diff options
Diffstat (limited to 'drivers/pinctrl/bcm/pinctrl-bcm2835.c')
| -rw-r--r-- | drivers/pinctrl/bcm/pinctrl-bcm2835.c | 95 |
1 files changed, 58 insertions, 37 deletions
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c index 785c366fd6d6..a0b1f5f9b8aa 100644 --- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c +++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c @@ -36,11 +36,13 @@ #include <linux/pinctrl/pinconf.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> +#include <linux/pinctrl/pinconf-generic.h> #include <linux/platform_device.h> #include <linux/seq_file.h> #include <linux/slab.h> #include <linux/spinlock.h> #include <linux/types.h> +#include <dt-bindings/pinctrl/bcm2835.h> #define MODULE_NAME "pinctrl-bcm2835" #define BCM2835_NUM_GPIOS 54 @@ -72,13 +74,9 @@ enum bcm2835_pinconf_param { /* argument: bcm2835_pinconf_pull */ - BCM2835_PINCONF_PARAM_PULL, + BCM2835_PINCONF_PARAM_PULL = (PIN_CONFIG_END + 1), }; -#define BCM2835_PINCONF_PACK(_param_, _arg_) ((_param_) << 16 | (_arg_)) -#define BCM2835_PINCONF_UNPACK_PARAM(_conf_) ((_conf_) >> 16) -#define BCM2835_PINCONF_UNPACK_ARG(_conf_) ((_conf_) & 0xffff) - struct bcm2835_pinctrl { struct device *dev; void __iomem *base; @@ -213,14 +211,6 @@ static const char * const bcm2835_gpio_groups[] = { }; enum bcm2835_fsel { - BCM2835_FSEL_GPIO_IN = 0, - BCM2835_FSEL_GPIO_OUT = 1, - BCM2835_FSEL_ALT0 = 4, - BCM2835_FSEL_ALT1 = 5, - BCM2835_FSEL_ALT2 = 6, - BCM2835_FSEL_ALT3 = 7, - BCM2835_FSEL_ALT4 = 3, - BCM2835_FSEL_ALT5 = 2, BCM2835_FSEL_COUNT = 8, BCM2835_FSEL_MASK = 0x7, }; @@ -714,7 +704,7 @@ static int bcm2835_pctl_dt_node_to_map_pull(struct bcm2835_pinctrl *pc, configs = kzalloc(sizeof(*configs), GFP_KERNEL); if (!configs) return -ENOMEM; - configs[0] = BCM2835_PINCONF_PACK(BCM2835_PINCONF_PARAM_PULL, pull); + configs[0] = pinconf_to_config_packed(BCM2835_PINCONF_PARAM_PULL, pull); map->type = PIN_MAP_TYPE_CONFIGS_PIN; map->data.configs.group_or_pin = bcm2835_gpio_pins[pin].name; @@ -727,7 +717,7 @@ static int bcm2835_pctl_dt_node_to_map_pull(struct bcm2835_pinctrl *pc, static int bcm2835_pctl_dt_node_to_map(struct pinctrl_dev *pctldev, struct device_node *np, - struct pinctrl_map **map, unsigned *num_maps) + struct pinctrl_map **map, unsigned int *num_maps) { struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); struct property *pins, *funcs, *pulls; @@ -736,6 +726,12 @@ static int bcm2835_pctl_dt_node_to_map(struct pinctrl_dev *pctldev, int i, err; u32 pin, func, pull; + /* Check for generic binding in this node */ + err = pinconf_generic_dt_node_to_map_all(pctldev, np, map, num_maps); + if (err || *num_maps) + return err; + + /* Generic binding did not find anything continue with legacy parse */ pins = of_find_property(np, "brcm,pins", NULL); if (!pins) { dev_err(pc->dev, "%pOF: missing brcm,pins property\n", np); @@ -917,37 +913,62 @@ static int bcm2835_pinconf_get(struct pinctrl_dev *pctldev, return -ENOTSUPP; } +static void bcm2835_pull_config_set(struct bcm2835_pinctrl *pc, + unsigned int pin, unsigned int arg) +{ + u32 off, bit; + + off = GPIO_REG_OFFSET(pin); + bit = GPIO_REG_SHIFT(pin); + + bcm2835_gpio_wr(pc, GPPUD, arg & 3); + /* + * BCM2835 datasheet say to wait 150 cycles, but not of what. + * But the VideoCore firmware delay for this operation + * based nearly on the same amount of VPU cycles and this clock + * runs at 250 MHz. + */ + udelay(1); + bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), BIT(bit)); + udelay(1); + bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), 0); +} + static int bcm2835_pinconf_set(struct pinctrl_dev *pctldev, - unsigned pin, unsigned long *configs, - unsigned num_configs) + unsigned int pin, unsigned long *configs, + unsigned int num_configs) { struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev); - enum bcm2835_pinconf_param param; - u16 arg; - u32 off, bit; + u32 param, arg; int i; for (i = 0; i < num_configs; i++) { - param = BCM2835_PINCONF_UNPACK_PARAM(configs[i]); - arg = BCM2835_PINCONF_UNPACK_ARG(configs[i]); + param = pinconf_to_config_param(configs[i]); + arg = pinconf_to_config_argument(configs[i]); - if (param != BCM2835_PINCONF_PARAM_PULL) - return -EINVAL; + switch (param) { + /* Set legacy brcm,pull */ + case BCM2835_PINCONF_PARAM_PULL: + bcm2835_pull_config_set(pc, pin, arg); + break; - off = GPIO_REG_OFFSET(pin); - bit = GPIO_REG_SHIFT(pin); + /* Set pull generic bindings */ + case PIN_CONFIG_BIAS_DISABLE: + bcm2835_pull_config_set(pc, pin, BCM2835_PUD_OFF); + break; - bcm2835_gpio_wr(pc, GPPUD, arg & 3); - /* - * BCM2835 datasheet say to wait 150 cycles, but not of what. - * But the VideoCore firmware delay for this operation - * based nearly on the same amount of VPU cycles and this clock - * runs at 250 MHz. - */ - udelay(1); - bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), BIT(bit)); - udelay(1); - bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), 0); + case PIN_CONFIG_BIAS_PULL_DOWN: + bcm2835_pull_config_set(pc, pin, BCM2835_PUD_DOWN); + break; + + case PIN_CONFIG_BIAS_PULL_UP: + bcm2835_pull_config_set(pc, pin, BCM2835_PUD_UP); + break; + + default: + return -EINVAL; + + } /* switch param type */ } /* for each config */ return 0; |