| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"Most of this is part of my ongoing work to clean up the system call
tables. In this bit, all of the newer architectures are converted to
use the machine readable syscall.tbl format instead in place of
complex macros in include/uapi/asm-generic/unistd.h.
This follows an earlier series that fixed various API mismatches and
in turn is used as the base for planned simplifications.
The other two patches are dead code removal and a warning fix"
* tag 'asm-generic-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
vmlinux.lds.h: catch .bss..L* sections into BSS")
fixmap: Remove unused set_fixmap_offset_io()
riscv: convert to generic syscall table
openrisc: convert to generic syscall table
nios2: convert to generic syscall table
loongarch: convert to generic syscall table
hexagon: use new system call table
csky: convert to generic syscall table
arm64: rework compat syscall macros
arm64: generate 64-bit syscall.tbl
arm64: convert unistd_32.h to syscall.tbl format
arc: convert to generic syscall table
clone3: drop __ARCH_WANT_SYS_CLONE3 macro
kbuild: add syscall table generation to scripts/Makefile.asm-headers
kbuild: verify asm-generic header list
loongarch: avoid generating extra header files
um: don't generate asm/bpf_perf_event.h
csky: drop asm/gpio.h wrapper
syscalls: add generic scripts/syscall.tbl
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull arm SoC platform updates from Arnd Bergmann:
"The majority of the updates here are Dmitry Torokhov's cleanups for
platform code in the pxa and tegra platforms, changing custom
platform_data structures into DT-compatible software node
declarations.
The other updates are for the MAINTAINERS file, correcting some stale
or missing entries"
* tag 'soc-arm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: pxa: fix build breakage on PXA3xx
ti: omap: MAINTAINERS: move Benoît Cousson to CREDITS
amazon: MAINTAINERS: change to odd fixes and Tsahee Zidenberg to CREDITS
MAINTAINERS: thead: add git tree
ARM: spitz: Use software nodes for the ADS7846 touchscreen
ARM: spitz: Use software nodes to describe LED GPIOs
ARM: spitz: Use software nodes to describe MMC GPIOs
ARM: spitz: Use software nodes to describe LCD GPIOs
ARM: spitz: Use software nodes to describe audio GPIOs
ARM: spitz: Use software nodes to describe SPI CS lines
ARM: spitz: Simplify instantiating SPI controller
ARM: pxa/gumstix: convert vbus gpio to use software nodes
ARM: pxa: consolidate GPIO chip platform data
ARM: spitz: fix GPIO assignment for backlight
ARM: tegra: paz00: Use software nodes to describe GPIOs for WiFi rfkill
MAINTAINERS: ARM: airoha: add entry to cover Airoha SoC
bus: vexpress-config: Add missing MODULE_DESCRIPTION() macro
arm64: layerscape: remove redundant EDAC_SUPPORT selection
dt-bindings: arm: Remove obsolete RTSM DCSCB binding
arm: vexpress: Remove obsolete RTSM DCSCB support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC defconfig updates from Arnd Bergmann:
"These are the usual updates to enable newly added drivers, mostly for
arm64 and riscv this time"
* tag 'soc-defconfig-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: defconfig: Enable the IWLWIFI driver
ARM: multi_v7_defconfig: Add MCP23S08 pinctrl support
arm64: defconfig: Enable NVIDIA CoreSight PMU driver
arm64: defconfig: enable SHM Bridge support for the TZ memory allocator
arm64: defconfig: Enable secure QFPROM driver
ARM: imx_v6_v7_defconfig: enable DRM_SII902X and DRM_DISPLAY_CONNECTOR
ARM: imx_v6_v7_defconfig: Enable drivers for TQMa7x/MBa7x
riscv: defconfig: Enable StarFive JH7110 drivers
arm64: defconfig: Enable TI LP873X PMIC
arm64: defconfig: Enable USB2 PHY Driver
arm64: defconfig: Enable MTD support for Hyperbus
ARM: configs: at91: Enable LVDS serializer support
arm64: defconfig: enable several Qualcomm interconnects
arm64: defconfig: Enable Marvell 88Q2XXX PHY support
arm64: defconfig: make CONFIG_INTERCONNECT_QCOM_SM8350 built-in
arm64: defconfig: enable CONFIG_SM_GPUCC_8350
arm64: defconfig: Enable Renesas R-Car Gen4 PCIe controller
|
|
Pull SoC dt updates from Arnd Bergmann:
"The devicetree updates are fairly well spread out across platforms,
with Qualcomm making up about a third of the total.
There are three new SoCs in existing product families this:
- NXP i.MX95 is a variant of i.MX93, now with six Cortex-A55 cores
instead of just two as well as a GPU and more high-speed I/O
devices.
- Qualcomm QCS8550 is a variant of SM8550 for IOT devices
- Airoha EN7581 is a 10G-PON network chip and related to the MT7981
Wireless router chip from its parent Mediatek.
In total there are 58 new machines, including four riscv boards and
eight for 32-bit arm.
The most exciting new addition is probably a pair of laptops based on
the Qualcomm x1e80100 (Snapdragon X1 Elite) chip, the Asus Vivobook
S15 and the Lenovo Yoga Slim7x.
Other noteworthy new additions are:
- A total of 20 Qualcomm based machines, mostly Android devices from
Samsung, Motorola and LG, as well as a wireless router and some
reference designs
- Six NXP i.MX based machines, mostly industrial boards along with
some reference designs
- Mediatek sees some interesting Filogic based routers including the
"OpenWRT One", a few new Chromebooks as well as single-board
computers.
- Four machines from Solidrun based on Marvell cn913x, replacing the
older Armada 8000 based counterparts
- The four Amlogic machines are all set top boxes or reference
designs for them
- The nine new Rockchips machines are mostly single-board computers
including some interesting ones based on the rk3588 chip like the
ROCK 5 ITX board and the CM3588 with its four NVMe slots
- The RISC-V boards are all single-board computers based on Starfive
JH7110, Microchip MPFS and Allwinner D1, which all had similar
boards already
There are also a lot of updates to already supported machines, notably
for the TI K3, Rockchips, Freescale and of course Qualcomm platforms"
* tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (846 commits)
arm64: dts: allwinner: h616: add crypto engine node
riscv: dts: add clock generator for Sophgo SG2042 SoC
arm64: dts: rockchip: Add Xunlong Orange Pi 3B
dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3B
arm64: dts: rockchip: Add Radxa ROCK 3B
dt-bindings: arm: rockchip: Add Radxa ROCK 3B
mailmap: Update Luca Weiss's email address
ARM: dts: ixp4xx: nslu2: beeper uses PWM
arm64: dts: rockchip: add ROCK 5 ITX board
dt-bindings: arm: rockchip: Add ROCK 5 ITX board
arm64: dts: rockchip: Add dma-names to uart1 on Pine64 rk3566 devices
arm64: dts: rockchip: Add avdd supplies to hdmi on rock64
arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE
arm64: dts: qcom: msm8916-lg-m216: Add initial device tree
dt-bindings: arm: qcom: Add msm8916 based LG devices
ARM: dts: qcom: msm8960: correct memory base
arm64: dts: qcom: ipq9574: Add icc provider ability to gcc
dt-bindings: interconnect: Add Qualcomm IPQ9574 support
arm64: dts: qcom: sm8150: Add video clock controller node
arm64: dts: qcom: pm6150: Add vibrator
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The updates to the mediatek, allwinner, ti, tegra, microchip, stm32,
samsung, imx, zynq and amlogic platoforms are fairly small maintenance
changes, either addressing minor mistakes or enabling additional
hardware.
The qualcomm platform changes add a number of features and are larger
than the other ones combined, introducing the use of linux/cleanup.h
across several drivers, adding support for Snapdragon X1E and other
SoCs in platform drivers, a new "protection domain mapper" driver, and
a "shared memory bridge" driver.
The cznic "turris omnia" router based on Marvell Armada gets a
platform driver that talks to the board specific microcontroller.
The reset and cache subsystems get a few minor updates to SoC specific
drivers, while the ff-a, scmi and optee firmware drivers get some code
refactoring and new features"
* tag 'soc-drivers-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (122 commits)
firmware: turris-mox-rwtm: Initialize completion before mailbox
firmware: turris-mox-rwtm: Fix checking return value of wait_for_completion_timeout()
firmware: turris-mox-rwtm: Do not complete if there are no waiters
MAINTAINERS: drop riscv list from cache controllers
platform: cznic: turris-omnia-mcu: fix Kconfig dependencies
bus: sunxi-rsb: Constify struct regmap_bus
soc: sunxi: sram: Constify struct regmap_config
platform: cznic: turris-omnia-mcu: Depend on WATCHDOG
platform: cznic: turris-omnia-mcu: Depend on OF
soc: samsung: exynos-pmu: add support for PMU_ALIVE non atomic registers
arm64: stm32: enable scmi regulator for stm32
firmware: qcom: tzmem: blacklist more platforms for SHM Bridge
soc: qcom: wcnss: simplify with cleanup.h
soc: qcom: pdr: simplify with cleanup.h
soc: qcom: ocmem: simplify with cleanup.h
soc: qcom: mdt_loader: simplify with cleanup.h
soc: qcom: llcc: simplify with cleanup.h
firmware: qcom: tzmem: simplify returning pointer without cleanup
soc: qcom: socinfo: Add PM6350 PMIC
arm64: dts: renesas: rz-smarc: Replace fixed regulator for USB VBUS
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The biggest part is the virtual CPU hotplug that touches ACPI,
irqchip. We also have some GICv3 optimisation for pseudo-NMIs that has
been queued via the arm64 tree. Otherwise the usual perf updates,
kselftest, various small cleanups.
Core:
- Virtual CPU hotplug support for arm64 ACPI systems
- cpufeature infrastructure cleanups and making the FEAT_ECBHB ID
bits visible to guests
- CPU errata: expand the speculative SSBS workaround to more CPUs
- GICv3, use compile-time PMR values: optimise the way regular IRQs
are masked/unmasked when GICv3 pseudo-NMIs are used, removing the
need for a static key in fast paths by using a priority value
chosen dynamically at boot time
ACPI:
- 'acpi=nospcr' option to disable SPCR as default console for arm64
- Move some ACPI code (cpuidle, FFH) to drivers/acpi/arm64/
Perf updates:
- Rework of the IMX PMU driver to enable support for I.MX95
- Enable support for tertiary match groups in the CMN PMU driver
- Initial refactoring of the CPU PMU code to prepare for the fixed
instruction counter introduced by Arm v9.4
- Add missing PMU driver MODULE_DESCRIPTION() strings
- Hook up DT compatibles for recent CPU PMUs
Kselftest updates:
- Kernel mode NEON fp-stress
- Cleanups, spelling mistakes
Miscellaneous:
- arm64 Documentation update with a minor clarification on TBI
- Fix missing IPI statistics
- Implement raw_smp_processor_id() using thread_info rather than a
per-CPU variable (better code generation)
- Make MTE checking of in-kernel asynchronous tag faults conditional
on KASAN being enabled
- Minor cleanups, typos"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (69 commits)
selftests: arm64: tags: remove the result script
selftests: arm64: tags_test: conform test to TAP output
perf: add missing MODULE_DESCRIPTION() macros
arm64: smp: Fix missing IPI statistics
irqchip/gic-v3: Fix 'broken_rdists' unused warning when !SMP and !ACPI
ACPI: Add acpi=nospcr to disable ACPI SPCR as default console on ARM64
Documentation: arm64: Update memory.rst for TBI
arm64/cpufeature: Replace custom macros with fields from ID_AA64PFR0_EL1
KVM: arm64: Replace custom macros with fields from ID_AA64PFR0_EL1
perf: arm_pmuv3: Include asm/arm_pmuv3.h from linux/perf/arm_pmuv3.h
perf: arm_v6/7_pmu: Drop non-DT probe support
perf/arm: Move 32-bit PMU drivers to drivers/perf/
perf: arm_pmuv3: Drop unnecessary IS_ENABLED(CONFIG_ARM64) check
perf: arm_pmuv3: Avoid assigning fixed cycle counter with threshold
arm64: Kconfig: Fix dependencies to enable ACPI_HOTPLUG_CPU
perf: imx_perf: add support for i.MX95 platform
perf: imx_perf: fix counter start and config sequence
perf: imx_perf: refactor driver for imx93
perf: imx_perf: let the driver manage the counter usage rather the user
perf: imx_perf: add macro definitions for parsing config attr
...
|
|
Merge arm64 support for proper 'unsafe' user accessor functionality,
with 'asm goto' for handling exceptions.
The arm64 user access code used the slow fallback code for the user
access code, which generates horrendous code for things like
strncpy_from_user(), because it causes us to generate code for SW PAN
and for range checking for every individual word.
Teach arm64 about 'user_access_begin()' and the so-called 'unsafe' user
access functions that take an error label and use 'asm goto' to make all
the exception handling be entirely out of line.
[ These user access functions are called 'unsafe' not because the
concept is unsafe, but because the low-level accessor functions
absolutely have to be protected by the 'user_access_begin()' code,
because that's what does the range checking.
So the accessor functions have that scary name to make sure people
don't think they are usable on their own, and cannot be mis-used the
way our old "double underscore" versions of __get_user() and friends
were ]
The "(early part)" of the branch is because the full branch also
improved on the "access_ok()" function, but the exact semantics of TBI
(top byte ignore) have to be discussed before doing that part. So this
just does the low-level accessor update to use "asm goto".
* 'arm64-uaccess' (early part):
arm64: start using 'asm goto' for put_user()
arm64: start using 'asm goto' for get_user() when available
|
|
Merge minor word-at-a-time instruction choice improvements for x86 and
arm64.
This is the second of four branches that came out of me looking at the
code generation for path lookup on arm64.
The word-at-a-time infrastructure is used to do string operations in
chunks of one word both when copying the pathname from user space (in
strncpy_from_user()), and when parsing and hashing the individual path
components (in link_path_walk()).
In particular, the "find the first zero byte" uses various bit tricks to
figure out the end of the string or path component, and get the length
without having to do things one byte at a time. Both x86-64 and arm64
had less than optimal code choices for that.
The commit message for the arm64 change in particular tries to explain
the exact code flow for the zero byte finding for people who care. It's
made a bit more complicated by the fact that we support big-endian
hardware too, and so we have some extra abstraction layers to allow
different models for finding the zero byte, quite apart from the issue
of picking specialized instructions.
* word-at-a-time:
arm64: word-at-a-time: improve byte count calculations for LE
x86-64: word-at-a-time: improve byte count calculations
|
|
Merge runtime constants infrastructure with implementations for x86 and
arm64.
This is one of four branches that came out of me looking at profiles of
my kernel build filesystem load on my 128-core Altra arm64 system, where
pathname walking and the user copies (particularly strncpy_from_user()
for fetching the pathname from user space) is very hot.
This is a very specialized "instruction alternatives" model where the
dentry hash pointer and hash count will be constants for the lifetime of
the kernel, but the allocation are not static but done early during the
kernel boot. In order to avoid the pointer load and dynamic shift, we
just rewrite the constants in the instructions in place.
We can't use the "generic" alternative instructions infrastructure,
because different architectures do it very differently, and it's
actually simpler to just have very specific helpers, with a fallback to
the generic ("old") model of just using variables for architectures that
do not implement the runtime constant patching infrastructure.
Link: https://lore.kernel.org/all/CAHk-=widPe38fUNjUOmX11ByDckaeEo9tN4Eiyke9u1SAtu9sA@mail.gmail.com/
* runtime-constants:
arm64: add 'runtime constant' support
runtime constants: add x86 architecture support
runtime constants: add default dummy infrastructure
vfs: dcache: move hashlen_hash() from callers into d_hash()
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-07-12
We've added 23 non-merge commits during the last 3 day(s) which contain
a total of 18 files changed, 234 insertions(+), 243 deletions(-).
The main changes are:
1) Improve BPF verifier by utilizing overflow.h helpers to check
for overflows, from Shung-Hsi Yu.
2) Fix NULL pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT
when attr->attach_prog_fd was not specified, from Tengda Wu.
3) Fix arm64 BPF JIT when generating code for BPF trampolines with
BPF_TRAMP_F_CALL_ORIG which corrupted upper address bits,
from Puranjay Mohan.
4) Remove test_run callback from lwt_seg6local_prog_ops which never worked
in the first place and caused syzbot reports,
from Sebastian Andrzej Siewior.
5) Relax BPF verifier to accept non-zero offset on KF_TRUSTED_ARGS/
/KF_RCU-typed BPF kfuncs, from Matt Bobrowski.
6) Fix a long standing bug in libbpf with regards to handling of BPF
skeleton's forward and backward compatibility, from Andrii Nakryiko.
7) Annotate btf_{seq,snprintf}_show functions with __printf,
from Alan Maguire.
8) BPF selftest improvements to reuse common network helpers in sk_lookup
test and dropping the open-coded inetaddr_len() and make_socket() ones,
from Geliang Tang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (23 commits)
selftests/bpf: Test for null-pointer-deref bugfix in resolve_prog_type()
bpf: Fix null pointer dereference in resolve_prog_type() for BPF_PROG_TYPE_EXT
selftests/bpf: DENYLIST.aarch64: Skip fexit_sleep again
bpf: use check_sub_overflow() to check for subtraction overflows
bpf: use check_add_overflow() to check for addition overflows
bpf: fix overflow check in adjust_jmp_off()
bpf: Eliminate remaining "make W=1" warnings in kernel/bpf/btf.o
bpf: annotate BTF show functions with __printf
bpf, arm64: Fix trampoline for BPF_TRAMP_F_CALL_ORIG
selftests/bpf: Close obj in error path in xdp_adjust_tail
selftests/bpf: Null checks for links in bpf_tcp_ca
selftests/bpf: Use connect_fd_to_fd in sk_lookup
selftests/bpf: Use start_server_addr in sk_lookup
selftests/bpf: Use start_server_str in sk_lookup
selftests/bpf: Close fd in error path in drop_on_reuseport
selftests/bpf: Add ASSERT_OK_FD macro
selftests/bpf: Add backlog for network_helper_opts
selftests/bpf: fix compilation failure when CONFIG_NF_FLOW_TABLE=m
bpf: Remove tst_run from lwt_seg6local_prog_ops.
bpf: relax zero fixed offset constraint on KF_TRUSTED_ARGS/KF_RCU
...
====================
Link: https://patch.msgid.link/20240712212448.5378-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
f7ce5eb2cb79 ("bnxt_en: Fix crash in bnxt_get_max_rss_ctx_ring()")
20c8ad72eb7f ("eth: bnxt: use the RSS context XArray instead of the local list")
Adjacent changes:
net/ethtool/ioctl.c
503757c80928 ("net: ethtool: Fix RSS setting")
eac9122f0c41 ("net: ethtool: record custom RSS contexts in the XArray")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
* for-next/vcpu-hotplug: (21 commits)
: arm64 support for virtual CPU hotplug (ACPI)
irqchip/gic-v3: Fix 'broken_rdists' unused warning when !SMP and !ACPI
arm64: Kconfig: Fix dependencies to enable ACPI_HOTPLUG_CPU
cpumask: Add enabled cpumask for present CPUs that can be brought online
arm64: document virtual CPU hotplug's expectations
arm64: Kconfig: Enable hotplug CPU on arm64 if ACPI_PROCESSOR is enabled.
arm64: arch_register_cpu() variant to check if an ACPI handle is now available.
arm64: psci: Ignore DENIED CPUs
irqchip/gic-v3: Add support for ACPI's disabled but 'online capable' CPUs
irqchip/gic-v3: Don't return errors from gic_acpi_match_gicc()
arm64: acpi: Harden get_cpu_for_acpi_id() against missing CPU entry
arm64: acpi: Move get_cpu_for_acpi_id() to a header
ACPI: Add post_eject to struct acpi_scan_handler for cpu hotplug
ACPI: scan: switch to flags for acpi_scan_check_and_detach()
ACPI: processor: Register deferred CPUs from acpi_processor_get_info()
ACPI: processor: Add acpi_get_processor_handle() helper
ACPI: processor: Move checks and availability of acpi_processor earlier
ACPI: processor: Fix memory leaks in error paths of processor_add()
ACPI: processor: Return an error if acpi_processor_get_info() fails in processor_add()
ACPI: processor: Drop duplicated check on _STA (enabled + present)
cpu: Do not warn on arch_register_cpu() returning -EPROBE_DEFER
...
|
|
'for-next/mte', 'for-next/errata', 'for-next/acpi', 'for-next/gic-v3-pmr' and 'for-next/doc', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
perf: add missing MODULE_DESCRIPTION() macros
perf: arm_pmuv3: Include asm/arm_pmuv3.h from linux/perf/arm_pmuv3.h
perf: arm_v6/7_pmu: Drop non-DT probe support
perf/arm: Move 32-bit PMU drivers to drivers/perf/
perf: arm_pmuv3: Drop unnecessary IS_ENABLED(CONFIG_ARM64) check
perf: arm_pmuv3: Avoid assigning fixed cycle counter with threshold
perf: imx_perf: add support for i.MX95 platform
perf: imx_perf: fix counter start and config sequence
perf: imx_perf: refactor driver for imx93
perf: imx_perf: let the driver manage the counter usage rather the user
perf: imx_perf: add macro definitions for parsing config attr
dt-bindings: perf: fsl-imx-ddr: Add i.MX95 compatible
perf: pmuv3: Add new Cortex and Neoverse PMUs
dt-bindings: arm: pmu: Add new Cortex and Neoverse cores
perf/arm-cmn: Enable support for tertiary match group
perf/arm-cmn: Decouple wp_config registers from filter group number
* for-next/cpufeature:
: Various cpufeature infrastructure patches
arm64/cpufeature: Replace custom macros with fields from ID_AA64PFR0_EL1
KVM: arm64: Replace custom macros with fields from ID_AA64PFR0_EL1
arm64/cpufeatures/kvm: Add ARMv8.9 FEAT_ECBHB bits in ID_AA64MMFR1 register
* for-next/misc:
: Miscellaneous patches
arm64: smp: Fix missing IPI statistics
arm64: Cleanup __cpu_set_tcr_t0sz()
arm64/mm: Stop using ESR_ELx_FSC_TYPE during fault
arm64: Kconfig: fix typo in __builtin_return_adddress
ARM64: reloc_test: add missing MODULE_DESCRIPTION() macro
arm64: implement raw_smp_processor_id() using thread_info
arm64/arch_timer: include <linux/percpu.h>
* for-next/kselftest:
: arm64 kselftest updates
selftests: arm64: tags: remove the result script
selftests: arm64: tags_test: conform test to TAP output
kselftest/arm64: Fix a couple of spelling mistakes
kselftest/arm64: Fix redundancy of a testcase
kselftest/arm64: Include kernel mode NEON in fp-stress
* for-next/mte:
: MTE updates
arm64: mte: Make mte_check_tfsr_*() conditional on KASAN instead of MTE
* for-next/errata:
: Arm CPU errata workarounds
arm64: errata: Expand speculative SSBS workaround
arm64: errata: Unify speculative SSBS errata logic
arm64: cputype: Add Cortex-X925 definitions
arm64: cputype: Add Cortex-A720 definitions
arm64: cputype: Add Cortex-X3 definitions
* for-next/acpi:
: arm64 ACPI patches
ACPI: Add acpi=nospcr to disable ACPI SPCR as default console on ARM64
ACPI / amba: Drop unnecessary check for registered amba_dummy_clk
arm64: FFH: Move ACPI specific code into drivers/acpi/arm64/
arm64: cpuidle: Move ACPI specific code into drivers/acpi/arm64/
ACPI: arm64: Sort entries alphabetically
* for-next/gic-v3-pmr:
: arm64: irqchip/gic-v3: Use compiletime constant PMR values
arm64: irqchip/gic-v3: Select priorities at boot time
irqchip/gic-v3: Detect GICD_CTRL.DS and SCR_EL3.FIQ earlier
irqchip/gic-v3: Make distributor priorities variables
irqchip/gic-common: Remove sync_access callback
wordpart.h: Add REPEAT_BYTE_U32()
* for-next/doc:
: arm64 documentation updates
Documentation: arm64: Update memory.rst for TBI
|
|
When BPF_TRAMP_F_CALL_ORIG is set, the trampoline calls
__bpf_tramp_enter() and __bpf_tramp_exit() functions, passing them
the struct bpf_tramp_image *im pointer as an argument in R0.
The trampoline generation code uses emit_addr_mov_i64() to emit
instructions for moving the bpf_tramp_image address into R0, but
emit_addr_mov_i64() assumes the address to be in the vmalloc() space
and uses only 48 bits. Because bpf_tramp_image is allocated using
kzalloc(), its address can use more than 48-bits, in this case the
trampoline will pass an invalid address to __bpf_tramp_enter/exit()
causing a kernel crash.
Fix this by using emit_a64_mov_i64() in place of emit_addr_mov_i64()
as it can work with addresses that are greater than 48-bits.
Fixes: efc9909fdce0 ("bpf, arm64: Add bpf trampoline for arm64")
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://lore.kernel.org/all/SJ0PR15MB461564D3F7E7A763498CA6A8CBDB2@SJ0PR15MB4615.namprd15.prod.outlook.com/
Link: https://lore.kernel.org/bpf/20240711151838.43469-1-puranjay@kernel.org
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner SoC device tree changes for 6.11 part 2
One additional peripheral enabled for the H616.
- H616 crypto engine added
* tag 'sunxi-dt-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h616: add crypto engine node
Link: https://lore.kernel.org/r/Zo7O73Afx7lZcBRi@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The Allwinner H616 SoC contains a crypto engine very similar to the H6
version, but with all base addresses in the DMA descriptors shifted by
two bits. This requires a new compatible string.
Also the H616 CE relies on the internal osciallator for the TRNG
operation, so we need to reference this clock.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20240624232110.9817-5-andre.przywara@arm.com
[wens@csie.org: fix up register range size]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The generated asm/unistd_compat_32.h header file now contains
macros that can be used directly in the vdso and the signal
trampolines, so remove the duplicate definitions.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Change the asm/unistd.h header for arm64 to no longer include
asm-generic/unistd.h itself, but instead generate both the asm/unistd.h
contents and the list of entry points using the syscall.tbl scripts that
we use on most other architectures.
Once his is done for the remaining architectures, the generic unistd.h
header can be removed and the generated tbl file put in its place.
The Makefile changes are more complex than they should be, I need
a little help to improve those. Ideally this should be done in an
architecture-independent way as well.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This is a straight conversion from the old asm/unistd32.h into the
format used by 32-bit arm and most other architectures, calling scripts
to generate the asm/unistd32.h header and a new asm/syscalls32.h headers.
I used a semi-automated text replacement method to do the conversion,
and then used 'vimdiff' to synchronize the whitespace and the (unused)
names of the non-compat syscalls with the arm version.
There are two differences between the generated syscalls names and the
old version:
- the old asm/unistd32.h contained only a __NR_sync_file_range2
entry, while the arm32 version also defines
__NR_arm_sync_file_range with the same number. I added this
duplicate back in asm/unistd32.h.
- __NR__sysctl was removed from the arm64 file a while ago, but
all the tables still contain it. This should probably get removed
everywhere but I added it here for consistency.
On top of that, the arm64 version does not contain any references to
the 32-bit OABI syscalls that are not supported by arm64. If we ever
want to share the file between arm32 and arm64, it would not be
hard to add support for both in one file.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
When clone3() was introduced, it was not obvious how each architecture
deals with setting up the stack and keeping the register contents in
a fork()-like system call, so this was left for the architecture
maintainers to implement, with __ARCH_WANT_SYS_CLONE3 defined by those
that already implement it.
Five years later, we still have a few architectures left that are missing
clone3(), and the macro keeps getting in the way as it's fundamentally
different from all the other __ARCH_WANT_SYS_* macros that are meant
to provide backwards-compatibility with applications using older
syscalls that are no longer provided by default.
Address this by reversing the polarity of the macro, adding an
__ARCH_BROKEN_SYS_CLONE3 macro to all architectures that don't
already provide the syscall, and remove __ARCH_WANT_SYS_CLONE3
from all the other ones.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
A few more Arm64 DeviceTree updates for v6.11
This introduces support for Lenovo Thinkpad Yoga slim 7x, LG Leon LTE,
and LG K10 (K420n).
In addition to this, all Gen-1 platforms gets the DWC3 quirk to disable
"SuperSpeed in park mode", which resolves an instabliity issue seen in
host mode.
For Fairphone 4, PM6150L and PMK8003 thermal sensors are added and
thermal zones defined.
Two fastrpc contexts on SM6350 are marked as non-secure, to allow
non-secure usage.
The video clock controller on SM8150 is introduced. IPQ9574 GCC is
marked as a interconnect provider. The vibrator block in the PM6150 is
described.
On SC7280 the download mode register is defined for SCM, allowing it to
enable/disable the ramdump support during a system crash.
Lastly, add a mailmap entry for Luca Weiss.
* tag 'qcom-arm64-for-6.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (22 commits)
mailmap: Update Luca Weiss's email address
arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE
arm64: dts: qcom: msm8916-lg-m216: Add initial device tree
dt-bindings: arm: qcom: Add msm8916 based LG devices
arm64: dts: qcom: ipq9574: Add icc provider ability to gcc
dt-bindings: interconnect: Add Qualcomm IPQ9574 support
arm64: dts: qcom: sm8150: Add video clock controller node
arm64: dts: qcom: pm6150: Add vibrator
arm64: dts: qcom: sc7280: Enable download mode register write
arm64: dts: qcom: sm7225-fairphone-fp4: Add PM6150L thermals
arm64: dts: qcom: sm7225-fairphone-fp4: Add PMK8003 thermals
arm64: dts: qcom: sm6350: Add missing qcom,non-secure-domain property
arm64: dts: qcom: sdm845: Disable SS instance in Parkmode for USB
arm64: dts: qcom: msm8996: Disable SS instance in Parkmode for USB
arm64: dts: qcom: sm6350: Disable SS instance in Parkmode for USB
arm64: dts: qcom: sm6115: Disable SS instance in Parkmode for USB
arm64: dts: qcom: sdm630: Disable SS instance in Parkmode for USB
arm64: dts: qcom: msm8998: Disable SS instance in Parkmode for USB
arm64: dts: qcom: ipq8074: Disable SS instance in Parkmode for USB
arm64: dts: qcom: ipq6018: Disable SS instance in Parkmode for USB
...
Link: https://lore.kernel.org/r/20240709193406.3966-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-07-08
The following pull-request contains BPF updates for your *net-next* tree.
We've added 102 non-merge commits during the last 28 day(s) which contain
a total of 127 files changed, 4606 insertions(+), 980 deletions(-).
The main changes are:
1) Support resilient split BTF which cuts down on duplication and makes BTF
as compact as possible wrt BTF from modules, from Alan Maguire & Eduard Zingerman.
2) Add support for dumping kfunc prototypes from BTF which enables both detecting
as well as dumping compilable prototypes for kfuncs, from Daniel Xu.
3) Batch of s390x BPF JIT improvements to add support for BPF arena and to implement
support for BPF exceptions, from Ilya Leoshkevich.
4) Batch of riscv64 BPF JIT improvements in particular to add 12-argument support
for BPF trampolines and to utilize bpf_prog_pack for the latter, from Pu Lehui.
5) Extend BPF test infrastructure to add a CHECKSUM_COMPLETE validation option
for skbs and add coverage along with it, from Vadim Fedorenko.
6) Inline bpf_get_current_task/_btf() helpers in the arm64 BPF JIT which gives
a small 1% performance improvement in micro-benchmarks, from Puranjay Mohan.
7) Extend the BPF verifier to track the delta between linked registers in order
to better deal with recent LLVM code optimizations, from Alexei Starovoitov.
8) Fix bpf_wq_set_callback_impl() kfunc signature where the third argument should
have been a pointer to the map value, from Benjamin Tissoires.
9) Extend BPF selftests to add regular expression support for test output matching
and adjust some of the selftest when compiled under gcc, from Cupertino Miranda.
10) Simplify task_file_seq_get_next() and remove an unnecessary loop which always
iterates exactly once anyway, from Dan Carpenter.
11) Add the capability to offload the netfilter flowtable in XDP layer through
kfuncs, from Florian Westphal & Lorenzo Bianconi.
12) Various cleanups in networking helpers in BPF selftests to shave off a few
lines of open-coded functions on client/server handling, from Geliang Tang.
13) Properly propagate prog->aux->tail_call_reachable out of BPF verifier, so
that x86 JIT does not need to implement detection, from Leon Hwang.
14) Fix BPF verifier to add a missing check_func_arg_reg_off() to prevent an
out-of-bounds memory access for dynpointers, from Matt Bobrowski.
15) Fix bpf_session_cookie() kfunc to return __u64 instead of long pointer as
it might lead to problems on 32-bit archs, from Jiri Olsa.
16) Enhance traffic validation and dynamic batch size support in xsk selftests,
from Tushar Vyavahare.
bpf-next-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (102 commits)
selftests/bpf: DENYLIST.aarch64: Remove fexit_sleep
selftests/bpf: amend for wrong bpf_wq_set_callback_impl signature
bpf: helpers: fix bpf_wq_set_callback_impl signature
libbpf: Add NULL checks to bpf_object__{prev_map,next_map}
selftests/bpf: Remove exceptions tests from DENYLIST.s390x
s390/bpf: Implement exceptions
s390/bpf: Change seen_reg to a mask
bpf: Remove unnecessary loop in task_file_seq_get_next()
riscv, bpf: Optimize stack usage of trampoline
bpf, devmap: Add .map_alloc_check
selftests/bpf: Remove arena tests from DENYLIST.s390x
selftests/bpf: Add UAF tests for arena atomics
selftests/bpf: Introduce __arena_global
s390/bpf: Support arena atomics
s390/bpf: Enable arena
s390/bpf: Support address space cast instruction
s390/bpf: Support BPF_PROBE_MEM32
s390/bpf: Land on the next JITed instruction after exception
s390/bpf: Introduce pre- and post- probe functions
s390/bpf: Get rid of get_probe_mem_regno()
...
====================
Link: https://patch.msgid.link/20240708221438.10974-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This implements the runtime constant infrastructure for arm64, allowing
the dcache d_hash() function to be generated using as a constant for
hash table address followed by shift by a constant of the hash index.
[ Fixed up to deal with the big-endian case as per Mark Rutland ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/arm
i.MX SoC change for 6.11:
- Remove redundant EDAC_SUPPORT selection from ARCH_LAYERSCAPE
* tag 'imx-soc-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: layerscape: remove redundant EDAC_SUPPORT selection
Link: https://lore.kernel.org/r/20240702142153.413061-1-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/drivers
Reset controller updates for v6.11, part 2
This tag adds USB VBUS regulator control for Renesas RZ/G2L SoCs,
which also touches PHY driver and device tree, and pulls in a new
regulator_hardware_enable() helper.
The Tegra BPMP reset driver can be compiled under COMPILE_TEST now.
* tag 'reset-for-v6.11-2' of git://git.pengutronix.de/pza/linux:
arm64: dts: renesas: rz-smarc: Replace fixed regulator for USB VBUS
phy: renesas: phy-rcar-gen3-usb2: Control VBUS for RZ/G2L SoCs
reset: renesas: Add USB VBUS regulator device as child
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document USB VBUS regulator
reset: tegra-bpmp: allow building under COMPILE_TEST
regulator: core: Add helper for allow HW access to enable/disable regulator
Link: https://lore.kernel.org/r/20240703100809.2773890-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add SCMI ARM REGULATOR configuration for stm32.
Signed-off-by: Pascal Paillet <p.paillet@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240705134554.2833835-1-alexandre.torgue@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
These are two additional boards, the Xunlong Orange Pi 3B and
the Add Radxa ROCK 3B.
* tag 'v6.11-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add Xunlong Orange Pi 3B
dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3B
arm64: dts: rockchip: Add Radxa ROCK 3B
dt-bindings: arm: rockchip: Add Radxa ROCK 3B
Link: https://lore.kernel.org/r/2191200.GUh0CODmnK@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/defconfig
i.MX defconfig change for 6.11:
- Enable a few drivers needed by TQMa7x/MBa7x and i.MX53 QSB/QSRB in
imx_v6_v7_defconfig
- Enable IWLWIFI driver support in arm64 defconfig
* tag 'imx-defconfig-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: Enable the IWLWIFI driver
ARM: imx_v6_v7_defconfig: enable DRM_SII902X and DRM_DISPLAY_CONNECTOR
ARM: imx_v6_v7_defconfig: Enable drivers for TQMa7x/MBa7x
Link: https://lore.kernel.org/r/20240709012534.3106441-1-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The IOT-GATE-iMX8 board has an Intel Wifi 6 AX200 module.
Enable the IWLWIFI driver so that Wifi can work by default.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The Xunlong Orange Pi 3B is a single-board computer based on the
Rockchip RK3566 SoC.
Add initial support for eMMC, SD-card, Ethernet, HDMI, PCIe and USB.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240626230319.1425316-3-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The Radxa ROCK 3B is a single-board computer based on the Pico-ITX form
factor (100mm x 75mm). Two versions of the ROCK 3B exists, a community
version based on the RK3568 SoC and an industrial version based on the
RK3568J SoC.
Add initial support for eMMC, SD-card, Ethernet, HDMI, PCIe and USB.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240627211737.1985549-3-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/defconfig
Qualcomm Arm64 defconfig updates for v6.11
This enables the newly introduce Shared Memory Bridge driver which
improves the mechansim with which buffers are shared with TrustZone.
It turns MSM8996, SM8150 and SM8350 interconnect providers to builtin,
as debug UART now depends on these. The SM8350 GPU clock controller is
enabled.
The secure QFPROM driver is enabled, to provide access to OTP
configuration for the LLCC driver on the QDU1000 platform.
* tag 'qcom-arm64-defconfig-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: enable SHM Bridge support for the TZ memory allocator
arm64: defconfig: Enable secure QFPROM driver
arm64: defconfig: enable several Qualcomm interconnects
arm64: defconfig: make CONFIG_INTERCONNECT_QCOM_SM8350 built-in
arm64: defconfig: enable CONFIG_SM_GPUCC_8350
Link: https://lore.kernel.org/r/20240706155347.16207-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/defconfig
TI K3 defconfig updates for v6.11
Enable Hyperbus support present on various J7xx EVMs
OMAP_USB2 driver for AM65 SoC
LP873X PMIC related drivers for am642-phyboard-electra
* tag 'ti-k3-config-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
arm64: defconfig: Enable TI LP873X PMIC
arm64: defconfig: Enable USB2 PHY Driver
arm64: defconfig: Enable MTD support for Hyperbus
Link: https://lore.kernel.org/r/c6b2a0c3-e8c3-4e7a-90ca-a3b9834c63c9@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
commit 83cfac95c018 ("genirq: Allow interrupts to be excluded from
/proc/interrupts") is to avoid IPIs appear twice in /proc/interrupts.
But the commit 331a1b3a836c ("arm64: smp: Add arch support for backtrace
using pseudo-NMI") and commit 2f5cd0c7ffde("arm64: kgdb: Implement
kgdb_roundup_cpus() to enable pseudo-NMI roundup") set CPU_BACKTRACE and
KGDB_ROUNDUP IPIs "IRQ_HIDDEN" flag but not show them in
arch_show_interrupts(), which cause the interrupt kstat_irqs accounting
is missing in display.
Before this patch, CPU_BACKTRACE and KGDB_ROUNDUP IPIs are missing:
/ # cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
11: 466 600 309 332 GICv3 27 Level arch_timer
13: 24 0 0 0 GICv3 33 Level uart-pl011
15: 64 0 0 0 GICv3 78 Edge virtio0
16: 0 0 0 0 GICv3 79 Edge virtio1
17: 0 0 0 0 GICv3 34 Level rtc-pl031
18: 3 3 3 3 GICv3 23 Level arm-pmu
19: 0 0 0 0 9030000.pl061 3 Edge GPIO Key Poweroff
IPI0: 7 14 9 26 Rescheduling interrupts
IPI1: 354 93 233 255 Function call interrupts
IPI2: 0 0 0 0 CPU stop interrupts
IPI3: 0 0 0 0 CPU stop (for crash dump) interrupts
IPI4: 0 0 0 0 Timer broadcast interrupts
IPI5: 1 0 0 0 IRQ work interrupts
Err: 0
After this pacth, CPU_BACKTRACE and KGDB_ROUNDUP IPIs are displayed:
/ # cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
11: 393 281 532 449 GICv3 27 Level arch_timer
13: 15 0 0 0 GICv3 33 Level uart-pl011
15: 64 0 0 0 GICv3 78 Edge virtio0
16: 0 0 0 0 GICv3 79 Edge virtio1
17: 0 0 0 0 GICv3 34 Level rtc-pl031
18: 2 2 2 2 GICv3 23 Level arm-pmu
19: 0 0 0 0 9030000.pl061 3 Edge GPIO Key Poweroff
IPI0: 11 19 4 23 Rescheduling interrupts
IPI1: 279 347 222 72 Function call interrupts
IPI2: 0 0 0 0 CPU stop interrupts
IPI3: 0 0 0 0 CPU stop (for crash dump) interrupts
IPI4: 0 0 0 0 Timer broadcast interrupts
IPI5: 1 0 0 1 IRQ work interrupts
IPI6: 0 0 0 0 CPU backtrace interrupts
IPI7: 0 0 0 0 KGDB roundup interrupts
Err: 0
Fixes: 331a1b3a836c ("arm64: smp: Add arch support for backtrace using pseudo-NMI")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Doug Anderson <dianders@chromium.org>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240620063600.573559-1-ruanjinjie@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/defconfig
arm64: tegra: Default configuration changes for v6.11-rc1
A single change to enable the driver for the NVIDIA CoreSight PMU.
* tag 'tegra-for-6.11-arm64-defconfig' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Enable NVIDIA CoreSight PMU driver
Link: https://lore.kernel.org/r/20240628210818.3627404-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/defconfig
Renesas ARM defconfig updates for v6.11
- Enable support for Renesas R-Car Gen4 PCIe controllers and Marvell
88Q2XXX 100/1000BASE-T1 Automotive Ethernet PHYs in the ARM64
defconfig.
* tag 'renesas-arm-defconfig-for-v6.11-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable Marvell 88Q2XXX PHY support
arm64: defconfig: Enable Renesas R-Car Gen4 PCIe controller
Link: https://lore.kernel.org/r/cover.1718355311.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
One new board, the pretty interesting Rock 5 ITX, some improvements
for the Lunzn Fastrhino R6xS boards, allowing dma on uarts connected
to bluetooth modules and an update for the gpu operating points on
rk356x. As well as some minor fixes for missing power-dmains and
ethernet phy binding adherence.
* tag 'v6.11-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: add ROCK 5 ITX board
dt-bindings: arm: rockchip: Add ROCK 5 ITX board
arm64: dts: rockchip: Add dma-names to uart1 on Pine64 rk3566 devices
arm64: dts: rockchip: Add avdd supplies to hdmi on rock64
arm64: dts: rockchip: fixes PHY reset for Lunzn Fastrhino R68S
arm64: dts: rockchip: disable display subsystem for Lunzn Fastrhino R6xS
arm64: dts: rockchip: remove unused usb2 nodes for Lunzn Fastrhino R6xS
arm64: dts: rockchip: fix pmu_io supply for Lunzn Fastrhino R6xS
arm64: dts: rockchip: fix usb regulator for Lunzn Fastrhino R6xS
arm64: dts: rockchip: fix regulator name for Lunzn Fastrhino R6xS
arm64: dts: rockchip: Add dma-names to uart1 on quartz64-b
arm64: dts: rockchip: Update GPU OPP voltages in RK356x SoC dtsi
arm64: dts: rockchip: Add GPU OPP voltage ranges to RK356x SoC dtsi
arm64: dts: rockchip: Drop ethernet-phy-ieee802.3-c22 from PHY compatible string on all RK3588 boards
arm64: dts: rockchip: Add missing power-domains for rk356x vop_mmu
Link: https://lore.kernel.org/r/1998182.CrzyxZ31qj@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.11
This introduces 11 new boards, namely:
* ASUS Vivobook S 15
* Lenovo Smart Tab M10 DTS
* Motorola Moto E 2015 LTE (surnia)
* Motorola Moto G 2015 (osprey)
* Motorola Moto G4 Play (harpia)
* Qualcomm AIM300 AIoT development board
* Qualcomm SM8650 Hardware Development Kit (HDK)
* SHIFTphone 8
* Samsung Galaxy Z Fold5
* Schneider HMIBSC board DTS
* TP-Link Archer AX55 v1
Of particular interest here is the Asus Vivobook, the first supported X1
Elite consumer laptop.
For IPQ6018 an SDHCI controller is added and on IPQ9574 an MDIO bus is
described.
The improvements to MSM8916-based devices continues, with sound and
mdoem support added to Acer Iconia Talk S and GPLUS FL8005A, the latter
also gaining BMS support. Samsung Galaxy devices gains PMIC and charger
definitions, NFC support and MUIC. Accelerometer and magnetometer
support is added to the Samsung Galaxy Grand Prime devices.
On MSM8976 definitions for IOMMU, the display subsystem, wifi subsystem,
and Adreno GPU are added.
On MSM8996 UFS core clock frequencies are specified, FastRPC nodes are
added for the audio DSP, glink-edges are described where available, the
display subsystem reset is added.
Venus is introduced on MSM8998 and the "No MSA Ready" quirk is added to
allow ath10k to come up.
GPU support is added to QCM2290 and enabled on the RB1 development
board.
The I2C controller used for communicating with the LT9611UXC HDMI
bridge is temporarily replaced with i2c-gpio while issues with the
builtin controller is diagnosed. The same is done for RB2, on the
QRB4210 platform.
On RB2 TCPM max current draw is corrected and the vreg_l9a regulator is
marked as always on to match expectations.
On the QDU1000 platform, USB is added, secure QFPROM is introduced to
allow LLCC to access OTP data. USB is enabled on the two IDP boards.
SA8775p gains PCIe endpoint definitions, LLCCC support, IMEM and PIL
info regions. Nodes are marked as dma-coherent as needed, a dedicated
carveout for shared memory bridge allocations is introduced.
The SA8775P ride device is split in the two versions r2 and r3.
The SC7180 Trogdor clamshell/detachable fragments are refactored for
convenience, and pwmleds are disabled where unused.
On SC7280 the APR nodes for interfacing with the audio services in audio
DSP firmware are introduced. The Qualcomm SMMU TBUs are described, to
enable improved debug support. QoS clocks are added to interconnects, as
needed in order to operate the QoS settings on some buses.
SuperSpeed in park is disabled for the primary DWC3 instance to address
host controller issues under load.
The PM8008 (camera PMIC) is introduced in Fairphone 5, regulators are
named for better output, and firmware name for IPA is adjusted to the
preferred file format.
The HDMI bridge on Rb3gen2 is described, rtc, gpi-dma and qup nodes are
enabled.
The Type-C port manager found in PM7250b is enabled, for targets not
using pmic-glink firmware for Type-C management.
SC8180X gets a number of smaller corrections, and some cleanups -
related to both functional issues and DeviceTree validation.
The PSHOLD node is marked reserved, after reports that this causes
issues during shutdown. Description of the USB signals are updated to
match the signal path. The PM8008 camera PMIC is added to Lenovo
ThinkPad X13s.
The PM660 PMIC is extended with charger and rradc definitions, and the
SDM670 gains a SMEM region definition.
On SDM845 the Qualcomm SMMU TBU nodes are described, to enable improved
debug output during faults etc. The UFS PHY is associated with its GDSC,
and the DisplayPort controller is wired up to the QMP PHY.
The Lenovo Yoga C630 Embedded Controller is introduced, adding battery
and Type-C port management and altmode support. The C630 also gains WiFI
calibration variant information, to cause selection of the right data.
The missing IPA firmware path is corrected.
For the SDX75 platform, AOSS, IPCC, SDHCI, TCSR, modem SMP2P, I2C and
SPI nodes are introduced. SD-card support is added to the IDP board.
CPUfreq support is introduced for the SM4450 platform.
Missing reset is added to the SDHC controller of SM6115. The UFS PHY
is associated with its GDSC, so is the PHY on SM6350.
On Fairphone 4, the camera pmic (PM8008) is introduced, regulators are
named for more informative debug output, and USB role switching is
enabled.
On the Fairphone 3, vibrator support is added and enabled.
On SM8250, the USB signal paths are properly described in the OF graph,
the UFS PHY gains its required power-domains description.
Thanks to the introduction of PCI power sequence support, the QRB5165
RB5 WiFi chip can now be powered up, so this is added.
Touchscreen interrupt flags are corrected accross a number of Sony
Xperia devices, to remove the unexpected traces from downstream.
On SM8450 an OPP-table is introduced for the PCIe controllers, to
specify the bandwidth and performance state requirements for the
different genrations and link widths. For this the PCIe controllers also
gains interconnect path definitions. The LLCC register layout is
corrected, and the UFS PHY is associated with its GDSC.
On the SM8550 development boards speaker port mapping is added. WiFi
support is finally enabled on the QRD board.
The new AIM300 development platform/board is introduced.
For SM8650 video and camera clock controller are introduced. SCM node
gains details necessary to trigger USB ramdump (download mode) upon a
system crash.
WiFi support and speaker port mapping is added to the QRD and the newly
introduced HDK. On the MTP the USB Type-C connector is describe to be
routed to the PHY.
In addition to the base HDK, a Display Card overlay is also introduced.
For X1 Elite bwmon, fastrpc and GPU support, tsens, and the missing PCIe
6a instance are added. Thermal zones are described. Pmic-glink is
introduced for both CRD and QCP devices, and remaining PMICs are
described. Audio support is also added to the QCP.
An explicit, larger, chunk of CMA memory is added to the various
devices, in order to compensate for the lack of IOMMU for PCIe.
Across a wide range of platforms, the thermal zone polling delays are
removed as supplies are interrupt driven anyways. Also thermal related
is the introduction of GPU thermal throttling, across many SoCs.
The old SMSM implementation is finally transitioned to using the
mailbox-based description and implementation for invoking interrupts on
remote processors. As such interrupt-triggering is converted to use this
mechanism on related platforms.
The usb-role-switch property is removed for all USB instances hard coded
to either host or peripheral across a range of boards.
* tag 'qcom-arm64-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (279 commits)
dt-bindings: arm: qcom: Document samsung,ms013g
arm64: dts: qcom: Add device tree for ASUS Vivobook S 15
dt-bindings: arm: qcom: Add ASUS Vivobook S 15
arm64: dts: qcom: qrb4210-rb2: Correct max current draw for VBUS
arm64: dts: qcom: msm8998: add venus node
arm64: dts: qcom: sa8775p-ride-r3: add new board file
arm64: dts: qcom: move common parts for sa8775p-ride variants into a .dtsi
dt-bindings: arm: qcom: add sa8775p-ride Rev 3
arm64: dts: qcom: sm8550-qrd: add port mapping to speakers
arm64: dts: qcom: sm8550-mtp: add port mapping to speakers
arm64: dts: qcom: sm8550-hdk: add port mapping to speakers
arm64: dts: qcom: sm8650-qrd: add port mapping to speakers
arm64: dts: qcom: sm8650-mtp: add port mapping to speakers
arm64: dts: qcom: sm8650-hdk: add port mapping to speakers
arm64: dts: qcom: sm7225-fairphone-fp4: Name the regulators
arm64: dts: qcom: pm8916: correct thermal zone name
arm64: dts: qcom: x1e80100: Add gpu support
arm64: dts: qcom: x1e80100: Fix USB HS PHY 0.8V supply
arm64: dts: qcom: qcs6490-rb3gen2: enable hdmi bridge
arm64: dts: qcom: sm6115: add resets for sdhc_1
...
Link: https://lore.kernel.org/r/20240706173140.18887-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt
mvebu dt64 for 6.11 (part 1)
armada-3720: align GPIO keys and LED node namee with bindings
Add description for solidrun cn9130 som and clearfog boards
* tag 'mvebu-dt64-6.11-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: add description for solidrun cn9132 cex7 module and clearfog board
arm64: dts: add description for solidrun cn9131 solidwan board
arm64: dts: add description for solidrun cn9130 som and clearfog boards
dt-bindings: arm64: marvell: add solidrun cn9132 CEX-7 evaluation board
dt-bindings: arm64: marvell: add solidrun cn9130 som based boards
arm64: dts: armada-3720: align LED node name with bindings
arm64: dts: armada-3720: align GPIO keys node name with bindings
Link: https://lore.kernel.org/r/87wmlzixln.fsf@BLaptop.bootlin.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.11
Generic Fixups/Cleanups:
- main_pktdma reg ranges fixes
- dtbs_check warning cleanups with addition of cpsw-mac-efuse node and
dropping "syscon", "simple-mfd" compatibles in favor of simple-bus
- Disable McASP FIFOs across SoCs for better latency
- Add memory node to bootloader stage with bootph-all
- Restructure am62p and j722s dtsi for share nodes across these SoCs
- DT warning fixes around USB type-C connector node (AM62/AM62P)
SoC Specific features and Fixes:
AM62
- GPMC and ELM addition
AM62A
- Enable RTC by default
- Crypto accelerator support
AM64 and AM65
- PRU system event support
AM69/J784S4:
- CPSW2G and CPSW9G addition with QSGMII and UXSGMII board support
- PCIe, USB, McASP, EHRPWM node additions
AM67/J722s
- Fix to update GPIO count
- Add gpio-ranges definition
- McASP support for audio
- PCIe, USB, Serdes support
Board Specific features and fixes:
AM62
- am62x-phyboard-lyra carrier board support
- am625-verdin: nau8822 PLL support
- sk: CMA node addition
- lp-sk: NAND expansion card overlay
AM62A
- New phyboard-lyra-am62ax from phytec
- CMA node addition
AM64:
- phycore-board: PMIC support
- hummingbird-t: RS485 RTS pin polarity update
- am6xx-phycore-som: overlays for variants w/o SPI, RTC, ETH PHY or w/
QSPI
- EVM: GPMC NAND expansion card overlay
- EVM: ICSSG ethernet MII mode overlay support
- SK: power supply temp sensors support
AM68
- SK: PMIC, OSPI
J721e
- SK: MCAN Support
- Overlay for infotainment expansion board
AM69/J784S4
- EVM: PCIe RC/EP, USB3, MCAN support
- SK: PMIC support
* tag 'ti-k3-dt-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (89 commits)
arm64: dts: ti: k3-am62a7-sk: Reserve 576MiB of global CMA
arm64: dts: ti: k3-am62x-sk-common: Reserve 128MiB of global CMA
arm64: dts: ti: k3-am62x-sk-common: Fix graph_child_address warns
arm64: dts: ti: k3-am62p5-sk: fix graph_child_address warnings
arm64: dts: ti: k3-j722s: Add gpio-ranges properties
arm64: dts: ti: k3-am62p: Add gpio-ranges properties
arm64: dts: ti: k3-pinctrl: Define a generic GPIO MUX Mode
arm64: dts: ti: k3-am62: Add cpsw-mac-efuse node to wkup_conf
arm64: dts: ti: k3-am62a: Add cpsw-mac-efuse node to wkup_conf
arm64: dts: ti: k3-j784s4: Add cpsw-mac-efuse node to mcu_conf
arm64: dts: ti: k3-j721s2: Add cpsw-mac-efuse node to mcu_conf
arm64: dts: ti: k3-j721e: Add cpsw-mac-efuse node to mcu_conf
arm64: dts: ti: k3-j7200: Add cpsw-mac-efuse node to mcu_conf
arm64: dts: ti: k3-am65: Add cpsw-mac-efuse node to mcu_conf
arm: dts: k3-am642-evm-nand: Add bootph-all to NAND related nodes
arm64: dts: ti: Add basic support for phyBOARD-Lyra-AM62Ax
dt-bindings: arm: ti: Add bindings for PHYTEC AM62Ax based hardware
arm64: dts: ti: Add am62x-phyboard-lyra carrier board
arm64: dts: ti: k3-am62a: Enable AUDIO_REFCLKx
arm64: dts: ti: k3-j784s4-evm: Enable analog audio support
...
Link: https://lore.kernel.org/r/37f251a1-f3bd-402f-ab22-cf786c3871d7@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.11, round 1
Highlights:
----------
-MCU:
- Add syscfg missing clock on stm32f429.
- MPU:
- STM32MP13:
- Add camera support on stm32mp135f-dk bord using DCMIPP and
GC2145 sensor.
- Document PWM output for stm32mp135f-dk
- Add goodix touchscreen support on stm32mp135f-dk board.
- Add new DH DHCOR / DHSBC board (Som + carrier board) based on
STM32MP135F SoC.
SOM part contains: STM32MP135F SoC, 512MB DDR2L RAM and
eMMC/SDIO wifi module.
The carrier boards embedds 2 RGMII ETH ports, USB-A,USB-C
and an extansion connector.
- Add Ethernet controller support on stm32mp135f-dk.
It uses LAN8742A PHY based on RMII.
- STMP32MP15:
- Rework Octavo OSD32MP1 split for USB phy.
- Add OP-TEE IRQ for asynchronous notification support.
It allows OP-TEE to trig Linux.
- STM32MP25:
- Add OP-TEE IRQ for asynchronous notification support.
It allows OP-TEE to trig Linux.
- Enable firewall for RCC.
- Add all U(s)ART nodes for stm32mp25.
- Add 3 power domains for low power modes.
- Add HPDMA support.
- Add Ethernet controller (ETH2) support on stm32mp257f-ev1.
It uses Realtek PHY based on RGMII.
- Add and enable SCMI regulator support.
* tag 'stm32-dt-for-v6.11-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (31 commits)
arm64: dts: st: describe power supplies for stm32mp257f-ev1 board
arm64: dts: st: add scmi regulators on stm32mp25
regulator: Add STM32MP25 regulator bindings
ARM: dts: stm32: omit unused pinctrl groups from stm32mp13 dtb files
arm64: dts: st: enable Ethernet2 on stm32mp257f-ev1 board
arm64: dts: st: add eth2 pinctrl entries in stm32mp25-pinctrl.dtsi
arm64: dts: st: add ethernet1 and ethernet2 support on stm32mp25
arm64: dts: st: add HPDMA nodes on stm32mp251
ARM: dts: stm32: Add ethernet support for DH STM32MP13xx DHCOR DHSBC board
ARM: dts: stm32: order stm32mp13-pinctrl nodes
ARM: dts: stm32: add ethernet1 for STM32MP135F-DK board
ARM: dts: stm32: add ethernet1/2 RMII pins for STM32MP13F-DK board
ARM: dts: stm32: add ethernet1 and ethernet2 support on stm32mp13
ARM: dts: stm32: Document output pins for PWMs on stm32mp135f-dk
ARM: dts: stm32: OP-TEE async notif interrupt for ST STM32MP15x boards
ARM: dts: stm32: Missing clocks for stm32f429's syscfg.
ARM: dts: stm32: Add support for STM32MP13xx DHCOR SoM and DHSBC board
ARM: dts: stm32: Add pinmux nodes for DH electronics STM32MP13xx DHCOR SoM and DHSBC board
dt-bindings: arm: stm32: Add compatible string for DH electronics STM32MP13xx DHCOR DHSBC board
ARM: dts: stm32: osd32: move pwr_regulators to common
...
Link: https://lore.kernel.org/r/8f10bd29-d067-4060-89ff-2e1a605f3141@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner SoC device tree changes for 6.11
This includes a commit shared with the clk tree. This commit adds clock
and reset indices to the device tree binding, and thus is needed for
both the device tree and driver changes.
ARM64 device tree and binding-only changes
- Add LRADC (low resolution ADC for resistor network based keys) for H616 SoC
- Add cache information for A64, H6, and H616 SoCs
- Correct model names and descriptions for Pine64 boards
- Add GPADC (general purpose ADC) for H616 SoC
- Add ADC joysticks based on GPADC for anbernic-rg35xx-h board
- Add additional CPU OPPs for the H700 on top of existing H616 ones
- Enable DVFS for rg35xx boards
- Add IOMMU for H616 SoC
RISC-V device tree changes
- Add system LDOs to D1s/T113 SoC
- Add ClockworkPi and DevTerm device trees
* tag 'sunxi-dt-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
riscv: dts: allwinner: Add ClockworkPi and DevTerm devicetrees
riscv: dts: allwinner: d1s-t113: Add system LDOs
arm64: dts: allwinner: h616: add IOMMU node
arm64: dts: allwinner: rg35xx: Enable DVFS CPU frequency scaling
arm64: dts: allwinner: h616: add additional CPU OPPs for the H700
arm64: dts: allwinner: anbernic-rg35xx-h: Add ADC joysticks
arm64: dts: allwinner: h616: Add GPADC device node
dt-bindings: clock: sun50i-h616-ccu: Add GPADC clocks
ARM: dts: sunxi: remove duplicated entries in makefile
arm64: dts: allwinner: Add cache information to the SoC dtsi for H616
arm64: dts: allwinner: Add cache information to the SoC dtsi for A64
arm64: dts: allwinner: Correct the model names for Pine64 boards
dt-bindings: arm: sunxi: Correct the descriptions for Pine64 boards
arm64: dts: allwinner: Add cache information to the SoC dtsi for H6
ARM: dts: sun50i: Add LRADC node
dt-bindings: input: sun4i-lradc-keys: Add H616 compatible
Link: https://lore.kernel.org/r/ZoQa8r1N8yi7FlPV@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree change for 6.11:
- New board support: imx8mm-iot-gateway, imx93-9x9-qsb, imx95-19x19-evk,
imx8mp-tqma8mpql-mba8mp-ras314, etc.
- A series from Adam Ford that improves imx8mp-beacon-kit support by
fixing dtschema issues and enabling HDMI bridge HPD
- A set of changes from Alexander Stein that adds partitions subnode
to spi-nor
- A great number of changes from Frank Li that add audio, flexcan, gpmi
related devices for imx8dxl, imx8qm based boards
- A bunch of layerscape dtschema issue fixes from Frank Li
- A series from Krzysztof Kozlowski to use defines for interrupts
- A number of improvements on i.MX8MP DHCOM devices from Marek Vasut
- A couple of changes from Parthiban Nallathambi that add PCIe PHY and
RS232/RS485 overlays for phygate-tauri-l board
- A series from Shengjiu Wang that adds bt-sco and XCVR sound card
support for imx8mp-evk
- A series from Tim Harvey that fixes dt-schema warnings and adds DP83867
configuration for i.MX8M Venice devices
- Other random feature additions and improvments on various boards
* tag 'imx-dt64-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (91 commits)
arm64: dts: imx8mp: Remove 'snps,rx-sched-sp'
arm64: dts: imx8mm-verdin: add TPM device
arm64: dts: imx8mp-evk: Add audio XCVR sound card
arm64: dts: imx8mp: Add audio XCVR device node
arm64: dts: imx8mp: Update Fast ethernet PHY MDIO addresses to match DH i.MX8MP DHCOM rev.200
arm64: dts: imx8mp: Do not reconfigure Audio PLL2 on DH i.MX8M Plus DHCOM SoM
arm64: dts: layerscape: rename b(q)man-portals to b(q)man-portals-bus
arm64: dts: fsl-ls1046a: rename thermal node name
arm64: dts: fsl-ls1043a: remove unused clk-name at watchdog node
arm64: dts: layerscape: rename aux_bus to aux-bus
arm64: dts: layerscape: change pcie interrupt order
arm64: dts: layerscape: rename node name "wdt" to "watchdog"
arm64: dts: layerscape: add #dma-cells for qdma
arm64: dts: layerscape: remove compatible string 'fsl,fman-xmdio' for fman3
arm64: dts: layerscape: replace node name 'nor' with 'flash'
arm64: dts: fsl-ls1012a: remove property 'snps,host-vbus-glitches'
arm64: dts: fsl-lx2160a: fix #address-cells for pinctrl-single
arm64: dts: layerscape: add platform special compatible string for gpio
arm64: dts: layerscape: rename node 'timer' as 'rtc'
arm64: dts: imx8qxp-mek: Pass memory-region to the DSP node
...
Link: https://lore.kernel.org/r/20240702142153.413061-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The ROCK 5 ITX as the name suggests is made in the ITX form factor and
actually built in a form to be used in a regular case even providing
connectors for regular front-panel io.
It can be powered either by 12V, ATX power-supply or PoE.
Notable peripherals are the 4 SATA ports, M.2 M-Key slot, M.2 E-key slot,
2*2.5Gb PCIe-connected Ethernet NICs.
As of yet unsupported display options consist of 2*HDMI, DP via USB-c,
eDP + 2*DSI via PCB connectors.
USB ports are 4*USB3 + 2*USB2 on the back panel and 2-port front-panel
connector.
Schematics for the board can be found on
- https://dl.radxa.com/rock5/5itx/radxa_rock_5_itx_X1100_schematic.pdf
- https://dl.radxa.com/rock5/5itx/v1110/radxa_rock_5itx_v1110_schematic.pdf
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240704153815.837392-3-heiko@sntech.de
|
|
Similar to bf6f26deb0e8 ("arm64: dts: rockchip: Add dma-names to uart1
on quartz64-b") also add the dma-names property to the other rk3566
devices from Pine64 with bluetooth functionality.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Tested-by: Riley Trautman <asonix.dev@gmail.com>
Link: https://lore.kernel.org/r/20240705163004.29678-4-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Pine64's Rock64 was missing the avdd supply properties on the hdmi node,
causing the following warnings:
dwhdmi-rockchip ff3c0000.hdmi: supply avdd-0v9 not found, using dummy regulator
dwhdmi-rockchip ff3c0000.hdmi: supply avdd-1v8 not found, using dummy regulator
In the Rock64 Schematic document version 2.0 those supplies are marked
as DVIDEO_AVDD_1V0 and DVIDEO_AVDD_1V8 respectively, but in version 3.0
those are named HDMI_AVDD_1V0 and HDMI_AVDD_1V8, which is a bit clearer.
In both versions those are connected to LDO3 and LDO1 respectively.
While the DeviceTree property is named 'avdd-0v9-supply' the
'rockchip,dw-hdmi.yaml' binding document notes the following:
A 0.9V supply that powers up the SoC internal circuitry. The actual
pin name varies between the different SoCs and is usually
HDMI_TX_AVDD_0V9 or sometimes HDMI_AVDD_1V0.
So the 'vdd_10' reference is not an error.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20240704191919.38856-1-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
Minor improvements in ARM64 DTS for v6.11
Few cleanups and improvements which were missed by their maintainers:
1. Spreadtrum: correct PMU nodes - split per clusters.
2. HiSilicon: add dedicated compatible to syscon node ("syscon" alone is
not allowed).
3. APM: add dedicated compatible to syscon node (binding applied to MFD
tree).
* tag 'dt64-cleanup-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
arm64: dts: apm: Add dedicated syscon poweroff compatibles
arm64: dts: hisilicon: hi3660: add dedicated hi3660-usb3-otg-bc compatible
dt-bindings: soc: hisilicon: document hi3660-usb3-otg-bc
arm64: dts: sprd: Split PMU nodes for heterogeneous CPUs
Link: https://lore.kernel.org/r/20240702065359.7378-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.10
1. Google GS101: Minor cleanup and add fake regulators to USB phy, to
satisfy dtbs_check. The PMIC providing these regulators is not yet
implemented.
2. Exynos850: Add True Random Number Generator.
* tag 'samsung-dt64-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos850: Enable TRNG
arm64: dts: exynos: gs101-oriole: add placeholder regulators for USB phy
arm64: dts: exynos: gs101: reorder properties as per guidelines
Link: https://lore.kernel.org/r/20240702063514.6215-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.11-rc1
This contains one patch that reworks the device tree structure for
Jetson Orin NX and Jetson Orin Nano, which are both within the same
family. This restructuring makes it easier to extend both platforms
in a consistent way in the future.
* tag 'tegra-for-6.11-arm64-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Restructure Orin NX/Nano device tree
Link: https://lore.kernel.org/r/20240628210818.3627404-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
