diff options
Diffstat (limited to 'drivers')
122 files changed, 1480 insertions, 588 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index a7799a99f2d9..8a851d0f4384 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -254,13 +254,6 @@ config ACPI_PCI_SLOT help you correlate PCI bus addresses with the physical geography of your slots. If you are unsure, say N. -config ACPI_SYSTEM - bool - default y - help - This driver will enable your system to shut down using ACPI, and - dump your ACPI DSDT table using /proc/acpi/dsdt. - config X86_PM_TIMER bool "Power Management Timer Support" if EMBEDDED depends on X86 diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 65d90c720b5a..b130ea0d0759 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -52,7 +52,7 @@ obj-$(CONFIG_ACPI_PROCESSOR) += processor.o obj-$(CONFIG_ACPI_CONTAINER) += container.o obj-$(CONFIG_ACPI_THERMAL) += thermal.o obj-y += power.o -obj-$(CONFIG_ACPI_SYSTEM) += system.o event.o +obj-y += system.o event.o obj-$(CONFIG_ACPI_DEBUG) += debug.o obj-$(CONFIG_ACPI_NUMA) += numa.o obj-$(CONFIG_ACPI_HOTPLUG_MEMORY) += acpi_memhotplug.o diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index 65132f920459..69cbc57c2d1c 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -138,6 +138,29 @@ static int acpi_battery_technology(struct acpi_battery *battery) static int acpi_battery_get_state(struct acpi_battery *battery); +static int acpi_battery_is_charged(struct acpi_battery *battery) +{ + /* either charging or discharging */ + if (battery->state != 0) + return 0; + + /* battery not reporting charge */ + if (battery->capacity_now == ACPI_BATTERY_VALUE_UNKNOWN || + battery->capacity_now == 0) + return 0; + + /* good batteries update full_charge as the batteries degrade */ + if (battery->full_charge_capacity == battery->capacity_now) + return 1; + + /* fallback to using design values for broken batteries */ + if (battery->design_capacity == battery->capacity_now) + return 1; + + /* we don't do any sort of metric based on percentages */ + return 0; +} + static int acpi_battery_get_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) @@ -155,7 +178,7 @@ static int acpi_battery_get_property(struct power_supply *psy, val->intval = POWER_SUPPLY_STATUS_DISCHARGING; else if (battery->state & 0x02) val->intval = POWER_SUPPLY_STATUS_CHARGING; - else if (battery->state == 0) + else if (acpi_battery_is_charged(battery)) val->intval = POWER_SUPPLY_STATUS_FULL; else val->intval = POWER_SUPPLY_STATUS_UNKNOWN; diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 5c2f5d343be6..2fe15060dcdc 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -120,6 +120,8 @@ static struct acpi_ec { spinlock_t curr_lock; } *boot_ec, *first_ec; +static int EC_FLAGS_MSI; /* Out-of-spec MSI controller */ + /* -------------------------------------------------------------------------- Transaction Management -------------------------------------------------------------------------- */ @@ -259,6 +261,8 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, clear_bit(EC_FLAGS_GPE_MODE, &ec->flags); acpi_disable_gpe(NULL, ec->gpe); } + if (EC_FLAGS_MSI) + udelay(ACPI_EC_DELAY); /* start transaction */ spin_lock_irqsave(&ec->curr_lock, tmp); /* following two actions should be kept atomic */ @@ -967,6 +971,11 @@ int __init acpi_ec_ecdt_probe(void) /* * Generate a boot ec context */ + if (dmi_name_in_vendors("Micro-Star") || + dmi_name_in_vendors("Notebook")) { + pr_info(PREFIX "Enabling special treatment for EC from MSI.\n"); + EC_FLAGS_MSI = 1; + } status = acpi_get_table(ACPI_SIG_ECDT, 1, (struct acpi_table_header **)&ecdt_ptr); if (ACPI_SUCCESS(status)) { diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 0b299b0f8172..714cb046b594 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -773,18 +773,32 @@ unsigned int ata_sff_data_xfer32(struct ata_device *dev, unsigned char *buf, else iowrite32_rep(data_addr, buf, words); + /* Transfer trailing bytes, if any */ if (unlikely(slop)) { - __le32 pad; + unsigned char pad[4]; + + /* Point buf to the tail of buffer */ + buf += buflen - slop; + + /* + * Use io*_rep() accessors here as well to avoid pointlessly + * swapping bytes to and fro on the big endian machines... + */ if (rw == READ) { - pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr)); - memcpy(buf + buflen - slop, &pad, slop); + if (slop < 3) + ioread16_rep(data_addr, pad, 1); + else + ioread32_rep(data_addr, pad, 1); + memcpy(buf, pad, slop); } else { - memcpy(&pad, buf + buflen - slop, slop); - iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr); + memcpy(pad, buf, slop); + if (slop < 3) + iowrite16_rep(data_addr, pad, 1); + else + iowrite32_rep(data_addr, pad, 1); } - words++; } - return words << 2; + return (buflen + 1) & ~1; } EXPORT_SYMBOL_GPL(ata_sff_data_xfer32); diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 79a6c9a0b721..ba556d3e6963 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -110,7 +110,8 @@ static const struct via_isa_bridge { { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA }, - { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES}, + { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES }, + { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES }, { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, @@ -593,6 +594,7 @@ static int via_reinit_one(struct pci_dev *pdev) #endif static const struct pci_device_id via[] = { + { PCI_VDEVICE(VIA, 0x0415), }, { PCI_VDEVICE(VIA, 0x0571), }, { PCI_VDEVICE(VIA, 0x0581), }, { PCI_VDEVICE(VIA, 0x1571), }, diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 444af0415ca1..55a8eed3f3a3 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -421,19 +421,21 @@ static struct ata_port_operations nv_generic_ops = { .hardreset = ATA_OP_NULL, }; -/* OSDL bz3352 reports that nf2/3 controllers can't determine device - * signature reliably. Also, the following thread reports detection - * failure on cold boot with the standard debouncing timing. +/* nf2 is ripe with hardreset related problems. + * + * kernel bz#3352 reports nf2/3 controllers can't determine device + * signature reliably. The following thread reports detection failure + * on cold boot with the standard debouncing timing. * * http://thread.gmane.org/gmane.linux.ide/34098 * - * Debounce with hotplug timing and request follow-up SRST. + * And bz#12176 reports that hardreset simply doesn't work on nf2. + * Give up on it and just don't do hardreset. */ static struct ata_port_operations nv_nf2_ops = { - .inherits = &nv_common_ops, + .inherits = &nv_generic_ops, .freeze = nv_nf2_freeze, .thaw = nv_nf2_thaw, - .hardreset = nv_noclassify_hardreset, }; /* For initial probing after boot and hot plugging, hardreset mostly diff --git a/drivers/base/base.h b/drivers/base/base.h index 0a5f055dffba..9f50f1b545dc 100644 --- a/drivers/base/base.h +++ b/drivers/base/base.h @@ -88,8 +88,6 @@ extern void driver_detach(struct device_driver *drv); extern int driver_probe_device(struct device_driver *drv, struct device *dev); extern void sysdev_shutdown(void); -extern int sysdev_suspend(pm_message_t state); -extern int sysdev_resume(void); extern char *make_class_name(const char *name, struct kobject *kobj); diff --git a/drivers/base/dd.c b/drivers/base/dd.c index 315bed8d5e7f..135231239103 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -18,9 +18,11 @@ */ #include <linux/device.h> +#include <linux/delay.h> #include <linux/module.h> #include <linux/kthread.h> #include <linux/wait.h> +#include <linux/async.h> #include "base.h" #include "power/power.h" @@ -168,6 +170,21 @@ int driver_probe_done(void) } /** + * wait_for_device_probe + * Wait for device probing to be completed. + * + * Note: this function polls at 100 msec intervals. + */ +int wait_for_device_probe(void) +{ + /* wait for the known devices to complete their probing */ + while (driver_probe_done() != 0) + msleep(100); + async_synchronize_full(); + return 0; +} + +/** * driver_probe_device - attempt to bind device & driver together * @drv: driver to bind a device to * @dev: device to try to bind to the driver diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 670c9d6c1407..2d14f4ae6c01 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -333,7 +333,6 @@ static void dpm_power_up(pm_message_t state) */ void device_power_up(pm_message_t state) { - sysdev_resume(); dpm_power_up(state); } EXPORT_SYMBOL_GPL(device_power_up); @@ -577,8 +576,6 @@ int device_power_down(pm_message_t state) } dev->power.status = DPM_OFF_IRQ; } - if (!error) - error = sysdev_suspend(state); if (error) dpm_power_up(resume_event(state)); return error; diff --git a/drivers/block/aoe/aoe.h b/drivers/block/aoe/aoe.h index c237527b1aa5..5e41e6dd657b 100644 --- a/drivers/block/aoe/aoe.h +++ b/drivers/block/aoe/aoe.h @@ -18,6 +18,7 @@ enum { AOECMD_ATA, AOECMD_CFG, + AOECMD_VEND_MIN = 0xf0, AOEFL_RSP = (1<<3), AOEFL_ERR = (1<<2), diff --git a/drivers/block/aoe/aoenet.c b/drivers/block/aoe/aoenet.c index 30de5b1c647e..c6099ba9a4b8 100644 --- a/drivers/block/aoe/aoenet.c +++ b/drivers/block/aoe/aoenet.c @@ -142,6 +142,8 @@ aoenet_rcv(struct sk_buff *skb, struct net_device *ifp, struct packet_type *pt, aoecmd_cfg_rsp(skb); break; default: + if (h->cmd >= AOECMD_VEND_MIN) + break; /* don't complain about vendor commands */ printk(KERN_INFO "aoe: unknown cmd %d\n", h->cmd); } exit: diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c index 69e1df7dfa14..4234c11c1e4c 100644 --- a/drivers/block/ataflop.c +++ b/drivers/block/ataflop.c @@ -1730,7 +1730,7 @@ static int __init fd_test_drive_present( int drive ) timeout = jiffies + 2*HZ+HZ/2; while (time_before(jiffies, timeout)) - if (!(mfp.par_dt_reg & 0x20)) + if (!(st_mfp.par_dt_reg & 0x20)) break; status = FDC_READ( FDCREG_STATUS ); @@ -1747,7 +1747,7 @@ static int __init fd_test_drive_present( int drive ) /* dummy seek command to make WP bit accessible */ FDC_WRITE( FDCREG_DATA, 0 ); FDC_WRITE( FDCREG_CMD, FDCCMD_SEEK ); - while( mfp.par_dt_reg & 0x20 ) + while( st_mfp.par_dt_reg & 0x20 ) ; status = FDC_READ( FDCREG_STATUS ); } diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 01e69383d9c0..d2cb67b61176 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -3390,6 +3390,203 @@ static void free_hba(int i) kfree(p); } +/* Send a message CDB to the firmware. */ +static __devinit int cciss_message(struct pci_dev *pdev, unsigned char opcode, unsigned char type) +{ + typedef struct { + CommandListHeader_struct CommandHeader; + RequestBlock_struct Request; + ErrDescriptor_struct ErrorDescriptor; + } Command; + static const size_t cmd_sz = sizeof(Command) + sizeof(ErrorInfo_struct); + Command *cmd; + dma_addr_t paddr64; + uint32_t paddr32, tag; + void __iomem *vaddr; + int i, err; + + vaddr = ioremap_nocache(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); + if (vaddr == NULL) + return -ENOMEM; + + /* The Inbound Post Queue only accepts 32-bit physical addresses for the + CCISS commands, so they must be allocated from the lower 4GiB of + memory. */ + err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (err) { + iounmap(vaddr); + return -ENOMEM; + } + + cmd = pci_alloc_consistent(pdev, cmd_sz, &paddr64); + if (cmd == NULL) { + iounmap(vaddr); + return -ENOMEM; + } + + /* This must fit, because of the 32-bit consistent DMA mask. Also, + although there's no guarantee, we assume that the address is at + least 4-byte aligned (most likely, it's page-aligned). */ + paddr32 = paddr64; + + cmd->CommandHeader.ReplyQueue = 0; + cmd->CommandHeader.SGList = 0; + cmd->CommandHeader.SGTotal = 0; + cmd->CommandHeader.Tag.lower = paddr32; + cmd->CommandHeader.Tag.upper = 0; + memset(&cmd->CommandHeader.LUN.LunAddrBytes, 0, 8); + + cmd->Request.CDBLen = 16; + cmd->Request.Type.Type = TYPE_MSG; + cmd->Request.Type.Attribute = ATTR_HEADOFQUEUE; + cmd->Request.Type.Direction = XFER_NONE; + cmd->Request.Timeout = 0; /* Don't time out */ + cmd->Request.CDB[0] = opcode; + cmd->Request.CDB[1] = type; + memset(&cmd->Request.CDB[2], 0, 14); /* the rest of the CDB is reserved */ + + cmd->ErrorDescriptor.Addr.lower = paddr32 + sizeof(Command); + cmd->ErrorDescriptor.Addr.upper = 0; + cmd->ErrorDescriptor.Len = sizeof(ErrorInfo_struct); + + writel(paddr32, vaddr + SA5_REQUEST_PORT_OFFSET); + + for (i = 0; i < 10; i++) { + tag = readl(vaddr + SA5_REPLY_PORT_OFFSET); + if ((tag & ~3) == paddr32) + break; + schedule_timeout_uninterruptible(HZ); + } + + iounmap(vaddr); + + /* we leak the DMA buffer here ... no choice since the controller could + still complete the command. */ + if (i == 10) { + printk(KERN_ERR "cciss: controller message %02x:%02x timed out\n", + opcode, type); + return -ETIMEDOUT; + } + + pci_free_consistent(pdev, cmd_sz, cmd, paddr64); + + if (tag & 2) { + printk(KERN_ERR "cciss: controller message %02x:%02x failed\n", + opcode, type); + return -EIO; + } + + printk(KERN_INFO "cciss: controller message %02x:%02x succeeded\n", + opcode, type); + return 0; +} + +#define cciss_soft_reset_controller(p) cciss_message(p, 1, 0) +#define cciss_noop(p) cciss_message(p, 3, 0) + +static __devinit int cciss_reset_msi(struct pci_dev *pdev) +{ +/* the #defines are stolen from drivers/pci/msi.h. */ +#define msi_control_reg(base) (base + PCI_MSI_FLAGS) +#define PCI_MSIX_FLAGS_ENABLE (1 << 15) + + int pos; + u16 control = 0; + + pos = pci_find_capability(pdev, PCI_CAP_ID_MSI); + if (pos) { + pci_read_config_word(pdev, msi_control_reg(pos), &control); + if (control & PCI_MSI_FLAGS_ENABLE) { + printk(KERN_INFO "cciss: resetting MSI\n"); + pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSI_FLAGS_ENABLE); + } + } + + pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX); + if (pos) { + pci_read_config_word(pdev, msi_control_reg(pos), &control); + if (control & PCI_MSIX_FLAGS_ENABLE) { + printk(KERN_INFO "cciss: resetting MSI-X\n"); + pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSIX_FLAGS_ENABLE); + } + } + + return 0; +} + +/* This does a hard reset of the controller using PCI power management + * states. */ +static __devinit int cciss_hard_reset_controller(struct pci_dev *pdev) +{ + u16 pmcsr, saved_config_space[32]; + int i, pos; + + printk(KERN_INFO "cciss: using PCI PM to reset controller\n"); + + /* This is very nearly the same thing as + + pci_save_state(pci_dev); + pci_set_power_state(pci_dev, PCI_D3hot); + pci_set_power_state(pci_dev, PCI_D0); + pci_restore_state(pci_dev); + + but we can't use these nice canned kernel routines on + kexec, because they also check the MSI/MSI-X state in PCI + configuration space and do the wrong thing when it is + set/cleared. Also, the pci_save/restore_state functions + violate the ordering requirements for restoring the + configuration space from the CCISS document (see the + comment below). So we roll our own .... */ + + for (i = 0; i < 32; i++) + pci_read_config_word(pdev, 2*i, &saved_config_space[i]); + + pos = pci_find_capability(pdev, PCI_CAP_ID_PM); + if (pos == 0) { + printk(KERN_ERR "cciss_reset_controller: PCI PM not supported\n"); + return -ENODEV; + } + + /* Quoting from the Open CISS Specification: "The Power + * Management Control/Status Register (CSR) controls the power + * state of the device. The normal operating state is D0, + * CSR=00h. The software off state is D3, CSR=03h. To reset + * the controller, place the interface device in D3 then to + * D0, this causes a secondary PCI reset which will reset the + * controller." */ + + /* enter the D3hot power management state */ + pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr); + pmcsr &= ~PCI_PM_CTRL_STATE_MASK; + pmcsr |= PCI_D3hot; + pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr); + + schedule_timeout_uninterruptible(HZ >> 1); + + /* enter the D0 power management state */ + pmcsr &= ~PCI_PM_CTRL_STATE_MASK; + pmcsr |= PCI_D0; + pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr); + + schedule_timeout_uninterruptible(HZ >> 1); + + /* Restore the PCI configuration space. The Open CISS + * Specification says, "Restore the PCI Configuration + * Registers, offsets 00h through 60h. It is important to + * restore the command register, 16-bits at offset 04h, + * last. Do not restore the configuration status register, + * 16-bits at offset 06h." Note that the offset is 2*i. */ + for (i = 0; i < 32; i++) { + if (i == 2 || i == 3) + continue; + pci_write_config_word(pdev, 2*i, saved_config_space[i]); + } + wmb(); + pci_write_config_word(pdev, 4, saved_config_space[2]); + + return 0; +} + /* * This is it. Find all the controllers and register them. I really hate * stealing all these major device numbers. @@ -3404,6 +3601,24 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, int dac, return_code; InquiryData_struct *inq_buff = NULL; + if (reset_devices) { + /* Reset the controller with a PCI power-cycle */ + if (cciss_hard_reset_controller(pdev) || cciss_reset_msi(pdev)) + return -ENODEV; + + /* Some devices (notably the HP Smart Array 5i Controller) + need a little pause here */ + schedule_timeout_uninterruptible(30*HZ); + + /* Now try to get the controller to respond to a no-op */ + for (i=0; i<12; i++) { + if (cciss_noop(pdev) == 0) + break; + else + printk("cciss: no-op failed%s\n", (i < 11 ? "; re-trying" : "")); + } + } + i = alloc_cciss_hba(); if (i < 0) return -1; diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index cf29cc4e6ab7..83d8ed39433d 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -558,6 +558,8 @@ static void process_fd_request(void); static void recalibrate_floppy(void); static void floppy_shutdown(unsigned long); +static int floppy_request_regions(int); +static void floppy_release_regions(int); static int floppy_grab_irq_and_dma(void); static void floppy_release_irq_and_dma(void); @@ -4274,8 +4276,7 @@ static int __init floppy_init(void) FDCS->rawcmd = 2; if (user_reset_fdc(-1, FD_RESET_ALWAYS, 0)) { /* free ioports reserved by floppy_grab_irq_and_dma() */ - release_region(FDCS->address + 2, 4); - release_region(FDCS->address + 7, 1); + floppy_release_regions(fdc); FDCS->address = -1; FDCS->version = FDC_NONE; continue; @@ -4284,8 +4285,7 @@ static int __init floppy_init(void) FDCS->version = get_fdc_version(); if (FDCS->version == FDC_NONE) { /* free ioports reserved by floppy_grab_irq_and_dma() */ - release_region(FDCS->address + 2, 4); - release_region(FDCS->address + 7, 1); + floppy_release_regions(fdc); FDCS->address = -1; continue; } @@ -4358,6 +4358,47 @@ out_put_disk: static DEFINE_SPINLOCK(floppy_usage_lock); +static const struct io_region { + int offset; + int size; +} io_regions[] = { + { 2, 1 }, + /* address + 3 is sometimes reserved by pnp bios for motherboard */ + { 4, 2 }, + /* address + 6 is reserved, and may be taken by IDE. + * Unfortunately, Adaptec doesn't know this :-(, */ + { 7, 1 }, +}; + +static void floppy_release_allocated_regions(int fdc, const struct io_region *p) +{ + while (p != io_regions) { + p--; + release_region(FDCS->address + p->offset, p->size); + } +} + +#define ARRAY_END(X) (&((X)[ARRAY_SIZE(X)])) + +static int floppy_request_regions(int fdc) +{ + const struct io_region *p; + + for (p = io_regions; p < ARRAY_END(io_regions); p++) { + if (!request_region(FDCS->address + p->offset, p->size, "floppy")) { + DPRINT("Floppy io-port 0x%04lx in use\n", FDCS->address + p->offset); + floppy_release_allocated_regions(fdc, p); + return -EBUSY; + } + } + return 0; +} + +static void floppy_release_regions(int fdc) +{ + floppy_release_allocated_regions(fdc, ARRAY_END(io_regions)); +} + static int floppy_grab_irq_and_dma(void) { unsigned long flags; @@ -4399,18 +4440,8 @@ static int floppy_grab_irq_and_dma(void) for (fdc = 0; fdc < N_FDC; fdc++) { if (FDCS->address != -1) { - if (!request_region(FDCS->address + 2, 4, "floppy")) { - DPRINT("Floppy io-port 0x%04lx in use\n", - FDCS->address + 2); - goto cleanup1; - } - if (!request_region(FDCS->address + 7, 1, "floppy DIR")) { - DPRINT("Floppy io-port 0x%04lx in use\n", - FDCS->address + 7); - goto cleanup2; - } - /* address + 6 is reserved, and may be taken by IDE. - * Unfortunately, Adaptec doesn't know this :-(, */ + if (floppy_request_regions(fdc)) + goto cleanup; } } for (fdc = 0; fdc < N_FDC; fdc++) { @@ -4432,15 +4463,11 @@ static int floppy_grab_irq_and_dma(void) fdc = 0; irqdma_allocated = 1; return 0; -cleanup2: - release_region(FDCS->address + 2, 4); -cleanup1: +cleanup: fd_free_irq(); fd_free_dma(); - while (--fdc >= 0) { - release_region(FDCS->address + 2, 4); - release_region(FDCS->address + 7, 1); - } + while (--fdc >= 0) + floppy_release_regions(fdc); spin_lock_irqsave(&floppy_usage_lock, flags); usage_count--; spin_unlock_irqrestore(&floppy_usage_lock, flags); @@ -4501,10 +4528,8 @@ static void floppy_release_irq_and_dma(void) #endif old_fdc = fdc; for (fdc = 0; fdc < N_FDC; fdc++) - if (FDCS->address != -1) { - release_region(FDCS->address + 2, 4); - release_region(FDCS->address + 7, 1); - } + if (FDCS->address != -1) + floppy_release_regions(fdc); fdc = old_fdc; } diff --git a/drivers/block/paride/pg.c b/drivers/block/paride/pg.c index 9dfa27163001..c397b3ddba9b 100644 --- a/drivers/block/paride/pg.c +++ b/drivers/block/paride/pg.c @@ -422,7 +422,7 @@ static void xs(char *buf, char *targ, int len) for (k = 0; k < len; k++) { char c = *buf++; - if (c != ' ' || c != l) + if (c != ' ' && c != l) l = *targ++ = c; } if (l == ' ') diff --git a/drivers/char/scc.h b/drivers/char/scc.h index 93998f5baff5..341b1142bea8 100644 --- a/drivers/char/scc.h +++ b/drivers/char/scc.h @@ -387,7 +387,7 @@ struct scc_port { /* The SCC needs 3.5 PCLK cycles recovery time between to register * accesses. PCLK runs with 8 MHz on an Atari, so this delay is 3.5 * * 125 ns = 437.5 ns. This is too short for udelay(). - * 10/16/95: A tstb mfp.par_dt_reg takes 600ns (sure?) and thus should be + * 10/16/95: A tstb st_mfp.par_dt_reg takes 600ns (sure?) and thus should be * quite right */ diff --git a/drivers/char/sx.c b/drivers/char/sx.c index f146e90404fa..518f2a25d91e 100644 --- a/drivers/char/sx.c +++ b/drivers/char/sx.c @@ -1746,9 +1746,10 @@ static long sx_fw_ioctl(struct file *filp, unsigned int cmd, sx_dprintk(SX_DEBUG_FIRMWARE, "returning type= %ld\n", rc); break; case SXIO_DO_RAMTEST: - if (sx_initialized) /* Already initialized: better not ramtest the board. */ + if (sx_initialized) { /* Already initialized: better not ramtest the board. */ rc = -EPERM; break; + } if (IS_SX_BOARD(board)) { rc = do_memtest(board, 0, 0x7000); if (!rc) @@ -1788,7 +1789,7 @@ static long sx_fw_ioctl(struct file *filp, unsigned int cmd, nbytes - i : SX_CHUNK_SIZE)) { kfree(tmp); rc = -EFAULT; - break; + goto out; } memcpy_toio(board->base2 + offset + i, tmp, (i + SX_CHUNK_SIZE > nbytes) ? diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index a58993011edb..280a9d263eb3 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -518,6 +518,7 @@ struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask, dma_filter_fn fn, v dma_chan_name(chan), err); else break; + chan->private = NULL; chan = NULL; } } @@ -536,6 +537,7 @@ void dma_release_channel(struct dma_chan *chan) WARN_ONCE(chan->client_count != 1, "chan reference count %d != 1\n", chan->client_count); dma_chan_put(chan); + chan->private = NULL; mutex_unlock(&dma_list_mutex); } EXPORT_SYMBOL_GPL(dma_release_channel); diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c index 6b702cc46b3d..a97c07eef7ec 100644 --- a/drivers/dma/dw_dmac.c +++ b/drivers/dma/dw_dmac.c @@ -560,7 +560,7 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, unsigned long flags) { struct dw_dma_chan *dwc = to_dw_dma_chan(chan); - struct dw_dma_slave *dws = dwc->dws; + struct dw_dma_slave *dws = chan->private; struct dw_desc *prev; struct dw_desc *first; u32 ctllo; @@ -790,7 +790,7 @@ static int dwc_alloc_chan_resources(struct dma_chan *chan) cfghi = DWC_CFGH_FIFO_MODE; cfglo = 0; - dws = dwc->dws; + dws = chan->private; if (dws) { /* * We need controller-specific data to set up slave @@ -866,7 +866,6 @@ static void dwc_free_chan_resources(struct dma_chan *chan) spin_lock_bh(&dwc->lock); list_splice_init(&dwc->free_list, &list); dwc->descs_allocated = 0; - dwc->dws = NULL; /* Disable interrupts */ channel_clear_bit(dw, MASK.XFER, dwc->mask); diff --git a/drivers/dma/dw_dmac_regs.h b/drivers/dma/dw_dmac_regs.h index 00fdd187bb0c..b252b202c5cf 100644 --- a/drivers/dma/dw_dmac_regs.h +++ b/drivers/dma/dw_dmac_regs.h @@ -139,8 +139,6 @@ struct dw_dma_chan { struct list_head queue; struct list_head free_list; - struct dw_dma_slave *dws; - unsigned int descs_allocated; }; diff --git a/drivers/firmware/memmap.c b/drivers/firmware/memmap.c index 261b9aa3f248..05aa2d406ac6 100644 --- a/drivers/firmware/memmap.c +++ b/drivers/firmware/memmap.c @@ -1,7 +1,7 @@ /* * linux/drivers/firmware/memmap.c * Copyright (C) 2008 SUSE LINUX Products GmbH - * by Bernhard Walle <bwalle@suse.de> + * by Bernhard Walle <bernhard.walle@gmx.de> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License v2.0 as published by diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 4be3acbaaf9a..3a22eb9be378 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -80,18 +80,17 @@ config DRM_I915 XFree86 4.4 and above. If unsure, build this and i830 as modules and the X server will load the correct one. -endchoice - config DRM_I915_KMS bool "Enable modesetting on intel by default" depends on DRM_I915 help - Choose this option if you want kernel modesetting enabled by default, - and you have a new enough userspace to support this. Running old - userspaces with this enabled will cause pain. Note that this causes - the driver to bind to PCI devices, which precludes loading things - like intelfb. + Choose this option if you want kernel modesetting enabled by default, + and you have a new enough userspace to support this. Running old + userspaces with this enabled will cause pain. Note that this causes + the driver to bind to PCI devices, which precludes loading things + like intelfb. +endchoice config DRM_MGA tristate "Matrox g200/g400" diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index bfce0992fefb..94a768871734 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -1741,9 +1741,8 @@ out: * RETURNS: * Zero on success, errno on failure. */ -void drm_fb_release(struct file *filp) +void drm_fb_release(struct drm_file *priv) { - struct drm_file *priv = filp->private_data; struct drm_device *dev = priv->minor->dev; struct drm_framebuffer *fb, *tfb; diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 964c5eb1fada..733028b4d45e 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -512,8 +512,8 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, if (drm_mode_equal(&saved_mode, &crtc->mode)) { if (saved_x != crtc->x || saved_y != crtc->y || depth_changed || bpp_changed) { - crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, - old_fb); + ret = !crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, + old_fb); goto done; } } @@ -552,7 +552,9 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, /* Set up the DPLL and any encoders state that needs to adjust or depend * on the DPLL. */ - crtc_funcs->mode_set(crtc, mode, adjusted_mode, x, y, old_fb); + ret = !crtc_funcs->mode_set(crtc, mode, adjusted_mode, x, y, old_fb); + if (!ret) + goto done; list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { @@ -752,6 +754,8 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) if (!drm_crtc_helper_set_mode(set->crtc, set->mode, set->x, set->y, old_fb)) { + DRM_ERROR("failed to set mode on crtc %p\n", + set->crtc); ret = -EINVAL; goto fail_set_mode; } @@ -765,7 +769,10 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) old_fb = set->crtc->fb; if (set->crtc->fb != set->fb) set->crtc->fb = set->fb; - crtc_funcs->mode_set_base(set->crtc, set->x, set->y, old_fb); + ret = crtc_funcs->mode_set_base(set->crtc, + set->x, set->y, old_fb); + if (ret != 0) + goto fail_set_mode; } kfree(save_encoders); @@ -775,8 +782,12 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set) fail_set_mode: set->crtc->enabled = save_enabled; count = 0; - list_for_each_entry(connector, &dev->mode_config.connector_list, head) + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + if (!connector->encoder) + continue; + connector->encoder->crtc = save_crtcs[count++]; + } fail_no_encoder: kfree(save_crtcs); count = 0; diff --git a/drivers/gpu/drm/drm_fops.c b/drivers/gpu/drm/drm_fops.c index b06a53715853..6c020fe5431c 100644 --- a/drivers/gpu/drm/drm_fops.c +++ b/drivers/gpu/drm/drm_fops.c @@ -457,6 +457,9 @@ int drm_release(struct inode *inode, struct file *filp) if (dev->driver->driver_features & DRIVER_GEM) drm_gem_release(dev, file_priv); + if (dev->driver->driver_features & DRIVER_MODESET) + drm_fb_release(file_priv); + mutex_lock(&dev->ctxlist_mutex); if (!list_empty(&dev->ctxlist)) { struct drm_ctx_list *pos, *n; diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c index 6915fb82d0b0..88d3368ffddd 100644 --- a/drivers/gpu/drm/drm_gem.c +++ b/drivers/gpu/drm/drm_gem.c @@ -104,8 +104,8 @@ drm_gem_init(struct drm_device *dev) if (drm_mm_init(&mm->offset_manager, DRM_FILE_PAGE_OFFSET_START, DRM_FILE_PAGE_OFFSET_SIZE)) { - drm_free(mm, sizeof(struct drm_gem_mm), DRM_MEM_MM); drm_ht_remove(&mm->offset_hash); + drm_free(mm, sizeof(struct drm_gem_mm), DRM_MEM_MM); return -ENOMEM; } @@ -295,35 +295,37 @@ drm_gem_flink_ioctl(struct drm_device *dev, void *data, return -EBADF; again: - if (idr_pre_get(&dev->object_name_idr, GFP_KERNEL) == 0) - return -ENOMEM; + if (idr_pre_get(&dev->object_name_idr, GFP_KERNEL) == 0) { + ret = -ENOMEM; + goto err; + } spin_lock(&dev->object_name_lock); - if (obj->name) { - args->name = obj->name; + if (!obj->name) { + ret = idr_get_new_above(&dev->object_name_idr, obj, 1, + &obj->name); + args->name = (uint64_t) obj->name; spin_unlock(&dev->object_name_lock); - return 0; - } - ret = idr_get_new_above(&dev->object_name_idr, obj, 1, - &obj->name); - spin_unlock(&dev->object_name_lock); - if (ret == -EAGAIN) - goto again; - if (ret != 0) { - mutex_lock(&dev->struct_mutex); - drm_gem_object_unreference(obj); - mutex_unlock(&dev->struct_mutex); - return ret; - } + if (ret == -EAGAIN) + goto again; - /* - * Leave the reference from the lookup around as the - * name table now holds one - */ - args->name = (uint64_t) obj->name; + if (ret != 0) + goto err; - return 0; + /* Allocate a reference for the name table. */ + drm_gem_object_reference(obj); + } else { + args->name = (uint64_t) obj->name; + spin_unlock(&dev->object_name_lock); + ret = 0; + } + +err: + mutex_lock(&dev->struct_mutex); + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); + return ret; } /** @@ -448,6 +450,7 @@ drm_gem_object_handle_free(struct kref *kref) spin_lock(&dev->object_name_lock); if (obj->name) { idr_remove(&dev->object_name_idr, obj->name); + obj->name = 0; spin_unlock(&dev->object_name_lock); /* * The object name held a reference to this object, drop @@ -460,6 +463,26 @@ drm_gem_object_handle_free(struct kref *kref) } EXPORT_SYMBOL(drm_gem_object_handle_free); +void drm_gem_vm_open(struct vm_area_struct *vma) +{ + struct drm_gem_object *obj = vma->vm_private_data; + + drm_gem_object_reference(obj); +} +EXPORT_SYMBOL(drm_gem_vm_open); + +void drm_gem_vm_close(struct vm_area_struct *vma) +{ + struct drm_gem_object *obj = vma->vm_private_data; + struct drm_device *dev = obj->dev; + + mutex_lock(&dev->struct_mutex); + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); +} +EXPORT_SYMBOL(drm_gem_vm_close); + + /** * drm_gem_mmap - memory map routine for GEM objects * @filp: DRM file pointer @@ -521,6 +544,14 @@ int drm_gem_mmap(struct file *filp, struct vm_area_struct *vma) #endif vma->vm_page_prot = __pgprot(prot); + /* Take a ref for this mapping of the object, so that the fault + * handler can dereference the mmap offset's pointer to the object. + * This reference is cleaned up by the corresponding vm_close + * (which should happen whether the vma was created by this call, or + * by a vm_open due to mremap or partial unmap or whatever). + */ + drm_gem_object_reference(obj); + vma->vm_file = filp; /* Needed for drm_vm_open() */ drm_vm_open_locked(vma); diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index aac12ee31a46..a31cbdbc3c54 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -94,6 +94,8 @@ static int i915_resume(struct drm_device *dev) static struct vm_operations_struct i915_gem_vm_ops = { .fault = i915_gem_fault, + .open = drm_gem_vm_open, + .close = drm_gem_vm_close, }; static struct drm_driver driver = { diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 7325363164f8..135a08f615cd 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -184,6 +184,8 @@ typedef struct drm_i915_private { unsigned int lvds_dither:1; unsigned int lvds_vbt:1; unsigned int int_crt_support:1; + unsigned int lvds_use_ssc:1; + int lvds_ssc_freq; struct drm_i915_fence_reg fence_regs[16]; /* assume 965 */ int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */ diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 818576654092..ac534c9a2f81 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -607,8 +607,6 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) case -EAGAIN: return VM_FAULT_OOM; case -EFAULT: - case -EBUSY: - DRM_ERROR("can't insert pfn?? fault or busy...\n"); return VM_FAULT_SIGBUS; default: return VM_FAULT_NOPAGE; @@ -684,6 +682,30 @@ out_free_list: return ret; } +static void +i915_gem_free_mmap_offset(struct drm_gem_object *obj) +{ + struct drm_device *dev = obj->dev; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + struct drm_gem_mm *mm = dev->mm_private; + struct drm_map_list *list; + + list = &obj->map_list; + drm_ht_remove_item(&mm->offset_hash, &list->hash); + + if (list->file_offset_node) { + drm_mm_put_block(list->file_offset_node); + list->file_offset_node = NULL; + } + + if (list->map) { + drm_free(list->map, sizeof(struct drm_map), DRM_MEM_DRIVER); + list->map = NULL; + } + + obj_priv->mmap_offset = 0; +} + /** * i915_gem_get_gtt_alignment - return required GTT alignment for an object * @obj: object to check @@ -758,8 +780,11 @@ i915_gem_mmap_gtt_ioctl(struct drm_device *dev, void *data, if (!obj_priv->mmap_offset) { ret = i915_gem_create_mmap_offset(obj); - if (ret) + if (ret) { + drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); return ret; + } } args->offset = obj_priv->mmap_offset; @@ -2251,6 +2276,8 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj, (int) reloc.offset, reloc.read_domains, reloc.write_domain); + drm_gem_object_unreference(target_obj); + i915_gem_object_unpin(obj); return -EINVAL; } @@ -2480,13 +2507,15 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, if (dev_priv->mm.wedged) { DRM_ERROR("Execbuf while wedged\n"); mutex_unlock(&dev->struct_mutex); - return -EIO; + ret = -EIO; + goto pre_mutex_err; } if (dev_priv->mm.suspended) { DRM_ERROR("Execbuf while VT-switched.\n"); mutex_unlock(&dev->struct_mutex); - return -EBUSY; + ret = -EBUSY; + goto pre_mutex_err; } /* Look up object handles */ @@ -2632,15 +2661,6 @@ i915_gem_execbuffer(struct drm_device *dev, void *data, i915_verify_inactive(dev, __FILE__, __LINE__); - /* Copy the new buffer offsets back to the user's exec list. */ - ret = copy_to_user((struct drm_i915_relocation_entry __user *) - (uintptr_t) args->buffers_ptr, - exec_list, - sizeof(*exec_list) * args->buffer_count); - if (ret) - DRM_ERROR("failed to copy %d exec entries " - "back to user (%d)\n", - args->buffer_count, ret); err: for (i = 0; i < pinned; i++) i915_gem_object_unpin(object_list[i]); @@ -2650,6 +2670,18 @@ err: mutex_unlock(&dev->struct_mutex); + if (!ret) { + /* Copy the new buffer offsets back to the user's exec list. */ + ret = copy_to_user((struct drm_i915_relocation_entry __user *) + (uintptr_t) args->buffers_ptr, + exec_list, + sizeof(*exec_list) * args->buffer_count); + if (ret) + DRM_ERROR("failed to copy %d exec entries " + "back to user (%d)\n", + args->buffer_count, ret); + } + pre_mutex_err: drm_free(object_list, sizeof(*object_list) * args->buffer_count, DRM_MEM_DRIVER); @@ -2753,6 +2785,7 @@ i915_gem_pin_ioctl(struct drm_device *dev, void *data, if (obj_priv->pin_filp != NULL && obj_priv->pin_filp != file_priv) { DRM_ERROR("Already pinned in i915_gem_pin_ioctl(): %d\n", args->handle); + drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); return -EINVAL; } @@ -2885,9 +2918,6 @@ int i915_gem_init_object(struct drm_gem_object *obj) void i915_gem_free_object(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; - struct drm_gem_mm *mm = dev->mm_private; - struct drm_map_list *list; - struct drm_map *map; struct drm_i915_gem_object *obj_priv = obj->driver_private; while (obj_priv->pin_count > 0) @@ -2898,19 +2928,7 @@ void i915_gem_free_object(struct drm_gem_object *obj) i915_gem_object_unbind(obj); - list = &obj->map_list; - drm_ht_remove_item(&mm->offset_hash, &list->hash); - - if (list->file_offset_node) { - drm_mm_put_block(list->file_offset_node); - list->file_offset_node = NULL; - } - - map = list->map; - if (map) { - drm_free(map, sizeof(*map), DRM_MEM_DRIVER); - list->map = NULL; - } + i915_gem_free_mmap_offset(obj); drm_free(obj_priv->page_cpu_valid, 1, DRM_MEM_DRIVER); drm_free(obj->driver_private, 1, DRM_MEM_DRIVER); @@ -3095,6 +3113,7 @@ i915_gem_init_hws(struct drm_device *dev) if (dev_priv->hw_status_page == NULL) { DRM_ERROR("Failed to map status page.\n"); memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map)); + i915_gem_object_unpin(obj); drm_gem_object_unreference(obj); return -EINVAL; } @@ -3107,6 +3126,27 @@ i915_gem_init_hws(struct drm_device *dev) return 0; } +static void +i915_gem_cleanup_hws(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + struct drm_gem_object *obj = dev_priv->hws_obj; + struct drm_i915_gem_object *obj_priv = obj->driver_private; + + if (dev_priv->hws_obj == NULL) + return; + + kunmap(obj_priv->page_list[0]); + i915_gem_object_unpin(obj); + drm_gem_object_unreference(obj); + dev_priv->hws_obj = NULL; + memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map)); + dev_priv->hw_status_page = NULL; + + /* Write high address into HWS_PGA when disabling. */ + I915_WRITE(HWS_PGA, 0x1ffff000); +} + int i915_gem_init_ringbuffer(struct drm_device *dev) { @@ -3124,6 +3164,7 @@ i915_gem_init_ringbuffer(struct drm_device *dev) obj = drm_gem_object_alloc(dev, 128 * 1024); if (obj == NULL) { DRM_ERROR("Failed to allocate ringbuffer\n"); + i915_gem_cleanup_hws(dev); return -ENOMEM; } obj_priv = obj->driver_private; @@ -3131,6 +3172,7 @@ i915_gem_init_ringbuffer(struct drm_device *dev) ret = i915_gem_object_pin(obj, 4096); if (ret != 0) { drm_gem_object_unreference(obj); + i915_gem_cleanup_hws(dev); return ret; } @@ -3148,7 +3190,9 @@ i915_gem_init_ringbuffer(struct drm_device *dev) if (ring->map.handle == NULL) { DRM_ERROR("Failed to map ringbuffer.\n"); memset(&dev_priv->ring, 0, sizeof(dev_priv->ring)); + i915_gem_object_unpin(obj); drm_gem_object_unreference(obj); + i915_gem_cleanup_hws(dev); return -EINVAL; } ring->ring_obj = obj; @@ -3228,20 +3272,7 @@ i915_gem_cleanup_ringbuffer(struct drm_device *dev) dev_priv->ring.ring_obj = NULL; memset(&dev_priv->ring, 0, sizeof(dev_priv->ring)); - if (dev_priv->hws_obj != NULL) { - struct drm_gem_object *obj = dev_priv->hws_obj; - struct drm_i915_gem_object *obj_priv = obj->driver_private; - - kunmap(obj_priv->page_list[0]); - i915_gem_object_unpin(obj); - drm_gem_object_unreference(obj); - dev_priv->hws_obj = NULL; - memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map)); - dev_priv->hw_status_page = NULL; - - /* Write high address into HWS_PGA when disabling. */ - I915_WRITE(HWS_PGA, 0x1ffff000); - } + i915_gem_cleanup_hws(dev); } int diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c index fa1685cba840..7fb4191ef934 100644 --- a/drivers/gpu/drm/i915/i915_gem_tiling.c +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c @@ -299,9 +299,8 @@ i915_gem_set_tiling(struct drm_device *dev, void *data, } obj_priv->stride = args->stride; - mutex_unlock(&dev->struct_mutex); - drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); return 0; } @@ -340,9 +339,8 @@ i915_gem_get_tiling(struct drm_device *dev, void *data, DRM_ERROR("unknown tiling mode\n"); } - mutex_unlock(&dev->struct_mutex); - drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); return 0; } diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index 4ca82a025525..65be30dccc77 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -135,6 +135,14 @@ parse_general_features(struct drm_i915_private *dev_priv, if (general) { dev_priv->int_tv_support = general->int_tv_support; dev_priv->int_crt_support = general->int_crt_support; + dev_priv->lvds_use_ssc = general->enable_ssc; + + if (dev_priv->lvds_use_ssc) { + if (IS_I855(dev_priv->dev)) + dev_priv->lvds_ssc_freq = general->ssc_freq ? 66 : 48; + else + dev_priv->lvds_ssc_freq = general->ssc_freq ? 100 : 96; + } } } diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index bbdd72909a11..4d2baf7b00be 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -90,12 +90,12 @@ typedef struct { #define I9XX_DOT_MAX 400000 #define I9XX_VCO_MIN 1400000 #define I9XX_VCO_MAX 2800000 -#define I9XX_N_MIN 3 -#define I9XX_N_MAX 8 +#define I9XX_N_MIN 1 +#define I9XX_N_MAX 6 #define I9XX_M_MIN 70 #define I9XX_M_MAX 120 #define I9XX_M1_MIN 10 -#define I9XX_M1_MAX 20 +#define I9XX_M1_MAX 22 #define I9XX_M2_MIN 5 #define I9XX_M2_MAX 9 #define I9XX_P_SDVO_DAC_MIN 5 @@ -189,9 +189,7 @@ static const intel_limit_t *intel_limit(struct drm_crtc *crtc) return limit; } -/** Derive the pixel clock for the given refclk and divisors for 8xx chips. */ - -static void i8xx_clock(int refclk, intel_clock_t *clock) +static void intel_clock(int refclk, intel_clock_t *clock) { clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); clock->p = clock->p1 * clock->p2; @@ -199,25 +197,6 @@ static void i8xx_clock(int refclk, intel_clock_t *clock) clock->dot = clock->vco / clock->p; } -/** Derive the pixel clock for the given refclk and divisors for 9xx chips. */ - -static void i9xx_clock(int refclk, intel_clock_t *clock) -{ - clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); - clock->p = clock->p1 * clock->p2; - clock->vco = refclk * clock->m / (clock->n + 2); - clock->dot = clock->vco / clock->p; -} - -static void intel_clock(struct drm_device *dev, int refclk, - intel_clock_t *clock) -{ - if (IS_I9XX(dev)) - i9xx_clock (refclk, clock); - else - i8xx_clock (refclk, clock); -} - /** * Returns whether any output on the specified pipe is of the specified type */ @@ -238,7 +217,7 @@ bool intel_pipe_has_type (struct drm_crtc *crtc, int type) return false; } -#define INTELPllInvalid(s) { /* ErrorF (s) */; return false; } +#define INTELPllInvalid(s) do { DRM_DEBUG(s); return false; } while (0) /** * Returns whether the given set of divisors are valid for a given refclk with * the given connectors. @@ -318,7 +297,7 @@ static bool intel_find_best_PLL(struct drm_crtc *crtc, int target, clock.p1 <= limit->p1.max; clock.p1++) { int this_err; - intel_clock(dev, refclk, &clock); + intel_clock(refclk, &clock); if (!intel_PLL_is_valid(crtc, &clock)) continue; @@ -343,7 +322,7 @@ intel_wait_for_vblank(struct drm_device *dev) udelay(20000); } -static void +static int intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, struct drm_framebuffer *old_fb) { @@ -361,11 +340,21 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE; int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR; u32 dspcntr, alignment; + int ret; /* no fb bound */ if (!crtc->fb) { DRM_DEBUG("No FB bound\n"); - return; + return 0; + } + + switch (pipe) { + case 0: + case 1: + break; + default: + DRM_ERROR("Can't update pipe %d in SAREA\n", pipe); + return -EINVAL; } intel_fb = to_intel_framebuffer(crtc->fb); @@ -377,28 +366,30 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, alignment = 64 * 1024; break; case I915_TILING_X: - if (IS_I9XX(dev)) - alignment = 1024 * 1024; - else - alignment = 512 * 1024; + /* pin() will align the object as required by fence */ + alignment = 0; break; case I915_TILING_Y: /* FIXME: Is this true? */ DRM_ERROR("Y tiled not allowed for scan out buffers\n"); - return; + return -EINVAL; default: BUG(); } - if (i915_gem_object_pin(intel_fb->obj, alignment)) - return; - - i915_gem_object_set_to_gtt_domain(intel_fb->obj, 1); - - Start = obj_priv->gtt_offset; - Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8); + mutex_lock(&dev->struct_mutex); + ret = i915_gem_object_pin(intel_fb->obj, alignment); + if (ret != 0) { + mutex_unlock(&dev->struct_mutex); + return ret; + } - I915_WRITE(dspstride, crtc->fb->pitch); + ret = i915_gem_object_set_to_gtt_domain(intel_fb->obj, 1); + if (ret != 0) { + i915_gem_object_unpin(intel_fb->obj); + mutex_unlock(&dev->struct_mutex); + return ret; + } dspcntr = I915_READ(dspcntr_reg); /* Mask out pixel format bits in case we change it */ @@ -419,11 +410,17 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, break; default: DRM_ERROR("Unknown color depth\n"); - return; + i915_gem_object_unpin(intel_fb->obj); + mutex_unlock(&dev->struct_mutex); + return -EINVAL; } I915_WRITE(dspcntr_reg, dspcntr); + Start = obj_priv->gtt_offset; + Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8); + DRM_DEBUG("Writing base %08lX %08lX %d %d\n", Start, Offset, x, y); + I915_WRITE(dspstride, crtc->fb->pitch); if (IS_I965G(dev)) { I915_WRITE(dspbase, Offset); I915_READ(dspbase); @@ -440,27 +437,24 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, intel_fb = to_intel_framebuffer(old_fb); i915_gem_object_unpin(intel_fb->obj); } + mutex_unlock(&dev->struct_mutex); if (!dev->primary->master) - return; + return 0; master_priv = dev->primary->master->driver_priv; if (!master_priv->sarea_priv) - return; + return 0; - switch (pipe) { - case 0: - master_priv->sarea_priv->pipeA_x = x; - master_priv->sarea_priv->pipeA_y = y; - break; - case 1: + if (pipe) { master_priv->sarea_priv->pipeB_x = x; master_priv->sarea_priv->pipeB_y = y; - break; - default: - DRM_ERROR("Can't update pipe %d in SAREA\n", pipe); - break; + } else { + master_priv->sarea_priv->pipeA_x = x; + master_priv->sarea_priv->pipeA_y = y; } + + return 0; } @@ -708,11 +702,11 @@ static int intel_panel_fitter_pipe (struct drm_device *dev) return 1; } -static void intel_crtc_mode_set(struct drm_crtc *crtc, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode, - int x, int y, - struct drm_framebuffer *old_fb) +static int intel_crtc_mode_set(struct drm_crtc *crtc, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, + int x, int y, + struct drm_framebuffer *old_fb) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -732,13 +726,14 @@ static void intel_crtc_mode_set(struct drm_crtc *crtc, int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE; int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS; int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC; - int refclk; + int refclk, num_outputs = 0; intel_clock_t clock; u32 dpll = 0, fp = 0, dspcntr, pipeconf; bool ok, is_sdvo = false, is_dvo = false; bool is_crt = false, is_lvds = false, is_tv = false; struct drm_mode_config *mode_config = &dev->mode_config; struct drm_connector *connector; + int ret; drm_vblank_pre_modeset(dev, pipe); @@ -768,9 +763,14 @@ static void intel_crtc_mode_set(struct drm_crtc *crtc, is_crt = true; break; } + + num_outputs++; } - if (IS_I9XX(dev)) { + if (is_lvds && dev_priv->lvds_use_ssc && num_outputs < 2) { + refclk = dev_priv->lvds_ssc_freq * 1000; + DRM_DEBUG("using SSC reference clock of %d MHz\n", refclk / 1000); + } else if (IS_I9XX(dev)) { refclk = 96000; } else { refclk = 48000; @@ -779,7 +779,7 @@ static void intel_crtc_mode_set(struct drm_crtc *crtc, ok = intel_find_best_PLL(crtc, adjusted_mode->clock, refclk, &clock); if (!ok) { DRM_ERROR("Couldn't find PLL settings for mode!\n"); - return; + return -EINVAL; } fp = clock.n << 16 | clock.m1 << 8 | clock.m2; @@ -829,11 +829,14 @@ static void intel_crtc_mode_set(struct drm_crtc *crtc, } } - if (is_tv) { + if (is_sdvo && is_tv) + dpll |= PLL_REF_INPUT_TVCLKINBC; + else if (is_tv) /* XXX: just matching BIOS for now */ -/* dpll |= PLL_REF_INPUT_TVCLKINBC; */ + /* dpll |= PLL_REF_INPUT_TVCLKINBC; */ dpll |= 3; - } + else if (is_lvds && dev_priv->lvds_use_ssc && num_outputs < 2) + dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; else dpll |= PLL_REF_INPUT_DREFCLK; @@ -950,9 +953,13 @@ static void intel_crtc_mode_set(struct drm_crtc *crtc, I915_WRITE(dspcntr_reg, dspcntr); /* Flush the plane changes */ - intel_pipe_set_base(crtc, x, y, old_fb); + ret = intel_pipe_set_base(crtc, x, y, old_fb); + if (ret != 0) + return ret; drm_vblank_post_modeset(dev, pipe); + + return 0; } /** Loads the palette/gamma unit for the CRTC with the prepared values */ @@ -1023,18 +1030,19 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, } /* we only need to pin inside GTT if cursor is non-phy */ + mutex_lock(&dev->struct_mutex); if (!dev_priv->cursor_needs_physical) { ret = i915_gem_object_pin(bo, PAGE_SIZE); if (ret) { DRM_ERROR("failed to pin cursor bo\n"); - goto fail; + goto fail_locked; } addr = obj_priv->gtt_offset; } else { ret = i915_gem_attach_phys_object(dev, bo, (pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1); if (ret) { DRM_ERROR("failed to attach phys object\n"); - goto fail; + goto fail_locked; } addr = obj_priv->phys_obj->handle->busaddr; } @@ -1054,10 +1062,9 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo); } else i915_gem_object_unpin(intel_crtc->cursor_bo); - mutex_lock(&dev->struct_mutex); drm_gem_object_unreference(intel_crtc->cursor_bo); - mutex_unlock(&dev->struct_mutex); } + mutex_unlock(&dev->struct_mutex); intel_crtc->cursor_addr = addr; intel_crtc->cursor_bo = bo; @@ -1065,6 +1072,7 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, return 0; fail: mutex_lock(&dev->struct_mutex); +fail_locked: drm_gem_object_unreference(bo); mutex_unlock(&dev->struct_mutex); return ret; @@ -1292,7 +1300,7 @@ static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc) } /* XXX: Handle the 100Mhz refclk */ - i9xx_clock(96000, &clock); + intel_clock(96000, &clock); } else { bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN); @@ -1304,9 +1312,9 @@ static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc) if ((dpll & PLL_REF_INPUT_MASK) == PLLB_REF_INPUT_SPREADSPECTRUMIN) { /* XXX: might not be 66MHz */ - i8xx_clock(66000, &clock); + intel_clock(66000, &clock); } else - i8xx_clock(48000, &clock); + intel_clock(48000, &clock); } else { if (dpll & PLL_P1_DIVIDE_BY_TWO) clock.p1 = 2; @@ -1319,7 +1327,7 @@ static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc) else clock.p2 = 2; - i8xx_clock(48000, &clock); + intel_clock(48000, &clock); } } @@ -1598,7 +1606,9 @@ intel_user_framebuffer_create(struct drm_device *dev, ret = intel_framebuffer_create(dev, mode_cmd, &fb, obj); if (ret) { + mutex_lock(&dev->struct_mutex); drm_gem_object_unreference(obj); + mutex_unlock(&dev->struct_mutex); return NULL; } diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index afd1217b8a02..b7f0ebe9f810 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -473,7 +473,7 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width, ret = intel_framebuffer_create(dev, &mode_cmd, &fb, fbo); if (ret) { DRM_ERROR("failed to allocate fb.\n"); - goto out_unref; + goto out_unpin; } list_add(&fb->filp_head, &dev->mode_config.fb_kernel_list); @@ -484,7 +484,7 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width, info = framebuffer_alloc(sizeof(struct intelfb_par), device); if (!info) { ret = -ENOMEM; - goto out_unref; + goto out_unpin; } par = info->par; @@ -513,7 +513,7 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width, size); if (!info->screen_base) { ret = -ENOSPC; - goto out_unref; + goto out_unpin; } info->screen_size = size; @@ -608,6 +608,8 @@ static int intelfb_create(struct drm_device *dev, uint32_t fb_width, mutex_unlock(&dev->struct_mutex); return 0; +out_unpin: + i915_gem_object_unpin(fbo); out_unref: drm_gem_object_unreference(fbo); mutex_unlock(&dev->struct_mutex); diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 6d4f91265354..0d211af98854 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -481,8 +481,6 @@ void intel_lvds_init(struct drm_device *dev) if (dev_priv->panel_fixed_mode) { dev_priv->panel_fixed_mode->type |= DRM_MODE_TYPE_PREFERRED; - drm_mode_probed_add(connector, - dev_priv->panel_fixed_mode); goto out; } } diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index a30508b639ba..fbe6f3931b1b 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -193,7 +193,7 @@ static bool intel_sdvo_write_byte(struct intel_output *intel_output, int addr, #define SDVO_CMD_NAME_ENTRY(cmd) {cmd, #cmd} /** Mapping of command numbers to names, for debug output */ -const static struct _sdvo_cmd_name { +static const struct _sdvo_cmd_name { u8 cmd; char *name; } sdvo_cmd_names[] = { diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c index fbb35dc56f5c..56485d67369b 100644 --- a/drivers/gpu/drm/i915/intel_tv.c +++ b/drivers/gpu/drm/i915/intel_tv.c @@ -411,7 +411,7 @@ struct tv_mode { * These values account for -1s required. */ -const static struct tv_mode tv_modes[] = { +static const struct tv_mode tv_modes[] = { { .name = "NTSC-M", .clock = 107520, diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c index df4cf97e5d97..92965dbb3c14 100644 --- a/drivers/gpu/drm/radeon/radeon_cp.c +++ b/drivers/gpu/drm/radeon/radeon_cp.c @@ -557,8 +557,10 @@ static int radeon_do_engine_reset(struct drm_device * dev) } static void radeon_cp_init_ring_buffer(struct drm_device * dev, - drm_radeon_private_t * dev_priv) + drm_radeon_private_t *dev_priv, + struct drm_file *file_priv) { + struct drm_radeon_master_private *master_priv; u32 ring_start, cur_read_ptr; u32 tmp; @@ -677,6 +679,14 @@ static void radeon_cp_init_ring_buffer(struct drm_device * dev, dev_priv->scratch[2] = 0; RADEON_WRITE(RADEON_LAST_CLEAR_REG, 0); + /* reset sarea copies of these */ + master_priv = file_priv->master->driver_priv; + if (master_priv->sarea_priv) { + master_priv->sarea_priv->last_frame = 0; + master_priv->sarea_priv->last_dispatch = 0; + master_priv->sarea_priv->last_clear = 0; + } + radeon_do_wait_for_idle(dev_priv); /* Sync everything up */ @@ -1215,7 +1225,7 @@ static int radeon_do_init_cp(struct drm_device *dev, drm_radeon_init_t *init, } radeon_cp_load_microcode(dev_priv); - radeon_cp_init_ring_buffer(dev, dev_priv); + radeon_cp_init_ring_buffer(dev, dev_priv, file_priv); dev_priv->last_buf = 0; @@ -1281,7 +1291,7 @@ static int radeon_do_cleanup_cp(struct drm_device * dev) * * Charl P. Botha <http://cpbotha.net> */ -static int radeon_do_resume_cp(struct drm_device * dev) +static int radeon_do_resume_cp(struct drm_device *dev, struct drm_file *file_priv) { drm_radeon_private_t *dev_priv = dev->dev_private; @@ -1304,7 +1314,7 @@ static int radeon_do_resume_cp(struct drm_device * dev) } radeon_cp_load_microcode(dev_priv); - radeon_cp_init_ring_buffer(dev, dev_priv); + radeon_cp_init_ring_buffer(dev, dev_priv, file_priv); radeon_do_engine_reset(dev); radeon_irq_set_state(dev, RADEON_SW_INT_ENABLE, 1); @@ -1479,8 +1489,7 @@ int radeon_cp_idle(struct drm_device *dev, void *data, struct drm_file *file_pri */ int radeon_cp_resume(struct drm_device *dev, void *data, struct drm_file *file_priv) { - - return radeon_do_resume_cp(dev); + return radeon_do_resume_cp(dev, file_priv); } int radeon_engine_reset(struct drm_device *dev, void *data, struct drm_file *file_priv) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 6cad69ed21c5..1cc967448f4d 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1300,7 +1300,13 @@ static const struct hid_device_id hid_blacklist[] = { { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) }, { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_SUNPLUS, USB_DEVICE_ID_SUNPLUS_WDESKTOP) }, + { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) }, + { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb304) }, + { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) }, + { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) }, { HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) }, + { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) }, + { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, 0x030c) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_BT) }, @@ -1605,6 +1611,7 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0002) }, { HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0003) }, { HID_USB_DEVICE(USB_VENDOR_ID_PANJIT, 0x0004) }, + { HID_USB_DEVICE(USB_VENDOR_ID_POWERCOM, USB_DEVICE_ID_POWERCOM_UPS) }, { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD) }, { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD2) }, { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD3) }, @@ -1612,10 +1619,6 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD5) }, { HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY1) }, { HID_USB_DEVICE(USB_VENDOR_ID_TENX, USB_DEVICE_ID_TENX_IBUDDY2) }, - { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) }, - { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb304) }, - { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) }, - { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) }, { HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) }, { HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) }, { HID_USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) }, @@ -1626,8 +1629,6 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_8_8_4_IF_KIT) }, { HID_USB_DEVICE(USB_VENDOR_ID_YEALINK, USB_DEVICE_ID_YEALINK_P1K_P4K_B2K) }, - { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) }, - { HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) }, { } }; diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index e899f510ebeb..88511970508d 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -348,6 +348,9 @@ #define USB_VENDOR_ID_PLAYDOTCOM 0x0b43 #define USB_DEVICE_ID_PLAYDOTCOM_EMS_USBII 0x0003 +#define USB_VENDOR_ID_POWERCOM 0x0d9f +#define USB_DEVICE_ID_POWERCOM_UPS 0x0002 + #define USB_VENDOR_ID_SAITEK 0x06a3 #define USB_DEVICE_ID_SAITEK_RUMBLEPAD 0xff17 diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index 732449628971..02b19db5442e 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -267,8 +267,10 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd, default: { struct hid_device *hid = dev->hid; - if (_IOC_TYPE(cmd) != 'H' || _IOC_DIR(cmd) != _IOC_READ) - return -EINVAL; + if (_IOC_TYPE(cmd) != 'H' || _IOC_DIR(cmd) != _IOC_READ) { + ret = -EINVAL; + break; + } if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWNAME(0))) { int len; @@ -277,8 +279,9 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd, len = strlen(hid->name) + 1; if (len > _IOC_SIZE(cmd)) len = _IOC_SIZE(cmd); - return copy_to_user(user_arg, hid->name, len) ? + ret = copy_to_user(user_arg, hid->name, len) ? -EFAULT : len; + break; } if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWPHYS(0))) { @@ -288,12 +291,13 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd, len = strlen(hid->phys) + 1; if (len > _IOC_SIZE(cmd)) len = _IOC_SIZE(cmd); - return copy_to_user(user_arg, hid->phys, len) ? + ret = copy_to_user(user_arg, hid->phys, len) ? -EFAULT : len; + break; } } - ret = -ENOTTY; + ret = -ENOTTY; } unlock_kernel(); return ret; diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c index 609cafff86bc..5f81ddf71508 100644 --- a/drivers/hwmon/f71882fg.c +++ b/drivers/hwmon/f71882fg.c @@ -1872,7 +1872,7 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address, devid = superio_inw(sioaddr, SIO_REG_MANID); if (devid != SIO_FINTEK_ID) { - printk(KERN_INFO DRVNAME ": Not a Fintek device\n"); + pr_debug(DRVNAME ": Not a Fintek device\n"); goto exit; } @@ -1932,7 +1932,7 @@ static int __init f71882fg_device_add(unsigned short address, res.name = f71882fg_pdev->name; err = acpi_check_resource_conflict(&res); if (err) - return err; + goto exit_device_put; err = platform_device_add_resources(f71882fg_pdev, &res, 1); if (err) { diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c index abf4dfc8ec22..29c83b5b9697 100644 --- a/drivers/hwmon/hp_accel.c +++ b/drivers/hwmon/hp_accel.c @@ -166,6 +166,18 @@ static struct axis_conversion lis3lv02d_axis_xy_swap_yz_inverted = {2, -1, -3}; }, \ .driver_data = &lis3lv02d_axis_##_axis \ } + +#define AXIS_DMI_MATCH2(_ident, _class1, _name1, \ + _class2, _name2, \ + _axis) { \ + .ident = _ident, \ + .callback = lis3lv02d_dmi_matched, \ + .matches = { \ + DMI_MATCH(DMI_##_class1, _name1), \ + DMI_MATCH(DMI_##_class2, _name2), \ + }, \ + .driver_data = &lis3lv02d_axis_##_axis \ +} static struct dmi_system_id lis3lv02d_dmi_ids[] = { /* product names are truncated to match all kinds of a same model */ AXIS_DMI_MATCH("NC64x0", "HP Compaq nc64", x_inverted), @@ -179,6 +191,16 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = { AXIS_DMI_MATCH("NC673x", "HP Compaq 673", xy_rotated_left_usd), AXIS_DMI_MATCH("NC651xx", "HP Compaq 651", xy_rotated_right), AXIS_DMI_MATCH("NC671xx", "HP Compaq 671", xy_swap_yz_inverted), + /* Intel-based HP Pavilion dv5 */ + AXIS_DMI_MATCH2("HPDV5_I", + PRODUCT_NAME, "HP Pavilion dv5", + BOARD_NAME, "3603", + x_inverted), + /* AMD-based HP Pavilion dv5 */ + AXIS_DMI_MATCH2("HPDV5_A", + PRODUCT_NAME, "HP Pavilion dv5", + BOARD_NAME, "3600", + y_inverted), { NULL, } /* Laptop models without axis info (yet): * "NC6910" "HP Compaq 6910" @@ -213,9 +235,49 @@ static struct delayed_led_classdev hpled_led = { .set_brightness = hpled_set, }; +static acpi_status +lis3lv02d_get_resource(struct acpi_resource *resource, void *context) +{ + if (resource->type == ACPI_RESOURCE_TYPE_EXTENDED_IRQ) { + struct acpi_resource_extended_irq *irq; + u32 *device_irq = context; + + irq = &resource->data.extended_irq; + *device_irq = irq->interrupts[0]; + } + + return AE_OK; +} + +static void lis3lv02d_enum_resources(struct acpi_device *device) +{ + acpi_status status; + + status = acpi_walk_resources(device->handle, METHOD_NAME__CRS, + lis3lv02d_get_resource, &adev.irq); + if (ACPI_FAILURE(status)) + printk(KERN_DEBUG DRIVER_NAME ": Error getting resources\n"); +} + +static s16 lis3lv02d_read_16(acpi_handle handle, int reg) +{ + u8 lo, hi; + + adev.read(handle, reg - 1, &lo); + adev.read(handle, reg, &hi); + /* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */ + return (s16)((hi << 8) | lo); +} + +static s16 lis3lv02d_read_8(acpi_handle handle, int reg) +{ + s8 lo; + adev.read(handle, reg, &lo); + return lo; +} + static int lis3lv02d_add(struct acpi_device *device) { - u8 val; int ret; if (!device) @@ -229,10 +291,22 @@ static int lis3lv02d_add(struct acpi_device *device) strcpy(acpi_device_class(device), ACPI_MDPS_CLASS); device->driver_data = &adev; - lis3lv02d_acpi_read(device->handle, WHO_AM_I, &val); - if ((val != LIS3LV02DL_ID) && (val != LIS302DL_ID)) { + lis3lv02d_acpi_read(device->handle, WHO_AM_I, &adev.whoami); + switch (adev.whoami) { + case LIS_DOUBLE_ID: + printk(KERN_INFO DRIVER_NAME ": 2-byte sensor found\n"); + adev.read_data = lis3lv02d_read_16; + adev.mdps_max_val = 2048; + break; + case LIS_SINGLE_ID: + printk(KERN_INFO DRIVER_NAME ": 1-byte sensor found\n"); + adev.read_data = lis3lv02d_read_8; + adev.mdps_max_val = 128; + break; + default: printk(KERN_ERR DRIVER_NAME - ": Accelerometer chip not LIS3LV02D{L,Q}\n"); + ": unknown sensor type 0x%X\n", adev.whoami); + return -EINVAL; } /* If possible use a "standard" axes order */ @@ -247,6 +321,9 @@ static int lis3lv02d_add(struct acpi_device *device) if (ret) return ret; + /* obtain IRQ number of our device from ACPI */ + lis3lv02d_enum_resources(adev.device); + ret = lis3lv02d_init_device(&adev); if (ret) { flush_work(&hpled_led.work); diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c index 219d2d0d5a62..8bb2158f0453 100644 --- a/drivers/hwmon/lis3lv02d.c +++ b/drivers/hwmon/lis3lv02d.c @@ -3,7 +3,7 @@ * * Copyright (C) 2007-2008 Yan Burman * Copyright (C) 2008 Eric Piel - * Copyright (C) 2008 Pavel Machek + * Copyright (C) 2008-2009 Pavel Machek * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -35,6 +35,7 @@ #include <linux/poll.h> #include <linux/freezer.h> #include <linux/uaccess.h> +#include <linux/miscdevice.h> #include <acpi/acpi_drivers.h> #include <asm/atomic.h> #include "lis3lv02d.h" @@ -52,24 +53,14 @@ * joystick. */ -/* Maximum value our axis may get for the input device (signed 12 bits) */ -#define MDPS_MAX_VAL 2048 +struct acpi_lis3lv02d adev = { + .misc_wait = __WAIT_QUEUE_HEAD_INITIALIZER(adev.misc_wait), +}; -struct acpi_lis3lv02d adev; EXPORT_SYMBOL_GPL(adev); static int lis3lv02d_add_fs(struct acpi_device *device); -static s16 lis3lv02d_read_16(acpi_handle handle, int reg) -{ - u8 lo, hi; - - adev.read(handle, reg, &lo); - adev.read(handle, reg + 1, &hi); - /* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */ - return (s16)((hi << 8) | lo); -} - /** * lis3lv02d_get_axis - For the given axis, give the value converted * @axis: 1,2,3 - can also be negative @@ -98,9 +89,9 @@ static void lis3lv02d_get_xyz(acpi_handle handle, int *x, int *y, int *z) { int position[3]; - position[0] = lis3lv02d_read_16(handle, OUTX_L); - position[1] = lis3lv02d_read_16(handle, OUTY_L); - position[2] = lis3lv02d_read_16(handle, OUTZ_L); + position[0] = adev.read_data(handle, OUTX); + position[1] = adev.read_data(handle, OUTY); + position[2] = adev.read_data(handle, OUTZ); *x = lis3lv02d_get_axis(adev.ac.x, position); *y = lis3lv02d_get_axis(adev.ac.y, position); @@ -110,26 +101,13 @@ static void lis3lv02d_get_xyz(acpi_handle handle, int *x, int *y, int *z) void lis3lv02d_poweroff(acpi_handle handle) { adev.is_on = 0; - /* disable X,Y,Z axis and power down */ - adev.write(handle, CTRL_REG1, 0x00); } EXPORT_SYMBOL_GPL(lis3lv02d_poweroff); void lis3lv02d_poweron(acpi_handle handle) { - u8 val; - adev.is_on = 1; adev.init(handle); - adev.write(handle, FF_WU_CFG, 0); - /* - * BDU: LSB and MSB values are not updated until both have been read. - * So the value read will always be correct. - * IEN: Interrupt for free-fall and DD, not for data-ready. - */ - adev.read(handle, CTRL_REG2, &val); - val |= CTRL2_BDU | CTRL2_IEN; - adev.write(handle, CTRL_REG2, val); } EXPORT_SYMBOL_GPL(lis3lv02d_poweron); @@ -162,6 +140,140 @@ static void lis3lv02d_decrease_use(struct acpi_lis3lv02d *dev) mutex_unlock(&dev->lock); } +static irqreturn_t lis302dl_interrupt(int irq, void *dummy) +{ + /* + * Be careful: on some HP laptops the bios force DD when on battery and + * the lid is closed. This leads to interrupts as soon as a little move + * is done. + */ + atomic_inc(&adev.count); + + wake_up_interruptible(&adev.misc_wait); + kill_fasync(&adev.async_queue, SIGIO, POLL_IN); + return IRQ_HANDLED; +} + +static int lis3lv02d_misc_open(struct inode *inode, struct file *file) +{ + int ret; + + if (test_and_set_bit(0, &adev.misc_opened)) + return -EBUSY; /* already open */ + + atomic_set(&adev.count, 0); + + /* + * The sensor can generate interrupts for free-fall and direction + * detection (distinguishable with FF_WU_SRC and DD_SRC) but to keep + * the things simple and _fast_ we activate it only for free-fall, so + * no need to read register (very slow with ACPI). For the same reason, + * we forbid shared interrupts. + * + * IRQF_TRIGGER_RISING seems pointless on HP laptops because the + * io-apic is not configurable (and generates a warning) but I keep it + * in case of support for other hardware. + */ + ret = request_irq(adev.irq, lis302dl_interrupt, IRQF_TRIGGER_RISING, + DRIVER_NAME, &adev); + + if (ret) { + clear_bit(0, &adev.misc_opened); + printk(KERN_ERR DRIVER_NAME ": IRQ%d allocation failed\n", adev.irq); + return -EBUSY; + } + lis3lv02d_increase_use(&adev); + printk("lis3: registered interrupt %d\n", adev.irq); + return 0; +} + +static int lis3lv02d_misc_release(struct inode *inode, struct file *file) +{ + fasync_helper(-1, file, 0, &adev.async_queue); + lis3lv02d_decrease_use(&adev); + free_irq(adev.irq, &adev); + clear_bit(0, &adev.misc_opened); /* release the device */ + return 0; +} + +static ssize_t lis3lv02d_misc_read(struct file *file, char __user *buf, + size_t count, loff_t *pos) +{ + DECLARE_WAITQUEUE(wait, current); + u32 data; + unsigned char byte_data; + ssize_t retval = 1; + + if (count < 1) + return -EINVAL; + + add_wait_queue(&adev.misc_wait, &wait); + while (true) { + set_current_state(TASK_INTERRUPTIBLE); + data = atomic_xchg(&adev.count, 0); + if (data) + break; + + if (file->f_flags & O_NONBLOCK) { + retval = -EAGAIN; + goto out; + } + + if (signal_pending(current)) { + retval = -ERESTARTSYS; + goto out; + } + + schedule(); + } + + if (data < 255) + byte_data = data; + else + byte_data = 255; + + /* make sure we are not going into copy_to_user() with + * TASK_INTERRUPTIBLE state */ + set_current_state(TASK_RUNNING); + if (copy_to_user(buf, &byte_data, sizeof(byte_data))) + retval = -EFAULT; + +out: + __set_current_state(TASK_RUNNING); + remove_wait_queue(&adev.misc_wait, &wait); + + return retval; +} + +static unsigned int lis3lv02d_misc_poll(struct file *file, poll_table *wait) +{ + poll_wait(file, &adev.misc_wait, wait); + if (atomic_read(&adev.count)) + return POLLIN | POLLRDNORM; + return 0; +} + +static int lis3lv02d_misc_fasync(int fd, struct file *file, int on) +{ + return fasync_helper(fd, file, on, &adev.async_queue); +} + +static const struct file_operations lis3lv02d_misc_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .read = lis3lv02d_misc_read, + .open = lis3lv02d_misc_open, + .release = lis3lv02d_misc_release, + .poll = lis3lv02d_misc_poll, + .fasync = lis3lv02d_misc_fasync, +}; + +static struct miscdevice lis3lv02d_misc_device = { + .minor = MISC_DYNAMIC_MINOR, + .name = "freefall", + .fops = &lis3lv02d_misc_fops, +}; + /** * lis3lv02d_joystick_kthread - Kthread polling function * @data: unused - here to conform to threadfn prototype @@ -203,7 +315,6 @@ static void lis3lv02d_joystick_close(struct input_dev *input) lis3lv02d_decrease_use(&adev); } - static inline void lis3lv02d_calibrate_joystick(void) { lis3lv02d_get_xyz(adev.device->handle, &adev.xcalib, &adev.ycalib, &adev.zcalib); @@ -231,9 +342,9 @@ int lis3lv02d_joystick_enable(void) adev.idev->close = lis3lv02d_joystick_close; set_bit(EV_ABS, adev.idev->evbit); - input_set_abs_params(adev.idev, ABS_X, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3); - input_set_abs_params(adev.idev, ABS_Y, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3); - input_set_abs_params(adev.idev, ABS_Z, -MDPS_MAX_VAL, MDPS_MAX_VAL, 3, 3); + input_set_abs_params(adev.idev, ABS_X, -adev.mdps_max_val, adev.mdps_max_val, 3, 3); + input_set_abs_params(adev.idev, ABS_Y, -adev.mdps_max_val, adev.mdps_max_val, 3, 3); + input_set_abs_params(adev.idev, ABS_Z, -adev.mdps_max_val, adev.mdps_max_val, 3, 3); err = input_register_device(adev.idev); if (err) { @@ -250,6 +361,7 @@ void lis3lv02d_joystick_disable(void) if (!adev.idev) return; + misc_deregister(&lis3lv02d_misc_device); input_unregister_device(adev.idev); adev.idev = NULL; } @@ -268,6 +380,19 @@ int lis3lv02d_init_device(struct acpi_lis3lv02d *dev) if (lis3lv02d_joystick_enable()) printk(KERN_ERR DRIVER_NAME ": joystick initialization failed\n"); + printk("lis3_init_device: irq %d\n", dev->irq); + + /* if we did not get an IRQ from ACPI - we have nothing more to do */ + if (!dev->irq) { + printk(KERN_ERR DRIVER_NAME + ": No IRQ in ACPI. Disabling /dev/freefall\n"); + goto out; + } + + printk("lis3: registering device\n"); + if (misc_register(&lis3lv02d_misc_device)) + printk(KERN_ERR DRIVER_NAME ": misc_register failed\n"); +out: lis3lv02d_decrease_use(dev); return 0; } @@ -351,6 +476,6 @@ int lis3lv02d_remove_fs(void) EXPORT_SYMBOL_GPL(lis3lv02d_remove_fs); MODULE_DESCRIPTION("ST LIS3LV02Dx three-axis digital accelerometer driver"); -MODULE_AUTHOR("Yan Burman and Eric Piel"); +MODULE_AUTHOR("Yan Burman, Eric Piel, Pavel Machek"); MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/lis3lv02d.h b/drivers/hwmon/lis3lv02d.h index 223f1c0763bb..75972bf372ff 100644 --- a/drivers/hwmon/lis3lv02d.h +++ b/drivers/hwmon/lis3lv02d.h @@ -22,12 +22,15 @@ /* * The actual chip is STMicroelectronics LIS3LV02DL or LIS3LV02DQ that seems to * be connected via SPI. There exists also several similar chips (such as LIS302DL or - * LIS3L02DQ) but not in the HP laptops and they have slightly different registers. + * LIS3L02DQ) and they have slightly different registers, but we can provide a + * common interface for all of them. * They can also be connected via I²C. */ -#define LIS3LV02DL_ID 0x3A /* Also the LIS3LV02DQ */ -#define LIS302DL_ID 0x3B /* Also the LIS202DL! */ +/* 2-byte registers */ +#define LIS_DOUBLE_ID 0x3A /* LIS3LV02D[LQ] */ +/* 1-byte registers */ +#define LIS_SINGLE_ID 0x3B /* LIS[32]02DL and others */ enum lis3lv02d_reg { WHO_AM_I = 0x0F, @@ -44,10 +47,13 @@ enum lis3lv02d_reg { STATUS_REG = 0x27, OUTX_L = 0x28, OUTX_H = 0x29, + OUTX = 0x29, OUTY_L = 0x2A, OUTY_H = 0x2B, + OUTY = 0x2B, OUTZ_L = 0x2C, OUTZ_H = 0x2D, + OUTZ = 0x2D, FF_WU_CFG = 0x30, FF_WU_SRC = 0x31, FF_WU_ACK = 0x32, @@ -159,6 +165,10 @@ struct acpi_lis3lv02d { acpi_status (*write) (acpi_handle handle, int reg, u8 val); acpi_status (*read) (acpi_handle handle, int reg, u8 *ret); + u8 whoami; /* 3Ah: 2-byte registries, 3Bh: 1-byte registries */ + s16 (*read_data) (acpi_handle handle, int reg); + int mdps_max_val; + struct input_dev *idev; /* input device */ struct task_struct *kthread; /* kthread for input */ struct mutex lock; @@ -170,6 +180,11 @@ struct acpi_lis3lv02d { unsigned char is_on; /* whether the device is on or off */ unsigned char usage; /* usage counter */ struct axis_conversion ac; /* hw -> logical axis */ + + u32 irq; /* IRQ number */ + struct fasync_struct *async_queue; /* queue for the misc device */ + wait_queue_head_t misc_wait; /* Wait queue for the misc device */ + unsigned long misc_opened; /* bit0: whether the device is open */ }; int lis3lv02d_init_device(struct acpi_lis3lv02d *dev); diff --git a/drivers/hwmon/vt1211.c b/drivers/hwmon/vt1211.c index b0ce37852281..73f77a9b8b18 100644 --- a/drivers/hwmon/vt1211.c +++ b/drivers/hwmon/vt1211.c @@ -1262,7 +1262,7 @@ static int __init vt1211_device_add(unsigned short address) res.name = pdev->name; err = acpi_check_resource_conflict(&res); if (err) - goto EXIT; + goto EXIT_DEV_PUT; err = platform_device_add_resources(pdev, &res, 1); if (err) { diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c index cb808d015361..feae743ba991 100644 --- a/drivers/hwmon/w83627ehf.c +++ b/drivers/hwmon/w83627ehf.c @@ -1548,7 +1548,7 @@ static int __init sensors_w83627ehf_init(void) err = acpi_check_resource_conflict(&res); if (err) - goto exit; + goto exit_device_put; err = platform_device_add_resources(pdev, &res, 1); if (err) { diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c index a34338567a2a..f14813be4eff 100644 --- a/drivers/md/dm-io.c +++ b/drivers/md/dm-io.c @@ -328,7 +328,7 @@ static void dispatch_io(int rw, unsigned int num_regions, struct dpages old_pages = *dp; if (sync) - rw |= (1 << BIO_RW_SYNC); + rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG); /* * For multiple regions we need to be careful to rewind diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c index 3073618269ea..0a225da21272 100644 --- a/drivers/md/dm-kcopyd.c +++ b/drivers/md/dm-kcopyd.c @@ -344,7 +344,7 @@ static int run_io_job(struct kcopyd_job *job) { int r; struct dm_io_request io_req = { - .bi_rw = job->rw | (1 << BIO_RW_SYNC), + .bi_rw = job->rw | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG), .mem.type = DM_IO_PAGE_LIST, .mem.ptr.pl = job->pages, .mem.offset = job->offset, diff --git a/drivers/md/md.c b/drivers/md/md.c index 4495104f6c9f..03b4cd0a6344 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -474,7 +474,7 @@ void md_super_write(mddev_t *mddev, mdk_rdev_t *rdev, * causes ENOTSUPP, we allocate a spare bio... */ struct bio *bio = bio_alloc(GFP_NOIO, 1); - int rw = (1<<BIO_RW) | (1<<BIO_RW_SYNC); + int rw = (1<<BIO_RW) | (1<<BIO_RW_SYNCIO) | (1<<BIO_RW_UNPLUG); bio->bi_bdev = rdev->bdev; bio->bi_sector = sector; @@ -531,7 +531,7 @@ int sync_page_io(struct block_device *bdev, sector_t sector, int size, struct completion event; int ret; - rw |= (1 << BIO_RW_SYNC); + rw |= (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_UNPLUG); bio->bi_bdev = bdev; bio->bi_sector = sector; diff --git a/drivers/media/common/tuners/tuner-simple.c b/drivers/media/common/tuners/tuner-simple.c index de7adaf5fa5b..78412c9c424a 100644 --- a/drivers/media/common/tuners/tuner-simple.c +++ b/drivers/media/common/tuners/tuner-simple.c @@ -318,7 +318,6 @@ static int simple_std_setup(struct dvb_frontend *fe, u8 *config, u8 *cb) { struct tuner_simple_priv *priv = fe->tuner_priv; - u8 tuneraddr; int rc; /* tv norm specific stuff for multi-norm tuners */ @@ -387,6 +386,7 @@ static int simple_std_setup(struct dvb_frontend *fe, case TUNER_PHILIPS_TUV1236D: { + struct tuner_i2c_props i2c = priv->i2c_props; /* 0x40 -> ATSC antenna input 1 */ /* 0x48 -> ATSC antenna input 2 */ /* 0x00 -> NTSC antenna input 1 */ @@ -398,17 +398,15 @@ static int simple_std_setup(struct dvb_frontend *fe, buffer[1] = 0x04; } /* set to the correct mode (analog or digital) */ - tuneraddr = priv->i2c_props.addr; - priv->i2c_props.addr = 0x0a; - rc = tuner_i2c_xfer_send(&priv->i2c_props, &buffer[0], 2); + i2c.addr = 0x0a; + rc = tuner_i2c_xfer_send(&i2c, &buffer[0], 2); if (2 != rc) tuner_warn("i2c i/o error: rc == %d " "(should be 2)\n", rc); - rc = tuner_i2c_xfer_send(&priv->i2c_props, &buffer[2], 2); + rc = tuner_i2c_xfer_send(&i2c, &buffer[2], 2); if (2 != rc) tuner_warn("i2c i/o error: rc == %d " "(should be 2)\n", rc); - priv->i2c_props.addr = tuneraddr; break; } } diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c index 0c733c66a441..069d847ba887 100644 --- a/drivers/media/dvb/dvb-core/dmxdev.c +++ b/drivers/media/dvb/dvb-core/dmxdev.c @@ -364,16 +364,15 @@ static int dvb_dmxdev_section_callback(const u8 *buffer1, size_t buffer1_len, enum dmx_success success) { struct dmxdev_filter *dmxdevfilter = filter->priv; - unsigned long flags; int ret; if (dmxdevfilter->buffer.error) { wake_up(&dmxdevfilter->buffer.queue); return 0; } - spin_lock_irqsave(&dmxdevfilter->dev->lock, flags); + spin_lock(&dmxdevfilter->dev->lock); if (dmxdevfilter->state != DMXDEV_STATE_GO) { - spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags); + spin_unlock(&dmxdevfilter->dev->lock); return 0; } del_timer(&dmxdevfilter->timer); @@ -392,7 +391,7 @@ static int dvb_dmxdev_section_callback(const u8 *buffer1, size_t buffer1_len, } if (dmxdevfilter->params.sec.flags & DMX_ONESHOT) dmxdevfilter->state = DMXDEV_STATE_DONE; - spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags); + spin_unlock(&dmxdevfilter->dev->lock); wake_up(&dmxdevfilter->buffer.queue); return 0; } @@ -404,12 +403,11 @@ static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len, { struct dmxdev_filter *dmxdevfilter = feed->priv; struct dvb_ringbuffer *buffer; - unsigned long flags; int ret; - spin_lock_irqsave(&dmxdevfilter->dev->lock, flags); + spin_lock(&dmxdevfilter->dev->lock); if (dmxdevfilter->params.pes.output == DMX_OUT_DECODER) { - spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags); + spin_unlock(&dmxdevfilter->dev->lock); return 0; } @@ -419,7 +417,7 @@ static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len, else buffer = &dmxdevfilter->dev->dvr_buffer; if (buffer->error) { - spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags); + spin_unlock(&dmxdevfilter->dev->lock); wake_up(&buffer->queue); return 0; } @@ -430,7 +428,7 @@ static int dvb_dmxdev_ts_callback(const u8 *buffer1, size_t buffer1_len, dvb_ringbuffer_flush(buffer); buffer->error = ret; } - spin_unlock_irqrestore(&dmxdevfilter->dev->lock, flags); + spin_unlock(&dmxdevfilter->dev->lock); wake_up(&buffer->queue); return 0; } diff --git a/drivers/media/dvb/dvb-core/dvb_demux.c b/drivers/media/dvb/dvb-core/dvb_demux.c index a2c1fd5d2f67..e2eca0b1fe7c 100644 --- a/drivers/media/dvb/dvb-core/dvb_demux.c +++ b/drivers/media/dvb/dvb-core/dvb_demux.c @@ -399,9 +399,7 @@ static void dvb_dmx_swfilter_packet(struct dvb_demux *demux, const u8 *buf) void dvb_dmx_swfilter_packets(struct dvb_demux *demux, const u8 *buf, size_t count) { - unsigned long flags; - - spin_lock_irqsave(&demux->lock, flags); + spin_lock(&demux->lock); while (count--) { if (buf[0] == 0x47) @@ -409,17 +407,16 @@ void dvb_dmx_swfilter_packets(struct dvb_demux *demux, const u8 *buf, buf += 188; } - spin_unlock_irqrestore(&demux->lock, flags); + spin_unlock(&demux->lock); } EXPORT_SYMBOL(dvb_dmx_swfilter_packets); void dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, size_t count) { - unsigned long flags; int p = 0, i, j; - spin_lock_irqsave(&demux->lock, flags); + spin_lock(&demux->lock); if (demux->tsbufp) { i = demux->tsbufp; @@ -452,18 +449,17 @@ void dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, size_t count) } bailout: - spin_unlock_irqrestore(&demux->lock, flags); + spin_unlock(&demux->lock); } EXPORT_SYMBOL(dvb_dmx_swfilter); void dvb_dmx_swfilter_204(struct dvb_demux *demux, const u8 *buf, size_t count) { - unsigned long flags; int p = 0, i, j; u8 tmppack[188]; - spin_lock_irqsave(&demux->lock, flags); + spin_lock(&demux->lock); if (demux->tsbufp) { i = demux->tsbufp; @@ -504,7 +500,7 @@ void dvb_dmx_swfilter_204(struct dvb_demux *demux, const u8 *buf, size_t count) } bailout: - spin_unlock_irqrestore(&demux->lock, flags); + spin_unlock(&demux->lock); } EXPORT_SYMBOL(dvb_dmx_swfilter_204); diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c index 67cbce82cb91..4dfed6aa2dbc 100644 --- a/drivers/media/radio/radio-si470x.c +++ b/drivers/media/radio/radio-si470x.c @@ -98,11 +98,16 @@ * - blacklisted KWorld radio in hid-core.c and hid-ids.h * 2008-12-03 Mark Lord <mlord@pobox.com> * - add support for DealExtreme USB Radio + * 2009-01-31 Bob Ross <pigiron@gmx.com> + * - correction of stereo detection/setting + * - correction of signal strength indicator scaling + * 2009-01-31 Rick Bronson <rick@efn.org> + * Tobias Lorenz <tobias.lorenz@gmx.net> + * - add LED status output * * ToDo: * - add firmware download/update support * - RDS support: interrupt mode, instead of polling - * - add LED status output (check if that's not already done in firmware) */ @@ -882,6 +887,30 @@ static int si470x_rds_on(struct si470x_device *radio) /************************************************************************** + * General Driver Functions - LED_REPORT + **************************************************************************/ + +/* + * si470x_set_led_state - sets the led state + */ +static int si470x_set_led_state(struct si470x_device *radio, + unsigned char led_state) +{ + unsigned char buf[LED_REPORT_SIZE]; + int retval; + + buf[0] = LED_REPORT; + buf[1] = LED_COMMAND; + buf[2] = led_state; + + retval = si470x_set_report(radio, (void *) &buf, sizeof(buf)); + + return (retval < 0) ? -EINVAL : 0; +} + + + +/************************************************************************** * RDS Driver Functions **************************************************************************/ @@ -1385,20 +1414,22 @@ static int si470x_vidioc_g_tuner(struct file *file, void *priv, }; /* stereo indicator == stereo (instead of mono) */ - if ((radio->registers[STATUSRSSI] & STATUSRSSI_ST) == 1) - tuner->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; - else + if ((radio->registers[STATUSRSSI] & STATUSRSSI_ST) == 0) tuner->rxsubchans = V4L2_TUNER_SUB_MONO; + else + tuner->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; /* mono/stereo selector */ - if ((radio->registers[POWERCFG] & POWERCFG_MONO) == 1) - tuner->audmode = V4L2_TUNER_MODE_MONO; - else + if ((radio->registers[POWERCFG] & POWERCFG_MONO) == 0) tuner->audmode = V4L2_TUNER_MODE_STEREO; + else + tuner->audmode = V4L2_TUNER_MODE_MONO; /* min is worst, max is best; signal:0..0xffff; rssi: 0..0xff */ - tuner->signal = (radio->registers[STATUSRSSI] & STATUSRSSI_RSSI) - * 0x0101; + /* measured in units of dbµV in 1 db increments (max at ~75 dbµV) */ + tuner->signal = (radio->registers[STATUSRSSI] & STATUSRSSI_RSSI); + /* the ideal factor is 0xffff/75 = 873,8 */ + tuner->signal = (tuner->signal * 873) + (8 * tuner->signal / 10); /* automatic frequency control: -1: freq to low, 1 freq to high */ /* AFCRL does only indicate that freq. differs, not if too low/high */ @@ -1632,6 +1663,9 @@ static int si470x_usb_driver_probe(struct usb_interface *intf, /* set initial frequency */ si470x_set_freq(radio, 87.5 * FREQ_MUL); /* available in all regions */ + /* set led to connect state */ + si470x_set_led_state(radio, BLINK_GREEN_LED); + /* rds buffer allocation */ radio->buf_size = rds_buf * 3; radio->buffer = kmalloc(radio->buf_size, GFP_KERNEL); @@ -1715,6 +1749,9 @@ static void si470x_usb_driver_disconnect(struct usb_interface *intf) cancel_delayed_work_sync(&radio->work); usb_set_intfdata(intf, NULL); if (radio->users == 0) { + /* set led to disconnect state */ + si470x_set_led_state(radio, BLINK_ORANGE_LED); + video_unregister_device(radio->videodev); kfree(radio->buffer); kfree(radio); diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index 2ed24527ecd6..65e4901f4db7 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -422,6 +422,7 @@ static void destroy_urbs(struct gspca_dev *gspca_dev) if (urb == NULL) break; + BUG_ON(!gspca_dev->dev); gspca_dev->urb[i] = NULL; if (!gspca_dev->present) usb_kill_urb(urb); @@ -1950,8 +1951,12 @@ void gspca_disconnect(struct usb_interface *intf) { struct gspca_dev *gspca_dev = usb_get_intfdata(intf); + mutex_lock(&gspca_dev->usb_lock); gspca_dev->present = 0; + mutex_unlock(&gspca_dev->usb_lock); + destroy_urbs(gspca_dev); + gspca_dev->dev = NULL; usb_set_intfdata(intf, NULL); /* release the device */ diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index f6b3ef6e691b..c13bd2aa0bea 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -393,7 +393,7 @@ static int ivtv_g_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_fo return 0; } - v4l2_subdev_call(itv->sd_video, video, s_fmt, fmt); + v4l2_subdev_call(itv->sd_video, video, g_fmt, fmt); vbifmt->service_set = ivtv_get_service_set(vbifmt); return 0; } @@ -1748,6 +1748,18 @@ static long ivtv_default(struct file *file, void *fh, int cmd, void *arg) break; } + case IVTV_IOC_DMA_FRAME: + case VIDEO_GET_PTS: + case VIDEO_GET_FRAME_COUNT: + case VIDEO_GET_EVENT: + case VIDEO_PLAY: + case VIDEO_STOP: + case VIDEO_FREEZE: + case VIDEO_CONTINUE: + case VIDEO_COMMAND: + case VIDEO_TRY_COMMAND: + return ivtv_decoder_ioctls(file, cmd, (void *)arg); + default: return -EINVAL; } @@ -1790,18 +1802,6 @@ static long ivtv_serialized_ioctl(struct ivtv *itv, struct file *filp, ivtv_vapi(itv, CX2341X_DEC_SET_AUDIO_MODE, 2, itv->audio_bilingual_mode, itv->audio_stereo_mode); return 0; - case IVTV_IOC_DMA_FRAME: - case VIDEO_GET_PTS: - case VIDEO_GET_FRAME_COUNT: - case VIDEO_GET_EVENT: - case VIDEO_PLAY: - case VIDEO_STOP: - case VIDEO_FREEZE: - case VIDEO_CONTINUE: - case VIDEO_COMMAND: - case VIDEO_TRY_COMMAND: - return ivtv_decoder_ioctls(filp, cmd, (void *)arg); - default: break; } diff --git a/drivers/mfd/htc-egpio.c b/drivers/mfd/htc-egpio.c index 1a4d04664d6d..aa266e1f69b2 100644 --- a/drivers/mfd/htc-egpio.c +++ b/drivers/mfd/htc-egpio.c @@ -286,7 +286,7 @@ static int __init egpio_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) goto fail; - ei->base_addr = ioremap_nocache(res->start, res->end - res->start); + ei->base_addr = ioremap_nocache(res->start, resource_size(res)); if (!ei->base_addr) goto fail; pr_debug("EGPIO phys=%08x virt=%p\n", (u32)res->start, ei->base_addr); @@ -307,7 +307,7 @@ static int __init egpio_probe(struct platform_device *pdev) ei->nchips = pdata->num_chips; ei->chip = kzalloc(sizeof(struct egpio_chip) * ei->nchips, GFP_KERNEL); - if (!ei) { + if (!ei->chip) { ret = -ENOMEM; goto fail; } diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c index ea9488e7ad6d..2e36057659e1 100644 --- a/drivers/mfd/pcf50633-core.c +++ b/drivers/mfd/pcf50633-core.c @@ -678,6 +678,7 @@ static int __devexit pcf50633_remove(struct i2c_client *client) static struct i2c_device_id pcf50633_id_table[] = { {"pcf50633", 0x73}, + {/* end of list */} }; static struct i2c_driver pcf50633_driver = { diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c index 0e5761f12634..4c7b7962f6b8 100644 --- a/drivers/mfd/sm501.c +++ b/drivers/mfd/sm501.c @@ -1050,7 +1050,7 @@ static int __devinit sm501_gpio_register_chip(struct sm501_devdata *sm, return gpiochip_add(gchip); } -static int sm501_register_gpio(struct sm501_devdata *sm) +static int __devinit sm501_register_gpio(struct sm501_devdata *sm) { struct sm501_gpio *gpio = &sm->gpio; resource_size_t iobase = sm->io_res->start + SM501_GPIO; @@ -1321,7 +1321,7 @@ static unsigned int sm501_mem_local[] = { * Common init code for an SM501 */ -static int sm501_init_dev(struct sm501_devdata *sm) +static int __devinit sm501_init_dev(struct sm501_devdata *sm) { struct sm501_initdata *idata; struct sm501_platdata *pdata; @@ -1397,7 +1397,7 @@ static int sm501_init_dev(struct sm501_devdata *sm) return 0; } -static int sm501_plat_probe(struct platform_device *dev) +static int __devinit sm501_plat_probe(struct platform_device *dev) { struct sm501_devdata *sm; int ret; @@ -1586,8 +1586,8 @@ static struct sm501_platdata sm501_pci_platdata = { .gpio_base = -1, }; -static int sm501_pci_probe(struct pci_dev *dev, - const struct pci_device_id *id) +static int __devinit sm501_pci_probe(struct pci_dev *dev, + const struct pci_device_id *id) { struct sm501_devdata *sm; int err; @@ -1693,7 +1693,7 @@ static void sm501_dev_remove(struct sm501_devdata *sm) sm501_gpio_remove(sm); } -static void sm501_pci_remove(struct pci_dev *dev) +static void __devexit sm501_pci_remove(struct pci_dev *dev) { struct sm501_devdata *sm = pci_get_drvdata(dev); @@ -1727,16 +1727,16 @@ static struct pci_device_id sm501_pci_tbl[] = { MODULE_DEVICE_TABLE(pci, sm501_pci_tbl); -static struct pci_driver sm501_pci_drv = { +static struct pci_driver sm501_pci_driver = { .name = "sm501", .id_table = sm501_pci_tbl, .probe = sm501_pci_probe, - .remove = sm501_pci_remove, + .remove = __devexit_p(sm501_pci_remove), }; MODULE_ALIAS("platform:sm501"); -static struct platform_driver sm501_plat_drv = { +static struct platform_driver sm501_plat_driver = { .driver = { .name = "sm501", .owner = THIS_MODULE, @@ -1749,14 +1749,14 @@ static struct platform_driver sm501_plat_drv = { static int __init sm501_base_init(void) { - platform_driver_register(&sm501_plat_drv); - return pci_register_driver(&sm501_pci_drv); + platform_driver_register(&sm501_plat_driver); + return pci_register_driver(&sm501_pci_driver); } static void __exit sm501_base_exit(void) { - platform_driver_unregister(&sm501_plat_drv); - pci_unregister_driver(&sm501_pci_drv); + platform_driver_unregister(&sm501_plat_driver); + pci_unregister_driver(&sm501_pci_driver); } module_init(sm501_base_init); diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c index e7ab0035d305..68826f1e36bc 100644 --- a/drivers/mfd/twl4030-core.c +++ b/drivers/mfd/twl4030-core.c @@ -38,7 +38,7 @@ #include <linux/i2c.h> #include <linux/i2c/twl4030.h> -#ifdef CONFIG_ARM +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) #include <mach/cpu.h> #endif diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index f92595c8f165..84d5ea1ec171 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -1111,7 +1111,7 @@ int wm8350_read_auxadc(struct wm8350 *wm8350, int channel, int scale, int vref) do { schedule_timeout_interruptible(1); reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1); - } while (tries-- && (reg & WM8350_AUXADC_POLL)); + } while (--tries && (reg & WM8350_AUXADC_POLL)); if (!tries) dev_err(wm8350->dev, "adc chn %d read timeout\n", channel); @@ -1297,14 +1297,29 @@ static void wm8350_client_dev_register(struct wm8350 *wm8350, int wm8350_device_init(struct wm8350 *wm8350, int irq, struct wm8350_platform_data *pdata) { - int ret = -EINVAL; + int ret; u16 id1, id2, mask_rev; u16 cust_id, mode, chip_rev; /* get WM8350 revision and config mode */ - wm8350->read_dev(wm8350, WM8350_RESET_ID, sizeof(id1), &id1); - wm8350->read_dev(wm8350, WM8350_ID, sizeof(id2), &id2); - wm8350->read_dev(wm8350, WM8350_REVISION, sizeof(mask_rev), &mask_rev); + ret = wm8350->read_dev(wm8350, WM8350_RESET_ID, sizeof(id1), &id1); + if (ret != 0) { + dev_err(wm8350->dev, "Failed to read ID: %d\n", ret); + goto err; + } + + ret = wm8350->read_dev(wm8350, WM8350_ID, sizeof(id2), &id2); + if (ret != 0) { + dev_err(wm8350->dev, "Failed to read ID: %d\n", ret); + goto err; + } + + ret = wm8350->read_dev(wm8350, WM8350_REVISION, sizeof(mask_rev), + &mask_rev); + if (ret != 0) { + dev_err(wm8350->dev, "Failed to read revision: %d\n", ret); + goto err; + } id1 = be16_to_cpu(id1); id2 = be16_to_cpu(id2); @@ -1404,14 +1419,12 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, return ret; } - if (pdata && pdata->init) { - ret = pdata->init(wm8350); - if (ret != 0) { - dev_err(wm8350->dev, "Platform init() failed: %d\n", - ret); - goto err; - } - } + wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0xFFFF); + wm8350_reg_write(wm8350, WM8350_INT_STATUS_1_MASK, 0xFFFF); + wm8350_reg_write(wm8350, WM8350_INT_STATUS_2_MASK, 0xFFFF); + wm8350_reg_write(wm8350, WM8350_UNDER_VOLTAGE_INT_STATUS_MASK, 0xFFFF); + wm8350_reg_write(wm8350, WM8350_GPIO_INT_STATUS_MASK, 0xFFFF); + wm8350_reg_write(wm8350, WM8350_COMPARATOR_INT_STATUS_MASK, 0xFFFF); mutex_init(&wm8350->auxadc_mutex); mutex_init(&wm8350->irq_mutex); @@ -1430,6 +1443,15 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, } wm8350->chip_irq = irq; + if (pdata && pdata->init) { + ret = pdata->init(wm8350); + if (ret != 0) { + dev_err(wm8350->dev, "Platform init() failed: %d\n", + ret); + goto err; + } + } + wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0x0); wm8350_client_dev_register(wm8350, "wm8350-codec", diff --git a/drivers/mfd/wm8350-regmap.c b/drivers/mfd/wm8350-regmap.c index 68887b817d17..9a4cc954cb7c 100644 --- a/drivers/mfd/wm8350-regmap.c +++ b/drivers/mfd/wm8350-regmap.c @@ -3188,7 +3188,7 @@ const struct wm8350_reg_access wm8350_reg_io_map[] = { { 0x7CFF, 0x0C00, 0x7FFF }, /* R1 - ID */ { 0x0000, 0x0000, 0x0000 }, /* R2 */ { 0xBE3B, 0xBE3B, 0x8000 }, /* R3 - System Control 1 */ - { 0xFCF7, 0xFCF7, 0xF800 }, /* R4 - System Control 2 */ + { 0xFEF7, 0xFEF7, 0xF800 }, /* R4 - System Control 2 */ { 0x80FF, 0x80FF, 0x8000 }, /* R5 - System Hibernate */ { 0xFB0E, 0xFB0E, 0x0000 }, /* R6 - Interface Control */ { 0x0000, 0x0000, 0x0000 }, /* R7 */ diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 45b1f430685f..513eb09a638f 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -584,7 +584,7 @@ static int mmc_blk_probe(struct mmc_card *card) if (err) goto out; - string_get_size(get_capacity(md->disk) << 9, STRING_UNITS_2, + string_get_size((u64)get_capacity(md->disk) << 9, STRING_UNITS_2, cap_str, sizeof(cap_str)); printk(KERN_INFO "%s: %s %s %s %s\n", md->disk->disk_name, mmc_card_id(card), mmc_card_name(card), diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c index b92b172074ee..b9f1e84897cc 100644 --- a/drivers/mmc/card/mmc_test.c +++ b/drivers/mmc/card/mmc_test.c @@ -494,7 +494,7 @@ static int mmc_test_basic_read(struct mmc_test_card *test) sg_init_one(&sg, test->buffer, 512); - ret = mmc_test_simple_transfer(test, &sg, 1, 0, 1, 512, 1); + ret = mmc_test_simple_transfer(test, &sg, 1, 0, 1, 512, 0); if (ret) return ret; diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 76bfe16c09b1..2b1196e6142c 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -1548,9 +1548,10 @@ static bool filter(struct dma_chan *chan, void *slave) { struct dw_dma_slave *dws = slave; - if (dws->dma_dev == chan->device->dev) + if (dws->dma_dev == chan->device->dev) { + chan->private = dws; return true; - else + } else return false; } #endif diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index db37490f67ec..a631c81dce12 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -55,6 +55,7 @@ #define VS30 (1 << 25) #define SDVS18 (0x5 << 9) #define SDVS30 (0x6 << 9) +#define SDVS33 (0x7 << 9) #define SDVSCLR 0xFFFFF1FF #define SDVSDET 0x00000400 #define AUTOIDLE 0x1 @@ -375,6 +376,32 @@ static void mmc_omap_report_irq(struct mmc_omap_host *host, u32 status) } #endif /* CONFIG_MMC_DEBUG */ +/* + * MMC controller internal state machines reset + * + * Used to reset command or data internal state machines, using respectively + * SRC or SRD bit of SYSCTL register + * Can be called from interrupt context + */ +static inline void mmc_omap_reset_controller_fsm(struct mmc_omap_host *host, + unsigned long bit) +{ + unsigned long i = 0; + unsigned long limit = (loops_per_jiffy * + msecs_to_jiffies(MMC_TIMEOUT_MS)); + + OMAP_HSMMC_WRITE(host->base, SYSCTL, + OMAP_HSMMC_READ(host->base, SYSCTL) | bit); + + while ((OMAP_HSMMC_READ(host->base, SYSCTL) & bit) && + (i++ < limit)) + cpu_relax(); + + if (OMAP_HSMMC_READ(host->base, SYSCTL) & bit) + dev_err(mmc_dev(host->mmc), + "Timeout waiting on controller reset in %s\n", + __func__); +} /* * MMC controller IRQ handler @@ -403,21 +430,17 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id) (status & CMD_CRC)) { if (host->cmd) { if (status & CMD_TIMEOUT) { - OMAP_HSMMC_WRITE(host->base, SYSCTL, - OMAP_HSMMC_READ(host->base, - SYSCTL) | SRC); - while (OMAP_HSMMC_READ(host->base, - SYSCTL) & SRC) - ; - + mmc_omap_reset_controller_fsm(host, SRC); host->cmd->error = -ETIMEDOUT; } else { host->cmd->error = -EILSEQ; } end_cmd = 1; } - if (host->data) + if (host->data) { mmc_dma_cleanup(host); + mmc_omap_reset_controller_fsm(host, SRD); + } } if ((status & DATA_TIMEOUT) || (status & DATA_CRC)) { @@ -426,12 +449,7 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id) mmc_dma_cleanup(host); else host->data->error = -EILSEQ; - OMAP_HSMMC_WRITE(host->base, SYSCTL, - OMAP_HSMMC_READ(host->base, - SYSCTL) | SRD); - while (OMAP_HSMMC_READ(host->base, - SYSCTL) & SRD) - ; + mmc_omap_reset_controller_fsm(host, SRD); end_trans = 1; } } @@ -456,13 +474,20 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id) } /* - * Switch MMC operating voltage + * Switch MMC interface voltage ... only relevant for MMC1. + * + * MMC2 and MMC3 use fixed 1.8V levels, and maybe a transceiver. + * The MMC2 transceiver controls are used instead of DAT4..DAT7. + * Some chips, like eMMC ones, use internal transceivers. */ static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd) { u32 reg_val = 0; int ret; + if (host->id != OMAP_MMC1_DEVID) + return 0; + /* Disable the clocks */ clk_disable(host->fclk); clk_disable(host->iclk); @@ -485,19 +510,26 @@ static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd) OMAP_HSMMC_WRITE(host->base, HCTL, OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR); reg_val = OMAP_HSMMC_READ(host->base, HCTL); + /* * If a MMC dual voltage card is detected, the set_ios fn calls * this fn with VDD bit set for 1.8V. Upon card removal from the * slot, omap_mmc_set_ios sets the VDD back to 3V on MMC_POWER_OFF. * - * Only MMC1 supports 3.0V. MMC2 will not function if SDVS30 is - * set in HCTL. + * Cope with a bit of slop in the range ... per data sheets: + * - "1.8V" for vdds_mmc1/vdds_mmc1a can be up to 2.45V max, + * but recommended values are 1.71V to 1.89V + * - "3.0V" for vdds_mmc1/vdds_mmc1a can be up to 3.5V max, + * but recommended values are 2.7V to 3.3V + * + * Board setup code shouldn't permit anything very out-of-range. + * TWL4030-family VMMC1 and VSIM regulators are fine (avoiding the + * middle range) but VSIM can't power DAT4..DAT7 at more than 3V. */ - if (host->id == OMAP_MMC1_DEVID && (((1 << vdd) == MMC_VDD_32_33) || - ((1 << vdd) == MMC_VDD_33_34))) - reg_val |= SDVS30; - if ((1 << vdd) == MMC_VDD_165_195) + if ((1 << vdd) <= MMC_VDD_23_24) reg_val |= SDVS18; + else + reg_val |= SDVS30; OMAP_HSMMC_WRITE(host->base, HCTL, reg_val); @@ -517,16 +549,15 @@ static void mmc_omap_detect(struct work_struct *work) { struct mmc_omap_host *host = container_of(work, struct mmc_omap_host, mmc_carddetect_work); + struct omap_mmc_slot_data *slot = &mmc_slot(host); + + host->carddetect = slot->card_detect(slot->card_detect_irq); sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch"); if (host->carddetect) { mmc_detect_change(host->mmc, (HZ * 200) / 1000); } else { - OMAP_HSMMC_WRITE(host->base, SYSCTL, - OMAP_HSMMC_READ(host->base, SYSCTL) | SRD); - while (OMAP_HSMMC_READ(host->base, SYSCTL) & SRD) - ; - + mmc_omap_reset_controller_fsm(host, SRD); mmc_detect_change(host->mmc, (HZ * 50) / 1000); } } @@ -538,7 +569,6 @@ static irqreturn_t omap_mmc_cd_handler(int irq, void *dev_id) { struct mmc_omap_host *host = (struct mmc_omap_host *)dev_id; - host->carddetect = mmc_slot(host).card_detect(irq); schedule_work(&host->mmc_carddetect_work); return IRQ_HANDLED; @@ -757,10 +787,14 @@ static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) case MMC_POWER_OFF: mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0); /* - * Reset bus voltage to 3V if it got set to 1.8V earlier. + * Reset interface voltage to 3V if it's 1.8V now; + * only relevant on MMC-1, the others always use 1.8V. + * * REVISIT: If we are able to detect cards after unplugging * a 1.8V card, this code should not be needed. */ + if (host->id != OMAP_MMC1_DEVID) + break; if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) { int vdd = fls(host->mmc->ocr_avail) - 1; if (omap_mmc_switch_opcond(host, vdd) != 0) @@ -784,7 +818,9 @@ static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) } if (host->id == OMAP_MMC1_DEVID) { - /* Only MMC1 can operate at 3V/1.8V */ + /* Only MMC1 can interface at 3V without some flavor + * of external transceiver; but they all handle 1.8V. + */ if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) && (ios->vdd == DUAL_VOLT_OCR_BIT)) { /* @@ -1137,7 +1173,9 @@ static int omap_mmc_suspend(struct platform_device *pdev, pm_message_t state) " level suspend\n"); } - if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) { + if (host->id == OMAP_MMC1_DEVID + && !(OMAP_HSMMC_READ(host->base, HCTL) + & SDVSDET)) { OMAP_HSMMC_WRITE(host->base, HCTL, OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR); diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 35a98eec7414..f4a67c65d301 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -329,7 +329,7 @@ static void do_pio_write(struct s3cmci_host *host) to_ptr = host->base + host->sdidata; - while ((fifo = fifo_free(host))) { + while ((fifo = fifo_free(host)) > 3) { if (!host->pio_bytes) { res = get_data_buffer(host, &host->pio_bytes, &host->pio_ptr); diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index f07255cb17ee..8cff5f5e7f86 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -144,8 +144,7 @@ static int jmicron_probe(struct sdhci_pci_chip *chip) SDHCI_QUIRK_32BIT_DMA_SIZE | SDHCI_QUIRK_32BIT_ADMA_SIZE | SDHCI_QUIRK_RESET_AFTER_REQUEST | - SDHCI_QUIRK_BROKEN_SMALL_PIO | - SDHCI_QUIRK_FORCE_HIGHSPEED; + SDHCI_QUIRK_BROKEN_SMALL_PIO; } /* diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 6b2d1f99af67..f52f3053ed92 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1636,8 +1636,7 @@ int sdhci_add_host(struct sdhci_host *host) mmc->f_max = host->max_clk; mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ; - if ((caps & SDHCI_CAN_DO_HISPD) || - (host->quirks & SDHCI_QUIRK_FORCE_HIGHSPEED)) + if (caps & SDHCI_CAN_DO_HISPD) mmc->caps |= MMC_CAP_SD_HIGHSPEED; mmc->ocr_avail = 0; @@ -1723,7 +1722,9 @@ int sdhci_add_host(struct sdhci_host *host) #endif #ifdef SDHCI_USE_LEDS_CLASS - host->led.name = mmc_hostname(mmc); + snprintf(host->led_name, sizeof(host->led_name), + "%s::", mmc_hostname(mmc)); + host->led.name = host->led_name; host->led.brightness = LED_OFF; host->led.default_trigger = mmc_hostname(mmc); host->led.brightness_set = sdhci_led_control; diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 3efba2363941..ebb83657e27a 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -208,8 +208,6 @@ struct sdhci_host { #define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12) /* Controller has an issue with buffer bits for small transfers */ #define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13) -/* Controller supports high speed but doesn't have the caps bit set */ -#define SDHCI_QUIRK_FORCE_HIGHSPEED (1<<14) int irq; /* Device IRQ */ void __iomem * ioaddr; /* Mapped address */ @@ -222,6 +220,7 @@ struct sdhci_host { #if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) struct led_classdev led; /* LED control */ + char led_name[32]; #endif spinlock_t lock; /* Mutex */ diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index c98c1570a40b..47a33cec3793 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -139,7 +139,8 @@ static int atmel_nand_device_ready(struct mtd_info *mtd) struct nand_chip *nand_chip = mtd->priv; struct atmel_nand_host *host = nand_chip->priv; - return gpio_get_value(host->board->rdy_pin); + return gpio_get_value(host->board->rdy_pin) ^ + !!host->board->rdy_pin_active_low; } /* diff --git a/drivers/parport/parport_atari.c b/drivers/parport/parport_atari.c index ad4cdd256137..0b28fccec03f 100644 --- a/drivers/parport/parport_atari.c +++ b/drivers/parport/parport_atari.c @@ -84,7 +84,7 @@ parport_atari_frob_control(struct parport *p, unsigned char mask, static unsigned char parport_atari_read_status(struct parport *p) { - return ((mfp.par_dt_reg & 1 ? 0 : PARPORT_STATUS_BUSY) | + return ((st_mfp.par_dt_reg & 1 ? 0 : PARPORT_STATUS_BUSY) | PARPORT_STATUS_SELECT | PARPORT_STATUS_ERROR); } @@ -193,9 +193,9 @@ static int __init parport_atari_init(void) sound_ym.wd_data = sound_ym.rd_data_reg_sel | (1 << 5); local_irq_restore(flags); /* MFP port I0 as input. */ - mfp.data_dir &= ~1; + st_mfp.data_dir &= ~1; /* MFP port I0 interrupt on high->low edge. */ - mfp.active_edge &= ~1; + st_mfp.active_edge &= ~1; p = parport_register_port((unsigned long)&sound_ym.wd_data, IRQ_MFP_BUSY, PARPORT_DMA_NONE, &parport_atari_ops); diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index f4b7c79023ff..f3f686581a90 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -61,6 +61,8 @@ /* global iommu list, set NULL for ignored DMAR units */ static struct intel_iommu **g_iommus; +static int rwbf_quirk; + /* * 0: Present * 1-11: Reserved @@ -785,7 +787,7 @@ static void iommu_flush_write_buffer(struct intel_iommu *iommu) u32 val; unsigned long flag; - if (!cap_rwbf(iommu->cap)) + if (!rwbf_quirk && !cap_rwbf(iommu->cap)) return; val = iommu->gcmd | DMA_GCMD_WBF; @@ -3137,3 +3139,15 @@ static struct iommu_ops intel_iommu_ops = { .unmap = intel_iommu_unmap_range, .iova_to_phys = intel_iommu_iova_to_phys, }; + +static void __devinit quirk_iommu_rwbf(struct pci_dev *dev) +{ + /* + * Mobile 4 Series Chipset neglects to set RWBF capability, + * but needs it: + */ + printk(KERN_INFO "DMAR: Forcing write-buffer flush capability\n"); + rwbf_quirk = 1; +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_rwbf); diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index 44f15ff70c1d..baba2eb5367d 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -103,14 +103,12 @@ static void msix_set_enable(struct pci_dev *dev, int enable) } } -/* - * Essentially, this is ((1 << (1 << x)) - 1), but without the - * undefinedness of a << 32. - */ static inline __attribute_const__ u32 msi_mask(unsigned x) { - static const u32 mask[] = { 1, 2, 4, 0xf, 0xff, 0xffff, 0xffffffff }; - return mask[x]; + /* Don't shift by >= width of type */ + if (x >= 5) + return 0xffffffff; + return (1 << (1 << x)) - 1; } static void msix_flush_writes(struct irq_desc *desc) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index e3efe6b19ee7..6d6120007af4 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1540,16 +1540,21 @@ void pci_release_region(struct pci_dev *pdev, int bar) } /** - * pci_request_region - Reserved PCI I/O and memory resource + * __pci_request_region - Reserved PCI I/O and memory resource * @pdev: PCI device whose resources are to be reserved * @bar: BAR to be reserved * @res_name: Name to be associated with resource. + * @exclusive: whether the region access is exclusive or not * * Mark the PCI region associated with PCI device @pdev BR @bar as * being reserved by owner @res_name. Do not access any * address inside the PCI regions unless this call returns * successfully. * + * If @exclusive is set, then the region is marked so that userspace + * is explicitly not allowed to map the resource via /dev/mem or + * sysfs MMIO access. + * * Returns 0 on success, or %EBUSY on error. A warning * message is also printed on failure. */ @@ -1588,12 +1593,12 @@ err_out: } /** - * pci_request_region - Reserved PCI I/O and memory resource + * pci_request_region - Reserve PCI I/O and memory resource * @pdev: PCI device whose resources are to be reserved * @bar: BAR to be reserved - * @res_name: Name to be associated with resource. + * @res_name: Name to be associated with resource * - * Mark the PCI region associated with PCI device @pdev BR @bar as + * Mark the PCI region associated with PCI device @pdev BAR @bar as * being reserved by owner @res_name. Do not access any * address inside the PCI regions unless this call returns * successfully. diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 26ddf78ac300..07c0aa5275e6 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -16,21 +16,21 @@ extern int pci_mmap_fits(struct pci_dev *pdev, int resno, #endif /** - * Firmware PM callbacks + * struct pci_platform_pm_ops - Firmware PM callbacks * - * @is_manageable - returns 'true' if given device is power manageable by the - * platform firmware + * @is_manageable: returns 'true' if given device is power manageable by the + * platform firmware * - * @set_state - invokes the platform firmware to set the device's power state + * @set_state: invokes the platform firmware to set the device's power state * - * @choose_state - returns PCI power state of given device preferred by the - * platform; to be used during system-wide transitions from a - * sleeping state to the working state and vice versa + * @choose_state: returns PCI power state of given device preferred by the + * platform; to be used during system-wide transitions from a + * sleeping state to the working state and vice versa * - * @can_wakeup - returns 'true' if given device is capable of waking up the - * system from a sleeping state + * @can_wakeup: returns 'true' if given device is capable of waking up the + * system from a sleeping state * - * @sleep_wake - enables/disables the system wake up capability of given device + * @sleep_wake: enables/disables the system wake up capability of given device * * If given platform is generally capable of power managing PCI devices, all of * these callbacks are mandatory. diff --git a/drivers/pci/rom.c b/drivers/pci/rom.c index 29cbe47f219f..36864a935d68 100644 --- a/drivers/pci/rom.c +++ b/drivers/pci/rom.c @@ -55,6 +55,7 @@ void pci_disable_rom(struct pci_dev *pdev) /** * pci_get_rom_size - obtain the actual size of the ROM image + * @pdev: target PCI device * @rom: kernel virtual pointer to image of ROM * @size: size of PCI window * return: size of actual ROM image diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 94363115a42a..b3866ad50227 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -62,6 +62,7 @@ config DELL_LAPTOP depends on EXPERIMENTAL depends on BACKLIGHT_CLASS_DEVICE depends on RFKILL + depends on POWER_SUPPLY default n ---help--- This driver adds support for rfkill and backlight control to Dell @@ -301,6 +302,7 @@ config INTEL_MENLOW config EEEPC_LAPTOP tristate "Eee PC Hotkey Driver (EXPERIMENTAL)" depends on ACPI + depends on INPUT depends on EXPERIMENTAL select BACKLIGHT_CLASS_DEVICE select HWMON diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c index 65dc41540c62..45940f31fe9e 100644 --- a/drivers/platform/x86/fujitsu-laptop.c +++ b/drivers/platform/x86/fujitsu-laptop.c @@ -166,6 +166,7 @@ struct fujitsu_hotkey_t { struct platform_device *pf_device; struct kfifo *fifo; spinlock_t fifo_lock; + int rfkill_supported; int rfkill_state; int logolamp_registered; int kblamps_registered; @@ -526,7 +527,7 @@ static ssize_t show_lid_state(struct device *dev, struct device_attribute *attr, char *buf) { - if (fujitsu_hotkey->rfkill_state == UNSUPPORTED_CMD) + if (!(fujitsu_hotkey->rfkill_supported & 0x100)) return sprintf(buf, "unknown\n"); if (fujitsu_hotkey->rfkill_state & 0x100) return sprintf(buf, "open\n"); @@ -538,7 +539,7 @@ static ssize_t show_dock_state(struct device *dev, struct device_attribute *attr, char *buf) { - if (fujitsu_hotkey->rfkill_state == UNSUPPORTED_CMD) + if (!(fujitsu_hotkey->rfkill_supported & 0x200)) return sprintf(buf, "unknown\n"); if (fujitsu_hotkey->rfkill_state & 0x200) return sprintf(buf, "docked\n"); @@ -550,7 +551,7 @@ static ssize_t show_radios_state(struct device *dev, struct device_attribute *attr, char *buf) { - if (fujitsu_hotkey->rfkill_state == UNSUPPORTED_CMD) + if (!(fujitsu_hotkey->rfkill_supported & 0x20)) return sprintf(buf, "unknown\n"); if (fujitsu_hotkey->rfkill_state & 0x20) return sprintf(buf, "on\n"); @@ -928,8 +929,17 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device) ; /* No action, result is discarded */ vdbg_printk(FUJLAPTOP_DBG_INFO, "Discarded %i ringbuffer entries\n", i); - fujitsu_hotkey->rfkill_state = - call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0); + fujitsu_hotkey->rfkill_supported = + call_fext_func(FUNC_RFKILL, 0x0, 0x0, 0x0); + + /* Make sure our bitmask of supported functions is cleared if the + RFKILL function block is not implemented, like on the S7020. */ + if (fujitsu_hotkey->rfkill_supported == UNSUPPORTED_CMD) + fujitsu_hotkey->rfkill_supported = 0; + + if (fujitsu_hotkey->rfkill_supported) + fujitsu_hotkey->rfkill_state = + call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0); /* Suspect this is a keymap of the application panel, print it */ printk(KERN_INFO "fujitsu-laptop: BTNI: [0x%x]\n", @@ -1005,8 +1015,9 @@ static void acpi_fujitsu_hotkey_notify(acpi_handle handle, u32 event, input = fujitsu_hotkey->input; - fujitsu_hotkey->rfkill_state = - call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0); + if (fujitsu_hotkey->rfkill_supported) + fujitsu_hotkey->rfkill_state = + call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0); switch (event) { case ACPI_FUJITSU_NOTIFY_CODE1: diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c index 1fd8f2193ed8..4377e93a43d7 100644 --- a/drivers/s390/char/sclp.c +++ b/drivers/s390/char/sclp.c @@ -280,8 +280,11 @@ sclp_dispatch_evbufs(struct sccb_header *sccb) rc = 0; for (offset = sizeof(struct sccb_header); offset < sccb->length; offset += evbuf->length) { - /* Search for event handler */ evbuf = (struct evbuf_header *) ((addr_t) sccb + offset); + /* Check for malformed hardware response */ + if (evbuf->length == 0) + break; + /* Search for event handler */ reg = NULL; list_for_each(l, &sclp_reg_list) { reg = list_entry(l, struct sclp_register, list); diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c index 506390496416..77ab6e34a100 100644 --- a/drivers/s390/char/sclp_cmd.c +++ b/drivers/s390/char/sclp_cmd.c @@ -19,6 +19,7 @@ #include <linux/memory.h> #include <asm/chpid.h> #include <asm/sclp.h> +#include <asm/setup.h> #include "sclp.h" @@ -474,6 +475,10 @@ static void __init add_memory_merged(u16 rn) goto skip_add; if (start + size > VMEM_MAX_PHYS) size = VMEM_MAX_PHYS - start; + if (memory_end_set && (start >= memory_end)) + goto skip_add; + if (memory_end_set && (start + size > memory_end)) + size = memory_end - start; add_memory(0, start, size); skip_add: first_rn = rn; diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c index a1a511bdec8c..ed1e728763a2 100644 --- a/drivers/scsi/ibmvscsi/ibmvfc.c +++ b/drivers/scsi/ibmvscsi/ibmvfc.c @@ -1573,9 +1573,6 @@ static int ibmvfc_queuecommand(struct scsi_cmnd *cmnd, vfc_cmd->resp_len = sizeof(vfc_cmd->rsp); vfc_cmd->cancel_key = (unsigned long)cmnd->device->hostdata; vfc_cmd->tgt_scsi_id = rport->port_id; - if ((rport->supported_classes & FC_COS_CLASS3) && - (fc_host_supported_classes(vhost->host) & FC_COS_CLASS3)) - vfc_cmd->flags = IBMVFC_CLASS_3_ERR; vfc_cmd->iu.xfer_len = scsi_bufflen(cmnd); int_to_scsilun(cmnd->device->lun, &vfc_cmd->iu.lun); memcpy(vfc_cmd->iu.cdb, cmnd->cmnd, cmnd->cmd_len); @@ -3266,6 +3263,7 @@ static int ibmvfc_alloc_target(struct ibmvfc_host *vhost, u64 scsi_id) return -ENOMEM; } + memset(tgt, 0, sizeof(*tgt)); tgt->scsi_id = scsi_id; tgt->new_scsi_id = scsi_id; tgt->vhost = vhost; @@ -3576,9 +3574,18 @@ static void ibmvfc_log_ae(struct ibmvfc_host *vhost, int events) static void ibmvfc_tgt_add_rport(struct ibmvfc_target *tgt) { struct ibmvfc_host *vhost = tgt->vhost; - struct fc_rport *rport; + struct fc_rport *rport = tgt->rport; unsigned long flags; + if (rport) { + tgt_dbg(tgt, "Setting rport roles\n"); + fc_remote_port_rolechg(rport, tgt->ids.roles); + spin_lock_irqsave(vhost->host->host_lock, flags); + ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE); + spin_unlock_irqrestore(vhost->host->host_lock, flags); + return; + } + tgt_dbg(tgt, "Adding rport\n"); rport = fc_remote_port_add(vhost->host, 0, &tgt->ids); spin_lock_irqsave(vhost->host->host_lock, flags); diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h index 87dafd0f8d44..b21e071b9862 100644 --- a/drivers/scsi/ibmvscsi/ibmvfc.h +++ b/drivers/scsi/ibmvscsi/ibmvfc.h @@ -32,7 +32,7 @@ #define IBMVFC_DRIVER_VERSION "1.0.4" #define IBMVFC_DRIVER_DATE "(November 14, 2008)" -#define IBMVFC_DEFAULT_TIMEOUT 15 +#define IBMVFC_DEFAULT_TIMEOUT 60 #define IBMVFC_INIT_TIMEOUT 120 #define IBMVFC_MAX_REQUESTS_DEFAULT 100 diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c index 74d07d137dae..c9aa7611e408 100644 --- a/drivers/scsi/ibmvscsi/ibmvscsi.c +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c @@ -432,6 +432,7 @@ static int map_sg_data(struct scsi_cmnd *cmd, sdev_printk(KERN_ERR, cmd->device, "Can't allocate memory " "for indirect table\n"); + scsi_dma_unmap(cmd); return 0; } } diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 257c24115de9..809d32d95c76 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1998,6 +1998,8 @@ int iscsi_host_add(struct Scsi_Host *shost, struct device *pdev) if (!shost->can_queue) shost->can_queue = ISCSI_DEF_XMIT_CMDS_MAX; + if (!shost->transportt->eh_timed_out) + shost->transportt->eh_timed_out = iscsi_eh_cmd_timed_out; return scsi_add_host(shost, pdev); } EXPORT_SYMBOL_GPL(iscsi_host_add); @@ -2020,7 +2022,6 @@ struct Scsi_Host *iscsi_host_alloc(struct scsi_host_template *sht, shost = scsi_host_alloc(sht, sizeof(struct iscsi_host) + dd_data_size); if (!shost) return NULL; - shost->transportt->eh_timed_out = iscsi_eh_cmd_timed_out; if (qdepth > ISCSI_MAX_CMD_PER_LUN || qdepth < 1) { if (qdepth != 0) diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index a8f30bdaff69..a7302480bc4a 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -5258,6 +5258,7 @@ lpfc_send_els_event(struct lpfc_vport *vport, sizeof(struct lpfc_name)); break; default: + kfree(els_data); return; } memcpy(els_data->wwpn, &ndlp->nlp_portname, sizeof(struct lpfc_name)); diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 33a3c13fd893..f4c57227ec18 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -1265,13 +1265,6 @@ qla24xx_vport_delete(struct fc_vport *fc_vport) test_bit(FCPORT_UPDATE_NEEDED, &vha->dpc_flags)) msleep(1000); - if (ha->mqenable) { - if (qla25xx_delete_queues(vha, 0) != QLA_SUCCESS) - qla_printk(KERN_WARNING, ha, - "Queue delete failed.\n"); - vha->req_ques[0] = ha->req_q_map[0]->id; - } - qla24xx_disable_vp(vha); fc_remove_host(vha->host); @@ -1293,6 +1286,12 @@ qla24xx_vport_delete(struct fc_vport *fc_vport) vha->host_no, vha->vp_idx, vha)); } + if (ha->mqenable) { + if (qla25xx_delete_queues(vha, 0) != QLA_SUCCESS) + qla_printk(KERN_WARNING, ha, + "Queue delete failed.\n"); + } + scsi_host_put(vha->host); qla_printk(KERN_INFO, ha, "vport %d deleted\n", id); return 0; diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 023ee77fb027..e0c5bb54b258 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2135,6 +2135,7 @@ struct qla_msix_entry { /* Work events. */ enum qla_work_type { QLA_EVT_AEN, + QLA_EVT_IDC_ACK, }; @@ -2149,6 +2150,10 @@ struct qla_work_evt { enum fc_host_event_code code; u32 data; } aen; + struct { +#define QLA_IDC_ACK_REGS 7 + uint16_t mb[QLA_IDC_ACK_REGS]; + } idc_ack; } u; }; diff --git a/drivers/scsi/qla2xxx/qla_devtbl.h b/drivers/scsi/qla2xxx/qla_devtbl.h index d78d35e681ab..d6ea69df7c5c 100644 --- a/drivers/scsi/qla2xxx/qla_devtbl.h +++ b/drivers/scsi/qla2xxx/qla_devtbl.h @@ -72,7 +72,7 @@ static char *qla2x00_model_name[QLA_MODEL_NAMES*2] = { "QLA2462", "Sun PCI-X 2.0 to 4Gb FC, Dual Channel", /* 0x141 */ "QLE2460", "Sun PCI-Express to 2Gb FC, Single Channel", /* 0x142 */ "QLE2462", "Sun PCI-Express to 4Gb FC, Single Channel", /* 0x143 */ - "QEM2462" "Server I/O Module 4Gb FC, Dual Channel", /* 0x144 */ + "QEM2462", "Server I/O Module 4Gb FC, Dual Channel", /* 0x144 */ "QLE2440", "PCI-Express to 4Gb FC, Single Channel", /* 0x145 */ "QLE2464", "PCI-Express to 4Gb FC, Quad Channel", /* 0x146 */ "QLA2440", "PCI-X 2.0 to 4Gb FC, Single Channel", /* 0x147 */ diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h index 7abb045a0410..ffff42554087 100644 --- a/drivers/scsi/qla2xxx/qla_fw.h +++ b/drivers/scsi/qla2xxx/qla_fw.h @@ -1402,6 +1402,8 @@ struct access_chip_rsp_84xx { #define MBA_IDC_NOTIFY 0x8101 #define MBA_IDC_TIME_EXT 0x8102 +#define MBC_IDC_ACK 0x101 + struct nvram_81xx { /* NVRAM header. */ uint8_t id[4]; diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index a336b4bc81a7..6de283f8f111 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -72,6 +72,7 @@ extern int qla2x00_loop_reset(scsi_qla_host_t *); extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int); extern int qla2x00_post_aen_work(struct scsi_qla_host *, enum fc_host_event_code, u32); +extern int qla2x00_post_idc_ack_work(struct scsi_qla_host *, uint16_t *); extern void qla2x00_abort_fcport_cmds(fc_port_t *); extern struct scsi_qla_host *qla2x00_create_host(struct scsi_host_template *, @@ -266,6 +267,8 @@ qla2x00_set_idma_speed(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t *); extern int qla84xx_verify_chip(struct scsi_qla_host *, uint16_t *); +extern int qla81xx_idc_ack(scsi_qla_host_t *, uint16_t *); + /* * Global Function Prototypes in qla_isr.c source file. */ @@ -376,10 +379,8 @@ extern int qla2x00_dfs_remove(scsi_qla_host_t *); /* Globa function prototypes for multi-q */ extern int qla25xx_request_irq(struct rsp_que *); -extern int qla25xx_init_req_que(struct scsi_qla_host *, struct req_que *, - uint8_t); -extern int qla25xx_init_rsp_que(struct scsi_qla_host *, struct rsp_que *, - uint8_t); +extern int qla25xx_init_req_que(struct scsi_qla_host *, struct req_que *); +extern int qla25xx_init_rsp_que(struct scsi_qla_host *, struct rsp_que *); extern int qla25xx_create_req_que(struct qla_hw_data *, uint16_t, uint8_t, uint16_t, uint8_t, uint8_t); extern int qla25xx_create_rsp_que(struct qla_hw_data *, uint16_t, uint8_t, diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index f6368a1d3021..986501759ad4 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -1226,9 +1226,8 @@ qla24xx_config_rings(struct scsi_qla_host *vha) icb->firmware_options_2 |= __constant_cpu_to_le32(BIT_18); - icb->firmware_options_2 |= __constant_cpu_to_le32(BIT_22); + icb->firmware_options_2 &= __constant_cpu_to_le32(~BIT_22); icb->firmware_options_2 |= __constant_cpu_to_le32(BIT_23); - ha->rsp_q_map[0]->options = icb->firmware_options_2; WRT_REG_DWORD(®->isp25mq.req_q_in, 0); WRT_REG_DWORD(®->isp25mq.req_q_out, 0); @@ -3493,7 +3492,7 @@ qla25xx_init_queues(struct qla_hw_data *ha) rsp = ha->rsp_q_map[i]; if (rsp) { rsp->options &= ~BIT_0; - ret = qla25xx_init_rsp_que(base_vha, rsp, rsp->options); + ret = qla25xx_init_rsp_que(base_vha, rsp); if (ret != QLA_SUCCESS) DEBUG2_17(printk(KERN_WARNING "%s Rsp que:%d init failed\n", __func__, @@ -3507,7 +3506,7 @@ qla25xx_init_queues(struct qla_hw_data *ha) if (req) { /* Clear outstanding commands array. */ req->options &= ~BIT_0; - ret = qla25xx_init_req_que(base_vha, req, req->options); + ret = qla25xx_init_req_que(base_vha, req); if (ret != QLA_SUCCESS) DEBUG2_17(printk(KERN_WARNING "%s Req que:%d init failed\n", __func__, diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index e28ad81baf1e..f250e5b7897c 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -266,6 +266,40 @@ qla2x00_mbx_completion(scsi_qla_host_t *vha, uint16_t mb0) } } +static void +qla81xx_idc_event(scsi_qla_host_t *vha, uint16_t aen, uint16_t descr) +{ + static char *event[] = + { "Complete", "Request Notification", "Time Extension" }; + int rval; + struct device_reg_24xx __iomem *reg24 = &vha->hw->iobase->isp24; + uint16_t __iomem *wptr; + uint16_t cnt, timeout, mb[QLA_IDC_ACK_REGS]; + + /* Seed data -- mailbox1 -> mailbox7. */ + wptr = (uint16_t __iomem *)®24->mailbox1; + for (cnt = 0; cnt < QLA_IDC_ACK_REGS; cnt++, wptr++) + mb[cnt] = RD_REG_WORD(wptr); + + DEBUG2(printk("scsi(%ld): Inter-Driver Commucation %s -- " + "%04x %04x %04x %04x %04x %04x %04x.\n", vha->host_no, + event[aen & 0xff], + mb[0], mb[1], mb[2], mb[3], mb[4], mb[5], mb[6])); + + /* Acknowledgement needed? [Notify && non-zero timeout]. */ + timeout = (descr >> 8) & 0xf; + if (aen != MBA_IDC_NOTIFY || !timeout) + return; + + DEBUG2(printk("scsi(%ld): Inter-Driver Commucation %s -- " + "ACK timeout=%d.\n", vha->host_no, event[aen & 0xff], timeout)); + + rval = qla2x00_post_idc_ack_work(vha, mb); + if (rval != QLA_SUCCESS) + qla_printk(KERN_WARNING, vha->hw, + "IDC failed to post ACK.\n"); +} + /** * qla2x00_async_event() - Process aynchronous events. * @ha: SCSI driver HA context @@ -714,21 +748,9 @@ skip_rio: "%04x %04x %04x\n", vha->host_no, mb[1], mb[2], mb[3])); break; case MBA_IDC_COMPLETE: - DEBUG2(printk("scsi(%ld): Inter-Driver Commucation " - "Complete -- %04x %04x %04x\n", vha->host_no, mb[1], mb[2], - mb[3])); - break; case MBA_IDC_NOTIFY: - DEBUG2(printk("scsi(%ld): Inter-Driver Commucation " - "Request Notification -- %04x %04x %04x\n", vha->host_no, - mb[1], mb[2], mb[3])); - /**** Mailbox registers 4 - 7 valid!!! */ - break; case MBA_IDC_TIME_EXT: - DEBUG2(printk("scsi(%ld): Inter-Driver Commucation " - "Time Extension -- %04x %04x %04x\n", vha->host_no, mb[1], - mb[2], mb[3])); - /**** Mailbox registers 4 - 7 valid!!! */ + qla81xx_idc_event(vha, mb[0], mb[1]); break; } @@ -1707,7 +1729,6 @@ qla25xx_msix_rsp_q(int irq, void *dev_id) struct qla_hw_data *ha; struct rsp_que *rsp; struct device_reg_24xx __iomem *reg; - uint16_t msix_disabled_hccr = 0; rsp = (struct rsp_que *) dev_id; if (!rsp) { @@ -1720,17 +1741,8 @@ qla25xx_msix_rsp_q(int irq, void *dev_id) spin_lock_irq(&ha->hardware_lock); - msix_disabled_hccr = rsp->options; - if (!rsp->id) - msix_disabled_hccr &= __constant_cpu_to_le32(BIT_22); - else - msix_disabled_hccr &= __constant_cpu_to_le32(BIT_6); - qla24xx_process_response_queue(rsp); - if (!msix_disabled_hccr) - WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT); - spin_unlock_irq(&ha->hardware_lock); return IRQ_HANDLED; diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index f94ffbb98e95..4c7504cb3990 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -3090,8 +3090,7 @@ verify_done: } int -qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req, - uint8_t options) +qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req) { int rval; unsigned long flags; @@ -3101,7 +3100,7 @@ qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req, struct qla_hw_data *ha = vha->hw; mcp->mb[0] = MBC_INITIALIZE_MULTIQ; - mcp->mb[1] = options; + mcp->mb[1] = req->options; mcp->mb[2] = MSW(LSD(req->dma)); mcp->mb[3] = LSW(LSD(req->dma)); mcp->mb[6] = MSW(MSD(req->dma)); @@ -3128,7 +3127,7 @@ qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req, mcp->tov = 60; spin_lock_irqsave(&ha->hardware_lock, flags); - if (!(options & BIT_0)) { + if (!(req->options & BIT_0)) { WRT_REG_DWORD(®->req_q_in, 0); WRT_REG_DWORD(®->req_q_out, 0); } @@ -3142,8 +3141,7 @@ qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req, } int -qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp, - uint8_t options) +qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp) { int rval; unsigned long flags; @@ -3153,7 +3151,7 @@ qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp, struct qla_hw_data *ha = vha->hw; mcp->mb[0] = MBC_INITIALIZE_MULTIQ; - mcp->mb[1] = options; + mcp->mb[1] = rsp->options; mcp->mb[2] = MSW(LSD(rsp->dma)); mcp->mb[3] = LSW(LSD(rsp->dma)); mcp->mb[6] = MSW(MSD(rsp->dma)); @@ -3178,7 +3176,7 @@ qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp, mcp->tov = 60; spin_lock_irqsave(&ha->hardware_lock, flags); - if (!(options & BIT_0)) { + if (!(rsp->options & BIT_0)) { WRT_REG_DWORD(®->rsp_q_out, 0); WRT_REG_DWORD(®->rsp_q_in, 0); } @@ -3193,3 +3191,29 @@ qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp, return rval; } +int +qla81xx_idc_ack(scsi_qla_host_t *vha, uint16_t *mb) +{ + int rval; + mbx_cmd_t mc; + mbx_cmd_t *mcp = &mc; + + DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no)); + + mcp->mb[0] = MBC_IDC_ACK; + memcpy(&mcp->mb[1], mb, QLA_IDC_ACK_REGS * sizeof(uint16_t)); + mcp->out_mb = MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0; + mcp->in_mb = MBX_0; + mcp->tov = MBX_TOV_SECONDS; + mcp->flags = 0; + rval = qla2x00_mailbox_command(vha, mcp); + + if (rval != QLA_SUCCESS) { + DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__, + vha->host_no, rval, mcp->mb[0])); + } else { + DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no)); + } + + return rval; +} diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index f53179c46423..3f23932210c4 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -396,7 +396,7 @@ qla24xx_create_vhost(struct fc_vport *fc_vport) qla2x00_start_timer(vha, qla2x00_timer, WATCH_INTERVAL); - memset(vha->req_ques, 0, sizeof(vha->req_ques) * QLA_MAX_HOST_QUES); + memset(vha->req_ques, 0, sizeof(vha->req_ques)); vha->req_ques[0] = ha->req_q_map[0]->id; host->can_queue = ha->req_q_map[0]->length + 128; host->this_id = 255; @@ -471,7 +471,7 @@ qla25xx_delete_req_que(struct scsi_qla_host *vha, struct req_que *req) if (req) { req->options |= BIT_0; - ret = qla25xx_init_req_que(vha, req, req->options); + ret = qla25xx_init_req_que(vha, req); } if (ret == QLA_SUCCESS) qla25xx_free_req_que(vha, req); @@ -486,7 +486,7 @@ qla25xx_delete_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp) if (rsp) { rsp->options |= BIT_0; - ret = qla25xx_init_rsp_que(vha, rsp, rsp->options); + ret = qla25xx_init_rsp_que(vha, rsp); } if (ret == QLA_SUCCESS) qla25xx_free_rsp_que(vha, rsp); @@ -502,7 +502,7 @@ int qla25xx_update_req_que(struct scsi_qla_host *vha, uint8_t que, uint8_t qos) req->options |= BIT_3; req->qos = qos; - ret = qla25xx_init_req_que(vha, req, req->options); + ret = qla25xx_init_req_que(vha, req); if (ret != QLA_SUCCESS) DEBUG2_17(printk(KERN_WARNING "%s failed\n", __func__)); /* restore options bit */ @@ -632,7 +632,7 @@ qla25xx_create_req_que(struct qla_hw_data *ha, uint16_t options, req->max_q_depth = ha->req_q_map[0]->max_q_depth; mutex_unlock(&ha->vport_lock); - ret = qla25xx_init_req_que(base_vha, req, options); + ret = qla25xx_init_req_que(base_vha, req); if (ret != QLA_SUCCESS) { qla_printk(KERN_WARNING, ha, "%s failed\n", __func__); mutex_lock(&ha->vport_lock); @@ -710,7 +710,7 @@ qla25xx_create_rsp_que(struct qla_hw_data *ha, uint16_t options, if (ret) goto que_failed; - ret = qla25xx_init_rsp_que(base_vha, rsp, options); + ret = qla25xx_init_rsp_que(base_vha, rsp); if (ret != QLA_SUCCESS) { qla_printk(KERN_WARNING, ha, "%s failed\n", __func__); mutex_lock(&ha->vport_lock); diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index c11f872d3e10..2f5f72531e23 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -2522,6 +2522,19 @@ qla2x00_post_aen_work(struct scsi_qla_host *vha, enum fc_host_event_code code, return qla2x00_post_work(vha, e, 1); } +int +qla2x00_post_idc_ack_work(struct scsi_qla_host *vha, uint16_t *mb) +{ + struct qla_work_evt *e; + + e = qla2x00_alloc_work(vha, QLA_EVT_IDC_ACK, 1); + if (!e) + return QLA_FUNCTION_FAILED; + + memcpy(e->u.idc_ack.mb, mb, QLA_IDC_ACK_REGS * sizeof(uint16_t)); + return qla2x00_post_work(vha, e, 1); +} + static void qla2x00_do_work(struct scsi_qla_host *vha) { @@ -2539,6 +2552,9 @@ qla2x00_do_work(struct scsi_qla_host *vha) fc_host_post_event(vha->host, fc_get_event_number(), e->u.aen.code, e->u.aen.data); break; + case QLA_EVT_IDC_ACK: + qla81xx_idc_ack(vha, e->u.idc_ack.mb); + break; } if (e->flags & QLA_EVT_FLAG_FREE) kfree(e); diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index 9c3b694c049d..284827926eff 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -684,7 +684,7 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr) "end=0x%x size=0x%x.\n", le32_to_cpu(region->code), start, le32_to_cpu(region->end) >> 2, le32_to_cpu(region->size))); - switch (le32_to_cpu(region->code)) { + switch (le32_to_cpu(region->code) & 0xff) { case FLT_REG_FW: ha->flt_region_fw = start; break; diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index cfa4c11a4797..79f7053da99b 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.03.00-k2" +#define QLA2XXX_VERSION "8.03.00-k3" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 3 diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 66505bb79410..8f4de20c9deb 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -317,6 +317,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget, return sdev; out_device_destroy: + scsi_device_set_state(sdev, SDEV_DEL); transport_destroy_device(&sdev->sdev_gendev); put_device(&sdev->sdev_gendev); out: diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 8f0bd3f7a59f..516925d8b570 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -1078,7 +1078,7 @@ sg_ioctl(struct inode *inode, struct file *filp, case BLKTRACESETUP: return blk_trace_setup(sdp->device->request_queue, sdp->disk->disk_name, - sdp->device->sdev_gendev.devt, + MKDEV(SCSI_GENERIC_MAJOR, sdp->index), (char *)arg); case BLKTRACESTART: return blk_trace_startstop(sdp->device->request_queue, 1); diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 0d934bfbdd9b..b4b39811b445 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -2083,6 +2083,20 @@ static int serial8250_startup(struct uart_port *port) serial8250_set_mctrl(&up->port, up->port.mctrl); + /* Serial over Lan (SoL) hack: + Intel 8257x Gigabit ethernet chips have a + 16550 emulation, to be used for Serial Over Lan. + Those chips take a longer time than a normal + serial device to signalize that a transmission + data was queued. Due to that, the above test generally + fails. One solution would be to delay the reading of + iir. However, this is not reliable, since the timeout + is variable. So, let's just don't test if we receive + TX irq. This way, we'll never enable UART_BUG_TXEN. + */ + if (up->port.flags & UPF_NO_TXEN_TEST) + goto dont_test_tx_en; + /* * Do a quick test to see if we receive an * interrupt when we enable the TX irq. @@ -2102,6 +2116,7 @@ static int serial8250_startup(struct uart_port *port) up->bugs &= ~UART_BUG_TXEN; } +dont_test_tx_en: spin_unlock_irqrestore(&up->port.lock, flags); /* diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 536d8e510f66..533f82025adf 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -798,6 +798,21 @@ pci_default_setup(struct serial_private *priv, return setup_port(priv, port, bar, offset, board->reg_shift); } +static int skip_tx_en_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + port->flags |= UPF_NO_TXEN_TEST; + printk(KERN_DEBUG "serial8250: skipping TxEn test for device " + "[%04x:%04x] subsystem [%04x:%04x]\n", + priv->dev->vendor, + priv->dev->device, + priv->dev->subsystem_vendor, + priv->dev->subsystem_device); + + return pci_default_setup(priv, board, port, idx); +} + /* This should be in linux/pci_ids.h */ #define PCI_VENDOR_ID_SBSMODULARIO 0x124B #define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B @@ -864,6 +879,27 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .init = pci_inteli960ni_init, .setup = pci_default_setup, }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_8257X_SOL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = skip_tx_en_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82573L_SOL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = skip_tx_en_setup, + }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_82573E_SOL, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = skip_tx_en_setup, + }, /* * ITE */ diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 89362d733d62..8f58f7ff0dd7 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -877,6 +877,10 @@ static int atmel_startup(struct uart_port *port) } } + /* Save current CSR for comparison in atmel_tasklet_func() */ + atmel_port->irq_status_prev = UART_GET_CSR(port); + atmel_port->irq_status = atmel_port->irq_status_prev; + /* * Finally, enable the serial port */ diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c index 92187e28608a..ac79cbe4c2cf 100644 --- a/drivers/serial/jsm/jsm_driver.c +++ b/drivers/serial/jsm/jsm_driver.c @@ -84,6 +84,8 @@ static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent) brd->pci_dev = pdev; if (pdev->device == PCIE_DEVICE_ID_NEO_4_IBM) brd->maxports = 4; + else if (pdev->device == PCI_DEVICE_ID_DIGI_NEO_8) + brd->maxports = 8; else brd->maxports = 2; @@ -212,6 +214,7 @@ static struct pci_device_id jsm_pci_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45), 0, 0, 2 }, { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45PRI), 0, 0, 3 }, { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_4_IBM), 0, 0, 4 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_DIGI_NEO_8), 0, 0, 5 }, { 0, } }; MODULE_DEVICE_TABLE(pci, jsm_pci_tbl); diff --git a/drivers/spi/spi_gpio.c b/drivers/spi/spi_gpio.c index 49698cabc30d..f5ed9721aabb 100644 --- a/drivers/spi/spi_gpio.c +++ b/drivers/spi/spi_gpio.c @@ -114,7 +114,7 @@ static inline void setmosi(const struct spi_device *spi, int is_on) static inline int getmiso(const struct spi_device *spi) { - return gpio_get_value(SPI_MISO_GPIO); + return !!gpio_get_value(SPI_MISO_GPIO); } #undef pdata diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index c54fc40458b1..a4301dc02d27 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -298,19 +298,6 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message) EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend); /** - * usb_hcd_pci_resume_early - resume a PCI-based HCD before IRQs are enabled - * @dev: USB Host Controller being resumed - * - * Store this function in the HCD's struct pci_driver as .resume_early. - */ -int usb_hcd_pci_resume_early(struct pci_dev *dev) -{ - pci_restore_state(dev); - return 0; -} -EXPORT_SYMBOL_GPL(usb_hcd_pci_resume_early); - -/** * usb_hcd_pci_resume - power management resume of a PCI-based HCD * @dev: USB Host Controller being resumed * @@ -333,6 +320,8 @@ int usb_hcd_pci_resume(struct pci_dev *dev) } #endif + pci_restore_state(dev); + hcd = pci_get_drvdata(dev); if (hcd->state != HC_STATE_SUSPENDED) { dev_dbg(hcd->self.controller, diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index 5b94a56bec23..f750eb1ab595 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -257,7 +257,6 @@ extern void usb_hcd_pci_remove(struct pci_dev *dev); #ifdef CONFIG_PM extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t msg); -extern int usb_hcd_pci_resume_early(struct pci_dev *dev); extern int usb_hcd_pci_resume(struct pci_dev *dev); #endif /* CONFIG_PM */ diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index 9b36205c5759..0ce4e2819847 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -904,8 +904,8 @@ static void pxa25x_ep_fifo_flush(struct usb_ep *_ep) /* most IN status is the same, but ISO can't stall */ *ep->reg_udccs = UDCCS_BI_TPC|UDCCS_BI_FTF|UDCCS_BI_TUR - | (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) - ? 0 : UDCCS_BI_SST; + | (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC + ? 0 : UDCCS_BI_SST); } diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index bb21fb0a4969..abb9a7706ec7 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -432,7 +432,6 @@ static struct pci_driver ehci_pci_driver = { #ifdef CONFIG_PM .suspend = usb_hcd_pci_suspend, - .resume_early = usb_hcd_pci_resume_early, .resume = usb_hcd_pci_resume, #endif .shutdown = usb_hcd_pci_shutdown, diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 5d625c3fd423..f9961b4c0da3 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -487,7 +487,6 @@ static struct pci_driver ohci_pci_driver = { #ifdef CONFIG_PM .suspend = usb_hcd_pci_suspend, - .resume_early = usb_hcd_pci_resume_early, .resume = usb_hcd_pci_resume, #endif diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 944f7e0ca4df..cf5e4cf7ea42 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -942,7 +942,6 @@ static struct pci_driver uhci_pci_driver = { #ifdef CONFIG_PM .suspend = usb_hcd_pci_suspend, - .resume_early = usb_hcd_pci_resume_early, .resume = usb_hcd_pci_resume, #endif /* PM */ }; diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c index 2291c5f5af51..958751ccea43 100644 --- a/drivers/usb/host/whci/asl.c +++ b/drivers/usb/host/whci/asl.c @@ -227,13 +227,13 @@ void scan_async_work(struct work_struct *work) * Now that the ASL is updated, complete the removal of any * removed qsets. */ - spin_lock(&whc->lock); + spin_lock_irq(&whc->lock); list_for_each_entry_safe(qset, t, &whc->async_removed_list, list_node) { qset_remove_complete(whc, qset); } - spin_unlock(&whc->lock); + spin_unlock_irq(&whc->lock); } /** diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c index 7dc85a0bee7c..df8b85f07092 100644 --- a/drivers/usb/host/whci/pzl.c +++ b/drivers/usb/host/whci/pzl.c @@ -255,13 +255,13 @@ void scan_periodic_work(struct work_struct *work) * Now that the PZL is updated, complete the removal of any * removed qsets. */ - spin_lock(&whc->lock); + spin_lock_irq(&whc->lock); list_for_each_entry_safe(qset, t, &whc->periodic_removed_list, list_node) { qset_remove_complete(whc, qset); } - spin_unlock(&whc->lock); + spin_unlock_irq(&whc->lock); } /** diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index bf0af660df8a..fb19803060cf 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -1054,10 +1054,7 @@ config FB_RIVA_BACKLIGHT config FB_I810 tristate "Intel 810/815 support (EXPERIMENTAL)" - depends on EXPERIMENTAL && PCI && X86_32 - select AGP - select AGP_INTEL - select FB + depends on EXPERIMENTAL && FB && PCI && X86_32 && AGP_INTEL select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA @@ -1120,10 +1117,7 @@ config FB_CARILLO_RANCH config FB_INTEL tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)" - depends on EXPERIMENTAL && PCI && X86 - select FB - select AGP - select AGP_INTEL + depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c index 8058572a7428..018850c116c6 100644 --- a/drivers/video/atafb.c +++ b/drivers/video/atafb.c @@ -841,7 +841,7 @@ static int tt_detect(void) tt_dmasnd.ctrl = DMASND_CTRL_OFF; udelay(20); /* wait a while for things to settle down */ } - mono_moni = (mfp.par_dt_reg & 0x80) == 0; + mono_moni = (st_mfp.par_dt_reg & 0x80) == 0; tt_get_par(&par); tt_encode_var(&atafb_predefined[0], &par); @@ -2035,7 +2035,7 @@ static int stste_detect(void) tt_dmasnd.ctrl = DMASND_CTRL_OFF; udelay(20); /* wait a while for things to settle down */ } - mono_moni = (mfp.par_dt_reg & 0x80) == 0; + mono_moni = (st_mfp.par_dt_reg & 0x80) == 0; stste_get_par(&par); stste_encode_var(&atafb_predefined[0], &par); @@ -2086,20 +2086,20 @@ static void st_ovsc_switch(void) return; local_irq_save(flags); - mfp.tim_ct_b = 0x10; - mfp.active_edge |= 8; - mfp.tim_ct_b = 0; - mfp.tim_dt_b = 0xf0; - mfp.tim_ct_b = 8; - while (mfp.tim_dt_b > 1) /* TOS does it this way, don't ask why */ + st_mfp.tim_ct_b = 0x10; + st_mfp.active_edge |= 8; + st_mfp.tim_ct_b = 0; + st_mfp.tim_dt_b = 0xf0; + st_mfp.tim_ct_b = 8; + while (st_mfp.tim_dt_b > 1) /* TOS does it this way, don't ask why */ ; - new = mfp.tim_dt_b; + new = st_mfp.tim_dt_b; do { udelay(LINE_DELAY); old = new; - new = mfp.tim_dt_b; + new = st_mfp.tim_dt_b; } while (old != new); - mfp.tim_ct_b = 0x10; + st_mfp.tim_ct_b = 0x10; udelay(SYNC_DELAY); if (atari_switches & ATARI_SWITCH_OVSC_IKBD) diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c index e6e299feb51b..2181ce4d7ebd 100644 --- a/drivers/video/aty/aty128fb.c +++ b/drivers/video/aty/aty128fb.c @@ -2365,7 +2365,6 @@ static void fbcon_aty128_bmove(struct display *p, int sy, int sx, int dy, int dx static void aty128_set_suspend(struct aty128fb_par *par, int suspend) { u32 pmgt; - u16 pwr_command; struct pci_dev *pdev = par->pdev; if (!par->pm_reg) diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 09a3d5522b43..325c10ff6a2c 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -406,7 +406,7 @@ config ITCO_WDT ---help--- Hardware driver for the intel TCO timer based watchdog devices. These drivers are included in the Intel 82801 I/O Controller - Hub family (from ICH0 up to ICH8) and in the Intel 6300ESB + Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB controller hub. The TCO (Total Cost of Ownership) timer is a watchdog timer diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c index 5531691f46ea..e35d54589232 100644 --- a/drivers/watchdog/at91rm9200_wdt.c +++ b/drivers/watchdog/at91rm9200_wdt.c @@ -107,10 +107,10 @@ static int at91_wdt_close(struct inode *inode, struct file *file) static int at91_wdt_settimeout(int new_time) { /* - * All counting occurs at SLOW_CLOCK / 128 = 0.256 Hz + * All counting occurs at SLOW_CLOCK / 128 = 256 Hz * * Since WDV is a 16-bit counter, the maximum period is - * 65536 / 0.256 = 256 seconds. + * 65536 / 256 = 256 seconds. */ if ((new_time <= 0) || (new_time > WDT_MAX_TIME)) return -EINVAL; diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c index b1da287f90ec..a56ac84381b1 100644 --- a/drivers/watchdog/at91sam9_wdt.c +++ b/drivers/watchdog/at91sam9_wdt.c @@ -18,6 +18,7 @@ #include <linux/errno.h> #include <linux/fs.h> #include <linux/init.h> +#include <linux/io.h> #include <linux/kernel.h> #include <linux/miscdevice.h> #include <linux/module.h> diff --git a/drivers/watchdog/iTCO_vendor_support.c b/drivers/watchdog/iTCO_vendor_support.c index 2474ebca88f6..d8264ad0be41 100644 --- a/drivers/watchdog/iTCO_vendor_support.c +++ b/drivers/watchdog/iTCO_vendor_support.c @@ -1,7 +1,7 @@ /* * intel TCO vendor specific watchdog driver support * - * (c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>. + * (c) Copyright 2006-2009 Wim Van Sebroeck <wim@iguana.be>. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -19,7 +19,7 @@ /* Module and version information */ #define DRV_NAME "iTCO_vendor_support" -#define DRV_VERSION "1.02" +#define DRV_VERSION "1.03" #define PFX DRV_NAME ": " /* Includes */ @@ -77,6 +77,26 @@ MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default=0 (n * 20.6 seconds. */ +static void supermicro_old_pre_start(unsigned long acpibase) +{ + unsigned long val32; + + /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */ + val32 = inl(SMI_EN); + val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ + outl(val32, SMI_EN); /* Needed to activate watchdog */ +} + +static void supermicro_old_pre_stop(unsigned long acpibase) +{ + unsigned long val32; + + /* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */ + val32 = inl(SMI_EN); + val32 |= 0x00002000; /* Turn on SMI clearing watchdog */ + outl(val32, SMI_EN); /* Needed to deactivate watchdog */ +} + static void supermicro_old_pre_keepalive(unsigned long acpibase) { /* Reload TCO Timer (done in iTCO_wdt_keepalive) + */ @@ -228,14 +248,18 @@ static void supermicro_new_pre_set_heartbeat(unsigned int heartbeat) void iTCO_vendor_pre_start(unsigned long acpibase, unsigned int heartbeat) { - if (vendorsupport == SUPERMICRO_NEW_BOARD) + if (vendorsupport == SUPERMICRO_OLD_BOARD) + supermicro_old_pre_start(acpibase); + else if (vendorsupport == SUPERMICRO_NEW_BOARD) supermicro_new_pre_start(heartbeat); } EXPORT_SYMBOL(iTCO_vendor_pre_start); void iTCO_vendor_pre_stop(unsigned long acpibase) { - if (vendorsupport == SUPERMICRO_NEW_BOARD) + if (vendorsupport == SUPERMICRO_OLD_BOARD) + supermicro_old_pre_stop(acpibase); + else if (vendorsupport == SUPERMICRO_NEW_BOARD) supermicro_new_pre_stop(); } EXPORT_SYMBOL(iTCO_vendor_pre_stop); diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index 5b395a4ddfdf..352334947ea3 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -1,7 +1,7 @@ /* - * intel TCO Watchdog Driver (Used in i82801 and i6300ESB chipsets) + * intel TCO Watchdog Driver (Used in i82801 and i63xxESB chipsets) * - * (c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>. + * (c) Copyright 2006-2009 Wim Van Sebroeck <wim@iguana.be>. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -63,7 +63,7 @@ /* Module and version information */ #define DRV_NAME "iTCO_wdt" -#define DRV_VERSION "1.04" +#define DRV_VERSION "1.05" #define PFX DRV_NAME ": " /* Includes */ @@ -236,16 +236,16 @@ MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl); /* Address definitions for the TCO */ /* TCO base address */ -#define TCOBASE iTCO_wdt_private.ACPIBASE + 0x60 +#define TCOBASE iTCO_wdt_private.ACPIBASE + 0x60 /* SMI Control and Enable Register */ -#define SMI_EN iTCO_wdt_private.ACPIBASE + 0x30 +#define SMI_EN iTCO_wdt_private.ACPIBASE + 0x30 #define TCO_RLD TCOBASE + 0x00 /* TCO Timer Reload and Curr. Value */ #define TCOv1_TMR TCOBASE + 0x01 /* TCOv1 Timer Initial Value */ -#define TCO_DAT_IN TCOBASE + 0x02 /* TCO Data In Register */ -#define TCO_DAT_OUT TCOBASE + 0x03 /* TCO Data Out Register */ -#define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */ -#define TCO2_STS TCOBASE + 0x06 /* TCO2 Status Register */ +#define TCO_DAT_IN TCOBASE + 0x02 /* TCO Data In Register */ +#define TCO_DAT_OUT TCOBASE + 0x03 /* TCO Data Out Register */ +#define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */ +#define TCO2_STS TCOBASE + 0x06 /* TCO2 Status Register */ #define TCO1_CNT TCOBASE + 0x08 /* TCO1 Control Register */ #define TCO2_CNT TCOBASE + 0x0a /* TCO2 Control Register */ #define TCOv2_TMR TCOBASE + 0x12 /* TCOv2 Timer Initial Value */ @@ -338,7 +338,6 @@ static int iTCO_wdt_unset_NO_REBOOT_bit(void) static int iTCO_wdt_start(void) { unsigned int val; - unsigned long val32; spin_lock(&iTCO_wdt_private.io_lock); @@ -351,11 +350,6 @@ static int iTCO_wdt_start(void) return -EIO; } - /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */ - val32 = inl(SMI_EN); - val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ - outl(val32, SMI_EN); - /* Force the timer to its reload value by writing to the TCO_RLD register */ if (iTCO_wdt_private.iTCO_version == 2) @@ -378,7 +372,6 @@ static int iTCO_wdt_start(void) static int iTCO_wdt_stop(void) { unsigned int val; - unsigned long val32; spin_lock(&iTCO_wdt_private.io_lock); @@ -390,11 +383,6 @@ static int iTCO_wdt_stop(void) outw(val, TCO1_CNT); val = inw(TCO1_CNT); - /* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */ - val32 = inl(SMI_EN); - val32 |= 0x00002000; - outl(val32, SMI_EN); - /* Set the NO_REBOOT bit to prevent later reboots, just for sure */ iTCO_wdt_set_NO_REBOOT_bit(); @@ -649,6 +637,7 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, int ret; u32 base_address; unsigned long RCBA; + unsigned long val32; /* * Find the ACPI/PM base I/O address which is the base @@ -695,6 +684,10 @@ static int __devinit iTCO_wdt_init(struct pci_dev *pdev, ret = -EIO; goto out; } + /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */ + val32 = inl(SMI_EN); + val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ + outl(val32, SMI_EN); /* The TCO I/O registers reside in a 32-byte range pointed to by the TCOBASE value */ diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c index e7e83b65c18f..3ccd348d112d 100644 --- a/drivers/xen/manage.c +++ b/drivers/xen/manage.c @@ -45,6 +45,13 @@ static int xen_suspend(void *data) err); return err; } + err = sysdev_suspend(PMSG_SUSPEND); + if (err) { + printk(KERN_ERR "xen_suspend: sysdev_suspend failed: %d\n", + err); + device_power_up(PMSG_RESUME); + return err; + } xen_mm_pin_all(); gnttab_suspend(); @@ -61,6 +68,7 @@ static int xen_suspend(void *data) gnttab_resume(); xen_mm_unpin_all(); + sysdev_resume(); device_power_up(PMSG_RESUME); if (!*cancelled) { |