| Age | Commit message (Collapse) | Author |
|---|
|
Add support for parent_hw in system clock drivers.
With this parent-child relation is described with pointers rather
than strings making registration a bit faster.
All the SoC based drivers that rely on clk-system were adapted
to the new API change. The switch itself for SoCs will be done
in subsequent patches.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230615093227.576102-7-claudiu.beznea@microchip.com
|
|
Add support for parent_hw in programmable clock driver.
With this parent-child relation is described with pointers rather
than strings making registration a bit faster.
All the SoC based drivers that rely on clk-programmable were adapted
to the new API change. The switch itself for SoCs will be done
in subsequent patches.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230615093227.576102-6-claudiu.beznea@microchip.com
|
|
Add support for parent_hw in peripheral clock drivers.
With this parent-child relation is described with pointers rather
than strings making registration a bit faster.
All the SoC based drivers that rely on clk-peripheral were adapted
to the new API change. The switch itself for SoCs will be done
in subsequent patches.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230615093227.576102-5-claudiu.beznea@microchip.com
|
|
Add support for parent_hw in master clock drivers.
With this parent-child relation is described with pointers rather
than strings making registration a bit faster.
All the SoC based drivers that rely on clk-master were adapted
to the new API change. The switch itself for SoCs will be done
in subsequent patches.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230615093227.576102-4-claudiu.beznea@microchip.com
|
|
Add support for parent_data and parent_hw in main oscillator clock drivers.
With this parent-child relations are described with pointers rather
than strings making registration a bit faster.
All the SoC based drivers that rely on clk-main were adapted
to the new API change. The switch itself for SoCs will be done
in subsequent patches.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20230615093227.576102-2-claudiu.beznea@microchip.com
|
|
Mark DDR clocks as critical for AT91 devices. These clocks are enabled
by bootloader when initializing DDR and needs to stay enabled. Up to
this patch the DDR clocks were requested from drivers/memory/atmel-sdramc.c
which does only clock request and enable. There is no need to have
a separate driver just for this, thus the atmel-sdramc.c will be deleted
in a subsequent patch.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221208114515.35179-2-claudiu.beznea@microchip.com
|
|
Referring to the datasheet the index 2 is the MCKUDP. When enabled, it
"Enables the automatic disable of the Master Clock of the USB Device
Port when a suspend condition occurs". We fix the index to the real UDP
id which "Enables the 48 MHz clock of the USB Device Port".
Cc: nicolas.ferre@microchip.com
Cc: ludovic.desroches@microchip.com
Cc: alexandre.belloni@bootlin.com
Cc: mturquette@baylibre.com
Cc: sboyd@kernel.org
Cc: claudiu.beznea@microchip.com
Cc: linux-clk@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: kernel@pengutronix.de
Fixes: 02ff48e4d7f7 ("clk: at91: add at91rm9200 pmc driver")
Fixes: 0e0e528d8260 ("ARM: dts: at91: rm9200: switch to new clock bindings")
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221114185923.1023249-2-m.grzeschik@pengutronix.de
|
|
Commit facb87ad7560 ("clk: at91: sama7g5: remove prescaler part of master
clock") removed the master clock's prescaler from clock tree of SAMA7G5
as it has been discovered that there is a hardware bug when trying to
change it at run-time (bug is described in description of
commit facb87ad7560 ("clk: at91: sama7g5: remove prescaler part of master
clock")). This was previously changed at CPUFreq driver request. Thus, with
commit facb87ad7560 ("clk: at91: sama7g5: remove prescaler part of master
clock") there is no need of code that handles run-time changes of master
clock's prescaler, thus remove this code.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220203110202.18329-1-claudiu.beznea@microchip.com
|
|
SAMA7G5 supports DVFS by changing cpuck. On SAMA7G5 mck0 shares the same
parent with cpuck as seen in the following clock tree:
+----------> cpuck
|
FRAC PLL ---> DIV PLL -+-> DIV ---> mck0
mck0 could go b/w 32KHz and 200MHz on SAMA7G5. To avoid mck0 overclocking
while changing FRAC PLL or DIV PLL the commit implements a notifier for
mck0 which applies a safe divider to register (maximum value of the divider
which is 5) on PRE_RATE_CHANGE events (such that changes on PLL to not
overclock mck0) and sets the maximum allowed rate on POST_RATE_CHANGE
events.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20211011112719.3951784-13-claudiu.beznea@microchip.com
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
These are all "early clocks" that require initialization just at
of_clk_init() time. Use CLK_OF_DECLARE() to declare them.
This also fixes a problem that was spotted when fw_devlink was
set to 'on' by default: the boards failed to boot. The reason is
that CLK_OF_DECLARE_DRIVER() clears the OF_POPULATED and causes
the consumers of the clock to be postponed by fw_devlink until
the second initialization routine of the clock has been completed.
One of the consumers of the clock is the timer, which is used as a
clocksource, and needs the clock initialized early. Postponing the
timers caused the fail at boot.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20210203154332.470587-1-tudor.ambarus@microchip.com
Acked-by: Saravana Kannan <saravanak@google.com>
Tested-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Re-factor master clock driver by splitting it into 2 clocks: prescaller
and divider clocks. Based on registered clock flags the prescaler's rate
could be changed at runtime. This is necessary for platforms supporting
DVFS (e.g. SAMA7G5) where master clock could be changed at run-time.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1605800597-16720-11-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add mux table option. This is necessary for IP versions that has
gaps in the range of available clock sources (e.g. SAMA7G5).
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1595403506-8209-15-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
We need to have clocks accessible via phandle to select them
as peripheral clock parent using assigned-clock-parents in DT.
Add support for PLLACK/PLLBCK/AUDIOPLLCK clocks where available.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lkml.kernel.org/r/fa39cc10dab8341ea4bc2b7152be9217b2cd34a5.1588630999.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
This exposes PROGx clocks for use in assigned-clocks DeviceTree property
for selecting PCKx parent clock.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lkml.kernel.org/r/0054532c00163ddf405dad658b32f0d7d97fcc8e.1588630999.git.mirq-linux@rere.qmqm.pl
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Alloc whole data structure in one block. This makes the code shorter,
more efficient and easier to extend in following patch.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lkml.kernel.org/r/fc6f6d67b8cee0beace4a9d9cca7431e5efa769d.1588630999.git.mirq-linux@rere.qmqm.pl
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add a driver for the PMC clocks of the at91rm9200.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lkml.kernel.org/r/20200214145934.53648-1-alexandre.belloni@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
