diff options
Diffstat (limited to 'tools/testing/selftests/net/forwarding/min_max_mtu.sh')
| -rwxr-xr-x | tools/testing/selftests/net/forwarding/min_max_mtu.sh | 283 |
1 files changed, 283 insertions, 0 deletions
diff --git a/tools/testing/selftests/net/forwarding/min_max_mtu.sh b/tools/testing/selftests/net/forwarding/min_max_mtu.sh new file mode 100755 index 000000000000..97bb8b221bed --- /dev/null +++ b/tools/testing/selftests/net/forwarding/min_max_mtu.sh @@ -0,0 +1,283 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# +--------------------+ +# | H1 | +# | | +# | $h1.10 + | +# | 192.0.2.2/24 | | +# | 2001:db8:1::2/64 | | +# | | | +# | $h1 + | +# | | | +# +------------------|-+ +# | +# +------------------|-+ +# | SW | | +# | $swp1 + | +# | | | +# | $swp1.10 + | +# | 192.0.2.1/24 | +# | 2001:db8:1::1/64 | +# | | +# +--------------------+ + +ALL_TESTS=" + ping_ipv4 + ping_ipv6 + max_mtu_config_test + max_mtu_traffic_test + min_mtu_config_test + min_mtu_traffic_test +" + +NUM_NETIFS=2 +source lib.sh + +h1_create() +{ + simple_if_init $h1 + vlan_create $h1 10 v$h1 192.0.2.2/24 2001:db8:1::2/64 +} + +h1_destroy() +{ + vlan_destroy $h1 10 192.0.2.2/24 2001:db8:1::2/64 + simple_if_fini $h1 +} + +switch_create() +{ + ip li set dev $swp1 up + vlan_create $swp1 10 "" 192.0.2.1/24 2001:db8:1::1/64 +} + +switch_destroy() +{ + ip li set dev $swp1 down + vlan_destroy $swp1 10 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + vrf_prepare + + h1_create + + switch_create + + forwarding_enable +} + +cleanup() +{ + pre_cleanup + + forwarding_restore + + switch_destroy + + h1_destroy + + vrf_cleanup +} + +ping_ipv4() +{ + ping_test $h1.10 192.0.2.1 +} + +ping_ipv6() +{ + ping6_test $h1.10 2001:db8:1::1 +} + +min_max_mtu_get_if() +{ + local dev=$1; shift + local min_max=$1; shift + + ip -d -j link show $dev | jq ".[].$min_max" +} + +ensure_compatible_min_max_mtu() +{ + local min_max=$1; shift + + local mtu=$(min_max_mtu_get_if ${NETIFS[p1]} $min_max) + local i + + for ((i = 2; i <= NUM_NETIFS; ++i)); do + local current_mtu=$(min_max_mtu_get_if ${NETIFS[p$i]} $min_max) + + if [ $current_mtu -ne $mtu ]; then + return 1 + fi + done +} + +mtu_set_if() +{ + local dev=$1; shift + local mtu=$1; shift + local should_fail=${1:-0}; shift + + mtu_set $dev $mtu 2>/dev/null + check_err_fail $should_fail $? "Set MTU $mtu for $dev" +} + +mtu_set_all_if() +{ + local mtu=$1; shift + local i + + for ((i = 1; i <= NUM_NETIFS; ++i)); do + mtu_set_if ${NETIFS[p$i]} $mtu + mtu_set_if ${NETIFS[p$i]}.10 $mtu + done +} + +mtu_restore_all_if() +{ + local i + + for ((i = 1; i <= NUM_NETIFS; ++i)); do + mtu_restore ${NETIFS[p$i]}.10 + mtu_restore ${NETIFS[p$i]} + done +} + +mtu_test_ping4() +{ + local mtu=$1; shift + local should_fail=$1; shift + + # Ping adds 8 bytes for ICMP header and 20 bytes for IP header + local ping_headers_len=$((20 + 8)) + local pkt_size=$((mtu - ping_headers_len)) + + ping_do $h1.10 192.0.2.1 "-s $pkt_size -M do" + check_err_fail $should_fail $? "Ping, packet size: $pkt_size" +} + +mtu_test_ping6() +{ + local mtu=$1; shift + local should_fail=$1; shift + + # Ping adds 8 bytes for ICMP header and 40 bytes for IPv6 header + local ping6_headers_len=$((40 + 8)) + local pkt_size=$((mtu - ping6_headers_len)) + + ping6_do $h1.10 2001:db8:1::1 "-s $pkt_size -M do" + check_err_fail $should_fail $? "Ping6, packet size: $pkt_size" +} + +max_mtu_config_test() +{ + local i + + RET=0 + + for ((i = 1; i <= NUM_NETIFS; ++i)); do + local dev=${NETIFS[p$i]} + local max_mtu=$(min_max_mtu_get_if $dev "max_mtu") + local should_fail + + should_fail=0 + mtu_set_if $dev $max_mtu $should_fail + mtu_restore $dev + + should_fail=1 + mtu_set_if $dev $((max_mtu + 1)) $should_fail + mtu_restore $dev + done + + log_test "Test maximum MTU configuration" +} + +max_mtu_traffic_test() +{ + local should_fail + local max_mtu + + RET=0 + + if ! ensure_compatible_min_max_mtu "max_mtu"; then + log_test_xfail "Topology has incompatible maximum MTU values" + return + fi + + max_mtu=$(min_max_mtu_get_if ${NETIFS[p1]} "max_mtu") + + should_fail=0 + mtu_set_all_if $max_mtu + mtu_test_ping4 $max_mtu $should_fail + mtu_test_ping6 $max_mtu $should_fail + mtu_restore_all_if + + should_fail=1 + mtu_set_all_if $((max_mtu - 1)) + mtu_test_ping4 $max_mtu $should_fail + mtu_test_ping6 $max_mtu $should_fail + mtu_restore_all_if + + log_test "Test traffic, packet size is maximum MTU" +} + +min_mtu_config_test() +{ + local i + + RET=0 + + for ((i = 1; i <= NUM_NETIFS; ++i)); do + local dev=${NETIFS[p$i]} + local min_mtu=$(min_max_mtu_get_if $dev "min_mtu") + local should_fail + + should_fail=0 + mtu_set_if $dev $min_mtu $should_fail + mtu_restore $dev + + should_fail=1 + mtu_set_if $dev $((min_mtu - 1)) $should_fail + mtu_restore $dev + done + + log_test "Test minimum MTU configuration" +} + +min_mtu_traffic_test() +{ + local should_fail=0 + local min_mtu + + RET=0 + + if ! ensure_compatible_min_max_mtu "min_mtu"; then + log_test_xfail "Topology has incompatible minimum MTU values" + return + fi + + min_mtu=$(min_max_mtu_get_if ${NETIFS[p1]} "min_mtu") + mtu_set_all_if $min_mtu + mtu_test_ping4 $min_mtu $should_fail + # Do not test minimum MTU with IPv6, as IPv6 requires higher MTU. + + mtu_restore_all_if + + log_test "Test traffic, packet size is minimum MTU" +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS |