specific compatibleLuca Weiss
It doesn't appear that the configuration is for the HFPLL is generic, so add a qcs404-specific compatible and rename the existing struct to qcs404. Keep qcom,hfpll in the driver for compatibility with old dtbs. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20240218-hfpll-yaml-v2-2-31543e0d6261@z3ntu.xyz Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-23clk: renesas: r9a07g043: Add clock and reset entry for PLICLad Prabhakar
Add the missing clock and reset entry for PLIC. Also add R9A07G043_NCEPLIC_ACLK to the critical clocks list. Fixes: 95d48d270305ad2c ("clk: renesas: r9a07g043: Add support for RZ/Five SoC") Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20240403200952.633084-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-11-25 09:40:10 +0000