summaryrefslogtreecommitdiff
path: root/drivers/bluetooth/btmtksdio.c
AgeCommit message (Collapse)Author
2024-07-15Bluetooth: btmtk: move btusb_mtk_hci_wmt_sync to btmtk.cChris Lu
Move btusb_mtk_hci_wmt_sync from btusb.c to btmtk.c which holds vendor specific stuff and would make btusb.c clean. Add usb.h header to btmtksdio.c/btmtkuart.c for usb related element defined in btmtk.h Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-07-14Bluetooth: btmtk: apply the common btmtk_fw_get_filenameSean Wang
Apply the common btmtk_fw_get_filename to avoid the similar coding in each driver. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-04-04Bluetooth: btmtksdio: drop driver owner initializationKrzysztof Kozlowski
Core in sdio_register_driver() already sets the .owner, so driver does not need to. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240403-module-owner-sdio-v2-2-ae46d6b955eb@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-10-23Bluetooth: btmtksdio: enable bluetooth wakeup in system suspendZhengping Jiang
The BTMTKSDIO_BT_WAKE_ENABLED flag is set for bluetooth interrupt during system suspend and increases wakeup count for bluetooth event. Signed-off-by: Zhengping Jiang <jiangzp@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-21Bluetooth: btmtksdio: Add in-band wakeup supportSean Wang
Commit ce64b3e94919 ("Bluetooth: mt7921s: Support wake on bluetooth") adds the wake on bluethooth via a dedicated GPIO. Extend the wake-on-bluetooth to use the SDIO DAT1 pin (in-band wakeup), when supported by the SDIO host driver. Co-developed-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-05-13Bluetooth: btmtksdio: fix the reset takes too longSean Wang
Sending WMT command during the reset in progress is invalid and would get no response from firmware until the reset is complete, so we ignore the WMT command here to resolve the issue which causes the whole reset process taking too long. Fixes: 8fafe702253d ("Bluetooth: mt7921s: support bluetooth reset mechanism") Co-developed-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-05-13Bluetooth: btmtksdio: fix possible FW initialization failureSean Wang
According to FW advised sequence, mt7921s need to re-acquire privilege immediately after the firmware download is complete before normal running. Otherwise, it is still possible the bus may be stuck in an abnormal status that causes FW initialization failure in the current driver. Fixes: 752aea58489f ("Bluetooth: mt7921s: fix bus hang with wrong privilege") Co-developed-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-05-13Bluetooth: btmtksdio: fix use-after-free at btmtksdio_recv_eventSean Wang
We should not access skb buffer data anymore after hci_recv_frame was called. [ 39.634809] BUG: KASAN: use-after-free in btmtksdio_recv_event+0x1b0 [ 39.634855] Read of size 1 at addr ffffff80cf28a60d by task kworker [ 39.634962] Call trace: [ 39.634974] dump_backtrace+0x0/0x3b8 [ 39.634999] show_stack+0x20/0x2c [ 39.635016] dump_stack_lvl+0x60/0x78 [ 39.635040] print_address_description+0x70/0x2f0 [ 39.635062] kasan_report+0x154/0x194 [ 39.635079] __asan_report_load1_noabort+0x44/0x50 [ 39.635099] btmtksdio_recv_event+0x1b0/0x1c4 [ 39.635129] btmtksdio_txrx_work+0x6cc/0xac4 [ 39.635157] process_one_work+0x560/0xc5c [ 39.635177] worker_thread+0x7ec/0xcc0 [ 39.635195] kthread+0x2d0/0x3d0 [ 39.635215] ret_from_fork+0x10/0x20 [ 39.635247] Allocated by task 0: [ 39.635260] (stack is not available) [ 39.635281] Freed by task 2392: [ 39.635295] kasan_save_stack+0x38/0x68 [ 39.635319] kasan_set_track+0x28/0x3c [ 39.635338] kasan_set_free_info+0x28/0x4c [ 39.635357] ____kasan_slab_free+0x104/0x150 [ 39.635374] __kasan_slab_free+0x18/0x28 [ 39.635391] slab_free_freelist_hook+0x114/0x248 [ 39.635410] kfree+0xf8/0x2b4 [ 39.635427] skb_free_head+0x58/0x98 [ 39.635447] skb_release_data+0x2f4/0x410 [ 39.635464] skb_release_all+0x50/0x60 [ 39.635481] kfree_skb+0xc8/0x25c [ 39.635498] hci_event_packet+0x894/0xca4 [bluetooth] [ 39.635721] hci_rx_work+0x1c8/0x68c [bluetooth] [ 39.635925] process_one_work+0x560/0xc5c [ 39.635951] worker_thread+0x7ec/0xcc0 [ 39.635970] kthread+0x2d0/0x3d0 [ 39.635990] ret_from_fork+0x10/0x20 [ 39.636021] The buggy address belongs to the object at ffffff80cf28a600 which belongs to the cache kmalloc-512 of size 512 [ 39.636039] The buggy address is located 13 bytes inside of 512-byte region [ffffff80cf28a600, ffffff80cf28a800) Fixes: 9aebfd4a2200 ("Bluetooth: mediatek: add support for MediaTek MT7663S and MT7668S SDIO devices") Co-developed-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-05-13Bluetooth: mt7921s: Fix the incorrect pointer checkSean Wang
Fix the incorrect pointer check on ven_data. Fixes: f41b91fa1783 ("Bluetooth: mt7921s: Add .btmtk_get_codec_config_data") Co-developed-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: mt7921s: Add WBS supportYake Yang
It is time to add wide band speech (WBS) support. Reviewed-by: Mark Chen <markyawenchen@gmail.com> Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: mt7921s: Add .btmtk_get_codec_config_dataYake Yang
add .btmtk_get_codec_config_data to get codec configuration data. In HFP offload usecase, controllers need to be set codec details before opening SCO. This callback function is used to fetch vendor specific codec config data. This is a preliminary patch to add the WBS support to the MT7921 driver. Reviewed-by: Mark Chen <markyawenchen@gmail.com> Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: mt7921s: Add .get_data_path_idYake Yang
Add .get_data_path_id to fetch data_path_id for MT7921 to support HFP offload use case. This is a preliminary patch to add the WBS support to the MT7921 driver. Reviewed-by: Mark Chen <markyawenchen@gmail.com> Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: mt7921s: Set HCI_QUIRK_VALID_LE_STATESYake Yang
The patch set HCI_QUIRK_VALID_LE_STATES to be consistent with the btusb for MT7921 and is required for the likes of experimental LE simultaneous roles. Reviewed-by: Mark Chen <markyawenchen@gmail.com> Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-18Bluetooth: btmtksdio: Fix kernel oops in btmtksdio_interruptYake Yang
Fix the following kernel oops in btmtksdio_interrrupt [ 14.339134] btmtksdio_interrupt+0x28/0x54 [ 14.339139] process_sdio_pending_irqs+0x68/0x1a0 [ 14.339144] sdio_irq_work+0x40/0x70 [ 14.339154] process_one_work+0x184/0x39c [ 14.339160] worker_thread+0x228/0x3e8 [ 14.339168] kthread+0x148/0x3ac [ 14.339176] ret_from_fork+0x10/0x30 That happened because hdev->power_on is already called before sdio_set_drvdata which btmtksdio_interrupt handler relies on is not properly set up. The details are shown as the below: hci_register_dev would run queue_work(hdev->req_workqueue, &hdev->power_on) as WQ_HIGHPRI workqueue_struct to complete the power-on sequeunce and thus hci_power_on may run before sdio_set_drvdata is done in btmtksdio_probe. The hci_dev_do_open in hci_power_on would initialize the device and enable the interrupt and thus it is possible that btmtksdio_interrupt is being called right before sdio_set_drvdata is filled out. When btmtksdio_interrupt is being called and sdio_set_drvdata is not filled , the kernel oops is going to happen because btmtksdio_interrupt access an uninitialized pointer. Fixes: 9aebfd4a2200 ("Bluetooth: mediatek: add support for MediaTek MT7663S and MT7668S SDIO devices") Reviewed-by: Mark Chen <markyawenchen@gmail.com> Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-04Bluetooth: btmtksdio: Fix kernel oops when sdio suspend.Yake Yang
Do not kfree the skb when the skb failed to send with __hci_cmd_sync 2435.241210] Call trace: [ 2435.241224] kfree_skb+0x20/0x140 [ 2435.241240] btmtksdio_sdio_wakeup+0x8c/0xcc [ 2435.241360] hci_suspend_notifier+0x108/0x184 [ 2435.241377] notifier_call_chain_robust+0x58/0xd8 [ 2435.241390] blocking_notifier_call_chain_robust+0x54/0x84 [ 2435.241402] pm_notifier_call_chain_robust+0x2c/0x4c [ 2435.241414] suspend_prepare+0x40/0x238 [ 2435.241425] enter_state+0xec/0x3a8 [ 2435.241436] pm_suspend+0x60/0xcc [ 2435.241446] state_store+0xb8/0x114 [ 2435.241460] kobj_attr_store+0x18/0x2c [ 2435.241473] sysfs_kf_write+0x44/0x58 [ 2435.241486] kernfs_fop_write_iter+0xf4/0x190 [ 2435.241500] vfs_write+0x2b0/0x2e4 [ 2435.241511] ksys_write+0x80/0xec [ 2435.241523] __arm64_sys_write+0x24/0x30 [ 2435.241538] el0_svc_common+0xf0/0x1d8 [ 2435.241550] do_el0_svc_compat+0x28/0x54 [ 2435.241564] el0_svc_compat+0x10/0x1c [ 2435.241574] el0_sync_compat_handler+0xa8/0xcc [ 2435.241586] el0_sync_compat+0x188/0x1c0 [ 2435.241606] Code: a9014ff4 910003fd b40002c0 aa0003f3 (b84d4c08) [ 2435.241619] ---[ end trace d496539b850baf14 ]--- Fixes: ce64b3e94919 ("Bluetooth: mt7921s: Support wake on bluetooth") Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-04Bluetooth: mediatek: fix the conflict between mtk and msft vendor eventSean Wang
There is a conflict between MediaTek wmt event and msft vendor extension logic in the core layer since 145373cb1b1f ("Bluetooth: Add framework for Microsoft vendor extension") was introduced because we changed the type of mediatek wmt event to the type of msft vendor event in the driver. But the purpose we reported mediatek event to the core layer is for the diagnostic purpose with that we are able to see the full packet trace via monitoring socket with btmon. Thus, it is harmless we keep the original type of mediatek vendor event here to avoid breaking the msft extension function especially they can be supported by Mediatek chipset like MT7921 , MT7922 devices and future devices. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-03-04Bluetooth: mt7921s: support bluetooth reset mechanismChih-Ying Chiang
Implement .cmd_timeout to reset the MT7921s device via a dedicated GPIO pin when the firmware hang or the command has no response. Co-developed-by: Mark Chen <mark-yw.chen@mediatek.com> Signed-off-by: Mark Chen <mark-yw.chen@mediatek.com> Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Chih-Ying Chiang <chih-yin.chiang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-21Bluetooth: btmtksdio: mask out interrupt statusSean Wang
Currently, there is a loop in btmtksdio_txrx_work() which iteratively executes until the variable int_status is zero. But the variable int_status should be masked out with the actual interrupt sources (MTK_REG_CHISR bit 0-15) before we check the loop condition. Otherwise, RX_PKT_LEN (MTK_REG_CHISR bit 16-31) which is read-only and unclearable would cause the loop to get stuck on some chipsets like MT7663s. Fixes: 26270bc189ea ("Bluetooth: btmtksdio: move interrupt service to work") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-21Bluetooth: btmtksdio: run sleep mode by defaultSean Wang
Apply sleep mode by default and a smaller idle time to reduce power consumption further. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-21Bluetooth: btmtksdio: lower log level in btmtksdio_runtime_[resume|suspend]()Sean Wang
Lower its log level from INFO to DEBUG prior to we enable runtime pm for mt7921s with the smaller idle time as default. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-21Bluetooth: mt7921s: fix btmtksdio_[drv|fw]_pmctrl()Mark Chen
According to the firmware behavior (even the oldest one in linux-firmware) If the firmware is downloaded, MT7921S must rely on the additional mailbox mechanism that resides in firmware to check if the device is the right state for btmtksdio_mcu_[drv|fw]_pmctrl(). Otherwise, we still apply the old way for that. That is a necessary patch before we enable runtime pm for mt7921s as default. Fixes: c603bf1f94d0 ("Bluetooth: btmtksdio: add MT7921s Bluetooth support") Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Mark Chen <mark-yw.chen@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-21Bluetooth: mt7921s: fix bus hang with wrong privilegeMark Chen
According to chip hw flow, mt7921s need to re-acquire privilege again before normal running. Otherwise, the bus may be stuck in an abnormal status. Fixes: c603bf1f94d0 ("Bluetooth: btmtksdio: add MT7921s Bluetooth support") Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Mark Chen <mark-yw.chen@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-21Bluetooth: btmtksdio: refactor btmtksdio_runtime_[suspend|resume]()Mark Chen
Refactor btmtksdio_runtime_[suspend|resume]() to create the common funcitons btmtksdio_[fw|drv]_pmctrl() shared with btmtksdio_[open|close]() to avoid the redundant code as well. This is also a prerequisite patch for the incoming patches. Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Mark Chen <mark-yw.chen@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-21Bluetooth: mt7921s: fix firmware coredump retrieveMark Chen
According to the MCU firmware behavior, as the driver is aware of the notification of the interrupt source FW_MAILBOX_INT that shows the MCU completed delivered a core dump piece to the host, the driver must acknowledge the MCU with the register PH2DSM0R bit PH2DSM0R_DRIVER_OWN to notify the MCU to handle the next core dump piece. Fixes: db57b625912a ("Bluetooth: btmtksdio: add support of processing firmware coredump and log") Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Mark Chen <mark-yw.chen@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-10Bluetooth: btmtksdio: clean up inconsistent error message in ↵Sean Wang
btmtksdio_mtk_reg_read Have "..reg (%d)" to be consistent with the other similar error messages. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-10Bluetooth: btmtksdio: move struct reg_read_cmd to common fileSean Wang
move struct reg_read_cmd to btmtk.h to allow other mtk drivers refer to. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-10Bluetooth: mt7921s: Enable SCO over I2SMark Chen
The driver has to issue the specific command to enable Bluetooth SCO over the I2S/PCM interface on mt7921s, that is supported since the firmware with version 20211222191101 was added, and the patch would not cause any harm even when the old firmware is applied. The SCO profile with the patch was tested by setting up a VOIP application, connected to HFP device, checked telephony function can work normally. Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Mark Chen <mark-yw.chen@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-10Bluetooth: mt7921s: Support wake on bluetoothMark Chen
Enable wake on bluetooth on mt7921s that can be supported since the firmware with version 20211129211059 was added, and the patch would not cause any harm even when the old firmware is applied. The patch was tested by setting up an HID or HOGP profile to connect a Bluetooth keyboard and mouse, then putting the system to suspend, then trying to wake up the system by moving the Bluetooth keyboard or mouse, and then checking if the system can wake up and be brought back to the normal state. Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Mark Chen <mark-yw.chen@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-01-10Bluetooth: btmtksdio: rename btsdio_mtk_reg_readSean Wang
Using "btmtksdio" as the prefix instead of "btsdio" Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-07Bluetooth: btmtksdio: enable AOSP extension for MT7921Sean Wang
Similar to MT7921 btusb, we enable AOSP extension for MT7921 btmtksdio as well. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-07Bluetooth: btmtksdio: enable msft opcodeŁukasz Bartosik
Enable msft opcode for mt7921 chip. Signed-off-by: Łukasz Bartosik <lb@semihalf.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-03Bluetooth: btmtksdio: fix resume failureSean Wang
btmtksdio have to rely on MMC_PM_KEEP_POWER in pm_flags to avoid that SDIO power is being shut off during the device is in suspend. That fixes the SDIO command fails to access the bus after the device is resumed. Fixes: 7f3c563c575e7 ("Bluetooth: btmtksdio: Add runtime PM support to SDIO based Bluetooth") Co-developed-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-12-03Bluetooth: btmtksdio: handle runtime pm only when sdio_func is availableSean Wang
Runtime pm ops is not aware the sdio_func status that is probably being disabled by btmtksdio_close. Thus, we are only able to access the sdio_func for the runtime pm operations only when the sdio_func is available. Fixes: 7f3c563c575e7 ("Bluetooth: btmtksdio: Add runtime PM support to SDIO based Bluetooth") Co-developed-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-11-24Bluetooth: btmtksdio: drop the unnecessary variable createdSean Wang
Use the existent variable to drop the unnecessary variable created. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-11-24Bluetooth: btmtksdio: add support of processing firmware coredump and logSean Wang
Add support of processing the firmware coredump and log for the diagnostic purpose. Co-developed-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-25Bluetooth: btmtksdio: add MT7921s Bluetooth supportSean Wang
add MT7921s Bluetooth support Co-developed-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-25Bluetooth: btmtksdio: transmit packet according to status TX_EMPTYMark-yw Chen
Each packet should be sent out until the device emits the TX_EMPTY signal to the host, that is firmware people suggested to add to meet the actual firmware behavior and that is compatible among all the devices. Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-25Bluetooth: btmtksdio: use register CRPLR to read packet lengthSean Wang
That is a preliminary patch to introduce mt7921s support. Use the register CRPLR to read packet length to make all the devices share the common logic. Co-developed-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-25Bluetooth: btmtksdio: update register CSDIOCSR operationSean Wang
That is a preliminary patch to introduce mt7921s support. Update register CSDIOCSR operation that is suggested from the vendor driver and is compatible to the all devices. Co-developed-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-25Bluetooth: btmtksdio: move interrupt service to workSean Wang
btmtksdio belongs to WIFI/BT combo chip that would serve two radios in one sdio_irq so that we have to move interrupt service to worker to ensure ISR as short as possible. The worker would serve the both Tx and Rx in a batch to effectively reduce many interrupts to the host and to avoid excessive sdio lock contention between various context (even from WiFi driver) and help to be more efficient to complete command/event transation. Co-developed-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-25Bluetooth: btmtksdio: explicitly set WHISR as write-1-clearSean Wang
That is a preliminary patch to introduce mt7921s support. Explicitly set WHISR as write-1-clear method to all devices that is the expected behavior the driver rely on. Co-developed-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Mark-yw Chen <mark-yw.chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-25Bluetooth: btmtksdio: add .set_bdaddr supportSean Wang
add .set_bdaddr support Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-10-25Bluetooth: btmtksido: rely on BT_MTK moduleSean Wang
Rely on btmtk module to reduce duplicated code Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-12-18Bluetooth: btmtksdio: Fixed switch and case should be at the same indentJagdish Tirumala
Switch and case where not properly aligned Signed-off-by: Jagdish Tirumala <t.jag587@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-12-07Bluetooth: btmtksdio: Add the missed release_firmware() in mtk_setup_firmware()Jing Xiangfeng
mtk_setup_firmware() misses to call release_firmware() in an error path. Jump to free_fw to fix it. Fixes: 737cd06072a7 ("Bluetooth: btmtksdio: fix up firmware download sequence") Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-09-11Bluetooth: btmtksdio: use NULL instead of zeroYueHaibing
Fix sparse warnings: drivers/bluetooth/btmtksdio.c:499:57: warning: Using plain integer as NULL pointer drivers/bluetooth/btmtksdio.c:533:57: warning: Using plain integer as NULL pointer Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-31Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2020-07-31 Here's the main bluetooth-next pull request for 5.9: - Fix firmware filenames for Marvell chipsets - Several suspend-related fixes - Addedd mgmt commands for runtime configuration - Multiple fixes for Qualcomm-based controllers - Add new monitoring feature for mgmt - Fix handling of legacy cipher (E4) together with security level 4 - Add support for Realtek 8822CE controller - Fix issues with Chinese controllers using fake VID/PID values - Multiple other smaller fixes & improvements ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-23Bluetooth: btmtksdio: fix up firmware download sequenceSean Wang
Data RAM on the device have to be powered on before starting to download the firmware. Fixes: 9aebfd4a2200 ("Bluetooth: mediatek: add support for MediaTek MT7663S and MT7668S SDIO devices") Co-developed-by: Mark Chen <Mark-YW.Chen@mediatek.com> Signed-off-by: Mark Chen <Mark-YW.Chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-29mmc: sdio: Move SDIO IDs from btmtksdio driver to common include filePali Rohár
Define appropriate macro names for consistency with other macros. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20200522144412.19712-6-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
2019-11-07Bluetooth: btmtksdio: add MODULE_DEVICE_TABLE()Bartosz Golaszewski
This adds the missing MODULE_DEVICE_TABLE() for SDIO IDs. While certain platforms using this driver indeed have HW issues causing problems if the module is loaded too early - this should be handled from user-space by blacklisting it or delaying the loading. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-11-21 21:12:57 +0000