| Age | Commit message (Collapse) | Author |
|---|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/pensando/ionic/ionic_txrx.c
d9c04209990b ("ionic: Mark error paths in the data path as unlikely")
491aee894a08 ("ionic: fix kernel panic in XDP_TX action")
net/ipv6/ip6_fib.c
b4cb4a1391dc ("net: use unrcu_pointer() helper")
b01e1c030770 ("ipv6: fix possible race in __fib6_drop_pcpu_from()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/ti/icssg/icssg_classifier.c
abd5576b9c57 ("net: ti: icssg-prueth: Add support for ICSSG switch firmware")
56a5cf538c3f ("net: ti: icssg-prueth: Fix start counter for ft1 filter")
https://lore.kernel.org/all/20240531123822.3bb7eadf@canb.auug.org.au/
No other adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
HAVE_ARCH_HUGE_VMAP also works on XIP kernel, so remove its dependency on
!XIP_KERNEL.
This also fixes a boot problem for XIP kernel introduced by the commit in
"Fixes:". This commit used huge page mapping for vmemmap, but huge page
vmap was not enabled for XIP kernel.
Fixes: ff172d4818ad ("riscv: Use hugepage mappings for vmemmap")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: <stable@vger.kernel.org>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240526110104.470429-1-namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-05-28
We've added 23 non-merge commits during the last 11 day(s) which contain
a total of 45 files changed, 696 insertions(+), 277 deletions(-).
The main changes are:
1) Rename skb's mono_delivery_time to tstamp_type for extensibility
and add SKB_CLOCK_TAI type support to bpf_skb_set_tstamp(),
from Abhishek Chauhan.
2) Add netfilter CT zone ID and direction to bpf_ct_opts so that arbitrary
CT zones can be used from XDP/tc BPF netfilter CT helper functions,
from Brad Cowie.
3) Several tweaks to the instruction-set.rst IETF doc to address
the Last Call review comments, from Dave Thaler.
4) Small batch of riscv64 BPF JIT optimizations in order to emit more
compressed instructions to the JITed image for better icache efficiency,
from Xiao Wang.
5) Sort bpftool C dump output from BTF, aiming to simplify vmlinux.h
diffing and forcing more natural type definitions ordering,
from Mykyta Yatsenko.
6) Use DEV_STATS_INC() macro in BPF redirect helpers to silence
a syzbot/KCSAN race report for the tx_errors counter,
from Jiang Yunshui.
7) Un-constify bpf_func_info in bpftool to fix compilation with LLVM 17+
which started treating const structs as constants and thus breaking
full BTF program name resolution, from Ivan Babrou.
8) Fix up BPF program numbers in test_sockmap selftest in order to reduce
some of the test-internal array sizes, from Geliang Tang.
9) Small cleanup in Makefile.btf script to use test-ge check for v1.25-only
pahole, from Alan Maguire.
10) Fix bpftool's make dependencies for vmlinux.h in order to avoid needless
rebuilds in some corner cases, from Artem Savkov.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (23 commits)
bpf, net: Use DEV_STAT_INC()
bpf, docs: Fix instruction.rst indentation
bpf, docs: Clarify call local offset
bpf, docs: Add table captions
bpf, docs: clarify sign extension of 64-bit use of 32-bit imm
bpf, docs: Use RFC 2119 language for ISA requirements
bpf, docs: Move sentence about returning R0 to abi.rst
bpf: constify member bpf_sysctl_kern:: Table
riscv, bpf: Try RVC for reg move within BPF_CMPXCHG JIT
riscv, bpf: Use STACK_ALIGN macro for size rounding up
riscv, bpf: Optimize zextw insn with Zba extension
selftests/bpf: Handle forwarding of UDP CLOCK_TAI packets
net: Add additional bit to support clockid_t timestamp type
net: Rename mono_delivery_time to tstamp_type for scalabilty
selftests/bpf: Update tests for new ct zone opts for nf_conntrack kfuncs
net: netfilter: Make ct zone opts configurable for bpf ct helpers
selftests/bpf: Fix prog numbers in test_sockmap
bpf: Remove unused variable "prev_state"
bpftool: Un-const bpf_func_info to fix it for llvm 17 and newer
bpf: Fix order of args in call to bpf_map_kvcalloc
...
====================
Link: https://lore.kernel.org/r/20240528105924.30905-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- The compression format used for boot images is now configurable at
build time, and these formats are shown in `make help`
- access_ok() has been optimized
- A pair of performance bugs have been fixed in the uaccess handlers
- Various fixes and cleanups, including one for the IMSIC build failure
and one for the early-boot ftrace illegal NOPs bug
* tag 'riscv-for-linus-6.10-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix early ftrace nop patching
irqchip: riscv-imsic: Fixup riscv_ipi_set_virq_range() conflict
riscv: selftests: Add signal handling vector tests
riscv: mm: accelerate pagefault when badaccess
riscv: uaccess: Relax the threshold for fast path
riscv: uaccess: Allow the last potential unrolled copy
riscv: typo in comment for get_f64_reg
Use bool value in set_cpu_online()
riscv: selftests: Add hwprobe binaries to .gitignore
riscv: stacktrace: fixed walk_stackframe()
ftrace: riscv: move from REGS to ARGS
riscv: do not select MODULE_SECTIONS by default
riscv: show help string for riscv-specific targets
riscv: make image compression configurable
riscv: cpufeature: Fix extension subset checking
riscv: cpufeature: Fix thead vector hwcap removal
riscv: rewrite __kernel_map_pages() to fix sleeping in invalid context
riscv: force PAGE_SIZE linear mapping if debug_pagealloc is enabled
riscv: Define TASK_SIZE_MAX for __access_ok()
riscv: Remove PGDIR_SIZE_L3 and TASK_SIZE_MIN
|
|
The Zba extension provides add.uw insn which can be used to implement
zext.w with rs2 set as ZERO.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Pu Lehui <pulehui@huawei.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/bpf/20240516090430.493122-1-xiao.w.wang@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more non-mm updates from Andrew Morton:
- A series ("kbuild: enable more warnings by default") from Arnd
Bergmann which enables a number of additional build-time warnings. We
fixed all the fallout which we could find, there may still be a few
stragglers.
- Samuel Holland has developed the series "Unified cross-architecture
kernel-mode FPU API". This does a lot of consolidation of
per-architecture kernel-mode FPU usage and enables the use of newer
AMD GPUs on RISC-V.
- Tao Su has fixed some selftests build warnings in the series
"Selftests: Fix compilation warnings due to missing _GNU_SOURCE
definition".
- This pull also includes a nilfs2 fixup from Ryusuke Konishi.
* tag 'mm-nonmm-stable-2024-05-22-17-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (23 commits)
nilfs2: make block erasure safe in nilfs_finish_roll_forward()
selftests/harness: use 1024 in place of LINE_MAX
Revert "selftests/harness: remove use of LINE_MAX"
selftests/fpu: allow building on other architectures
selftests/fpu: move FP code to a separate translation unit
drm/amd/display: use ARCH_HAS_KERNEL_FPU_SUPPORT
drm/amd/display: only use hard-float, not altivec on powerpc
riscv: add support for kernel-mode FPU
x86: implement ARCH_HAS_KERNEL_FPU_SUPPORT
powerpc: implement ARCH_HAS_KERNEL_FPU_SUPPORT
LoongArch: implement ARCH_HAS_KERNEL_FPU_SUPPORT
lib/raid6: use CC_FLAGS_FPU for NEON CFLAGS
arm64: crypto: use CC_FLAGS_FPU for NEON CFLAGS
arm64: implement ARCH_HAS_KERNEL_FPU_SUPPORT
ARM: crypto: use CC_FLAGS_FPU for NEON CFLAGS
ARM: implement ARCH_HAS_KERNEL_FPU_SUPPORT
arch: add ARCH_HAS_KERNEL_FPU_SUPPORT
x86/fpu: fix asm/fpu/types.h include guard
kbuild: enable -Wcast-function-type-strict unconditionally
kbuild: enable -Wformat-truncation on clang
...
|
|
This commit replaces riscv's support for FTRACE_WITH_REGS with support
for FTRACE_WITH_ARGS. This is required for the ongoing effort to stop
relying on stop_machine() for RISCV's implementation of ftrace.
The main relevant benefit that this change will bring for the above
use-case is that now we don't have separate ftrace_caller and
ftrace_regs_caller trampolines. This will allow the callsite to call
ftrace_caller by modifying a single instruction. Now the callsite can
do something similar to:
When not tracing: | When tracing:
func: func:
auipc t0, ftrace_caller_top auipc t0, ftrace_caller_top
nop <=========<Enable/Disable>=========> jalr t0, ftrace_caller_bottom
[...] [...]
The above assumes that we are dropping the support of calling a direct
trampoline from the callsite. We need to drop this as the callsite can't
change the target address to call, it can only enable/disable a call to
a preset target (ftrace_caller in the above diagram). We can later optimize
this by calling an intermediate dispatcher trampoline before ftrace_caller.
Currently, ftrace_regs_caller saves all CPU registers in the format of
struct pt_regs and allows the tracer to modify them. We don't need to
save all of the CPU registers because at function entry only a subset of
pt_regs is live:
|----------+----------+---------------------------------------------|
| Register | ABI Name | Description |
|----------+----------+---------------------------------------------|
| x1 | ra | Return address for traced function |
| x2 | sp | Stack pointer |
| x5 | t0 | Return address for ftrace_caller trampoline |
| x8 | s0/fp | Frame pointer |
| x10-11 | a0-1 | Function arguments/return values |
| x12-17 | a2-7 | Function arguments |
|----------+----------+---------------------------------------------|
See RISCV calling convention[1] for the above table.
Saving just the live registers decreases the amount of stack space
required from 288 Bytes to 112 Bytes.
Basic testing was done with this on the VisionFive 2 development board.
Note:
- Moving from REGS to ARGS will mean that RISCV will stop supporting
KPROBES_ON_FTRACE as it requires full pt_regs to be saved.
- KPROBES_ON_FTRACE will be supplanted by FPROBES see [2].
[1] https://riscv.org/wp-content/uploads/2015/01/riscv-calling.pdf
[2] https://lore.kernel.org/all/170887410337.564249.6360118840946697039.stgit@devnote2/
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20240405142453.4187-1-puranjay@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Since commit aad15bc85c18 ("riscv: Change code model of module to
medany to improve data accessing"), kernel modules have not been built
with -fPIC, so they wouldn't have R_RISCV_GOT_HI20 or R_RISCV_CALL_PLT
relocations, and handling of those relocations is unnecessary.
If RELOCATABLE=y, kernel modules will be built with -fPIE, which would
reintroduce said relocations, so only select MODULE_SECTIONS when
RELOCATABLE.
Signed-off-by: Qingfang Deng <qingfang.deng@siflower.com.cn>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240511015725.1162-1-dqfext@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Previously the build process would always set KBUILD_IMAGE to the
uncompressed Image file (unless XIP_KERNEL or EFI_ZBOOT was enabled) and
unconditionally compress it into Image.gz. However there are already
build targets for Image.bz2, Image.lz4, Image.lzma, Image.lzo and
Image.zstd, so let's make use of those, make the compression method
configurable and set KBUILD_IMAGE accordingly so that targets like
'make install' and 'make bindeb-pkg' will use the chosen image.
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240504193446.196886-2-emil.renner.berthing@canonical.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Add byte/half-word compare-and-exchange, emulated via LR/SC loops
- Support for Rust
- Support for Zihintpause in hwprobe
- Add PR_RISCV_SET_ICACHE_FLUSH_CTX prctl()
- Support lockless lockrefs
* tag 'riscv-for-linus-6.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
riscv: defconfig: Enable CONFIG_CLK_SOPHGO_CV1800
riscv: select ARCH_HAS_FAST_MULTIPLIER
riscv: mm: still create swiotlb buffer for kmalloc() bouncing if required
riscv: Annotate pgtable_l{4,5}_enabled with __ro_after_init
riscv: Remove redundant CONFIG_64BIT from pgtable_l{4,5}_enabled
riscv: mm: Always use an ASID to flush mm contexts
riscv: mm: Preserve global TLB entries when switching contexts
riscv: mm: Make asid_bits a local variable
riscv: mm: Use a fixed layout for the MM context ID
riscv: mm: Introduce cntx2asid/cntx2version helper macros
riscv: Avoid TLB flush loops when affected by SiFive CIP-1200
riscv: Apply SiFive CIP-1200 workaround to single-ASID sfence.vma
riscv: mm: Combine the SMP and UP TLB flush code
riscv: Only send remote fences when some other CPU is online
riscv: mm: Broadcast kernel TLB flushes only when needed
riscv: Use IPIs for remote cache/TLB flushes by default
riscv: Factor out page table TLB synchronization
riscv: Flush the instruction cache during SMP bringup
riscv: hwprobe: export Zihintpause ISA extension
riscv: misaligned: remove CONFIG_RISCV_M_MODE specific code
...
|
|
This is motivated by the amdgpu DRM driver, which needs floating-point
code to support recent hardware. That code is not performance-critical,
so only provide a minimal non-preemptible implementation for now.
Support is limited to riscv64 because riscv32 requires runtime (libgcc)
assistance to convert between doubles and 64-bit integers.
Link: https://lkml.kernel.org/r/20240329072441.591471-12-samuel.holland@sifive.com
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: WANG Xuerui <git@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
"The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs.
Notable series include:
- Lucas Stach has provided some page-mapping cleanup/consolidation/
maintainability work in the series "mm/treewide: Remove pXd_huge()
API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
one test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being
allocated: number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in
largely similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene"
Johannes Weiner has fixed the page allocator's handling of
migratetype requests, with resulting improvements in compaction
efficiency.
- In the series "make the hugetlb migration strategy consistent"
Baolin Wang has fixed a hugetlb migration issue, which should
improve hugetlb allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when
memory almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting"
Kairui Song has optimized pagecache insertion, yielding ~10%
performance improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various
page->flags cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series:
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert
hugetlb functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
series "mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs.
This is a simple first-cut implementation for now. The series is
"support multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in
the series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts
in the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call
it GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
path to use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes".
Fixes the initialization code so that migration between different
memory types works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant
driver in the series "mm: follow_pte() improvements and acrn
follow_pte() fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to
folio in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size
THP's in the series "mm: add per-order mTHP alloc and swpout
counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap
same-filled and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His
series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
optimizes the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback
instrumentation in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series
"Fix and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
the series "Improve anon_vma scalability for anon VMAs". Intel's
test bot reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as
XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking""
* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
selftests: cgroup: add tests to verify the zswap writeback path
mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
mm/damon/core: fix return value from damos_wmark_metric_value
mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
selftests: cgroup: remove redundant enabling of memory controller
Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
Docs/mm/damon/design: use a list for supported filters
Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
selftests/damon: classify tests for functionalities and regressions
selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
selftests/damon: add a test for DAMOS quota goal
...
|
|
Samuel Holland <samuel.holland@sifive.com> says:
This series converts uniprocessor kernel builds to use the same TLB
flushing code as SMP builds, to take advantage of batching and existing
range- and ASID-based TLB flush optimizations. It optimizes out IPIs and
SBI calls based on the online CPU count, which also covers the scenario
where SMP was enabled at build time but only one CPU is present/online.
A final optimization is to use single-ASID flushes wherever possible, to
avoid unnecessary TLB misses for kernel mappings.
This series has a semantic conflict with the AIA patches that are in
linux-next due to the removal of the third parameter of
riscv_ipi_set_virq_range(), which is called from imsic_ipi_domain_init()
in drivers/irqchip/irq-riscv-imsic-early.c. The resolution is to remove
the extra argument from the call site.
Here are some numbers from D1 which show the performance impact:
v6.9-rc1:
System Benchmarks Partial Index BASELINE RESULT INDEX
Execl Throughput 43.0 198.5 46.2
File Copy 1024 bufsize 2000 maxblocks 3960.0 73934.4 186.7
File Copy 256 bufsize 500 maxblocks 1655.0 20242.6 122.3
File Copy 4096 bufsize 8000 maxblocks 5800.0 197706.4 340.9
Pipe Throughput 12440.0 176974.2 142.3
Pipe-based Context Switching 4000.0 23626.8 59.1
Process Creation 126.0 449.9 35.7
Shell Scripts (1 concurrent) 42.4 544.4 128.4
Shell Scripts (16 concurrent) --- 35.3 ---
Shell Scripts (8 concurrent) 6.0 71.6 119.3
System Call Overhead 15000.0 248072.6 165.4
========
System Benchmarks Index Score (Partial Only) 110.6
v6.9-rc1 + this patch series:
System Benchmarks Partial Index BASELINE RESULT INDEX
Execl Throughput 43.0 196.8 45.8
File Copy 1024 bufsize 2000 maxblocks 3960.0 71782.2 181.3
File Copy 256 bufsize 500 maxblocks 1655.0 21269.4 128.5
File Copy 4096 bufsize 8000 maxblocks 5800.0 199424.0 343.8
Pipe Throughput 12440.0 196468.6 157.9
Pipe-based Context Switching 4000.0 24261.8 60.7
Process Creation 126.0 459.0 36.4
Shell Scripts (1 concurrent) 42.4 543.8 128.2
Shell Scripts (16 concurrent) --- 35.5 ---
Shell Scripts (8 concurrent) 6.0 71.7 119.6
System Call Overhead 15000.0 259415.2 172.9
========
System Benchmarks Index Score (Partial Only) 113.0
* b4-shazam-lts:
riscv: mm: Always use an ASID to flush mm contexts
riscv: mm: Preserve global TLB entries when switching contexts
riscv: mm: Make asid_bits a local variable
riscv: mm: Use a fixed layout for the MM context ID
riscv: mm: Introduce cntx2asid/cntx2version helper macros
riscv: Avoid TLB flush loops when affected by SiFive CIP-1200
riscv: Apply SiFive CIP-1200 workaround to single-ASID sfence.vma
riscv: mm: Combine the SMP and UP TLB flush code
riscv: Only send remote fences when some other CPU is online
riscv: mm: Broadcast kernel TLB flushes only when needed
riscv: Use IPIs for remote cache/TLB flushes by default
riscv: Factor out page table TLB synchronization
riscv: Flush the instruction cache during SMP bringup
Link: https://lore.kernel.org/r/20240327045035.368512-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Currently, riscv linux requires at least IMA, so all platforms have a
multiplier. And I assume the 'mul' efficiency is comparable or better
than a sequence of five or so register-dependent arithmetic
instructions. Select ARCH_HAS_FAST_MULTIPLIER to get slightly nicer
codegen. Refer to commit f9b4192923fa ("[PATCH] bitops: hweight()
speedup") for more details.
In a simple benchmark test calling hweight64() in a loop, it got:
about 14% performance improvement on JH7110, tested on Milkv Mars.
about 23% performance improvement on TH1520 and SG2042, tested on
Sipeed LPI4A and SG2042 platform.
a slight performance drop on CV1800B, tested on milkv duo. Among all
riscv platforms in my hands, this is the only one which sees a slight
performance drop. It means the 'mul' isn't quick enough. However, the
situation exists on x86 too, for example, P4 doesn't have fast
integer multiplies as said in the above commit, x86 also selects
ARCH_HAS_FAST_MULTIPLIER. So let's select ARCH_HAS_FAST_MULTIPLIER
which can benefit almost riscv platforms.
Samuel also provided some performance numbers:
On Unmatched: 20% speedup for __sw_hweight32 and 30% speedup for
__sw_hweight64.
On D1: 8% speedup for __sw_hweight32 and 8% slowdown for
__sw_hweight64.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240325105823.1483-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Jisheng Zhang <jszhang@kernel.org> says:
This series selects ARCH_USE_CMPXCHG_LOCKREF to enable the
cmpxchg-based lockless lockref implementation for riscv. Then,
implement arch_cmpxchg64_{relaxed|acquire|release}.
After patch1:
Using Linus' test case[1] on TH1520 platform, I see a 11.2% improvement.
On JH7110 platform, I see 12.0% improvement.
After patch2:
on both TH1520 and JH7110 platforms, I didn't see obvious
performance improvement with Linus' test case [1]. IMHO, this may
be related with the fence and lr.d/sc.d hw implementations. In theory,
lr/sc without fence could give performance improvement over lr/sc plus
fence, so add the code here to leave performance improvement room on
newer HW platforms.
* b4-shazam-merge:
riscv: cmpxchg: implement arch_cmpxchg64_{relaxed|acquire|release}
riscv: select ARCH_USE_CMPXCHG_LOCKREF
Link: http://marc.info/?l=linux-fsdevel&m=137782380714721&w=4 [1]
Link: https://lore.kernel.org/r/20240325111038.1700-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
In SMP configurations, all TLB flushing narrower than flush_tlb_all()
goes through __flush_tlb_range(). Do the same in UP configurations.
This allows UP configurations to take advantage of recent improvements
to the code in tlbflush.c, such as support for huge pages and flushing
multiple-page ranges.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Yunhui Cui <cuiyunhui@bytedance.com>
Link: https://lore.kernel.org/r/20240327045035.368512-7-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Samuel Holland <samuel.holland@sifive.com> says:
This series aims to improve support for NOMMU, specifically by making it
easier to test NOMMU kernels in QEMU and on various widely-available
hardware (errata permitting). After all, everything supports Svbare...
After applying this series, a NOMMU kernel based on defconfig (changing
only the three options below*) boots to userspace on QEMU when passed as
-kernel.
# CONFIG_RISCV_M_MODE is not set
# CONFIG_MMU is not set
CONFIG_NONPORTABLE=y
*if you are using LLD, you must also disable BPF_SYSCALL and KALLSYMS,
because LLD bails on out-of-range references to undefined weak symbols.
* b4-shazam-merge:
riscv: Allow NOMMU kernels to run in S-mode
riscv: Remove MMU dependency from Zbb and Zicboz
riscv: Fix loading 64-bit NOMMU kernels past the start of RAM
riscv: Fix TASK_SIZE on 64-bit NOMMU
Link: https://lore.kernel.org/r/20240227003630.3634533-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The rust modules work on 64-bit RISC-V, with no twiddling required.
Select HAVE_RUST and provide the required flags to kbuild so that the
modules can be used. The Makefile and Kconfig changes are lifted from
work done by Miguel in the Rust-for-Linux tree, hence his authorship.
Following the rabbit hole, the Makefile changes originated in a script,
created based on config files originally added by Gary, hence his
co-authorship.
32-bit is broken in core rust code, so support is limited to 64-bit:
ld.lld: error: undefined symbol: __udivdi3
As 64-bit RISC-V is now supported, add it to the arch support table.
Co-developed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Co-developed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240409-silencer-book-ce1320f06aab@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Nowadays, we call it "GUP-fast", the external interface includes functions
like "get_user_pages_fast()", and we renamed all internal functions to
reflect that as well.
Let's make the config option reflect that.
Link: https://lkml.kernel.org/r/20240402125516.223131-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Select ARCH_USE_CMPXCHG_LOCKREF to enable the cmpxchg-based lockless
lockref implementation for riscv.
Using Linus' test case[1] on TH1520 platform, I see a 11.2% improvement.
On JH7110 platform, I see 12.0% improvement.
Link: http://marc.info/?l=linux-fsdevel&m=137782380714721&w=4 [1]
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20240325111038.1700-2-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
For ease of testing, it is convenient to run NOMMU kernels in supervisor
mode. The only required change is to offset the kernel load address,
since the beginning of RAM is usually reserved for M-mode firmware.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240227003630.3634533-5-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The Zbb and Zicboz ISA extensions have no dependency on an MMU and are
equally useful on NOMMU kernels.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240227003630.3634533-4-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The QEMU virt machine supports AIA emulation and quite a few RISC-V
platforms with AIA support are under development so select APLIC and
IMSIC drivers for all RISC-V platforms.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20240307140307.646078-9-apatel@ventanamicro.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for various vector-accelerated crypto routines
- Hibernation is now enabled for portable kernel builds
- mmap_rnd_bits_max is larger on systems with larger VAs
- Support for fast GUP
- Support for membarrier-based instruction cache synchronization
- Support for the Andes hart-level interrupt controller and PMU
- Some cleanups around unaligned access speed probing and Kconfig
settings
- Support for ACPI LPI and CPPC
- Various cleanus related to barriers
- A handful of fixes
* tag 'riscv-for-linus-6.9-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (66 commits)
riscv: Fix syscall wrapper for >word-size arguments
crypto: riscv - add vector crypto accelerated AES-CBC-CTS
crypto: riscv - parallelize AES-CBC decryption
riscv: Only flush the mm icache when setting an exec pte
riscv: Use kcalloc() instead of kzalloc()
riscv/barrier: Add missing space after ','
riscv/barrier: Consolidate fence definitions
riscv/barrier: Define RISCV_FULL_BARRIER
riscv/barrier: Define __{mb,rmb,wmb}
RISC-V: defconfig: Enable CONFIG_ACPI_CPPC_CPUFREQ
cpufreq: Move CPPC configs to common Kconfig and add RISC-V
ACPI: RISC-V: Add CPPC driver
ACPI: Enable ACPI_PROCESSOR for RISC-V
ACPI: RISC-V: Add LPI driver
cpuidle: RISC-V: Move few functions to arch/riscv
riscv: Introduce set_compat_task() in asm/compat.h
riscv: Introduce is_compat_thread() into compat.h
riscv: add compile-time test into is_compat_task()
riscv: Replace direct thread flag check with is_compat_task()
riscv: Improve arch_get_mmap_end() macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- Kuan-Wei Chiu has developed the well-named series "lib min_heap: Min
heap optimizations".
- Kuan-Wei Chiu has also sped up the library sorting code in the series
"lib/sort: Optimize the number of swaps and comparisons".
- Alexey Gladkov has added the ability for code running within an IPC
namespace to alter its IPC and MQ limits. The series is "Allow to
change ipc/mq sysctls inside ipc namespace".
- Geert Uytterhoeven has contributed some dhrystone maintenance work in
the series "lib: dhry: miscellaneous cleanups".
- Ryusuke Konishi continues nilfs2 maintenance work in the series
"nilfs2: eliminate kmap and kmap_atomic calls"
"nilfs2: fix kernel bug at submit_bh_wbc()"
- Nathan Chancellor has updated our build tools requirements in the
series "Bump the minimum supported version of LLVM to 13.0.1".
- Muhammad Usama Anjum continues with the selftests maintenance work in
the series "selftests/mm: Improve run_vmtests.sh".
- Oleg Nesterov has done some maintenance work against the signal code
in the series "get_signal: minor cleanups and fix".
Plus the usual shower of singleton patches in various parts of the tree.
Please see the individual changelogs for details.
* tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
nilfs2: prevent kernel bug at submit_bh_wbc()
nilfs2: fix failure to detect DAT corruption in btree and direct mappings
ocfs2: enable ocfs2_listxattr for special files
ocfs2: remove SLAB_MEM_SPREAD flag usage
assoc_array: fix the return value in assoc_array_insert_mid_shortcut()
buildid: use kmap_local_page()
watchdog/core: remove sysctl handlers from public header
nilfs2: use div64_ul() instead of do_div()
mul_u64_u64_div_u64: increase precision by conditionally swapping a and b
kexec: copy only happens before uchunk goes to zero
get_signal: don't initialize ksig->info if SIGNAL_GROUP_EXIT/group_exec_task
get_signal: hide_si_addr_tag_bits: fix the usage of uninitialized ksig
get_signal: don't abuse ksig->info.si_signo and ksig->sig
const_structs.checkpatch: add device_type
Normalise "name (ad@dr)" MODULE_AUTHORs to "name <ad@dr>"
dyndbg: replace kstrdup() + strchr() with kstrdup_and_replace()
list: leverage list_is_head() for list_entry_is_head()
nilfs2: MAINTAINERS: drop unreachable project mirror site
smp: make __smp_processor_id() 0-argument macro
fat: fix uninitialized field in nostale filehandles
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series
"mm: zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is
hotplugged as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving
policy wherein we allocate memory across nodes in a weighted fashion
rather than uniformly. This is beneficial in heterogeneous memory
environments appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the
process has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown
situations. The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings"
Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's
series "Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page
faults. He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction
test", Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and
refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
in our handling of DAX on archiecctures which have virtually aliasing
data caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides
dramatic improvements in worst-case mmap_lock hold times during
certain userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability
improvements in his series "Mitigate a vmap lock contention". It
realizes a 12x improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging
of large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages()
to an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which
are configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM
Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
mm/zswap: remove the memcpy if acomp is not sleepable
crypto: introduce: acomp_is_async to expose if comp drivers might sleep
memtest: use {READ,WRITE}_ONCE in memory scanning
mm: prohibit the last subpage from reusing the entire large folio
mm: recover pud_leaf() definitions in nopmd case
selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
selftests/mm: skip uffd hugetlb tests with insufficient hugepages
selftests/mm: dont fail testsuite due to a lack of hugepages
mm/huge_memory: skip invalid debugfs new_order input for folio split
mm/huge_memory: check new folio order when split a folio
mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
mm: fix list corruption in put_pages_list
mm: remove folio from deferred split list before uncharging it
filemap: avoid unnecessary major faults in filemap_fault()
mm,page_owner: drop unnecessary check
mm,page_owner: check for null stack_record before bumping its refcount
mm: swap: fix race between free_swap_and_cache() and swapoff()
mm/treewide: align up pXd_leaf() retval across archs
mm/treewide: drop pXd_large()
...
|
|
Charlie Jenkins <charlie@rivosinc.com> says:
If the hardware unaligned access speed is known at compile time, it is
possible to avoid running the unaligned access speed probe to speedup
boot-time.
* b4-shazam-merge:
riscv: Set unaligned access speed at compile time
riscv: Decouple emulated unaligned accesses from access speed
riscv: Only check online cpus for emulated accesses
riscv: lib: Introduce has_fast_unaligned_access()
Link: https://lore.kernel.org/r/20240308-disable_misaligned_probe_config-v9-0-a388770ba0ce@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Introduce Kconfig options to set the kernel unaligned access support.
These options provide a non-portable alternative to the runtime
unaligned access probe.
To support this, the unaligned access probing code is moved into it's
own file and gated behind a new RISCV_PROBE_UNALIGNED_ACCESS_SUPPORT
option.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240308-disable_misaligned_probe_config-v9-4-a388770ba0ce@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"As is pretty normal for this tree, there are changes all over the
place, especially for small fixes, selftest improvements, and improved
macro usability.
Some header changes ended up landing via this tree as they depended on
the string header cleanups. Also, a notable set of changes is the work
for the reintroduction of the UBSAN signed integer overflow sanitizer
so that we can continue to make improvements on the compiler side to
make this sanitizer a more viable future security hardening option.
Summary:
- string.h and related header cleanups (Tanzir Hasan, Andy
Shevchenko)
- VMCI memcpy() usage and struct_size() cleanups (Vasiliy Kovalev,
Harshit Mogalapalli)
- selftests/powerpc: Fix load_unaligned_zeropad build failure
(Michael Ellerman)
- hardened Kconfig fragment updates (Marco Elver, Lukas Bulwahn)
- Handle tail call optimization better in LKDTM (Douglas Anderson)
- Use long form types in overflow.h (Andy Shevchenko)
- Add flags param to string_get_size() (Andy Shevchenko)
- Add Coccinelle script for potential struct_size() use (Jacob
Keller)
- Fix objtool corner case under KCFI (Josh Poimboeuf)
- Drop 13 year old backward compat CAP_SYS_ADMIN check (Jingzi Meng)
- Add str_plural() helper (Michal Wajdeczko, Kees Cook)
- Ignore relocations in .notes section
- Add comments to explain how __is_constexpr() works
- Fix m68k stack alignment expectations in stackinit Kunit test
- Convert string selftests to KUnit
- Add KUnit tests for fortified string functions
- Improve reporting during fortified string warnings
- Allow non-type arg to type_max() and type_min()
- Allow strscpy() to be called with only 2 arguments
- Add binary mode to leaking_addresses scanner
- Various small cleanups to leaking_addresses scanner
- Adding wrapping_*() arithmetic helper
- Annotate initial signed integer wrap-around in refcount_t
- Add explicit UBSAN section to MAINTAINERS
- Fix UBSAN self-test warnings
- Simplify UBSAN build via removal of CONFIG_UBSAN_SANITIZE_ALL
- Reintroduce UBSAN's signed overflow sanitizer"
* tag 'hardening-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (51 commits)
selftests/powerpc: Fix load_unaligned_zeropad build failure
string: Convert helpers selftest to KUnit
string: Convert selftest to KUnit
sh: Fix build with CONFIG_UBSAN=y
compiler.h: Explain how __is_constexpr() works
overflow: Allow non-type arg to type_max() and type_min()
VMCI: Fix possible memcpy() run-time warning in vmci_datagram_invoke_guest_handler()
lib/string_helpers: Add flags param to string_get_size()
x86, relocs: Ignore relocations in .notes section
objtool: Fix UNWIND_HINT_{SAVE,RESTORE} across basic blocks
overflow: Use POD in check_shl_overflow()
lib: stackinit: Adjust target string to 8 bytes for m68k
sparc: vdso: Disable UBSAN instrumentation
kernel.h: Move lib/cmdline.c prototypes to string.h
leaking_addresses: Provide mechanism to scan binary files
leaking_addresses: Ignore input device status lines
leaking_addresses: Use File::Temp for /tmp files
MAINTAINERS: Update LEAKING_ADDRESSES details
fortify: Improve buffer overflow reporting
fortify: Add KUnit tests for runtime overflows
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"Just two small updates this time:
- A series I did to unify the definition of PAGE_SIZE through
Kconfig, intended to help with a vdso rework that needs the
constant but cannot include the normal kernel headers when building
the compat VDSO on arm64 and potentially others
- a patch from Yan Zhao to remove the pfn_to_virt() definitions from
a couple of architectures after finding they were both incorrect
and entirely unused"
* tag 'asm-generic-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
arch: define CONFIG_PAGE_SIZE_*KB on all architectures
arch: simplify architecture specific page size configuration
arch: consolidate existing CONFIG_PAGE_SIZE_*KB definitions
mm: Remove broken pfn_to_virt() on arch csky/hexagon/openrisc
|
|
Pull SoC device tree updates from Arnd Bergmann:
"There is very little going on with new SoC support this time, all the
new chips are variations of others that we already support, and they
are all based on ARMv8 cores:
- Mediatek MT7981B (Filogic 820) and MT7988A (Filogic 880) are
networking SoCs designed to be used in wireless routers, similar to
the already supported MT7986A (Filogic 830).
- NXP i.MX8DXP is a variant of i.MX8QXP, with two CPU cores less.
These are used in many embedded and industrial applications.
- Renesas R8A779G2 (R-Car V4H ES2.0) and R8A779H0 (R-Car V4M) are
automotive SoCs.
- TI J722S is another automotive variant of its K3 family, related to
the AM62 series.
There are a total of 7 new arm32 machines and 45 arm64 ones, including
- Two Android phones based on the old Tegra30 chip
- Two machines using Cortex-A53 SoCs from Allwinner, a mini PC and a
SoM development board
- A set-top box using Amlogic Meson G12A S905X2
- Eight embedded board using NXP i.MX6/8/9
- Three machines using Mediatek network router chips
- Ten Chromebooks, all based on Mediatek MT8186
- One development board based on Mediatek MT8395 (Genio 1200)
- Seven tablets and phones based on Qualcomm SoCs, most of them from
Samsung.
- A third development board for Qualcomm SM8550 (Snapdragon 8 Gen 2)
- Three variants of the "White Hawk" board for Renesas automotive
SoCs
- Ten Rockchips RK35xx based machines, including NAS, Tablet, Game
console and industrial form factors.
- Three evaluation boards for TI K3 based SoCs
The other changes are mainly the usual feature additions for existing
hardware, cleanups, and dtc compile time fixes. One notable change is
the inclusion of PowerVR SGX GPU nodes on TI SoCs"
* tag 'soc-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (824 commits)
riscv: dts: Move BUILTIN_DTB_SOURCE to common Kconfig
riscv: dts: starfive: jh7100: fix root clock names
ARM: dts: samsung: exynos4412: decrease memory to account for unusable region
arm64: dts: qcom: sm8250-xiaomi-elish: set rotation
arm64: dts: qcom: sm8650: Fix SPMI channels size
arm64: dts: qcom: sm8550: Fix SPMI channels size
arm64: dts: rockchip: Fix name for UART pin header on qnap-ts433
arm: dts: marvell: clearfog-gtr-l8: align port numbers with enclosure
arm: dts: marvell: clearfog-gtr-l8: add support for second sfp connector
dt-bindings: soc: renesas: renesas-soc: Add pattern for gray-hawk
dtc: Enable dtc interrupt_provider check
arm64: dts: st: add video encoder support to stm32mp255
arm64: dts: st: add video decoder support to stm32mp255
ARM: dts: stm32: enable crypto accelerator on stm32mp135f-dk
ARM: dts: stm32: enable CRC on stm32mp135f-dk
ARM: dts: stm32: add CRC on stm32mp131
ARM: dts: add stm32f769-disco-mb1166-reva09
ARM: dts: stm32: add display support on stm32f769-disco
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco
ARM: dts: stm32: add DSI support on stm32f769
...
|
|
Most architectures only support a single hardcoded page size. In order
to ensure that each one of these sets the corresponding Kconfig symbols,
change over the PAGE_SHIFT definition to the common one and allow
only the hardware page size to be selected.
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Stafford Horne <shorne@gmail.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The BUILTIN_DTB_SOURCE was only configured for K210 before. Since
SOC_BUILTIN_DTB_DECLARE was removed at commit d5805af9fe9f ("riscv: Fix
builtin DTB handling") from patch [1], the kernel cannot choose one of the
dtbs from then on and always take the first one dtb to use. Then, another
commit 0ddd7eaffa64 ("riscv: Fix BUILTIN_DTB for sifive and microchip soc")
from patch [2] supports BUILTIN_DTB_SOURCE for other SoCs. However, this
feature will only work if the Kconfig we use links the dtb we expected in
the first place as mentioned in the thread [3]. Thus, a config
BUILTIN_DTB_SOURCE is needed for all SoCs to choose one dtb to use.
For some considerations, this patch also removes default y if XIP_KERNEL
for BUILTIN_DTB, as this requires setting a proper dtb to use on the
BUILTIN_DTB_SOURCE, else the kernel with XIP but does not set
BUILTIN_DTB_SOURCE or unselect BUILTIN_DTB will not boot.
Also, this patch removes the default dtb string for k210 from Kconfig to
nommu_k210_defconfig and nommu_k210_sdcard_defconfig to avoid complex
Kconfig settings for other SoCs in the future.
[1] https://lore.kernel.org/linux-riscv/20201208073355.40828-5-damien.lemoal@wdc.com/
[2] https://lore.kernel.org/linux-riscv/20210604120639.1447869-1-alex@ghiti.fr/
[3] https://lore.kernel.org/linux-riscv/CAK7LNATt_56mO2Le4v4EnPnAfd3gC8S_Sm5-GCsfa=qXy=8Lrg@mail.gmail.com/
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
LLVM commit 8e01042da9d3 ("[RISCV] Add missing dependency check for Zvkb
(#79467)") broke the check used by the TOOLCHAIN_HAS_VECTOR_CRYPTO
kconfig symbol because it made zvkb start depending on v or zve*. Fix
this by specifying both v and zvkb when checking for support for zvkb.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240127090055.124336-1-ebiggers@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
These fixes are a dependency for the Zvkb patches, so I'm merging them
into for-next as well as fixes.
* commit '3aff0c459e77':
RISC-V: Drop invalid test from CONFIG_AS_HAS_OPTION_ARCH
kbuild: Add -Wa,--fatal-warnings to as-instr invocation
|
|
Patch series "Split crash out from kexec and clean up related config
items", v3.
Motivation:
=============
Previously, LKP reported a building error. When investigating, it can't
be resolved reasonablly with the present messy kdump config items.
https://lore.kernel.org/oe-kbuild-all/202312182200.Ka7MzifQ-lkp@intel.com/
The kdump (crash dumping) related config items could causes confusions:
Firstly,
CRASH_CORE enables codes including
- crashkernel reservation;
- elfcorehdr updating;
- vmcoreinfo exporting;
- crash hotplug handling;
Now fadump of powerpc, kcore dynamic debugging and kdump all selects
CRASH_CORE, while fadump
- fadump needs crashkernel parsing, vmcoreinfo exporting, and accessing
global variable 'elfcorehdr_addr';
- kcore only needs vmcoreinfo exporting;
- kdump needs all of the current kernel/crash_core.c.
So only enabling PROC_CORE or FA_DUMP will enable CRASH_CORE, this
mislead people that we enable crash dumping, actual it's not.
Secondly,
It's not reasonable to allow KEXEC_CORE select CRASH_CORE.
Because KEXEC_CORE enables codes which allocate control pages, copy
kexec/kdump segments, and prepare for switching. These codes are
shared by both kexec reboot and kdump. We could want kexec reboot,
but disable kdump. In that case, CRASH_CORE should not be selected.
--------------------
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
---------------------
Thirdly,
It's not reasonable to allow CRASH_DUMP select KEXEC_CORE.
That could make KEXEC_CORE, CRASH_DUMP are enabled independently from
KEXEC or KEXEC_FILE. However, w/o KEXEC or KEXEC_FILE, the KEXEC_CORE
code built in doesn't make any sense because no kernel loading or
switching will happen to utilize the KEXEC_CORE code.
---------------------
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_CRASH_DUMP=y
---------------------
In this case, what is worse, on arch sh and arm, KEXEC relies on MMU,
while CRASH_DUMP can still be enabled when !MMU, then compiling error is
seen as the lkp test robot reported in above link.
------arch/sh/Kconfig------
config ARCH_SUPPORTS_KEXEC
def_bool MMU
config ARCH_SUPPORTS_CRASH_DUMP
def_bool BROKEN_ON_SMP
---------------------------
Changes:
===========
1, split out crash_reserve.c from crash_core.c;
2, split out vmcore_infoc. from crash_core.c;
3, move crash related codes in kexec_core.c into crash_core.c;
4, remove dependency of FA_DUMP on CRASH_DUMP;
5, clean up kdump related config items;
6, wrap up crash codes in crash related ifdefs on all 8 arch-es
which support crash dumping, except of ppc;
Achievement:
===========
With above changes, I can rearrange the config item logic as below (the right
item depends on or is selected by the left item):
PROC_KCORE -----------> VMCORE_INFO
|----------> VMCORE_INFO
FA_DUMP----|
|----------> CRASH_RESERVE
---->VMCORE_INFO
/
|---->CRASH_RESERVE
KEXEC --| /|
|--> KEXEC_CORE--> CRASH_DUMP-->/-|---->PROC_VMCORE
KEXEC_FILE --| \ |
\---->CRASH_HOTPLUG
KEXEC --|
|--> KEXEC_CORE (for kexec reboot only)
KEXEC_FILE --|
Test
========
On all 8 architectures, including x86_64, arm64, s390x, sh, arm, mips,
riscv, loongarch, I did below three cases of config item setting and
building all passed. Take configs on x86_64 as exampmle here:
(1) Both CONFIG_KEXEC and KEXEC_FILE is unset, then all kexec/kdump
items are unset automatically:
# Kexec and crash features
# CONFIG_KEXEC is not set
# CONFIG_KEXEC_FILE is not set
# end of Kexec and crash features
(2) set CONFIG_KEXEC_FILE and 'make olddefconfig':
---------------
# Kexec and crash features
CONFIG_CRASH_RESERVE=y
CONFIG_VMCORE_INFO=y
CONFIG_KEXEC_CORE=y
CONFIG_KEXEC_FILE=y
CONFIG_CRASH_DUMP=y
CONFIG_CRASH_HOTPLUG=y
CONFIG_CRASH_MAX_MEMORY_RANGES=8192
# end of Kexec and crash features
---------------
(3) unset CONFIG_CRASH_DUMP in case 2 and execute 'make olddefconfig':
------------------------
# Kexec and crash features
CONFIG_KEXEC_CORE=y
CONFIG_KEXEC_FILE=y
# end of Kexec and crash features
------------------------
Note:
For ppc, it needs investigation to make clear how to split out crash
code in arch folder. Hope Hari and Pingfan can help have a look, see if
it's doable. Now, I make it either have both kexec and crash enabled, or
disable both of them altogether.
This patch (of 14):
Both kdump and fa_dump of ppc rely on crashkernel reservation. Move the
relevant codes into separate files: crash_reserve.c,
include/linux/crash_reserve.h.
And also add config item CRASH_RESERVE to control its enabling of the
codes. And update config items which has relationship with crashkernel
reservation.
And also change ifdeffery from CONFIG_CRASH_CORE to CONFIG_CRASH_RESERVE
when those scopes are only crashkernel reservation related.
And also rename arch/XXX/include/asm/{crash_core.h => crash_reserve.h} on
arm64, x86 and risc-v because those architectures' crash_core.h is only
related to crashkernel reservation.
[akpm@linux-foundation.org: s/CRASH_RESEERVE/CRASH_RESERVE/, per Klara Modin]
Link: https://lkml.kernel.org/r/20240124051254.67105-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20240124051254.67105-2-bhe@redhat.com
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pingfan Liu <piliu@redhat.com>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Michael Kelley <mhklinux@outlook.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
CONFIG_CLANG_SUPPORTS_DYNAMIC_FTRACE
Now that the minimum supported version of LLVM for building the kernel has
been bumped to 13.0.1, this condition is always true, as the build will
fail during the configuration stage for older LLVM versions. Remove it.
Link: https://lkml.kernel.org/r/20240125-bump-min-llvm-ver-to-13-0-1-v1-8-f5ff9bda41c5@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Conor Dooley <conor@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
reviews.llvm.org was LLVM's Phabricator instances for code review. It has
been abandoned in favor of GitHub pull requests. While the majority of
links in the kernel sources still work because of the work Fangrui has
done turning the dynamic Phabricator instance into a static archive, there
are some issues with that work, so preemptively convert all the links in
the kernel sources to point to the commit on GitHub.
Most of the commits have the corresponding differential review link in the
commit message itself so there should not be any loss of fidelity in the
relevant information.
Link: https://discourse.llvm.org/t/update-on-github-pull-requests/71540/172
Link: https://lkml.kernel.org/r/20240109-update-llvm-links-v1-2-eb09b59db071@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Fangrui Song <maskray@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Mykola Lysenko <mykolal@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit e4bb020f3dbb ("riscv: detect assembler support for .option arch")
added two tests, one for a valid value to '.option arch' that should
succeed and one for an invalid value that is expected to fail to make
sure that support for '.option arch' is properly detected because Clang
does not error when '.option arch' is not supported:
$ clang --target=riscv64-linux-gnu -Werror -x assembler -c -o /dev/null <(echo '.option arch, +m')
/dev/fd/63:1:9: warning: unknown option, expected 'push', 'pop', 'rvc', 'norvc', 'relax' or 'norelax'
.option arch, +m
^
$ echo $?
0
Unfortunately, the invalid test started being accepted by Clang after
the linked llvm-project change, which causes CONFIG_AS_HAS_OPTION_ARCH
and configurations that depend on it to be silently disabled, even
though those versions do support '.option arch'.
The invalid test can be avoided altogether by using
'-Wa,--fatal-warnings', which will turn all assembler warnings into
errors, like '-Werror' does for the compiler:
$ clang --target=riscv64-linux-gnu -Werror -Wa,--fatal-warnings -x assembler -c -o /dev/null <(echo '.option arch, +m')
/dev/fd/63:1:9: error: unknown option, expected 'push', 'pop', 'rvc', 'norvc', 'relax' or 'norelax'
.option arch, +m
^
$ echo $?
1
The as-instr macros have been updated to make use of this flag, so
remove the invalid test, which allows CONFIG_AS_HAS_OPTION_ARCH to work
for all compiler versions.
Cc: stable@vger.kernel.org
Fixes: e4bb020f3dbb ("riscv: detect assembler support for .option arch")
Link: https://github.com/llvm/llvm-project/commit/3ac9fe69f70a2b3541266daedbaaa7dc9c007a2a
Reported-by: Eric Biggers <ebiggers@kernel.org>
Closes: https://lore.kernel.org/r/20240121011341.GA97368@sol.localdomain/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Tested-by: Andy Chiu <andybnac@gmail.com>
Reviewed-by: Andy Chiu <andybnac@gmail.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240125-fix-riscv-option-arch-llvm-18-v1-2-390ac9cc3cd0@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
RISC-V was lacking a membarrier implementation for the store/fetch
ordering, which is a bit tricky because of the deferred icache flushing
we use in RISC-V.
* b4-shazam-merge:
membarrier: riscv: Provide core serializing command
locking: Introduce prepare_sync_core_cmd()
membarrier: Create Documentation/scheduler/membarrier.rst
membarrier: riscv: Add full memory barrier in switch_mm()
Link: https://lore.kernel.org/r/20240131144936.29190-1-parri.andrea@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
RISC-V uses xRET instructions on return from interrupt and to go back
to user-space; the xRET instruction is not core serializing.
Use FENCE.I for providing core serialization as follows:
- by calling sync_core_before_usermode() on return from interrupt (cf.
ipi_sync_core()),
- via switch_mm() and sync_core_before_usermode() (respectively, for
uthread->uthread and kthread->uthread transitions) before returning
to user-space.
On RISC-V, the serialization in switch_mm() is activated by resetting
the icache_stale_mask of the mm at prepare_sync_core_cmd().
Suggested-by: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/r/20240131144936.29190-5-parri.andrea@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The membarrier system call requires a full memory barrier after storing
to rq->curr, before going back to user-space. The barrier is only
needed when switching between processes: the barrier is implied by
mmdrop() when switching from kernel to userspace, and it's not needed
when switching from userspace to kernel.
Rely on the feature/mechanism ARCH_HAS_MEMBARRIER_CALLBACKS and on the
primitive membarrier_arch_switch_mm(), already adopted by the PowerPC
architecture, to insert the required barrier.
Fixes: fab957c11efe2f ("RISC-V: Atomic and Locking Code")
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/r/20240131144936.29190-2-parri.andrea@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
For simplicity in splitting out UBSan options into separate rules,
remove CONFIG_UBSAN_SANITIZE_ALL, effectively defaulting to "y", which
is how it is generally used anyway. (There are no ":= y" cases beyond
where a specific file is enabled when a top-level ":= n" is in effect.)
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Marco Elver <elver@google.com>
Cc: linux-doc@vger.kernel.org
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Inspired from arm64's implement -- commit 70918779aec9
("arm64: entry: Enable random_kstack_offset support")
Add support of kernel stack offset randomization while handling syscall,
the offset is defaultly limited by KSTACK_OFFSET_MAX() (i.e. 10 bits).
In order to avoid trigger stack canaries (due to __builtin_alloca) and
slowing down the entry path, use __no_stack_protector attribute to
disable stack protector for do_trap_ecall_u() at the function level.
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Song Shuai <songshuaishuai@tinylab.org>
Link: https://lore.kernel.org/r/20231109133751.212079-1-songshuaishuai@tinylab.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Jisheng Zhang <jszhang@kernel.org> says:
This series adds fast gup support to riscv.
The First patch fixes a bug in __p*d_free_tlb(). Per the riscv
privileged spec, if non-leaf PTEs I.E pmd, pud or p4d is modified, a
sfence.vma is a must.
The 2nd patch is a preparation patch.
The last two patches do the real work:
In order to implement fast gup we need to ensure that the page
table walker is protected from page table pages being freed from
under it.
riscv situation is more complicated than other architectures: some
riscv platforms may use IPI to perform TLB shootdown, for example,
those platforms which support AIA, usually the riscv_ipi_for_rfence is
true on these platforms; some riscv platforms may rely on the SBI to
perform TLB shootdown, usually the riscv_ipi_for_rfence is false on
these platforms. To keep software pagetable walkers safe in this case
we switch to RCU based table free (MMU_GATHER_RCU_TABLE_FREE). See the
comment below 'ifdef CONFIG_MMU_GATHER_RCU_TABLE_FREE' in
include/asm-generic/tlb.h for more details.
This patch enables MMU_GATHER_RCU_TABLE_FREE, then use
*tlb_remove_page_ptdesc() for those platforms which use IPI to perform
TLB shootdown;
*tlb_remove_ptdesc() for those platforms which use SBI to perform TLB
shootdown;
Both case mean that disabling interrupts will block the free and
protect the fast gup page walker.
So after the 3rd patch, everything is well prepared, let's select
HAVE_FAST_GUP if MMU.
* b4-shazam-merge:
riscv: enable HAVE_FAST_GUP if MMU
riscv: enable MMU_GATHER_RCU_TABLE_FREE for SMP && MMU
riscv: tlb: convert __p*d_free_tlb() to inline functions
riscv: tlb: fix __p*d_free_tlb()
Link: https://lore.kernel.org/r/20231219175046.2496-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Activate the fast gup for riscv mmu platforms. Here are some
GUP_FAST_BENCHMARK performance numbers:
Before the patch:
GUP_FAST_BENCHMARK: Time: get:53203 put:5085 us
After the patch:
GUP_FAST_BENCHMARK: Time: get:17711 put:5060 us
The get time is reduced by 66.7%! IOW, 3x get speed!
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20231219175046.2496-5-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
In order to implement fast gup we need to ensure that the page
table walker is protected from page table pages being freed from
under it.
riscv situation is more complicated than other architectures: some
riscv platforms may use IPI to perform TLB shootdown, for example,
those platforms which support AIA, usually the riscv_ipi_for_rfence is
true on these platforms; some riscv platforms may rely on the SBI to
perform TLB shootdown, usually the riscv_ipi_for_rfence is false on
these platforms. To keep software pagetable walkers safe in this case
we switch to RCU based table free (MMU_GATHER_RCU_TABLE_FREE). See the
comment below 'ifdef CONFIG_MMU_GATHER_RCU_TABLE_FREE' in
include/asm-generic/tlb.h for more details.
This patch enables MMU_GATHER_RCU_TABLE_FREE, then use
*tlb_remove_page_ptdesc() for those platforms which use IPI to perform
TLB shootdown;
*tlb_remove_ptdesc() for those platforms which use SBI to perform TLB
shootdown;
Both case mean that disabling interrupts will block the free and
protect the fast gup page walker.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20231219175046.2496-4-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Revert commit ed309ce52218 ("RISC-V: mark hibernation as nonportable")
as it appears the broken versions of OpenSBI have not made it to
production on any systems that support hibernation.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230802-chef-throng-d9de8b672a49@wendy
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Eric Biggers <ebiggers@kernel.org> says:
This patchset, which applies to v6.8-rc1, adds cryptographic algorithm
implementations accelerated using the RISC-V vector crypto extensions
(https://github.com/riscv/riscv-crypto/releases/download/v1.0.0/riscv-crypto-spec-vector.pdf)
and RISC-V vector extension
(https://github.com/riscv/riscv-v-spec/releases/download/v1.0/riscv-v-spec-1.0.pdf).
The following algorithms are included: AES in ECB, CBC, CTR, and XTS modes;
ChaCha20; GHASH; SHA-2; SM3; and SM4.
In general, the assembly code requires a 64-bit RISC-V CPU with VLEN >= 128,
little endian byte order, and vector unaligned access support. The ECB, CTR,
XTS, and ChaCha20 code is designed to naturally scale up to larger VLEN values.
Building the assembly code requires tip-of-tree binutils (future 2.42) or
tip-of-tree clang (future 18.x). All algorithms pass testing in QEMU, using
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y. Much of the assembly code is derived from
OpenSSL code that was added by https://github.com/openssl/openssl/pull/21923.
It's been cleaned up for integration with the kernel, e.g. reducing code
duplication, eliminating use of .inst and perlasm, and fixing a few bugs.
This patchset incorporates the work of multiple people, including Jerry Shih,
Heiko Stuebner, Christoph Müllner, Phoebe Chen, Charalampos Mitrodimas, and
myself. This patchset went through several versions from Heiko (last version
https://lore.kernel.org/linux-crypto/20230711153743.1970625-1-heiko@sntech.de),
then several versions from Jerry (last version:
https://lore.kernel.org/linux-crypto/20231231152743.6304-1-jerry.shih@sifive.com),
then finally several versions from me. Thanks to everyone who has contributed
to this patchset or its prerequisites.
* b4-shazam-merge:
crypto: riscv - add vector crypto accelerated SM4
crypto: riscv - add vector crypto accelerated SM3
crypto: riscv - add vector crypto accelerated SHA-{512,384}
crypto: riscv - add vector crypto accelerated SHA-{256,224}
crypto: riscv - add vector crypto accelerated GHASH
crypto: riscv - add vector crypto accelerated ChaCha20
crypto: riscv - add vector crypto accelerated AES-{ECB,CBC,CTR,XTS}
RISC-V: hook new crypto subdir into build-system
RISC-V: add TOOLCHAIN_HAS_VECTOR_CRYPTO
RISC-V: add helper function to read the vector VLEN
Link: https://lore.kernel.org/r/20240122002024.27477-1-ebiggers@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
