summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2024-07-16Merge tag 'net-next-6.11' of ↵HEADmasterLinus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Not much excitement - a handful of large patchsets (devmem among them) did not make it in time. Core & protocols: - Use local_lock in addition to local_bh_disable() to protect per-CPU resources in networking, a step closer for local_bh_disable() not to act as a big lock on PREEMPT_RT - Use flex array for netdevice priv area, ensure its cache alignment - Add a sysctl knob to allow user to specify a default rto_min at socket init time. Bit of a big hammer but multiple companies were independently carrying such patch downstream so clearly it's useful - Support scheduling transmission of packets based on CLOCK_TAI - Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned off using cpusets - Support multiple L2TPv3 UDP tunnels using the same 5-tuple address - Allow configuration of multipath hash seed, to both allow synchronizing hashing of two routers, and preventing partial accidental sync - Improve TCP compliance with RFC 9293 for simultaneous connect() - Support sending NAT keepalives in IPsec ESP in UDP states. Userspace IKE daemon had to do this before, but the kernel can better keep track of it - Support sending supervision HSR frames with MAC addresses stored in ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled - Introduce IPPROTO_SMC for selecting SMC when socket is created - Allow UDP GSO transmit from devices with no checksum offload - openvswitch: add packet sampling via psample, separating the sampled traffic from "upcall" packets sent to user space for forwarding - nf_tables: shrink memory consumption for transaction objects Things we sprinkled into general kernel code: - Power Sequencing subsystem (used by Qualcomm Bluetooth driver for QCA6390) [ Already merged separately - Linus ] - Add IRQ information in sysfs for auxiliary bus - Introduce guard definition for local_lock - Add aligned flavor of __cacheline_group_{begin, end}() markings for grouping fields in structures BPF: - Notify user space (via epoll) when a struct_ops object is getting detached/unregistered - Add new kfuncs for a generic, open-coded bits iterator - Enable BPF programs to declare arrays of kptr, bpf_rb_root, and bpf_list_head - Support resilient split BTF which cuts down on duplication and makes BTF as compact as possible WRT BTF from modules - Add support for dumping kfunc prototypes from BTF which enables both detecting as well as dumping compilable prototypes for kfuncs - riscv64 BPF JIT improvements in particular to add 12-argument support for BPF trampolines and to utilize bpf_prog_pack for the latter - Add the capability to offload the netfilter flowtable in XDP layer through kfuncs Driver API: - Allow users to configure IRQ tresholds between which automatic IRQ moderation can choose - Expand Power Sourcing (PoE) status with power, class and failure reason. Support setting power limits - Track additional RSS contexts in the core, make sure configuration changes don't break them - Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated ESP data paths - Support updating firmware on SFP modules Tests and tooling: - mptcp: use net/lib.sh to manage netns - TCP-AO and TCP-MD5: replace debug prints used by tests with tracepoints - openvswitch: make test self-contained (don't depend on OvS CLI tools) Drivers: - Ethernet high-speed NICs: - Broadcom (bnxt): - increase the max total outstanding PTP TX packets to 4 - add timestamping statistics support - implement netdev_queue_mgmt_ops - support new RSS context API - Intel (100G, ice, idpf): - implement FEC statistics and dumping signal quality indicators - support E825C products (with 56Gbps PHYs) - nVidia/Mellanox: - support HW-GRO - mlx4/mlx5: support per-queue statistics via netlink - obey the max number of EQs setting in sub-functions - AMD/Solarflare: - support new RSS context API - AMD/Pensando: - ionic: rework fix for doorbell miss to lower overhead and skip it on new HW - Wangxun: - txgbe: support Flow Director perfect filters - Ethernet NICs consumer, embedded and virtual: - Add driver for Tehuti Networks TN40xx chips - Add driver for Meta's internal NIC chips - Add driver for Ethernet MAC on Airoha EN7581 SoCs - Add driver for Renesas Ethernet-TSN devices - Google cloud vNIC: - flow steering support - Microsoft vNIC: - support page sizes other than 4KB on ARM64 - vmware vNIC: - support latency measurement (update to version 9) - VirtIO net: - support for Byte Queue Limits - support configuring thresholds for automatic IRQ moderation - support for AF_XDP Rx zero-copy - Synopsys (stmmac): - support for STM32MP13 SoC - let platforms select the right PCS implementation - TI: - icssg-prueth: add multicast filtering support - icssg-prueth: enable PTP timestamping and PPS - Renesas: - ravb: improve Rx performance 30-400% by using page pool, theaded NAPI and timer-based IRQ coalescing - ravb: add MII support for R-Car V4M - Cadence (macb): - macb: add ARP support to Wake-On-LAN - Cortina: - use phylib for RX and TX pause configuration - Ethernet switches: - nVidia/Mellanox: - support configuration of multipath hash seed - report more accurate max MTU - use page_pool to improve Rx performance - MediaTek: - mt7530: add support for bridge port isolation - Qualcomm: - qca8k: add support for bridge port isolation - Microchip: - lan9371/2: add 100BaseTX PHY support - NXP: - vsc73xx: implement VLAN operations - Ethernet PHYs: - aquantia: enable support for aqr115c - aquantia: add support for PHY LEDs - realtek: add support for rtl8224 2.5Gbps PHY - xpcs: add memory-mapped device support - add BroadR-Reach link mode and support in Broadcom's PHY driver - CAN: - add document for ISO 15765-2 protocol support - mcp251xfd: workaround for erratum DS80000789E, use timestamps to catch when device returns incorrect FIFO status - WiFi: - mac80211/cfg80211: - parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers - improvements for 6 GHz regulatory flexibility - multi-link improvements - support multiple radios per wiphy - remove DEAUTH_NEED_MGD_TX_PREP flag - Intel (iwlwifi): - bump FW API to 91 for BZ/SC devices - report 64-bit radiotap timestamp - enable P2P low latency by default - handle Transmit Power Envelope (TPE) advertised by AP - remove support for older FW for new devices - fast resume (keeping the device configured) - mvm: re-enable Multi-Link Operation (MLO) - aggregation (A-MSDU) optimizations - MediaTek (mt76): - mt7925 Multi-Link Operation (MLO) support - Qualcomm (ath10k): - LED support for various chipsets - Qualcomm (ath12k): - remove unsupported Tx monitor handling - support channel 2 in 6 GHz band - support Spatial Multiplexing Power Save (SMPS) in 6 GHz band - supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) - support dynamic VLAN - add panic handler for resetting the firmware state - DebugFS support for datapath statistics - WCN7850: support for Wake on WLAN - Microchip (wilc1000): - read MAC address during probe to make it visible to user space - suspend/resume improvements - TI (wl18xx): - support newer firmware versions - RealTek (rtw89): - preparation for RTL8852BE-VT support - Wake on WLAN support for WiFi 6 chips - 36-bit PCI DMA support - RealTek (rtlwifi): - RTL8192DU support - Broadcom (brcmfmac): - Management Frame Protection support (to enable WPA3) - Bluetooth: - qualcomm: use the power sequencer for QCA6390 - btusb: mediatek: add ISO data transmission functions - hci_bcm4377: add BCM4388 support - btintel: add support for BlazarU core - btintel: add support for Whale Peak2 - btnxpuart: add support for AW693 A1 chipset - btnxpuart: add support for IW615 chipset - btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591" * tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits) eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering" tcp: Replace strncpy() with strscpy() wifi: ath12k: fix build vs old compiler tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child(). eth: fbnic: Write the TCAM tables used for RSS control and Rx to host eth: fbnic: Add L2 address programming eth: fbnic: Add basic Rx handling eth: fbnic: Add basic Tx handling eth: fbnic: Add link detection eth: fbnic: Add initial messaging to notify FW of our presence eth: fbnic: Implement Rx queue alloc/start/stop/free eth: fbnic: Implement Tx queue alloc/start/stop/free eth: fbnic: Allocate a netdevice and napi vectors with queues eth: fbnic: Add FW communication mechanism eth: fbnic: Add message parsing for FW messages eth: fbnic: Add register init to set PCIe/Ethernet device config eth: fbnic: Allocate core device specific structures and devlink interface eth: fbnic: Add scaffolding for Meta's NIC driver PCI: Add Meta Platforms vendor ID net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK ...
2024-07-16Merge tag 'hardening-v6.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: - lkdtm/bugs: add test for hung smp_call_function_single() (Mark Rutland) - gcc-plugins: Remove duplicate included header file stringpool.h (Thorsten Blum) - ARM: Remove address checking for MMUless devices (Yanjun Yang) - randomize_kstack: Clean up per-arch entropy and codegen - KCFI: Make FineIBT mode Kconfig selectable - fortify: Do not special-case 0-sized destinations * tag 'hardening-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: randomize_kstack: Improve stack alignment codegen ARM: Remove address checking for MMUless devices gcc-plugins: Remove duplicate included header file stringpool.h randomize_kstack: Remove non-functional per-arch entropy filtering fortify: Do not special-case 0-sized destinations x86/alternatives: Make FineIBT mode Kconfig selectable lkdtm/bugs: add test for hung smp_call_function_single()
2024-07-16Merge tag 'for-linus-6.11-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - some trivial cleanups - a fix for the Xen timer - add boot time selectable debug capability to the Xen multicall handling - two fixes for the recently added Xen irqfd handling * tag 'for-linus-6.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: remove deprecated xen_nopvspin boot parameter x86/xen: eliminate some private header files x86/xen: make some functions static xen: make multicall debug boot time selectable xen/arm: Convert comma to semicolon xen: privcmd: Fix possible access to a freed kirqfd instance xen: privcmd: Switch from mutex to spinlock for irqfds xen: add missing MODULE_DESCRIPTION() macros x86/xen: Convert comma to semicolon x86/xen/time: Reduce Xen timer tick xen/manage: Constify struct shutdown_handler
2024-07-16Merge tag 'asm-generic-6.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "Most of this is part of my ongoing work to clean up the system call tables. In this bit, all of the newer architectures are converted to use the machine readable syscall.tbl format instead in place of complex macros in include/uapi/asm-generic/unistd.h. This follows an earlier series that fixed various API mismatches and in turn is used as the base for planned simplifications. The other two patches are dead code removal and a warning fix" * tag 'asm-generic-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: vmlinux.lds.h: catch .bss..L* sections into BSS") fixmap: Remove unused set_fixmap_offset_io() riscv: convert to generic syscall table openrisc: convert to generic syscall table nios2: convert to generic syscall table loongarch: convert to generic syscall table hexagon: use new system call table csky: convert to generic syscall table arm64: rework compat syscall macros arm64: generate 64-bit syscall.tbl arm64: convert unistd_32.h to syscall.tbl format arc: convert to generic syscall table clone3: drop __ARCH_WANT_SYS_CLONE3 macro kbuild: add syscall table generation to scripts/Makefile.asm-headers kbuild: verify asm-generic header list loongarch: avoid generating extra header files um: don't generate asm/bpf_perf_event.h csky: drop asm/gpio.h wrapper syscalls: add generic scripts/syscall.tbl
2024-07-16Merge tag 'soc-arm-6.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull arm SoC platform updates from Arnd Bergmann: "The majority of the updates here are Dmitry Torokhov's cleanups for platform code in the pxa and tegra platforms, changing custom platform_data structures into DT-compatible software node declarations. The other updates are for the MAINTAINERS file, correcting some stale or missing entries" * tag 'soc-arm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: pxa: fix build breakage on PXA3xx ti: omap: MAINTAINERS: move Benoît Cousson to CREDITS amazon: MAINTAINERS: change to odd fixes and Tsahee Zidenberg to CREDITS MAINTAINERS: thead: add git tree ARM: spitz: Use software nodes for the ADS7846 touchscreen ARM: spitz: Use software nodes to describe LED GPIOs ARM: spitz: Use software nodes to describe MMC GPIOs ARM: spitz: Use software nodes to describe LCD GPIOs ARM: spitz: Use software nodes to describe audio GPIOs ARM: spitz: Use software nodes to describe SPI CS lines ARM: spitz: Simplify instantiating SPI controller ARM: pxa/gumstix: convert vbus gpio to use software nodes ARM: pxa: consolidate GPIO chip platform data ARM: spitz: fix GPIO assignment for backlight ARM: tegra: paz00: Use software nodes to describe GPIOs for WiFi rfkill MAINTAINERS: ARM: airoha: add entry to cover Airoha SoC bus: vexpress-config: Add missing MODULE_DESCRIPTION() macro arm64: layerscape: remove redundant EDAC_SUPPORT selection dt-bindings: arm: Remove obsolete RTSM DCSCB binding arm: vexpress: Remove obsolete RTSM DCSCB support
2024-07-16Merge tag 'soc-defconfig-6.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC defconfig updates from Arnd Bergmann: "These are the usual updates to enable newly added drivers, mostly for arm64 and riscv this time" * tag 'soc-defconfig-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: defconfig: Enable the IWLWIFI driver ARM: multi_v7_defconfig: Add MCP23S08 pinctrl support arm64: defconfig: Enable NVIDIA CoreSight PMU driver arm64: defconfig: enable SHM Bridge support for the TZ memory allocator arm64: defconfig: Enable secure QFPROM driver ARM: imx_v6_v7_defconfig: enable DRM_SII902X and DRM_DISPLAY_CONNECTOR ARM: imx_v6_v7_defconfig: Enable drivers for TQMa7x/MBa7x riscv: defconfig: Enable StarFive JH7110 drivers arm64: defconfig: Enable TI LP873X PMIC arm64: defconfig: Enable USB2 PHY Driver arm64: defconfig: Enable MTD support for Hyperbus ARM: configs: at91: Enable LVDS serializer support arm64: defconfig: enable several Qualcomm interconnects arm64: defconfig: Enable Marvell 88Q2XXX PHY support arm64: defconfig: make CONFIG_INTERCONNECT_QCOM_SM8350 built-in arm64: defconfig: enable CONFIG_SM_GPUCC_8350 arm64: defconfig: Enable Renesas R-Car Gen4 PCIe controller
2024-07-16Merge tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull SoC dt updates from Arnd Bergmann: "The devicetree updates are fairly well spread out across platforms, with Qualcomm making up about a third of the total. There are three new SoCs in existing product families this: - NXP i.MX95 is a variant of i.MX93, now with six Cortex-A55 cores instead of just two as well as a GPU and more high-speed I/O devices. - Qualcomm QCS8550 is a variant of SM8550 for IOT devices - Airoha EN7581 is a 10G-PON network chip and related to the MT7981 Wireless router chip from its parent Mediatek. In total there are 58 new machines, including four riscv boards and eight for 32-bit arm. The most exciting new addition is probably a pair of laptops based on the Qualcomm x1e80100 (Snapdragon X1 Elite) chip, the Asus Vivobook S15 and the Lenovo Yoga Slim7x. Other noteworthy new additions are: - A total of 20 Qualcomm based machines, mostly Android devices from Samsung, Motorola and LG, as well as a wireless router and some reference designs - Six NXP i.MX based machines, mostly industrial boards along with some reference designs - Mediatek sees some interesting Filogic based routers including the "OpenWRT One", a few new Chromebooks as well as single-board computers. - Four machines from Solidrun based on Marvell cn913x, replacing the older Armada 8000 based counterparts - The four Amlogic machines are all set top boxes or reference designs for them - The nine new Rockchips machines are mostly single-board computers including some interesting ones based on the rk3588 chip like the ROCK 5 ITX board and the CM3588 with its four NVMe slots - The RISC-V boards are all single-board computers based on Starfive JH7110, Microchip MPFS and Allwinner D1, which all had similar boards already There are also a lot of updates to already supported machines, notably for the TI K3, Rockchips, Freescale and of course Qualcomm platforms" * tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (846 commits) arm64: dts: allwinner: h616: add crypto engine node riscv: dts: add clock generator for Sophgo SG2042 SoC arm64: dts: rockchip: Add Xunlong Orange Pi 3B dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3B arm64: dts: rockchip: Add Radxa ROCK 3B dt-bindings: arm: rockchip: Add Radxa ROCK 3B mailmap: Update Luca Weiss's email address ARM: dts: ixp4xx: nslu2: beeper uses PWM arm64: dts: rockchip: add ROCK 5 ITX board dt-bindings: arm: rockchip: Add ROCK 5 ITX board arm64: dts: rockchip: Add dma-names to uart1 on Pine64 rk3566 devices arm64: dts: rockchip: Add avdd supplies to hdmi on rock64 arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE arm64: dts: qcom: msm8916-lg-m216: Add initial device tree dt-bindings: arm: qcom: Add msm8916 based LG devices ARM: dts: qcom: msm8960: correct memory base arm64: dts: qcom: ipq9574: Add icc provider ability to gcc dt-bindings: interconnect: Add Qualcomm IPQ9574 support arm64: dts: qcom: sm8150: Add video clock controller node arm64: dts: qcom: pm6150: Add vibrator ...
2024-07-15Merge tag 'x86_misc_for_v6.11_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 updates from Borislav Petkov: - Make error checking of AMD SMN accesses more robust in the callers as they're the only ones who can interpret the results properly - The usual cleanups and fixes, left and right * tag 'x86_misc_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kmsan: Fix hook for unaligned accesses x86/platform/iosf_mbi: Convert PCIBIOS_* return codes to errnos x86/pci/xen: Fix PCIBIOS_* return code handling x86/pci/intel_mid_pci: Fix PCIBIOS_* return code handling x86/of: Return consistent error type from x86_of_pci_irq_enable() hwmon: (k10temp) Rename _data variable hwmon: (k10temp) Remove unused HAVE_TDIE() macro hwmon: (k10temp) Reduce k10temp_get_ccd_support() parameters hwmon: (k10temp) Define a helper function to read CCD temperature x86/amd_nb: Enhance SMN access error checking hwmon: (k10temp) Check return value of amd_smn_read() EDAC/amd64: Check return value of amd_smn_read() EDAC/amd64: Remove unused register accesses tools/x86/kcpuid: Add missing dir via Makefile x86, arm: Add missing license tag to syscall tables files
2024-07-15Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: "The biggest part is the virtual CPU hotplug that touches ACPI, irqchip. We also have some GICv3 optimisation for pseudo-NMIs that has been queued via the arm64 tree. Otherwise the usual perf updates, kselftest, various small cleanups. Core: - Virtual CPU hotplug support for arm64 ACPI systems - cpufeature infrastructure cleanups and making the FEAT_ECBHB ID bits visible to guests - CPU errata: expand the speculative SSBS workaround to more CPUs - GICv3, use compile-time PMR values: optimise the way regular IRQs are masked/unmasked when GICv3 pseudo-NMIs are used, removing the need for a static key in fast paths by using a priority value chosen dynamically at boot time ACPI: - 'acpi=nospcr' option to disable SPCR as default console for arm64 - Move some ACPI code (cpuidle, FFH) to drivers/acpi/arm64/ Perf updates: - Rework of the IMX PMU driver to enable support for I.MX95 - Enable support for tertiary match groups in the CMN PMU driver - Initial refactoring of the CPU PMU code to prepare for the fixed instruction counter introduced by Arm v9.4 - Add missing PMU driver MODULE_DESCRIPTION() strings - Hook up DT compatibles for recent CPU PMUs Kselftest updates: - Kernel mode NEON fp-stress - Cleanups, spelling mistakes Miscellaneous: - arm64 Documentation update with a minor clarification on TBI - Fix missing IPI statistics - Implement raw_smp_processor_id() using thread_info rather than a per-CPU variable (better code generation) - Make MTE checking of in-kernel asynchronous tag faults conditional on KASAN being enabled - Minor cleanups, typos" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (69 commits) selftests: arm64: tags: remove the result script selftests: arm64: tags_test: conform test to TAP output perf: add missing MODULE_DESCRIPTION() macros arm64: smp: Fix missing IPI statistics irqchip/gic-v3: Fix 'broken_rdists' unused warning when !SMP and !ACPI ACPI: Add acpi=nospcr to disable ACPI SPCR as default console on ARM64 Documentation: arm64: Update memory.rst for TBI arm64/cpufeature: Replace custom macros with fields from ID_AA64PFR0_EL1 KVM: arm64: Replace custom macros with fields from ID_AA64PFR0_EL1 perf: arm_pmuv3: Include asm/arm_pmuv3.h from linux/perf/arm_pmuv3.h perf: arm_v6/7_pmu: Drop non-DT probe support perf/arm: Move 32-bit PMU drivers to drivers/perf/ perf: arm_pmuv3: Drop unnecessary IS_ENABLED(CONFIG_ARM64) check perf: arm_pmuv3: Avoid assigning fixed cycle counter with threshold arm64: Kconfig: Fix dependencies to enable ACPI_HOTPLUG_CPU perf: imx_perf: add support for i.MX95 platform perf: imx_perf: fix counter start and config sequence perf: imx_perf: refactor driver for imx93 perf: imx_perf: let the driver manage the counter usage rather the user perf: imx_perf: add macro definitions for parsing config attr ...
2024-07-15Merge tag 'cmpxchg.2024.07.12a' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull arm byte cmpxchg from Paul McKenney: "ARM: Provide one-byte cmpxchg emulation This provides emulated one-byte cmpxchg() support for ARM using the cmpxchg_emu_u8() function that uses a four-byte cmpxchg() to emulate the one-byte variant. Similar patches for emulation of one-byte cmpxchg() for arc, sh, and xtensa have not yet received maintainer acks, so they are slated for the v6.12 merge window" * tag 'cmpxchg.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: ARM: Emulate one-byte cmpxchg
2024-07-15ARM: pxa: fix build breakage on PXA3xxDmitry Torokhov
Commit 917195d6f829 ("ARM: pxa: consolidate GPIO chip platform data") tried to reuse the same instance of platform data for PXA25x and PXA27x GPIO controllers by moving it into arch/arm/mach-pxa/devices.c Unfortunately this file is built for other PXA variants which resulted in the following error: >> arm-linux-gnueabi-ld: arch/arm/mach-pxa/devices.o:(.data+0x167c): undefined reference to `gpio_set_wake' Fix this by using #ifdef around PXA25x and PXA27x GPIO controller device structures and associated data. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202407112039.cyyIQ3Js-lkp@intel.com/ Fixes: 917195d6f829 ("ARM: pxa: consolidate GPIO chip platform data") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/broadcom/bnxt/bnxt.c f7ce5eb2cb79 ("bnxt_en: Fix crash in bnxt_get_max_rss_ctx_ring()") 20c8ad72eb7f ("eth: bnxt: use the RSS context XArray instead of the local list") Adjacent changes: net/ethtool/ioctl.c 503757c80928 ("net: ethtool: Fix RSS setting") eac9122f0c41 ("net: ethtool: record custom RSS contexts in the XArray") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-11xen/arm: Convert comma to semicolonChen Ni
Replace a comma between expression statements by a semicolon. Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Message-ID: <20240710014208.1719662-1-nichen@iscas.ac.cn> Signed-off-by: Juergen Gross <jgross@suse.com>
2024-07-10ARM: davinci: Convert comma to semicolonChen Ni
Replace a comma between expression statements by a semicolon. Fixes: efc1bb8a6fd5 ("davinci: add power management support") Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-10clone3: drop __ARCH_WANT_SYS_CLONE3 macroArnd Bergmann
When clone3() was introduced, it was not obvious how each architecture deals with setting up the stack and keeping the register contents in a fork()-like system call, so this was left for the architecture maintainers to implement, with __ARCH_WANT_SYS_CLONE3 defined by those that already implement it. Five years later, we still have a few architectures left that are missing clone3(), and the macro keeps getting in the way as it's fundamentally different from all the other __ARCH_WANT_SYS_* macros that are meant to provide backwards-compatibility with applications using older syscalls that are no longer provided by default. Address this by reversing the polarity of the macro, adding an __ARCH_BROKEN_SYS_CLONE3 macro to all architectures that don't already provide the syscall, and remove __ARCH_WANT_SYS_CLONE3 from all the other ones. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-09Merge tag 'qcom-arm32-for-6.11-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt One more Arm32 DeviceTree update for v6.11 This fixes the DeviceTree validation warning about MSM8960 /memory node not having a unit address. * tag 'qcom-arm32-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: msm8960: correct memory base Link: https://lore.kernel.org/r/20240709191506.3285-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-09ARM: Remove address checking for MMUless devicesYanjun Yang
Commit 169f9102f9198b ("ARM: 9350/1: fault: Implement copy_from_kernel_nofault_allowed()") added the function to check address before use. However, for devices without MMU, addr > TASK_SIZE will always fail. This patch move this function after the #ifdef CONFIG_MMU statement. Signed-off-by: Yanjun Yang <yangyj.ee@gmail.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218953 Fixes: 169f9102f9198b ("ARM: 9350/1: fault: Implement copy_from_kernel_nofault_allowed()") Link: https://lore.kernel.org/r/20240611100947.32241-1-yangyj.ee@gmail.com Signed-off-by: Kees Cook <kees@kernel.org>
2024-07-09ARM: spitz: Use software nodes for the ADS7846 touchscreenLinus Walleij
Convert the Spitz to use software nodes to describe GPIOs for the ADS7846 touchscreen. As part of the conversion switch from the custom wait_for_sync() callback to defining hsync GPIO that can be used by the ads7846 driver to detect hsync. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240628180852.1738922-11-dmitry.torokhov@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-09ARM: spitz: Use software nodes to describe LED GPIOsDmitry Torokhov
Convert Spitz to use software nodes for specifying GPIOs for the LEDs. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240628180852.1738922-10-dmitry.torokhov@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-09ARM: spitz: Use software nodes to describe MMC GPIOsDmitry Torokhov
Convert Spitz to use software nodes for specifying GPIOs for the MMC. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240628180852.1738922-9-dmitry.torokhov@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-09ARM: spitz: Use software nodes to describe LCD GPIOsDmitry Torokhov
Convert Spitz to use software nodes for specifying GPIOs for the LCD. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240628180852.1738922-8-dmitry.torokhov@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-09ARM: spitz: Use software nodes to describe audio GPIOsDmitry Torokhov
Convert Spitz to use software nodes for specifying GPIOs for the audio chip. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240628180852.1738922-7-dmitry.torokhov@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-09ARM: spitz: Use software nodes to describe SPI CS linesLinus Walleij
Convert the Spitz to use software nodes for specifying SPI CS. Because the SPI core can figure out the number of chipselects from the number of GPIO handles specified in properties, setting "num-cs" property is no longer needed. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240628180852.1738922-6-dmitry.torokhov@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-09ARM: spitz: Simplify instantiating SPI controllerDmitry Torokhov
platform_device_register_full() to instantiate SPI controller in one go instead of allocating it, creating a software node, and registering the platform device as separate steps. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240628180852.1738922-5-dmitry.torokhov@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-09ARM: pxa/gumstix: convert vbus gpio to use software nodesDmitry Torokhov
Switch vbus gpios from using a custom GPIO lookup table to software properties using PROPERTY_ENTRY_GPIO() constructs which closely mimic device tree gpio properties. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240628180852.1738922-4-dmitry.torokhov@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-09ARM: pxa: consolidate GPIO chip platform dataDmitry Torokhov
The platform data for the GPIO controllers for the boards using non-DT setup is the same between PXA25x (gumstix) and PXA27x (Spitz) devices. Move it into devices.c to consolidate code. It will help with conversion to software nodes/properties. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240628180852.1738922-3-dmitry.torokhov@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-09ARM: spitz: fix GPIO assignment for backlightDmitry Torokhov
GPIOs controlling backlight on Spitz and Akita are coming from GPIO expanders, not the pxa27xx-gpio block, correct it. Additionally GPIO lookup tables operate with pin numbers rather than legacy GPIO numbers, fix that as well. Use raw numbers instead of legacy GPIO names to avoid confusion. Fixes: ee0c8e494cc3 ("backlight: corgi: Convert to use GPIO descriptors") Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20240628180852.1738922-2-dmitry.torokhov@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-09Merge tag 'tegra-for-6.11-arm-core' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/arm ARM: tegra: Core changes for v6.11-rc1 Uses software nodes to describe rfkill instead of using a GPIO lookup table. * tag 'tegra-for-6.11-arm-core' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: paz00: Use software nodes to describe GPIOs for WiFi rfkill Link: https://lore.kernel.org/r/20240628210818.3627404-2-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-09Merge tag 'imx-defconfig-6.11' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/defconfig i.MX defconfig change for 6.11: - Enable a few drivers needed by TQMa7x/MBa7x and i.MX53 QSB/QSRB in imx_v6_v7_defconfig - Enable IWLWIFI driver support in arm64 defconfig * tag 'imx-defconfig-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: defconfig: Enable the IWLWIFI driver ARM: imx_v6_v7_defconfig: enable DRM_SII902X and DRM_DISPLAY_CONNECTOR ARM: imx_v6_v7_defconfig: Enable drivers for TQMa7x/MBa7x Link: https://lore.kernel.org/r/20240709012534.3106441-1-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-08ARM: multi_v7_defconfig: Add MCP23S08 pinctrl supportChristophe Roullier
Enable MCP23S08 I/O expanders to manage Ethernet PHY reset in STM32MP135F-DK board. Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Link: https://lore.kernel.org/r/20240705134407.2833659-1-alexandre.torgue@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-08Merge tag 'at91-defconfig-6.11' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/defconfig Microchip AT91 defconfig updates for v6.11 It contains: - Enable LVDS serializer support on at91_dt_defconfig * tag 'at91-defconfig-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: configs: at91: Enable LVDS serializer support Link: https://lore.kernel.org/r/20240629173634.664081-1-claudiu.beznea@tuxon.dev Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-08Merge tag 'v6.11-rockchip-dts32-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt Removal of a fallback ethernet-phy compatible that is not conformant to the binding. * tag 'v6.11-rockchip-dts32-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Drop ethernet-phy-ieee802.3-c22 from PHY compatible string on edgeble-neu2 Link: https://lore.kernel.org/r/2169115.3Lj2Plt8kZ@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-08Merge tag 'mvebu-dt-6.11-1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt mvebu dt for 6.11 (part 1) armada-385: Add 7-segment LED display on x530 armada-385: Add Turris Omnia MCU related node armada-370 irqchip DT changes: Drop #size-cells from mpic node orion / kirkwood: few cleanups * tag 'mvebu-dt-6.11-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: dts: turris-omnia: Add GPIO key node for front button ARM: dts: turris-omnia: Add MCU system-controller node ARM: dts: marvell: orion: align LED node name with bindings ARM: dts: marvell: orion5x-lswsgl: use 'gpios' property for LEDs ARM: dts: marvell: orion: drop incorrect address/size-cells in GPIO keys ARM: dts: marvell: orion: align GPIO keys node name with bindings ARM: dts: marvell: kirkwood: align LED node name with bindings ARM: dts: marvell: kirkwood: drop incorrect address/size-cells in GPIO keys ARM: dts: marvell: kirkwood: align GPIO keys node name with bindings ARM: dts: armada-{370-xp,375,38x,39x}: Drop #size-cells from mpic node ARM: dts: marvell: Add 7-segment LED display on x530 Link: https://lore.kernel.org/r/87zfqvixn4.fsf@BLaptop.bootlin.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-08Merge tag 'stm32-dt-for-v6.11-1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt STM32 DT for v6.11, round 1 Highlights: ---------- -MCU: - Add syscfg missing clock on stm32f429. - MPU: - STM32MP13: - Add camera support on stm32mp135f-dk bord using DCMIPP and GC2145 sensor. - Document PWM output for stm32mp135f-dk - Add goodix touchscreen support on stm32mp135f-dk board. - Add new DH DHCOR / DHSBC board (Som + carrier board) based on STM32MP135F SoC. SOM part contains: STM32MP135F SoC, 512MB DDR2L RAM and eMMC/SDIO wifi module. The carrier boards embedds 2 RGMII ETH ports, USB-A,USB-C and an extansion connector. - Add Ethernet controller support on stm32mp135f-dk. It uses LAN8742A PHY based on RMII. - STMP32MP15: - Rework Octavo OSD32MP1 split for USB phy. - Add OP-TEE IRQ for asynchronous notification support. It allows OP-TEE to trig Linux. - STM32MP25: - Add OP-TEE IRQ for asynchronous notification support. It allows OP-TEE to trig Linux. - Enable firewall for RCC. - Add all U(s)ART nodes for stm32mp25. - Add 3 power domains for low power modes. - Add HPDMA support. - Add Ethernet controller (ETH2) support on stm32mp257f-ev1. It uses Realtek PHY based on RGMII. - Add and enable SCMI regulator support. * tag 'stm32-dt-for-v6.11-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (31 commits) arm64: dts: st: describe power supplies for stm32mp257f-ev1 board arm64: dts: st: add scmi regulators on stm32mp25 regulator: Add STM32MP25 regulator bindings ARM: dts: stm32: omit unused pinctrl groups from stm32mp13 dtb files arm64: dts: st: enable Ethernet2 on stm32mp257f-ev1 board arm64: dts: st: add eth2 pinctrl entries in stm32mp25-pinctrl.dtsi arm64: dts: st: add ethernet1 and ethernet2 support on stm32mp25 arm64: dts: st: add HPDMA nodes on stm32mp251 ARM: dts: stm32: Add ethernet support for DH STM32MP13xx DHCOR DHSBC board ARM: dts: stm32: order stm32mp13-pinctrl nodes ARM: dts: stm32: add ethernet1 for STM32MP135F-DK board ARM: dts: stm32: add ethernet1/2 RMII pins for STM32MP13F-DK board ARM: dts: stm32: add ethernet1 and ethernet2 support on stm32mp13 ARM: dts: stm32: Document output pins for PWMs on stm32mp135f-dk ARM: dts: stm32: OP-TEE async notif interrupt for ST STM32MP15x boards ARM: dts: stm32: Missing clocks for stm32f429's syscfg. ARM: dts: stm32: Add support for STM32MP13xx DHCOR SoM and DHSBC board ARM: dts: stm32: Add pinmux nodes for DH electronics STM32MP13xx DHCOR SoM and DHSBC board dt-bindings: arm: stm32: Add compatible string for DH electronics STM32MP13xx DHCOR DHSBC board ARM: dts: stm32: osd32: move pwr_regulators to common ... Link: https://lore.kernel.org/r/8f10bd29-d067-4060-89ff-2e1a605f3141@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-08Merge tag 'qcom-arm32-for-6.11' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm Arm32 DeviceTree updates for v6.11 This introduces new support for the Sony Xperia Z3 Compact, HTC One (M8), Samsung Galaxy Tab 4 8.0 Wi-Fi, Samsung Galaxy Grand 2, and Samsung Galaxy Note 3 devices. The Motorola Moto G and Motorola Moto G 4G gains accelerometer and magnetometer support, with the latter also getting framebuffer supplies and a temperature sensor wired up. The SMBB (charger block) is enabled across all MSM8x26 Lumia devices, as this is used for USB state changes. The operating mode for SDC regulator is set to HPM on Sony Xperia "Shinano" family to avoid brownouts on uSD-cards. The panel on LGE Nexus 5 is connected to the backlight, to make this turn off on blanking. MSM8974 is transitioned to use the mailbox-abstraction for invoking PC interrupts on remote processors. * tag 'qcom-arm32-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (24 commits) ARM: dts: qcom: qcom-msm8226-samsung-ms013g: Add initial device tree ARM: dts: qcom: apq8064: drop incorrect ranges from QFPROM ARM: dts: qcom: msm8926-motorola-peregrine: Add framebuffer supplies ARM: dts: qcom: msm8926-motorola-peregrine: Update temperature sensor ARM: dts: qcom: msm8926-motorola-peregrine: Add accelerometer, magnetometer, regulator ARM: dts: qcom: msm8974: Use mboxes in smsm node ARM: dts: qcom: msm8974-sony-shinano: increase load on l21 for sdhc2 ARM: dts: qcom: Add Sony Xperia Z3 Compact smartphone ARM: dts: qcom: use generic node names for Adreno and QFPROM ARM: dts: qcom: motorola-falcon: add accelerometer, magnetometer ARM: dts: qcom: Add initial support for HTC One (M8) ARM: dts: qcom: msm8974: Use mboxes properties for APCS ARM: dts: qcom: mdm9615: drop #power-domain-cells property of GCC ARM: dts: qcom: ipq8064: drop #power-domain-cells property of GCC ARM: dts: qcom: ipq4019: drop #power-domain-cells property of GCC ARM: dts: qcom: msm8960: drop #power-domain-cells property of GCC ARM: dts: qcom: msm8660: drop #power-domain-cells property of GCC ARM: dts: qcom: apq8064: drop #power-domain-cells property of GCC ARM: dts: qcom: msm8974: Use proper compatible for APCS syscon ARM: dts: qcom: msm8974-hammerhead: Update gpio hog node name ... Link: https://lore.kernel.org/r/20240705032926.13333-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-08ARM: dts: ixp4xx: nslu2: beeper uses PWMLinus Walleij
The beeper in the NSLU2 is just a GPIO connected to a speaker, so we need to use PWM on the GPIO to get any kind of sound out. Tested with some random beeps by enabling INPUT_EVDEV and running beep.c with e.g. beep 400 for a 400 Hz tone. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/20240627-ixp4xx-dts-v1-1-cdbbe1150873@linaro.org Link: https://lore.kernel.org/r/20240703-ixp4xx-dts-v1-1-e5149da36f6e@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-08Merge tag 'sunxi-dt-for-6.11' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt Allwinner SoC device tree changes for 6.11 This includes a commit shared with the clk tree. This commit adds clock and reset indices to the device tree binding, and thus is needed for both the device tree and driver changes. ARM64 device tree and binding-only changes - Add LRADC (low resolution ADC for resistor network based keys) for H616 SoC - Add cache information for A64, H6, and H616 SoCs - Correct model names and descriptions for Pine64 boards - Add GPADC (general purpose ADC) for H616 SoC - Add ADC joysticks based on GPADC for anbernic-rg35xx-h board - Add additional CPU OPPs for the H700 on top of existing H616 ones - Enable DVFS for rg35xx boards - Add IOMMU for H616 SoC RISC-V device tree changes - Add system LDOs to D1s/T113 SoC - Add ClockworkPi and DevTerm device trees * tag 'sunxi-dt-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: riscv: dts: allwinner: Add ClockworkPi and DevTerm devicetrees riscv: dts: allwinner: d1s-t113: Add system LDOs arm64: dts: allwinner: h616: add IOMMU node arm64: dts: allwinner: rg35xx: Enable DVFS CPU frequency scaling arm64: dts: allwinner: h616: add additional CPU OPPs for the H700 arm64: dts: allwinner: anbernic-rg35xx-h: Add ADC joysticks arm64: dts: allwinner: h616: Add GPADC device node dt-bindings: clock: sun50i-h616-ccu: Add GPADC clocks ARM: dts: sunxi: remove duplicated entries in makefile arm64: dts: allwinner: Add cache information to the SoC dtsi for H616 arm64: dts: allwinner: Add cache information to the SoC dtsi for A64 arm64: dts: allwinner: Correct the model names for Pine64 boards dt-bindings: arm: sunxi: Correct the descriptions for Pine64 boards arm64: dts: allwinner: Add cache information to the SoC dtsi for H6 ARM: dts: sun50i: Add LRADC node dt-bindings: input: sun4i-lradc-keys: Add H616 compatible Link: https://lore.kernel.org/r/ZoQa8r1N8yi7FlPV@wens.tw Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-08Merge tag 'imx-dt-6.11' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX ARM device tree change for 6.11: - A few changes from Krzysztof Kozlowski to fix dtschema issues - A series from Michael Walle to improve kontron-samx6i SoM support by fixing various errors and add kontron-samx6i-ads2 board - Add LVDS port data mapping for M53 Menlo board - Convert NVMEM usage to layout syntax on MBA6 boards * tag 'imx-dt-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6qdl-kontron-samx6i: add actual device trees ARM: dts: imx6qdl-kontron-samx6i: remove wake-up-gpio property ARM: dts: imx6qdl-kontron-samx6i: fix PCIe reset polarity ARM: dts: imx6qdl-kontron-samx6i: fix node names ARM: dts: imx6qdl-kontron-samx6i: add SDIO_PWR_EN support ARM: dts: imx6qdl-kontron-samx6i: always enable eMMC ARM: dts: imx6qdl-kontron-samx6i: fix product name ARM: dts: imx6qdl-kontron-samx6i: fix SPI0 chip selects ARM: dts: imx6qdl-kontron-samx6i: cleanup the PMIC node ARM: dts: imx6qdl-kontron-samx6i: fix board reset ARM: dts: imx6qdl-kontron-samx6i: fix PHY reset ARM: dts: imx6qdl-kontron-samx6i: fix phy-mode ARM: dts: nxp: imx6: convert NVMEM content to layout syntax ARM: dts: e60k02: fix aliases for mmc ARM: dts: imx: Add LVDS port data mapping on M53 Menlo ARM: dts: imx28-tx28: drop redundant 'panel-name' property ARM: dts: imx: drop redundant 'u-boot,panel-name' property ARM: dts: imx6dl-aristainetos2_4: drop redundant 'power-on-delay' property ARM: dts: imx: correct choice of panel native mode ARM: dts: imx: align panel timings node name with dtschema Link: https://lore.kernel.org/r/20240702142153.413061-3-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-08Merge tag 'dt-cleanup-6.11' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt Minor improvements in ARM DTS for v6.11 Few cleanups and improvements which were missed by their maintainers: 1. Add Krzysztof as odd-fixer for old ARM platforms: Alphascale, AXM LSI, Moxa, TI Nspire and VT8500 (with Alexey Charkov). 2. VT8500: align node names with bindings (USB, panel timings). 3. Cirrus: align node names with bindings (panel timings). 4. TI Nspire: correct unit addresses, correct watchdog compatible and properties while making it disabled (never tested). 5. Nuvoton, Aspeed: align node names with bindings (I2C). IMPORTANT: At least for Aspeed it is known to affect some user-space tools, because that user-space looks for specific node path via /sys/firmware/devicetree. The /sys/firmware/devicetree is not the ABI and any user-space relying on it: - Prevents any changes in DTS, e.g. node renaming or moving, changing unit addresses (re-arranging child bus addressing). - Is using undocumented interface. - Is neither reliable nor understandable. 6. TI OMAP and Davinci: align node names with bindings (panel timings), drop incorrect property. 7. STI: document in bindings codec child to fix dtbs_checks. * tag 'dt-cleanup-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt: ARM: dts: omap am5729-beagleboneai: drop unneeded ti,enable-id-detection dt-bindings: soc: sti: st,sti-syscon: document codec node ARM: dts: ti: align panel timings node name with dtschema arm: dts: aspeed: Use standard 'i2c' bus node name arm: dts: nuvoton: Use standard 'i2c' bus node name MAINTAINERS: ARM: alphascale: add Krzysztof Kozlowski as maintainer ARM: dts: nspire: Add full compatible for watchdog node ARM: dts: nspire: Add unit name addresses to memory nodes MAINTAINERS: ARM: nspire: add Krzysztof Kozlowski as maintainer MAINTAINERS: ARM: vt8500: add Alexey and Krzysztof as maintainers MAINTAINERS: ARM: axm: add Krzysztof Kozlowski as maintainer MAINTAINERS: ARM: moxa: add Krzysztof Kozlowski as maintainer ARM: dts: cirrus: align panel timings node name with dtschema ARM: dts: vt8500: align panel timings node name with dtschema ARM: dts: vt8500: replace "uhci" nodename with generic name "usb" Link: https://lore.kernel.org/r/20240702065359.7378-2-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-07-06ARM: dts: qcom: msm8960: correct memory baseDavid Heidelberg
DeviceTree validation requires a unit address on the memory node, adjust the base to match [Ref] and use this as unit address. The bootloader will update the information with the actual values during boot. Ref: https://github.com/msm8916-mainline/lk2nd/blob/main/target/msm8960/rules.mk Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: David Heidelberg <david@ixit.cz> Link: https://lore.kernel.org/r/20240706220041.241839-1-david@ixit.cz Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-07-05ARM: dts: turris-omnia: Add GPIO key node for front buttonMarek Behún
Now that we have the MCU device-tree node, which acts as a GPIO controller, add GPIO key node for the front button. Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-07-05ARM: dts: turris-omnia: Add MCU system-controller nodeMarek Behún
Turris Omnia's MCU provides various features that can be configured over I2C at address 0x2a. Add device-tree node. This does not carry a Fixes tag - we do not want this to get backported to stable kernels for the following reason: U-Boot since v2022.10 inserts a phy-reset-gpio property into the WAN ethernet node pointing to the MCU node if it finds the MCU node with a cznic,turris-omnia-mcu compatible. Thus if this change got backported to a stable kernel, the WAN interface driver would defer probe indefinitely (since it would wait for the turris-omnia-mcu driver which would not be present). Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2024-07-05ARM: dts: stm32: omit unused pinctrl groups from stm32mp13 dtb filesAlexandre Torgue
stm32mp13-pinctrl.dtsi contains nearly all pinctrl groups collected from all boards. Most of them end up unused by a board and only waste binary space. Add /omit-if-no-ref/ to the groups to scrub the unused groups from the dtbs. Use the following regex to update the file and drop two useless newlines too: s@^\t[^:]\+: [^ ]\+ {$@\t/omit-if-no-ref/\r&@ Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-07-05ARM: dts: stm32: Add ethernet support for DH STM32MP13xx DHCOR DHSBC boardMarek Vasut
Add ethernet support for the DH STM32MP13xx DHCOR DHSBC carrier board. This carrier board is populated with two gigabit ethernet ports and two Realtek RTL8211F PHYs, both are described in this DT patch. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-07-05ARM: dts: stm32: order stm32mp13-pinctrl nodesAlexandre Torgue
Keep alphabetic order for pins definition nodes for a better read. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-07-05ARM: dts: stm32: add ethernet1 for STM32MP135F-DK boardChristophe Roullier
Ethernet1: RMII with crystal Ethernet2: RMII with no cristal, need "phy-supply" property to work, today this property was managed by Ethernet glue, but should be present and managed in PHY node. So I will push second Ethernet in next step. PHYs used are SMSC (LAN8742A) Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-07-05ARM: dts: stm32: add ethernet1/2 RMII pins for STM32MP13F-DK boardChristophe Roullier
Those pins are used for Ethernet 1 and 2 on STM32MP13F-DK board. ethernet1: RMII with crystal. ethernet2: RMII without crystal. Add analog gpio pin configuration ("sleep") to manage power mode on stm32mp13. Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-07-05ARM: dts: stm32: add ethernet1 and ethernet2 support on stm32mp13Christophe Roullier
Both instances ethernet based on GMAC SNPS IP on stm32mp13. GMAC IP version is SNPS 4.20. Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-07-05ARM: dts: stm32: Document output pins for PWMs on stm32mp135f-dkUwe Kleine-König
To simplify identifying the pins where the PWM output is routed to, add a comment to each PWM device about the respective pin on the expansion connector. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-07-05ARM: dts: stm32: OP-TEE async notif interrupt for ST STM32MP15x boardsEtienne Carriere
Define the GIC interrupt (PPI 15) to be used on ST STM32MP15x boards for OP-TEE async notif. Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-11-25 09:14:16 +0000