| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- change resctrl test to cleanup resctrl_val() and generalize it by
removing test name specific handling from the function.
- several clang build failure fixes to framework and tests
- add tests to verify IFS (In Field Scan) driver functionality
- cleanups to remove unused variables and document changes
* tag 'linux_kselftest-next-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (33 commits)
selftests: ifs: verify IFS ARRAY BIST functionality
selftests: ifs: verify IFS scan test functionality
selftests: ifs: verify test image loading functionality
selftests: ifs: verify test interfaces are created by the driver
selftests/dma:remove unused variable
selftests/breakpoints:Remove unused variable
selftests/x86: fix printk warnings reported by clang
selftests/x86: remove (or use) unused variables and functions
selftests/x86: avoid -no-pie warnings from clang during compilation
selftests/x86: build sysret_rip.c with clang
selftests/x86: build fsgsbase_restore.c with clang
selftests: x86: test_FISTTP: use fisttps instead of ambiguous fisttp
selftests/x86: fix Makefile dependencies to work with clang
selftests/timers: remove unused irqcount variable
selftests: Add information about TAP conformance in tests
selftests/resctrl: Remove test name comparing from write_bm_pid_to_resctrl()
selftests/resctrl: Remove mongrp from CMT test
selftests/resctrl: Remove mongrp from MBA test
selftests/resctrl: Convert ctrlgrp & mongrp to pointers
selftests/resctrl: Make some strings passed to resctrlfs functions const
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
- add vm_mmap() allocation resource manager
- convert usercopy kselftest to KUnit
- disable usercopy testing on !CONFIG_MMU
- add MODULE_DESCRIPTION() to core, list, and usercopy tests
- add tests for assertion formatting functions - assert.c
- introduce KUNIT_ASSERT_MEMEQ and KUNIT_ASSERT_MEMNEQ macros
- fix KUNIT_ASSERT_STRNEQ comments to make it clear that it is an
assertion
- rename KUNIT_ASSERT_FAILURE to KUNIT_FAIL_AND_ABORT
* tag 'linux_kselftest-kunit-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Introduce KUNIT_ASSERT_MEMEQ and KUNIT_ASSERT_MEMNEQ macros
kunit: Rename KUNIT_ASSERT_FAILURE to KUNIT_FAIL_AND_ABORT for readability
kunit: Fix the comment of KUNIT_ASSERT_STRNEQ as assertion
kunit: executor: Simplify string allocation handling
kunit/usercopy: Add missing MODULE_DESCRIPTION()
kunit/usercopy: Disable testing on !CONFIG_MMU
usercopy: Convert test_user_copy to KUnit test
kunit: test: Add vm_mmap() allocation resource manager
list: test: add the missing MODULE_DESCRIPTION() macro
kunit: add missing MODULE_DESCRIPTION() macros to core modules
list: test: remove unused struct 'klist_test_struct'
kunit: Cover 'assert.c' with tests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Update Daniel Bristot de Oliveira's entry in MAINTAINERS,
and credit him in CREDITS
- Harmonize the lock-yielding behavior on dynamically selected
preemption models with static ones
- Reorganize the code a bit: split out sched/syscalls.c to reduce
the size of sched/core.c
- Micro-optimize psi_group_change()
- Fix set_load_weight() for SCHED_IDLE tasks
- Misc cleanups & fixes
* tag 'sched-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Update MAINTAINERS and CREDITS
sched/fair: set_load_weight() must also call reweight_task() for SCHED_IDLE tasks
sched/psi: Optimise psi_group_change a bit
sched/core: Drop spinlocks on contention iff kernel is preemptible
sched/core: Move preempt_model_*() helpers from sched.h to preempt.h
sched/balance: Skip unnecessary updates to idle load balancer's flags
idle: Remove stale RCU comment
sched/headers: Move struct pre-declarations to the beginning of the header
sched/core: Clean up kernel/sched/sched.h a bit
sched/core: Simplify prefetch_curr_exec_start()
sched: Fix spelling in comments
sched/syscalls: Split out kernel/sched/syscalls.c from kernel/sched/core.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add a new cpufreq driver for Loongson-3, add support for new
features in the intel_pstate (Lunar Lake and Arrow Lake platforms, OOB
mode for Emerald Rapids, highest performance change interrupt),
amd-pstate (fast CPPC) and sun50i (Allwinner H700 speed bin) cpufreq
drivers, simplify the cpufreq driver interface, simplify the teo
cpuidle governor, adjust the pm-graph utility for a new version of
Python, address issues and clean up code.
Specifics:
- Add Loongson-3 CPUFreq driver support (Huacai Chen)
- Add support for the Arrow Lake and Lunar Lake platforms and the
out-of-band (OOB) mode on Emerald Rapids to the intel_pstate
cpufreq driver, make it support the highest performance change
interrupt and clean it up (Srinivas Pandruvada)
- Switch cpufreq to new Intel CPU model defines (Tony Luck)
- Simplify the cpufreq driver interface by switching the .exit()
driver callback to the void return data type (Lizhe, Viresh Kumar)
- Make cpufreq_boost_enabled() return bool (Dhruva Gole)
- Add fast CPPC support to the amd-pstate cpufreq driver, address
multiple assorted issues in it and clean it up (Perry Yuan, Mario
Limonciello, Dhananjay Ugwekar, Meng Li, Xiaojian Du)
- Add Allwinner H700 speed bin to the sun50i cpufreq driver (Ryan
Walklin)
- Fix memory leaks and of_node_put() usage in the sun50i and
qcom-nvmem cpufreq drivers (Javier Carrasco)
- Clean up the sti and dt-platdev cpufreq drivers (Jeff Johnson,
Raphael Gallais-Pou)
- Fix deferred probe handling in the TI cpufreq driver and wrong
return values of ti_opp_supply_probe(), and add OPP tables for the
AM62Ax and AM62Px SoCs to it (Bryan Brattlof, Primoz Fiser)
- Avoid overflow of target_freq in .fast_switch() in the SCMI cpufreq
driver (Jagadeesh Kona)
- Use dev_err_probe() in every error path in probe in the Mediatek
cpufreq driver (Nícolas Prado)
- Fix kernel-doc param for longhaul_setstate in the longhaul cpufreq
driver (Yang Li)
- Fix system resume handling in the CPPC cpufreq driver (Riwen Lu)
- Improve the teo cpuidle governor and clean up leftover comments
from the menu cpuidle governor (Christian Loehle)
- Clean up a comment typo in the teo cpuidle governor (Atul Kumar
Pant)
- Add missing MODULE_DESCRIPTION() macro to cpuidle haltpoll (Jeff
Johnson)
- Switch the intel_idle driver to new Intel CPU model defines (Tony
Luck)
- Switch the Intel RAPL driver new Intel CPU model defines (Tony
Luck)
- Simplify if condition in the idle_inject driver (Thorsten Blum)
- Fix missing cleanup on error in _opp_attach_genpd() (Viresh Kumar)
- Introduce an OF helper function to inform if required-opps is used
and drop a redundant in-parameter to _set_opp_level() (Ulf Hansson)
- Update pm-graph to v5.12 which includes fixes and major code revamp
for python3.12 (Todd Brandt)
- Address several assorted issues in the cpupower utility (Roman
Storozhenko)"
* tag 'pm-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (77 commits)
cpufreq: sti: fix build warning
cpufreq: mediatek: Use dev_err_probe in every error path in probe
cpufreq: Add Loongson-3 CPUFreq driver support
cpufreq: Make cpufreq_driver->exit() return void
cpufreq/amd-pstate: Fix the scaling_max_freq setting on shared memory CPPC systems
cpufreq/amd-pstate-ut: Convert nominal_freq to khz during comparisons
cpufreq: pcc: Remove empty exit() callback
cpufreq: loongson2: Remove empty exit() callback
cpufreq: nforce2: Remove empty exit() callback
cpupower: fix lib default installation path
cpufreq: docs: Add missing scaling_available_frequencies description
cpuidle: teo: Don't count non-existent intercepts
cpupower: Disable direct build of the 'bench' subproject
cpuidle: teo: Remove recent intercepts metric
Revert: "cpuidle: teo: Introduce util-awareness"
cpufreq: make cpufreq_boost_enabled() return bool
cpufreq: intel_pstate: Support highest performance change interrupt
x86/cpufeatures: Add HWP highest perf change feature flag
Documentation: cpufreq: amd-pstate: update doc for Per CPU boost control method
cpufreq: amd-pstate: Cap the CPPC.max_perf to nominal_perf if CPB is off
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add some new hardware support (notably, the Lunar Lake platform
support in int340x and X1E80100 temperature sensor), continue to
rework the thermal driver interface to eliminate trip point IDs from
it, update DT bindings for a number of platforms and simplify probe in
a number of thermal drivers, address issues and clean up code.
Specifics:
- Add DLVR and MSI interrupt support for the Lunar Lake platform to
the int340x thermal driver (Srinivas Pandruvada)
- Enable workload type hints (WLT) support and power floor interrupt
support for the Lunar Lake platform in int340x ((Srinivas
Pandruvada)
- Switch Intel thermal drivers to new Intel CPU model defines (Tony
Luck)
- Clean up the int3400 and int3403 drivers (Erick Archer and David
Alan Gilbert)
- Improve intel_pch_thermal kernel log messages printed during
suspend to idle (Zhang Rui)
- Make the intel_tcc_cooling driver use a model-specific bitmask for
TCC offset (Ricardo Neri)
- Redesign the .set_trip_temp() thermal zone callback to take a trip
pointer instead of a trip ID and update its users (Rafael Wysocki)
- Avoid using invalid combinations of polling_delay and passive_delay
thermal zone parameters (Rafael Wysocki)
- Update a cooling device registration function to take a const
argument (Krzysztof Kozlowski)
- Make the uniphier thermal driver use thermal_zone_for_each_trip()
for walking trip points (Rafael Wysocki)
- Fix and clean up several minor shortcomings in thermal debug
(Rafael Wysocki)
- Rename __thermal_zone_set_trips() to thermal_zone_set_trips() and
make it use trip thresholds (Rafael Wysocki)
- Use READ_ONCE() for lockless access to trip temperature and
hysteresis (Rafael Wysocki)
- Drop unnecessary cooling device target state checks from the
Bang-Bang thermal governor (Rafael Wysocki)
- Avoid invoking thermal governor .trip_crossed() callback for
critical and hot trip points (Rafael Wysocki)
- Group all Renesas drivers inside a dedicated sub directory and add
the missing dependency to OF (Niklas Söderlund)
- Add suspend/resume support on k3_j72xx_bandgap and take the
opportunity to remove an unneeded delay in the init time code path
(Théo Lebrun)
- Fix thermal zone definition for MT8186 and MT8188 (Julien Panis)
- Convert hisilicon-thermal.txt to dt-schema (Abdulrasaq Lawani)
- Add DT bindings for the X1E80100 temperature sensor (Abel Vesa)
- Fix the thermal zone node name regular expression in the DT schema
(Krzysztof Kozlowski)
- Avoid failing thermal control initialization by using default
values on some platforms where calibration data is missing (Chen-Yu
Tsai)
- Fix the sensor cell size in DT for the Exynos platform (Krzysztof
Kozlowski)
- Bring the common definition of '#thermal-sensor-cells' property in
order to simplify the bindings on all the platforms where this
change makes sense and do some minor cleanups (Krzysztof Kozlowski)
- Fix a race between removal and clock disable in the broadcom
thermal driver (Krzysztof Kozlowski)
- Drop 'trips' DT node as required from the thermal zone bindings in
order to fix the remaining warnings appearing for thermal zones
without trip points (Rob Herring)
- Simplify all the drivers where dev_err_probe() can apply (Krzysztof
Kozlowski)
- Clean up code related to stih416 as this platform is not described
anywhere (Raphael Gallais-Pou)"
* tag 'thermal-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (81 commits)
thermal/drivers/sti: Cleanup code related to stih416
thermal/drivers/generic-adc: Simplify with dev_err_probe()
thermal/drivers/generic-adc: Simplify probe() with local dev variable
thermal/drivers/qcom-tsens: Simplify with dev_err_probe()
thermal/drivers/qcom-spmi-adc-tm5: Simplify with dev_err_probe()
thermal/drivers/imx: Simplify with dev_err_probe()
thermal/drivers/imx: Simplify probe() with local dev variable
thermal/drivers/hisi: Simplify with dev_err_probe()
thermal/drivers/exynos: Simplify with dev_err_probe()
thermal/drivers/exynos: Simplify probe() with local dev variable
thermal/drivers/broadcom: Simplify with dev_err_probe()
thermal/drivers/broadcom: Simplify probe() with local dev variable
thermal/drivers/broadcom: Fix race between removal and clock disable
dt-bindings: thermal: Drop 'trips' node as required
dt-bindings: thermal: qoriq: reference thermal-sensor schema
dt-bindings: thermal: cleanup examples indentation
dt-bindings: thermal: simplify few bindings
dt-bindings: thermal: ti,j72xx: reference thermal-sensor schema
dt-bindings: thermal: ti,am654: reference thermal-sensor schema
dt-bindings: thermal: st,stm32: reference thermal-sensor schema
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
- Use value of kernel.randomize_va_space once per exec (Alexey
Dobriyan)
- Honor PT_LOAD alignment for static PIE
- Make bprm->argmin only visible under CONFIG_MMU
- Add KUnit testing of bprm_stack_limits()
* tag 'execve-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
exec: Avoid pathological argc, envc, and bprm->p values
execve: Keep bprm->argmin behind CONFIG_MMU
ELF: fix kernel.randomize_va_space double read
exec: Add KUnit test for bprm_stack_limits()
binfmt_elf: Honor PT_LOAD alignment for static PIE
binfmt_elf: Calculate total_size earlier
selftests/exec: Build both static and non-static load_address tests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull arm SoC platform updates from Arnd Bergmann:
"The majority of the updates here are Dmitry Torokhov's cleanups for
platform code in the pxa and tegra platforms, changing custom
platform_data structures into DT-compatible software node
declarations.
The other updates are for the MAINTAINERS file, correcting some stale
or missing entries"
* tag 'soc-arm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: pxa: fix build breakage on PXA3xx
ti: omap: MAINTAINERS: move Benoît Cousson to CREDITS
amazon: MAINTAINERS: change to odd fixes and Tsahee Zidenberg to CREDITS
MAINTAINERS: thead: add git tree
ARM: spitz: Use software nodes for the ADS7846 touchscreen
ARM: spitz: Use software nodes to describe LED GPIOs
ARM: spitz: Use software nodes to describe MMC GPIOs
ARM: spitz: Use software nodes to describe LCD GPIOs
ARM: spitz: Use software nodes to describe audio GPIOs
ARM: spitz: Use software nodes to describe SPI CS lines
ARM: spitz: Simplify instantiating SPI controller
ARM: pxa/gumstix: convert vbus gpio to use software nodes
ARM: pxa: consolidate GPIO chip platform data
ARM: spitz: fix GPIO assignment for backlight
ARM: tegra: paz00: Use software nodes to describe GPIOs for WiFi rfkill
MAINTAINERS: ARM: airoha: add entry to cover Airoha SoC
bus: vexpress-config: Add missing MODULE_DESCRIPTION() macro
arm64: layerscape: remove redundant EDAC_SUPPORT selection
dt-bindings: arm: Remove obsolete RTSM DCSCB binding
arm: vexpress: Remove obsolete RTSM DCSCB support
|
|
Pull SoC dt updates from Arnd Bergmann:
"The devicetree updates are fairly well spread out across platforms,
with Qualcomm making up about a third of the total.
There are three new SoCs in existing product families this:
- NXP i.MX95 is a variant of i.MX93, now with six Cortex-A55 cores
instead of just two as well as a GPU and more high-speed I/O
devices.
- Qualcomm QCS8550 is a variant of SM8550 for IOT devices
- Airoha EN7581 is a 10G-PON network chip and related to the MT7981
Wireless router chip from its parent Mediatek.
In total there are 58 new machines, including four riscv boards and
eight for 32-bit arm.
The most exciting new addition is probably a pair of laptops based on
the Qualcomm x1e80100 (Snapdragon X1 Elite) chip, the Asus Vivobook
S15 and the Lenovo Yoga Slim7x.
Other noteworthy new additions are:
- A total of 20 Qualcomm based machines, mostly Android devices from
Samsung, Motorola and LG, as well as a wireless router and some
reference designs
- Six NXP i.MX based machines, mostly industrial boards along with
some reference designs
- Mediatek sees some interesting Filogic based routers including the
"OpenWRT One", a few new Chromebooks as well as single-board
computers.
- Four machines from Solidrun based on Marvell cn913x, replacing the
older Armada 8000 based counterparts
- The four Amlogic machines are all set top boxes or reference
designs for them
- The nine new Rockchips machines are mostly single-board computers
including some interesting ones based on the rk3588 chip like the
ROCK 5 ITX board and the CM3588 with its four NVMe slots
- The RISC-V boards are all single-board computers based on Starfive
JH7110, Microchip MPFS and Allwinner D1, which all had similar
boards already
There are also a lot of updates to already supported machines, notably
for the TI K3, Rockchips, Freescale and of course Qualcomm platforms"
* tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (846 commits)
arm64: dts: allwinner: h616: add crypto engine node
riscv: dts: add clock generator for Sophgo SG2042 SoC
arm64: dts: rockchip: Add Xunlong Orange Pi 3B
dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3B
arm64: dts: rockchip: Add Radxa ROCK 3B
dt-bindings: arm: rockchip: Add Radxa ROCK 3B
mailmap: Update Luca Weiss's email address
ARM: dts: ixp4xx: nslu2: beeper uses PWM
arm64: dts: rockchip: add ROCK 5 ITX board
dt-bindings: arm: rockchip: Add ROCK 5 ITX board
arm64: dts: rockchip: Add dma-names to uart1 on Pine64 rk3566 devices
arm64: dts: rockchip: Add avdd supplies to hdmi on rock64
arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE
arm64: dts: qcom: msm8916-lg-m216: Add initial device tree
dt-bindings: arm: qcom: Add msm8916 based LG devices
ARM: dts: qcom: msm8960: correct memory base
arm64: dts: qcom: ipq9574: Add icc provider ability to gcc
dt-bindings: interconnect: Add Qualcomm IPQ9574 support
arm64: dts: qcom: sm8150: Add video clock controller node
arm64: dts: qcom: pm6150: Add vibrator
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The updates to the mediatek, allwinner, ti, tegra, microchip, stm32,
samsung, imx, zynq and amlogic platoforms are fairly small maintenance
changes, either addressing minor mistakes or enabling additional
hardware.
The qualcomm platform changes add a number of features and are larger
than the other ones combined, introducing the use of linux/cleanup.h
across several drivers, adding support for Snapdragon X1E and other
SoCs in platform drivers, a new "protection domain mapper" driver, and
a "shared memory bridge" driver.
The cznic "turris omnia" router based on Marvell Armada gets a
platform driver that talks to the board specific microcontroller.
The reset and cache subsystems get a few minor updates to SoC specific
drivers, while the ff-a, scmi and optee firmware drivers get some code
refactoring and new features"
* tag 'soc-drivers-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (122 commits)
firmware: turris-mox-rwtm: Initialize completion before mailbox
firmware: turris-mox-rwtm: Fix checking return value of wait_for_completion_timeout()
firmware: turris-mox-rwtm: Do not complete if there are no waiters
MAINTAINERS: drop riscv list from cache controllers
platform: cznic: turris-omnia-mcu: fix Kconfig dependencies
bus: sunxi-rsb: Constify struct regmap_bus
soc: sunxi: sram: Constify struct regmap_config
platform: cznic: turris-omnia-mcu: Depend on WATCHDOG
platform: cznic: turris-omnia-mcu: Depend on OF
soc: samsung: exynos-pmu: add support for PMU_ALIVE non atomic registers
arm64: stm32: enable scmi regulator for stm32
firmware: qcom: tzmem: blacklist more platforms for SHM Bridge
soc: qcom: wcnss: simplify with cleanup.h
soc: qcom: pdr: simplify with cleanup.h
soc: qcom: ocmem: simplify with cleanup.h
soc: qcom: mdt_loader: simplify with cleanup.h
soc: qcom: llcc: simplify with cleanup.h
firmware: qcom: tzmem: simplify returning pointer without cleanup
soc: qcom: socinfo: Add PM6350 PMIC
arm64: dts: renesas: rz-smarc: Replace fixed regulator for USB VBUS
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"There's some quite exciting core work in this release, we've got the
beginnings of support for hardware initiated transfers which is itself
independently useful for optimising fast paths in existing drivers.
We also have a rework of the DMA mapping which allows finer grained
decisions about DMA mapping messages and also helps remove some bodges
that we'd had.
Otherwise it's a fairly quiet release, a few new drivers and features
for existing drivers, together with various cleanups and DT binding
conversions.
One regmap SPI fix made it's way in here too which I should probably
have sent as a regmap fix instead.
Summary:
- Support for pre-optimising messages, reducing the overhead for
messages that are repeatedly used (eg, reading the interrupt status
from a device). This will also be used for hardware initiated
transfers in future.
- A reworking of how DMA mapping is done, introducing a new helper
and allowing the DMA mapping decision to be done per transfer
instead of per message.
- Support for Atmel SAMA7D64, Freescale LX2160A DSPI and WCH CH341A"
* tag 'spi-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (72 commits)
spi: dt-bindings: at91: Add sama7d65 compatible string
spi: add ch341a usb2spi driver
spi: dt-bindings: fsl-dspi: add compatible string 'fsl,lx2160a-dspi'
spi: dt-bindings: fsl-dspi: add dmas and dma-names properties
spi: spi: Remove unnecessary ‘0’ values from status
spi: spi: Remove unnecessary ‘0’ values from rc
spi: xcomm: fix coding style
spi: xcomm: remove i2c_set_clientdata()
spi: xcomm: make use of devm_spi_alloc_host()
spi: xcomm: add gpiochip support
spi: dt-bindings: snps,dw-apb-ssi.yaml: update compatible property
spi: dt-bindings: fsl-dspi: Convert to yaml format
spi: fsl-dspi: use common proptery 'spi-cs-setup(hold)-delay-ns'
spi: axi-spi-engine: remove platform_set_drvdata()
spi: spi-fsl-lpspi: Pass pm_ptr()
spi: spi-imx: Pass pm_ptr()
spi: spi-fsl-lpspi: Switch to SYSTEM_SLEEP_PM_OPS()
spi: spi-imx: Switch to RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS()
spi: add EXPORT_SYMBOL_GPL(devm_spi_optimize_message)
spi: add devm_spi_optimize_message() helper
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC host:
- Convert from using tasklet to the BH workqueue
- dw_mmc-bluefield: Add support for eMMC HW reset
- mmc_spi: Allow spi controllers incapable of lower than 400kHz
- sdhci: Rework code to eliminate SDHCI_QUIRK_UNSTABLE_RO_DETECT
- sdhci-brcmstb: Add support for the BCM2712 variant
- sdhci-esdhc-imx: Disable card-detect as system wakeup on S32G platforms
- sdhci-msm: Add support for the SDX75 variant
- sdhci-of-dwcmshc: Enable CQE support for some Rockchip variants
- sdhci-of-esdhc: Convert DT-bindings to yaml
- sdhci-sprd: Convert DT-bindings to yaml
MEMSTICK:
- rtsx_pci_ms: Remove the unused Realtek PCI memstick driver"
* tag 'mmc-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (26 commits)
MAINTAINERS: add 's32@nxp.com' as relevant mailing list for 'sdhci-esdhc-imx' driver
mmc: sdhci-esdhc-imx: obtain the 'per' clock rate after its enablement
mmc: sdhci-esdhc-imx: disable card detect wake for S32G based platforms
dt-bindings: mmc: sdhci-sprd: convert to YAML
mmc: davinci_mmc: report all possible bus widths
mmc: dw_mmc-bluefield: Add support for eMMC HW reset
mmc: dw_mmc: Add support for platform specific eMMC HW reset
mmc: sdhci_am654: Constify struct regmap_config
mmc: Convert from tasklet to BH workqueue
mmc: sdhi: Convert from tasklet to BH workqueue
mmc: mmc_spi: allow for spi controllers incapable of getting as low as 400k
memstick: rtsx_pci_ms: Remove Realtek PCI memstick driver
MAINTAINERS: drop entry for VIA SD/MMC controller
mmc: tmio: Remove obsolete .set_pwr() callback()
mfd: tmio: Remove obsolete .set_clk_div() callback
mmc: sdhci-brcmstb: Add ARCH_BCM2835 option
mmc: sdhci: Eliminate SDHCI_QUIRK_UNSTABLE_RO_DETECT
dt-bindings: mmc: Convert fsl-esdhc.txt to yaml
dt-bindings: mmc: mmc-spi-slot: Change voltage-ranges to uint32-matrix
mmc: add missing MODULE_DESCRIPTION() macros
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"This contains the usual mix of fixes, cleanups, two new drivers and
several dt binding updates. The fixes are for minor issues that are
already old (4.11-rc1 and 3.9-rc1) and were found by code review and
not during usage, so I didn't sent them for earlier inclusion.
The changes to include/linux/mfd/stm32-timers.h and
drivers/counter/stm32-timer-cnt.c are part of an immutable branch that
will also be included in the mfd and counter pulls. It changes some
register definitions and affects the pwm-stm32 driver.
Thanks go to Andy Shevchenko, AngeloGioacchino Del Regno, Conor
Dooley, David Lechner, Dhruva Gole, Drew Fustini, Frank Li, Jeff
Johnson, Junyi Zhao, Kelvin Zhang, Krzysztof Kozlowski, Lee Jones,
Linus Walleij, Linus Walleij, Michael Hennerich, Nicola Di Lieto,
Nicolas Ferre, Nuno Sa, Paul Cercueil, Raag Jadav, Rob Herring, Sean
Anderson, Sean Young, Shenwei Wang, Stefan Wahren, Trevor Gamblin,
Tzung-Bi Shih, Vincent Whitchurch and William Breathitt Gray for their
contributions to this pull request; they authored changes, spend time
reviewing changes and coordinated the above mentioned immutable
branch"
* tag 'pwm/for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (38 commits)
pwm: axi-pwmgen: add .max_register to regmap
dt-bindings: pwm: at91: Add sama7d65 compatible string
pwm: atmel-tcb: Make private data variable naming consistent
pwm: atmel-tcb: Simplify checking the companion output
pwm: Allow pwm state transitions from an invalid state
pwm: xilinx: Simplify using devm_ functions
pwm: Use guards for pwm_lookup_lock instead of explicity mutex_lock + mutex_unlock
pwm: Use guards for export->lock instead of explicity mutex_lock + mutex_unlock
pwm: Use guards for pwm_lock instead of explicity mutex_lock + mutex_unlock
pwm: Register debugfs operations after the pwm class
pwm: imx-tpm: Enable pinctrl setting for sleep state
pwm: lpss: drop redundant runtime PM handles
pwm: lpss: use devm_pm_runtime_enable() helper
pwm-stm32: Make use of parametrised register definitions
dt-bindings: pwm: imx: remove interrupt property from required
pwm: meson: Add support for Amlogic S4 PWM
pwm: Add GPIO PWM driver
dt-bindings: pwm: Add pwm-gpio
pwm: Drop pwm_apply_state()
bus: ts-nbus: Use pwm_apply_might_sleep()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"Obsolete driver removals:
- Removed obsolete adm1021 and max6642 drivers
New drivers:
- MPS MP2891, MP2993, MP9941, and MP5920
- SPD5118 (Temperature Sensor and EEPROM)
Added device support to existing drivers:
- g762: G761
- dell-smm: Dell OptiPlex 7060
- asus-ec-sensors: ProArt X670E-CREATOR WIFI
- corsair-psu: HX1200i Series 2023 psu
- nzxt-smart2: Additional USB IS for NZXT RGB & Fan Controller
Notable enhancements and fixes:
- Removed use of i2c_match_id()
- Constified struct regmap_config where feasible
- Cleaned up amc6821 driver, and converted to use regmap and
with_info API
- Converted max6639 driver to use with_info API; added support for
additional sysfs attributes
- Fixed various sysfs attribute underflows
- Added PEC support to hwmon core, and use in lm90 and max31827
drivers
And various other minor fixes and improvements"
* tag 'hwmon-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (103 commits)
hwmon: (max6697) Fix swapped temp{1,8} critical alarms
hwmon: (max6697) Fix underflow when writing limit attributes
hwmon: Remove obsolete adm1021 and max6642 drivers
hwmon: (pmbus/ltc4286) Drop unused i2c device ids
hwmon: (g762) Initialize fans after configuring clock
hwmon: (amc6821) Add support for pwm1_mode attribute
hwmon: (amc6821) Convert to with_info API
hwmon: (amc6821) Convert to use regmap
hwmon: (amc6821) Drop unnecessary enum chips
hwmon: (amc6821) Use BIT() and GENMASK()
hwmon: (amc6821) Use tabs for column alignment in defines
hwmon: (amc6821) Reorder include files, drop unnecessary ones
hwmon: (amc6821) Add support for fan1_target and pwm1_enable mode 4
hwmon: (amc6821) Rename fan1_div to fan1_pulses
hwmon: (amc6821) Make reading and writing fan speed limits consistent
hwmon: (amc6821) Stop accepting invalid pwm values
hwmon: (w83627ehf) Fix underflows seen when writing limit attributes
hwmon: (nct6775-core) Fix underflows seen when writing limit attributes
hwmon: (lm95234) Fix underflows seen when writing limit attributes
hwmon: (adc128d818) Fix underflows seen when writing limit attributes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing updates from Bartosz Golaszewski:
"This has been in development since last year's Linux Plumbers
Conference and was inspired by the need to enable support upstream for
Bluetooth/WLAN chips on Qualcomm platforms.
The main problem we're fixing is powering up devices which are
represented as separate objects in the kernel (binding to different
drivers) but which share parts of the power-up sequence and thus need
some kind of a mediator who knows the possible interactions and can
assure they don't interfere with neither device's bring up. An example
of such an inter-driver interaction is the WCN family of BT/WLAN chips
from Qualcomm of which some models require the user to observe a
certain delay between driving the bt-enable and wlan-enable GPIOs.
This is not a new problem but up to this point all attempts at
addressing it ended up hitting one wall or another and being dropped.
The main obstacle was the fact that most these attempts tried to
introduce the concept of a "power sequence" into the device-tree
bindings which breaks the main DT rule: describe the hardware, not its
behavior. The solution I proposed focuses on making the power
sequencer drivers interpret the actual HW description flexibly. More
details on that are in the linked cover letter.
The second problem fixed here is powering up PCI devices before they
are detected on the bus. This is achieved by creating special platform
devices for device-tree nodes describing hard-wired PCI devices which
bind to the so-called PCI power control drivers which enable required
resources and trigger a bus rescan once the controlled device is up
then setup the correct devlink hierarchy for power-management.
By combining the two new frameworks we implemented the power
sequencing PCI power control driver which is capable of powering up
the WLAN modules of the QCom WCN family of chipsets.
All this has spent a significant amount of time in linux-next and
enabled WLAN/BT support on several Qualcomm platforms. To further
prove that this is useful and needed: right after this was picked up
into next, I was sent a series using the subsystem for a similar
use-case on Amlogic platforms.
This contains the core power sequencing framework, the first driver,
PCI changes using the pwrseq library (blessed by Bjorn Helgaas) and
some fixes that came later"
* tag 'pwrseq-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
PCI/pwrctl: only call of_platform_populate() if CONFIG_OF is enabled
power: sequencing: simplify returning pointer without cleanup
PCI/pwrctl: Add a PCI power control driver for power sequenced devices
PCI/pwrctl: Add PCI power control core code
PCI/pwrctl: Create platform devices for child OF nodes of the port node
PCI/pwrctl: Reuse the OF node for power controlled devices
PCI: Hold the rescan mutex when scanning for the first time
power: pwrseq: add a driver for the PMU module on the QCom WCN chipsets
power: sequencing: implement the pwrseq core
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"New code:
- Add "cros_ec_hwmon" driver to expose fan speed and temperature
- Add "cros_charge-control" driver to control charge thresholds and
behaviour
- Add module parameter "log_poll_period_ms" in cros_ec_debugfs for
tuning the poll period
- Support version 3 of EC_CMD_GET_NEXT_EVENT and keyboard matrix
Fixes:
- Fix a race condition in accessing MEC (Microchip EC) memory between
ACPI and kernel. Serialize the memory access by an AML (ACPI
Machine Language) mutex
- Fix an issue of wrong EC message version in cros_ec_debugfs
Misc:
- Fix kernel-doc errors and cleanups"
* tag 'tag-chrome-platform-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (28 commits)
power: supply: cros_charge-control: Fix signedness bug in charge_behaviour_store()
power: supply: cros_charge-control: Avoid accessing attributes out of bounds
power: supply: cros_charge-control: don't load if Framework control is present
power: supply: add ChromeOS EC based charge control driver
platform/chrome: cros_ec_proto: Introduce cros_ec_get_cmd_versions()
platform/chrome: Update binary interface for EC-based charge control
ACPI: battery: add devm_battery_hook_register()
dt-bindings: input: cros-ec-keyboard: Add keyboard matrix v3.0
platform/chrome: cros_ec_lpc: Handle zero length read/write
platform/chrome: cros_ec_lpc: Fix error code in cros_ec_lpc_mec_read_bytes()
platform/chrome: cros_ec_debugfs: fix wrong EC message version
platform/chrome: cros_ec_proto: update Kunit test for get_next_data_v3
platform/chrome: cros_ec_proto: add missing MODULE_DESCRIPTION() macro
hwmon: (cros_ec) Fix access to restricted __le16
hwmon: (cros_ec) Prevent read overflow in probe()
platform/chrome: cros_ec_lpc: Add quirks for Framework Laptop
platform/chrome: cros_ec_lpc: Add a new quirk for AML mutex
platform/chrome: cros_ec_lpc: Add a new quirk for ACPI id
platform/chrome: cros_ec_lpc: MEC access can use an AML mutex
platform/chrome: cros_ec_lpc: MEC access can return error code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Added Michal Koutný as a maintainer
- Counters in pids.events were behaving inconsistently. pids.events
made properly hierarchical and pids.events.local added
- misc.peak and misc.events.local added
- cpuset remote partition creation and cpuset.cpus.exclusive handling
improved
- Code cleanups, non-critical fixes, doc updates
- for-6.10-fixes is merged in to receive two non-critical fixes that
didn't trigger pull
* tag 'cgroup-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (23 commits)
cgroup: Add Michal Koutný as a maintainer
cgroup/misc: Introduce misc.events.local
cgroup/rstat: add force idle show helper
cgroup: Protect css->cgroup write under css_set_lock
cgroup/misc: Introduce misc.peak
cgroup_misc: add kernel-doc comments for enum misc_res_type
cgroup/cpuset: Prevent UAF in proc_cpuset_show()
selftest/cgroup: Update test_cpuset_prs.sh to match changes
cgroup/cpuset: Make cpuset.cpus.exclusive independent of cpuset.cpus
cgroup/cpuset: Delay setting of CS_CPU_EXCLUSIVE until valid partition
selftest/cgroup: Fix test_cpuset_prs.sh problems reported by test robot
cgroup/cpuset: Fix remote root partition creation problem
cgroup: avoid the unnecessary list_add(dying_tasks) in cgroup_exit()
cgroup/cpuset: Optimize isolated partition only generate_sched_domains() calls
cgroup/cpuset: Reduce the lock protecting CS_SCHED_LOAD_BALANCE
kernel/cgroup: cleanup cgroup_base_files when fail to add cgroup_psi_files
selftests: cgroup: Add basic tests for pids controller
selftests: cgroup: Lexicographic order in Makefile
cgroup/pids: Add pids.events.local
cgroup/pids: Make event counters hierarchical
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Update Tasks RCU and Tasks Rude RCU description in Requirements.rst
and clarify rcu_assign_pointer() and rcu_dereference() ordering
properties
- Add lockdep assertions for RCU readers, limit inline wakeups for
callback-bypass synchronize_rcu(), add an
rcutree.nohz_full_patience_delay to reduce nohz_full OS jitter, add
Uladzislau Rezki as RCU maintainer, and fix a subtle
callback-migration memory-ordering issue
- Remove a number of redundant memory barriers
- Remove unnecessary bypass-list lock-contention mitigation, use
parking API instead of open-coded ad-hoc equivalent, and upgrade
obsolete comments
- Revert avoidance of a deadlock that can no longer occur and properly
synchronize Tasks Trace RCU checking of runqueues
- Add tests for handling of double-call_rcu() bug, add missing
MODULE_DESCRIPTION, and add a script that histograms the number of
calls to RCU updaters
- Fill out SRCU polled-grace-period API
* tag 'rcu.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (29 commits)
rcu: Fix rcu_barrier() VS post CPUHP_TEARDOWN_CPU invocation
rcu: Eliminate lockless accesses to rcu_sync->gp_count
MAINTAINERS: Add Uladzislau Rezki as RCU maintainer
rcu: Add rcutree.nohz_full_patience_delay to reduce nohz_full OS jitter
rcu/exp: Remove redundant full memory barrier at the end of GP
rcu: Remove full memory barrier on RCU stall printout
rcu: Remove full memory barrier on boot time eqs sanity check
rcu/exp: Remove superfluous full memory barrier upon first EQS snapshot
rcu: Remove superfluous full memory barrier upon first EQS snapshot
rcu: Remove full ordering on second EQS snapshot
srcu: Fill out polled grace-period APIs
srcu: Update cleanup_srcu_struct() comment
srcu: Add NUM_ACTIVE_SRCU_POLL_OLDSTATE
srcu: Disable interrupts directly in srcu_gp_end()
rcu: Disable interrupts directly in rcu_gp_init()
rcu/tree: Reduce wake up for synchronize_rcu() common case
rcu/tasks: Fix stale task snaphot for Tasks Trace
tools/rcu: Add rcu-updaters.sh script
rcutorture: Add missing MODULE_DESCRIPTION() macros
rcutorture: Fix rcu_torture_fwd_cb_cr() data race
...
|
|
Pull block updates from Jens Axboe:
- NVMe updates via Keith:
- Device initialization memory leak fixes (Keith)
- More constants defined (Weiwen)
- Target debugfs support (Hannes)
- PCIe subsystem reset enhancements (Keith)
- Queue-depth multipath policy (Redhat and PureStorage)
- Implement get_unique_id (Christoph)
- Authentication error fixes (Gaosheng)
- MD updates via Song
- sync_action fix and refactoring (Yu Kuai)
- Various small fixes (Christoph Hellwig, Li Nan, and Ofir Gal, Yu
Kuai, Benjamin Marzinski, Christophe JAILLET, Yang Li)
- Fix loop detach/open race (Gulam)
- Fix lower control limit for blk-throttle (Yu)
- Add module descriptions to various drivers (Jeff)
- Add support for atomic writes for block devices, and statx reporting
for same. Includes SCSI and NVMe (John, Prasad, Alan)
- Add IO priority information to block trace points (Dongliang)
- Various zone improvements and tweaks (Damien)
- mq-deadline tag reservation improvements (Bart)
- Ignore direct reclaim swap writes in writeback throttling (Baokun)
- Block integrity improvements and fixes (Anuj)
- Add basic support for rust based block drivers. Has a dummy null_blk
variant for now (Andreas)
- Series converting driver settings to queue limits, and cleanups and
fixes related to that (Christoph)
- Cleanup for poking too deeply into the bvec internals, in preparation
for DMA mapping API changes (Christoph)
- Various minor tweaks and fixes (Jiapeng, John, Kanchan, Mikulas,
Ming, Zhu, Damien, Christophe, Chaitanya)
* tag 'for-6.11/block-20240710' of git://git.kernel.dk/linux: (206 commits)
floppy: add missing MODULE_DESCRIPTION() macro
loop: add missing MODULE_DESCRIPTION() macro
ublk_drv: add missing MODULE_DESCRIPTION() macro
xen/blkback: add missing MODULE_DESCRIPTION() macro
block/rnbd: Constify struct kobj_type
block: take offset into account in blk_bvec_map_sg again
block: fix get_max_segment_size() warning
loop: Don't bother validating blocksize
virtio_blk: Don't bother validating blocksize
null_blk: Don't bother validating blocksize
block: Validate logical block size in blk_validate_limits()
virtio_blk: Fix default logical block size fallback
nvmet-auth: fix nvmet_auth hash error handling
nvme: implement ->get_unique_id
block: pass a phys_addr_t to get_max_segment_size
block: add a bvec_phys helper
blk-lib: check for kill signal in ioctl BLKZEROOUT
block: limit the Write Zeroes to manually writing zeroes fallback
block: refacto blkdev_issue_zeroout
block: move read-only and supported checks into (__)blkdev_issue_zeroout
...
|
|
Pull io_uring updates from Jens Axboe:
"Here are the io_uring updates queued up for 6.11.
Nothing major this time around, various minor improvements and
cleanups/fixes. This contains:
- Add bind/listen opcodes. Main motivation is to support direct
descriptors, to avoid needing a regular fd just for doing these two
operations (Gabriel)
- Probe fixes (Gabriel)
- Treat io-wq work flags as atomics. Not fixing a real issue, but may
as well and it silences a KCSAN warning (me)
- Cleanup of rsrc __set_current_state() usage (me)
- Add 64-bit for {m,f}advise operations (me)
- Improve performance of data ring messages (me)
- Fix for ring message overflow posting (Pavel)
- Fix for freezer interaction with TWA_NOTIFY_SIGNAL. Not strictly an
io_uring thing, but since TWA_NOTIFY_SIGNAL was originally added
for faster task_work signaling for io_uring, bundling it with this
pull (Pavel)
- Add Pavel as a co-maintainer
- Various cleanups (me, Thorsten)"
* tag 'for-6.11/io_uring-20240714' of git://git.kernel.dk/linux: (28 commits)
io_uring/net: check socket is valid in io_bind()/io_listen()
kernel: rerun task_work while freezing in get_signal()
io_uring/io-wq: limit retrying worker initialisation
io_uring/napi: Remove unnecessary s64 cast
io_uring/net: cleanup io_recv_finish() bundle handling
io_uring/msg_ring: fix overflow posting
MAINTAINERS: change Pavel Begunkov from io_uring reviewer to maintainer
io_uring/msg_ring: use kmem_cache_free() to free request
io_uring/msg_ring: check for dead submitter task
io_uring/msg_ring: add an alloc cache for io_kiocb entries
io_uring/msg_ring: improve handling of target CQE posting
io_uring: add io_add_aux_cqe() helper
io_uring: add remote task_work execution helper
io_uring/msg_ring: tighten requirement for remote posting
io_uring: Allocate only necessary memory in io_probe
io_uring: Fix probe of disabled operations
io_uring: Introduce IORING_OP_LISTEN
io_uring: Introduce IORING_OP_BIND
net: Split a __sys_listen helper for io_uring
net: Split a __sys_bind helper for io_uring
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull iomap updates from Christian Brauner:
"This contains some minor work for the iomap subsystem:
- Add documentation on the design of iomap and how to port to it
- Optimize iomap_read_folio()
- Bring back the change to iomap_write_end() to no increase i_size.
This is accompanied by a change to xfs to reserve blocks for
truncating large realtime inodes to avoid exposing stale data when
iomap_write_end() stops increasing i_size"
* tag 'vfs-6.11.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: don't increase i_size in iomap_write_end()
xfs: reserve blocks for truncating large realtime inode
Documentation: the design of iomap and how to port
iomap: Optimize iomap_read_folio
|
|
Create a bare-bones PCI driver for Meta's NIC.
Subsequent changes will flesh it out.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/172079935646.1778861.9710282776096050607.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge cpufreq changes for 6.11-rc1:
- Add Loongson-3 CPUFreq driver support (Huacai Chen).
- Add support for the Arrow Lake and Lunar Lake platforms and
the out-of-band (OOB) mode on Emerald Rapids to the intel_pstate
cpufreq driver, make it support the highest performance change
interrupt and clean it up (Srinivas Pandruvada).
- Switch cpufreq to new Intel CPU model defines (Tony Luck).
- Simplify the cpufreq driver interface by switching the .exit() driver
callback to the void return data type (Lizhe, Viresh Kumar).
- Make cpufreq_boost_enabled() return bool (Dhruva Gole).
- Add fast CPPC support to the amd-pstate cpufreq driver, address
multiple assorted issues in it and clean it up (Perry Yuan, Mario
Limonciello, Dhananjay Ugwekar, Meng Li, Xiaojian Du).
- Add Allwinner H700 speed bin to the sun50i cpufreq driver (Ryan
Walklin).
- Fix memory leaks and of_node_put() usage in the sun50i and qcom-nvmem
cpufreq drivers (Javier Carrasco).
- Clean up the sti and dt-platdev cpufreq drivers (Jeff Johnson,
Raphael Gallais-Pou).
- Fix deferred probe handling in the TI cpufreq driver and wrong return
values of ti_opp_supply_probe(), and add OPP tables for the AM62Ax and
AM62Px SoCs to it (Bryan Brattlof, Primoz Fiser).
- Avoid overflow of target_freq in .fast_switch() in the SCMI cpufreq
driver (Jagadeesh Kona).
- Use dev_err_probe() in every error path in probe in the Mediatek
cpufreq driver (Nícolas Prado).
- Fix kernel-doc param for longhaul_setstate in the longhaul cpufreq
driver (Yang Li).
- Fix system resume handling in the CPPC cpufreq driver (Riwen Lu).
* pm-cpufreq: (55 commits)
cpufreq: sti: fix build warning
cpufreq: mediatek: Use dev_err_probe in every error path in probe
cpufreq: Add Loongson-3 CPUFreq driver support
cpufreq: Make cpufreq_driver->exit() return void
cpufreq/amd-pstate: Fix the scaling_max_freq setting on shared memory CPPC systems
cpufreq/amd-pstate-ut: Convert nominal_freq to khz during comparisons
cpufreq: pcc: Remove empty exit() callback
cpufreq: loongson2: Remove empty exit() callback
cpufreq: nforce2: Remove empty exit() callback
cpufreq: docs: Add missing scaling_available_frequencies description
cpufreq: make cpufreq_boost_enabled() return bool
cpufreq: intel_pstate: Support highest performance change interrupt
x86/cpufeatures: Add HWP highest perf change feature flag
Documentation: cpufreq: amd-pstate: update doc for Per CPU boost control method
cpufreq: amd-pstate: Cap the CPPC.max_perf to nominal_perf if CPB is off
cpufreq: amd-pstate: initialize core precision boost state
cpufreq: acpi: move MSR_K7_HWCR_CPB_DIS_BIT into msr-index.h
cpufreq: sti: add missing MODULE_DEVICE_TABLE entry for stih418
cpufreq: intel_pstate: Replace boot_cpu_has()
cpufreq: ti: update OPP table for AM62Px SoCs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into HEAD
Initial implementation of the power sequencing subsystem for linux v6.11
|
|
When adding the bindings for cache controllers to the MAINTAINERS entry,
I forgot to drop the riscv mailing list - and so completely unrelated to
riscv stuff is now being sent there. Drop it.
Fixes: 4ca47d8bcca0 ("MAINTAINERS: add cache binding directory to cache driver entry")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Move all Renesas thermal drivers to a vendor specific directory.
All drivers are moved verbatim apart from the updated include path for
thermal_hwmon.h.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240506154011.344324-2-niklas.soderlund+renesas@ragnatech.se
|
|
|
|
Add airoha_eth driver in order to introduce ethernet support for
Airoha EN7581 SoC available on EN7581 development board (en7581-evb).
EN7581 mac controller is mainly composed by the Frame Engine (PSE+PPE)
and QoS-DMA (QDMA) modules. FE is used for traffic offloading (just
basic functionalities are currently supported) while QDMA is used for
DMA operations and QOS functionalities between the mac layer and the
external modules conncted to the FE GDM ports (e.g MT7530 DSA switch
or external phys).
A general overview of airoha_eth architecture is reported below:
┌───────┐ ┌───────┐
│ QDMA2 │ │ QDMA1 │
└───┬───┘ └───┬───┘
│ │
┌───────▼─────────────────────────────────────────────▼────────┐
│ │
│ P5 P0 │
│ │
│ │
│ │ ┌──────┐
│ P3 ├────► GDM3 │
│ │ └──────┘
│ │
│ │
┌─────┐ │ │
│ PPE ◄────┤ P4 PSE │
└─────┘ │ │
│ │
│ │
│ │ ┌──────┐
│ P9 ├────► GDM4 │
│ │ └──────┘
│ │
│ │
│ │
│ P2 P1 │
└─────────┬───────────────────────────────────────────┬────────┘
│ │
┌───▼──┐ ┌──▼───┐
│ GDM2 │ │ GDM1 │
└──────┘ └──┬───┘
│
┌────▼─────┐
│ MT7530 │
└──────────┘
Currently only hw LAN features (QDMA1+GDM1) are available while hw WAN
(QDMA2+GDM{2,3,4}) ones will be added with subsequent patches introducing
traffic offloading support.
Tested-by: Benjamin Larsson <benjamin.larsson@genexis.eu>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/274945d2391c195098ab180a46d0617b18b9e42c.1720818878.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Fixes for the I2C testunit, the Renesas R-Car driver and some
MAINTAINERS corrections"
* tag 'i2c-for-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: testunit: avoid re-issued work after read message
i2c: rcar: ensure Gen3+ reset does not disturb local targets
i2c: mark HostNotify target address as used
i2c: testunit: correct Kconfig description
MAINTAINERS: VIRTIO I2C loses a maintainer, gains a reviewer
MAINTAINERS: delete entries for Thor Thayer
i2c: rcar: clear NO_RXDMA flag after resetting
i2c: rcar: bring hardware to known state when probing
|
|
Following files are part of TCP stack:
- net/ipv4/inet_connection_sock.c
- net/ipv4/inet_hashtables.c
- net/ipv4/inet_timewait_sock.c
- net/ipv6/inet6_connection_sock.c
- net/ipv6/inet6_hashtables.c
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240712234213.3178593-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
f7ce5eb2cb79 ("bnxt_en: Fix crash in bnxt_get_max_rss_ctx_ring()")
20c8ad72eb7f ("eth: bnxt: use the RSS context XArray instead of the local list")
Adjacent changes:
net/ethtool/ioctl.c
503757c80928 ("net: ethtool: Fix RSS setting")
eac9122f0c41 ("net: ethtool: record custom RSS contexts in the XArray")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Michal has been contributing and reviewing patches across cgroup for a while
now. Add him as a maintainer.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Most of these changes are Qualcomm SoC specific and came in just after
I sent out the last set of fixes. This includes two regression fixes
for SoC drivers, a defconfig change to ensure the Lenovo X13s is
usable and 11 changes to DT files to fix regressions and minor
platform specific issues.
Tony and Chunyan step back from their respective maintainership roles
on the omap and unisoc platforms, and Christophe in turn takes over
maintaining some of the Freescale SoC drivers that he has been taking
care of in practice already.
Lastly, there are two trivial fixes for the davinci and sunxi
platforms"
* tag 'arm-fixes-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: Update FREESCALE SOC DRIVERS and QUICC ENGINE LIBRARY
MAINTAINERS: Add more maintainers for omaps
ARM: davinci: Convert comma to semicolon
MAINTAINERS: Move myself from SPRD Maintainer to Reviewer
Revert "dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries"
arm64: dts: qcom: qdu1000: Fix LLCC reg property
arm64: dts: qcom: sm6115: add iommu for sdhc_1
arm64: dts: qcom: x1e80100-crd: fix DAI used for headset recording
arm64: dts: qcom: x1e80100-crd: fix WCD audio codec TX port mapping
soc: qcom: pmic_glink: disable UCSI on sc8280xp
arm64: defconfig: enable Elan i2c-hid driver
arm64: dts: qcom: sc8280xp-crd: use external pull up for touch reset
arm64: dts: qcom: sc8280xp-x13s: fix touchscreen power on
arm64: dts: qcom: x1e80100: Fix PCIe 6a reg offsets and add MHI
arm64: dts: qcom: sa8775p: Correct IRQ number of EL2 non-secure physical timer
arm64: dts: allwinner: Fix PMIC interrupt number
arm64: dts: qcom: sc8280xp: Set status = "reserved" on PSHOLD
arm64: dts: qcom: x1e80100-*: Allocate some CMA buffers
arm64: dts: qcom: sc8180x: Fix LLCC reg property again
|
|
FREESCALE SOC DRIVERS has been orphaned since
commit eaac25d026a1 ("MAINTAINERS: Drop Li Yang as their email address
stopped working")
QUICC ENGINE LIBRARY has Qiang Zhao as maintainer but he hasn't
responded for years and when Li Yang was still maintaining FREESCALE
SOC DRIVERS he was also handling QUICC ENGINE LIBRARY directly.
As a maintainer of LINUX FOR POWERPC EMBEDDED PPC8XX AND PPC83XX, I
also need FREESCALE SOC DRIVERS to be actively maintained, so add
myself as maintainer of FREESCALE SOC DRIVERS and QUICC ENGINE LIBRARY.
See below link for more context.
Link: https://lore.kernel.org/linuxppc-dev/20240219153016.ntltc76bphwrv6hn@skbuf/T/#mf6d4a5eef79e8eae7ae0456a2794c01e630a6756
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
There are many generations of omaps to maintain, and I will be only active
as a hobbyist with time permitting. Let's add more maintainers to ensure
continued Linux support.
TI is interested in maintaining the active SoCs such as am3, am4 and
dra7. And the hobbyists are interested in maintaining some of the older
devices, mainly based on omap3 and 4 SoCs.
Kevin and Roger have agreed to maintain the active TI parts. Both Kevin
and Roger have been working on the omap variants for a long time, and
have a good understanding of the hardware.
Aaro and Andreas have agreed to maintain the community devices. Both Aaro
and Andreas have long experience on working with the earlier TI SoCs.
While at it, let's also change me to be a reviewer for the omap1, and
drop the link to my old omap web page.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
'sdhci-esdhc-imx' driver
Since NXP S32G2 and S32G3 SoCs share the SDHCI controller with
I.MX platforms it would be valuable to add 's32@nxp.com' as a
relevant mailing list in this area.
Signed-off-by: Ciprian Costea <ciprianmarian.costea@oss.nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/20240708121018.246476-4-ciprianmarian.costea@oss.nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/sched/act_ct.c
26488172b029 ("net/sched: Fix UAF when resolving a clash")
3abbd7ed8b76 ("act_ct: prepare for stolen verdict coming from conntrack and nat engine")
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
IFS (In Field Scan) driver exposes its functionality via sysfs interfaces.
Applications prepare and exercise the tests by interacting with the
aforementioned sysfs files.
Verify that the necessary sysfs entries are created after loading the IFS
driver.
Initialize test variables needed for building subsequent kself-test cases.
Reviewed-by: Jithu Joseph <jithu.joseph@intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Co-developed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Pengfei Xu <pengfei.xu@intel.com>
Acked-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Conghui Chen left, welcome Jian as reviewer.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: "Chen, Jian Jun" <jian.jun.chen@intel.com>
|
|
The email address bounced. I couldn't find a newer one in recent git
history. Delete the entries and let them fallback to subsystem defaults.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Thank you Daniel for having been our friend!
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20240708075752.GF11386@noisy.programming.kicks-ass.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"21 hotfixes, 15 of which are cc:stable.
No identifiable theme here - all are singleton patches, 19 are for MM"
* tag 'mm-hotfixes-stable-2024-07-10-13-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio
mm/hugetlb: fix potential race in __update_and_free_hugetlb_folio()
filemap: replace pte_offset_map() with pte_offset_map_nolock()
arch/xtensa: always_inline get_current() and current_thread_info()
sched.h: always_inline alloc_tag_{save|restore} to fix modpost warnings
MAINTAINERS: mailmap: update Lorenzo Stoakes's email address
mm: fix crashes from deferred split racing folio migration
lib/build_OID_registry: avoid non-destructive substitution for Perl < 5.13.2 compat
mm: gup: stop abusing try_grab_folio
nilfs2: fix kernel bug on rename operation of broken directory
mm/hugetlb_vmemmap: fix race with speculative PFN walkers
cachestat: do not flush stats in recency check
mm/shmem: disable PMD-sized page cache if needed
mm/filemap: skip to create PMD-sized page cache if needed
mm/readahead: limit page cache size in page_cache_ra_order()
mm/filemap: make MAX_PAGECACHE_ORDER acceptable to xarray
mm/damon/core: merge regions aggressively when max_nr_regions is unmet
Fix userfaultfd_api to return EINVAL as expected
mm: vmalloc: check if a hash-index is in cpu_possible_mask
mm: prevent derefencing NULL ptr in pfn_section_valid()
...
|
|
Add support for the Analog Devices AXI PWM Generator. This device is an
FPGA-implemented peripheral used as PWM signal generator and can be
interfaced with AXI4. The register map of this peripheral makes it
possible to configure the period and duty cycle of the output signal.
Link: https://analogdevicesinc.github.io/hdl/library/axi_pwm_gen/index.html
Co-developed-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Co-developed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Acked-by: Nuno Sa <nuno.sa@analog.com>
Co-developed-by: Trevor Gamblin <tgamblin@baylibre.com>
Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>
Link: https://lore.kernel.org/r/20240605203507.1934434-3-tgamblin@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
Add Analog Devices AXI PWM generator.
Link: https://analogdevicesinc.github.io/hdl/library/axi_pwm_gen/index.html
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Nuno Sa <nuno.sa@analog.com>
Co-developed-by: Trevor Gamblin <tgamblin@baylibre.com>
Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>
Link: https://lore.kernel.org/r/20240605203507.1934434-2-tgamblin@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
|
|
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge ARM cpufreq updates for 6.11 from Viresh Kumar:
"- cpufreq: Add Loongson-3 CPUFreq driver support (Huacai Chen).
- Make exit() callback return void (Lizhe and Viresh Kumar).
- Minor cleanups and fixes in several drivers (Bryan Brattlof,
Javier Carrasco, Jagadeesh Kona, Jeff Johnson, Nícolas F. R. A. Prado,
Primoz Fiser, Raphael Gallais-Pou, and Riwen Lu)."
* tag 'cpufreq-arm-updates-6.11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (21 commits)
cpufreq: sti: fix build warning
cpufreq: mediatek: Use dev_err_probe in every error path in probe
cpufreq: Add Loongson-3 CPUFreq driver support
cpufreq: Make cpufreq_driver->exit() return void
cpufreq: pcc: Remove empty exit() callback
cpufreq: loongson2: Remove empty exit() callback
cpufreq: nforce2: Remove empty exit() callback
cpufreq: sti: add missing MODULE_DEVICE_TABLE entry for stih418
cpufreq: ti: update OPP table for AM62Px SoCs
cpufreq: ti: update OPP table for AM62Ax SoCs
cpufreq: sun50i: add Allwinner H700 speed bin
cpufreq/cppc: Don't compare desired_perf in target()
OPP: ti: Fix ti_opp_supply_probe wrong return values
cpufreq: ti-cpufreq: Handle deferred probe with dev_err_probe()
cpufreq: dt-platdev: add missing MODULE_DESCRIPTION() macro
cpufreq: longhaul: Fix kernel-doc param for longhaul_setstate
cpufreq: qcom-nvmem: eliminate uses of of_node_put()
cpufreq: qcom-nvmem: fix memory leaks in probe error paths
cpufreq: scmi: Avoid overflow of target_freq in fast switch
cpufreq: sun50i: replace of_node_put() with automatic cleanup handler
...
|
|
Last email from Benoît Cousson was in 2014 [1], so remove him from
maintainers of the TI OMAP platform. Stale maintainer entries hide
information whether subsystem needs help, has a bus-factor or is even
orphaned.
Benoît Cousson, thank you for TI OMAP contributions and maintenance.
[1] https://lore.kernel.org/all/?q=f%3Abcousson%40baylibre.com
Acked-by: Benoît Cousson <bcousson@baylibre.com>
Cc: Benoît Cousson <bcousson@baylibre.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240612084038.18519-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Last email from Tsahee Zidenberg was in 2016 [1], so move Tsahee from
Amazon platform maintainers to credits (thank you for your contributions
and maintenance!). Stale maintainer entries hide information whether
subsystem needs help, has a bus-factor or is even orphaned.
The Amazon platform still has active maintainer - Antoine Tenart -
however there was no maintenance activities coming from Antoine. All
my patches from last 4 years related to Amazon remained unanswered - no
acks, no picks - so document the actual not active status of the
platform by changing it to Odd Fixes.
[1] https://lore.kernel.org/all/?q=f%3Atsahee%40annapurnalabs.com
Cc: Tsahee Zidenberg <tsahee@annapurnalabs.com>
Cc: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240612084038.18519-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add git tree for T-Head device tree files and, in the future, drivers for
the T-Head TH1520 SoC.
Signed-off-by: Drew Fustini <drew@pdp7.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240704180913.2516959-1-drew@pdp7.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.11
Support for Shared Memory (shm) Bridge is added, which provides a
stricter interface for handling of buffers passed to TrustZone.
The X1Elite platform is added to uefisecapp allow list, to instantiate
the efivars implementation.
A new in-kernel implementation of the pd-mapper (or servreg) service is
introduced, to replace the userspace dependency for USB Type-C and
battery management.
Support for sharing interrupts across multiple bwmon instances is added,
and a refcount imbalance issue is corrected.
The LLCC support for recent platforms is corrected, and SA8775P support
is added.
A new interface is added to SMEM, to expose "feature codes". One example
of the usecase for this is to indicate to the GPU driver which
frequencies are available on the given device.
The interrupt consumer and provider side of SMP2P is updated to provide
more useful names in interrupt stats.
Support for using the mailbox binding and driver for outgoing IPC
interrupt in the SMSM driver is introduced.
socinfo driver learns about SDM670 and IPQ5321, as well as get some
updates to the X1E PMICs.
pmic_glink is bumped to now support managing 3 USB Type-C ports.
* tag 'qcom-drivers-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (48 commits)
soc: qcom: smp2p: Use devname for interrupt descriptions
soc: qcom: smsm: Add missing mailbox dependency to Kconfig
soc: qcom: add missing pd-mapper dependencies
soc: qcom: icc-bwmon: Allow for interrupts to be shared across instances
dt-bindings: interconnect: qcom,msm8998-bwmon: Add X1E80100 BWMON instances
dt-bindings: interconnect: qcom,msm8998-bwmon: Remove opp-table from the required list
firmware: qcom: tzmem: export devm_qcom_tzmem_pool_new()
soc: qcom: add pd-mapper implementation
soc: qcom: pdr: extract PDR message marshalling data
soc: qcom: pdr: fix parsing of domains lists
soc: qcom: pdr: protect locator_addr with the main mutex
firmware: qcom: scm: clarify the comment in qcom_scm_pas_init_image()
firmware: qcom: scm: add support for SHM bridge memory carveout
firmware: qcom: tzmem: enable SHM Bridge support
firmware: qcom: scm: add support for SHM bridge operations
firmware: qcom: qseecom: convert to using the TZ allocator
firmware: qcom: scm: make qcom_scm_qseecom_app_get_id() use the TZ allocator
firmware: qcom: scm: make qcom_scm_lmh_dcvsh() use the TZ allocator
firmware: qcom: scm: make qcom_scm_ice_set_key() use the TZ allocator
firmware: qcom: scm: make qcom_scm_assign_mem() use the TZ allocator
...
Link: https://lore.kernel.org/r/20240705034410.13968-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
