diff options
Diffstat (limited to 'tools/testing/ktest/ktest.pl')
| -rwxr-xr-x | tools/testing/ktest/ktest.pl | 682 |
1 files changed, 492 insertions, 190 deletions
diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 8b4c2535b266..62a134dc421a 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -18,40 +18,50 @@ $| = 1; my %opt; my %repeat_tests; my %repeats; -my %default; #default opts -$default{"NUM_TESTS"} = 1; -$default{"REBOOT_TYPE"} = "grub"; -$default{"TEST_TYPE"} = "test"; -$default{"BUILD_TYPE"} = "randconfig"; -$default{"MAKE_CMD"} = "make"; -$default{"TIMEOUT"} = 120; -$default{"TMP_DIR"} = "/tmp/ktest/\${MACHINE}"; -$default{"SLEEP_TIME"} = 60; # sleep time between tests -$default{"BUILD_NOCLEAN"} = 0; -$default{"REBOOT_ON_ERROR"} = 0; -$default{"POWEROFF_ON_ERROR"} = 0; -$default{"REBOOT_ON_SUCCESS"} = 1; -$default{"POWEROFF_ON_SUCCESS"} = 0; -$default{"BUILD_OPTIONS"} = ""; -$default{"BISECT_SLEEP_TIME"} = 60; # sleep time between bisects -$default{"PATCHCHECK_SLEEP_TIME"} = 60; # sleep time between patch checks -$default{"CLEAR_LOG"} = 0; -$default{"BISECT_MANUAL"} = 0; -$default{"BISECT_SKIP"} = 1; -$default{"SUCCESS_LINE"} = "login:"; -$default{"DETECT_TRIPLE_FAULT"} = 1; -$default{"NO_INSTALL"} = 0; -$default{"BOOTED_TIMEOUT"} = 1; -$default{"DIE_ON_FAILURE"} = 1; -$default{"SSH_EXEC"} = "ssh \$SSH_USER\@\$MACHINE \$SSH_COMMAND"; -$default{"SCP_TO_TARGET"} = "scp \$SRC_FILE \$SSH_USER\@\$MACHINE:\$DST_FILE"; -$default{"REBOOT"} = "ssh \$SSH_USER\@\$MACHINE reboot"; -$default{"STOP_AFTER_SUCCESS"} = 10; -$default{"STOP_AFTER_FAILURE"} = 60; -$default{"STOP_TEST_AFTER"} = 600; -$default{"LOCALVERSION"} = "-test"; +my %default = ( + "NUM_TESTS" => 1, + "TEST_TYPE" => "build", + "BUILD_TYPE" => "randconfig", + "MAKE_CMD" => "make", + "TIMEOUT" => 120, + "TMP_DIR" => "/tmp/ktest/\${MACHINE}", + "SLEEP_TIME" => 60, # sleep time between tests + "BUILD_NOCLEAN" => 0, + "REBOOT_ON_ERROR" => 0, + "POWEROFF_ON_ERROR" => 0, + "REBOOT_ON_SUCCESS" => 1, + "POWEROFF_ON_SUCCESS" => 0, + "BUILD_OPTIONS" => "", + "BISECT_SLEEP_TIME" => 60, # sleep time between bisects + "PATCHCHECK_SLEEP_TIME" => 60, # sleep time between patch checks + "CLEAR_LOG" => 0, + "BISECT_MANUAL" => 0, + "BISECT_SKIP" => 1, + "SUCCESS_LINE" => "login:", + "DETECT_TRIPLE_FAULT" => 1, + "NO_INSTALL" => 0, + "BOOTED_TIMEOUT" => 1, + "DIE_ON_FAILURE" => 1, + "SSH_EXEC" => "ssh \$SSH_USER\@\$MACHINE \$SSH_COMMAND", + "SCP_TO_TARGET" => "scp \$SRC_FILE \$SSH_USER\@\$MACHINE:\$DST_FILE", + "REBOOT" => "ssh \$SSH_USER\@\$MACHINE reboot", + "STOP_AFTER_SUCCESS" => 10, + "STOP_AFTER_FAILURE" => 60, + "STOP_TEST_AFTER" => 600, + +# required, and we will ask users if they don't have them but we keep the default +# value something that is common. + "REBOOT_TYPE" => "grub", + "LOCALVERSION" => "-test", + "SSH_USER" => "root", + "BUILD_TARGET" => "arch/x86/boot/bzImage", + "TARGET_IMAGE" => "/boot/vmlinuz-test", + + "LOG_FILE" => undef, + "IGNORE_UNUSED" => 0, +); my $ktest_config; my $version; @@ -73,6 +83,8 @@ my $reboot_script; my $power_cycle; my $reboot; my $reboot_on_error; +my $switch_to_good; +my $switch_to_test; my $poweroff_on_error; my $die_on_failure; my $powercycle_after_reboot; @@ -92,17 +104,24 @@ my $start_minconfig; my $start_minconfig_defined; my $output_minconfig; my $ignore_config; +my $ignore_errors; my $addconfig; my $in_bisect = 0; -my $bisect_bad = ""; +my $bisect_bad_commit = ""; my $reverse_bisect; my $bisect_manual; my $bisect_skip; my $config_bisect_good; +my $bisect_ret_good; +my $bisect_ret_bad; +my $bisect_ret_skip; +my $bisect_ret_abort; +my $bisect_ret_default; my $in_patchcheck = 0; my $run_test; my $redirect; my $buildlog; +my $testlog; my $dmesg; my $monitor_fp; my $monitor_pid; @@ -112,6 +131,7 @@ my $bisect_sleep_time; my $patchcheck_sleep_time; my $ignore_warnings; my $store_failures; +my $store_successes; my $test_name; my $timeout; my $booted_timeout; @@ -124,10 +144,34 @@ my $stop_after_failure; my $stop_test_after; my $build_target; my $target_image; +my $checkout; my $localversion; my $iteration = 0; my $successes = 0; +my $bisect_good; +my $bisect_bad; +my $bisect_type; +my $bisect_start; +my $bisect_replay; +my $bisect_files; +my $bisect_reverse; +my $bisect_check; + +my $config_bisect; +my $config_bisect_type; + +my $patchcheck_type; +my $patchcheck_start; +my $patchcheck_end; + +# set when a test is something other that just building or install +# which would require more options. +my $buildonly = 1; + +# set when creating a new config +my $newconfig = 0; + my %entered_configs; my %config_help; my %variable; @@ -136,11 +180,99 @@ my %force_config; # do not force reboots on config problems my $no_reboot = 1; +my %option_map = ( + "MACHINE" => \$machine, + "SSH_USER" => \$ssh_user, + "TMP_DIR" => \$tmpdir, + "OUTPUT_DIR" => \$outputdir, + "BUILD_DIR" => \$builddir, + "TEST_TYPE" => \$test_type, + "BUILD_TYPE" => \$build_type, + "BUILD_OPTIONS" => \$build_options, + "PRE_BUILD" => \$pre_build, + "POST_BUILD" => \$post_build, + "PRE_BUILD_DIE" => \$pre_build_die, + "POST_BUILD_DIE" => \$post_build_die, + "POWER_CYCLE" => \$power_cycle, + "REBOOT" => \$reboot, + "BUILD_NOCLEAN" => \$noclean, + "MIN_CONFIG" => \$minconfig, + "OUTPUT_MIN_CONFIG" => \$output_minconfig, + "START_MIN_CONFIG" => \$start_minconfig, + "IGNORE_CONFIG" => \$ignore_config, + "TEST" => \$run_test, + "ADD_CONFIG" => \$addconfig, + "REBOOT_TYPE" => \$reboot_type, + "GRUB_MENU" => \$grub_menu, + "POST_INSTALL" => \$post_install, + "NO_INSTALL" => \$no_install, + "REBOOT_SCRIPT" => \$reboot_script, + "REBOOT_ON_ERROR" => \$reboot_on_error, + "SWITCH_TO_GOOD" => \$switch_to_good, + "SWITCH_TO_TEST" => \$switch_to_test, + "POWEROFF_ON_ERROR" => \$poweroff_on_error, + "DIE_ON_FAILURE" => \$die_on_failure, + "POWER_OFF" => \$power_off, + "POWERCYCLE_AFTER_REBOOT" => \$powercycle_after_reboot, + "POWEROFF_AFTER_HALT" => \$poweroff_after_halt, + "SLEEP_TIME" => \$sleep_time, + "BISECT_SLEEP_TIME" => \$bisect_sleep_time, + "PATCHCHECK_SLEEP_TIME" => \$patchcheck_sleep_time, + "IGNORE_WARNINGS" => \$ignore_warnings, + "IGNORE_ERRORS" => \$ignore_errors, + "BISECT_MANUAL" => \$bisect_manual, + "BISECT_SKIP" => \$bisect_skip, + "CONFIG_BISECT_GOOD" => \$config_bisect_good, + "BISECT_RET_GOOD" => \$bisect_ret_good, + "BISECT_RET_BAD" => \$bisect_ret_bad, + "BISECT_RET_SKIP" => \$bisect_ret_skip, + "BISECT_RET_ABORT" => \$bisect_ret_abort, + "BISECT_RET_DEFAULT" => \$bisect_ret_default, + "STORE_FAILURES" => \$store_failures, + "STORE_SUCCESSES" => \$store_successes, + "TEST_NAME" => \$test_name, + "TIMEOUT" => \$timeout, + "BOOTED_TIMEOUT" => \$booted_timeout, + "CONSOLE" => \$console, + "DETECT_TRIPLE_FAULT" => \$detect_triplefault, + "SUCCESS_LINE" => \$success_line, + "REBOOT_SUCCESS_LINE" => \$reboot_success_line, + "STOP_AFTER_SUCCESS" => \$stop_after_success, + "STOP_AFTER_FAILURE" => \$stop_after_failure, + "STOP_TEST_AFTER" => \$stop_test_after, + "BUILD_TARGET" => \$build_target, + "SSH_EXEC" => \$ssh_exec, + "SCP_TO_TARGET" => \$scp_to_target, + "CHECKOUT" => \$checkout, + "TARGET_IMAGE" => \$target_image, + "LOCALVERSION" => \$localversion, + + "BISECT_GOOD" => \$bisect_good, + "BISECT_BAD" => \$bisect_bad, + "BISECT_TYPE" => \$bisect_type, + "BISECT_START" => \$bisect_start, + "BISECT_REPLAY" => \$bisect_replay, + "BISECT_FILES" => \$bisect_files, + "BISECT_REVERSE" => \$bisect_reverse, + "BISECT_CHECK" => \$bisect_check, + + "CONFIG_BISECT" => \$config_bisect, + "CONFIG_BISECT_TYPE" => \$config_bisect_type, + + "PATCHCHECK_TYPE" => \$patchcheck_type, + "PATCHCHECK_START" => \$patchcheck_start, + "PATCHCHECK_END" => \$patchcheck_end, +); + +# Options may be used by other options, record them. +my %used_options; + # default variables that can be used chomp ($variable{"PWD"} = `pwd`); $config_help{"MACHINE"} = << "EOF" The machine hostname that you will test. + For build only tests, it is still needed to differentiate log files. EOF ; $config_help{"SSH_USER"} = << "EOF" @@ -150,11 +282,15 @@ EOF ; $config_help{"BUILD_DIR"} = << "EOF" The directory that contains the Linux source code (full path). + You can use \${PWD} that will be the path where ktest.pl is run, or use + \${THIS_DIR} which is assigned \${PWD} but may be changed later. EOF ; $config_help{"OUTPUT_DIR"} = << "EOF" The directory that the objects will be built (full path). (can not be same as BUILD_DIR) + You can use \${PWD} that will be the path where ktest.pl is run, or use + \${THIS_DIR} which is assigned \${PWD} but may be changed later. EOF ; $config_help{"BUILD_TARGET"} = << "EOF" @@ -162,6 +298,11 @@ $config_help{"BUILD_TARGET"} = << "EOF" (relative to OUTPUT_DIR) EOF ; +$config_help{"BUILD_OPTIONS"} = << "EOF" + Options to add to \"make\" when building. + i.e. -j20 +EOF + ; $config_help{"TARGET_IMAGE"} = << "EOF" The place to put your image on the test machine. EOF @@ -227,20 +368,36 @@ $config_help{"REBOOT_SCRIPT"} = << "EOF" EOF ; -sub read_yn { - my ($prompt) = @_; +sub read_prompt { + my ($cancel, $prompt) = @_; my $ans; for (;;) { - print "$prompt [Y/n] "; + if ($cancel) { + print "$prompt [y/n/C] "; + } else { + print "$prompt [Y/n] "; + } $ans = <STDIN>; chomp $ans; if ($ans =~ /^\s*$/) { - $ans = "y"; + if ($cancel) { + $ans = "c"; + } else { + $ans = "y"; + } } last if ($ans =~ /^y$/i || $ans =~ /^n$/i); - print "Please answer either 'y' or 'n'.\n"; + if ($cancel) { + last if ($ans =~ /^c$/i); + print "Please answer either 'y', 'n' or 'c'.\n"; + } else { + print "Please answer either 'y' or 'n'.\n"; + } + } + if ($ans =~ /^c/i) { + exit; } if ($ans !~ /^y$/i) { return 0; @@ -248,6 +405,18 @@ sub read_yn { return 1; } +sub read_yn { + my ($prompt) = @_; + + return read_prompt 0, $prompt; +} + +sub read_ync { + my ($prompt) = @_; + + return read_prompt 1, $prompt; +} + sub get_ktest_config { my ($config) = @_; my $ans; @@ -261,7 +430,7 @@ sub get_ktest_config { for (;;) { print "$config = "; - if (defined($default{$config})) { + if (defined($default{$config}) && length($default{$config})) { print "\[$default{$config}\] "; } $ans = <STDIN>; @@ -274,22 +443,37 @@ sub get_ktest_config { next; } } - $entered_configs{$config} = process_variables($ans); + $entered_configs{$config} = ${ans}; last; } } sub get_ktest_configs { get_ktest_config("MACHINE"); - get_ktest_config("SSH_USER"); get_ktest_config("BUILD_DIR"); get_ktest_config("OUTPUT_DIR"); - get_ktest_config("BUILD_TARGET"); - get_ktest_config("TARGET_IMAGE"); - get_ktest_config("POWER_CYCLE"); - get_ktest_config("CONSOLE"); + + if ($newconfig) { + get_ktest_config("BUILD_OPTIONS"); + } + + # options required for other than just building a kernel + if (!$buildonly) { + get_ktest_config("POWER_CYCLE"); + get_ktest_config("CONSOLE"); + } + + # options required for install and more + if ($buildonly != 1) { + get_ktest_config("SSH_USER"); + get_ktest_config("BUILD_TARGET"); + get_ktest_config("TARGET_IMAGE"); + } + get_ktest_config("LOCALVERSION"); + return if ($buildonly); + my $rtype = $opt{"REBOOT_TYPE"}; if (!defined($rtype)) { @@ -303,8 +487,6 @@ sub get_ktest_configs { if ($rtype eq "grub") { get_ktest_config("GRUB_MENU"); - } else { - get_ktest_config("REBOOT_SCRIPT"); } } @@ -334,6 +516,10 @@ sub process_variables { } else { # put back the origin piece. $retval = "$retval\$\{$var\}"; + # This could be an option that is used later, save + # it so we don't warn if this option is not one of + # ktests options. + $used_options{$var} = 1; } $value = $end; } @@ -348,6 +534,19 @@ sub process_variables { sub set_value { my ($lvalue, $rvalue, $override, $overrides, $name) = @_; + my $prvalue = process_variables($rvalue); + + if ($buildonly && $lvalue =~ /^TEST_TYPE(\[.*\])?$/ && $prvalue ne "build") { + # Note if a test is something other than build, then we + # will need other manditory options. + if ($prvalue ne "install") { + $buildonly = 0; + } else { + # install still limits some manditory options. + $buildonly = 2; + } + } + if (defined($opt{$lvalue})) { if (!$override || defined(${$overrides}{$lvalue})) { my $extra = ""; @@ -356,13 +555,12 @@ sub set_value { } die "$name: $.: Option $lvalue defined more than once!\n$extra"; } - ${$overrides}{$lvalue} = $rvalue; + ${$overrides}{$lvalue} = $prvalue; } if ($rvalue =~ /^\s*$/) { delete $opt{$lvalue}; } else { - $rvalue = process_variables($rvalue); - $opt{$lvalue} = $rvalue; + $opt{$lvalue} = $prvalue; } } @@ -712,6 +910,15 @@ sub __read_config { return $test_case; } +sub get_test_case { + print "What test case would you like to run?\n"; + print " (build, install or boot)\n"; + print " Other tests are available but require editing the config file\n"; + my $ans = <STDIN>; + chomp $ans; + $default{"TEST_TYPE"} = $ans; +} + sub read_config { my ($config) = @_; @@ -726,10 +933,7 @@ sub read_config { # was a test specified? if (!$test_case) { print "No test case specified.\n"; - print "What test case would you like to run?\n"; - my $ans = <STDIN>; - chomp $ans; - $default{"TEST_TYPE"} = $ans; + get_test_case; } # set any defaults @@ -739,6 +943,37 @@ sub read_config { $opt{$default} = $default{$default}; } } + + if ($opt{"IGNORE_UNUSED"} == 1) { + return; + } + + my %not_used; + + # check if there are any stragglers (typos?) + foreach my $option (keys %opt) { + my $op = $option; + # remove per test labels. + $op =~ s/\[.*\]//; + if (!exists($option_map{$op}) && + !exists($default{$op}) && + !exists($used_options{$op})) { + $not_used{$op} = 1; + } + } + + if (%not_used) { + my $s = "s are"; + $s = " is" if (keys %not_used == 1); + print "The following option$s not used; could be a typo:\n"; + foreach my $option (keys %not_used) { + print "$option\n"; + } + print "Set IGRNORE_UNUSED = 1 to have ktest ignore unused variables\n"; + if (!read_yn "Do you want to continue?") { + exit -1; + } + } } sub __eval_option { @@ -873,6 +1108,17 @@ sub reboot { } } +sub reboot_to_good { + my ($time) = @_; + + if (defined($switch_to_good)) { + run_command $switch_to_good; + return; + } + + reboot $time; +} + sub do_not_reboot { my $i = $iteration; @@ -889,7 +1135,7 @@ sub dodie { if ($reboot_on_error && !do_not_reboot) { doprint "REBOOTING\n"; - reboot; + reboot_to_good; } elsif ($poweroff_on_error && defined($power_off)) { doprint "POWERING OFF\n"; @@ -975,6 +1221,43 @@ sub wait_for_monitor { print "** Monitor flushed **\n"; } +sub save_logs { + my ($result, $basedir) = @_; + my @t = localtime; + my $date = sprintf "%04d%02d%02d%02d%02d%02d", + 1900+$t[5],$t[4],$t[3],$t[2],$t[1],$t[0]; + + my $type = $build_type; + if ($type =~ /useconfig/) { + $type = "useconfig"; + } + + my $dir = "$machine-$test_type-$type-$result-$date"; + + $dir = "$basedir/$dir"; + + if (!-d $dir) { + mkpath($dir) or + die "can't create $dir"; + } + + my %files = ( + "config" => $output_config, + "buildlog" => $buildlog, + "dmesg" => $dmesg, + "testlog" => $testlog, + ); + + while (my ($name, $source) = each(%files)) { + if (-f "$source") { + cp "$source", "$dir/$name" or + die "failed to copy $source"; + } + } + + doprint "*** Saved info to $dir ***\n"; +} + sub fail { if ($die_on_failure) { @@ -988,7 +1271,7 @@ sub fail { # no need to reboot for just building. if (!do_not_reboot) { doprint "REBOOTING\n"; - reboot $sleep_time; + reboot_to_good $sleep_time; } my $name = ""; @@ -1003,38 +1286,9 @@ sub fail { doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n"; doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n"; - return 1 if (!defined($store_failures)); - - my @t = localtime; - my $date = sprintf "%04d%02d%02d%02d%02d%02d", - 1900+$t[5],$t[4],$t[3],$t[2],$t[1],$t[0]; - - my $type = $build_type; - if ($type =~ /useconfig/) { - $type = "useconfig"; - } - - my $dir = "$machine-$test_type-$type-fail-$date"; - my $faildir = "$store_failures/$dir"; - - if (!-d $faildir) { - mkpath($faildir) or - die "can't create $faildir"; - } - if (-f "$output_config") { - cp "$output_config", "$faildir/config" or - die "failed to copy .config"; - } - if (-f $buildlog) { - cp $buildlog, "$faildir/buildlog" or - die "failed to move $buildlog"; - } - if (-f $dmesg) { - cp $dmesg, "$faildir/dmesg" or - die "failed to move $dmesg"; - } - - doprint "*** Saved info to $faildir ***\n"; + if (defined($store_failures)) { + save_logs "fail", $store_failures; + } return 1; } @@ -1170,13 +1424,16 @@ sub wait_for_input } sub reboot_to { + if (defined($switch_to_test)) { + run_command $switch_to_test; + } + if ($reboot_type eq "grub") { run_ssh "'(echo \"savedefault --default=$grub_number --once\" | grub --batch)'"; - reboot; - return; + } elsif (defined $reboot_script) { + run_command "$reboot_script"; } - - run_command "$reboot_script"; + reboot; } sub get_sha1 { @@ -1274,7 +1531,7 @@ sub monitor { } if ($full_line =~ /call trace:/i) { - if (!$bug && !$skip_call_trace) { + if (!$ignore_errors && !$bug && !$skip_call_trace) { $bug = 1; $failure_start = time; } @@ -1341,12 +1598,19 @@ sub monitor { return 1; } +sub eval_kernel_version { + my ($option) = @_; + + $option =~ s/\$KERNEL_VERSION/$version/g; + + return $option; +} + sub do_post_install { return if (!defined($post_install)); - my $cp_post_install = $post_install; - $cp_post_install =~ s/\$KERNEL_VERSION/$version/g; + my $cp_post_install = eval_kernel_version $post_install; run_command "$cp_post_install" or dodie "Failed to run post install"; } @@ -1355,7 +1619,9 @@ sub install { return if ($no_install); - run_scp "$outputdir/$build_target", "$target_image" or + my $cp_target = eval_kernel_version $target_image; + + run_scp "$outputdir/$build_target", "$cp_target" or dodie "failed to copy image"; my $install_mods = 0; @@ -1640,9 +1906,13 @@ sub success { doprint "*******************************************\n"; doprint "*******************************************\n"; + if (defined($store_successes)) { + save_logs "success", $store_successes; + } + if ($i != $opt{"NUM_TESTS"} && !do_not_reboot) { doprint "Reboot and wait $sleep_time seconds\n"; - reboot $sleep_time; + reboot_to_good $sleep_time; } } @@ -1669,7 +1939,10 @@ sub child_run_test { $poweroff_on_error = 0; $die_on_failure = 1; + $redirect = "$testlog"; run_command $run_test or $failed = 1; + undef $redirect; + exit $failed; } @@ -1744,6 +2017,43 @@ sub do_run_test { waitpid $child_pid, 0; $child_exit = $?; + if (!$bug && $in_bisect) { + if (defined($bisect_ret_good)) { + if ($child_exit == $bisect_ret_good) { + return 1; + } + } + if (defined($bisect_ret_skip)) { + if ($child_exit == $bisect_ret_skip) { + return -1; + } + } + if (defined($bisect_ret_abort)) { + if ($child_exit == $bisect_ret_abort) { + fail "test abort" and return -2; + } + } + if (defined($bisect_ret_bad)) { + if ($child_exit == $bisect_ret_skip) { + return 0; + } + } + if (defined($bisect_ret_default)) { + if ($bisect_ret_default eq "good") { + return 1; + } elsif ($bisect_ret_default eq "bad") { + return 0; + } elsif ($bisect_ret_default eq "skip") { + return -1; + } elsif ($bisect_ret_default eq "abort") { + return -2; + } else { + fail "unknown default action: $bisect_ret_default" + and return -2; + } + } + } + if ($bug || $child_exit) { return 0 if $in_bisect; fail "test failed" and return 0; @@ -1770,7 +2080,7 @@ sub run_git_bisect { if ($output =~ m/^(Bisecting: .*\(roughly \d+ steps?\))\s+\[([[:xdigit:]]+)\]/) { doprint "$1 [$2]\n"; } elsif ($output =~ m/^([[:xdigit:]]+) is the first bad commit/) { - $bisect_bad = $1; + $bisect_bad_commit = $1; doprint "Found bad commit... $1\n"; return 0; } else { @@ -1783,7 +2093,7 @@ sub run_git_bisect { sub bisect_reboot { doprint "Reboot and sleep $bisect_sleep_time seconds\n"; - reboot $bisect_sleep_time; + reboot_to_good $bisect_sleep_time; } # returns 1 on success, 0 on failure, -1 on skip @@ -1868,21 +2178,28 @@ sub run_bisect { } } +sub update_bisect_replay { + my $tmp_log = "$tmpdir/ktest_bisect_log"; + run_command "git bisect log > $tmp_log" or + die "can't create bisect log"; + return $tmp_log; +} + sub bisect { my ($i) = @_; my $result; - die "BISECT_GOOD[$i] not defined\n" if (!defined($opt{"BISECT_GOOD[$i]"})); - die "BISECT_BAD[$i] not defined\n" if (!defined($opt{"BISECT_BAD[$i]"})); - die "BISECT_TYPE[$i] not defined\n" if (!defined($opt{"BISECT_TYPE[$i]"})); + die "BISECT_GOOD[$i] not defined\n" if (!defined($bisect_good)); + die "BISECT_BAD[$i] not defined\n" if (!defined($bisect_bad)); + die "BISECT_TYPE[$i] not defined\n" if (!defined($bisect_type)); - my $good = $opt{"BISECT_GOOD[$i]"}; - my $bad = $opt{"BISECT_BAD[$i]"}; - my $type = $opt{"BISECT_TYPE[$i]"}; - my $start = $opt{"BISECT_START[$i]"}; - my $replay = $opt{"BISECT_REPLAY[$i]"}; - my $start_files = $opt{"BISECT_FILES[$i]"}; + my $good = $bisect_good; + my $bad = $bisect_bad; + my $type = $bisect_type; + my $start = $bisect_start; + my $replay = $bisect_replay; + my $start_files = $bisect_files; if (defined($start_files)) { $start_files = " -- " . $start_files; @@ -1894,8 +2211,7 @@ sub bisect { $good = get_sha1($good); $bad = get_sha1($bad); - if (defined($opt{"BISECT_REVERSE[$i]"}) && - $opt{"BISECT_REVERSE[$i]"} == 1) { + if (defined($bisect_reverse) && $bisect_reverse == 1) { doprint "Performing a reverse bisect (bad is good, good is bad!)\n"; $reverse_bisect = 1; } else { @@ -1907,8 +2223,31 @@ sub bisect { $type = "boot"; } - my $check = $opt{"BISECT_CHECK[$i]"}; - if (defined($check) && $check ne "0") { + # Check if a bisect was running + my $bisect_start_file = "$builddir/.git/BISECT_START"; + + my $check = $bisect_check; + my $do_check = defined($check) && $check ne "0"; + + if ( -f $bisect_start_file ) { + print "Bisect in progress found\n"; + if ($do_check) { + print " If you say yes, then no checks of good or bad will be done\n"; + } + if (defined($replay)) { + print "** BISECT_REPLAY is defined in config file **"; + print " Ignore config option and perform new git bisect log?\n"; + if (read_ync " (yes, no, or cancel) ") { + $replay = update_bisect_replay; + $do_check = 0; + } + } elsif (read_yn "read git log and continue?") { + $replay = update_bisect_replay; + $do_check = 0; + } + } + + if ($do_check) { # get current HEAD my $head = get_sha1("HEAD"); @@ -1973,7 +2312,7 @@ sub bisect { run_command "git bisect reset" or dodie "could not reset git bisect"; - doprint "Bad commit was [$bisect_bad]\n"; + doprint "Bad commit was [$bisect_bad_commit]\n"; success $i; } @@ -2129,7 +2468,7 @@ sub run_config_bisect { } doprint "***** RUN TEST ***\n"; - my $type = $opt{"CONFIG_BISECT_TYPE[$iteration]"}; + my $type = $config_bisect_type; my $ret; my %current_config; @@ -2233,7 +2572,7 @@ sub run_config_bisect { sub config_bisect { my ($i) = @_; - my $start_config = $opt{"CONFIG_BISECT[$i]"}; + my $start_config = $config_bisect; my $tmpconfig = "$tmpdir/use_config"; @@ -2346,29 +2685,29 @@ sub config_bisect { sub patchcheck_reboot { doprint "Reboot and sleep $patchcheck_sleep_time seconds\n"; - reboot $patchcheck_sleep_time; + reboot_to_good $patchcheck_sleep_time; } sub patchcheck { my ($i) = @_; die "PATCHCHECK_START[$i] not defined\n" - if (!defined($opt{"PATCHCHECK_START[$i]"})); + if (!defined($patchcheck_start)); die "PATCHCHECK_TYPE[$i] not defined\n" - if (!defined($opt{"PATCHCHECK_TYPE[$i]"})); + if (!defined($patchcheck_type)); - my $start = $opt{"PATCHCHECK_START[$i]"}; + my $start = $patchcheck_start; my $end = "HEAD"; - if (defined($opt{"PATCHCHECK_END[$i]"})) { - $end = $opt{"PATCHCHECK_END[$i]"}; + if (defined($patchcheck_end)) { + $end = $patchcheck_end; } # Get the true sha1's since we can use things like HEAD~3 $start = get_sha1($start); $end = get_sha1($end); - my $type = $opt{"PATCHCHECK_TYPE[$i]"}; + my $type = $patchcheck_type; # Can't have a test without having a test to run if ($type eq "test" && !defined($run_test)) { @@ -2963,7 +3302,7 @@ sub make_min_config { } doprint "Reboot and wait $sleep_time seconds\n"; - reboot $sleep_time; + reboot_to_good $sleep_time; } success $i; @@ -2985,13 +3324,27 @@ if ($#ARGV == 0) { } if (! -f $ktest_config) { + $newconfig = 1; + get_test_case; open(OUT, ">$ktest_config") or die "Can not create $ktest_config"; print OUT << "EOF" # Generated by ktest.pl # + +# PWD is a ktest.pl variable that will result in the process working +# directory that ktest.pl is executed in. + +# THIS_DIR is automatically assigned the PWD of the path that generated +# the config file. It is best to use this variable when assigning other +# directory paths within this directory. This allows you to easily +# move the test cases to other locations or to other machines. +# +THIS_DIR := $variable{"PWD"} + # Define each test with TEST_START # The config options below it will override the defaults TEST_START +TEST_TYPE = $default{"TEST_TYPE"} DEFAULTS EOF @@ -3011,7 +3364,7 @@ if ($#new_configs >= 0) { open(OUT, ">>$ktest_config") or die "Can not append to $ktest_config"; foreach my $config (@new_configs) { print OUT "$config = $entered_configs{$config}\n"; - $opt{$config} = $entered_configs{$config}; + $opt{$config} = process_variables($entered_configs{$config}); } } @@ -3091,61 +3444,10 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { my $makecmd = set_test_option("MAKE_CMD", $i); - $machine = set_test_option("MACHINE", $i); - $ssh_user = set_test_option("SSH_USER", $i); - $tmpdir = set_test_option("TMP_DIR", $i); - $outputdir = set_test_option("OUTPUT_DIR", $i); - $builddir = set_test_option("BUILD_DIR", $i); - $test_type = set_test_option("TEST_TYPE", $i); - $build_type = set_test_option("BUILD_TYPE", $i); - $build_options = set_test_option("BUILD_OPTIONS", $i); - $pre_build = set_test_option("PRE_BUILD", $i); - $post_build = set_test_option("POST_BUILD", $i); - $pre_build_die = set_test_option("PRE_BUILD_DIE", $i); - $post_build_die = set_test_option("POST_BUILD_DIE", $i); - $power_cycle = set_test_option("POWER_CYCLE", $i); - $reboot = set_test_option("REBOOT", $i); - $noclean = set_test_option("BUILD_NOCLEAN", $i); - $minconfig = set_test_option("MIN_CONFIG", $i); - $output_minconfig = set_test_option("OUTPUT_MIN_CONFIG", $i); - $start_minconfig = set_test_option("START_MIN_CONFIG", $i); - $ignore_config = set_test_option("IGNORE_CONFIG", $i); - $run_test = set_test_option("TEST", $i); - $addconfig = set_test_option("ADD_CONFIG", $i); - $reboot_type = set_test_option("REBOOT_TYPE", $i); - $grub_menu = set_test_option("GRUB_MENU", $i); - $post_install = set_test_option("POST_INSTALL", $i); - $no_install = set_test_option("NO_INSTALL", $i); - $reboot_script = set_test_option("REBOOT_SCRIPT", $i); - $reboot_on_error = set_test_option("REBOOT_ON_ERROR", $i); - $poweroff_on_error = set_test_option("POWEROFF_ON_ERROR", $i); - $die_on_failure = set_test_option("DIE_ON_FAILURE", $i); - $power_off = set_test_option("POWER_OFF", $i); - $powercycle_after_reboot = set_test_option("POWERCYCLE_AFTER_REBOOT", $i); - $poweroff_after_halt = set_test_option("POWEROFF_AFTER_HALT", $i); - $sleep_time = set_test_option("SLEEP_TIME", $i); - $bisect_sleep_time = set_test_option("BISECT_SLEEP_TIME", $i); - $patchcheck_sleep_time = set_test_option("PATCHCHECK_SLEEP_TIME", $i); - $ignore_warnings = set_test_option("IGNORE_WARNINGS", $i); - $bisect_manual = set_test_option("BISECT_MANUAL", $i); - $bisect_skip = set_test_option("BISECT_SKIP", $i); - $config_bisect_good = set_test_option("CONFIG_BISECT_GOOD", $i); - $store_failures = set_test_option("STORE_FAILURES", $i); - $test_name = set_test_option("TEST_NAME", $i); - $timeout = set_test_option("TIMEOUT", $i); - $booted_timeout = set_test_option("BOOTED_TIMEOUT", $i); - $console = set_test_option("CONSOLE", $i); - $detect_triplefault = set_test_option("DETECT_TRIPLE_FAULT", $i); - $success_line = set_test_option("SUCCESS_LINE", $i); - $reboot_success_line = set_test_option("REBOOT_SUCCESS_LINE", $i); - $stop_after_success = set_test_option("STOP_AFTER_SUCCESS", $i); - $stop_after_failure = set_test_option("STOP_AFTER_FAILURE", $i); - $stop_test_after = set_test_option("STOP_TEST_AFTER", $i); - $build_target = set_test_option("BUILD_TARGET", $i); - $ssh_exec = set_test_option("SSH_EXEC", $i); - $scp_to_target = set_test_option("SCP_TO_TARGET", $i); - $target_image = set_test_option("TARGET_IMAGE", $i); - $localversion = set_test_option("LOCALVERSION", $i); + # Load all the options into their mapped variable names + foreach my $opt (keys %option_map) { + ${$option_map{$opt}} = set_test_option($opt, $i); + } $start_minconfig_defined = 1; @@ -3166,26 +3468,26 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { $ENV{"SSH_USER"} = $ssh_user; $ENV{"MACHINE"} = $machine; - $target = "$ssh_user\@$machine"; - $buildlog = "$tmpdir/buildlog-$machine"; + $testlog = "$tmpdir/testlog-$machine"; $dmesg = "$tmpdir/dmesg-$machine"; $make = "$makecmd O=$outputdir"; $output_config = "$outputdir/.config"; - if ($reboot_type eq "grub") { - dodie "GRUB_MENU not defined" if (!defined($grub_menu)); - } elsif (!defined($reboot_script)) { - dodie "REBOOT_SCRIPT not defined" + if (!$buildonly) { + $target = "$ssh_user\@$machine"; + if ($reboot_type eq "grub") { + dodie "GRUB_MENU not defined" if (!defined($grub_menu)); + } } my $run_type = $build_type; if ($test_type eq "patchcheck") { - $run_type = $opt{"PATCHCHECK_TYPE[$i]"}; + $run_type = $patchcheck_type; } elsif ($test_type eq "bisect") { - $run_type = $opt{"BISECT_TYPE[$i]"}; + $run_type = $bisect_type; } elsif ($test_type eq "config_bisect") { - $run_type = $opt{"CONFIG_BISECT_TYPE[$i]"}; + $run_type = $config_bisect_type; } if ($test_type eq "make_min_config") { @@ -3205,6 +3507,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { unlink $dmesg; unlink $buildlog; + unlink $testlog; if (defined($addconfig)) { my $min = $minconfig; @@ -3216,7 +3519,6 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { $minconfig = "$tmpdir/add_config"; } - my $checkout = $opt{"CHECKOUT[$i]"}; if (defined($checkout)) { run_command "git checkout $checkout" or die "failed to checkout $checkout"; @@ -3267,7 +3569,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { if ($opt{"POWEROFF_ON_SUCCESS"}) { halt; } elsif ($opt{"REBOOT_ON_SUCCESS"} && !do_not_reboot) { - reboot; + reboot_to_good; } doprint "\n $successes of $opt{NUM_TESTS} tests were successful\n\n"; |