summaryrefslogtreecommitdiff
path: root/arch/powerpc/configs/44x/icon_defconfig
AgeCommit message (Collapse)Author
2021-03-23xsysace: Remove SYSACE driverMichal Simek
Sysace IP is no longer used on Xilinx PowerPC 405/440 and Microblaze systems. The driver is not regularly tested and very likely not working for quite a long time that's why remove it. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-22powerpc/configs: Remove CMDLINE_BOOLChris Packham
Regenerate defconfigs to remove CONFIG_CMDLINE_BOOL and the default CONFIG_CMDLINE where applicable. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200611224220.25066-3-chris.packham@alliedtelesis.co.nz
2019-11-13powerpc/configs: remove obsolete CONFIG_INET_XFRM_MODE_* and ↵YueHaibing
CONFIG_INET6_XFRM_MODE_* These Kconfig options has been removed in commit 4c145dce2601 ("xfrm: make xfrm modes builtin") So there is no point to keep it in defconfigs any longer. Signed-off-by: YueHaibing <yuehaibing@huawei.com> [mpe: Extract from cross arch patch] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190612071901.21736-1-yuehaibing@huawei.com
2019-07-03powerpc/configs: Remove useless UEVENT_HELPER_PATHKrzysztof Kozlowski
Remove the CONFIG_UEVENT_HELPER_PATH because: 1. It is disabled since commit 1be01d4a5714 ("driver: base: Disable CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was made default to 'n', 2. It is not recommended (help message: "This should not be used today [...] creates a high system load") and was kept only for ancient userland, 3. Certain userland specifically requests it to be disabled (systemd README: "Legacy hotplug slows down the system and confuses udev"). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Explicitly drop CONFIG_INPUT_MOUSEDEVMichael Ellerman
In commit 73d8ef76006b ("Input: mousedev - stop offering PS/2 to userspace by default") (Jan 2017), CONFIG_INPUT_MOUSEDEV was switched from default y to default n, with the explanation: Evdev interface has been available for many years and by now everyone is switched to using it, so let's stop offering /dev/input/mouseN and /dev/psaux by default. We had a number of configs which had it enabled, but going by the above explanation probably don't need it enabled anymore. So drop the last remnants of it from our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-28powerpc/configs: Drop unneeded CONFIG_CRYPTO_ANSI_CPRNGMichael Ellerman
Since commit 401e4238f35c ("crypto: rng - Make DRBG the default RNG") we no longer need to set CONFIG_CRYPTO_ANSI_CPRNG in our defconfigs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-08powerpc/configs: Remove old symbols from defconfigsAndrew Donnellan
Update defconfigs to remove old symbols and comments referencing old symbols. Dropped: * AVERAGE * INET_LRO * EXT3_DEFAULTS_TO_ORDERED * EXT3_FS_XATTR * I2O * INFINIBAND_AMSO1100 * INFINIBAND_EHCA * IP1000 Replaced: * BLK_DEV_XIP -> BLK_DEV_RAM_DAX * CLK_PPC_CORENET -> CLK_QORIQ * EXT2_FS_XIP -> FS_DAX * EXT3_FS* -> EXT4_FS* Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-01-20powerpc: Update all configs using savedefconfigMichael Ellerman
It looks like it's ~4 years since we updated some of these, so do a bulk update. Verified that the before and after generated configs are exactly the same. Which begs the question why update them? The answer is that it can be confusing when the stored defconfig drifts too far from the generated result. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-03-07powerpc: : Kill CONFIG_MTD_PARTITIONS송은봉
This patch removes CONFIG_MTD_PARTITIONS in config files for powerpc. Because CONFIG_MTD_PARTITIONS was removed by commit 6a8a98b22b10f1560d5f90aded4a54234b9b2724. Signed-off-by: Eunbong Song <eunb.song@samsung.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-08-18net: fix IBM EMAC driver after rename.Tony Breeds
In commit 9aa3283595451ca093500ff0977b106e1f465586 (ehea/ibm*: Move the IBM drivers) the IBM_NEW_EMAC* were renames to IBM_EMAC* The conversion was incomplete so that even if the driver was added to the .config it wasn't built, but there were no errors). In this commit we also update the various defconfigs that use EMAC to use the new Kconfig symbol, and explicitly add the NET_VENDOR_IBM guard. We do not explicitly select the Kconfig dependencies, as this would force EMAC on. Doing it in the defconfig allows more flexibility. Tested on a canyondlands board. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-20kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERTDavid Rientjes
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09powerpc: Trim defconfigsBenjamin Herrenschmidt
This trims all our defconfigs using make savedefconfig Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-26powerpc/44x: icon: select SM502 and frame buffer console supportAnatolij Gustschin
Enables SM502 frame buffer and framebuffer console in the default config file Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-05-12powerpc/44x: Add basic ICON PPC440SPe board supportStefan Roese
ICON is based on the AppliedMicro 440SPe. It is equipped with 64MByte NOR FLASH, SODIMM, Gigabit ethernet, SM502 on PCI(X), LSI SAS1068E on PCIe0 and custom FPGA on PCIe1. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>