Age | Commit message (Collapse) | Author |
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux
Pull oprofile and dcookies removal from Viresh Kumar:
"Remove oprofile and dcookies support
The 'oprofile' user-space tools don't use the kernel OPROFILE support
any more, and haven't in a long time. User-space has been converted to
the perf interfaces.
The dcookies stuff is only used by the oprofile code. Now that
oprofile's support is getting removed from the kernel, there is no
need for dcookies as well.
Remove kernel's old oprofile and dcookies support"
* tag 'oprofile-removal-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux:
fs: Remove dcookies support
drivers: Remove CONFIG_OPROFILE support
arch: xtensa: Remove CONFIG_OPROFILE support
arch: x86: Remove CONFIG_OPROFILE support
arch: sparc: Remove CONFIG_OPROFILE support
arch: sh: Remove CONFIG_OPROFILE support
arch: s390: Remove CONFIG_OPROFILE support
arch: powerpc: Remove oprofile
arch: powerpc: Stop building and using oprofile
arch: parisc: Remove CONFIG_OPROFILE support
arch: mips: Remove CONFIG_OPROFILE support
arch: microblaze: Remove CONFIG_OPROFILE support
arch: ia64: Remove rest of perfmon support
arch: ia64: Remove CONFIG_OPROFILE support
arch: hexagon: Don't select HAVE_OPROFILE
arch: arc: Remove CONFIG_OPROFILE support
arch: arm: Remove CONFIG_OPROFILE support
arch: alpha: Remove CONFIG_OPROFILE support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for
5.12-rc1.
It's been an active set of development in these subsystems for the
past few months:
- loads of typec features added for new hardware
- xhci features and bugfixes
- dwc3 features added for more hardware support
- dwc2 fixes and new hardware support
- cdns3 driver updates for more hardware support
- gadget driver cleanups and minor fixes
- usb-serial fixes, new driver, and more devices supported
- thunderbolt feature additions for new hardware
- lots of other tiny fixups and additions
The chrome driver changes are in here as well, as they depended on
some of the typec changes, and the maintainer acked them.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (300 commits)
dt-bindings: usb: mediatek: musb: add mt8516 compatbile
dt-bindings: usb: mtk-xhci: add compatible for mt2701 and mt7623
dt-bindings: usb: mtk-xhci: add optional assigned clock properties
Documentation: connector: Update the description of sink-vdos
usb: misc: usb3503: Fix logic in usb3503_init()
dt-bindings: usb: usb-device: fix typo in required properties
usb: Replace lkml.org links with lore
dt-bindings: usb: dwc3: add description for rk3328
dt-bindings: usb: convert rockchip,dwc3.txt to yaml
usb: quirks: add quirk to start video capture on ELMO L-12F document camera reliable
USB: quirks: sort quirk entries
USB: serial: drop bogus to_usb_serial_port() checks
USB: serial: make remove callback return void
USB: serial: drop if with an always false condition
usb: gadget: Assign boolean values to a bool variable
usb: typec: tcpm: Get Sink VDO from fwnode
dt-bindings: connector: Add SVDM VDO properties
usb: typec: displayport: Fill the negotiated SVDM Version in the header
usb: typec: ucsi: Determine common SVDM Version
usb: typec: tcpm: Determine common SVDM Version
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann:
"After the last release contained a surprising amount of new 32-bit
machines, this time two thirds of the code changes are for 64-bit.
The usual updates to existing files include:
- Device tree compiler warning fixes for Berlin, Renesas, SoCFPGA,
nomadik, stm32, Allwinner, TI Keystone
- Support for additional devices on existing machines on Renesas,
SoCFPGA, at91, hisilicon, OMAP, Tegra, TI K3, Allwinner, Broadcom,
ux500, Mediatek, Marvell Armada, Marvell MMP, ZynqMP, AMLogic,
Qualcomm, i.MX, Layerscape, Actions, ASpeed, Toshiba
- Cleanups and minor fixes for Renesas, at91, mstar, ux500, Samsung,
stm32, Tegra, Broadcom, Mediatek, Marvell MMP, AMLogic, Qualcomm,
i.MX, Rockchip, ASpeed, Zynq
Only three new SoCs this time, but a number of boards across:
Renesas:
- Two Beacon EmbeddedWorks boards (RZ/G2H and RZ/G2N based)
Intel SoCFPGA:
- eASIC N5X board (N5X)
ST-Ericsson Ux500:
- Samsung GT-I9070 (Janice) phone (u8500)
TI OMAP:
- MYIR Tech Limited development board (AM335X)
Allwinner/sunxi:
- SL631 Action Camera (V3)
- PineTab Early Adopter tablet (A64)
Broadcom:
- BCM4906 networking chip
- Netgear R8000P router (BCM4906)
AMLogic:
- Hardkernel ODROID-HC4 development board (SM1)
- Beelink GS-King-X TV Box (S922X)
Qualcomm:
- Snapdragon 888 / SM8350 high-end phone SoC
- Qualcomm SDX55 5G modem as standalone SoC
- Snapdragon MTP reference board (SM8350)
- Snapdragon MTP reference board (SDX55)
- Sony Kitakami phones: Xperia Z3+/Z4/Z5 (APQ8094)
- Alcatel Idol 3 phone (MSM8916)
- ASUS Zenfone 2 Laser phone (MSM8916)
- BQ Aquaris X5 aka Longcheer L8910 phone (MSM8916)
- OnePlus6 phone (SDM845)
- OnePlus6T phone (SDM845)
- Alfa Network AP120C-AC access point (IPQ4018)
NXP i.MX6 (32-bit):
- Plymovent BAS base system controller for filter systems (imx6dl)
- Protonic MVT industrial touchscreen terminals (imx6dl)
- Protonic PRTI6G reference board (imx6ul)
- Kverneland UT1, UT1Q, UT1P, TGO agricultural terminals (imx6q/dl/qp)
NXP i.MX8 (64-bit)
- Beacon i.MX8M Nano development kit (imx8mn)
- Boundary Devices i.MX8MM Nitrogen SBC (imx8mm)
- Gateworks Venice i.MX 8M Mini Development Kits (imx8mm)
- phyBOARD-Pollux-i.MX8MP (imx8mp)
- Purism Librem5 Evergreen phone (imx8mp)
- Kontron SMARC-sAL28 system-on-module(imx8mp)
Rockchip:
- NanoPi M4B Single-board computer (RK3399)
- Radxa Rock Pi E router SBC (RK3328)
ASpeed:
- Ampere Mt. Jade, a BMC for an x86 server (AST2500)
- IBM Everest, a BMC for a Power10 server (AST2600)
- Supermicro x11spi, a BMC for an ARM server (AST2500)
Zynq:
- Ebang EBAZ4205, FPGA board (Zynq-7000)
- ZynqMP zcu104 revC reference platform (ZynqMP)"
* tag 'arm-dt-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (584 commits)
ARM: dts: aspeed: align GPIO hog names with dtschema
ARM: dts: aspeed: fix PCA95xx GPIO expander properties on Portwell
dt-bindings: spi: zynq: Convert Zynq QSPI binding to yaml
arm: dts: visconti: Add DT support for Toshiba Visconti5 GPIO driver
ARM: dts: aspeed: ast2600evb: Add enable ehci and uhci
ARM: dts: aspeed: mowgli: Add i2c rtc device
ARM: dts: aspeed: amd-ethanolx: Enable secondary LPC snooping address
dt-bindings: arm: xilinx: Add missing Zturn boards
ARM: dts: ebaz4205: add pinctrl entries for switches
ARM: dts: add Ebang EBAZ4205 device tree
dt-bindings: arm: add Ebang EBAZ4205 board
dt-bindings: add ebang vendor prefix
ARM: dts: aspeed: Add Everest BMC machine
ARM: dts: aspeed: inspur-fp5280g2: Add ipsps1 driver
ARM: dts: aspeed: inspur-fp5280g2: Add GPIO line names
ARM: dts: aspeed: Add Supermicro x11spi BMC machine
ARM: dts: aspeed: g220a: Fix some gpio
ARM: dts: aspeed: g220a: Enable ipmb
ARM: dts: aspeed: rainier: Add eMMC clock phase compensation
ARM: dts: aspeed: Add LCLK to lpc-snoop
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"As usual, a number of additional device drivers that were added to the
kernel are now enabled in the respective configuration files.
A few of the files get updated to match the current Kconfig files for
removed or renamed options"
* tag 'arm-defconfig-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
ARM: configs: sama5_defconfig: add QSPI driver
ARM: configs: at91_dt_defconfig: add ov7740 module
ARM: configs: at91_dt_defconfig: add useful helper options
ARM: configs: at91: DT/ATAG defconfig modifications
ARM: configs: sama5_defconfig: update and remove unneeded options
ARM: configs: at91: enable drivers for sam9x60
arm64: defconfig: Enable RT5659
arm64: configs: Support DEVAPC on MediaTek platforms
arm64: configs: Support pwrap on Mediatek MT6779 platform
arm64: defconfig: Enable PF8x00 as builtin
ARM: multi_v7_defconfig: add STM32 CEC support
arm64: defconfig: Enable vibra-pwm
ARM: omap2plus_defconfig: Update for dropped options
ARM: omap2plus_defconfig: Update for moved options
ARM: multi_v7_defconfig: Enable nvmem's rmem driver
arm64: defconfig: Enable nvmem's rmem driver
ARM: multi_v7_defconfig: Enable support for the ADC thermal sensor
ARM: qcom_defconfig: Enable Command DB driver
ARM: qcom_defconfig: Enable RPMh power domain driver
ARM: qcom_defconfig: Enable ARM PSCI support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"This is mostly 32-bit code for SoC platforms, and looks smaller than
any such branch I remember from previous kernels, as most of this is
now handled in other subsystems for modern platforms:
- Minor bugfixes and Kconfig updates for Tegra, Broadcom, i.MX,
Renesas, and Samsung
- Updates to the MAINTAINERS listing for Actions, OMAP, and Samsung
- Samsung SoC driver updates to make them loadable modules"
* tag 'arm-soc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: arm: samsung: include S3C headers in platform entry
MAINTAINERS: Add linux-actions ML for Actions Semi Arch
ARM: s3c: irq-s3c24xx: staticize local functions
ARM: s3c: irq-s3c24xx: include headers for missing declarations
ARM: s3c: fix fiq for clang IAS
ARM: imx: Remove unused IMX_GPIO_NR() macro
soc: renesas: rcar-sysc: Mark device node OF_POPULATED after init
ARM: OMAP2+: fix spellint typo
MAINTAINERS: Update address for OMAP GPMC driver
soc: renesas: rcar-sysc: Use readl_poll_timeout_atomic()
ARM: bcm: Select BRCMSTB_L2_IRQ for bcm2835
ARM: brcmstb: Add debug UART entry for 72116
ARM: tegra: Don't enable unused PLLs on resume from suspend
soc: samsung: pm_domains: Convert to regular platform driver
soc: samsung: exynos-chipid: correct helpers __init annotation
ARM: mach-imx: imx6ul: Print SOC revision on boot
ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup
soc: samsung: exynos-chipid: convert to driver and merge exynos-asv
soc: samsung: exynos-asv: handle reading revision register error
soc: samsung: exynos-asv: don't defer early on not-supported SoCs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform removals from Arnd Bergmann:
"There are a lot of platforms that have not seen any interesting code
changes in the past five years or more.
I made a list and asked around which ones are no longer in use, and
received confirmation about six ARM platforms and the TI C6x
architecture that have all reached the end of their life upstream,
with no known users remaining:
- efm32 - added in 2011, first Cortex-M, no notable changes after 2013
- picoxcell - added in 2011, abandoned after 2012 acquisition
- prima2 - added in 20111, no notable changes since 2015
- tango - added in 2015, sporadic changes until 2017, but abandoned
- u300 - added in 2009, no notable changes since 2013
- zx - added in 2015 for both 32, 2017 for 64 bit, no notable changes
- arch/c6x - added in 2011, but work stalled soon after that
A number of other platforms on the original list turned out to still
have users. In some cases there are out-of-tree patches and users that
plan to contribute them in the future, in other cases the code is
complete and works reliably"
Link: https://lore.kernel.org/lkml/CAK8P3a2DZ8xQp7R=H=wewHnT2=a_=M53QsZOueMVEf7tOZLKNg@mail.gmail.com/
* tag 'arm-platform-removal-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: remove u300 platform
ARM: remove tango platform
ARM: remove zte zx platform
ARM: remove sirf prima2/atlas platforms
c6x: remove architecture
MAINTAINERS: Remove deleted platform efm32
ARM: drop efm32 platform
ARM: Remove PicoXcell platform support
ARM: dts: Remove PicoXcell platforms
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There are only two left-over remaining non-urgent ARM SoC bug fixes:
- A build fix for the Atmel SAM9 platform to allow building with the
clang integrated assembler
- A DT fix for ethernet on Intel SoCFPGA, this has been broken since
it was added in v5.4"
* tag 'arm-fixes-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: at91: use proper asm syntax in pm_suspend
arm64: dts: agilex: fix phy interface bit shift for gmac1 and gmac2
|
|
Pull networking updates from David Miller:
"Here is what we have this merge window:
1) Support SW steering for mlx5 Connect-X6Dx, from Yevgeny Kliteynik.
2) Add RSS multi group support to octeontx2-pf driver, from Geetha
Sowjanya.
3) Add support for KS8851 PHY. From Marek Vasut.
4) Add support for GarfieldPeak bluetooth controller from Kiran K.
5) Add support for half-duplex tcan4x5x can controllers.
6) Add batch skb rx processing to bcrm63xx_enet, from Sieng Piaw
Liew.
7) Rework RX port offload infrastructure, particularly wrt, UDP
tunneling, from Jakub Kicinski.
8) Add BCM72116 PHY support, from Florian Fainelli.
9) Remove Dsa specific notifiers, they are unnecessary. From Vladimir
Oltean.
10) Add support for picosecond rx delay in dwmac-meson8b chips. From
Martin Blumenstingl.
11) Support TSO on xfrm interfaces from Eyal Birger.
12) Add support for MP_PRIO to mptcp stack, from Geliang Tang.
13) Support BCM4908 integrated switch, from Rafał Miłecki.
14) Support for directly accessing kernel module variables via module
BTF info, from Andrii Naryiko.
15) Add DASH (esktop and mobile Architecture for System Hardware)
support to r8169 driver, from Heiner Kallweit.
16) Add rx vlan filtering to dpaa2-eth, from Ionut-robert Aron.
17) Add support for 100 base0x SFP devices, from Bjarni Jonasson.
18) Support link aggregation in DSA, from Tobias Waldekranz.
19) Support for bitwidse atomics in bpf, from Brendan Jackman.
20) SmartEEE support in at803x driver, from Russell King.
21) Add support for flow based tunneling to GTP, from Pravin B Shelar.
22) Allow arbitrary number of interconnrcts in ipa, from Alex Elder.
23) TLS RX offload for bonding, from Tariq Toukan.
24) RX decap offklload support in mac80211, from Felix Fietkou.
25) devlink health saupport in octeontx2-af, from George Cherian.
26) Add TTL attr to SCM_TIMESTAMP_OPT_STATS, from Yousuk Seung
27) Delegated actionss support in mptcp, from Paolo Abeni.
28) Support receive timestamping when doin zerocopy tcp receive. From
Arjun Ray.
29) HTB offload support for mlx5, from Maxim Mikityanskiy.
30) UDP GRO forwarding, from Maxim Mikityanskiy.
31) TAPRIO offloading in dsa hellcreek driver, from Kurt Kanzenbach.
32) Weighted random twos choice algorithm for ipvs, from Darby Payne.
33) Fix netdev registration deadlock, from Johannes Berg.
34) Various conversions to new tasklet api, from EmilRenner Berthing.
35) Bulk skb allocations in veth, from Lorenzo Bianconi.
36) New ethtool interface for lane setting, from Danielle Ratson.
37) Offload failiure notifications for routes, from Amit Cohen.
38) BCM4908 support, from Rafał Miłecki.
39) Support several new iwlwifi chips, from Ihab Zhaika.
40) Flow drector support for ipv6 in i40e, from Przemyslaw Patynowski.
41) Support for mhi prrotocols, from Loic Poulain.
42) Optimize bpf program stats.
43) Implement RFC6056, for better port randomization, from Eric
Dumazet.
44) hsr tag offloading support from George McCollister.
45) Netpoll support in qede, from Bhaskar Upadhaya.
46) 2005/400g speed support in bonding 3ad mode, from Nikolay
Aleksandrov.
47) Netlink event support in mptcp, from Florian Westphal.
48) Better skbuff caching, from Alexander Lobakin.
49) MRP (Media Redundancy Protocol) offloading in DSA and a few
drivers, from Horatiu Vultur.
50) mqprio saupport in mvneta, from Maxime Chevallier.
51) Remove of_phy_attach, no longer needed, from Florian Fainelli"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1766 commits)
octeontx2-pf: Fix otx2_get_fecparam()
cteontx2-pf: cn10k: Prevent harmless double shift bugs
net: stmmac: Add PCI bus info to ethtool driver query output
ptp: ptp_clockmatrix: clean-up - parenthesis around a == b are unnecessary
ptp: ptp_clockmatrix: Simplify code - remove unnecessary `err` variable.
ptp: ptp_clockmatrix: Coding style - tighten vertical spacing.
ptp: ptp_clockmatrix: Clean-up dev_*() messages.
ptp: ptp_clockmatrix: Remove unused header declarations.
ptp: ptp_clockmatrix: Add alignment of 1 PPS to idtcm_perout_enable.
ptp: ptp_clockmatrix: Add wait_for_sys_apll_dpll_lock.
net: stmmac: dwmac-sun8i: Add a shutdown callback
net: stmmac: dwmac-sun8i: Minor probe function cleanup
net: stmmac: dwmac-sun8i: Use reset_control_reset
net: stmmac: dwmac-sun8i: Remove unnecessary PHY power check
net: stmmac: dwmac-sun8i: Return void from PHY unpower
r8169: use macro pm_ptr
net: mdio: Remove of_phy_attach()
net: mscc: ocelot: select PACKING in the Kconfig
net: re-solve some conflicts after net -> net-next merge
net: dsa: tag_rtl4_a: Support also egress tags
...
|
|
dtschema for pca95xx expects GPIO hogs to end with 'hog' suffix.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20210212162640.66677-2-krzk@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The PCA95xx GPIO expander requires GPIO controller properties to operate
properly.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210212162640.66677-1-krzk@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A single fix for an issue introduced this development cycle: when
running as a Xen guest on Arm systems the kernel will hang during
boot"
* tag 'for-linus-5.11-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
arm/xen: Don't probe xenbus as part of an early initcall
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc
Samsung mach/soc changes for v5.12
Three fixes for S3C24xx: one for building with clang and two for
warnings.
* tag 'samsung-soc-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: s3c: irq-s3c24xx: staticize local functions
ARM: s3c: irq-s3c24xx: include headers for missing declarations
ARM: s3c: fix fiq for clang IAS
Link: https://lore.kernel.org/r/20210211082254.7934-1-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into arm/dt
ARM: dts: Zynq DT changes for v5.12-v2
- Add Ebang board support
- Add missing zturn boards in dt binding
- And convert Zynq QSPI binding
* tag 'zynq-dt-for-v5.12-v2' of https://github.com/Xilinx/linux-xlnx:
dt-bindings: spi: zynq: Convert Zynq QSPI binding to yaml
dt-bindings: arm: xilinx: Add missing Zturn boards
ARM: dts: ebaz4205: add pinctrl entries for switches
ARM: dts: add Ebang EBAZ4205 device tree
dt-bindings: arm: add Ebang EBAZ4205 board
dt-bindings: add ebang vendor prefix
Link: https://lore.kernel.org/r/19e0e0c9-1bed-bba5-6c80-6903937b3d96@xilinx.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt
ASPEED device tree updates for 5.12
- New machines
* Ampere Mt. Jade, an AST2500 BMC for an x86 server
* IBM Everest, an AST2600 BMC for a Power10 server
* Supermicro x11spi, an AST2500 BMC for an ARM server
- AST2600 eMMC clock phase configuration
- Proper clock support for LPC snoop
- Misc updates to ethanolx, mowgli, ast2600evb, g220a, and rainier
* tag 'aspeed-5.12-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: dts: aspeed: ast2600evb: Add enable ehci and uhci
ARM: dts: aspeed: mowgli: Add i2c rtc device
ARM: dts: aspeed: amd-ethanolx: Enable secondary LPC snooping address
ARM: dts: aspeed: Add Everest BMC machine
ARM: dts: aspeed: inspur-fp5280g2: Add ipsps1 driver
ARM: dts: aspeed: inspur-fp5280g2: Add GPIO line names
ARM: dts: aspeed: Add Supermicro x11spi BMC machine
ARM: dts: aspeed: g220a: Fix some gpio
ARM: dts: aspeed: g220a: Enable ipmb
ARM: dts: aspeed: rainier: Add eMMC clock phase compensation
ARM: dts: aspeed: Add LCLK to lpc-snoop
ARM: dts: aspeed: Add device tree for Ampere's Mt. Jade BMC
Link: https://lore.kernel.org/r/CACPK8XfQgGch5bK3YD0La+CE2L5DxVa1MNw6m1fc40j0w7e9Tw@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
After Commit 3499ba8198cad ("xen: Fix event channel callback via
INTX/GSI"), xenbus_probe() will be called too early on Arm. This will
recent to a guest hang during boot.
If the hang wasn't there, we would have ended up to call
xenbus_probe() twice (the second time is in xenbus_probe_initcall()).
We don't need to initialize xenbus_probe() early for Arm guest.
Therefore, the call in xen_guest_init() is now removed.
After this change, there is no more external caller for xenbus_probe().
So the function is turned to a static one. Interestingly there were two
prototypes for it.
Cc: stable@vger.kernel.org
Fixes: 3499ba8198cad ("xen: Fix event channel callback via INTX/GSI")
Reported-by: Ian Jackson <iwj@xenproject.org>
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20210210170654.5377-1-julien@xen.org
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
|
|
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Link: https://lore.kernel.org/r/20201009024937.11246-4-ryan_chen@aspeedtech.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This system uses a rx8900 compatible rtc device.
Signed-off-by: Ben Pai <Ben_Pai@wistron.com>
Link: https://lore.kernel.org/r/20210121073146.28217-1-Ben_Pai@wistron.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
AMD EthanolX CRB uses 2-byte POST codes which are sent to ports 0x80/0x81.
Currently ASPEED controller snoops only 0x80 port and therefore captures
only the lower byte of each POST code.
Enable secondary LPC snooping address to capture the higher byte of POST
codes.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210127182326.424-1-aladyshev22@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add the pinctrl entries for the GPIOs which are connected to the
push buttons on this board.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20210201133000.23402-1-michael@walle.cc
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
|
The Ebang EBAZ4205 is a simple board based on the Xilinx Zynq-7000 SoC.
Its features are:
- one serial port
- 256 MB RAM
- 128 MB NAND flash
- SDcard slot
- IP101GA 10/100 Mbit Ethernet PHY (connected to PL IOs)
- two LEDs (connected to PL IOs)
- one Push Button (connect to PL IOs)
- (optional) RTC
- (optional) Input voltage supervisor
The NAND flash is not supported in mainline linux yet. Unfortunately,
the PHY is connected via the PL, thus for working ethernet the FPGA has
to be configured. Also, depending on the board variant, the PHY has no
external crystal and its clock needs to be driven by the PL. FCLK3 is
used for this and is kept enabled.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20210120194033.26970-4-michael@walle.cc
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/soc
i.MX SoC update for 5.12:
- Drop unused IMX_GPIO_NR() macro.
- Remove KSZ8081 PHY fixup from i.MX6UL machine code, because it only
applies for KSZ8081RNA with 50MHz clock source, but breaks other
KSZ8081 PHY configurations.
- Add a print of CPU type and SOC revision for i.MX6UL during boot.
* tag 'imx-soc-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: Remove unused IMX_GPIO_NR() macro
ARM: mach-imx: imx6ul: Print SOC revision on boot
ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup
Link: https://lore.kernel.org/r/20210204120150.26186-2-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Fixed indices for mmc nodes; removal of obsolete amba bus nodes;
addition of nand flash controller odes to rk3036, rk2928, rv1108;
gpu node for rk3288-miqi and some cleanups to make dtbscheck happier.
* tag 'v5.12-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: assign a fixed index to mmc devices on rv1108 boards
ARM: dts: rockchip: assign a fixed index to mmc devices on rk322x boards
ARM: dts: rockchip: Remove bogus "amba" bus nodes
ARM: dts: rockchip: Add NFC node for RK3036 SoC
ARM: dts: rockchip: Add NFC node for RK2928 and other SoCs
ARM: dts: rockchip: Add NFC node for RV1108 SoC
ARM: dts: rockchip: rename thermal subnodes for rk3288
ARM: dts: rockchip: add QoS register compatibles for rk3288
ARM: dts: rockchip: add QoS register compatibles for rk3066/rk3188
ARM: dts: rockchip: add gpu node to rk3288-miqi
Link: https://lore.kernel.org/r/2184150.ElGaqSPkdT@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions into arm/dt
Actions Semi ARM DT changes for v5.12:
Updates to the existing S500 ARM SoC. Support has been added for CMU (Clock
Management Unit), Reset controller, DMA, Pinctrl/GPIO, MMC, I2C and SIRQ
(interrupt controller). Since the CMU support is added, the dummy fixed clock
used for the UART controller has been removed for all S500 based boards and
proper UART clock from CMU is used.
Added uSD support and I2C pinctrl configuration for Roseapplepi board based on
S500 SoC. This will make the board boot mainline with a distro from uSD card.
The I2C pinctrl config is added specifically for the PMIC which is currently
under review.
* tag 'actions-arm-dt-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions:
arm: dts: owl-s500-roseapplepi: Add I2C pinctrl configuration
arm: dts: owl-s500-roseapplepi: Add uSD support
arm: dts: owl-s500: Add SIRQ controller
arm: dts: owl-s500: Add I2C support
arm: dts: owl-s500: Add MMC support
arm: dts: owl-s500: Add pinctrl & GPIO support
arm: dts: owl-s500: Add DMA controller
arm: dts: owl-s500: Add Reset controller
arm: dts: owl-s500: Set CMU clocks for UARTs
arm: dts: owl-s500: Add Clock Management Unit
Link: https://lore.kernel.org/r/20210205050346.GA7619@thinkpad
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX device tree change for 5.12:
- A series from Oleksij Rempel to add i.MX6 based Plymovent, Protonic
and Kverneland boards.
- A series from Andreas Kemnade to improve UART support for ebook
readers.
- A series from Fabio Estevam to update imx6ul-14x14-evk device tree for
adding GPIO expander and camera support.
- A patch set from Lucas Stach to improve ZII RDU2 support, enabling
WDOG, tuning I2C drive-strength, RMI4 and UCS1002 ALERT.
- Other small and random updates on various boards.
* tag 'imx-dt-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (37 commits)
ARM: dts: imx6: RDU2: adjust audio devices nomenclature
ARM: dts: imx6: RDU2: only trigger IRQ on falling edge ucs1002 ALERT pin
ARM: dts: imx6: RDU2: enable RMI4 reduced reporting
ARM: dts: imx6: RDU2: reduce i2c drive-strength
ARM: dts: imx6: rdu2: enable WDOG1
ARM: dts: imx6-sr-som: increase at8035 PHY gigabit Tw parameter
ARM: dts: imx6: add wakeup support via magic packet
firmware: imx: select SOC_BUS to fix firmware build
arm64: dts: imx8mp: Correct the gpio ranges of gpio3
ARM: dts: imx6qdl-sr-som: fix some cubox-i platforms
ARM: dts: imx: e60k02: add second uart
ARM: dts: imx6sl-tolino-shine3: correct console uart pinmux
ARM: dts: imx6sl-tolino-shine2hd: add second uart
ARM: dts: imx6sl-tolino-shine2hd: correct console uart pinmux
ARM: imx: build suspend-imx6.S with arm instruction set
ARM: dts: imx7d-flex-concentrator: fix pcf2127 reset
ARM: dts: add Kverneland TGO board
ARM: dts: add Kverneland UT1, UT1Q and UT1P
ARM: dts: imx6ul-14x14-evk: Add camera support
ARM: dts: imx6ul-14x14-evk: Describe the KSZ8081 reset
...
Link: https://lore.kernel.org/r/20210204120150.26186-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM dts updates for 5.12
Introduces the Qualcomm SDX55 platform and the platform's MTP device,
with support for NAND, SDHCI and USB.
USB is enabled for IPQ4019 and the Alfa Network AP120C-AC and 8devices
Jalapeno boards are added.
Samsung Galaxy S5 gains display and GPU support.
* tag 'qcom-dts-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (38 commits)
ARM: dts: qcom: msm8974-klte: Mark essential regulators
ARM: dts: qcom: msm8974-klte: add support for display
ARM: dts: qcom: msm8974-klte: add support for GPU
ARM: dts: qcom: msm8974: add gpu support
ARM: dts: qcom: ipq4019: add SDHCI VQMMC LDO node
ARM: dts: qcom: replace status value "ok" by "okay"
ARM: dts: qcom: add additional DT labels in qcom-ipq8064.dtsi
ARM: dts: qcom: remove commented mmc-ddr-1_8v for sdcc3
ARM: dts: qcom: add Alfa Network AP120C-AC
ARM: dts: qcom: add 8devices Jalapeno
ARM: dts: qcom: ipq4019: add more labels
ARM: dts: qcom: ipq4019: add USB devicetree nodes
ARM: dts: qcom: add prng definition to ipq806x
ARM: dts: qcom: sdx55: Add pshold support
ARM: dts: qcom: sdx55: Add Watchdog support
dt-bindings: watchdog: Add binding for Qcom SDX55
ARM: dts: qcom: sdx55-mtp: Enable USB3 and PHY support
ARM: dts: qcom: sdx55: Add USB3 and PHY support
dt-bindings: usb: qcom,dwc3: Add binding for SDX55
ARM: dts: qcom: msm8974-klte: Fix shdc numbering
...
Link: https://lore.kernel.org/r/20210204052320.388999-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt
arm64: dts: amlogic updates for v5.12
- new board: Hardkernel ODROID-HC4 (SoC: SM1)
- new board: Beelink GS-King-X (SoC: S922X)
- shorten shorten audio card names for alsa compatibility
- misc cleanups & fixes
* tag 'amlogic-dt64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson: add initial device-tree for ODROID-HC4
dt-bindings: arm: amlogic: add ODROID-HC4 bindings
arm64: dts: meson: convert meson-sm1-odroid-c4 to dtsi
arm64: dts: meson: sort Amlogic dtb Makefile
dt-bindings: arm: amlogic: sort SM1 bindings
arm64: dts: meson: fix broken wifi node for Khadas VIM3L
arm64: dts: meson: add i2c3/rtc nodes and rtc aliases to ODROID-N2 dtsi
ARM: dts: meson: add the AO ARC remote processor
dt-bindings: Amlogic: add the documentation for the SECBUS2 registers
dt-bindings: sram: Add compatible strings for the Meson AO ARC SRAM
arm64: dts: meson: shorten audio card names for alsa compatibility
arm64: dts: meson: add initial Beelink GS-King-X device-tree
dt-bindings: arm: amlogic: add support for the Beelink GS-King-X
arm64: dts: meson: Fix schema warnings for pwm-leds
arm64: dts: meson: vim3: whitespace fixups
arm64: dts: meson: switch TFLASH_VDD_EN pin to open drain on Odroid-C4
Revert "arm64: dts: amlogic: add missing ethernet reset ID"
arm64: dts: amlogic: meson-g12: Set FL-adj property value
Link: https://lore.kernel.org/soc/7heehq7ag3.fsf@baylibre.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt
ARM: dts: amlogic updates for v5.12
- add thermal zones with cooling configuration
* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson8b: add the thermal-zones with cooling configuration
ARM: dts: meson8: add the thermal-zones with cooling configuration
ARM: dts: meson: add the ADC thermal sensor to meson.dtsi
ARM: dts: meson: move iio-hwmon for the SoC temperature to meson.dtsi
Link: https://lore.kernel.org/r/7ho8h12bto.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.12
1. Use new compatile to properly configure Exynos5420 USB2 PHY, fixing
it suspend/resume cycle.
2. Correct Samsung PMIC interrupt trigger levels on multiple boards.
3. Correct the voltages of Samsung GT-I9100 charger and add top-off
charger.
* tag 'samsung-dt-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Add top-off charging regulator node for I9100
ARM: dts: exynos: Fix charging regulator voltage and current for I9100
ARM: dts: exynos: correct PMIC interrupt trigger level on Odroid XU3 family
ARM: dts: exynos: correct PMIC interrupt trigger level on Arndale Octa
ARM: dts: exynos: correct PMIC interrupt trigger level on Spring
ARM: dts: exynos: correct PMIC interrupt trigger level on Rinato
ARM: dts: exynos: correct PMIC interrupt trigger level on Monk
ARM: dts: exynos: correct PMIC interrupt trigger level on Artik 5
ARM: dts: exynos: use Exynos5420 dedicated USB2 PHY compatible
Link: https://lore.kernel.org/r/20210125191240.11278-3-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/defconfig
Defconfig changes for omaps for v5.12 merge window
Update for moved and dropped options to make creating patches
against omap2plus_defconfig easier.
* tag 'omap-for-v5.12/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Update for dropped options
ARM: omap2plus_defconfig: Update for moved options
Link: https://lore.kernel.org/r/pull-1612421637-483551@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add the Everest machine powered by an AST2600 chip. Copy the basic
configuration from Rainier.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Tested-by: Andrew Geissler <geissonator@gmail.com>
Link: https://lore.kernel.org/r/20201211170704.27640-1-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
power-supply is compatible with Inspur's ipsps1 driver
Signed-off-by: George Liu <liuxiwei@inspur.com>
Link: https://lore.kernel.org/r/20201225015149.1416773-1-liuxiwei@inspur.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Signed-off-by: George Liu <liuxiwei@inspur.com>
Link: https://lore.kernel.org/r/20201225015126.1416690-1-liuxiwei@inspur.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The x11spi is a server platform with an ASPEED AST2500 BMC.
Signed-off-by: Ryan Sie <ryans@supermicro.com.tw>
Link: https://lore.kernel.org/r/20201221134315.5544-1-RyanS@supermicro.com.tw
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The NCSI_BMC_R_SEL and EN_NCSI_SWITCH_N should be active-high
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201211040002.1030-2-wangzhiqiang.bj@bytedance.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Enable ipmb on i2c4.
Signed-off-by: Lotus Xu <xuxiaohan@bytedance.com>
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201211040002.1030-1-wangzhiqiang.bj@bytedance.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Determined by scope measurements at speed.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201208012615.2717412-7-andrew@aj.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201202051634.490-2-wangzhiqiang.bj@bytedance.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The Mt. Jade BMC is an ASPEED AST2500-based BMC for the Mt. Jade
hardware reference platform with Ampere's Altra Processor Family.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Phong Vo <phong@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20201208043700.23098-3-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Make functions used only in this module static to fix W=1 build warnings:
arch/arm/mach-s3c/irq-s3c24xx.c:360:39: warning:
no previous prototype for ‘s3c24xx_handle_irq’ [-Wmissing-prototypes]
arch/arm/mach-s3c/irq-s3c24xx.c:1308:12: warning:
no previous prototype for ‘s3c2410_init_intc_of’ [-Wmissing-prototypes]
arch/arm/mach-s3c/irq-s3c24xx.c:1330:12: warning:
no previous prototype for ‘s3c2416_init_intc_of’ [-Wmissing-prototypes]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20210206133615.119804-2-krzk@kernel.org
|
|
Include headers to fix W=1 build warnings:
arch/arm/mach-s3c/irq-s3c24xx.c:389:5: warning:
no previous prototype for ‘s3c24xx_set_fiq’ [-Wmissing-prototypes]
arch/arm/mach-s3c/irq-s3c24xx.c:683:13: warning:
no previous prototype for ‘s3c2410_init_irq’ [-Wmissing-prototypes]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20210206133615.119804-1-krzk@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig
AT91 defconfig for 5.12, part 2:
- only at91_dt_defconfig and sama5_defconfig modified
- update to match current options, unneeded options removed
- missing drivers added, some are on-SoC peripherals, some are helpers
- modify legacy ATAGS or DT options to match common usage
* tag 'at91-defconfig-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: configs: sama5_defconfig: add QSPI driver
ARM: configs: at91_dt_defconfig: add ov7740 module
ARM: configs: at91_dt_defconfig: add useful helper options
ARM: configs: at91: DT/ATAG defconfig modifications
ARM: configs: sama5_defconfig: update and remove unneeded options
ARM: configs: at91: enable drivers for sam9x60
Link: https://lore.kernel.org/r/20210208115753.54730-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Compiling with the clang integrated assembler warns about
a recently added instruction:
<instantiation>:14:13: error: unknown token in expression
ldr tmp1, =#0x00020010UL
arch/arm/mach-at91/pm_suspend.S:542:2: note: while in macro instantiation
at91_plla_enable
Remove the extra '#' character that is not used for the 'ldr'
instruction when doing an indirect load of a constant.
Fixes: 4fd36e458392 ("ARM: at91: pm: add plla disable/enable support for sam9x60")
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210204160129.2249394-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add Quad SPI driver to the sama5 defconfig. This driver is needed for
sama5d2 SoC.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull ARM fixes from Russell King:
- Fix latent bug with DC21285 (Footbridge PCI bridge) configuration
accessors that affects GCC >= 4.9.2
- Fix misplaced tegra_uart_config in decompressor
- Ensure signal page contents are initialised
- Fix kexec oops
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: kexec: fix oops after TLB are invalidated
ARM: ensure the signal page contains defined contents
ARM: 9043/1: tegra: Fix misplaced tegra_uart_config in decompressor
ARM: footbridge: fix dc21285 PCI configuration accessors
|
|
Building with the clang integrated assembler produces a couple of
errors for the s3c24xx fiq support:
arch/arm/mach-s3c/irq-s3c24xx-fiq.S:52:2: error: instruction 'subne' can not set flags, but 's' suffix specified
subnes pc, lr, #4 @@ return, still have work to do
arch/arm/mach-s3c/irq-s3c24xx-fiq.S:64:1: error: invalid symbol redefinition
s3c24xx_spi_fiq_txrx:
There are apparently two problems: one with extraneous or duplicate
labels, and one with old-style opcode mnemonics. Stefan Agner has
previously fixed other problems like this, but missed this particular
file.
Fixes: bec0806cfec6 ("spi_s3c24xx: add FIQ pseudo-DMA support")
Cc: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20210204162416.3030114-1-arnd@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Add OV7740 as a module as it's useful testing camera sensors on
sam9x60ek for instance. Unify with sama5_defconfig as well.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
Add GPIO, SPI and I2C options that were missing from the
at91_dt_defconfig whereas they were in sama5_defconfig. It unifies all
AT91 defconfigs with same set of useful options.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
As all AT91 platforms are converted to DT for a long time, adapt the
defconfigs by:
- removing legacy CONFIG_ATAGS as a DT will always be provided;
- removing the CONFIG_ARM_APPENDED_DTB option on SAMA5 devices as the
vast majority of systems will use a DT-aware bootloader on these
devices.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|