| Age | Commit message (Collapse) | Author |
|---|
|
Cross-merge networking fixes after downstream PR.
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-01-26
We've added 107 non-merge commits during the last 4 day(s) which contain
a total of 101 files changed, 6009 insertions(+), 1260 deletions(-).
The main changes are:
1) Add BPF token support to delegate a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application. With addressed changes from Christian
and Linus' reviews, from Andrii Nakryiko.
2) Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops type,
from Kui-Feng Lee.
3) Add support for retrieval of cookies for perf/kprobe multi links,
from Jiri Olsa.
4) Bigger batch of prep-work for the BPF verifier to eventually support
preserving boundaries and tracking scalars on narrowing fills,
from Maxim Mikityanskiy.
5) Extend the tc BPF flavor to support arbitrary TCP SYN cookies to help
with the scenario of SYN floods, from Kuniyuki Iwashima.
6) Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF objects,
from Hou Tao.
7) Extend BPF verifier to track aligned ST stores as imprecise spilled
registers, from Yonghong Song.
8) Several fixes to BPF selftests around inline asm constraints and
unsupported VLA code generation, from Jose E. Marchesi.
9) Various updates to the BPF IETF instruction set draft document such
as the introduction of conformance groups for instructions,
from Dave Thaler.
10) Fix BPF verifier to make infinite loop detection in is_state_visited()
exact to catch some too lax spill/fill corner cases,
from Eduard Zingerman.
11) Refactor the BPF verifier pointer ALU check to allow ALU explicitly
instead of implicitly for various register types, from Hao Sun.
12) Fix the flaky tc_redirect_dtime BPF selftest due to slowness
in neighbor advertisement at setup time, from Martin KaFai Lau.
13) Change BPF selftests to skip callback tests for the case when the
JIT is disabled, from Tiezhu Yang.
14) Add a small extension to libbpf which allows to auto create
a map-in-map's inner map, from Andrey Grafin.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (107 commits)
selftests/bpf: Add missing line break in test_verifier
bpf, docs: Clarify definitions of various instructions
bpf: Fix error checks against bpf_get_btf_vmlinux().
bpf: One more maintainer for libbpf and BPF selftests
selftests/bpf: Incorporate LSM policy to token-based tests
selftests/bpf: Add tests for LIBBPF_BPF_TOKEN_PATH envvar
libbpf: Support BPF token path setting through LIBBPF_BPF_TOKEN_PATH envvar
selftests/bpf: Add tests for BPF object load with implicit token
selftests/bpf: Add BPF object loading tests with explicit token passing
libbpf: Wire up BPF token support at BPF object level
libbpf: Wire up token_fd into feature probing logic
libbpf: Move feature detection code into its own file
libbpf: Further decouple feature checking logic from bpf_object
libbpf: Split feature detectors definitions from cached results
selftests/bpf: Utilize string values for delegate_xxx mount options
bpf: Support symbolic BPF FS delegation mount options
bpf: Fail BPF_TOKEN_CREATE if no delegation option was set on BPF FS
bpf,selinux: Allocate bpf_security_struct per BPF token
selftests/bpf: Add BPF token-enabled tests
libbpf: Add BPF token support to bpf_prog_load() API
...
====================
Link: https://lore.kernel.org/r/20240126215710.19855-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/fixes
Samsung fixes for v6.8
1. Google GS101: Correct the input clock names to CMU MISC clock
controller to match received review. The review was initially missed
and CMU MISC clock controller bindings, driver and DTS was merged
into v6.8-rc1 with different names. Nothing was released so far, so
the bindings and driver can be still corrected to match review.
2. Samsung Galaxy Tab3: Fix display by using correct vclk polarity in
display node.
* tag 'samsung-fixes-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos4212-tab3: add samsung,invert-vclk flag to fimd
arm64: dts: exynos: gs101: comply with the new cmu_misc clock names
Link: https://lore.kernel.org/r/20240125082400.163935-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Since commit 26c9d152ebf3 ("dt-bindings: tpm: Consolidate TCG TIS
bindings"), several issues are reported by "make dtbs_check" for arm64
devicetrees:
The compatible property needs to contain the chip's name in addition to
the generic "tcg,tpm_tis-spi" and the nodename needs to be "tpm@0"
rather than "cr50@0":
tpm@1: compatible: ['tcg,tpm_tis-spi'] is too short
from schema $id: http://devicetree.org/schemas/tpm/tcg,tpm_tis-spi.yaml#
cr50@0: $nodename:0: 'cr50@0' does not match '^tpm(@[0-9a-f]+)?$'
from schema $id: http://devicetree.org/schemas/tpm/google,cr50.yaml#
Fix these schema violations.
phyGATE-Tauri uses an Infineon SLB9670:
https://lore.kernel.org/all/ab45c82485fa272f74adf560cbb58ee60cc42689.camel@phytec.de/
Gateworks Venice uses an Atmel ATTPM20P:
https://trac.gateworks.com/wiki/tpm
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
ARM64 bpf jit satisfies the following two conditions:
1) support BPF_XCHG() on pointer-sized word.
2) the implementation of xchg is the same as atomic_xchg() on
pointer-sized words. Both of these two functions use arch_xchg() to
implement the exchange.
So enable the inline of bpf_kptr_xchg() for arm64 bpf jit.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20240119102529.99581-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The cmu_misc clock-names were renamed to just "bus" and "sss" because
naming is local to the module, so cmu_misc is implied. As the bindings
and the device tree have not made a release yet, comply with the
renamed clocks.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240109114908.3623645-3-tudor.ambarus@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"I think the main one is fixing the dynamic SCS patching when full LTO
is enabled (clang was silently getting this horribly wrong), but it's
all good stuff.
Rob just pointed out that the fix to the workaround for erratum
#2966298 might not be necessary, but in the worst case it's harmless
and since the official description leaves a little to be desired here,
I've left it in.
Summary:
- Fix shadow call stack patching with LTO=full
- Fix voluntary preemption of the FPSIMD registers from assembly code
- Fix workaround for A520 CPU erratum #2966298 and extend to A510
- Fix SME issues that resulted in corruption of the register state
- Minor fixes (missing includes, formatting)"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix silcon-errata.rst formatting
arm64/sme: Always exit sme_alloc() early with existing storage
arm64/fpsimd: Remove spurious check for SVE support
arm64/ptrace: Don't flush ZA/ZT storage when writing ZA via ptrace
arm64: entry: simplify kernel_exit logic
arm64: entry: fix ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
arm64: errata: Add Cortex-A510 speculative unprivileged load workaround
arm64: Rename ARM64_WORKAROUND_2966298
arm64: fpsimd: Bring cond_yield asm macro in line with new rules
arm64: scs: Work around full LTO issue with dynamic SCS
arm64: irq: include <linux/cpumask.h>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Fix race conditions in device probe path
- Retire IOMMU bus_ops
- Support for passing custom allocators to page table drivers
- Clean up Kconfig around IOMMU_SVA
- Support for sharing SVA domains with all devices bound to a mm
- Firmware data parsing cleanup
- Tracing improvements for iommu-dma code
- Some smaller fixes and cleanups
ARM-SMMU drivers:
- Device-tree binding updates:
- Add additional compatible strings for Qualcomm SoCs
- Document Adreno clocks for Qualcomm's SM8350 SoC
- SMMUv2:
- Implement support for the ->domain_alloc_paging() callback
- Ensure Secure context is restored following suspend of Qualcomm
SMMU implementation
- SMMUv3:
- Disable stalling mode for the "quiet" context descriptor
- Minor refactoring and driver cleanups
Intel VT-d driver:
- Cleanup and refactoring
AMD IOMMU driver:
- Improve IO TLB invalidation logic
- Small cleanups and improvements
Rockchip IOMMU driver:
- DT binding update to add Rockchip RK3588
Apple DART driver:
- Apple M1 USB4/Thunderbolt DART support
- Cleanups
Virtio IOMMU driver:
- Add support for iotlb_sync_map
- Enable deferred IO TLB flushes"
* tag 'iommu-updates-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits)
iommu: Don't reserve 0-length IOVA region
iommu/vt-d: Move inline helpers to header files
iommu/vt-d: Remove unused vcmd interfaces
iommu/vt-d: Remove unused parameter of intel_pasid_setup_pass_through()
iommu/vt-d: Refactor device_to_iommu() to retrieve iommu directly
iommu/sva: Fix memory leak in iommu_sva_bind_device()
dt-bindings: iommu: rockchip: Add Rockchip RK3588
iommu/dma: Trace bounce buffer usage when mapping buffers
iommu/arm-smmu: Convert to domain_alloc_paging()
iommu/arm-smmu: Pass arm_smmu_domain to internal functions
iommu/arm-smmu: Implement IOMMU_DOMAIN_BLOCKED
iommu/arm-smmu: Convert to a global static identity domain
iommu/arm-smmu: Reorganize arm_smmu_domain_add_master()
iommu/arm-smmu-v3: Remove ARM_SMMU_DOMAIN_NESTED
iommu/arm-smmu-v3: Master cannot be NULL in arm_smmu_write_strtab_ent()
iommu/arm-smmu-v3: Add a type for the STE
iommu/arm-smmu-v3: disable stall for quiet_cd
iommu/qcom: restore IOMMU state if needed
iommu/arm-smmu-qcom: Add QCM2290 MDSS compatible
iommu/arm-smmu-qcom: Add missing GMU entry to match table
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.8-rc1.
Included in here are the following:
- Thunderbolt subsystem and driver updates for USB 4 hardware and
issues reported by real devices
- xhci driver updates
- dwc3 driver updates
- uvc_video gadget driver updates
- typec driver updates
- gadget string functions cleaned up
- other small changes
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'usb-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits)
usb: typec: tipd: fix use of device-specific init function
usb: typec: tipd: Separate reset for TPS6598x
usb: mon: Fix atomicity violation in mon_bin_vma_fault
usb: gadget: uvc: Remove nested locking
usb: gadget: uvc: Fix use are free during STREAMOFF
usb: typec: class: fix typec_altmode_put_partner to put plugs
dt-bindings: usb: dwc3: Limit num-hc-interrupters definition
dt-bindings: usb: xhci: Add num-hc-interrupters definition
xhci: add support to allocate several interrupters
USB: core: Use device_driver directly in struct usb_driver and usb_device_driver
arm64: dts: mediatek: mt8195: Add 'rx-fifo-depth' for cherry
usb: xhci-mtk: fix a short packet issue of gen1 isoc-in transfer
dt-bindings: usb: mtk-xhci: add a property for Gen1 isoc-in transfer issue
arm64: dts: qcom: msm8996: Remove PNoC clock from MSS
arm64: dts: qcom: msm8996: Remove AGGRE2 clock from SLPI
arm64: dts: qcom: msm8998: Remove AGGRE2 clock from SLPI
arm64: dts: qcom: msm8939: Drop RPM bus clocks
arm64: dts: qcom: sdm630: Drop RPM bus clocks
arm64: dts: qcom: qcs404: Drop RPM bus clocks
arm64: dts: qcom: msm8996: Drop RPM bus clocks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here are the set of driver core and kernfs changes for 6.8-rc1.
Nothing major in here this release cycle, just lots of small cleanups
and some tweaks on kernfs that in the very end, got reverted and will
come back in a safer way next release cycle.
Included in here are:
- more driver core 'const' cleanups and fixes
- fw_devlink=rpm is now the default behavior
- kernfs tiny changes to remove some string functions
- cpu handling in the driver core is updated to work better on many
systems that add topologies and cpus after booting
- other minor changes and cleanups
All of the cpu handling patches have been acked by the respective
maintainers and are coming in here in one series. Everything has been
in linux-next for a while with no reported issues"
* tag 'driver-core-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (51 commits)
Revert "kernfs: convert kernfs_idr_lock to an irq safe raw spinlock"
kernfs: convert kernfs_idr_lock to an irq safe raw spinlock
class: fix use-after-free in class_register()
PM: clk: make pm_clk_add_notifier() take a const pointer
EDAC: constantify the struct bus_type usage
kernfs: fix reference to renamed function
driver core: device.h: fix Excess kernel-doc description warning
driver core: class: fix Excess kernel-doc description warning
driver core: mark remaining local bus_type variables as const
driver core: container: make container_subsys const
driver core: bus: constantify subsys_register() calls
driver core: bus: make bus_sort_breadthfirst() take a const pointer
kernfs: d_obtain_alias(NULL) will do the right thing...
driver core: Better advertise dev_err_probe()
kernfs: Convert kernfs_path_from_node_locked() from strlcpy() to strscpy()
kernfs: Convert kernfs_name_locked() from strlcpy() to strscpy()
kernfs: Convert kernfs_walk_ns() from strlcpy() to strscpy()
initramfs: Expose retained initrd as sysfs file
fs/kernfs/dir: obey S_ISGID
kernel/cgroup: use kernfs_create_dir_ns()
...
|
|
When sme_alloc() is called with existing storage and we are not flushing we
will always allocate new storage, both leaking the existing storage and
corrupting the state. Fix this by separating the checks for flushing and
for existing storage as we do for SVE.
Callers that reallocate (eg, due to changing the vector length) should
call sme_free() themselves.
Fixes: 5d0a8d2fba50 ("arm64/ptrace: Ensure that SME is set up for target when writing SSVE state")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240115-arm64-sme-flush-v1-1-7472bd3459b7@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
There is no need to check for SVE support when changing vector lengths,
even if the system is SME only we still need SVE storage for the streaming
SVE state.
Fixes: d4d5be94a878 ("arm64/fpsimd: Ensure SME storage is allocated after SVE VL changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240115-arm64-sve-enabled-check-v1-1-a26360b00f6d@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When writing ZA we currently unconditionally flush the buffer used to store
it as part of ensuring that it is allocated. Since this buffer is shared
with ZT0 this means that a write to ZA when PSTATE.ZA is already set will
corrupt the value of ZT0 on a SME2 system. Fix this by only flushing the
backing storage if PSTATE.ZA was not previously set.
This will mean that short or failed writes may leave stale data in the
buffer, this seems as correct as our current behaviour and unlikely to be
something that userspace will rely on.
Fixes: f90b529bcbe5 ("arm64/sme: Implement ZT0 ptrace support")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240115-arm64-fix-ptrace-za-zt-v1-1-48617517028a@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
For historical reasons, the non-KPTI exception return path is duplicated for
EL1 and EL0, with the structure:
.if \el == 0
[ KPTI handling ]
ldr lr, [sp, #S_LR]
add sp, sp, #PT_REGS_SIZE // restore sp
[ EL0 exception return workaround ]
eret
.else
ldr lr, [sp, #S_LR]
add sp, sp, #PT_REGS_SIZE // restore sp
[ EL1 exception return workaround ]
eret
.endif
sb
This would be simpler and clearer with the common portions factored out,
e.g.
.if \el == 0
[ KPTI handling ]
.endif
ldr lr, [sp, #S_LR]
add sp, sp, #PT_REGS_SIZE // restore sp
.if \el == 0
[ EL0 exception return workaround ]
.else
[ EL1 exception return workaround ]
.endif
eret
sb
This expands to the same code, but is simpler for a human to follow as
it avoids duplicates the restore of LR+SP, and makes it clear that the
ERET is associated with the SB.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240116110221.420467-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently the ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD workaround isn't
quite right, as it is supposed to be applied after the last explicit
memory access, but is immediately followed by an LDR.
The ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD workaround is used to
handle Cortex-A520 erratum 2966298 and Cortex-A510 erratum 3117295,
which are described in:
* https://developer.arm.com/documentation/SDEN2444153/0600/?lang=en
* https://developer.arm.com/documentation/SDEN1873361/1600/?lang=en
In both cases the workaround is described as:
| If pagetable isolation is disabled, the context switch logic in the
| kernel can be updated to execute the following sequence on affected
| cores before exiting to EL0, and after all explicit memory accesses:
|
| 1. A non-shareable TLBI to any context and/or address, including
| unused contexts or addresses, such as a `TLBI VALE1 Xzr`.
|
| 2. A DSB NSH to guarantee completion of the TLBI.
The important part being that the TLBI+DSB must be placed "after all
explicit memory accesses".
Unfortunately, as-implemented, the TLBI+DSB is immediately followed by
an LDR, as we have:
| alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
| tlbi vale1, xzr
| dsb nsh
| alternative_else_nop_endif
| alternative_if_not ARM64_UNMAP_KERNEL_AT_EL0
| ldr lr, [sp, #S_LR]
| add sp, sp, #PT_REGS_SIZE // restore sp
| eret
| alternative_else_nop_endif
|
| [ ... KPTI exception return path ... ]
This patch fixes this by reworking the logic to place the TLBI+DSB
immediately before the ERET, after all explicit memory accesses.
The ERET is currently in a separate alternative block, and alternatives
cannot be nested. To account for this, the alternative block for
ARM64_UNMAP_KERNEL_AT_EL0 is replaced with a single alternative branch
to skip the KPTI logic, with the new shape of the logic being:
| alternative_insn "b .L_skip_tramp_exit_\@", nop, ARM64_UNMAP_KERNEL_AT_EL0
| [ ... KPTI exception return path ... ]
| .L_skip_tramp_exit_\@:
|
| ldr lr, [sp, #S_LR]
| add sp, sp, #PT_REGS_SIZE // restore sp
|
| alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
| tlbi vale1, xzr
| dsb nsh
| alternative_else_nop_endif
| eret
The new structure means that the workaround is only applied when KPTI is
not in use; this is fine as noted in the documented implications of the
erratum:
| Pagetable isolation between EL0 and higher level ELs prevents the
| issue from occurring.
... and as per the workaround description quoted above, the workaround
is only necessary "If pagetable isolation is disabled".
Fixes: 471470bc7052 ("arm64: errata: Add Cortex-A520 speculative unprivileged load workaround")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240116110221.420467-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- The i.MX DSP remoteproc driver adds support for providing a resource
table, in order to enable IPC with the core
- The TI K3 DSP driver is transitioned to remove_new, error messages
are changed to use symbolic error codes, and dev_err_probe() is used
where applicable
- Support for the Qualcomm SC7280 audio, compute and WiFi co-processors
are added to the Qualcomm TrustZone based remoteproc driver
* tag 'rproc-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: qcom_q6v5_pas: Add SC7280 ADSP, CDSP & WPSS
dt-bindings: remoteproc: qcom: sc7180-pas: Add SC7280 compatibles
dt-bindings: remoteproc: qcom: sc7180-pas: Fix SC7280 MPSS PD-names
remoteproc: k3-dsp: Convert to platform remove callback returning void
remoteproc: k3-dsp: Use symbolic error codes in error messages
remoteproc: k3-dsp: Suppress duplicate error message in .remove()
arm64: dts: imx8mp: Add reserve-memory nodes for DSP
remoteproc: imx_dsp_rproc: Add mandatory find_loaded_rsc_table op
|
|
Pull kvm updates from Paolo Bonzini:
"Generic:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all
architectures.
- Clean up Kconfigs that all KVM architectures were selecting
- New functionality around "guest_memfd", a new userspace API that
creates an anonymous file and returns a file descriptor that refers
to it. guest_memfd files are bound to their owning virtual machine,
cannot be mapped, read, or written by userspace, and cannot be
resized. guest_memfd files do however support PUNCH_HOLE, which can
be used to switch a memory area between guest_memfd and regular
anonymous memory.
- New ioctl KVM_SET_MEMORY_ATTRIBUTES allowing userspace to specify
per-page attributes for a given page of guest memory; right now the
only attribute is whether the guest expects to access memory via
guest_memfd or not, which in Confidential SVMs backed by SEV-SNP,
TDX or ARM64 pKVM is checked by firmware or hypervisor that
guarantees confidentiality (AMD PSP, Intel TDX module, or EL2 in
the case of pKVM).
x86:
- Support for "software-protected VMs" that can use the new
guest_memfd and page attributes infrastructure. This is mostly
useful for testing, since there is no pKVM-like infrastructure to
provide a meaningfully reduced TCB.
- Fix a relatively benign off-by-one error when splitting huge pages
during CLEAR_DIRTY_LOG.
- Fix a bug where KVM could incorrectly test-and-clear dirty bits in
non-leaf TDP MMU SPTEs if a racing thread replaces a huge SPTE with
a non-huge SPTE.
- Use more generic lockdep assertions in paths that don't actually
care about whether the caller is a reader or a writer.
- let Xen guests opt out of having PV clock reported as "based on a
stable TSC", because some of them don't expect the "TSC stable" bit
(added to the pvclock ABI by KVM, but never set by Xen) to be set.
- Revert a bogus, made-up nested SVM consistency check for
TLB_CONTROL.
- Advertise flush-by-ASID support for nSVM unconditionally, as KVM
always flushes on nested transitions, i.e. always satisfies flush
requests. This allows running bleeding edge versions of VMware
Workstation on top of KVM.
- Sanity check that the CPU supports flush-by-ASID when enabling SEV
support.
- On AMD machines with vNMI, always rely on hardware instead of
intercepting IRET in some cases to detect unmasking of NMIs
- Support for virtualizing Linear Address Masking (LAM)
- Fix a variety of vPMU bugs where KVM fail to stop/reset counters
and other state prior to refreshing the vPMU model.
- Fix a double-overflow PMU bug by tracking emulated counter events
using a dedicated field instead of snapshotting the "previous"
counter. If the hardware PMC count triggers overflow that is
recognized in the same VM-Exit that KVM manually bumps an event
count, KVM would pend PMIs for both the hardware-triggered overflow
and for KVM-triggered overflow.
- Turn off KVM_WERROR by default for all configs so that it's not
inadvertantly enabled by non-KVM developers, which can be
problematic for subsystems that require no regressions for W=1
builds.
- Advertise all of the host-supported CPUID bits that enumerate
IA32_SPEC_CTRL "features".
- Don't force a masterclock update when a vCPU synchronizes to the
current TSC generation, as updating the masterclock can cause
kvmclock's time to "jump" unexpectedly, e.g. when userspace
hotplugs a pre-created vCPU.
- Use RIP-relative address to read kvm_rebooting in the VM-Enter
fault paths, partly as a super minor optimization, but mostly to
make KVM play nice with position independent executable builds.
- Guard KVM-on-HyperV's range-based TLB flush hooks with an #ifdef on
CONFIG_HYPERV as a minor optimization, and to self-document the
code.
- Add CONFIG_KVM_HYPERV to allow disabling KVM support for HyperV
"emulation" at build time.
ARM64:
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB base
granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with a prefix
branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV support to
that version of the architecture.
- A small set of vgic fixes and associated cleanups.
Loongarch:
- Optimization for memslot hugepage checking
- Cleanup and fix some HW/SW timer issues
- Add LSX/LASX (128bit/256bit SIMD) support
RISC-V:
- KVM_GET_REG_LIST improvement for vector registers
- Generate ISA extension reg_list using macros in get-reg-list
selftest
- Support for reporting steal time along with selftest
s390:
- Bugfixes
Selftests:
- Fix an annoying goof where the NX hugepage test prints out garbage
instead of the magic token needed to run the test.
- Fix build errors when a header is delete/moved due to a missing
flag in the Makefile.
- Detect if KVM bugged/killed a selftest's VM and print out a helpful
message instead of complaining that a random ioctl() failed.
- Annotate the guest printf/assert helpers with __printf(), and fix
the various bugs that were lurking due to lack of said annotation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (185 commits)
x86/kvm: Do not try to disable kvmclock if it was not enabled
KVM: x86: add missing "depends on KVM"
KVM: fix direction of dependency on MMU notifiers
KVM: introduce CONFIG_KVM_COMMON
KVM: arm64: Add missing memory barriers when switching to pKVM's hyp pgd
KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
RISC-V: KVM: selftests: Add get-reg-list test for STA registers
RISC-V: KVM: selftests: Add steal_time test support
RISC-V: KVM: selftests: Add guest_sbi_probe_extension
RISC-V: KVM: selftests: Move sbi_ecall to processor.c
RISC-V: KVM: Implement SBI STA extension
RISC-V: KVM: Add support for SBI STA registers
RISC-V: KVM: Add support for SBI extension registers
RISC-V: KVM: Add SBI STA info to vcpu_arch
RISC-V: KVM: Add steal-update vcpu request
RISC-V: KVM: Add SBI STA extension skeleton
RISC-V: paravirt: Implement steal-time support
RISC-V: Add SBI STA extension definitions
RISC-V: paravirt: Add skeleton for pv-time support
RISC-V: KVM: Fix indentation in kvm_riscv_vcpu_set_reg_csr()
...
|
|
Implement the workaround for ARM Cortex-A510 erratum 3117295. On an
affected Cortex-A510 core, a speculatively executed unprivileged load
might leak data from a privileged load via a cache side channel. The
issue only exists for loads within a translation regime with the same
translation (e.g. same ASID and VMID). Therefore, the issue only affects
the return to EL0.
The erratum and workaround are the same as ARM Cortex-A520 erratum
2966298, so reuse the existing workaround.
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240110-arm-errata-a510-v1-2-d02bc51aeeee@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In preparation to apply ARM64_WORKAROUND_2966298 for multiple errata,
rename the kconfig and capability. No functional change.
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240110-arm-errata-a510-v1-1-d02bc51aeeee@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
We no longer disable softirqs or preemption when doing kernel mode SIMD,
and so for fully preemptible kernels, there is no longer a need to do any
explicit yielding (and for non-preemptible kernels, yielding is not
needed either).
That leaves voluntary preemption, where only explicit yield calls may
result in a reschedule. To retain the existing behavior for such a
configuration, we should take the new situation into account, where the
preempt count will be zero rather than one, and yielding to pending
softirqs is unnecessary.
Fixes: aefbab8e77eb ("arm64: fpsimd: Preserve/restore kernel mode NEON at context switch")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240111112447.577640-2-ardb+git@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Full LTO takes the '-mbranch-protection=none' passed to the compiler
when generating the dynamic shadow call stack patching code as a hint to
stop emitting PAC instructions altogether. (Thin LTO appears unaffected
by this)
Work around this by stripping unwind tables from the object in question,
which should be sufficient to prevent the patching code from attempting
to patch itself.
Fixes: 3b619e22c460 ("arm64: implement dynamic shadow call stack for Clang")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240110132619.258809-2-ardb+git@google.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Sorting include files in alphabetic order in
drivers/tty/serial/samsung.c revealed the following error:
In file included from drivers/tty/serial/samsung_tty.c:24:
./arch/arm64/include/asm/irq.h:9:43: error: unknown type name ‘cpumask_t’
9 | void arch_trigger_cpumask_backtrace(const cpumask_t *mask, int exclude_cpu);
| ^~~~~~~~~
Include cpumask.h to avoid unknown type errors for parents of irq.h that
don't include cpumask.h.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20240110074007.4020016-1-tudor.ambarus@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"As usual, the arm32 and arm64 defconfig files get changed to account
for added device drivers that can now be used.
The files are also refreshed to reflect the more recent Kconfig
changes that are going into v6.8"
* tag 'soc-defconfig-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
ARM: defconfig: remove dead platform options
ARM: defconfig: remove CONFIG_SLUB references
ARM: defconfig: remove CONFIG_NET_ETHERNET references
ARM: defconfig: remove sysfs-deprecated entries
ARM: defconfig: reorder config lines
arm64: defconfig reorder config lines
ARM: multi_v7_defconfig: Enable STM32 IPCC mailbox driver
arm64: defconfig: Enable Qualcomm SC8280XP camera clock controller
ARM: multi_v7_defconfig: Enable RPMSG CHAR and CTRL
ARM: multi_v7_defconfig: enable STM32 DCMIPP media support
arm64: defconfig: enable GPU clock controller for SM8[45]50
arm64: defconfig: Enable X1E80100 SoC base configs
arm64: defconfig: enable Qualcomm WSA884x driver
arm64: defconfig: enable Qualcomm UEFI Secure App driver
arm64: defconfig: enable Qualcomm sc8280xp sound drivers
arm64: defconfig: enable clock controller and pinctrl
arm64: defconfig: Enable DRM_POWERVR
arm64: defconfig: Enable configs for MT8195-Cherry-Tomato Chromebook
arm64: defconfig: Enable DA9211 regulator
arm64: deconfig: enable Qualcomm SM8650 SoC drivers
...
|
|
Pull SoC DT updates from Arnd Bergmann:
"There is one new SoC for each 32-bit Arm and 64-bit RISC-V, but both
the Rockchips rv1109 and Sopgho CV1812H are just minor variations of
already supported chips.
The other six new SoCs are all part of existing arm64 families, but
are somewhat more interesting:
- Samsung ExynosAutov920 is an automotive chip, and the first one we
support based on the Cortex-A78AE core with lockstep mode.
- Google gs101 (Tensor G1) is the chip used in a number of Pixel
phones, and is grouped with Samsung Exynos here since it is based
on the same SoC design, sharing most of its IP blocks with that
series.
- MediaTek MT8188 is a new chip used for mid-range tablets and
Chromebooks, using two Cortex-A78 cores where the older MT8195 had
four of them.
- Qualcomm SM8650 (Snapdragon 8 Gen 3) is their current top range
phone SoC and the first supported chip based on Cortex-X4,
Cortex-A720 and Cortex-A520.
- Qualcomm X1E80100 (Snapdragon X Elite) in turn is the latest Laptop
chip using the custom Oryon cores.
- Unisoc UMS9620 (Tanggula 7 series) is a 5G phone SoC based on
Cortex-A76 and Cortex-A55
In terms of boards, we have
- Five old Microsoft Lumia phones, the HTC One Mini 2, Motorola Moto
G 4G, and Huawei Honor 5X/GR5, all based on Snapdragon SoCs.
- Multiple Rockchips mobile gaming systems (Anbernic RG351V, Powkiddy
RK2023, Powkiddy X55) along with the Sonoff iHost Smart Home Hub
and a few Rockchips SBCs
- Some ComXpress boards based on Marvell CN913x, which is the
follow-up to Armada 7xxx/8xxx.
- Six new industrial/embedded boards based on NXP i.MX8 and i.MX9
- Mediatek MT8183 based Chromebooks from Lenovo, Asus and Acer.
- Toradex Verdin AM62 Mallow carrier for TI AM62
- Huashan Pi board based on the SophGo CV1812H RISC-V chip
- Two boards based on Allwinner H616/H618
- A number of reference boards for various added SoCs from Qualcomm,
Mediatek, Google, Samsung, NXP and Spreadtrum
As usual, there are cleanups and warning fixes across all platforms as
well as added features for several of them"
* tag 'soc-dt-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (857 commits)
ARM: dts: usr8200: Fix phy registers
arm64: dts: intel: minor whitespace cleanup around '='
arm64: dts: socfpga: agilex: drop redundant status
arm64: dts: socfpga: agilex: add unit address to soc node
arm64: dts: socfpga: agilex: move firmware out of soc node
arm64: dts: socfpga: agilex: move FPGA region out of soc node
arm64: dts: socfpga: agilex: align pin-controller name with bindings
arm64: dts: socfpga: stratix10_swvp: drop unsupported DW MSHC properties
arm64: dts: socfpga: stratix10_socdk: align NAND chip name with bindings
arm64: dts: socfpga: stratix10: add unit address to soc node
arm64: dts: socfpga: stratix10: move firmware out of soc node
arm64: dts: socfpga: stratix10: move FPGA region out of soc node
arm64: dts: socfpga: stratix10: align pincfg nodes with bindings
arm64: dts: socfpga: stratix10: add clock-names to DWC2 USB
arm64: dts: socfpga: drop unsupported cdns,page-size and cdns,block-size
ARM: dts: socfpga: align NAND controller name with bindings
ARM: dts: socfpga: drop unsupported cdns,page-size and cdns,block-size
arm64: dts: rockchip: Fix led pinctrl of lubancat 1
arm64: dts: rockchip: correct gpio_pwrctrl1 typo on nanopc-t6
arm64: dts: rockchip: correct gpio_pwrctrl1 typo on rock-5b
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most interesting thing is probably the networking structs
reorganization and a significant amount of changes is around
self-tests.
Core & protocols:
- Analyze and reorganize core networking structs (socks, netdev,
netns, mibs) to optimize cacheline consumption and set up build
time warnings to safeguard against future header changes
This improves TCP performances with many concurrent connections up
to 40%
- Add page-pool netlink-based introspection, exposing the memory
usage and recycling stats. This helps indentify bad PP users and
possible leaks
- Refine TCP/DCCP source port selection to no longer favor even
source port at connect() time when IP_LOCAL_PORT_RANGE is set. This
lowers the time taken by connect() for hosts having many active
connections to the same destination
- Refactor the TCP bind conflict code, shrinking related socket
structs
- Refactor TCP SYN-Cookie handling, as a preparation step to allow
arbitrary SYN-Cookie processing via eBPF
- Tune optmem_max for 0-copy usage, increasing the default value to
128KB and namespecifying it
- Allow coalescing for cloned skbs coming from page pools, improving
RX performances with some common configurations
- Reduce extension header parsing overhead at GRO time
- Add bridge MDB bulk deletion support, allowing user-space to
request the deletion of matching entries
- Reorder nftables struct members, to keep data accessed by the
datapath first
- Introduce TC block ports tracking and use. This allows supporting
multicast-like behavior at the TC layer
- Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
classifiers (RSVP and tcindex)
- More data-race annotations
- Extend the diag interface to dump TCP bound-only sockets
- Conditional notification of events for TC qdisc class and actions
- Support for WPAN dynamic associations with nearby devices, to form
a sub-network using a specific PAN ID
- Implement SMCv2.1 virtual ISM device support
- Add support for Batman-avd mulicast packet type
BPF:
- Tons of verifier improvements:
- BPF register bounds logic and range support along with a large
test suite
- log improvements
- complete precision tracking support for register spills
- track aligned STACK_ZERO cases as imprecise spilled registers.
This improves the verifier "instructions processed" metric from
single digit to 50-60% for some programs
- support for user's global BPF subprogram arguments with few
commonly requested annotations for a better developer
experience
- support tracking of BPF_JNE which helps cases when the compiler
transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
like
- several fixes
- Add initial TX metadata implementation for AF_XDP with support in
mlx5 and stmmac drivers. Two types of offloads are supported right
now, that is, TX timestamp and TX checksum offload
- Fix kCFI bugs in BPF all forms of indirect calls from BPF into
kernel and from kernel into BPF work with CFI enabled. This allows
BPF to work with CONFIG_FINEIBT=y
- Change BPF verifier logic to validate global subprograms lazily
instead of unconditionally before the main program, so they can be
guarded using BPF CO-RE techniques
- Support uid/gid options when mounting bpffs
- Add a new kfunc which acquires the associated cgroup of a task
within a specific cgroup v1 hierarchy where the latter is
identified by its id
- Extend verifier to allow bpf_refcount_acquire() of a map value
field obtained via direct load which is a use-case needed in
sched_ext
- Add BPF link_info support for uprobe multi link along with bpftool
integration for the latter
- Support for VLAN tag in XDP hints
- Remove deprecated bpfilter kernel leftovers given the project is
developed in user-space (https://github.com/facebook/bpfilter)
Misc:
- Support for parellel TC self-tests execution
- Increase MPTCP self-tests coverage
- Updated the bridge documentation, including several so-far
undocumented features
- Convert all the net self-tests to run in unique netns, to avoid
random failures due to conflict and allow concurrent runs
- Add TCP-AO self-tests
- Add kunit tests for both cfg80211 and mac80211
- Autogenerate Netlink families documentation from YAML spec
- Add yml-gen support for fixed headers and recursive nests, the tool
can now generate user-space code for all genetlink families for
which we have specs
- A bunch of additional module descriptions fixes
- Catch incorrect freeing of pages belonging to a page pool
Driver API:
- Rust abstractions for network PHY drivers; do not cover yet the
full C API, but already allow implementing functional PHY drivers
in rust
- Introduce queue and NAPI support in the netdev Netlink interface,
allowing complete access to the device <> NAPIs <> queues
relationship
- Introduce notifications filtering for devlink to allow control
application scale to thousands of instances
- Improve PHY validation, requesting rate matching information for
each ethtool link mode supported by both the PHY and host
- Add support for ethtool symmetric-xor RSS hash
- ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
platform
- Expose pin fractional frequency offset value over new DPLL generic
netlink attribute
- Convert older drivers to platform remove callback returning void
- Add support for PHY package MMD read/write
New hardware / drivers:
- Ethernet:
- Octeon CN10K devices
- Broadcom 5760X P7
- Qualcomm SM8550 SoC
- Texas Instrument DP83TG720S PHY
- Bluetooth:
- IMC Networks Bluetooth radio
Removed:
- WiFi:
- libertas 16-bit PCMCIA support
- Atmel at76c50x drivers
- HostAP ISA/PCMCIA style 802.11b driver
- zd1201 802.11b USB dongles
- Orinoco ISA/PCMCIA 802.11b driver
- Aviator/Raytheon driver
- Planet WL3501 driver
- RNDIS USB 802.11b driver
Driver updates:
- Ethernet high-speed NICs:
- Intel (100G, ice, idpf):
- allow one by one port representors creation and removal
- add temperature and clock information reporting
- add get/set for ethtool's header split ringparam
- add again FW logging
- adds support switchdev hardware packet mirroring
- iavf: implement symmetric-xor RSS hash
- igc: add support for concurrent physical and free-running
timers
- i40e: increase the allowable descriptors
- nVidia/Mellanox:
- Preparation for Socket-Direct multi-dev netdev. That will
allow in future releases combining multiple PFs devices
attached to different NUMA nodes under the same netdev
- Broadcom (bnxt):
- TX completion handling improvements
- add basic ntuple filter support
- reduce MSIX vectors usage for MQPRIO offload
- add VXLAN support, USO offload and TX coalesce completion
for P7
- Marvell Octeon EP:
- xmit-more support
- add PF-VF mailbox support and use it for FW notifications
for VFs
- Wangxun (ngbe/txgbe):
- implement ethtool functions to operate pause param, ring
param, coalesce channel number and msglevel
- Netronome/Corigine (nfp):
- add flow-steering support
- support UDP segmentation offload
- Ethernet NICs embedded, slower, virtual:
- Xilinx AXI: remove duplicate DMA code adopting the dma engine
driver
- stmmac: add support for HW-accelerated VLAN stripping
- TI AM654x sw: add mqprio, frame preemption & coalescing
- gve: add support for non-4k page sizes.
- virtio-net: support dynamic coalescing moderation
- nVidia/Mellanox Ethernet datacenter switches:
- allow firmware upgrade without a reboot
- more flexible support for bridge flooding via the compressed
FID flooding mode
- Ethernet embedded switches:
- Microchip:
- fine-tune flow control and speed configurations in KSZ8xxx
- KSZ88X3: enable setting rmii reference
- Renesas:
- add jumbo frames support
- Marvell:
- 88E6xxx: add "eth-mac" and "rmon" stats support
- Ethernet PHYs:
- aquantia: add firmware load support
- at803x: refactor the driver to simplify adding support for more
chip variants
- NXP C45 TJA11xx: Add MACsec offload support
- Wifi:
- MediaTek (mt76):
- NVMEM EEPROM improvements
- mt7996 Extremely High Throughput (EHT) improvements
- mt7996 Wireless Ethernet Dispatcher (WED) support
- mt7996 36-bit DMA support
- Qualcomm (ath12k):
- support for a single MSI vector
- WCN7850: support AP mode
- Intel (iwlwifi):
- new debugfs file fw_dbg_clear
- allow concurrent P2P operation on DFS channels
- Bluetooth:
- QCA2066: support HFP offload
- ISO: more broadcast-related improvements
- NXP: better recovery in case receiver/transmitter get out of sync"
* tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits)
lan78xx: remove redundant statement in lan78xx_get_eee
lan743x: remove redundant statement in lan743x_ethtool_get_eee
bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer()
bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel()
bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter()
tcp: Revert no longer abort SYN_SENT when receiving some ICMP
Revert "mlx5 updates 2023-12-20"
Revert "net: stmmac: Enable Per DMA Channel interrupt"
ipvlan: Remove usage of the deprecated ida_simple_xx() API
ipvlan: Fix a typo in a comment
net/sched: Remove ipt action tests
net: stmmac: Use interrupt mode INTM=1 for per channel irq
net: stmmac: Add support for TX/RX channel interrupt
net: stmmac: Make MSI interrupt routine generic
dt-bindings: net: snps,dwmac: per channel irq
net: phy: at803x: make read_status more generic
net: phy: at803x: add support for cdt cross short test for qca808x
net: phy: at803x: refactor qca808x cable test get status function
net: phy: at803x: generalize cdt fault length function
net: ethernet: cortina: Drop TSO support
...
|
|
A number of options got reorganized over time wihtin Kconfig, so make sure
everything is where it belongs in order to simplify defconfig changes
again in the future.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic cleanups from Arnd Bergmann:
"A series from Baoquan He cleans up the asm-generic/io.h to remove the
ioremap_uc() definition from everything except x86, which still needs
it for pre-PAT systems. This series notably contains a patch from
Jiaxun Yang that converts MIPS to use asm-generic/io.h like every
other architecture does, enabling future cleanups.
Some of my own patches fix -Wmissing-prototype warnings in
architecture specific code across several architectures. This is now
needed as the warning is enabled by default. There are still some
remaining warnings in minor platforms, but the series should catch
most of the widely used ones make them more consistent with one
another.
David McKay fixes a bug in __generic_cmpxchg_local() when this is used
on 64-bit architectures. This could currently only affect parisc64 and
sparc64.
Additional cleanups address from Linus Walleij, Uwe Kleine-König,
Thomas Huth, and Kefeng Wang help reduce unnecessary inconsistencies
between architectures"
* tag 'asm-generic-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic: Fix 32 bit __generic_cmpxchg_local
Hexagon: Make pfn accessors statics inlines
ARC: mm: Make virt_to_pfn() a static inline
mips: remove extraneous asm-generic/iomap.h include
sparc: Use $(kecho) to announce kernel images being ready
arm64: vdso32: Define BUILD_VDSO32_64 to correct prototypes
csky: fix arch_jump_label_transform_static override
arch: add do_page_fault prototypes
arch: add missing prepare_ftrace_return() prototypes
arch: vdso: consolidate gettime prototypes
arch: include linux/cpu.h for trap_init() prototype
arch: fix asm-offsets.c building with -Wmissing-prototypes
arch: consolidate arch_irq_work_raise prototypes
hexagon: Remove CONFIG_HEXAGON_ARCH_VERSION from uapi header
asm/io: remove unnecessary xlate_dev_mem_ptr() and unxlate_dev_mem_ptr()
mips: io: remove duplicated codes
arch/*/io.h: remove ioremap_uc in some architectures
mips: add <asm-generic/io.h> including
|
|
Pull header cleanups from Kent Overstreet:
"The goal is to get sched.h down to a type only header, so the main
thing happening in this patchset is splitting out various _types.h
headers and dependency fixups, as well as moving some things out of
sched.h to better locations.
This is prep work for the memory allocation profiling patchset which
adds new sched.h interdepencencies"
* tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs: (51 commits)
Kill sched.h dependency on rcupdate.h
kill unnecessary thread_info.h include
Kill unnecessary kernel.h include
preempt.h: Kill dependency on list.h
rseq: Split out rseq.h from sched.h
LoongArch: signal.c: add header file to fix build error
restart_block: Trim includes
lockdep: move held_lock to lockdep_types.h
sem: Split out sem_types.h
uidgid: Split out uidgid_types.h
seccomp: Split out seccomp_types.h
refcount: Split out refcount_types.h
uapi/linux/resource.h: fix include
x86/signal: kill dependency on time.h
syscall_user_dispatch.h: split out *_types.h
mm_types_task.h: Trim dependencies
Split out irqflags_types.h
ipc: Kill bogus dependency on spinlock.h
shm: Slim down dependencies
workqueue: Split out workqueue_types.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Add incremental lskcipher/skcipher processing
Algorithms:
- Remove SHA1 from drbg
- Remove CFB and OFB
Drivers:
- Add comp high perf mode configuration in hisilicon/zip
- Add support for 420xx devices in qat
- Add IAA Compression Accelerator driver"
* tag 'v6.8-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (172 commits)
crypto: iaa - Account for cpu-less numa nodes
crypto: scomp - fix req->dst buffer overflow
crypto: sahara - add support for crypto_engine
crypto: sahara - remove error message for bad aes request size
crypto: sahara - remove unnecessary NULL assignments
crypto: sahara - remove 'active' flag from sahara_aes_reqctx struct
crypto: sahara - use dev_err_probe()
crypto: sahara - use devm_clk_get_enabled()
crypto: sahara - use BIT() macro
crypto: sahara - clean up macro indentation
crypto: sahara - do not resize req->src when doing hash operations
crypto: sahara - fix processing hash requests with req->nbytes < sg->length
crypto: sahara - improve error handling in sahara_sha_process()
crypto: sahara - fix wait_for_completion_timeout() error handling
crypto: sahara - fix ahash reqsize
crypto: sahara - handle zero-length aes requests
crypto: skcipher - remove excess kerneldoc members
crypto: shash - remove excess kerneldoc members
crypto: qat - generate dynamically arbiter mappings
crypto: qat - add support for ring pair level telemetry
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull security module updates from Paul Moore:
- Add three new syscalls: lsm_list_modules(), lsm_get_self_attr(), and
lsm_set_self_attr().
The first syscall simply lists the LSMs enabled, while the second and
third get and set the current process' LSM attributes. Yes, these
syscalls may provide similar functionality to what can be found under
/proc or /sys, but they were designed to support multiple,
simultaneaous (stacked) LSMs from the start as opposed to the current
/proc based solutions which were created at a time when only one LSM
was allowed to be active at a given time.
We have spent considerable time discussing ways to extend the
existing /proc interfaces to support multiple, simultaneaous LSMs and
even our best ideas have been far too ugly to support as a kernel
API; after +20 years in the kernel, I felt the LSM layer had
established itself enough to justify a handful of syscalls.
Support amongst the individual LSM developers has been nearly
unanimous, with a single objection coming from Tetsuo (TOMOYO) as he
is worried that the LSM_ID_XXX token concept will make it more
difficult for out-of-tree LSMs to survive. Several members of the LSM
community have demonstrated the ability for out-of-tree LSMs to
continue to exist by picking high/unused LSM_ID values as well as
pointing out that many kernel APIs rely on integer identifiers, e.g.
syscalls (!), but unfortunately Tetsuo's objections remain.
My personal opinion is that while I have no interest in penalizing
out-of-tree LSMs, I'm not going to penalize in-tree development to
support out-of-tree development, and I view this as a necessary step
forward to support the push for expanded LSM stacking and reduce our
reliance on /proc and /sys which has occassionally been problematic
for some container users. Finally, we have included the linux-api
folks on (all?) recent revisions of the patchset and addressed all of
their concerns.
- Add a new security_file_ioctl_compat() LSM hook to handle the 32-bit
ioctls on 64-bit systems problem.
This patch includes support for all of the existing LSMs which
provide ioctl hooks, although it turns out only SELinux actually
cares about the individual ioctls. It is worth noting that while
Casey (Smack) and Tetsuo (TOMOYO) did not give explicit ACKs to this
patch, they did both indicate they are okay with the changes.
- Fix a potential memory leak in the CALIPSO code when IPv6 is disabled
at boot.
While it's good that we are fixing this, I doubt this is something
users are seeing in the wild as you need to both disable IPv6 and
then attempt to configure IPv6 labeled networking via
NetLabel/CALIPSO; that just doesn't make much sense.
Normally this would go through netdev, but Jakub asked me to take
this patch and of all the trees I maintain, the LSM tree seemed like
the best fit.
- Update the LSM MAINTAINERS entry with additional information about
our process docs, patchwork, bug reporting, etc.
I also noticed that the Lockdown LSM is missing a dedicated
MAINTAINERS entry so I've added that to the pull request. I've been
working with one of the major Lockdown authors/contributors to see if
they are willing to step up and assume a Lockdown maintainer role;
hopefully that will happen soon, but in the meantime I'll continue to
look after it.
- Add a handful of mailmap entries for Serge Hallyn and myself.
* tag 'lsm-pr-20240105' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (27 commits)
lsm: new security_file_ioctl_compat() hook
lsm: Add a __counted_by() annotation to lsm_ctx.ctx
calipso: fix memory leak in netlbl_calipso_add_pass()
selftests: remove the LSM_ID_IMA check in lsm/lsm_list_modules_test
MAINTAINERS: add an entry for the lockdown LSM
MAINTAINERS: update the LSM entry
mailmap: add entries for Serge Hallyn's dead accounts
mailmap: update/replace my old email addresses
lsm: mark the lsm_id variables are marked as static
lsm: convert security_setselfattr() to use memdup_user()
lsm: align based on pointer length in lsm_fill_user_ctx()
lsm: consolidate buffer size handling into lsm_fill_user_ctx()
lsm: correct error codes in security_getselfattr()
lsm: cleanup the size counters in security_getselfattr()
lsm: don't yet account for IMA in LSM_CONFIG_COUNT calculation
lsm: drop LSM_ID_IMA
LSM: selftests for Linux Security Module syscalls
SELinux: Add selfattr hooks
AppArmor: Add selfattr hooks
Smack: implement setselfattr and getselfattr hooks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Quite a lot of kexec work this time around. Many singleton patches in
many places. The notable patch series are:
- nilfs2 folio conversion from Matthew Wilcox in 'nilfs2: Folio
conversions for file paths'.
- Additional nilfs2 folio conversion from Ryusuke Konishi in 'nilfs2:
Folio conversions for directory paths'.
- IA64 remnant removal in Heiko Carstens's 'Remove unused code after
IA-64 removal'.
- Arnd Bergmann has enabled the -Wmissing-prototypes warning
everywhere in 'Treewide: enable -Wmissing-prototypes'. This had
some followup fixes:
- Nathan Chancellor has cleaned up the hexagon build in the series
'hexagon: Fix up instances of -Wmissing-prototypes'.
- Nathan also addressed some s390 warnings in 's390: A couple of
fixes for -Wmissing-prototypes'.
- Arnd Bergmann addresses the same warnings for MIPS in his series
'mips: address -Wmissing-prototypes warnings'.
- Baoquan He has made kexec_file operate in a top-down-fitting manner
similar to kexec_load in the series 'kexec_file: Load kernel at top
of system RAM if required'
- Baoquan He has also added the self-explanatory 'kexec_file: print
out debugging message if required'.
- Some checkstack maintenance work from Tiezhu Yang in the series
'Modify some code about checkstack'.
- Douglas Anderson has disentangled the watchdog code's logging when
multiple reports are occurring simultaneously. The series is
'watchdog: Better handling of concurrent lockups'.
- Yuntao Wang has contributed some maintenance work on the crash code
in 'crash: Some cleanups and fixes'"
* tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (157 commits)
crash_core: fix and simplify the logic of crash_exclude_mem_range()
x86/crash: use SZ_1M macro instead of hardcoded value
x86/crash: remove the unused image parameter from prepare_elf_headers()
kdump: remove redundant DEFAULT_CRASH_KERNEL_LOW_SIZE
scripts/decode_stacktrace.sh: strip unexpected CR from lines
watchdog: if panicking and we dumped everything, don't re-enable dumping
watchdog/hardlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/softlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/hardlockup: adopt softlockup logic avoiding double-dumps
kexec_core: fix the assignment to kimage->control_page
x86/kexec: fix incorrect end address passed to kernel_ident_mapping_init()
lib/trace_readwrite.c:: replace asm-generic/io with linux/io
nilfs2: cpfile: fix some kernel-doc warnings
stacktrace: fix kernel-doc typo
scripts/checkstack.pl: fix no space expression between sp and offset
x86/kexec: fix incorrect argument passed to kexec_dprintk()
x86/kexec: use pr_err() instead of kexec_dprintk() when an error occurs
nilfs2: add missing set_freezable() for freezable kthread
kernel: relay: remove relay_file_splice_read dead code, doesn't work
docs: submit-checklist: remove all of "make namespacecheck"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the series
'maple_tree: add mt_free_one() and mt_attr() helpers'
'Some cleanups of maple tree'
- In the series 'mm: use memmap_on_memory semantics for dax/kmem'
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few fixes)
in the patch series
'Add folio_zero_tail() and folio_fill_tail()'
'Make folio_start_writeback return void'
'Fix fault handler's handling of poisoned tail pages'
'Convert aops->error_remove_page to ->error_remove_folio'
'Finish two folio conversions'
'More swap folio conversions'
- Kefeng Wang has also contributed folio-related work in the series
'mm: cleanup and use more folio in page fault'
- Jim Cromie has improved the kmemleak reporting output in the series
'tweak kmemleak report format'.
- In the series 'stackdepot: allow evicting stack traces' Andrey
Konovalov to permits clients (in this case KASAN) to cause eviction
of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series 'mm:
page_alloc: fixes for high atomic reserve caluculations'.
- Dmitry Rokosov has added to the samples/ dorectory some sample code
for a userspace memcg event listener application. See the series
'samples: introduce cgroup events listeners'.
- Some mapletree maintanance work from Liam Howlett in the series
'maple_tree: iterator state changes'.
- Nhat Pham has improved zswap's approach to writeback in the series
'workload-specific and memory pressure-driven zswap writeback'.
- DAMON/DAMOS feature and maintenance work from SeongJae Park in the
series
'mm/damon: let users feed and tame/auto-tune DAMOS'
'selftests/damon: add Python-written DAMON functionality tests'
'mm/damon: misc updates for 6.8'
- Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
memcg: subtree stats flushing and thresholds'.
- In the series 'Multi-size THP for anonymous memory' Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series 'More buffer_head
cleanups'.
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
Add ksm advisor'. This is a governor which tunes KSM's scanning
aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory use
in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.
- Matthew Wilcox has performed some maintenance work on the writeback
code, both code and within filesystems. The series is 'Clean up the
writeback paths'.
- Andrey Konovalov has optimized KASAN's handling of alloc and free
stack traces for secondary-level allocators, in the series 'kasan:
save mempool stack traces'.
- Andrey also performed some KASAN maintenance work in the series
'kasan: assorted clean-ups'.
- David Hildenbrand has gone to town on the rmap code. Cleanups, more
pte batching, folio conversions and more. See the series 'mm/rmap:
interface overhaul'.
- Kinsey Ho has contributed some maintenance work on the MGLRU code
in the series 'mm/mglru: Kconfig cleanup'.
- Matthew Wilcox has contributed lruvec page accounting code cleanups
in the series 'Remove some lruvec page accounting functions'"
* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
mm, treewide: introduce NR_PAGE_ORDERS
selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
selftests/mm: skip test if application doesn't has root privileges
selftests/mm: conform test to TAP format output
selftests: mm: hugepage-mmap: conform to TAP format output
selftests/mm: gup_test: conform test to TAP format output
mm/selftests: hugepage-mremap: conform test to TAP format output
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
mm/memcontrol: remove __mod_lruvec_page_state()
mm/khugepaged: use a folio more in collapse_file()
slub: use a folio in __kmalloc_large_node
slub: use folio APIs in free_large_kmalloc()
slub: use alloc_pages_node() in alloc_slab_page()
mm: remove inc/dec lruvec page state functions
mm: ratelimit stat flush from workingset shrinker
kasan: stop leaking stack trace handles
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
mm/mglru: add dummy pmd_dirty()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- SLUB: delayed freezing of CPU partial slabs (Chengming Zhou)
Freezing is an operation involving double_cmpxchg() that makes a slab
exclusive for a particular CPU. Chengming noticed that we use it also
in situations where we are not yet installing the slab as the CPU
slab, because freezing also indicates that the slab is not on the
shared list. This results in redundant freeze/unfreeze operation and
can be avoided by marking separately the shared list presence by
reusing the PG_workingset flag.
This approach neatly avoids the issues described in 9b1ea29bc0d7
("Revert "mm, slub: consider rest of partial list if acquire_slab()
fails"") as we can now grab a slab from the shared list in a quick
and guaranteed way without the cmpxchg_double() operation that
amplifies the lock contention and can fail.
As a result, lkp has reported 34.2% improvement of
stress-ng.rawudp.ops_per_sec
- SLAB removal and SLUB cleanups (Vlastimil Babka)
The SLAB allocator has been deprecated since 6.5 and nobody has
objected so far. We agreed at LSF/MM to wait until the next LTS,
which is 6.6, so we should be good to go now.
This doesn't yet erase all traces of SLAB outside of mm/ so some dead
code, comments or documentation remain, and will be cleaned up
gradually (some series are already in the works).
Removing the choice of allocators has already allowed to simplify and
optimize the code wiring up the kmalloc APIs to the SLUB
implementation.
* tag 'slab-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (34 commits)
mm/slub: free KFENCE objects in slab_free_hook()
mm/slub: handle bulk and single object freeing separately
mm/slub: introduce __kmem_cache_free_bulk() without free hooks
mm/slub: fix bulk alloc and free stats
mm/slub: optimize free fast path code layout
mm/slub: optimize alloc fastpath code layout
mm/slub: remove slab_alloc() and __kmem_cache_alloc_lru() wrappers
mm/slab: move kmalloc() functions from slab_common.c to slub.c
mm/slab: move kmalloc_slab() to mm/slab.h
mm/slab: move kfree() from slab_common.c to slub.c
mm/slab: move struct kmem_cache_node from slab.h to slub.c
mm/slab: move memcg related functions from slab.h to slub.c
mm/slab: move pre/post-alloc hooks from slab.h to slub.c
mm/slab: consolidate includes in the internal mm/slab.h
mm/slab: move the rest of slub_def.h to mm/slab.h
mm/slab: move struct kmem_cache_cpu declaration to slub.c
mm/slab: remove mm/slab.c and slab_def.h
mm/mempool/dmapool: remove CONFIG_DEBUG_SLAB ifdefs
mm/slab: remove CONFIG_SLAB code from slab common code
cpu/hotplug: remove CPUHP_SLAB_PREPARE hooks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Energy scheduling:
- Consolidate how the max compute capacity is used in the scheduler
and how we calculate the frequency for a level of utilization.
- Rework interface between the scheduler and the schedutil governor
- Simplify the util_est logic
Deadline scheduler:
- Work more towards reducing SCHED_DEADLINE starvation of low
priority tasks (e.g., SCHED_OTHER) tasks when higher priority tasks
monopolize CPU cycles, via the introduction of 'deadline servers'
(nested/2-level scheduling).
"Fair servers" to make use of this facility are not introduced yet.
EEVDF:
- Introduce O(1) fastpath for EEVDF task selection
NUMA balancing:
- Tune the NUMA-balancing vma scanning logic some more, to better
distribute the probability of a particular vma getting scanned.
Plus misc fixes, cleanups and updates"
* tag 'sched-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
sched/fair: Fix tg->load when offlining a CPU
sched/fair: Remove unused 'next_buddy_marked' local variable in check_preempt_wakeup_fair()
sched/fair: Use all little CPUs for CPU-bound workloads
sched/fair: Simplify util_est
sched/fair: Remove SCHED_FEAT(UTIL_EST_FASTUP, true)
arm64/amu: Use capacity_ref_freq() to set AMU ratio
cpufreq/cppc: Set the frequency used for computing the capacity
cpufreq/cppc: Move and rename cppc_cpufreq_{perf_to_khz|khz_to_perf}()
energy_model: Use a fixed reference frequency
cpufreq/schedutil: Use a fixed reference frequency
cpufreq: Use the fixed and coherent frequency for scaling capacity
sched/topology: Add a new arch_scale_freq_ref() method
freezer,sched: Clean saved_state when restoring it during thaw
sched/fair: Update min_vruntime for reweight_entity() correctly
sched/doc: Update documentation after renames and synchronize Chinese version
sched/cpufreq: Rework iowait boost
sched/cpufreq: Rework schedutil governor performance estimation
sched/pelt: Avoid underestimation of task utilization
sched/timers: Explain why idle task schedules out on remote timer enqueue
sched/cpuidle: Comment about timers requirements VS idle handler
...
|
|
Commit d8b0f5465012 ("wire up syscalls for statmount/listmount") added
two new system calls to arch/arm64/include/asm/unistd32.h but forgot to
update the __NR_compat_syscalls number, thus causing the following build
failures:
arch/arm64/include/asm/unistd32.h:922:24: error: array index in initializer exceeds array bounds
922 | #define __NR_statmount 457
| ^~~
arch/arm64/kernel/sys32.c:130:34: note: in definition of macro '__SYSCALL'
130 | #define __SYSCALL(nr, sym) [nr] = __arm64_##sym,
| ^~
Bump up the number by two to accomodate for the new system calls added.
Fixes: d8b0f5465012 ("wire up syscalls for statmount/listmount")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"CPU features:
- Remove ARM64_HAS_NO_HW_PREFETCH copy_page() optimisation for ye
olde Thunder-X machines
- Avoid mapping KPTI trampoline when it is not required
- Make CPU capability API more robust during early initialisation
Early idreg overrides:
- Remove dependencies on core kernel helpers from the early
command-line parsing logic in preparation for moving this code
before the kernel is mapped
FPsimd:
- Restore kernel-mode fpsimd context lazily, allowing us to run
fpsimd code sequences in the kernel with pre-emption enabled
KBuild:
- Install 'vmlinuz.efi' when CONFIG_EFI_ZBOOT=y
- Makefile cleanups
LPA2 prep:
- Preparatory work for enabling the 'LPA2' extension, which will
introduce 52-bit virtual and physical addressing even with 4KiB
pages (including for KVM guests).
Misc:
- Remove dead code and fix a typo
MM:
- Pass NUMA node information for IRQ stack allocations
Perf:
- Add perf support for the Synopsys DesignWare PCIe PMU
- Add support for event counting thresholds (FEAT_PMUv3_TH)
introduced in Armv8.8
- Add support for i.MX8DXL SoCs to the IMX DDR PMU driver.
- Minor PMU driver fixes and optimisations
RIP VPIPT:
- Remove what support we had for the obsolete VPIPT I-cache policy
Selftests:
- Improvements to the SVE and SME selftests
Stacktrace:
- Refactor kernel unwind logic so that it can used by BPF unwinding
and, eventually, reliable backtracing
Sysregs:
- Update a bunch of register definitions based on the latest XML drop
from Arm"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (87 commits)
kselftest/arm64: Don't probe the current VL for unsupported vector types
efi/libstub: zboot: do not use $(shell ...) in cmd_copy_and_pad
arm64: properly install vmlinuz.efi
arm64/sysreg: Add missing system instruction definitions for FGT
arm64/sysreg: Add missing system register definitions for FGT
arm64/sysreg: Add missing ExtTrcBuff field definition to ID_AA64DFR0_EL1
arm64/sysreg: Add missing Pauth_LR field definitions to ID_AA64ISAR1_EL1
arm64: memory: remove duplicated include
arm: perf: Fix ARCH=arm build with GCC
arm64: Align boot cpucap handling with system cpucap handling
arm64: Cleanup system cpucap handling
MAINTAINERS: add maintainers for DesignWare PCIe PMU driver
drivers/perf: add DesignWare PCIe PMU driver
PCI: Move pci_clear_and_set_dword() helper to PCI header
PCI: Add Alibaba Vendor ID to linux/pci_ids.h
docs: perf: Add description for Synopsys DesignWare PCIe PMU driver
arm64: irq: set the correct node for shadow call stack
Revert "perf/arm_dmc620: Remove duplicate format attribute #defines"
arm64: fpsimd: Implement lazy restore for kernel mode FPSIMD
arm64: fpsimd: Preserve/restore kernel mode NEON at context switch
...
|
|
commit 23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely") has
changed the definition of MAX_ORDER to be inclusive. This has caused
issues with code that was not yet upstream and depended on the previous
definition.
To draw attention to the altered meaning of the define, rename MAX_ORDER
to MAX_PAGE_ORDER.
Link: https://lkml.kernel.org/r/20231228144704.14033-2-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
NR_PAGE_ORDERS defines the number of page orders supported by the page
allocator, ranging from 0 to MAX_ORDER, MAX_ORDER + 1 in total.
NR_PAGE_ORDERS assists in defining arrays of page orders and allows for
more natural iteration over them.
[kirill.shutemov@linux.intel.com: fixup for kerneldoc warning]
Link: https://lkml.kernel.org/r/20240101111512.7empzyifq7kxtzk3@box
Link: https://lkml.kernel.org/r/20231228144704.14033-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
"This contains the work to retrieve detailed information about mounts
via two new system calls. This is hopefully the beginning of the end
of the saga that started with fsinfo() years ago.
The LWN articles in [1] and [2] can serve as a summary so we can avoid
rehashing everything here.
At LSFMM in May 2022 we got into a room and agreed on what we want to
do about fsinfo(). Basically, split it into pieces. This is the first
part of that agreement. Specifically, it is concerned with retrieving
information about mounts. So this only concerns the mount information
retrieval, not the mount table change notification, or the extended
filesystem specific mount option work. That is separate work.
Currently mounts have a 32bit id. Mount ids are already in heavy use
by libmount and other low-level userspace but they can't be relied
upon because they're recycled very quickly. We agreed that mounts
should carry a unique 64bit id by which they can be referenced
directly. This is now implemented as part of this work.
The new 64bit mount id is exposed in statx() through the new
STATX_MNT_ID_UNIQUE flag. If the flag isn't raised the old mount id is
returned. If it is raised and the kernel supports the new 64bit mount
id the flag is raised in the result mask and the new 64bit mount id is
returned. New and old mount ids do not overlap so they cannot be
conflated.
Two new system calls are introduced that operate on the 64bit mount
id: statmount() and listmount(). A summary of the api and usage can be
found on LWN as well (cf. [3]) but of course, I'll provide a summary
here as well.
Both system calls rely on struct mnt_id_req. Which is the request
struct used to pass the 64bit mount id identifying the mount to
operate on. It is extensible to allow for the addition of new
parameters and for future use in other apis that make use of mount
ids.
statmount() mimicks the semantics of statx() and exposes a set flags
that userspace may raise in mnt_id_req to request specific information
to be retrieved. A statmount() call returns a struct statmount filled
in with information about the requested mount. Supported requests are
indicated by raising the request flag passed in struct mnt_id_req in
the @mask argument in struct statmount.
Currently we do support:
- STATMOUNT_SB_BASIC:
Basic filesystem info
- STATMOUNT_MNT_BASIC
Mount information (mount id, parent mount id, mount attributes etc)
- STATMOUNT_PROPAGATE_FROM
Propagation from what mount in current namespace
- STATMOUNT_MNT_ROOT
Path of the root of the mount (e.g., mount --bind /bla /mnt returns /bla)
- STATMOUNT_MNT_POINT
Path of the mount point (e.g., mount --bind /bla /mnt returns /mnt)
- STATMOUNT_FS_TYPE
Name of the filesystem type as the magic number isn't enough due to submounts
The string options STATMOUNT_MNT_{ROOT,POINT} and STATMOUNT_FS_TYPE
are appended to the end of the struct. Userspace can use the offsets
in @fs_type, @mnt_root, and @mnt_point to reference those strings
easily.
The struct statmount reserves quite a bit of space currently for
future extensibility. This isn't really a problem and if this bothers
us we can just send a follow-up pull request during this cycle.
listmount() is given a 64bit mount id via mnt_id_req just as
statmount(). It takes a buffer and a size to return an array of the
64bit ids of the child mounts of the requested mount. Userspace can
thus choose to either retrieve child mounts for a mount in batches or
iterate through the child mounts. For most use-cases it will be
sufficient to just leave space for a few child mounts. But for big
mount tables having an iterator is really helpful. Iterating through a
mount table works by setting @param in mnt_id_req to the mount id of
the last child mount retrieved in the previous listmount() call"
Link: https://lwn.net/Articles/934469 [1]
Link: https://lwn.net/Articles/829212 [2]
Link: https://lwn.net/Articles/950569 [3]
* tag 'vfs-6.8.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
add selftest for statmount/listmount
fs: keep struct mnt_id_req extensible
wire up syscalls for statmount/listmount
add listmount(2) syscall
statmount: simplify string option retrieval
statmount: simplify numeric option retrieval
add statmount(2) syscall
namespace: extract show_path() helper
mounts: keep list of mounts in an rbtree
add unique mount ID
|
|
Common KVM changes for 6.8:
- Use memdup_array_user() to harden against overflow.
- Unconditionally advertise KVM_CAP_DEVICE_CTRL for all architectures.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 6.8
- LPA2 support, adding 52bit IPA/PA capability for 4kB and 16kB
base granule sizes. Branch shared with the arm64 tree.
- Large Fine-Grained Trap rework, bringing some sanity to the
feature, although there is more to come. This comes with
a prefix branch shared with the arm64 tree.
- Some additional Nested Virtualization groundwork, mostly
introducing the NV2 VNCR support and retargetting the NV
support to that version of the architecture.
- A small set of vgic fixes and associated cleanups.
|
|
CONFIG_HAVE_KVM is currently used by some architectures to either
enabled the KVM config proper, or to enable host-side code that is
not part of the KVM module. However, CONFIG_KVM's "select" statement
in virt/kvm/Kconfig corresponds to a third meaning, namely to
enable common Kconfigs required by all architectures that support
KVM.
These three meanings can be replaced respectively by an
architecture-specific Kconfig, by IS_ENABLED(CONFIG_KVM), or by
a new Kconfig symbol that is in turn selected by the
architecture-specific "config KVM".
Start by introducing such a new Kconfig symbol, CONFIG_KVM_COMMON.
Unlike CONFIG_HAVE_KVM, it is selected by CONFIG_KVM, not by
architecture code, and it brings in all dependencies of common
KVM code. In particular, INTERVAL_TREE was missing in loongarch
and riscv, so that is another thing that is fixed.
Fixes: 8132d887a702 ("KVM: remove CONFIG_HAVE_KVM_EVENTFD", 2023-12-08)
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/all/44907c6b-c5bd-4e4a-a921-e4d3825539d8@infradead.org/
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
for the v6.8 merge window
This fix didn't make it upstream in time, pick it up
for the v6.8 merge window.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc mm fixes from Andrew Morton:
"12 hotfixes.
Two are cc:stable and the remainder either address post-6.7 issues or
aren't considered necessary for earlier kernel versions"
* tag 'mm-hotfixes-stable-2024-01-05-11-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: shrinker: use kvzalloc_node() from expand_one_shrinker_info()
mailmap: add entries for Mathieu Othacehe
MAINTAINERS: change vmware.com addresses to broadcom.com
arch/mm/fault: fix major fault accounting when retrying under per-VMA lock
mm/mglru: skip special VMAs in lru_gen_look_around()
MAINTAINERS: hand over hwpoison maintainership to Miaohe Lin
MAINTAINERS: remove hugetlb maintainer Mike Kravetz
mm: fix unmap_mapping_range high bits shift bug
mm: memcg: fix split queue list crash when large folio migration
mm: fix arithmetic for max_prop_frac when setting max_ratio
mm: fix arithmetic for bdi min_ratio
mm: align larger anonymous mappings on THP boundaries
|
|
Patch series "mm/mglru: Kconfig cleanup", v4.
This series is the result of the following discussion:
https://lore.kernel.org/47066176-bd93-55dd-c2fa-002299d9e034@linux.ibm.com/
It mainly avoids building the code that walks page tables on CPUs that
use it, i.e., those don't support hardware accessed bit. Specifically,
it introduces a new Kconfig to guard some of functions added by
commit bd74fdaea146 ("mm: multi-gen LRU: support page table walks")
on CPUs like POWER9, on which the series was tested.
This patch (of 5):
Some architectures are able to set the accessed bit in PTEs when PTEs
are used as part of linear address translations.
Add CONFIG_ARCH_HAS_HW_PTE_YOUNG for such architectures to be able to
override arch_has_hw_pte_young().
Link: https://lkml.kernel.org/r/20231227141205.2200125-1-kinseyho@google.com
Link: https://lkml.kernel.org/r/20231227141205.2200125-2-kinseyho@google.com
Signed-off-by: Kinsey Ho <kinseyho@google.com>
Co-developed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Tested-by: Donet Tom <donettom@linux.vnet.ibm.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt
SoCFPGA DTS updates for v6.8
- Fix dtbs_check warnings for nand, usb, FPGA firmware, and pin-controller
- Clean up of DTS for Agilex5
* tag 'socfpga_dts_updates_for_v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: intel: minor whitespace cleanup around '='
arm64: dts: socfpga: agilex: drop redundant status
arm64: dts: socfpga: agilex: add unit address to soc node
arm64: dts: socfpga: agilex: move firmware out of soc node
arm64: dts: socfpga: agilex: move FPGA region out of soc node
arm64: dts: socfpga: agilex: align pin-controller name with bindings
arm64: dts: socfpga: stratix10_swvp: drop unsupported DW MSHC properties
arm64: dts: socfpga: stratix10_socdk: align NAND chip name with bindings
arm64: dts: socfpga: stratix10: add unit address to soc node
arm64: dts: socfpga: stratix10: move firmware out of soc node
arm64: dts: socfpga: stratix10: move FPGA region out of soc node
arm64: dts: socfpga: stratix10: align pincfg nodes with bindings
arm64: dts: socfpga: stratix10: add clock-names to DWC2 USB
arm64: dts: socfpga: drop unsupported cdns,page-size and cdns,block-size
ARM: dts: socfpga: align NAND controller name with bindings
ARM: dts: socfpga: drop unsupported cdns,page-size and cdns,block-size
Link: https://lore.kernel.org/r/20240104001354.152410-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
e009b2efb7a8 ("bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters()")
0f2b21477988 ("bnxt_en: Fix compile error without CONFIG_RFS_ACCEL")
https://lore.kernel.org/all/20240105115509.225aa8a2@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In commit f320bc742bc23 ("KVM: arm64: Prepare the creation of s1
mappings at EL2"), pKVM switches from a temporary host-provided
page-table to its own page-table at EL2. Since there is only a single
TTBR for the nVHE hypervisor, this involves disabling and re-enabling
the MMU in __pkvm_init_switch_pgd().
Unfortunately, the memory barriers here are not quite correct.
Specifically:
- A DSB is required to complete the TLB invalidation executed while
the MMU is disabled.
- An ISB is required to make the new TTBR value visible to the
page-table walker before the MMU is enabled in the SCTLR.
An earlier version of the patch actually got this correct:
https://lore.kernel.org/lkml/20210304184717.GB21795@willie-the-truck/
but thanks to some badly worded review comments from yours truly, these
were dropped for the version that was eventually merged.
Bring back the barriers and fix the potential issue (but note that this
was found by code inspection).
Cc: Quentin Perret <qperret@google.com>
Fixes: f320bc742bc23 ("KVM: arm64: Prepare the creation of s1 mappings at EL2")
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240104164220.7968-1-will@kernel.org
|
|
* kvm-arm64/vgic-6.8:
: .
: Fix for the GICv4.1 vSGI pending state being set/cleared from
: userspace, and some cleanup to the MMIO and userspace accessors
: for the pending state.
:
: Also a fix for a potential UAF in the ITS translation cache.
: .
KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache
KVM: arm64: vgic-v3: Reinterpret user ISPENDR writes as I{C,S}PENDR
KVM: arm64: vgic: Use common accessor for writes to ICPENDR
KVM: arm64: vgic: Use common accessor for writes to ISPENDR
KVM: arm64: vgic-v4: Restore pending state on host userspace write
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
There is a potential UAF scenario in the case of an LPI translation
cache hit racing with an operation that invalidates the cache, such
as a DISCARD ITS command. The root of the problem is that
vgic_its_check_cache() does not elevate the refcount on the vgic_irq
before dropping the lock that serializes refcount changes.
Have vgic_its_check_cache() raise the refcount on the returned vgic_irq
and add the corresponding decrement after queueing the interrupt.
Cc: stable@vger.kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240104183233.3560639-1-oliver.upton@linux.dev
|
