diff options
Diffstat (limited to 'drivers/spi')
| -rw-r--r-- | drivers/spi/spi-axi-spi-engine.c | 26 | ||||
| -rw-r--r-- | drivers/spi/spi-davinci.c | 6 | ||||
| -rw-r--r-- | drivers/spi/spi-imx.c | 2 | ||||
| -rw-r--r-- | drivers/spi/spi-mux.c | 2 | ||||
| -rw-r--r-- | drivers/spi/spi-omap2-mcspi.c | 15 | ||||
| -rw-r--r-- | drivers/spi/spi.c | 20 |
6 files changed, 45 insertions, 26 deletions
diff --git a/drivers/spi/spi-axi-spi-engine.c b/drivers/spi/spi-axi-spi-engine.c index e358ac5b4509..96a524772549 100644 --- a/drivers/spi/spi-axi-spi-engine.c +++ b/drivers/spi/spi-axi-spi-engine.c @@ -164,16 +164,20 @@ static void spi_engine_gen_xfer(struct spi_engine_program *p, bool dry, } static void spi_engine_gen_sleep(struct spi_engine_program *p, bool dry, - int delay_ns, u32 sclk_hz) + int delay_ns, int inst_ns, u32 sclk_hz) { unsigned int t; - /* negative delay indicates error, e.g. from spi_delay_to_ns() */ - if (delay_ns <= 0) + /* + * Negative delay indicates error, e.g. from spi_delay_to_ns(). And if + * delay is less that the instruction execution time, there is no need + * for an extra sleep instruction since the instruction execution time + * will already cover the required delay. + */ + if (delay_ns < 0 || delay_ns <= inst_ns) return; - /* rounding down since executing the instruction adds a couple of ticks delay */ - t = DIV_ROUND_DOWN_ULL((u64)delay_ns * sclk_hz, NSEC_PER_SEC); + t = DIV_ROUND_UP_ULL((u64)(delay_ns - inst_ns) * sclk_hz, NSEC_PER_SEC); while (t) { unsigned int n = min(t, 256U); @@ -220,10 +224,16 @@ static void spi_engine_compile_message(struct spi_message *msg, bool dry, struct spi_device *spi = msg->spi; struct spi_controller *host = spi->controller; struct spi_transfer *xfer; - int clk_div, new_clk_div; + int clk_div, new_clk_div, inst_ns; bool keep_cs = false; u8 bits_per_word = 0; + /* + * Take into account instruction execution time for more accurate sleep + * times, especially when the delay is small. + */ + inst_ns = DIV_ROUND_UP(NSEC_PER_SEC, host->max_speed_hz); + clk_div = 1; spi_engine_program_add_cmd(p, dry, @@ -252,7 +262,7 @@ static void spi_engine_compile_message(struct spi_message *msg, bool dry, spi_engine_gen_xfer(p, dry, xfer); spi_engine_gen_sleep(p, dry, spi_delay_to_ns(&xfer->delay, xfer), - xfer->effective_speed_hz); + inst_ns, xfer->effective_speed_hz); if (xfer->cs_change) { if (list_is_last(&xfer->transfer_list, &msg->transfers)) { @@ -262,7 +272,7 @@ static void spi_engine_compile_message(struct spi_message *msg, bool dry, spi_engine_gen_cs(p, dry, spi, false); spi_engine_gen_sleep(p, dry, spi_delay_to_ns( - &xfer->cs_change_delay, xfer), + &xfer->cs_change_delay, xfer), inst_ns, xfer->effective_speed_hz); if (!list_next_entry(xfer, transfer_list)->cs_off) diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c index be3998104bfb..f7e8b5efa50e 100644 --- a/drivers/spi/spi-davinci.c +++ b/drivers/spi/spi-davinci.c @@ -984,6 +984,9 @@ static int davinci_spi_probe(struct platform_device *pdev) return ret; free_dma: + /* This bit needs to be cleared to disable dpsi->clk */ + clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK); + if (dspi->dma_rx) { dma_release_channel(dspi->dma_rx); dma_release_channel(dspi->dma_tx); @@ -1013,6 +1016,9 @@ static void davinci_spi_remove(struct platform_device *pdev) spi_bitbang_stop(&dspi->bitbang); + /* This bit needs to be cleared to disable dpsi->clk */ + clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK); + if (dspi->dma_rx) { dma_release_channel(dspi->dma_rx); dma_release_channel(dspi->dma_tx); diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 33164ebdb583..1439883326cf 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -1050,7 +1050,7 @@ static struct spi_imx_devtype_data imx35_cspi_devtype_data = { .rx_available = mx31_rx_available, .reset = mx31_reset, .fifo_size = 8, - .has_dmamode = true, + .has_dmamode = false, .dynamic_burst = false, .has_targetmode = false, .devtype = IMX35_CSPI, diff --git a/drivers/spi/spi-mux.c b/drivers/spi/spi-mux.c index 5d72e3d59df8..c02c4204442f 100644 --- a/drivers/spi/spi-mux.c +++ b/drivers/spi/spi-mux.c @@ -158,12 +158,14 @@ static int spi_mux_probe(struct spi_device *spi) /* supported modes are the same as our parent's */ ctlr->mode_bits = spi->controller->mode_bits; ctlr->flags = spi->controller->flags; + ctlr->bits_per_word_mask = spi->controller->bits_per_word_mask; ctlr->transfer_one_message = spi_mux_transfer_one_message; ctlr->setup = spi_mux_setup; ctlr->num_chipselect = mux_control_states(priv->mux); ctlr->bus_num = -1; ctlr->dev.of_node = spi->dev.of_node; ctlr->must_async = true; + ctlr->defer_optimize_message = true; ret = devm_spi_register_controller(&spi->dev, ctlr); if (ret) diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index 7e3083b83534..002f29dbcea6 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -1277,24 +1277,11 @@ static int omap2_mcspi_prepare_message(struct spi_controller *ctlr, /* * Check if this transfer contains only one word; - * OR contains 1 to 4 words, with bits_per_word == 8 and no delay between each word - * OR contains 1 to 2 words, with bits_per_word == 16 and no delay between each word - * - * If one of the two last case is true, this also change the bits_per_word of this - * transfer to make it a bit faster. - * It's not an issue to change the bits_per_word here even if the multi-mode is not - * applicable for this message, the signal on the wire will be the same. */ if (bits_per_word < 8 && tr->len == 1) { /* multi-mode is applicable, only one word (1..7 bits) */ - } else if (tr->word_delay.value == 0 && bits_per_word == 8 && tr->len <= 4) { - /* multi-mode is applicable, only one "bigger" word (8,16,24,32 bits) */ - tr->bits_per_word = tr->len * bits_per_word; - } else if (tr->word_delay.value == 0 && bits_per_word == 16 && tr->len <= 2) { - /* multi-mode is applicable, only one "bigger" word (16,32 bits) */ - tr->bits_per_word = tr->len * bits_per_word / 2; } else if (bits_per_word >= 8 && tr->len == bits_per_word / 8) { - /* multi-mode is applicable, only one word (9..15,17..32 bits) */ + /* multi-mode is applicable, only one word (8..32 bits) */ } else { /* multi-mode is not applicable: more than one word in the transfer */ mcspi->use_multi_mode = false; diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index fc13fa192189..0f04e832f9ec 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -2151,7 +2151,8 @@ static void __spi_unoptimize_message(struct spi_message *msg) */ static void spi_maybe_unoptimize_message(struct spi_message *msg) { - if (!msg->pre_optimized && msg->optimized) + if (!msg->pre_optimized && msg->optimized && + !msg->spi->controller->defer_optimize_message) __spi_unoptimize_message(msg); } @@ -4294,6 +4295,11 @@ static int __spi_optimize_message(struct spi_device *spi, static int spi_maybe_optimize_message(struct spi_device *spi, struct spi_message *msg) { + if (spi->controller->defer_optimize_message) { + msg->spi = spi; + return 0; + } + if (msg->pre_optimized) return 0; @@ -4324,6 +4330,13 @@ int spi_optimize_message(struct spi_device *spi, struct spi_message *msg) { int ret; + /* + * Pre-optimization is not supported and optimization is deferred e.g. + * when using spi-mux. + */ + if (spi->controller->defer_optimize_message) + return 0; + ret = __spi_optimize_message(spi, msg); if (ret) return ret; @@ -4350,6 +4363,9 @@ EXPORT_SYMBOL_GPL(spi_optimize_message); */ void spi_unoptimize_message(struct spi_message *msg) { + if (msg->spi->controller->defer_optimize_message) + return; + __spi_unoptimize_message(msg); msg->pre_optimized = false; } @@ -4432,8 +4448,6 @@ int spi_async(struct spi_device *spi, struct spi_message *message) spin_unlock_irqrestore(&ctlr->bus_lock_spinlock, flags); - spi_maybe_unoptimize_message(message); - return ret; } EXPORT_SYMBOL_GPL(spi_async); |