diff options
Diffstat (limited to 'include/linux/pse-pd')
| -rw-r--r-- | include/linux/pse-pd/pse.h | 51 |
1 files changed, 51 insertions, 0 deletions
diff --git a/include/linux/pse-pd/pse.h b/include/linux/pse-pd/pse.h index 6eec24ffa866..591a53e082e6 100644 --- a/include/linux/pse-pd/pse.h +++ b/include/linux/pse-pd/pse.h @@ -9,6 +9,9 @@ #include <linux/list.h> #include <uapi/linux/ethtool.h> +/* Maximum current in uA according to IEEE 802.3-2022 Table 145-1 */ +#define MAX_PI_CURRENT 1920000 + struct phy_device; struct pse_controller_dev; @@ -36,12 +39,29 @@ struct pse_control_config { * functions. IEEE 802.3-2022 30.9.1.1.2 aPSEAdminState * @c33_pw_status: power detection status of the PSE. * IEEE 802.3-2022 30.9.1.1.5 aPSEPowerDetectionStatus: + * @c33_pw_class: detected class of a powered PD + * IEEE 802.3-2022 30.9.1.1.8 aPSEPowerClassification + * @c33_actual_pw: power currently delivered by the PSE in mW + * IEEE 802.3-2022 30.9.1.1.23 aPSEActualPower + * @c33_ext_state_info: extended state information of the PSE + * @c33_avail_pw_limit: available power limit of the PSE in mW + * IEEE 802.3-2022 145.2.5.4 pse_avail_pwr + * @c33_pw_limit_ranges: supported power limit configuration range. The driver + * is in charge of the memory allocation. + * @c33_pw_limit_nb_ranges: number of supported power limit configuration + * ranges */ struct pse_control_status { enum ethtool_podl_pse_admin_state podl_admin_state; enum ethtool_podl_pse_pw_d_status podl_pw_status; enum ethtool_c33_pse_admin_state c33_admin_state; enum ethtool_c33_pse_pw_d_status c33_pw_status; + u32 c33_pw_class; + u32 c33_actual_pw; + struct ethtool_c33_pse_ext_state_info c33_ext_state_info; + u32 c33_avail_pw_limit; + struct ethtool_c33_pse_pw_limit_range *c33_pw_limit_ranges; + u32 c33_pw_limit_nb_ranges; }; /** @@ -53,6 +73,14 @@ struct pse_control_status { * May also return negative errno. * @pi_enable: Configure the PSE PI as enabled. * @pi_disable: Configure the PSE PI as disabled. + * @pi_get_voltage: Return voltage similarly to get_voltage regulator + * callback. + * @pi_get_current_limit: Get the configured current limit similarly to + * get_current_limit regulator callback. + * @pi_set_current_limit: Configure the current limit similarly to + * set_current_limit regulator callback. + * Should not return an error in case of MAX_PI_CURRENT + * current value set. */ struct pse_controller_ops { int (*ethtool_get_status)(struct pse_controller_dev *pcdev, @@ -62,6 +90,11 @@ struct pse_controller_ops { int (*pi_is_enabled)(struct pse_controller_dev *pcdev, int id); int (*pi_enable)(struct pse_controller_dev *pcdev, int id); int (*pi_disable)(struct pse_controller_dev *pcdev, int id); + int (*pi_get_voltage)(struct pse_controller_dev *pcdev, int id); + int (*pi_get_current_limit)(struct pse_controller_dev *pcdev, + int id); + int (*pi_set_current_limit)(struct pse_controller_dev *pcdev, + int id, int max_uA); }; struct module; @@ -148,6 +181,11 @@ int pse_ethtool_get_status(struct pse_control *psec, int pse_ethtool_set_config(struct pse_control *psec, struct netlink_ext_ack *extack, const struct pse_control_config *config); +int pse_ethtool_set_pw_limit(struct pse_control *psec, + struct netlink_ext_ack *extack, + const unsigned int pw_limit); +int pse_ethtool_get_pw_limit(struct pse_control *psec, + struct netlink_ext_ack *extack); bool pse_has_podl(struct pse_control *psec); bool pse_has_c33(struct pse_control *psec); @@ -177,6 +215,19 @@ static inline int pse_ethtool_set_config(struct pse_control *psec, return -EOPNOTSUPP; } +static inline int pse_ethtool_set_pw_limit(struct pse_control *psec, + struct netlink_ext_ack *extack, + const unsigned int pw_limit) +{ + return -EOPNOTSUPP; +} + +static inline int pse_ethtool_get_pw_limit(struct pse_control *psec, + struct netlink_ext_ack *extack) +{ + return -EOPNOTSUPP; +} + static inline bool pse_has_podl(struct pse_control *psec) { return false; |