| Age | Commit message (Collapse) | Author |
|---|
|
Add bindings for the QTI WCN6855 chipset.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add binding document for NXP bluetooth chipsets attached over UART.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Add compatible string for RTL8821CS for existing Realtek Bluetooth
driver.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The 88W8997 bluetooth module supports setting the max-speed property.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Update the documentation with the device tree binding for the Marvell
88W8997 bluetooth device.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2023-04-20
1) Dragos Improves RX page pool, and provides some fixes to his previous
series:
1.1) Fix releasing page_pool for striding RQ and legacy RQ nonlinear case
1.2) Hook NAPIs to page pools to gain more performance.
2) From Roi, Some cleanups to TC and eswitch modules.
3) Maher migrates vnic diagnostic counters reporting from debugfs to a
dedicated devlink health reporter
Maher Says:
===========
net/mlx5: Expose vnic diagnostic counters using devlink
Currently, vnic diagnostic counters are exposed through the following
debugfs:
$ ls /sys/kernel/debug/mlx5/0000:08:00.0/esw/vf_0/vnic_diag/
cq_overrun
quota_exceeded_command
total_q_under_processor_handle
invalid_command
send_queue_priority_update_flow
nic_receive_steering_discard
The current design does not allow the hypervisor to view the diagnostic
counters of its VFs, in case the VFs get bound to a VM. In other words,
the counters are not exposed for representor interfaces.
Furthermore, the debugfs design is inconvenient future-wise, in case more
counters need to be reported by the driver in the future.
As these counters pertain to vNIC health, it is more appropriate to
utilize the devlink health reporter to expose them.
Thus, this patchest includes the following changes:
* Drop the current vnic diagnostic counters debugfs interface.
* Add a vnic devlink health reporter for PFs/VFs core devices, which
when diagnosed will dump vnic diagnostic counter values that are
queried from FW.
* Add a vnic devlink health reporter for the representor interface, which
serves the same purpose listed in the previous point, in addition to
allowing the hypervisor to view its VFs diagnostic counters, even when
the VFs are bounded to external VMs.
Example of devlink health reporter usage is:
$devlink health diagnose pci/0000:08:00.0 reporter vnic
vNIC env counters:
total_error_queues: 0 send_queue_priority_update_flow: 0
comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0
invalid_command: 0 quota_exceeded_command: 0
nic_receive_steering_discard: 0
===========
4) SW steering fixes and improvements
Yevgeny Kliteynik Says:
=======================
These short patch series are just small fixes / improvements for
SW steering:
- Patch 1: Fix dumping of legacy modify_hdr in debug dump to
align to what is expected by parser
- Patch 2: Have separate threshold for ICM sync per ICM type
- Patch 3: Add more info to the steering debug dump - Linux
version and device name
- Patch 4: Keep track of number of buddies that are currently
in use per domain per buddy type
=======================
* tag 'mlx5-updates-2023-04-20' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Update op_mode to op_mod for port selection
net/mlx5: E-Switch, Remove unused mlx5_esw_offloads_vport_metadata_set()
net/mlx5: E-Switch, Remove redundant dev arg from mlx5_esw_vport_alloc()
net/mlx5: Include linux/pci.h for pci_msix_can_alloc_dyn()
net/mlx5e: RX, Hook NAPIs to page pools
net/mlx5e: RX, Fix XDP_TX page release for legacy rq nonlinear case
net/mlx5e: RX, Fix releasing page_pool pages twice for striding RQ
net/mlx5e: Add vnic devlink health reporter to representors
net/mlx5: Add vnic devlink health reporter to PFs/VFs
Revert "net/mlx5: Expose vnic diagnostic counters for eswitch managed vports"
Revert "net/mlx5: Expose steering dropped packets counter"
net/mlx5: DR, Add memory statistics for domain object
net/mlx5: DR, Add more info in domain dbg dump
net/mlx5: DR, Calculate sync threshold of each pool according to its type
net/mlx5: DR, Fix dumping of legacy modify_hdr in debug dump
====================
Link: https://lore.kernel.org/r/20230421013850.349646-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-04-21
We've added 71 non-merge commits during the last 8 day(s) which contain
a total of 116 files changed, 13397 insertions(+), 8896 deletions(-).
The main changes are:
1) Add a new BPF netfilter program type and minimal support to hook
BPF programs to netfilter hooks such as prerouting or forward,
from Florian Westphal.
2) Fix race between btf_put and btf_idr walk which caused a deadlock,
from Alexei Starovoitov.
3) Second big batch to migrate test_verifier unit tests into test_progs
for ease of readability and debugging, from Eduard Zingerman.
4) Add support for refcounted local kptrs to the verifier for allowing
shared ownership, useful for adding a node to both the BPF list and
rbtree, from Dave Marchevsky.
5) Migrate bpf_for(), bpf_for_each() and bpf_repeat() macros from BPF
selftests into libbpf-provided bpf_helpers.h header and improve
kfunc handling, from Andrii Nakryiko.
6) Support 64-bit pointers to kfuncs needed for archs like s390x,
from Ilya Leoshkevich.
7) Support BPF progs under getsockopt with a NULL optval,
from Stanislav Fomichev.
8) Improve verifier u32 scalar equality checking in order to enable
LLVM transformations which earlier had to be disabled specifically
for BPF backend, from Yonghong Song.
9) Extend bpftool's struct_ops object loading to support links,
from Kui-Feng Lee.
10) Add xsk selftest follow-up fixes for hugepage allocated umem,
from Magnus Karlsson.
11) Support BPF redirects from tc BPF to ifb devices,
from Daniel Borkmann.
12) Add BPF support for integer type when accessing variable length
arrays, from Feng Zhou.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (71 commits)
selftests/bpf: verifier/value_ptr_arith converted to inline assembly
selftests/bpf: verifier/value_illegal_alu converted to inline assembly
selftests/bpf: verifier/unpriv converted to inline assembly
selftests/bpf: verifier/subreg converted to inline assembly
selftests/bpf: verifier/spin_lock converted to inline assembly
selftests/bpf: verifier/sock converted to inline assembly
selftests/bpf: verifier/search_pruning converted to inline assembly
selftests/bpf: verifier/runtime_jit converted to inline assembly
selftests/bpf: verifier/regalloc converted to inline assembly
selftests/bpf: verifier/ref_tracking converted to inline assembly
selftests/bpf: verifier/map_ptr_mixing converted to inline assembly
selftests/bpf: verifier/map_in_map converted to inline assembly
selftests/bpf: verifier/lwt converted to inline assembly
selftests/bpf: verifier/loops1 converted to inline assembly
selftests/bpf: verifier/jeq_infer_not_null converted to inline assembly
selftests/bpf: verifier/direct_packet_access converted to inline assembly
selftests/bpf: verifier/d_path converted to inline assembly
selftests/bpf: verifier/ctx converted to inline assembly
selftests/bpf: verifier/btf_ctx_access converted to inline assembly
selftests/bpf: verifier/bpf_get_stack converted to inline assembly
...
====================
Link: https://lore.kernel.org/r/20230421211035.9111-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.4
Most likely the last -next pull request for v6.4. We have changes all
over. rtw88 now supports SDIO bus and iwlwifi continues to work on
Wi-Fi 7 support. Not much stack changes this time.
Major changes:
cfg80211/mac80211
- fix some Fine Time Measurement (FTM) frames not being bufferable
- flush frames before key removal to avoid potential unencrypted
transmission depending on the hardware design
iwlwifi
- preparation for Wi-Fi 7 EHT and multi-link support
rtw88
- SDIO bus support
- RTL8822BS, RTL8822CS and RTL8821CS SDIO chipset support
rtw89
- framework firmware backwards compatibility
brcmfmac
- Cypress 43439 SDIO support
mt76
- mt7921 P2P support
- mt7996 mesh A-MSDU support
- mt7996 EHT support
- mt7996 coredump support
wcn36xx
- support for pronto v3 hardware
ath11k
- PCIe DeviceTree bindings
- WCN6750: enable SAR support
ath10k
- convert DeviceTree bindings to YAML
* tag 'wireless-next-2023-04-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (261 commits)
wifi: rtw88: Update spelling in main.h
wifi: airo: remove ISA_DMA_API dependency
wifi: rtl8xxxu: Simplify setting the initial gain
wifi: rtl8xxxu: Add rtl8xxxu_write{8,16,32}_{set,clear}
wifi: rtl8xxxu: Don't print the vendor/product/serial
wifi: rtw88: Fix memory leak in rtw88_usb
wifi: rtw88: call rtw8821c_switch_rf_set() according to chip variant
wifi: rtw88: set pkg_type correctly for specific rtw8821c variants
wifi: rtw88: rtw8821c: Fix rfe_option field width
wifi: rtw88: usb: fix priority queue to endpoint mapping
wifi: rtw88: 8822c: add iface combination
wifi: rtw88: handle station mode concurrent scan with AP mode
wifi: rtw88: prevent scan abort with other VIFs
wifi: rtw88: refine reserved page flow for AP mode
wifi: rtw88: disallow PS during AP mode
wifi: rtw88: 8822c: extend reserved page number
wifi: rtw88: add port switch for AP mode
wifi: rtw88: add bitmap for dynamic port settings
wifi: rtw89: mac: use regular int as return type of DLE buffer request
wifi: mac80211: remove return value check of debugfs_create_dir()
...
====================
Link: https://lore.kernel.org/r/20230421104726.800BCC433D2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remaining documentation and Kconfig hook for building the driver.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the devlink parameter switches so the user can enable
the features supported by the VFs. The only feature supported
at the moment is vDPA.
Example:
devlink dev param set pci/0000:2b:00.0 \
name enable_vnet cmode runtime value true
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add in the support for doing firmware updates. Of the two
main banks available, a and b, this updates the one not in
use and then selects it for the next boot.
Example:
devlink dev flash pci/0000:b2:00.0 \
file pensando/dsc_fw_1.63.0-22.tar
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set up the basic adminq and notifyq queue structures. These are
used mostly by the client drivers for feature configuration.
These are essentially the same adminq and notifyq as in the
ionic driver.
Part of this includes querying for device identity and FW
information, so we can make that available to devlink dev info.
$ devlink dev info pci/0000:b5:00.0
pci/0000:b5:00.0:
driver pds_core
serial_number FLM18420073
versions:
fixed:
asic.id 0x0
asic.rev 0x0
running:
fw 1.51.0-73
stored:
fw.goldfw 1.15.9-C-22
fw.mainfwa 1.60.0-73
fw.mainfwb 1.60.0-57
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add devlink health reporting on top of our fw watchdog.
Example:
# devlink health show pci/0000:2b:00.0 reporter fw
pci/0000:2b:00.0:
reporter fw
state healthy error 0 recover 0
# devlink health diagnose pci/0000:2b:00.0 reporter fw
Status: healthy State: 1 Generation: 0 Recoveries: 0
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is the initial PCI driver framework for the new pds_core device
driver and its family of devices. This does the very basics of
registering for the new PF PCI device 1dd8:100c, setting up debugfs
entries, and registering with devlink.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ICMPv6 error packets are not sent to the anycast destinations and this
prevents things like traceroute from working. So create a setting similar
to ECHO when dealing with Anycast sources (icmpv6_echo_ignore_anycast).
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20230419013238.2691167-1-maheshb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Create a new devlink health reporter for representor interface, which
reports the values of representor vnic diagnostic counters when diagnosed.
This patch will allow admins to monitor VF diagnostic counters through
the representor-interface vnic reporter.
Example of usage:
$ devlink health diagnose pci/0000:08:00.0/65537 reporter vnic
vNIC env counters:
total_error_queues: 0 send_queue_priority_update_flow: 0
comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0
invalid_command: 0 quota_exceeded_command: 0
nic_receive_steering_discard: 0
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Create a vnic devlink health reporter for PFs/VFs interfaces.
The reporter's diagnose callback displays the values of vNIC/vport
transport debug counters of PFs/VFs, as follows:
$ devlink health diagnose pci/0000:08:00.0 reporter vnic
vNIC env counters:
total_error_queues: 0 send_queue_priority_update_flow: 0
comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0
invalid_command: 0 quota_exceeded_command: 0
nic_receive_steering_discard: 0
Moreover, add documentation on the reporter functionality and the
counters description.
While at it, expose the vNIC counters diagnose function to be used by
the downstream patch, which will reveal the counters for representor
interfaces.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Adjacent changes:
net/mptcp/protocol.h
63740448a32e ("mptcp: fix accept vs worker race")
2a6a870e44dd ("mptcp: stops worker on unaccepted sockets at listener close")
ddb1a072f858 ("mptcp: move first subflow allocation at mpc access time")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull Rust fixes from Miguel Ojeda:
"Most of these are straightforward.
The last one is more complex, but it only touches Rust + GCC builds
which are for the moment best-effort.
- Code: Missing 'extern "C"' fix.
- Scripts: 'is_rust_module.sh' and 'generate_rust_analyzer.py' fixes.
- A couple trivial fixes
- Build: Rust + GCC build fix and 'grep' warning fix"
* tag 'rust-fixes-6.3' of https://github.com/Rust-for-Linux/linux:
rust: allow to use INIT_STACK_ALL_ZERO
rust: fix regexp in scripts/is_rust_module.sh
rust: build: Fix grep warning
scripts: generate_rust_analyzer: Handle sub-modules with no Makefile
rust: kernel: Mark rust_fmt_argument as extern "C"
rust: sort uml documentation arch support table
rust: str: fix requierments->requirements typo
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and bpf.
There are a few fixes for new code bugs, including the Mellanox one
noted in the last networking pull. No known regressions outstanding.
Current release - regressions:
- sched: clear actions pointer in miss cookie init fail
- mptcp: fix accept vs worker race
- bpf: fix bpf_arch_text_poke() with new_addr == NULL on s390
- eth: bnxt_en: fix a possible NULL pointer dereference in unload
path
- eth: veth: take into account peer device for
NETDEV_XDP_ACT_NDO_XMIT xdp_features flag
Current release - new code bugs:
- eth: revert "net/mlx5: Enable management PF initialization"
Previous releases - regressions:
- netfilter: fix recent physdev match breakage
- bpf: fix incorrect verifier pruning due to missing register
precision taints
- eth: virtio_net: fix overflow inside xdp_linearize_page()
- eth: cxgb4: fix use after free bugs caused by circular dependency
problem
- eth: mlxsw: pci: fix possible crash during initialization
Previous releases - always broken:
- sched: sch_qfq: prevent slab-out-of-bounds in qfq_activate_agg
- netfilter: validate catch-all set elements
- bridge: don't notify FDB entries with "master dynamic"
- eth: bonding: fix memory leak when changing bond type to ethernet
- eth: i40e: fix accessing vsi->active_filters without holding lock
Misc:
- Mat is back as MPTCP co-maintainer"
* tag 'net-6.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (33 commits)
net: bridge: switchdev: don't notify FDB entries with "master dynamic"
Revert "net/mlx5: Enable management PF initialization"
MAINTAINERS: Resume MPTCP co-maintainer role
mailmap: add entries for Mat Martineau
e1000e: Disable TSO on i219-LM card to increase speed
bnxt_en: fix free-runnig PHC mode
net: dsa: microchip: ksz8795: Correctly handle huge frame configuration
bpf: Fix incorrect verifier pruning due to missing register precision taints
hamradio: drop ISA_DMA_API dependency
mlxsw: pci: Fix possible crash during initialization
mptcp: fix accept vs worker race
mptcp: stops worker on unaccepted sockets at listener close
net: rpl: fix rpl header size calculation
net: vmxnet3: Fix NULL pointer dereference in vmxnet3_rq_rx_complete()
bonding: Fix memory leak when changing bond type to Ethernet
veth: take into account peer device for NETDEV_XDP_ACT_NDO_XMIT xdp_features flag
mlxfw: fix null-ptr-deref in mlxfw_mfa2_tlv_next()
bnxt_en: Fix a possible NULL pointer dereference in unload path
bnxt_en: Do not initialize PTP on older P3/P4 chips
netfilter: nf_tables: tighten netlink attribute requirements for catch-all elements
...
|
|
ath.git patches for v6.4. Major changes:
wcn36xx
* support for pronto v3 hardware
ath11k
* PCIe DeviceTree bindings
* WCN6750: enable SAR support
ath10k
* convert DeviceTree bindings to YAML
|
|
To enable kernel consumers of TLS to request a TLS handshake, add
support to net/handshake/ to request a handshake upcall.
This patch also acts as a template for adding handshake upcall
support for other kernel transport layer security providers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a kernel consumer needs a transport layer security session, it
first needs a handshake to negotiate and establish a session. This
negotiation can be done in user space via one of the several
existing library implementations, or it can be done in the kernel.
No in-kernel handshake implementations yet exist. In their absence,
we add a netlink service that can:
a. Notify a user space daemon that a handshake is needed.
b. Once notified, the daemon calls the kernel back via this
netlink service to get the handshake parameters, including an
open socket on which to establish the session.
c. Once the handshake is complete, the daemon reports the
session status and other information via a second netlink
operation. This operation marks that it is safe for the
kernel to use the open socket and the security session
established there.
The notification service uses a multicast group. Each handshake
mechanism (eg, tlshd) adopts its own group number so that the
handshake services are completely independent of one another. The
kernel can then tell via netlink_has_listeners() whether a handshake
service is active and prepared to handle a handshake request.
A new netlink operation, ACCEPT, acts like accept(2) in that it
instantiates a file descriptor in the user space daemon's fd table.
If this operation is successful, the reply carries the fd number,
which can be treated as an open and ready file descriptor.
While user space is performing the handshake, the kernel keeps its
muddy paws off the open socket. A second new netlink operation,
DONE, indicates that the user space daemon is finished with the
socket and it is safe for the kernel to use again. The operation
also indicates whether a session was established successfully.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A JSON pointer reference (the part after the "#") must start with a "/".
Conversely, references to the entire document must not have a trailing "/"
and should be just a "#". The existing jsonschema package allows these,
but coming changes make allowed "$ref" URIs stricter and throw errors on
these references.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230418150628.1528480-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the ath10k bindings to YAML.
Dropped properties that are absent at the current state of mainline:
- qcom,msi_addr
- qcom,msi_base
Somewhat based on the ath11k bindings.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230406-topic-ath10k_bindings-v4-1-9f67a6bb0d56@linaro.org
|
|
Network LEDs can exist in both the MAC and the PHY. Naming is
difficult because the netdev name is neither stable or unique, do to
commands like ip link set name eth42 dev eth0, and network
namesspaces.
Give some example names where the MAC and the PHY have unique names
based on device tree nodes, or PCI bus addresses.
Since the LED can be used for anything which Linux supports for LEDs,
avoid using names like activity or link, rather describe the location
on the RJ-45, of what the RJ-45 is expected to be used for, WAN/LAN
etc.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Document support for LEDs node in phy and add an example for it.
PHY LED will have to match led pattern and should be treated as a
generic led.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add LEDs definition example for qca8k Switch Family to describe how they
should be defined for a correct usage.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Document support for LEDs node in ethernet-controller.
Ethernet Controller may support different LEDs that can be configured
for different operation like blinking on traffic event or port link.
Also add some Documentation to describe the difference of these nodes
compared to PHY LEDs, since ethernet-controller LEDs are controllable
by the ethernet controller regs and the possible intergated PHY doesn't
have control on them.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
LoongArch maintains cache coherency in hardware, but when paired with
LS7A chipsets the WUC attribute (Weak-ordered UnCached, which is similar
to WriteCombine) is out of the scope of cache coherency machanism for
PCIe devices (this is a PCIe protocol violation, which may be fixed in
newer chipsets).
This means WUC can only used for write-only memory regions now, so this
option is disabled by default, making WUC silently fallback to SUC for
ioremap(). You can enable this option if the kernel is ensured to run on
hardware without this bug.
Kernel parameter writecombine=on/off can be used to override the Kconfig
option.
Cc: stable@vger.kernel.org
Suggested-by: WANG Xuerui <kernel@xen0n.name>
Reviewed-by: WANG Xuerui <kernel@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add documentation to describe StarFive dwmac driver(GMAC).
Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
According to:
stmmac_platform.c: stmmac_probe_config_dt
stmmac_main.c: stmmac_dvr_probe
dwmac controller may require one (stmmaceth) or two (stmmaceth+ahb)
reset signals, and the maxItems of resets/reset-names is going to be 2.
The gmac of Starfive Jh7110 SOC must have two resets.
it uses snps,dwmac-5.20 IP.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add dwmac-5.20 IP version to snps.dwmac.yaml
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit e523af4ee560 ("net/ice: Add support for enable_iwarp and enable_roce
devlink param") added support for the enable_roce and enable_iwarp
parameters in the ice driver. It didn't document these parameters in the
ice devlink documentation file. Add this documentation, including a note
about the mutual exclusion between the two modes.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230414162614.571861-1-jacob.e.keller@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
LEDs can be in low-active mode, driver already supports it, but
documentation is missing. Add documentation for the dt property.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Drop debug info from purgatory objects again
- Document that kernel.org provides prebuilt LLVM toolchains
- Give up handling untracked files for source package builds
- Avoid creating corrupted cpio when KBUILD_BUILD_TIMESTAMP is given
with a pre-epoch data.
- Change panic_show_mem() to a macro to handle variable-length argument
- Compress tarballs on-the-fly again
* tag 'kbuild-fixes-v6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: do not create intermediate *.tar for tar packages
kbuild: do not create intermediate *.tar for source tarballs
kbuild: merge cmd_archive_linux and cmd_archive_perf
init/initramfs: Fix argument forwarding to panic() in panic_show_mem()
initramfs: Check negative timestamp to prevent broken cpio archive
kbuild: give up untracked files for source package builds
Documentation/llvm: Add a note about prebuilt kernel.org toolchains
purgatory: fix disabling debug info
|
|
A prior patch removed KF_KPTR_GET from the kernel. Now that it's no
longer accessible to kfunc authors, this patch removes it from the BPF
kfunc documentation.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230416084928.326135-4-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Recent patches to mlx5 mentioned a regression when moving from
driver local page pool to only using the generic page pool code.
Page pool has two recycling paths (1) direct one, which runs in
safe NAPI context (basically consumer context, so producing
can be lockless); and (2) via a ptr_ring, which takes a spin
lock because the freeing can happen from any CPU; producer
and consumer may run concurrently.
Since the page pool code was added, Eric introduced a revised version
of deferred skb freeing. TCP skbs are now usually returned to the CPU
which allocated them, and freed in softirq context. This places the
freeing (producing of pages back to the pool) enticingly close to
the allocation (consumer).
If we can prove that we're freeing in the same softirq context in which
the consumer NAPI will run - lockless use of the cache is perfectly fine,
no need for the lock.
Let drivers link the page pool to a NAPI instance. If the NAPI instance
is scheduled on the same CPU on which we're freeing - place the pages
in the direct cache.
With that and patched bnxt (XDP enabled to engage the page pool, sigh,
bnxt really needs page pool work :() I see a 2.6% perf boost with
a TCP stream test (app on a different physical core than softirq).
The CPU use of relevant functions decreases as expected:
page_pool_refill_alloc_cache 1.17% -> 0%
_raw_spin_lock 2.41% -> 0.98%
Only consider lockless path to be safe when NAPI is scheduled
- in practice this should cover majority if not all of steady state
workloads. It's usually the NAPI kicking in that causes the skb flush.
The main case we'll miss out on is when application runs on the same
CPU as NAPI. In that case we don't use the deferred skb free path.
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for a missing fence when generating the NOMMU sigreturn
trampoline
- A set of fixes for early DTB handling of reserved memory nodes
* tag 'riscv-for-linus-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: No need to relocate the dtb as it lies in the fixmap region
riscv: Do not set initial_boot_params to the linear address of the dtb
riscv: Move early dtb mapping into the fixmap region
riscv: add icache flush for nommu sigreturn trampoline
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes.
At this time, quite a few fixes for the old PCI drivers are found.
Although they are not regression fixes, I took these as they are
materials for stable kernels.
In addition, a couple of regression fixes and another couple of
HD-audio quirks are included"
* tag 'sound-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/hdmi: disable KAE for Intel DG2
ALSA: hda/realtek: Add quirks for Lenovo Z13/Z16 Gen2
ALSA: hda: patch_realtek: add quirk for Asus N7601ZM
ALSA: firewire-tascam: add missing unwind goto in snd_tscm_stream_start_duplex()
ALSA: emu10k1: don't create old pass-through playback device on Audigy
ALSA: emu10k1: fix capture interrupt handler unlinking
ALSA: hda/sigmatel: fix S/PDIF out on Intel D*45* motherboards
ALSA: hda/sigmatel: add pin overrides for Intel DP45SG motherboard
ALSA: i2c/cs8427: fix iec958 mixer control deactivation
|
|
riscv establishes 2 virtual mappings:
- early_pg_dir maps the kernel which allows to discover the system
memory
- swapper_pg_dir installs the final mapping (linear mapping included)
We used to map the dtb in early_pg_dir using DTB_EARLY_BASE_VA, and this
mapping was not carried over in swapper_pg_dir. It happens that
early_init_fdt_scan_reserved_mem() must be called before swapper_pg_dir is
setup otherwise we could allocate reserved memory defined in the dtb.
And this function initializes reserved_mem variable with addresses that
lie in the early_pg_dir dtb mapping: when those addresses are reused
with swapper_pg_dir, this mapping does not exist and then we trap.
The previous "fix" was incorrect as early_init_fdt_scan_reserved_mem()
must be called before swapper_pg_dir is set up otherwise we could
allocate in reserved memory defined in the dtb.
So move the dtb mapping in the fixmap region which is established in
early_pg_dir and handed over to swapper_pg_dir.
Fixes: 922b0375fc93 ("riscv: Fix memblock reservation for device tree blob")
Fixes: 8f3a2b4a96dc ("RISC-V: Move DT mapping outof fixmap")
Fixes: 50e63dd8ed92 ("riscv: fix reserved memory setup")
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/all/f8e67f82-103d-156c-deb0-d6d6e2756f5e@microchip.com/
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230329081932.79831-2-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
====================
pull-request: bpf-next 2023-04-13
We've added 260 non-merge commits during the last 36 day(s) which contain
a total of 356 files changed, 21786 insertions(+), 11275 deletions(-).
The main changes are:
1) Rework BPF verifier log behavior and implement it as a rotating log
by default with the option to retain old-style fixed log behavior,
from Andrii Nakryiko.
2) Adds support for using {FOU,GUE} encap with an ipip device operating
in collect_md mode and add a set of BPF kfuncs for controlling encap
params, from Christian Ehrig.
3) Allow BPF programs to detect at load time whether a particular kfunc
exists or not, and also add support for this in light skeleton,
from Alexei Starovoitov.
4) Optimize hashmap lookups when key size is multiple of 4,
from Anton Protopopov.
5) Enable RCU semantics for task BPF kptrs and allow referenced kptr
tasks to be stored in BPF maps, from David Vernet.
6) Add support for stashing local BPF kptr into a map value via
bpf_kptr_xchg(). This is useful e.g. for rbtree node creation
for new cgroups, from Dave Marchevsky.
7) Fix BTF handling of is_int_ptr to skip modifiers to work around
tracing issues where a program cannot be attached, from Feng Zhou.
8) Migrate a big portion of test_verifier unit tests over to
test_progs -a verifier_* via inline asm to ease {read,debug}ability,
from Eduard Zingerman.
9) Several updates to the instruction-set.rst documentation
which is subject to future IETF standardization
(https://lwn.net/Articles/926882/), from Dave Thaler.
10) Fix BPF verifier in the __reg_bound_offset's 64->32 tnum sub-register
known bits information propagation, from Daniel Borkmann.
11) Add skb bitfield compaction work related to BPF with the overall goal
to make more of the sk_buff bits optional, from Jakub Kicinski.
12) BPF selftest cleanups for build id extraction which stand on its own
from the upcoming integration work of build id into struct file object,
from Jiri Olsa.
13) Add fixes and optimizations for xsk descriptor validation and several
selftest improvements for xsk sockets, from Kal Conley.
14) Add BPF links for struct_ops and enable switching implementations
of BPF TCP cong-ctls under a given name by replacing backing
struct_ops map, from Kui-Feng Lee.
15) Remove a misleading BPF verifier env->bypass_spec_v1 check on variable
offset stack read as earlier Spectre checks cover this,
from Luis Gerhorst.
16) Fix issues in copy_from_user_nofault() for BPF and other tracers
to resemble copy_from_user_nmi() from safety PoV, from Florian Lehner
and Alexei Starovoitov.
17) Add --json-summary option to test_progs in order for CI tooling to
ease parsing of test results, from Manu Bretelle.
18) Batch of improvements and refactoring to prep for upcoming
bpf_local_storage conversion to bpf_mem_cache_{alloc,free} allocator,
from Martin KaFai Lau.
19) Improve bpftool's visual program dump which produces the control
flow graph in a DOT format by adding C source inline annotations,
from Quentin Monnet.
20) Fix attaching fentry/fexit/fmod_ret/lsm to modules by extracting
the module name from BTF of the target and searching kallsyms of
the correct module, from Viktor Malik.
21) Improve BPF verifier handling of '<const> <cond> <non_const>'
to better detect whether in particular jmp32 branches are taken,
from Yonghong Song.
22) Allow BPF TCP cong-ctls to write app_limited of struct tcp_sock.
A built-in cc or one from a kernel module is already able to write
to app_limited, from Yixin Shen.
Conflicts:
Documentation/bpf/bpf_devel_QA.rst
b7abcd9c656b ("bpf, doc: Link to submitting-patches.rst for general patch submission info")
0f10f647f455 ("bpf, docs: Use internal linking for link to netdev subsystem doc")
https://lore.kernel.org/all/20230307095812.236eb1be@canb.auug.org.au/
include/net/ip_tunnels.h
bc9d003dc48c3 ("ip_tunnel: Preserve pointer const in ip_tunnel_info_opts")
ac931d4cdec3d ("ipip,ip_tunnel,sit: Add FOU support for externally controlled ipip devices")
https://lore.kernel.org/all/20230413161235.4093777-1-broonie@kernel.org/
net/bpf/test_run.c
e5995bc7e2ba ("bpf, test_run: fix crashes due to XDP frame overwriting/corruption")
294635a8165a ("bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES")
https://lore.kernel.org/all/20230320102619.05b80a98@canb.auug.org.au/
====================
Link: https://lore.kernel.org/r/20230413191525.7295-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Conflicts:
tools/testing/selftests/net/config
62199e3f1658 ("selftests: net: Add VXLAN MDB test")
3a0385be133e ("selftests: add the missing CONFIG_IP_SCTP in net config")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, and bluetooth.
Not all that quiet given spring celebrations, but "current" fixes are
thinning out, which is encouraging. One outstanding regression in the
mlx5 driver when using old FW, not blocking but we're pushing for a
fix.
Current release - new code bugs:
- eth: enetc: workaround for unresponsive pMAC after receiving
express traffic
Previous releases - regressions:
- rtnetlink: restore RTM_NEW/DELLINK notification behavior, keep the
pid/seq fields 0 for backward compatibility
Previous releases - always broken:
- sctp: fix a potential overflow in sctp_ifwdtsn_skip
- mptcp:
- use mptcp_schedule_work instead of open-coding it and make the
worker check stricter, to avoid scheduling work on closed
sockets
- fix NULL pointer dereference on fastopen early fallback
- skbuff: fix memory corruption due to a race between skb coalescing
and releasing clones confusing page_pool reference counting
- bonding: fix neighbor solicitation validation on backup slaves
- bpf: tcp: use sock_gen_put instead of sock_put in bpf_iter_tcp
- bpf: arm64: fixed a BTI error on returning to patched function
- openvswitch: fix race on port output leading to inf loop
- sfp: initialize sfp->i2c_block_size at sfp allocation to avoid
returning a different errno than expected
- phy: nxp-c45-tja11xx: unregister PTP, purge queues on remove
- Bluetooth: fix printing errors if LE Connection times out
- Bluetooth: assorted UaF, deadlock and data race fixes
- eth: macb: fix memory corruption in extended buffer descriptor mode
Misc:
- adjust the XDP Rx flow hash API to also include the protocol layers
over which the hash was computed"
* tag 'net-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
selftests/bpf: Adjust bpf_xdp_metadata_rx_hash for new arg
mlx4: bpf_xdp_metadata_rx_hash add xdp rss hash type
veth: bpf_xdp_metadata_rx_hash add xdp rss hash type
mlx5: bpf_xdp_metadata_rx_hash add xdp rss hash type
xdp: rss hash types representation
selftests/bpf: xdp_hw_metadata remove bpf_printk and add counters
skbuff: Fix a race between coalescing and releasing SKBs
net: macb: fix a memory corruption in extended buffer descriptor mode
selftests: add the missing CONFIG_IP_SCTP in net config
udp6: fix potential access to stale information
selftests: openvswitch: adjust datapath NL message declaration
selftests: mptcp: userspace pm: uniform verify events
mptcp: fix NULL pointer dereference on fastopen early fallback
mptcp: stricter state check in mptcp_worker
mptcp: use mptcp_schedule_work instead of open-coding it
net: enetc: workaround for unresponsive pMAC after receiving express traffic
sctp: fix a potential overflow in sctp_ifwdtsn_skip
net: qrtr: Fix an uninit variable access bug in qrtr_tx_resume()
rtnetlink: Restore RTM_NEW/DELLINK notification behavior
net: ti/cpsw: Add explicit platform_device.h and of_platform.h includes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix interaction between fw_devlink and DT overlays causing devices to
not be probed
- Fix the compatible string for loongson,cpu-interrupt-controller
* tag 'devicetree-fixes-for-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
treewide: Fix probing of devices in DT overlays
dt-bindings: interrupt-controller: loongarch: Fix mismatched compatible
|
|
The sample code talks about single-queue devices and uses locks.
Update it to something resembling more modern code.
Make sure we mention use of READ_ONCE() / WRITE_ONCE().
Change the comment which talked about consumer on the xmit side.
AFAIU xmit is the producer and completions are a consumer.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The sc8280xp has a new version of the ETHQOS hardware in it, EMAC v3.
Add a compatible for this.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Convert Qualcomm ETHQOS Ethernet devicetree binding to YAML.
In doing so add a new property for iommus since newer platforms support
using one, and without such make dtbs_check fails on them.
While at it, also update the MAINTAINERS file to point to the yaml
version of the bindings.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
[halaney: Remove duplicated properties, add MAINTAINERS and iommus]
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add Qualcomm Ethernet ETHQOS compatible checks
in snps,dwmac YAML binding document.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As commit fc191af1bb0d ("net: stmmac: platform: Fix misleading
interrupt error msg") noted, not every stmmac based platform
makes use of the 'eth_wake_irq' or 'eth_lpi' interrupts.
So, update the 'interrupt-names' inside 'snps,dwmac' YAML
bindings to reflect the same.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
