diff options
Diffstat (limited to 'drivers/phy')
39 files changed, 4464 insertions, 310 deletions
diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig index 23fe1cda2f70..4c08c1ccdd04 100644 --- a/drivers/phy/amlogic/Kconfig +++ b/drivers/phy/amlogic/Kconfig @@ -36,3 +36,25 @@ config PHY_MESON_GXL_USB3 Enable this to support the Meson USB3 PHY and OTG detection IP block found in Meson GXL and GXM SoCs. If unsure, say N. + +config PHY_MESON_G12A_USB2 + tristate "Meson G12A USB2 PHY driver" + default ARCH_MESON + depends on OF && (ARCH_MESON || COMPILE_TEST) + select GENERIC_PHY + select REGMAP_MMIO + help + Enable this to support the Meson USB2 PHYs found in Meson + G12A SoCs. + If unsure, say N. + +config PHY_MESON_G12A_USB3_PCIE + tristate "Meson G12A USB3+PCIE Combo PHY driver" + default ARCH_MESON + depends on OF && (ARCH_MESON || COMPILE_TEST) + select GENERIC_PHY + select REGMAP_MMIO + help + Enable this to support the Meson USB3 + PCIE Combo PHY found + in Meson G12A SoCs. + If unsure, say N. diff --git a/drivers/phy/amlogic/Makefile b/drivers/phy/amlogic/Makefile index 4fd8848c194d..fdd008e1b19b 100644 --- a/drivers/phy/amlogic/Makefile +++ b/drivers/phy/amlogic/Makefile @@ -1,3 +1,5 @@ obj-$(CONFIG_PHY_MESON8B_USB2) += phy-meson8b-usb2.o obj-$(CONFIG_PHY_MESON_GXL_USB2) += phy-meson-gxl-usb2.o +obj-$(CONFIG_PHY_MESON_G12A_USB2) += phy-meson-g12a-usb2.o obj-$(CONFIG_PHY_MESON_GXL_USB3) += phy-meson-gxl-usb3.o +obj-$(CONFIG_PHY_MESON_G12A_USB3_PCIE) += phy-meson-g12a-usb3-pcie.o diff --git a/drivers/phy/amlogic/phy-meson-g12a-usb2.c b/drivers/phy/amlogic/phy-meson-g12a-usb2.c new file mode 100644 index 000000000000..9065ffc85eb4 --- /dev/null +++ b/drivers/phy/amlogic/phy-meson-g12a-usb2.c @@ -0,0 +1,341 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Meson G12A USB2 PHY driver + * + * Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com> + * Copyright (C) 2017 Amlogic, Inc. All rights reserved + * Copyright (C) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +#include <linux/bitfield.h> +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/regmap.h> +#include <linux/reset.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> + +#define PHY_CTRL_R0 0x0 +#define PHY_CTRL_R1 0x4 +#define PHY_CTRL_R2 0x8 +#define PHY_CTRL_R3 0xc + #define PHY_CTRL_R3_SQUELCH_REF GENMASK(1, 0) + #define PHY_CTRL_R3_HSDIC_REF GENMASK(3, 2) + #define PHY_CTRL_R3_DISC_THRESH GENMASK(7, 4) + +#define PHY_CTRL_R4 0x10 + #define PHY_CTRL_R4_CALIB_CODE_7_0 GENMASK(7, 0) + #define PHY_CTRL_R4_CALIB_CODE_15_8 GENMASK(15, 8) + #define PHY_CTRL_R4_CALIB_CODE_23_16 GENMASK(23, 16) + #define PHY_CTRL_R4_I_C2L_CAL_EN BIT(24) + #define PHY_CTRL_R4_I_C2L_CAL_RESET_N BIT(25) + #define PHY_CTRL_R4_I_C2L_CAL_DONE BIT(26) + #define PHY_CTRL_R4_TEST_BYPASS_MODE_EN BIT(27) + #define PHY_CTRL_R4_I_C2L_BIAS_TRIM_1_0 GENMASK(29, 28) + #define PHY_CTRL_R4_I_C2L_BIAS_TRIM_3_2 GENMASK(31, 30) + +#define PHY_CTRL_R5 0x14 +#define PHY_CTRL_R6 0x18 +#define PHY_CTRL_R7 0x1c +#define PHY_CTRL_R8 0x20 +#define PHY_CTRL_R9 0x24 +#define PHY_CTRL_R10 0x28 +#define PHY_CTRL_R11 0x2c +#define PHY_CTRL_R12 0x30 +#define PHY_CTRL_R13 0x34 + #define PHY_CTRL_R13_CUSTOM_PATTERN_19 GENMASK(7, 0) + #define PHY_CTRL_R13_LOAD_STAT BIT(14) + #define PHY_CTRL_R13_UPDATE_PMA_SIGNALS BIT(15) + #define PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET GENMASK(20, 16) + #define PHY_CTRL_R13_CLEAR_HOLD_HS_DISCONNECT BIT(21) + #define PHY_CTRL_R13_BYPASS_HOST_DISCONNECT_VAL BIT(22) + #define PHY_CTRL_R13_BYPASS_HOST_DISCONNECT_EN BIT(23) + #define PHY_CTRL_R13_I_C2L_HS_EN BIT(24) + #define PHY_CTRL_R13_I_C2L_FS_EN BIT(25) + #define PHY_CTRL_R13_I_C2L_LS_EN BIT(26) + #define PHY_CTRL_R13_I_C2L_HS_OE BIT(27) + #define PHY_CTRL_R13_I_C2L_FS_OE BIT(28) + #define PHY_CTRL_R13_I_C2L_HS_RX_EN BIT(29) + #define PHY_CTRL_R13_I_C2L_FSLS_RX_EN BIT(30) + +#define PHY_CTRL_R14 0x38 + #define PHY_CTRL_R14_I_RDP_EN BIT(0) + #define PHY_CTRL_R14_I_RPU_SW1_EN BIT(1) + #define PHY_CTRL_R14_I_RPU_SW2_EN GENMASK(2, 3) + #define PHY_CTRL_R14_PG_RSTN BIT(4) + #define PHY_CTRL_R14_I_C2L_DATA_16_8 BIT(5) + #define PHY_CTRL_R14_I_C2L_ASSERT_SINGLE_EN_ZERO BIT(6) + #define PHY_CTRL_R14_BYPASS_CTRL_7_0 GENMASK(15, 8) + #define PHY_CTRL_R14_BYPASS_CTRL_15_8 GENMASK(23, 16) + +#define PHY_CTRL_R15 0x3c +#define PHY_CTRL_R16 0x40 + #define PHY_CTRL_R16_MPLL_M GENMASK(8, 0) + #define PHY_CTRL_R16_MPLL_N GENMASK(14, 10) + #define PHY_CTRL_R16_MPLL_TDC_MODE BIT(20) + #define PHY_CTRL_R16_MPLL_SDM_EN BIT(21) + #define PHY_CTRL_R16_MPLL_LOAD BIT(22) + #define PHY_CTRL_R16_MPLL_DCO_SDM_EN BIT(23) + #define PHY_CTRL_R16_MPLL_LOCK_LONG GENMASK(25, 24) + #define PHY_CTRL_R16_MPLL_LOCK_F BIT(26) + #define PHY_CTRL_R16_MPLL_FAST_LOCK BIT(27) + #define PHY_CTRL_R16_MPLL_EN BIT(28) + #define PHY_CTRL_R16_MPLL_RESET BIT(29) + #define PHY_CTRL_R16_MPLL_LOCK BIT(30) + #define PHY_CTRL_R16_MPLL_LOCK_DIG BIT(31) + +#define PHY_CTRL_R17 0x44 + #define PHY_CTRL_R17_MPLL_FRAC_IN GENMASK(13, 0) + #define PHY_CTRL_R17_MPLL_FIX_EN BIT(16) + #define PHY_CTRL_R17_MPLL_LAMBDA1 GENMASK(19, 17) + #define PHY_CTRL_R17_MPLL_LAMBDA0 GENMASK(22, 20) + #define PHY_CTRL_R17_MPLL_FILTER_MODE BIT(23) + #define PHY_CTRL_R17_MPLL_FILTER_PVT2 GENMASK(27, 24) + #define PHY_CTRL_R17_MPLL_FILTER_PVT1 GENMASK(31, 28) + +#define PHY_CTRL_R18 0x48 + #define PHY_CTRL_R18_MPLL_LKW_SEL GENMASK(1, 0) + #define PHY_CTRL_R18_MPLL_LK_W GENMASK(5, 2) + #define PHY_CTRL_R18_MPLL_LK_S GENMASK(11, 6) + #define PHY_CTRL_R18_MPLL_DCO_M_EN BIT(12) + #define PHY_CTRL_R18_MPLL_DCO_CLK_SEL BIT(13) + #define PHY_CTRL_R18_MPLL_PFD_GAIN GENMASK(15, 14) + #define PHY_CTRL_R18_MPLL_ROU GENMASK(18, 16) + #define PHY_CTRL_R18_MPLL_DATA_SEL GENMASK(21, 19) + #define PHY_CTRL_R18_MPLL_BIAS_ADJ GENMASK(23, 22) + #define PHY_CTRL_R18_MPLL_BB_MODE GENMASK(25, 24) + #define PHY_CTRL_R18_MPLL_ALPHA GENMASK(28, 26) + #define PHY_CTRL_R18_MPLL_ADJ_LDO GENMASK(30, 29) + #define PHY_CTRL_R18_MPLL_ACG_RANGE BIT(31) + +#define PHY_CTRL_R19 0x4c +#define PHY_CTRL_R20 0x50 + #define PHY_CTRL_R20_USB2_IDDET_EN BIT(0) + #define PHY_CTRL_R20_USB2_OTG_VBUS_TRIM_2_0 GENMASK(3, 1) + #define PHY_CTRL_R20_USB2_OTG_VBUSDET_EN BIT(4) + #define PHY_CTRL_R20_USB2_AMON_EN BIT(5) + #define PHY_CTRL_R20_USB2_CAL_CODE_R5 BIT(6) + #define PHY_CTRL_R20_BYPASS_OTG_DET BIT(7) + #define PHY_CTRL_R20_USB2_DMON_EN BIT(8) + #define PHY_CTRL_R20_USB2_DMON_SEL_3_0 GENMASK(12, 9) + #define PHY_CTRL_R20_USB2_EDGE_DRV_EN BIT(13) + #define PHY_CTRL_R20_USB2_EDGE_DRV_TRIM_1_0 GENMASK(15, 14) + #define PHY_CTRL_R20_USB2_BGR_ADJ_4_0 GENMASK(20, 16) + #define PHY_CTRL_R20_USB2_BGR_START BIT(21) + #define PHY_CTRL_R20_USB2_BGR_VREF_4_0 GENMASK(28, 24) + #define PHY_CTRL_R20_USB2_BGR_DBG_1_0 GENMASK(30, 29) + #define PHY_CTRL_R20_BYPASS_CAL_DONE_R5 BIT(31) + +#define PHY_CTRL_R21 0x54 + #define PHY_CTRL_R21_USB2_BGR_FORCE BIT(0) + #define PHY_CTRL_R21_USB2_CAL_ACK_EN BIT(1) + #define PHY_CTRL_R21_USB2_OTG_ACA_EN BIT(2) + #define PHY_CTRL_R21_USB2_TX_STRG_PD BIT(3) + #define PHY_CTRL_R21_USB2_OTG_ACA_TRIM_1_0 GENMASK(5, 4) + #define PHY_CTRL_R21_BYPASS_UTMI_CNTR GENMASK(15, 6) + #define PHY_CTRL_R21_BYPASS_UTMI_REG GENMASK(25, 20) + +#define PHY_CTRL_R22 0x58 +#define PHY_CTRL_R23 0x5c + +#define RESET_COMPLETE_TIME 1000 +#define PLL_RESET_COMPLETE_TIME 100 + +struct phy_meson_g12a_usb2_priv { + struct device *dev; + struct regmap *regmap; + struct clk *clk; + struct reset_control *reset; +}; + +static const struct regmap_config phy_meson_g12a_usb2_regmap_conf = { + .reg_bits = 8, + .val_bits = 32, + .reg_stride = 4, + .max_register = PHY_CTRL_R23, +}; + +static int phy_meson_g12a_usb2_init(struct phy *phy) +{ + struct phy_meson_g12a_usb2_priv *priv = phy_get_drvdata(phy); + int ret; + + ret = reset_control_reset(priv->reset); + if (ret) + return ret; + + udelay(RESET_COMPLETE_TIME); + + /* usb2_otg_aca_en == 0 */ + regmap_update_bits(priv->regmap, PHY_CTRL_R21, + PHY_CTRL_R21_USB2_OTG_ACA_EN, 0); + + /* PLL Setup : 24MHz * 20 / 1 = 480MHz */ + regmap_write(priv->regmap, PHY_CTRL_R16, + FIELD_PREP(PHY_CTRL_R16_MPLL_M, 20) | + FIELD_PREP(PHY_CTRL_R16_MPLL_N, 1) | + PHY_CTRL_R16_MPLL_LOAD | + FIELD_PREP(PHY_CTRL_R16_MPLL_LOCK_LONG, 1) | + PHY_CTRL_R16_MPLL_FAST_LOCK | + PHY_CTRL_R16_MPLL_EN | + PHY_CTRL_R16_MPLL_RESET); + + regmap_write(priv->regmap, PHY_CTRL_R17, + FIELD_PREP(PHY_CTRL_R17_MPLL_FRAC_IN, 0) | + FIELD_PREP(PHY_CTRL_R17_MPLL_LAMBDA1, 7) | + FIELD_PREP(PHY_CTRL_R17_MPLL_LAMBDA0, 7) | + FIELD_PREP(PHY_CTRL_R17_MPLL_FILTER_PVT2, 2) | + FIELD_PREP(PHY_CTRL_R17_MPLL_FILTER_PVT1, 9)); + + regmap_write(priv->regmap, PHY_CTRL_R18, + FIELD_PREP(PHY_CTRL_R18_MPLL_LKW_SEL, 1) | + FIELD_PREP(PHY_CTRL_R18_MPLL_LK_W, 9) | + FIELD_PREP(PHY_CTRL_R18_MPLL_LK_S, 0x27) | + FIELD_PREP(PHY_CTRL_R18_MPLL_PFD_GAIN, 1) | + FIELD_PREP(PHY_CTRL_R18_MPLL_ROU, 7) | + FIELD_PREP(PHY_CTRL_R18_MPLL_DATA_SEL, 3) | + FIELD_PREP(PHY_CTRL_R18_MPLL_BIAS_ADJ, 1) | + FIELD_PREP(PHY_CTRL_R18_MPLL_BB_MODE, 0) | + FIELD_PREP(PHY_CTRL_R18_MPLL_ALPHA, 3) | + FIELD_PREP(PHY_CTRL_R18_MPLL_ADJ_LDO, 1) | + PHY_CTRL_R18_MPLL_ACG_RANGE); + + udelay(PLL_RESET_COMPLETE_TIME); + + /* UnReset PLL */ + regmap_write(priv->regmap, PHY_CTRL_R16, + FIELD_PREP(PHY_CTRL_R16_MPLL_M, 20) | + FIELD_PREP(PHY_CTRL_R16_MPLL_N, 1) | + PHY_CTRL_R16_MPLL_LOAD | + FIELD_PREP(PHY_CTRL_R16_MPLL_LOCK_LONG, 1) | + PHY_CTRL_R16_MPLL_FAST_LOCK | + PHY_CTRL_R16_MPLL_EN); + + /* PHY Tuning */ + regmap_write(priv->regmap, PHY_CTRL_R20, + FIELD_PREP(PHY_CTRL_R20_USB2_OTG_VBUS_TRIM_2_0, 4) | + PHY_CTRL_R20_USB2_OTG_VBUSDET_EN | + FIELD_PREP(PHY_CTRL_R20_USB2_DMON_SEL_3_0, 15) | + PHY_CTRL_R20_USB2_EDGE_DRV_EN | + FIELD_PREP(PHY_CTRL_R20_USB2_EDGE_DRV_TRIM_1_0, 3) | + FIELD_PREP(PHY_CTRL_R20_USB2_BGR_ADJ_4_0, 0) | + FIELD_PREP(PHY_CTRL_R20_USB2_BGR_VREF_4_0, 0) | + FIELD_PREP(PHY_CTRL_R20_USB2_BGR_DBG_1_0, 0)); + + regmap_write(priv->regmap, PHY_CTRL_R4, + FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_7_0, 0xf) | + FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_15_8, 0xf) | + FIELD_PREP(PHY_CTRL_R4_CALIB_CODE_23_16, 0xf) | + PHY_CTRL_R4_TEST_BYPASS_MODE_EN | + FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_1_0, 0) | + FIELD_PREP(PHY_CTRL_R4_I_C2L_BIAS_TRIM_3_2, 0)); + + /* Tuning Disconnect Threshold */ + regmap_write(priv->regmap, PHY_CTRL_R3, + FIELD_PREP(PHY_CTRL_R3_SQUELCH_REF, 0) | + FIELD_PREP(PHY_CTRL_R3_HSDIC_REF, 1) | + FIELD_PREP(PHY_CTRL_R3_DISC_THRESH, 3)); + + /* Analog Settings */ + regmap_write(priv->regmap, PHY_CTRL_R14, 0); + regmap_write(priv->regmap, PHY_CTRL_R13, + PHY_CTRL_R13_UPDATE_PMA_SIGNALS | + FIELD_PREP(PHY_CTRL_R13_MIN_COUNT_FOR_SYNC_DET, 7)); + + return 0; +} + +static int phy_meson_g12a_usb2_exit(struct phy *phy) +{ + struct phy_meson_g12a_usb2_priv *priv = phy_get_drvdata(phy); + + return reset_control_reset(priv->reset); +} + +/* set_mode is not needed, mode setting is handled via the UTMI bus */ +static const struct phy_ops phy_meson_g12a_usb2_ops = { + .init = phy_meson_g12a_usb2_init, + .exit = phy_meson_g12a_usb2_exit, + .owner = THIS_MODULE, +}; + +static int phy_meson_g12a_usb2_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct phy_provider *phy_provider; + struct resource *res; + struct phy_meson_g12a_usb2_priv *priv; + struct phy *phy; + void __iomem *base; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = dev; + platform_set_drvdata(pdev, priv); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + priv->regmap = devm_regmap_init_mmio(dev, base, + &phy_meson_g12a_usb2_regmap_conf); + if (IS_ERR(priv->regmap)) + return PTR_ERR(priv->regmap); + + priv->clk = devm_clk_get(dev, "xtal"); + if (IS_ERR(priv->clk)) + return PTR_ERR(priv->clk); + + priv->reset = devm_reset_control_get(dev, "phy"); + if (IS_ERR(priv->reset)) + return PTR_ERR(priv->reset); + + ret = reset_control_deassert(priv->reset); + if (ret) + return ret; + + phy = devm_phy_create(dev, NULL, &phy_meson_g12a_usb2_ops); + if (IS_ERR(phy)) { + ret = PTR_ERR(phy); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to create PHY\n"); + + return ret; + } + + phy_set_bus_width(phy, 8); + phy_set_drvdata(phy, priv); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id phy_meson_g12a_usb2_of_match[] = { + { .compatible = "amlogic,g12a-usb2-phy", }, + { }, +}; +MODULE_DEVICE_TABLE(of, phy_meson_g12a_usb2_of_match); + +static struct platform_driver phy_meson_g12a_usb2_driver = { + .probe = phy_meson_g12a_usb2_probe, + .driver = { + .name = "phy-meson-g12a-usb2", + .of_match_table = phy_meson_g12a_usb2_of_match, + }, +}; +module_platform_driver(phy_meson_g12a_usb2_driver); + +MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>"); +MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>"); +MODULE_DESCRIPTION("Meson G12A USB2 PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c new file mode 100644 index 000000000000..6233a7979a93 --- /dev/null +++ b/drivers/phy/amlogic/phy-meson-g12a-usb3-pcie.c @@ -0,0 +1,413 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Amlogic G12A USB3 + PCIE Combo PHY driver + * + * Copyright (C) 2017 Amlogic, Inc. All rights reserved + * Copyright (C) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +#include <linux/bitfield.h> +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/phy/phy.h> +#include <linux/regmap.h> +#include <linux/reset.h> +#include <linux/platform_device.h> +#include <dt-bindings/phy/phy.h> + +#define PHY_R0 0x00 + #define PHY_R0_PCIE_POWER_STATE GENMASK(4, 0) + #define PHY_R0_PCIE_USB3_SWITCH GENMASK(6, 5) + +#define PHY_R1 0x04 + #define PHY_R1_PHY_TX1_TERM_OFFSET GENMASK(4, 0) + #define PHY_R1_PHY_TX0_TERM_OFFSET GENMASK(9, 5) + #define PHY_R1_PHY_RX1_EQ GENMASK(12, 10) + #define PHY_R1_PHY_RX0_EQ GENMASK(15, 13) + #define PHY_R1_PHY_LOS_LEVEL GENMASK(20, 16) + #define PHY_R1_PHY_LOS_BIAS GENMASK(23, 21) + #define PHY_R1_PHY_REF_CLKDIV2 BIT(24) + #define PHY_R1_PHY_MPLL_MULTIPLIER GENMASK(31, 25) + +#define PHY_R2 0x08 + #define PHY_R2_PCS_TX_DEEMPH_GEN2_6DB GENMASK(5, 0) + #define PHY_R2_PCS_TX_DEEMPH_GEN2_3P5DB GENMASK(11, 6) + #define PHY_R2_PCS_TX_DEEMPH_GEN1 GENMASK(17, 12) + #define PHY_R2_PHY_TX_VBOOST_LVL GENMASK(20, 18) + +#define PHY_R4 0x10 + #define PHY_R4_PHY_CR_WRITE BIT(0) + #define PHY_R4_PHY_CR_READ BIT(1) + #define PHY_R4_PHY_CR_DATA_IN GENMASK(17, 2) + #define PHY_R4_PHY_CR_CAP_DATA BIT(18) + #define PHY_R4_PHY_CR_CAP_ADDR BIT(19) + +#define PHY_R5 0x14 + #define PHY_R5_PHY_CR_DATA_OUT GENMASK(15, 0) + #define PHY_R5_PHY_CR_ACK BIT(16) + #define PHY_R5_PHY_BS_OUT BIT(17) + +struct phy_g12a_usb3_pcie_priv { + struct regmap *regmap; + struct regmap *regmap_cr; + struct clk *clk_ref; + struct reset_control *reset; + struct phy *phy; + unsigned int mode; +}; + +static const struct regmap_config phy_g12a_usb3_pcie_regmap_conf = { + .reg_bits = 8, + .val_bits = 32, + .reg_stride = 4, + .max_register = PHY_R5, +}; + +static int phy_g12a_usb3_pcie_cr_bus_addr(struct phy_g12a_usb3_pcie_priv *priv, + unsigned int addr) +{ + unsigned int val, reg; + int ret; + + reg = FIELD_PREP(PHY_R4_PHY_CR_DATA_IN, addr); + + regmap_write(priv->regmap, PHY_R4, reg); + regmap_write(priv->regmap, PHY_R4, reg); + + regmap_write(priv->regmap, PHY_R4, reg | PHY_R4_PHY_CR_CAP_ADDR); + + ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val, + (val & PHY_R5_PHY_CR_ACK), + 5, 1000); + if (ret) + return ret; + + regmap_write(priv->regmap, PHY_R4, reg); + + ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val, + !(val & PHY_R5_PHY_CR_ACK), + 5, 1000); + if (ret) + return ret; + + return 0; +} + +static int phy_g12a_usb3_pcie_cr_bus_read(void *context, unsigned int addr, + unsigned int *data) +{ + struct phy_g12a_usb3_pcie_priv *priv = context; + unsigned int val; + int ret; + + ret = phy_g12a_usb3_pcie_cr_bus_addr(priv, addr); + if (ret) + return ret; + + regmap_write(priv->regmap, PHY_R4, 0); + regmap_write(priv->regmap, PHY_R4, PHY_R4_PHY_CR_READ); + + ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val, + (val & PHY_R5_PHY_CR_ACK), + 5, 1000); + if (ret) + return ret; + + *data = FIELD_GET(PHY_R5_PHY_CR_DATA_OUT, val); + + regmap_write(priv->regmap, PHY_R4, 0); + + ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val, + !(val & PHY_R5_PHY_CR_ACK), + 5, 1000); + if (ret) + return ret; + + return 0; +} + +static int phy_g12a_usb3_pcie_cr_bus_write(void *context, unsigned int addr, + unsigned int data) +{ + struct phy_g12a_usb3_pcie_priv *priv = context; + unsigned int val, reg; + int ret; + + ret = phy_g12a_usb3_pcie_cr_bus_addr(priv, addr); + if (ret) + return ret; + + reg = FIELD_PREP(PHY_R4_PHY_CR_DATA_IN, data); + + regmap_write(priv->regmap, PHY_R4, reg); + regmap_write(priv->regmap, PHY_R4, reg); + + regmap_write(priv->regmap, PHY_R4, reg | PHY_R4_PHY_CR_CAP_DATA); + + ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val, + (val & PHY_R5_PHY_CR_ACK), + 5, 1000); + if (ret) + return ret; + + regmap_write(priv->regmap, PHY_R4, reg); + + ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val, + (val & PHY_R5_PHY_CR_ACK) == 0, + 5, 1000); + if (ret) + return ret; + + regmap_write(priv->regmap, PHY_R4, reg); + + regmap_write(priv->regmap, PHY_R4, reg | PHY_R4_PHY_CR_WRITE); + + ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val, + (val & PHY_R5_PHY_CR_ACK), + 5, 1000); + if (ret) + return ret; + + regmap_write(priv->regmap, PHY_R4, reg); + + ret = regmap_read_poll_timeout(priv->regmap, PHY_R5, val, + (val & PHY_R5_PHY_CR_ACK) == 0, + 5, 1000); + if (ret) + return ret; + + return 0; +} + +static const struct regmap_config phy_g12a_usb3_pcie_cr_regmap_conf = { + .reg_bits = 16, + .val_bits = 16, + .reg_read = phy_g12a_usb3_pcie_cr_bus_read, + .reg_write = phy_g12a_usb3_pcie_cr_bus_write, + .max_register = 0xffff, + .fast_io = true, +}; + +static int phy_g12a_usb3_init(struct phy *phy) +{ + struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy); + int data, ret; + + /* Switch PHY to USB3 */ + /* TODO figure out how to handle when PCIe was set in the bootloader */ + regmap_update_bits(priv->regmap, PHY_R0, + PHY_R0_PCIE_USB3_SWITCH, + PHY_R0_PCIE_USB3_SWITCH); + + /* + * WORKAROUND: There is SSPHY suspend bug due to + * which USB enumerates + * in HS mode instead of SS mode. Workaround it by asserting + * LANE0.TX_ALT_BLOCK.EN_ALT_BUS to enable TX to use alt bus + * mode + */ + ret = regmap_update_bits(priv->regmap_cr, 0x102d, BIT(7), BIT(7)); + if (ret) + return ret; + + ret = regmap_update_bits(priv->regmap_cr, 0x1010, 0xff0, 20); + if (ret) + return ret; + + /* + * Fix RX Equalization setting as follows + * LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0 + * LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1 + * LANE0.RX_OVRD_IN_HI.RX_EQ set to 3 + * LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1 + */ + ret = regmap_read(priv->regmap_cr, 0x1006, &data); + if (ret) + return ret; + + data &= ~BIT(6); + data |= BIT(7); + data &= ~(0x7 << 8); + data |= (0x3 << 8); + data |= (1 << 11); + ret = regmap_write(priv->regmap_cr, 0x1006, data); + if (ret) + return ret; + + /* + * Set EQ and TX launch amplitudes as follows + * LANE0.TX_OVRD_DRV_LO.PREEMPH set to 22 + * LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 127 + * LANE0.TX_OVRD_DRV_LO.EN set to 1. + */ + ret = regmap_read(priv->regmap_cr, 0x1002, &data); + if (ret) + return ret; + + data &= ~0x3f80; + data |= (0x16 << 7); + data &= ~0x7f; + data |= (0x7f | BIT(14)); + ret = regmap_write(priv->regmap_cr, 0x1002, data); + if (ret) + return ret; + + /* MPLL_LOOP_CTL.PROP_CNTRL = 8 */ + ret = regmap_update_bits(priv->regmap_cr, 0x30, 0xf << 4, 8 << 4); + if (ret) + return ret; + + regmap_update_bits(priv->regmap, PHY_R2, + PHY_R2_PHY_TX_VBOOST_LVL, + FIELD_PREP(PHY_R2_PHY_TX_VBOOST_LVL, 0x4)); + + regmap_update_bits(priv->regmap, PHY_R1, + PHY_R1_PHY_LOS_BIAS | PHY_R1_PHY_LOS_LEVEL, + FIELD_PREP(PHY_R1_PHY_LOS_BIAS, 4) | + FIELD_PREP(PHY_R1_PHY_LOS_LEVEL, 9)); + + return 0; +} + +static int phy_g12a_usb3_pcie_init(struct phy *phy) +{ + struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy); + int ret; + + ret = reset_control_reset(priv->reset); + if (ret) + return ret; + + if (priv->mode == PHY_TYPE_USB3) + return phy_g12a_usb3_init(phy); + + /* Power UP PCIE */ + /* TODO figure out when the bootloader has set USB3 mode before */ + regmap_update_bits(priv->regmap, PHY_R0, + PHY_R0_PCIE_POWER_STATE, + FIELD_PREP(PHY_R0_PCIE_POWER_STATE, 0x1c)); + + return 0; +} + +static int phy_g12a_usb3_pcie_exit(struct phy *phy) +{ + struct phy_g12a_usb3_pcie_priv *priv = phy_get_drvdata(phy); + + return reset_control_reset(priv->reset); +} + +static struct phy *phy_g12a_usb3_pcie_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct phy_g12a_usb3_pcie_priv *priv = dev_get_drvdata(dev); + unsigned int mode; + + if (args->args_count < 1) { + dev_err(dev, "invalid number of arguments\n"); + return ERR_PTR(-EINVAL); + } + + mode = args->args[0]; + + if (mode != PHY_TYPE_USB3 && mode != PHY_TYPE_PCIE) { + dev_err(dev, "invalid phy mode select argument\n"); + return ERR_PTR(-EINVAL); + } + + priv->mode = mode; + + return priv->phy; +} + +static const struct phy_ops phy_g12a_usb3_pcie_ops = { + .init = phy_g12a_usb3_pcie_init, + .exit = phy_g12a_usb3_pcie_exit, + .owner = THIS_MODULE, +}; + +static int phy_g12a_usb3_pcie_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct phy_g12a_usb3_pcie_priv *priv; + struct resource *res; + struct phy_provider *phy_provider; + void __iomem *base; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + priv->regmap = devm_regmap_init_mmio(dev, base, + &phy_g12a_usb3_pcie_regmap_conf); + if (IS_ERR(priv->regmap)) + return PTR_ERR(priv->regmap); + + priv->regmap_cr = devm_regmap_init(dev, NULL, priv, + &phy_g12a_usb3_pcie_cr_regmap_conf); + if (IS_ERR(priv->regmap_cr)) + return PTR_ERR(priv->regmap_cr); + + priv->clk_ref = devm_clk_get(dev, "ref_clk"); + if (IS_ERR(priv->clk_ref)) + return PTR_ERR(priv->clk_ref); + + ret = clk_prepare_enable(priv->clk_ref); + if (ret) + goto err_disable_clk_ref; + + priv->reset = devm_reset_control_array_get(dev, false, false); + if (IS_ERR(priv->reset)) + return PTR_ERR(priv->reset); + + priv->phy = devm_phy_create(dev, np, &phy_g12a_usb3_pcie_ops); + if (IS_ERR(priv->phy)) { + ret = PTR_ERR(priv->phy); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to create PHY\n"); + + return ret; + } + + phy_set_drvdata(priv->phy, priv); + dev_set_drvdata(dev, priv); + + phy_provider = devm_of_phy_provider_register(dev, + phy_g12a_usb3_pcie_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); + +err_disable_clk_ref: + clk_disable_unprepare(priv->clk_ref); + + return ret; +} + +static const struct of_device_id phy_g12a_usb3_pcie_of_match[] = { + { .compatible = "amlogic,g12a-usb3-pcie-phy", }, + { }, +}; +MODULE_DEVICE_TABLE(of, phy_g12a_usb3_pcie_of_match); + +static struct platform_driver phy_g12a_usb3_pcie_driver = { + .probe = phy_g12a_usb3_pcie_probe, + .driver = { + .name = "phy-g12a-usb3-pcie", + .of_match_table = phy_g12a_usb3_pcie_of_match, + }, +}; +module_platform_driver(phy_g12a_usb3_pcie_driver); + +MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>"); +MODULE_DESCRIPTION("Amlogic G12A USB3 + PCIE Combo PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb2.c b/drivers/phy/amlogic/phy-meson-gxl-usb2.c index 148ef0bdb9c1..4cbee412f2b0 100644 --- a/drivers/phy/amlogic/phy-meson-gxl-usb2.c +++ b/drivers/phy/amlogic/phy-meson-gxl-usb2.c @@ -261,14 +261,9 @@ static int phy_meson_gxl_usb2_probe(struct platform_device *pdev) if (IS_ERR(priv->regmap)) return PTR_ERR(priv->regmap); - priv->clk = devm_clk_get(dev, "phy"); - if (IS_ERR(priv->clk)) { - ret = PTR_ERR(priv->clk); - if (ret == -ENOENT) - priv->clk = NULL; - else - return ret; - } + priv->clk = devm_clk_get_optional(dev, "phy"); + if (IS_ERR(priv->clk)) + return PTR_ERR(priv->clk); priv->reset = devm_reset_control_get_optional_shared(dev, "phy"); if (IS_ERR(priv->reset)) diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig index aa917a61071d..f30f4819c3bb 100644 --- a/drivers/phy/broadcom/Kconfig +++ b/drivers/phy/broadcom/Kconfig @@ -10,6 +10,17 @@ config PHY_CYGNUS_PCIE Enable this to support the Broadcom Cygnus PCIe PHY. If unsure, say N. +config PHY_BCM_SR_USB + tristate "Broadcom Stingray USB PHY driver" + depends on OF && (ARCH_BCM_IPROC || COMPILE_TEST) + select GENERIC_PHY + default ARCH_BCM_IPROC + help + Enable this to support the Broadcom Stingray USB PHY + driver. It supports all versions of Superspeed and + Highspeed PHYs. + If unsure, say N. + config BCM_KONA_USB2_PHY tristate "Broadcom Kona USB2 PHY Driver" depends on HAS_IOMEM diff --git a/drivers/phy/broadcom/Makefile b/drivers/phy/broadcom/Makefile index 0f60184e6662..f453c7d3ffff 100644 --- a/drivers/phy/broadcom/Makefile +++ b/drivers/phy/broadcom/Makefile @@ -11,3 +11,4 @@ obj-$(CONFIG_PHY_BRCM_USB) += phy-brcm-usb-dvr.o phy-brcm-usb-dvr-objs := phy-brcm-usb.o phy-brcm-usb-init.o obj-$(CONFIG_PHY_BCM_SR_PCIE) += phy-bcm-sr-pcie.o +obj-$(CONFIG_PHY_BCM_SR_USB) += phy-bcm-sr-usb.o diff --git a/drivers/phy/broadcom/phy-bcm-sr-usb.c b/drivers/phy/broadcom/phy-bcm-sr-usb.c new file mode 100644 index 000000000000..fe6c58910e4c --- /dev/null +++ b/drivers/phy/broadcom/phy-bcm-sr-usb.c @@ -0,0 +1,394 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2016-2018 Broadcom + */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> + +enum bcm_usb_phy_version { + BCM_SR_USB_COMBO_PHY, + BCM_SR_USB_HS_PHY, +}; + +enum bcm_usb_phy_reg { + PLL_NDIV_FRAC, + PLL_NDIV_INT, + PLL_CTRL, + PHY_CTRL, + PHY_PLL_CTRL, +}; + +/* USB PHY registers */ + +static const u8 bcm_usb_combo_phy_ss[] = { + [PLL_CTRL] = 0x18, + [PHY_CTRL] = 0x14, +}; + +static const u8 bcm_usb_combo_phy_hs[] = { + [PLL_NDIV_FRAC] = 0x04, + [PLL_NDIV_INT] = 0x08, + [PLL_CTRL] = 0x0c, + [PHY_CTRL] = 0x10, +}; + +#define HSPLL_NDIV_INT_VAL 0x13 +#define HSPLL_NDIV_FRAC_VAL 0x1005 + +static const u8 bcm_usb_hs_phy[] = { + [PLL_NDIV_FRAC] = 0x0, + [PLL_NDIV_INT] = 0x4, + [PLL_CTRL] = 0x8, + [PHY_CTRL] = 0xc, +}; + +enum pll_ctrl_bits { + PLL_RESETB, + SSPLL_SUSPEND_EN, + PLL_SEQ_START, + PLL_LOCK, + PLL_PDIV, +}; + +static const u8 u3pll_ctrl[] = { + [PLL_RESETB] = 0, + [SSPLL_SUSPEND_EN] = 1, + [PLL_SEQ_START] = 2, + [PLL_LOCK] = 3, +}; + +#define HSPLL_PDIV_MASK 0xF +#define HSPLL_PDIV_VAL 0x1 + +static const u8 u2pll_ctrl[] = { + [PLL_PDIV] = 1, + [PLL_RESETB] = 5, + [PLL_LOCK] = 6, +}; + +enum bcm_usb_phy_ctrl_bits { + CORERDY, + AFE_LDO_PWRDWNB, + AFE_PLL_PWRDWNB, + AFE_BG_PWRDWNB, + PHY_ISO, + PHY_RESETB, + PHY_PCTL, +}; + +#define PHY_PCTL_MASK 0xffff +/* + * 0x0806 of PCTL_VAL has below bits set + * BIT-8 : refclk divider 1 + * BIT-3:2: device mode; mode is not effect + * BIT-1: soft reset active low + */ +#define HSPHY_PCTL_VAL 0x0806 +#define SSPHY_PCTL_VAL 0x0006 + +static const u8 u3phy_ctrl[] = { + [PHY_RESETB] = 1, + [PHY_PCTL] = 2, +}; + +static const u8 u2phy_ctrl[] = { + [CORERDY] = 0, + [AFE_LDO_PWRDWNB] = 1, + [AFE_PLL_PWRDWNB] = 2, + [AFE_BG_PWRDWNB] = 3, + [PHY_ISO] = 4, + [PHY_RESETB] = 5, + [PHY_PCTL] = 6, +}; + +struct bcm_usb_phy_cfg { + uint32_t type; + uint32_t version; + void __iomem *regs; + struct phy *phy; + const u8 *offset; +}; + +#define PLL_LOCK_RETRY_COUNT 1000 + +enum bcm_usb_phy_type { + USB_HS_PHY, + USB_SS_PHY, +}; + +#define NUM_BCM_SR_USB_COMBO_PHYS 2 + +static inline void bcm_usb_reg32_clrbits(void __iomem *addr, uint32_t clear) +{ + writel(readl(addr) & ~clear, addr); +} + +static inline void bcm_usb_reg32_setbits(void __iomem *addr, uint32_t set) +{ + writel(readl(addr) | set, addr); +} + +static int bcm_usb_pll_lock_check(void __iomem *addr, u32 bit) +{ + int retry; + u32 rd_data; + + retry = PLL_LOCK_RETRY_COUNT; + do { + rd_data = readl(addr); + if (rd_data & bit) + return 0; + udelay(1); + } while (--retry > 0); + + pr_err("%s: FAIL\n", __func__); + return -ETIMEDOUT; +} + +static int bcm_usb_ss_phy_init(struct bcm_usb_phy_cfg *phy_cfg) +{ + int ret = 0; + void __iomem *regs = phy_cfg->regs; + const u8 *offset; + u32 rd_data; + + offset = phy_cfg->offset; + + /* Set pctl with mode and soft reset */ + rd_data = readl(regs + offset[PHY_CTRL]); + rd_data &= ~(PHY_PCTL_MASK << u3phy_ctrl[PHY_PCTL]); + rd_data |= (SSPHY_PCTL_VAL << u3phy_ctrl[PHY_PCTL]); + writel(rd_data, regs + offset[PHY_CTRL]); + + bcm_usb_reg32_clrbits(regs + offset[PLL_CTRL], + BIT(u3pll_ctrl[SSPLL_SUSPEND_EN])); + bcm_usb_reg32_setbits(regs + offset[PLL_CTRL], + BIT(u3pll_ctrl[PLL_SEQ_START])); + bcm_usb_reg32_setbits(regs + offset[PLL_CTRL], + BIT(u3pll_ctrl[PLL_RESETB])); + + /* Maximum timeout for PLL reset done */ + msleep(30); + + ret = bcm_usb_pll_lock_check(regs + offset[PLL_CTRL], + BIT(u3pll_ctrl[PLL_LOCK])); + + return ret; +} + +static int bcm_usb_hs_phy_init(struct bcm_usb_phy_cfg *phy_cfg) +{ + int ret = 0; + void __iomem *regs = phy_cfg->regs; + const u8 *offset; + u32 rd_data; + + offset = phy_cfg->offset; + + writel(HSPLL_NDIV_INT_VAL, regs + offset[PLL_NDIV_INT]); + writel(HSPLL_NDIV_FRAC_VAL, regs + offset[PLL_NDIV_FRAC]); + + rd_data = readl(regs + offset[PLL_CTRL]); + rd_data &= ~(HSPLL_PDIV_MASK << u2pll_ctrl[PLL_PDIV]); + rd_data |= (HSPLL_PDIV_VAL << u2pll_ctrl[PLL_PDIV]); + writel(rd_data, regs + offset[PLL_CTRL]); + + /* Set Core Ready high */ + bcm_usb_reg32_setbits(regs + offset[PHY_CTRL], + BIT(u2phy_ctrl[CORERDY])); + + /* Maximum timeout for Core Ready done */ + msleep(30); + + bcm_usb_reg32_setbits(regs + offset[PLL_CTRL], + BIT(u2pll_ctrl[PLL_RESETB])); + bcm_usb_reg32_setbits(regs + offset[PHY_CTRL], + BIT(u2phy_ctrl[PHY_RESETB])); + + + rd_data = readl(regs + offset[PHY_CTRL]); + rd_data &= ~(PHY_PCTL_MASK << u2phy_ctrl[PHY_PCTL]); + rd_data |= (HSPHY_PCTL_VAL << u2phy_ctrl[PHY_PCTL]); + writel(rd_data, regs + offset[PHY_CTRL]); + + /* Maximum timeout for PLL reset done */ + msleep(30); + + ret = bcm_usb_pll_lock_check(regs + offset[PLL_CTRL], + BIT(u2pll_ctrl[PLL_LOCK])); + + return ret; +} + +static int bcm_usb_phy_reset(struct phy *phy) +{ + struct bcm_usb_phy_cfg *phy_cfg = phy_get_drvdata(phy); + void __iomem *regs = phy_cfg->regs; + const u8 *offset; + + offset = phy_cfg->offset; + + if (phy_cfg->type == USB_HS_PHY) { + bcm_usb_reg32_clrbits(regs + offset[PHY_CTRL], + BIT(u2phy_ctrl[CORERDY])); + bcm_usb_reg32_setbits(regs + offset[PHY_CTRL], + BIT(u2phy_ctrl[CORERDY])); + } + + return 0; +} + +static int bcm_usb_phy_init(struct phy *phy) +{ + struct bcm_usb_phy_cfg *phy_cfg = phy_get_drvdata(phy); + int ret = -EINVAL; + + if (phy_cfg->type == USB_SS_PHY) + ret = bcm_usb_ss_phy_init(phy_cfg); + else if (phy_cfg->type == USB_HS_PHY) + ret = bcm_usb_hs_phy_init(phy_cfg); + + return ret; +} + +static struct phy_ops sr_phy_ops = { + .init = bcm_usb_phy_init, + .reset = bcm_usb_phy_reset, + .owner = THIS_MODULE, +}; + +static struct phy *bcm_usb_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct bcm_usb_phy_cfg *phy_cfg; + int phy_idx; + + phy_cfg = dev_get_drvdata(dev); + if (!phy_cfg) + return ERR_PTR(-EINVAL); + + if (phy_cfg->version == BCM_SR_USB_COMBO_PHY) { + phy_idx = args->args[0]; + + if (WARN_ON(phy_idx > 1)) + return ERR_PTR(-ENODEV); + + return phy_cfg[phy_idx].phy; + } else + return phy_cfg->phy; +} + +static int bcm_usb_phy_create(struct device *dev, struct device_node *node, + void __iomem *regs, uint32_t version) +{ + struct bcm_usb_phy_cfg *phy_cfg; + int idx; + + if (version == BCM_SR_USB_COMBO_PHY) { + phy_cfg = devm_kzalloc(dev, NUM_BCM_SR_USB_COMBO_PHYS * + sizeof(struct bcm_usb_phy_cfg), + GFP_KERNEL); + if (!phy_cfg) + return -ENOMEM; + + for (idx = 0; idx < NUM_BCM_SR_USB_COMBO_PHYS; idx++) { + phy_cfg[idx].regs = regs; + phy_cfg[idx].version = version; + if (idx == 0) { + phy_cfg[idx].offset = bcm_usb_combo_phy_hs; + phy_cfg[idx].type = USB_HS_PHY; + } else { + phy_cfg[idx].offset = bcm_usb_combo_phy_ss; + phy_cfg[idx].type = USB_SS_PHY; + } + phy_cfg[idx].phy = devm_phy_create(dev, node, + &sr_phy_ops); + if (IS_ERR(phy_cfg[idx].phy)) + return PTR_ERR(phy_cfg[idx].phy); + + phy_set_drvdata(phy_cfg[idx].phy, &phy_cfg[idx]); + } + } else if (version == BCM_SR_USB_HS_PHY) { + phy_cfg = devm_kzalloc(dev, sizeof(struct bcm_usb_phy_cfg), + GFP_KERNEL); + if (!phy_cfg) + return -ENOMEM; + + phy_cfg->regs = regs; + phy_cfg->version = version; + phy_cfg->offset = bcm_usb_hs_phy; + phy_cfg->type = USB_HS_PHY; + phy_cfg->phy = devm_phy_create(dev, node, &sr_phy_ops); + if (IS_ERR(phy_cfg->phy)) + return PTR_ERR(phy_cfg->phy); + + phy_set_drvdata(phy_cfg->phy, phy_cfg); + } else + return -ENODEV; + + dev_set_drvdata(dev, phy_cfg); + + return 0; +} + +static const struct of_device_id bcm_usb_phy_of_match[] = { + { + .compatible = "brcm,sr-usb-combo-phy", + .data = (void *)BCM_SR_USB_COMBO_PHY, + }, + { + .compatible = "brcm,sr-usb-hs-phy", + .data = (void *)BCM_SR_USB_HS_PHY, + }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, bcm_usb_phy_of_match); + +static int bcm_usb_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *dn = dev->of_node; + const struct of_device_id *of_id; + struct resource *res; + void __iomem *regs; + int ret; + enum bcm_usb_phy_version version; + struct phy_provider *phy_provider; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + regs = devm_ioremap_resource(dev, res); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + of_id = of_match_node(bcm_usb_phy_of_match, dn); + if (of_id) + version = (enum bcm_usb_phy_version)of_id->data; + else + return -ENODEV; + + ret = bcm_usb_phy_create(dev, dn, regs, version); + if (ret) + return ret; + + phy_provider = devm_of_phy_provider_register(dev, bcm_usb_phy_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static struct platform_driver bcm_usb_phy_driver = { + .driver = { + .name = "phy-bcm-sr-usb", + .of_match_table = bcm_usb_phy_of_match, + }, + .probe = bcm_usb_phy_probe, +}; +module_platform_driver(bcm_usb_phy_driver); + +MODULE_AUTHOR("Broadcom"); +MODULE_DESCRIPTION("Broadcom stingray USB Phy driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c index d6ea5ce8afa5..0c4833da7be0 100644 --- a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c +++ b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c @@ -6,6 +6,7 @@ #include <linux/module.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> +#include <linux/regulator/consumer.h> #define PHY_CTRL0 0x0 #define PHY_CTRL0_REF_SSP_EN BIT(2) @@ -24,6 +25,7 @@ struct imx8mq_usb_phy { struct phy *phy; struct clk *clk; void __iomem *base; + struct regulator *vbus; }; static int imx8mq_usb_phy_init(struct phy *phy) @@ -55,6 +57,11 @@ static int imx8mq_usb_phy_init(struct phy *phy) static int imx8mq_phy_power_on(struct phy *phy) { struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy); + int ret; + + ret = regulator_enable(imx_phy->vbus); + if (ret) + return ret; return clk_prepare_enable(imx_phy->clk); } @@ -64,6 +71,7 @@ static int imx8mq_phy_power_off(struct phy *phy) struct imx8mq_usb_phy *imx_phy = phy_get_drvdata(phy); clk_disable_unprepare(imx_phy->clk); + regulator_disable(imx_phy->vbus); return 0; } @@ -101,6 +109,10 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev) if (IS_ERR(imx_phy->phy)) return PTR_ERR(imx_phy->phy); + imx_phy->vbus = devm_regulator_get(dev, "vbus"); + if (IS_ERR(imx_phy->vbus)) + return PTR_ERR(imx_phy->vbus); + phy_set_drvdata(imx_phy->phy, imx_phy); phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); diff --git a/drivers/phy/hisilicon/Kconfig b/drivers/phy/hisilicon/Kconfig index b40ee54a1a50..3c142f08987c 100644 --- a/drivers/phy/hisilicon/Kconfig +++ b/drivers/phy/hisilicon/Kconfig @@ -12,6 +12,16 @@ config PHY_HI6220_USB To compile this driver as a module, choose M here. +config PHY_HI3660_USB + tristate "hi3660 USB PHY support" + depends on (ARCH_HISI && ARM64) || COMPILE_TEST + select GENERIC_PHY + select MFD_SYSCON + help + Enable this to support the HISILICON HI3660 USB PHY. + + To compile this driver as a module, choose M here. + config PHY_HISTB_COMBPHY tristate "HiSilicon STB SoCs COMBPHY support" depends on (ARCH_HISI && ARM64) || COMPILE_TEST diff --git a/drivers/phy/hisilicon/Makefile b/drivers/phy/hisilicon/Makefile index f662a4fe18d8..75ba64e2faf8 100644 --- a/drivers/phy/hisilicon/Makefile +++ b/drivers/phy/hisilicon/Makefile @@ -1,4 +1,5 @@ obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o +obj-$(CONFIG_PHY_HI3660_USB) += phy-hi3660-usb3.o obj-$(CONFIG_PHY_HISTB_COMBPHY) += phy-histb-combphy.o obj-$(CONFIG_PHY_HISI_INNO_USB2) += phy-hisi-inno-usb2.o obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o diff --git a/drivers/phy/hisilicon/phy-hi3660-usb3.c b/drivers/phy/hisilicon/phy-hi3660-usb3.c new file mode 100644 index 000000000000..cc0af2c044d0 --- /dev/null +++ b/drivers/phy/hisilicon/phy-hi3660-usb3.c @@ -0,0 +1,233 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Phy provider for USB 3.0 controller on HiSilicon 3660 platform + * + * Copyright (C) 2017-2018 Hilisicon Electronics Co., Ltd. + * http://www.huawei.com + * + * Authors: Yu Chen <chenyu56@huawei.com> + */ + +#include <linux/kernel.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#define PERI_CRG_CLK_EN4 0x40 +#define PERI_CRG_CLK_DIS4 0x44 +#define GT_CLK_USB3OTG_REF BIT(0) +#define GT_ACLK_USB3OTG BIT(1) + +#define PERI_CRG_RSTEN4 0x90 +#define PERI_CRG_RSTDIS4 0x94 +#define IP_RST_USB3OTGPHY_POR BIT(3) +#define IP_RST_USB3OTG BIT(5) + +#define PERI_CRG_ISODIS 0x148 +#define USB_REFCLK_ISO_EN BIT(25) + +#define PCTRL_PERI_CTRL3 0x10 +#define PCTRL_PERI_CTRL3_MSK_START 16 +#define USB_TCXO_EN BIT(1) + +#define PCTRL_PERI_CTRL24 0x64 +#define SC_CLK_USB3PHY_3MUX1_SEL BIT(25) + +#define USBOTG3_CTRL0 0x00 +#define SC_USB3PHY_ABB_GT_EN BIT(15) + +#define USBOTG3_CTRL2 0x08 +#define USBOTG3CTRL2_POWERDOWN_HSP BIT(0) +#define USBOTG3CTRL2_POWERDOWN_SSP BIT(1) + +#define USBOTG3_CTRL3 0x0C +#define USBOTG3_CTRL3_VBUSVLDEXT BIT(6) +#define USBOTG3_CTRL3_VBUSVLDEXTSEL BIT(5) + +#define USBOTG3_CTRL4 0x10 + +#define USBOTG3_CTRL7 0x1c +#define REF_SSP_EN BIT(16) + +/* This value config the default txtune parameter of the usb 2.0 phy */ +#define HI3660_USB_DEFAULT_PHY_PARAM 0x1c466e3 + +struct hi3660_priv { + struct device *dev; + struct regmap *peri_crg; + struct regmap *pctrl; + struct regmap *otg_bc; + u32 eye_diagram_param; +}; + +static int hi3660_phy_init(struct phy *phy) +{ + struct hi3660_priv *priv = phy_get_drvdata(phy); + u32 val, mask; + int ret; + + /* usb refclk iso disable */ + ret = regmap_write(priv->peri_crg, PERI_CRG_ISODIS, USB_REFCLK_ISO_EN); + if (ret) + goto out; + + /* enable usb_tcxo_en */ + val = USB_TCXO_EN | (USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START); + ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, val); + if (ret) + goto out; + + /* assert phy */ + val = IP_RST_USB3OTGPHY_POR | IP_RST_USB3OTG; + ret = regmap_write(priv->peri_crg, PERI_CRG_RSTEN4, val); + if (ret) + goto out; + + /* enable phy ref clk */ + val = SC_USB3PHY_ABB_GT_EN; + mask = val; + ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL0, mask, val); + if (ret) + goto out; + + val = REF_SSP_EN; + mask = val; + ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL7, mask, val); + if (ret) + goto out; + + /* exit from IDDQ mode */ + mask = USBOTG3CTRL2_POWERDOWN_HSP | USBOTG3CTRL2_POWERDOWN_SSP; + ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL2, mask, 0); + if (ret) + goto out; + + /* delay for exit from IDDQ mode */ + usleep_range(100, 120); + + /* deassert phy */ + val = IP_RST_USB3OTGPHY_POR | IP_RST_USB3OTG; + ret = regmap_write(priv->peri_crg, PERI_CRG_RSTDIS4, val); + if (ret) + goto out; + + /* delay for phy deasserted */ + usleep_range(10000, 15000); + + /* fake vbus valid signal */ + val = USBOTG3_CTRL3_VBUSVLDEXT | USBOTG3_CTRL3_VBUSVLDEXTSEL; + mask = val; + ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL3, mask, val); + if (ret) + goto out; + + /* delay for vbus valid */ + usleep_range(100, 120); + + ret = regmap_write(priv->otg_bc, USBOTG3_CTRL4, + priv->eye_diagram_param); + if (ret) + goto out; + + return 0; +out: + dev_err(priv->dev, "failed to init phy ret: %d\n", ret); + return ret; +} + +static int hi3660_phy_exit(struct phy *phy) +{ + struct hi3660_priv *priv = phy_get_drvdata(phy); + u32 val; + int ret; + + /* assert phy */ + val = IP_RST_USB3OTGPHY_POR; + ret = regmap_write(priv->peri_crg, PERI_CRG_RSTEN4, val); + if (ret) + goto out; + + /* disable usb_tcxo_en */ + val = USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START; + ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, val); + if (ret) + goto out; + + return 0; +out: + dev_err(priv->dev, "failed to exit phy ret: %d\n", ret); + return ret; +} + +static struct phy_ops hi3660_phy_ops = { + .init = hi3660_phy_init, + .exit = hi3660_phy_exit, + .owner = THIS_MODULE, +}; + +static int hi3660_phy_probe(struct platform_device *pdev) +{ + struct phy_provider *phy_provider; + struct device *dev = &pdev->dev; + struct phy *phy; + struct hi3660_priv *priv; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = dev; + priv->peri_crg = syscon_regmap_lookup_by_phandle(dev->of_node, + "hisilicon,pericrg-syscon"); + if (IS_ERR(priv->peri_crg)) { + dev_err(dev, "no hisilicon,pericrg-syscon\n"); + return PTR_ERR(priv->peri_crg); + } + + priv->pctrl = syscon_regmap_lookup_by_phandle(dev->of_node, + "hisilicon,pctrl-syscon"); + if (IS_ERR(priv->pctrl)) { + dev_err(dev, "no hisilicon,pctrl-syscon\n"); + return PTR_ERR(priv->pctrl); + } + + /* node of hi3660 phy is a sub-node of usb3_otg_bc */ + priv->otg_bc = syscon_node_to_regmap(dev->parent->of_node); + if (IS_ERR(priv->otg_bc)) { + dev_err(dev, "no hisilicon,usb3-otg-bc-syscon\n"); + return PTR_ERR(priv->otg_bc); + } + + if (of_property_read_u32(dev->of_node, "hisilicon,eye-diagram-param", + &(priv->eye_diagram_param))) + priv->eye_diagram_param = HI3660_USB_DEFAULT_PHY_PARAM; + + phy = devm_phy_create(dev, NULL, &hi3660_phy_ops); + if (IS_ERR(phy)) + return PTR_ERR(phy); + + phy_set_drvdata(phy, priv); + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id hi3660_phy_of_match[] = { + {.compatible = "hisilicon,hi3660-usb-phy",}, + { } +}; +MODULE_DEVICE_TABLE(of, hi3660_phy_of_match); + +static struct platform_driver hi3660_phy_driver = { + .probe = hi3660_phy_probe, + .driver = { + .name = "hi3660-usb-phy", + .of_match_table = hi3660_phy_of_match, + } +}; +module_platform_driver(hi3660_phy_driver); + +MODULE_AUTHOR("Yu Chen <chenyu56@huawei.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Hilisicon Hi3660 USB3 PHY Driver"); diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig index 8857d00b3c65..b5a89dbd3fe7 100644 --- a/drivers/phy/mediatek/Kconfig +++ b/drivers/phy/mediatek/Kconfig @@ -13,6 +13,16 @@ config PHY_MTK_TPHY multi-ports is first version, otherwise is second veriosn, so you can easily distinguish them by banks layout. +config PHY_MTK_UFS + tristate "MediaTek UFS M-PHY driver" + depends on ARCH_MEDIATEK && OF + select GENERIC_PHY + help + Support for UFS M-PHY on MediaTek chipsets. + Enable this to provide vendor-specific probing, + initialization, power on and power off flow of + specified M-PHYs. + config PHY_MTK_XSPHY tristate "MediaTek XS-PHY Driver" depends on ARCH_MEDIATEK && OF diff --git a/drivers/phy/mediatek/Makefile b/drivers/phy/mediatek/Makefile index ee49edc97ee9..08a8e6a97b1e 100644 --- a/drivers/phy/mediatek/Makefile +++ b/drivers/phy/mediatek/Makefile @@ -4,4 +4,5 @@ # obj-$(CONFIG_PHY_MTK_TPHY) += phy-mtk-tphy.o +obj-$(CONFIG_PHY_MTK_UFS) += phy-mtk-ufs.o obj-$(CONFIG_PHY_MTK_XSPHY) += phy-mtk-xsphy.o diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c index 5b6a470ca145..cb2ed3b25068 100644 --- a/drivers/phy/mediatek/phy-mtk-tphy.c +++ b/drivers/phy/mediatek/phy-mtk-tphy.c @@ -1103,13 +1103,9 @@ static int mtk_tphy_probe(struct platform_device *pdev) } /* it's deprecated, make it optional for backward compatibility */ - tphy->u3phya_ref = devm_clk_get(dev, "u3phya_ref"); - if (IS_ERR(tphy->u3phya_ref)) { - if (PTR_ERR(tphy->u3phya_ref) == -EPROBE_DEFER) - return -EPROBE_DEFER; - - tphy->u3phya_ref = NULL; - } + tphy->u3phya_ref = devm_clk_get_optional(dev, "u3phya_ref"); + if (IS_ERR(tphy->u3phya_ref)) + return PTR_ERR(tphy->u3phya_ref); tphy->src_ref_clk = U3P_REF_CLK; tphy->src_coef = U3P_SLEW_RATE_COEF; diff --git a/drivers/phy/mediatek/phy-mtk-ufs.c b/drivers/phy/mediatek/phy-mtk-ufs.c new file mode 100644 index 000000000000..cf94f5c35dc5 --- /dev/null +++ b/drivers/phy/mediatek/phy-mtk-ufs.c @@ -0,0 +1,245 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 MediaTek Inc. + * Author: Stanley Chu <stanley.chu@mediatek.com> + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> + +/* mphy register and offsets */ +#define MP_GLB_DIG_8C 0x008C +#define FRC_PLL_ISO_EN BIT(8) +#define PLL_ISO_EN BIT(9) +#define FRC_FRC_PWR_ON BIT(10) +#define PLL_PWR_ON BIT(11) + +#define MP_LN_DIG_RX_9C 0xA09C +#define FSM_DIFZ_FRC BIT(18) + +#define MP_LN_DIG_RX_AC 0xA0AC +#define FRC_RX_SQ_EN BIT(0) +#define RX_SQ_EN BIT(1) + +#define MP_LN_RX_44 0xB044 +#define FRC_CDR_PWR_ON BIT(17) +#define CDR_PWR_ON BIT(18) +#define FRC_CDR_ISO_EN BIT(19) +#define CDR_ISO_EN BIT(20) + +struct ufs_mtk_phy { + struct device *dev; + void __iomem *mmio; + struct clk *mp_clk; + struct clk *unipro_clk; +}; + +static inline u32 mphy_readl(struct ufs_mtk_phy *phy, u32 reg) +{ + return readl(phy->mmio + reg); +} + +static inline void mphy_writel(struct ufs_mtk_phy *phy, u32 val, u32 reg) +{ + writel(val, phy->mmio + reg); +} + +static void mphy_set_bit(struct ufs_mtk_phy *phy, u32 reg, u32 bit) +{ + u32 val; + + val = mphy_readl(phy, reg); + val |= bit; + mphy_writel(phy, val, reg); +} + +static void mphy_clr_bit(struct ufs_mtk_phy *phy, u32 reg, u32 bit) +{ + u32 val; + + val = mphy_readl(phy, reg); + val &= ~bit; + mphy_writel(phy, val, reg); +} + +static struct ufs_mtk_phy *get_ufs_mtk_phy(struct phy *generic_phy) +{ + return (struct ufs_mtk_phy *)phy_get_drvdata(generic_phy); +} + +static int ufs_mtk_phy_clk_init(struct ufs_mtk_phy *phy) +{ + struct device *dev = phy->dev; + + phy->unipro_clk = devm_clk_get(dev, "unipro"); + if (IS_ERR(phy->unipro_clk)) { + dev_err(dev, "failed to get clock: unipro"); + return PTR_ERR(phy->unipro_clk); + } + + phy->mp_clk = devm_clk_get(dev, "mp"); + if (IS_ERR(phy->mp_clk)) { + dev_err(dev, "failed to get clock: mp"); + return PTR_ERR(phy->mp_clk); + } + + return 0; +} + +static void ufs_mtk_phy_set_active(struct ufs_mtk_phy *phy) +{ + /* release DA_MP_PLL_PWR_ON */ + mphy_set_bit(phy, MP_GLB_DIG_8C, PLL_PWR_ON); + mphy_clr_bit(phy, MP_GLB_DIG_8C, FRC_FRC_PWR_ON); + + /* release DA_MP_PLL_ISO_EN */ + mphy_clr_bit(phy, MP_GLB_DIG_8C, PLL_ISO_EN); + mphy_clr_bit(phy, MP_GLB_DIG_8C, FRC_PLL_ISO_EN); + + /* release DA_MP_CDR_PWR_ON */ + mphy_set_bit(phy, MP_LN_RX_44, CDR_PWR_ON); + mphy_clr_bit(phy, MP_LN_RX_44, FRC_CDR_PWR_ON); + + /* release DA_MP_CDR_ISO_EN */ + mphy_clr_bit(phy, MP_LN_RX_44, CDR_ISO_EN); + mphy_clr_bit(phy, MP_LN_RX_44, FRC_CDR_ISO_EN); + + /* release DA_MP_RX0_SQ_EN */ + mphy_set_bit(phy, MP_LN_DIG_RX_AC, RX_SQ_EN); + mphy_clr_bit(phy, MP_LN_DIG_RX_AC, FRC_RX_SQ_EN); + + /* delay 1us to wait DIFZ stable */ + udelay(1); + + /* release DIFZ */ + mphy_clr_bit(phy, MP_LN_DIG_RX_9C, FSM_DIFZ_FRC); +} + +static void ufs_mtk_phy_set_deep_hibern(struct ufs_mtk_phy *phy) +{ + /* force DIFZ */ + mphy_set_bit(phy, MP_LN_DIG_RX_9C, FSM_DIFZ_FRC); + + /* force DA_MP_RX0_SQ_EN */ + mphy_set_bit(phy, MP_LN_DIG_RX_AC, FRC_RX_SQ_EN); + mphy_clr_bit(phy, MP_LN_DIG_RX_AC, RX_SQ_EN); + + /* force DA_MP_CDR_ISO_EN */ + mphy_set_bit(phy, MP_LN_RX_44, FRC_CDR_ISO_EN); + mphy_set_bit(phy, MP_LN_RX_44, CDR_ISO_EN); + + /* force DA_MP_CDR_PWR_ON */ + mphy_set_bit(phy, MP_LN_RX_44, FRC_CDR_PWR_ON); + mphy_clr_bit(phy, MP_LN_RX_44, CDR_PWR_ON); + + /* force DA_MP_PLL_ISO_EN */ + mphy_set_bit(phy, MP_GLB_DIG_8C, FRC_PLL_ISO_EN); + mphy_set_bit(phy, MP_GLB_DIG_8C, PLL_ISO_EN); + + /* force DA_MP_PLL_PWR_ON */ + mphy_set_bit(phy, MP_GLB_DIG_8C, FRC_FRC_PWR_ON); + mphy_clr_bit(phy, MP_GLB_DIG_8C, PLL_PWR_ON); +} + +static int ufs_mtk_phy_power_on(struct phy *generic_phy) +{ + struct ufs_mtk_phy *phy = get_ufs_mtk_phy(generic_phy); + int ret; + + ret = clk_prepare_enable(phy->unipro_clk); + if (ret) { + dev_err(phy->dev, "unipro_clk enable failed %d\n", ret); + goto out; + } + + ret = clk_prepare_enable(phy->mp_clk); + if (ret) { + dev_err(phy->dev, "mp_clk enable failed %d\n", ret); + goto out_unprepare_unipro_clk; + } + + ufs_mtk_phy_set_active(phy); + + return 0; + +out_unprepare_unipro_clk: + clk_disable_unprepare(phy->unipro_clk); +out: + return ret; +} + +static int ufs_mtk_phy_power_off(struct phy *generic_phy) +{ + struct ufs_mtk_phy *phy = get_ufs_mtk_phy(generic_phy); + + ufs_mtk_phy_set_deep_hibern(phy); + + clk_disable_unprepare(phy->unipro_clk); + clk_disable_unprepare(phy->mp_clk); + + return 0; +} + +static const struct phy_ops ufs_mtk_phy_ops = { + .power_on = ufs_mtk_phy_power_on, + .power_off = ufs_mtk_phy_power_off, + .owner = THIS_MODULE, +}; + +static int ufs_mtk_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct phy *generic_phy; + struct phy_provider *phy_provider; + struct resource *res; + struct ufs_mtk_phy *phy; + int ret; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + phy->mmio = devm_ioremap_resource(dev, res); + if (IS_ERR(phy->mmio)) + return PTR_ERR(phy->mmio); + + phy->dev = dev; + + ret = ufs_mtk_phy_clk_init(phy); + if (ret) + return ret; + + generic_phy = devm_phy_create(dev, NULL, &ufs_mtk_phy_ops); + if (IS_ERR(generic_phy)) + return PTR_ERR(generic_phy); + + phy_set_drvdata(generic_phy, phy); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static const struct of_device_id ufs_mtk_phy_of_match[] = { + {.compatible = "mediatek,mt8183-ufsphy"}, + {}, +}; +MODULE_DEVICE_TABLE(of, ufs_mtk_phy_of_match); + +static struct platform_driver ufs_mtk_phy_driver = { + .probe = ufs_mtk_phy_probe, + .driver = { + .of_match_table = ufs_mtk_phy_of_match, + .name = "ufs_mtk_phy", + }, +}; +module_platform_driver(ufs_mtk_phy_driver); + +MODULE_DESCRIPTION("Universal Flash Storage (UFS) MediaTek MPHY"); +MODULE_AUTHOR("Stanley Chu <stanley.chu@mediatek.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/mscc/phy-ocelot-serdes.c b/drivers/phy/mscc/phy-ocelot-serdes.c index 77c46f639fbf..76f596365176 100644 --- a/drivers/phy/mscc/phy-ocelot-serdes.c +++ b/drivers/phy/mscc/phy-ocelot-serdes.c @@ -31,6 +31,238 @@ struct serdes_macro { struct serdes_ctrl *ctrl; }; +#define MCB_S6G_CFG_TIMEOUT 50 + +static int __serdes_write_mcb_s6g(struct regmap *regmap, u8 macro, u32 op) +{ + unsigned int regval = 0; + + regmap_write(regmap, HSIO_MCB_S6G_ADDR_CFG, op | + HSIO_MCB_S6G_ADDR_CFG_SERDES6G_ADDR(BIT(macro))); + + return regmap_read_poll_timeout(regmap, HSIO_MCB_S6G_ADDR_CFG, regval, + (regval & op) != op, 100, + MCB_S6G_CFG_TIMEOUT * 1000); +} + +static int serdes_commit_mcb_s6g(struct regmap *regmap, u8 macro) +{ + return __serdes_write_mcb_s6g(regmap, macro, + HSIO_MCB_S6G_ADDR_CFG_SERDES6G_WR_ONE_SHOT); +} + +static int serdes_update_mcb_s6g(struct regmap *regmap, u8 macro) +{ + return __serdes_write_mcb_s6g(regmap, macro, + HSIO_MCB_S6G_ADDR_CFG_SERDES6G_RD_ONE_SHOT); +} + +static int serdes_init_s6g(struct regmap *regmap, u8 serdes, int mode) +{ + u32 pll_fsm_ctrl_data; + u32 ob_ena1v_mode; + u32 des_bw_ana; + u32 ob_ena_cas; + u32 if_mode; + u32 ob_lev; + u32 qrate; + int ret; + + if (mode == PHY_INTERFACE_MODE_QSGMII) { + pll_fsm_ctrl_data = 120; + ob_ena1v_mode = 0; + ob_ena_cas = 0; + des_bw_ana = 5; + ob_lev = 24; + if_mode = 3; + qrate = 0; + } else { + pll_fsm_ctrl_data = 60; + ob_ena1v_mode = 1; + ob_ena_cas = 2; + des_bw_ana = 3; + ob_lev = 48; + if_mode = 1; + qrate = 1; + } + + ret = serdes_update_mcb_s6g(regmap, serdes); + if (ret) + return ret; + + /* Test pattern */ + + regmap_update_bits(regmap, HSIO_S6G_COMMON_CFG, + HSIO_S6G_COMMON_CFG_SYS_RST, 0); + + regmap_update_bits(regmap, HSIO_S6G_PLL_CFG, + HSIO_S6G_PLL_CFG_PLL_FSM_ENA, 0); + + regmap_update_bits(regmap, HSIO_S6G_IB_CFG, + HSIO_S6G_IB_CFG_IB_SIG_DET_ENA | + HSIO_S6G_IB_CFG_IB_REG_ENA | + HSIO_S6G_IB_CFG_IB_SAM_ENA | + HSIO_S6G_IB_CFG_IB_EQZ_ENA | + HSIO_S6G_IB_CFG_IB_CONCUR | + HSIO_S6G_IB_CFG_IB_CAL_ENA, + HSIO_S6G_IB_CFG_IB_SIG_DET_ENA | + HSIO_S6G_IB_CFG_IB_REG_ENA | + HSIO_S6G_IB_CFG_IB_SAM_ENA | + HSIO_S6G_IB_CFG_IB_EQZ_ENA | + HSIO_S6G_IB_CFG_IB_CONCUR); + + regmap_update_bits(regmap, HSIO_S6G_IB_CFG1, + HSIO_S6G_IB_CFG1_IB_FRC_OFFSET | + HSIO_S6G_IB_CFG1_IB_FRC_LP | + HSIO_S6G_IB_CFG1_IB_FRC_MID | + HSIO_S6G_IB_CFG1_IB_FRC_HP | + HSIO_S6G_IB_CFG1_IB_FILT_OFFSET | + HSIO_S6G_IB_CFG1_IB_FILT_LP | + HSIO_S6G_IB_CFG1_IB_FILT_MID | + HSIO_S6G_IB_CFG1_IB_FILT_HP, + HSIO_S6G_IB_CFG1_IB_FILT_OFFSET | + HSIO_S6G_IB_CFG1_IB_FILT_HP | + HSIO_S6G_IB_CFG1_IB_FILT_LP | + HSIO_S6G_IB_CFG1_IB_FILT_MID); + + regmap_update_bits(regmap, HSIO_S6G_IB_CFG2, + HSIO_S6G_IB_CFG2_IB_UREG_M, + HSIO_S6G_IB_CFG2_IB_UREG(4)); + + regmap_update_bits(regmap, HSIO_S6G_IB_CFG3, + HSIO_S6G_IB_CFG3_IB_INI_OFFSET_M | + HSIO_S6G_IB_CFG3_IB_INI_LP_M | + HSIO_S6G_IB_CFG3_IB_INI_MID_M | + HSIO_S6G_IB_CFG3_IB_INI_HP_M, + HSIO_S6G_IB_CFG3_IB_INI_OFFSET(31) | + HSIO_S6G_IB_CFG3_IB_INI_LP(1) | + HSIO_S6G_IB_CFG3_IB_INI_MID(31) | + HSIO_S6G_IB_CFG3_IB_INI_HP(0)); + + regmap_update_bits(regmap, HSIO_S6G_MISC_CFG, + HSIO_S6G_MISC_CFG_LANE_RST, + HSIO_S6G_MISC_CFG_LANE_RST); + + ret = serdes_commit_mcb_s6g(regmap, serdes); + if (ret) + return ret; + + /* OB + DES + IB + SER CFG */ + regmap_update_bits(regmap, HSIO_S6G_OB_CFG, + HSIO_S6G_OB_CFG_OB_IDLE | + HSIO_S6G_OB_CFG_OB_ENA1V_MODE | + HSIO_S6G_OB_CFG_OB_POST0_M | + HSIO_S6G_OB_CFG_OB_PREC_M, + (ob_ena1v_mode ? HSIO_S6G_OB_CFG_OB_ENA1V_MODE : 0) | + HSIO_S6G_OB_CFG_OB_POST0(0) | + HSIO_S6G_OB_CFG_OB_PREC(0)); + + regmap_update_bits(regmap, HSIO_S6G_OB_CFG1, + HSIO_S6G_OB_CFG1_OB_ENA_CAS_M | + HSIO_S6G_OB_CFG1_OB_LEV_M, + HSIO_S6G_OB_CFG1_OB_LEV(ob_lev) | + HSIO_S6G_OB_CFG1_OB_ENA_CAS(ob_ena_cas)); + + regmap_update_bits(regmap, HSIO_S6G_DES_CFG, + HSIO_S6G_DES_CFG_DES_PHS_CTRL_M | + HSIO_S6G_DES_CFG_DES_CPMD_SEL_M | + HSIO_S6G_DES_CFG_DES_BW_ANA_M, + HSIO_S6G_DES_CFG_DES_PHS_CTRL(2) | + HSIO_S6G_DES_CFG_DES_CPMD_SEL(0) | + HSIO_S6G_DES_CFG_DES_BW_ANA(des_bw_ana)); + + regmap_update_bits(regmap, HSIO_S6G_IB_CFG, + HSIO_S6G_IB_CFG_IB_SIG_DET_CLK_SEL_M | + HSIO_S6G_IB_CFG_IB_REG_PAT_SEL_OFFSET_M, + HSIO_S6G_IB_CFG_IB_REG_PAT_SEL_OFFSET(0) | + HSIO_S6G_IB_CFG_IB_SIG_DET_CLK_SEL(0)); + + regmap_update_bits(regmap, HSIO_S6G_IB_CFG1, + HSIO_S6G_IB_CFG1_IB_TSDET_M, + HSIO_S6G_IB_CFG1_IB_TSDET(16)); + + regmap_update_bits(regmap, HSIO_S6G_SER_CFG, + HSIO_S6G_SER_CFG_SER_ALISEL_M | + HSIO_S6G_SER_CFG_SER_ENALI, + HSIO_S6G_SER_CFG_SER_ALISEL(0)); + + regmap_update_bits(regmap, HSIO_S6G_PLL_CFG, + HSIO_S6G_PLL_CFG_PLL_DIV4 | + HSIO_S6G_PLL_CFG_PLL_ENA_ROT | + HSIO_S6G_PLL_CFG_PLL_FSM_CTRL_DATA_M | + HSIO_S6G_PLL_CFG_PLL_ROT_DIR | + HSIO_S6G_PLL_CFG_PLL_ROT_FRQ, + HSIO_S6G_PLL_CFG_PLL_FSM_CTRL_DATA + (pll_fsm_ctrl_data)); + + regmap_update_bits(regmap, HSIO_S6G_COMMON_CFG, + HSIO_S6G_COMMON_CFG_SYS_RST | + HSIO_S6G_COMMON_CFG_ENA_LANE | + HSIO_S6G_COMMON_CFG_PWD_RX | + HSIO_S6G_COMMON_CFG_PWD_TX | + HSIO_S6G_COMMON_CFG_HRATE | + HSIO_S6G_COMMON_CFG_QRATE | + HSIO_S6G_COMMON_CFG_ENA_ELOOP | + HSIO_S6G_COMMON_CFG_ENA_FLOOP | + HSIO_S6G_COMMON_CFG_IF_MODE_M, + HSIO_S6G_COMMON_CFG_SYS_RST | + HSIO_S6G_COMMON_CFG_ENA_LANE | + (qrate ? HSIO_S6G_COMMON_CFG_QRATE : 0) | + HSIO_S6G_COMMON_CFG_IF_MODE(if_mode)); + + regmap_update_bits(regmap, HSIO_S6G_MISC_CFG, + HSIO_S6G_MISC_CFG_LANE_RST | + HSIO_S6G_MISC_CFG_DES_100FX_CPMD_ENA | + HSIO_S6G_MISC_CFG_RX_LPI_MODE_ENA | + HSIO_S6G_MISC_CFG_TX_LPI_MODE_ENA, + HSIO_S6G_MISC_CFG_LANE_RST | + HSIO_S6G_MISC_CFG_RX_LPI_MODE_ENA); + + + ret = serdes_commit_mcb_s6g(regmap, serdes); + if (ret) + return ret; + + regmap_update_bits(regmap, HSIO_S6G_PLL_CFG, + HSIO_S6G_PLL_CFG_PLL_FSM_ENA, + HSIO_S6G_PLL_CFG_PLL_FSM_ENA); + + ret = serdes_commit_mcb_s6g(regmap, serdes); + if (ret) + return ret; + + /* Wait for PLL bringup */ + msleep(20); + + regmap_update_bits(regmap, HSIO_S6G_IB_CFG, + HSIO_S6G_IB_CFG_IB_CAL_ENA, + HSIO_S6G_IB_CFG_IB_CAL_ENA); + + regmap_update_bits(regmap, HSIO_S6G_MISC_CFG, + HSIO_S6G_MISC_CFG_LANE_RST, 0); + + ret = serdes_commit_mcb_s6g(regmap, serdes); + if (ret) + return ret; + + /* Wait for calibration */ + msleep(60); + + regmap_update_bits(regmap, HSIO_S6G_IB_CFG, + HSIO_S6G_IB_CFG_IB_REG_PAT_SEL_OFFSET_M | + HSIO_S6G_IB_CFG_IB_SIG_DET_CLK_SEL_M, + HSIO_S6G_IB_CFG_IB_REG_PAT_SEL_OFFSET(0) | + HSIO_S6G_IB_CFG_IB_SIG_DET_CLK_SEL(7)); + + regmap_update_bits(regmap, HSIO_S6G_IB_CFG1, + HSIO_S6G_IB_CFG1_IB_TSDET_M, + HSIO_S6G_IB_CFG1_IB_TSDET(3)); + + /* IB CFG */ + + return 0; +} + #define MCB_S1G_CFG_TIMEOUT 50 static int __serdes_write_mcb_s1g(struct regmap *regmap, u8 macro, u32 op) @@ -110,7 +342,7 @@ struct serdes_mux { u32 mux; }; -#define SERDES_MUX(_idx, _port, _mode, _submode, _mask, _mux) { \ +#define SERDES_MUX(_idx, _port, _mode, _submode, _mask, _mux) { \ .idx = _idx, \ .port = _port, \ .mode = _mode, \ @@ -191,8 +423,12 @@ static int serdes_set_mode(struct phy *phy, enum phy_mode mode, int submode) if (macro->idx <= SERDES1G_MAX) return serdes_init_s1g(macro->ctrl->regs, macro->idx); + else if (macro->idx <= SERDES6G_MAX) + return serdes_init_s6g(macro->ctrl->regs, + macro->idx - (SERDES1G_MAX + 1), + ocelot_serdes_muxes[i].submode); - /* SERDES6G and PCIe not supported yet */ + /* PCIe not supported yet */ return -EOPNOTSUPP; } diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c index cb38f6e8614c..c147ba843f0b 100644 --- a/drivers/phy/phy-core.c +++ b/drivers/phy/phy-core.c @@ -384,10 +384,16 @@ int phy_reset(struct phy *phy) if (!phy || !phy->ops->reset) return 0; + ret = phy_pm_runtime_get_sync(phy); + if (ret < 0 && ret != -ENOTSUPP) + return ret; + mutex_lock(&phy->mutex); ret = phy->ops->reset(phy); mutex_unlock(&phy->mutex); + phy_pm_runtime_put(phy); + return ret; } EXPORT_SYMBOL_GPL(phy_reset); @@ -564,6 +570,11 @@ void phy_put(struct phy *phy) if (!phy || IS_ERR(phy)) return; + mutex_lock(&phy->mutex); + if (phy->ops->release) + phy->ops->release(phy); + mutex_unlock(&phy->mutex); + module_put(phy->ops->owner); put_device(&phy->dev); } diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index 08d6f6f7f039..cd91b4179b10 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -242,6 +242,88 @@ static const struct qmp_phy_init_tbl msm8996_pcie_pcs_tbl[] = { QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0x0e), }; +static const struct qmp_phy_init_tbl msm8998_pcie_serdes_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER1, 0xff), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_TIMER2, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_EP_DIV, 0x19), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_ENABLE1, 0x90), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x03), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0x55), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0x55), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0d), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x34), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x33), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_BUF_ENABLE, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x09), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x40), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x7e), + QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x15), +}; + +static const struct qmp_phy_init_tbl msm8998_pcie_tx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10), + QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06), +}; + +static const struct qmp_phy_init_tbl msm8998_pcie_rx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x1c), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1a), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN_HALF, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x71), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x40), +}; + +static const struct qmp_phy_init_tbl msm8998_pcie_pcs_tbl[] = { + QMP_PHY_INIT_CFG(QPHY_V3_PCS_ENDPOINT_REFCLK_DRIVE, 0x04), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_OSC_DTCT_ACTIONS, 0x00), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x01), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x20), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x00), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK, 0x01), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME, 0x73), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x99), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_SIGDET_CNTRL, 0x03), +}; + static const struct qmp_phy_init_tbl msm8996_usb3_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14), QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08), @@ -897,6 +979,7 @@ struct qmp_phy { * @init_count: phy common block initialization count * @phy_initialized: indicate if PHY has been initialized * @mode: current PHY mode + * @ufs_reset: optional UFS PHY reset handle */ struct qcom_qmp { struct device *dev; @@ -914,6 +997,8 @@ struct qcom_qmp { int init_count; bool phy_initialized; enum phy_mode mode; + + struct reset_control *ufs_reset; }; static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val) @@ -1146,6 +1231,31 @@ static const struct qmp_phy_cfg sdm845_ufsphy_cfg = { .no_pcs_sw_reset = true, }; +static const struct qmp_phy_cfg msm8998_pciephy_cfg = { + .type = PHY_TYPE_PCIE, + .nlanes = 1, + + .serdes_tbl = msm8998_pcie_serdes_tbl, + .serdes_tbl_num = ARRAY_SIZE(msm8998_pcie_serdes_tbl), + .tx_tbl = msm8998_pcie_tx_tbl, + .tx_tbl_num = ARRAY_SIZE(msm8998_pcie_tx_tbl), + .rx_tbl = msm8998_pcie_rx_tbl, + .rx_tbl_num = ARRAY_SIZE(msm8998_pcie_rx_tbl), + .pcs_tbl = msm8998_pcie_pcs_tbl, + .pcs_tbl_num = ARRAY_SIZE(msm8998_pcie_pcs_tbl), + .clk_list = msm8996_phy_clk_l, + .num_clks = ARRAY_SIZE(msm8996_phy_clk_l), + .reset_list = ipq8074_pciephy_reset_l, + .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l), + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), + .regs = pciephy_regs_layout, + + .start_ctrl = SERDES_START | PCS_START, + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, + .mask_com_pcs_ready = PCS_READY, +}; + static const struct qmp_phy_cfg msm8998_usb3phy_cfg = { .type = PHY_TYPE_USB3, .nlanes = 1, @@ -1314,6 +1424,7 @@ static int qcom_qmp_phy_com_exit(struct qcom_qmp *qmp) return 0; } + reset_control_assert(qmp->ufs_reset); if (cfg->has_phy_com_ctrl) { qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL], SERDES_START | PCS_START); @@ -1335,8 +1446,7 @@ static int qcom_qmp_phy_com_exit(struct qcom_qmp *qmp) return 0; } -/* PHY Initialization */ -static int qcom_qmp_phy_init(struct phy *phy) +static int qcom_qmp_phy_enable(struct phy *phy) { struct qmp_phy *qphy = phy_get_drvdata(phy); struct qcom_qmp *qmp = qphy->qmp; @@ -1351,6 +1461,33 @@ static int qcom_qmp_phy_init(struct phy *phy) dev_vdbg(qmp->dev, "Initializing QMP phy\n"); + if (cfg->no_pcs_sw_reset) { + /* + * Get UFS reset, which is delayed until now to avoid a + * circular dependency where UFS needs its PHY, but the PHY + * needs this UFS reset. + */ + if (!qmp->ufs_reset) { + qmp->ufs_reset = + devm_reset_control_get_exclusive(qmp->dev, + "ufsphy"); + + if (IS_ERR(qmp->ufs_reset)) { + ret = PTR_ERR(qmp->ufs_reset); + dev_err(qmp->dev, + "failed to get UFS reset: %d\n", + ret); + + qmp->ufs_reset = NULL; + return ret; + } + } + + ret = reset_control_assert(qmp->ufs_reset); + if (ret) + goto err_lane_rst; + } + ret = qcom_qmp_phy_com_init(qphy); if (ret) return ret; @@ -1383,14 +1520,9 @@ static int qcom_qmp_phy_init(struct phy *phy) cfg->rx_tbl, cfg->rx_tbl_num); qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num); - - /* - * UFS PHY requires the deassert of software reset before serdes start. - * For UFS PHYs that do not have software reset control bits, defer - * starting serdes until the power on callback. - */ - if ((cfg->type == PHY_TYPE_UFS) && cfg->no_pcs_sw_reset) - goto out; + ret = reset_control_deassert(qmp->ufs_reset); + if (ret) + goto err_lane_rst; /* * Pull out PHY from POWER DOWN state. @@ -1403,7 +1535,9 @@ static int qcom_qmp_phy_init(struct phy *phy) usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max); /* Pull PHY out of reset state */ - qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); + if (!cfg->no_pcs_sw_reset) + qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); + if (cfg->has_phy_dp_com_ctrl) qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET); @@ -1420,11 +1554,10 @@ static int qcom_qmp_phy_init(struct phy *phy) goto err_pcs_ready; } qmp->phy_initialized = true; - -out: - return ret; + return 0; err_pcs_ready: + reset_control_assert(qmp->ufs_reset); clk_disable_unprepare(qphy->pipe_clk); err_clk_enable: if (cfg->has_lane_rst) @@ -1435,7 +1568,7 @@ err_lane_rst: return ret; } -static int qcom_qmp_phy_exit(struct phy *phy) +static int qcom_qmp_phy_disable(struct phy *phy) { struct qmp_phy *qphy = phy_get_drvdata(phy); struct qcom_qmp *qmp = qphy->qmp; @@ -1463,44 +1596,6 @@ static int qcom_qmp_phy_exit(struct phy *phy) return 0; } -static int qcom_qmp_phy_poweron(struct phy *phy) -{ - struct qmp_phy *qphy = phy_get_drvdata(phy); - struct qcom_qmp *qmp = qphy->qmp; - const struct qmp_phy_cfg *cfg = qmp->cfg; - void __iomem *pcs = qphy->pcs; - void __iomem *status; - unsigned int mask, val; - int ret = 0; - - if (cfg->type != PHY_TYPE_UFS) - return 0; - - /* - * For UFS PHY that has not software reset control, serdes start - * should only happen when UFS driver explicitly calls phy_power_on - * after it deasserts software reset. - */ - if (cfg->no_pcs_sw_reset && !qmp->phy_initialized && - (qmp->init_count != 0)) { - /* start SerDes and Phy-Coding-Sublayer */ - qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl); - - status = pcs + cfg->regs[QPHY_PCS_READY_STATUS]; - mask = cfg->mask_pcs_ready; - - ret = readl_poll_timeout(status, val, !(val & mask), 1, - PHY_INIT_COMPLETE_TIMEOUT); - if (ret) { - dev_err(qmp->dev, "phy initialization timed-out\n"); - return ret; - } - qmp->phy_initialized = true; - } - - return ret; -} - static int qcom_qmp_phy_set_mode(struct phy *phy, enum phy_mode mode, int submode) { @@ -1750,9 +1845,15 @@ static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np) } static const struct phy_ops qcom_qmp_phy_gen_ops = { - .init = qcom_qmp_phy_init, - .exit = qcom_qmp_phy_exit, - .power_on = qcom_qmp_phy_poweron, + .init = qcom_qmp_phy_enable, + .exit = qcom_qmp_phy_disable, + .set_mode = qcom_qmp_phy_set_mode, + .owner = THIS_MODULE, +}; + +static const struct phy_ops qcom_qmp_ufs_ops = { + .power_on = qcom_qmp_phy_enable, + .power_off = qcom_qmp_phy_disable, .set_mode = qcom_qmp_phy_set_mode, .owner = THIS_MODULE, }; @@ -1763,6 +1864,7 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id) struct qcom_qmp *qmp = dev_get_drvdata(dev); struct phy *generic_phy; struct qmp_phy *qphy; + const struct phy_ops *ops = &qcom_qmp_phy_gen_ops; char prop_name[MAX_PROP_NAME]; int ret; @@ -1849,7 +1951,10 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id) } } - generic_phy = devm_phy_create(dev, np, &qcom_qmp_phy_gen_ops); + if (qmp->cfg->type == PHY_TYPE_UFS) + ops = &qcom_qmp_ufs_ops; + + generic_phy = devm_phy_create(dev, np, ops); if (IS_ERR(generic_phy)) { ret = PTR_ERR(generic_phy); dev_err(dev, "failed to create qphy %d\n", ret); @@ -1873,6 +1978,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = { .compatible = "qcom,msm8996-qmp-usb3-phy", .data = &msm8996_usb3phy_cfg, }, { + .compatible = "qcom,msm8998-qmp-pcie-phy", + .data = &msm8998_pciephy_cfg, + }, { .compatible = "qcom,msm8998-qmp-ufs-phy", .data = &sdm845_ufsphy_cfg, }, { diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h index a1b6cdee9a08..335ea5d7ef40 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h @@ -241,6 +241,7 @@ #define QSERDES_V3_RX_RX_BAND 0x110 #define QSERDES_V3_RX_RX_INTERFACE_MODE 0x11c #define QSERDES_V3_RX_RX_MODE_00 0x164 +#define QSERDES_V3_RX_RX_MODE_01 0x168 /* Only for QMP V3 PHY - PCS registers */ #define QPHY_V3_PCS_POWER_DOWN_CONTROL 0x004 @@ -280,6 +281,7 @@ #define QPHY_V3_PCS_TSYNC_RSYNC_TIME 0x08c #define QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK 0x0a0 #define QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK 0x0a4 +#define QPHY_V3_PCS_PLL_LOCK_CHK_DLY_TIME 0x0a8 #define QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK 0x0b0 #define QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME 0x0b8 #define QPHY_V3_PCS_RXEQTRAINING_RUN_TIME 0x0bc @@ -292,13 +294,23 @@ #define QPHY_V3_PCS_RX_MIN_HIBERN8_TIME 0x138 #define QPHY_V3_PCS_RX_SIGDET_CTRL1 0x13c #define QPHY_V3_PCS_RX_SIGDET_CTRL2 0x140 +#define QPHY_V3_PCS_LP_WAKEUP_DLY_TIME_AUXCLK_MSB 0x1a8 +#define QPHY_V3_PCS_OSC_DTCT_ACTIONS 0x1ac +#define QPHY_V3_PCS_SIGDET_CNTRL 0x1b0 #define QPHY_V3_PCS_TX_MID_TERM_CTRL1 0x1bc #define QPHY_V3_PCS_MULTI_LANE_CTRL1 0x1c4 #define QPHY_V3_PCS_RX_SIGDET_LVL 0x1d8 +#define QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB 0x1dc +#define QPHY_V3_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB 0x1e0 #define QPHY_V3_PCS_REFGEN_REQ_CONFIG1 0x20c #define QPHY_V3_PCS_REFGEN_REQ_CONFIG2 0x210 /* Only for QMP V3 PHY - PCS_MISC registers */ #define QPHY_V3_PCS_MISC_CLAMP_ENABLE 0x0c +#define QPHY_V3_PCS_MISC_OSC_DTCT_CONFIG2 0x2c +#define QPHY_V3_PCS_MISC_PCIE_INT_AUX_CLK_CONFIG1 0x44 +#define QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG2 0x54 +#define QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG4 0x5c +#define QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG5 0x60 #endif diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c index 8fd7ce139772..1cbf1d6f28ce 100644 --- a/drivers/phy/qualcomm/phy-qcom-qusb2.c +++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c @@ -822,14 +822,9 @@ static int qusb2_phy_probe(struct platform_device *pdev) return ret; } - qphy->iface_clk = devm_clk_get(dev, "iface"); - if (IS_ERR(qphy->iface_clk)) { - ret = PTR_ERR(qphy->iface_clk); - if (ret == -EPROBE_DEFER) - return ret; - qphy->iface_clk = NULL; - dev_dbg(dev, "failed to get iface clk, %d\n", ret); - } + qphy->iface_clk = devm_clk_get_optional(dev, "iface"); + if (IS_ERR(qphy->iface_clk)) + return PTR_ERR(qphy->iface_clk); qphy->phy_reset = devm_reset_control_get_by_index(&pdev->dev, 0); if (IS_ERR(qphy->phy_reset)) { diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-i.h b/drivers/phy/qualcomm/phy-qcom-ufs-i.h index f798fb64de94..109ddd67be82 100644 --- a/drivers/phy/qualcomm/phy-qcom-ufs-i.h +++ b/drivers/phy/qualcomm/phy-qcom-ufs-i.h @@ -19,6 +19,7 @@ #include <linux/clk.h> #include <linux/phy/phy.h> #include <linux/regulator/consumer.h> +#include <linux/reset.h> #include <linux/slab.h> #include <linux/platform_device.h> #include <linux/io.h> @@ -96,11 +97,10 @@ struct ufs_qcom_phy { char name[UFS_QCOM_PHY_NAME_LEN]; struct ufs_qcom_phy_calibration *cached_regs; int cached_regs_table_size; - bool is_powered_on; - bool is_started; struct ufs_qcom_phy_specific_ops *phy_spec_ops; enum phy_mode mode; + struct reset_control *ufs_reset; }; /** @@ -115,6 +115,7 @@ struct ufs_qcom_phy { * and writes to QSERDES_RX_SIGDET_CNTRL attribute */ struct ufs_qcom_phy_specific_ops { + int (*calibrate)(struct ufs_qcom_phy *ufs_qcom_phy, bool is_rate_B); void (*start_serdes)(struct ufs_qcom_phy *phy); int (*is_physical_coding_sublayer_ready)(struct ufs_qcom_phy *phy); void (*set_tx_lane_enable)(struct ufs_qcom_phy *phy, u32 val); diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c index 1e0d4f2046a4..4815546f228c 100644 --- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c +++ b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c @@ -42,28 +42,6 @@ void ufs_qcom_phy_qmp_14nm_advertise_quirks(struct ufs_qcom_phy *phy_common) UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE; } -static int ufs_qcom_phy_qmp_14nm_init(struct phy *generic_phy) -{ - struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy); - bool is_rate_B = false; - int ret; - - if (phy_common->mode == PHY_MODE_UFS_HS_B) - is_rate_B = true; - - ret = ufs_qcom_phy_qmp_14nm_phy_calibrate(phy_common, is_rate_B); - if (!ret) - /* phy calibrated, but yet to be started */ - phy_common->is_started = false; - - return ret; -} - -static int ufs_qcom_phy_qmp_14nm_exit(struct phy *generic_phy) -{ - return 0; -} - static int ufs_qcom_phy_qmp_14nm_set_mode(struct phy *generic_phy, enum phy_mode mode, int submode) @@ -124,8 +102,6 @@ static int ufs_qcom_phy_qmp_14nm_is_pcs_ready(struct ufs_qcom_phy *phy_common) } static const struct phy_ops ufs_qcom_phy_qmp_14nm_phy_ops = { - .init = ufs_qcom_phy_qmp_14nm_init, - .exit = ufs_qcom_phy_qmp_14nm_exit, .power_on = ufs_qcom_phy_power_on, .power_off = ufs_qcom_phy_power_off, .set_mode = ufs_qcom_phy_qmp_14nm_set_mode, @@ -133,6 +109,7 @@ static const struct phy_ops ufs_qcom_phy_qmp_14nm_phy_ops = { }; static struct ufs_qcom_phy_specific_ops phy_14nm_ops = { + .calibrate = ufs_qcom_phy_qmp_14nm_phy_calibrate, .start_serdes = ufs_qcom_phy_qmp_14nm_start_serdes, .is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_14nm_is_pcs_ready, .set_tx_lane_enable = ufs_qcom_phy_qmp_14nm_set_tx_lane_enable, diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c index aef40f7a41d4..f1cf819e12ea 100644 --- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c +++ b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c @@ -61,28 +61,6 @@ void ufs_qcom_phy_qmp_20nm_advertise_quirks(struct ufs_qcom_phy *phy_common) UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE; } -static int ufs_qcom_phy_qmp_20nm_init(struct phy *generic_phy) -{ - struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy); - bool is_rate_B = false; - int ret; - - if (phy_common->mode == PHY_MODE_UFS_HS_B) - is_rate_B = true; - - ret = ufs_qcom_phy_qmp_20nm_phy_calibrate(phy_common, is_rate_B); - if (!ret) - /* phy calibrated, but yet to be started */ - phy_common->is_started = false; - - return ret; -} - -static int ufs_qcom_phy_qmp_20nm_exit(struct phy *generic_phy) -{ - return 0; -} - static int ufs_qcom_phy_qmp_20nm_set_mode(struct phy *generic_phy, enum phy_mode mode, int submode) @@ -182,8 +160,6 @@ static int ufs_qcom_phy_qmp_20nm_is_pcs_ready(struct ufs_qcom_phy *phy_common) } static const struct phy_ops ufs_qcom_phy_qmp_20nm_phy_ops = { - .init = ufs_qcom_phy_qmp_20nm_init, - .exit = ufs_qcom_phy_qmp_20nm_exit, .power_on = ufs_qcom_phy_power_on, .power_off = ufs_qcom_phy_power_off, .set_mode = ufs_qcom_phy_qmp_20nm_set_mode, @@ -191,6 +167,7 @@ static const struct phy_ops ufs_qcom_phy_qmp_20nm_phy_ops = { }; static struct ufs_qcom_phy_specific_ops phy_20nm_ops = { + .calibrate = ufs_qcom_phy_qmp_20nm_phy_calibrate, .start_serdes = ufs_qcom_phy_qmp_20nm_start_serdes, .is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_20nm_is_pcs_ready, .set_tx_lane_enable = ufs_qcom_phy_qmp_20nm_set_tx_lane_enable, diff --git a/drivers/phy/qualcomm/phy-qcom-ufs.c b/drivers/phy/qualcomm/phy-qcom-ufs.c index f2979ccad00a..0a9f50f086b6 100644 --- a/drivers/phy/qualcomm/phy-qcom-ufs.c +++ b/drivers/phy/qualcomm/phy-qcom-ufs.c @@ -147,6 +147,21 @@ out: } EXPORT_SYMBOL_GPL(ufs_qcom_phy_generic_probe); +static int ufs_qcom_phy_get_reset(struct ufs_qcom_phy *phy_common) +{ + struct reset_control *reset; + + if (phy_common->ufs_reset) + return 0; + + reset = devm_reset_control_get_exclusive_by_index(phy_common->dev, 0); + if (IS_ERR(reset)) + return PTR_ERR(reset); + + phy_common->ufs_reset = reset; + return 0; +} + static int __ufs_qcom_phy_clk_get(struct device *dev, const char *name, struct clk **clk_out, bool err_print) { @@ -528,23 +543,38 @@ int ufs_qcom_phy_power_on(struct phy *generic_phy) { struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy); struct device *dev = phy_common->dev; + bool is_rate_B = false; int err; - if (phy_common->is_powered_on) - return 0; + err = ufs_qcom_phy_get_reset(phy_common); + if (err) + return err; - if (!phy_common->is_started) { - err = ufs_qcom_phy_start_serdes(phy_common); - if (err) - return err; + err = reset_control_assert(phy_common->ufs_reset); + if (err) + return err; - err = ufs_qcom_phy_is_pcs_ready(phy_common); - if (err) - return err; + if (phy_common->mode == PHY_MODE_UFS_HS_B) + is_rate_B = true; - phy_common->is_started = true; + err = phy_common->phy_spec_ops->calibrate(phy_common, is_rate_B); + if (err) + return err; + + err = reset_control_deassert(phy_common->ufs_reset); + if (err) { + dev_err(dev, "Failed to assert UFS PHY reset"); + return err; } + err = ufs_qcom_phy_start_serdes(phy_common); + if (err) + return err; + + err = ufs_qcom_phy_is_pcs_ready(phy_common); + if (err) + return err; + err = ufs_qcom_phy_enable_vreg(dev, &phy_common->vdda_phy); if (err) { dev_err(dev, "%s enable vdda_phy failed, err=%d\n", @@ -587,7 +617,6 @@ int ufs_qcom_phy_power_on(struct phy *generic_phy) } } - phy_common->is_powered_on = true; goto out; out_disable_ref_clk: @@ -607,9 +636,6 @@ int ufs_qcom_phy_power_off(struct phy *generic_phy) { struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy); - if (!phy_common->is_powered_on) - return 0; - phy_common->phy_spec_ops->power_control(phy_common, false); if (phy_common->vddp_ref_clk.reg) @@ -620,8 +646,7 @@ int ufs_qcom_phy_power_off(struct phy *generic_phy) ufs_qcom_phy_disable_vreg(phy_common->dev, &phy_common->vdda_pll); ufs_qcom_phy_disable_vreg(phy_common->dev, &phy_common->vdda_phy); - phy_common->is_powered_on = false; - + reset_control_assert(phy_common->ufs_reset); return 0; } EXPORT_SYMBOL_GPL(ufs_qcom_phy_power_off); diff --git a/drivers/phy/renesas/Kconfig b/drivers/phy/renesas/Kconfig index e340a925bbb1..111bdcae775c 100644 --- a/drivers/phy/renesas/Kconfig +++ b/drivers/phy/renesas/Kconfig @@ -19,7 +19,7 @@ config PHY_RCAR_GEN3_PCIE config PHY_RCAR_GEN3_USB2 tristate "Renesas R-Car generation 3 USB 2.0 PHY driver" depends on ARCH_RENESAS - depends on EXTCON + depends on EXTCON || !EXTCON # if EXTCON=m, this cannot be built-in depends on USB_SUPPORT select GENERIC_PHY select USB_COMMON diff --git a/drivers/phy/renesas/phy-rcar-gen2.c b/drivers/phy/renesas/phy-rcar-gen2.c index 72eeb066912d..8dc5710d9c98 100644 --- a/drivers/phy/renesas/phy-rcar-gen2.c +++ b/drivers/phy/renesas/phy-rcar-gen2.c @@ -4,6 +4,7 @@ * * Copyright (C) 2014 Renesas Solutions Corp. * Copyright (C) 2014 Cogent Embedded, Inc. + * Copyright (C) 2019 Renesas Electronics Corp. */ #include <linux/clk.h> @@ -15,6 +16,7 @@ #include <linux/platform_device.h> #include <linux/spinlock.h> #include <linux/atomic.h> +#include <linux/of_device.h> #define USBHS_LPSTS 0x02 #define USBHS_UGCTRL 0x80 @@ -35,6 +37,8 @@ #define USBHS_UGCTRL2_USB0SEL 0x00000030 #define USBHS_UGCTRL2_USB0SEL_PCI 0x00000010 #define USBHS_UGCTRL2_USB0SEL_HS_USB 0x00000030 +#define USBHS_UGCTRL2_USB0SEL_USB20 0x00000010 +#define USBHS_UGCTRL2_USB0SEL_HS_USB20 0x00000020 /* USB General status register (UGSTS) */ #define USBHS_UGSTS_LOCK 0x00000100 /* From technical update */ @@ -64,6 +68,11 @@ struct rcar_gen2_phy_driver { struct rcar_gen2_channel *channels; }; +struct rcar_gen2_phy_data { + const struct phy_ops *gen2_phy_ops; + const u32 (*select_value)[PHYS_PER_CHANNEL]; +}; + static int rcar_gen2_phy_init(struct phy *p) { struct rcar_gen2_phy *phy = phy_get_drvdata(p); @@ -180,6 +189,60 @@ static int rcar_gen2_phy_power_off(struct phy *p) return 0; } +static int rz_g1c_phy_power_on(struct phy *p) +{ + struct rcar_gen2_phy *phy = phy_get_drvdata(p); + struct rcar_gen2_phy_driver *drv = phy->channel->drv; + void __iomem *base = drv->base; + unsigned long flags; + u32 value; + + spin_lock_irqsave(&drv->lock, flags); + + /* Power on USBHS PHY */ + value = readl(base + USBHS_UGCTRL); + value &= ~USBHS_UGCTRL_PLLRESET; + writel(value, base + USBHS_UGCTRL); + + /* As per the data sheet wait 340 micro sec for power stable */ + udelay(340); + + if (phy->select_value == USBHS_UGCTRL2_USB0SEL_HS_USB20) { + value = readw(base + USBHS_LPSTS); + value |= USBHS_LPSTS_SUSPM; + writew(value, base + USBHS_LPSTS); + } + + spin_unlock_irqrestore(&drv->lock, flags); + + return 0; +} + +static int rz_g1c_phy_power_off(struct phy *p) +{ + struct rcar_gen2_phy *phy = phy_get_drvdata(p); + struct rcar_gen2_phy_driver *drv = phy->channel->drv; + void __iomem *base = drv->base; + unsigned long flags; + u32 value; + + spin_lock_irqsave(&drv->lock, flags); + /* Power off USBHS PHY */ + if (phy->select_value == USBHS_UGCTRL2_USB0SEL_HS_USB20) { + value = readw(base + USBHS_LPSTS); + value &= ~USBHS_LPSTS_SUSPM; + writew(value, base + USBHS_LPSTS); + } + + value = readl(base + USBHS_UGCTRL); + value |= USBHS_UGCTRL_PLLRESET; + writel(value, base + USBHS_UGCTRL); + + spin_unlock_irqrestore(&drv->lock, flags); + + return 0; +} + static const struct phy_ops rcar_gen2_phy_ops = { .init = rcar_gen2_phy_init, .exit = rcar_gen2_phy_exit, @@ -188,12 +251,55 @@ static const struct phy_ops rcar_gen2_phy_ops = { .owner = THIS_MODULE, }; +static const struct phy_ops rz_g1c_phy_ops = { + .init = rcar_gen2_phy_init, + .exit = rcar_gen2_phy_exit, + .power_on = rz_g1c_phy_power_on, + .power_off = rz_g1c_phy_power_off, + .owner = THIS_MODULE, +}; + +static const u32 pci_select_value[][PHYS_PER_CHANNEL] = { + [0] = { USBHS_UGCTRL2_USB0SEL_PCI, USBHS_UGCTRL2_USB0SEL_HS_USB }, + [2] = { USBHS_UGCTRL2_USB2SEL_PCI, USBHS_UGCTRL2_USB2SEL_USB30 }, +}; + +static const u32 usb20_select_value[][PHYS_PER_CHANNEL] = { + { USBHS_UGCTRL2_USB0SEL_USB20, USBHS_UGCTRL2_USB0SEL_HS_USB20 }, +}; + +static const struct rcar_gen2_phy_data rcar_gen2_usb_phy_data = { + .gen2_phy_ops = &rcar_gen2_phy_ops, + .select_value = pci_select_value, +}; + +static const struct rcar_gen2_phy_data rz_g1c_usb_phy_data = { + .gen2_phy_ops = &rz_g1c_phy_ops, + .select_value = usb20_select_value, +}; + static const struct of_device_id rcar_gen2_phy_match_table[] = { - { .compatible = "renesas,usb-phy-r8a7790" }, - { .compatible = "renesas,usb-phy-r8a7791" }, - { .compatible = "renesas,usb-phy-r8a7794" }, - { .compatible = "renesas,rcar-gen2-usb-phy" }, - { } + { + .compatible = "renesas,usb-phy-r8a77470", + .data = &rz_g1c_usb_phy_data, + }, + { + .compatible = "renesas,usb-phy-r8a7790", + .data = &rcar_gen2_usb_phy_data, + }, + { + .compatible = "renesas,usb-phy-r8a7791", + .data = &rcar_gen2_usb_phy_data, + }, + { + .compatible = "renesas,usb-phy-r8a7794", + .data = &rcar_gen2_usb_phy_data, + }, + { + .compatible = "renesas,rcar-gen2-usb-phy", + .data = &rcar_gen2_usb_phy_data, + }, + { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, rcar_gen2_phy_match_table); @@ -224,11 +330,6 @@ static const u32 select_mask[] = { [2] = USBHS_UGCTRL2_USB2SEL, }; -static const u32 select_value[][PHYS_PER_CHANNEL] = { - [0] = { USBHS_UGCTRL2_USB0SEL_PCI, USBHS_UGCTRL2_USB0SEL_HS_USB }, - [2] = { USBHS_UGCTRL2_USB2SEL_PCI, USBHS_UGCTRL2_USB2SEL_USB30 }, -}; - static int rcar_gen2_phy_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -238,6 +339,7 @@ static int rcar_gen2_phy_probe(struct platform_device *pdev) struct resource *res; void __iomem *base; struct clk *clk; + const struct rcar_gen2_phy_data *data; int i = 0; if (!dev->of_node) { @@ -266,6 +368,10 @@ static int rcar_gen2_phy_probe(struct platform_device *pdev) drv->clk = clk; drv->base = base; + data = of_device_get_match_data(dev); + if (!data) + return -EINVAL; + drv->num_channels = of_get_child_count(dev->of_node); drv->channels = devm_kcalloc(dev, drv->num_channels, sizeof(struct rcar_gen2_channel), @@ -294,10 +400,10 @@ static int rcar_gen2_phy_probe(struct platform_device *pdev) phy->channel = channel; phy->number = n; - phy->select_value = select_value[channel_num][n]; + phy->select_value = data->select_value[channel_num][n]; phy->phy = devm_phy_create(dev, NULL, - &rcar_gen2_phy_ops); + data->gen2_phy_ops); if (IS_ERR(phy->phy)) { dev_err(dev, "Failed to create PHY\n"); return PTR_ERR(phy->phy); diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index 0a34782aaaa2..1322185a00a2 100644 --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c @@ -37,11 +37,8 @@ /* INT_ENABLE */ #define USB2_INT_ENABLE_UCOM_INTEN BIT(3) -#define USB2_INT_ENABLE_USBH_INTB_EN BIT(2) -#define USB2_INT_ENABLE_USBH_INTA_EN BIT(1) -#define USB2_INT_ENABLE_INIT (USB2_INT_ENABLE_UCOM_INTEN | \ - USB2_INT_ENABLE_USBH_INTB_EN | \ - USB2_INT_ENABLE_USBH_INTA_EN) +#define USB2_INT_ENABLE_USBH_INTB_EN BIT(2) /* For EHCI */ +#define USB2_INT_ENABLE_USBH_INTA_EN BIT(1) /* For OHCI */ /* USBCTR */ #define USB2_USBCTR_DIRPD BIT(2) @@ -78,10 +75,35 @@ #define USB2_ADPCTRL_IDPULLUP BIT(5) /* 1 = ID sampling is enabled */ #define USB2_ADPCTRL_DRVVBUS BIT(4) +#define NUM_OF_PHYS 4 +enum rcar_gen3_phy_index { + PHY_INDEX_BOTH_HC, + PHY_INDEX_OHCI, + PHY_INDEX_EHCI, + PHY_INDEX_HSUSB +}; + +static const u32 rcar_gen3_int_enable[NUM_OF_PHYS] = { + USB2_INT_ENABLE_USBH_INTB_EN | USB2_INT_ENABLE_USBH_INTA_EN, + USB2_INT_ENABLE_USBH_INTA_EN, + USB2_INT_ENABLE_USBH_INTB_EN, + 0 +}; + +struct rcar_gen3_phy { + struct phy *phy; + struct rcar_gen3_chan *ch; + u32 int_enable_bits; + bool initialized; + bool otg_initialized; + bool powered; +}; + struct rcar_gen3_chan { void __iomem *base; + struct device *dev; /* platform_device's device */ struct extcon_dev *extcon; - struct phy *phy; + struct rcar_gen3_phy rphys[NUM_OF_PHYS]; struct regulator *vbus; struct work_struct work; enum usb_dr_mode dr_mode; @@ -120,7 +142,7 @@ static void rcar_gen3_set_host_mode(struct rcar_gen3_chan *ch, int host) void __iomem *usb2_base = ch->base; u32 val = readl(usb2_base + USB2_COMMCTRL); - dev_vdbg(&ch->phy->dev, "%s: %08x, %d\n", __func__, val, host); + dev_vdbg(ch->dev, "%s: %08x, %d\n", __func__, val, host); if (host) val &= ~USB2_COMMCTRL_OTG_PERI; else @@ -133,7 +155,7 @@ static void rcar_gen3_set_linectrl(struct rcar_gen3_chan *ch, int dp, int dm) void __iomem *usb2_base = ch->base; u32 val = readl(usb2_base + USB2_LINECTRL1); - dev_vdbg(&ch->phy->dev, "%s: %08x, %d, %d\n", __func__, val, dp, dm); + dev_vdbg(ch->dev, "%s: %08x, %d, %d\n", __func__, val, dp, dm); val &= ~(USB2_LINECTRL1_DP_RPD | USB2_LINECTRL1_DM_RPD); if (dp) val |= USB2_LINECTRL1_DP_RPD; @@ -147,7 +169,7 @@ static void rcar_gen3_enable_vbus_ctrl(struct rcar_gen3_chan *ch, int vbus) void __iomem *usb2_base = ch->base; u32 val = readl(usb2_base + USB2_ADPCTRL); - dev_vdbg(&ch->phy->dev, "%s: %08x, %d\n", __func__, val, vbus); + dev_vdbg(ch->dev, "%s: %08x, %d\n", __func__, val, vbus); if (vbus) val |= USB2_ADPCTRL_DRVVBUS; else @@ -249,6 +271,42 @@ static enum phy_mode rcar_gen3_get_phy_mode(struct rcar_gen3_chan *ch) return PHY_MODE_USB_DEVICE; } +static bool rcar_gen3_is_any_rphy_initialized(struct rcar_gen3_chan *ch) +{ + int i; + + for (i = 0; i < NUM_OF_PHYS; i++) { + if (ch->rphys[i].initialized) + return true; + } + + return false; +} + +static bool rcar_gen3_needs_init_otg(struct rcar_gen3_chan *ch) +{ + int i; + + for (i = 0; i < NUM_OF_PHYS; i++) { + if (ch->rphys[i].otg_initialized) + return false; + } + + return true; +} + +static bool rcar_gen3_are_all_rphys_power_off(struct rcar_gen3_chan *ch) +{ + int i; + + for (i = 0; i < NUM_OF_PHYS; i++) { + if (ch->rphys[i].powered) + return false; + } + + return true; +} + static ssize_t role_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { @@ -256,7 +314,7 @@ static ssize_t role_store(struct device *dev, struct device_attribute *attr, bool is_b_device; enum phy_mode cur_mode, new_mode; - if (!ch->is_otg_channel || !ch->phy->init_count) + if (!ch->is_otg_channel || !rcar_gen3_is_any_rphy_initialized(ch)) return -EIO; if (!strncmp(buf, "host", strlen("host"))) @@ -294,7 +352,7 @@ static ssize_t role_show(struct device *dev, struct device_attribute *attr, { struct rcar_gen3_chan *ch = dev_get_drvdata(dev); - if (!ch->is_otg_channel || !ch->phy->init_count) + if (!ch->is_otg_channel || !rcar_gen3_is_any_rphy_initialized(ch)) return -EIO; return sprintf(buf, "%s\n", rcar_gen3_is_host(ch) ? "host" : @@ -328,37 +386,62 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch) static int rcar_gen3_phy_usb2_init(struct phy *p) { - struct rcar_gen3_chan *channel = phy_get_drvdata(p); + struct rcar_gen3_phy *rphy = phy_get_drvdata(p); + struct rcar_gen3_chan *channel = rphy->ch; void __iomem *usb2_base = channel->base; + u32 val; /* Initialize USB2 part */ - writel(USB2_INT_ENABLE_INIT, usb2_base + USB2_INT_ENABLE); + val = readl(usb2_base + USB2_INT_ENABLE); + val |= USB2_INT_ENABLE_UCOM_INTEN | rphy->int_enable_bits; + writel(val, usb2_base + USB2_INT_ENABLE); writel(USB2_SPD_RSM_TIMSET_INIT, usb2_base + USB2_SPD_RSM_TIMSET); writel(USB2_OC_TIMSET_INIT, usb2_base + USB2_OC_TIMSET); /* Initialize otg part */ - if (channel->is_otg_channel) - rcar_gen3_init_otg(channel); + if (channel->is_otg_channel) { + if (rcar_gen3_needs_init_otg(channel)) + rcar_gen3_init_otg(channel); + rphy->otg_initialized = true; + } + + rphy->initialized = true; return 0; } static int rcar_gen3_phy_usb2_exit(struct phy *p) { - struct rcar_gen3_chan *channel = phy_get_drvdata(p); + struct rcar_gen3_phy *rphy = phy_get_drvdata(p); + struct rcar_gen3_chan *channel = rphy->ch; + void __iomem *usb2_base = channel->base; + u32 val; + + rphy->initialized = false; + + if (channel->is_otg_channel) + rphy->otg_initialized = false; - writel(0, channel->base + USB2_INT_ENABLE); + val = readl(usb2_base + USB2_INT_ENABLE); + val &= ~rphy->int_enable_bits; + if (!rcar_gen3_is_any_rphy_initialized(channel)) + val &= ~USB2_INT_ENABLE_UCOM_INTEN; + writel(val, usb2_base + USB2_INT_ENABLE); return 0; } static int rcar_gen3_phy_usb2_power_on(struct phy *p) { - struct rcar_gen3_chan *channel = phy_get_drvdata(p); + struct rcar_gen3_phy *rphy = phy_get_drvdata(p); + struct rcar_gen3_chan *channel = rphy->ch; void __iomem *usb2_base = channel->base; u32 val; int ret; + if (!rcar_gen3_are_all_rphys_power_off(channel)) + return 0; + if (channel->vbus) { ret = regulator_enable(channel->vbus); if (ret) @@ -371,14 +454,22 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p) val &= ~USB2_USBCTR_PLL_RST; writel(val, usb2_base + USB2_USBCTR); + rphy->powered = true; + return 0; } static int rcar_gen3_phy_usb2_power_off(struct phy *p) { - struct rcar_gen3_chan *channel = phy_get_drvdata(p); + struct rcar_gen3_phy *rphy = phy_get_drvdata(p); + struct rcar_gen3_chan *channel = rphy->ch; int ret = 0; + rphy->powered = false; + + if (!rcar_gen3_are_all_rphys_power_off(channel)) + return 0; + if (channel->vbus) ret = regulator_disable(channel->vbus); @@ -393,6 +484,12 @@ static const struct phy_ops rcar_gen3_phy_usb2_ops = { .owner = THIS_MODULE, }; +static const struct phy_ops rz_g1c_phy_usb2_ops = { + .init = rcar_gen3_phy_usb2_init, + .exit = rcar_gen3_phy_usb2_exit, + .owner = THIS_MODULE, +}; + static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch) { struct rcar_gen3_chan *ch = _ch; @@ -401,7 +498,7 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch) irqreturn_t ret = IRQ_NONE; if (status & USB2_OBINT_BITS) { - dev_vdbg(&ch->phy->dev, "%s: %08x\n", __func__, status); + dev_vdbg(ch->dev, "%s: %08x\n", __func__, status); writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA); rcar_gen3_device_recognition(ch); ret = IRQ_HANDLED; @@ -411,11 +508,27 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch) } static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = { - { .compatible = "renesas,usb2-phy-r8a7795" }, - { .compatible = "renesas,usb2-phy-r8a7796" }, - { .compatible = "renesas,usb2-phy-r8a77965" }, - { .compatible = "renesas,rcar-gen3-usb2-phy" }, - { } + { + .compatible = "renesas,usb2-phy-r8a77470", + .data = &rz_g1c_phy_usb2_ops, + }, + { + .compatible = "renesas,usb2-phy-r8a7795", + .data = &rcar_gen3_phy_usb2_ops, + }, + { + .compatible = "renesas,usb2-phy-r8a7796", + .data = &rcar_gen3_phy_usb2_ops, + }, + { + .compatible = "renesas,usb2-phy-r8a77965", + .data = &rcar_gen3_phy_usb2_ops, + }, + { + .compatible = "renesas,rcar-gen3-usb2-phy", + .data = &rcar_gen3_phy_usb2_ops, + }, + { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb2_match_table); @@ -425,13 +538,54 @@ static const unsigned int rcar_gen3_phy_cable[] = { EXTCON_NONE, }; +static struct phy *rcar_gen3_phy_usb2_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct rcar_gen3_chan *ch = dev_get_drvdata(dev); + + if (args->args_count == 0) /* For old version dts */ + return ch->rphys[PHY_INDEX_BOTH_HC].phy; + else if (args->args_count > 1) /* Prevent invalid args count */ + return ERR_PTR(-ENODEV); + + if (args->args[0] >= NUM_OF_PHYS) + return ERR_PTR(-ENODEV); + + return ch->rphys[args->args[0]].phy; +} + +static enum usb_dr_mode rcar_gen3_get_dr_mode(struct device_node *np) +{ + enum usb_dr_mode candidate = USB_DR_MODE_UNKNOWN; + int i; + + /* + * If one of device nodes has other dr_mode except UNKNOWN, + * this function returns UNKNOWN. To achieve backward compatibility, + * this loop starts the index as 0. + */ + for (i = 0; i < NUM_OF_PHYS; i++) { + enum usb_dr_mode mode = of_usb_get_dr_mode_by_phy(np, i); + + if (mode != USB_DR_MODE_UNKNOWN) { + if (candidate == USB_DR_MODE_UNKNOWN) + candidate = mode; + else if (candidate != mode) + return USB_DR_MODE_UNKNOWN; + } + } + + return candidate; +} + static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct rcar_gen3_chan *channel; struct phy_provider *provider; struct resource *res; - int irq, ret = 0; + const struct phy_ops *phy_usb2_ops; + int irq, ret = 0, i; if (!dev->of_node) { dev_err(dev, "This driver needs device tree\n"); @@ -457,7 +611,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev) dev_err(dev, "No irq handler (%d)\n", irq); } - channel->dr_mode = of_usb_get_dr_mode_by_phy(dev->of_node, 0); + channel->dr_mode = rcar_gen3_get_dr_mode(dev->of_node); if (channel->dr_mode != USB_DR_MODE_UNKNOWN) { int ret; @@ -481,11 +635,21 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev) * And then, phy-core will manage runtime pm for this device. */ pm_runtime_enable(dev); - channel->phy = devm_phy_create(dev, NULL, &rcar_gen3_phy_usb2_ops); - if (IS_ERR(channel->phy)) { - dev_err(dev, "Failed to create USB2 PHY\n"); - ret = PTR_ERR(channel->phy); - goto error; + phy_usb2_ops = of_device_get_match_data(dev); + if (!phy_usb2_ops) + return -EINVAL; + + for (i = 0; i < NUM_OF_PHYS; i++) { + channel->rphys[i].phy = devm_phy_create(dev, NULL, + phy_usb2_ops); + if (IS_ERR(channel->rphys[i].phy)) { + dev_err(dev, "Failed to create USB2 PHY\n"); + ret = PTR_ERR(channel->rphys[i].phy); + goto error; + } + channel->rphys[i].ch = channel; + channel->rphys[i].int_enable_bits = rcar_gen3_int_enable[i]; + phy_set_drvdata(channel->rphys[i].phy, &channel->rphys[i]); } channel->vbus = devm_regulator_get_optional(dev, "vbus"); @@ -498,9 +662,9 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, channel); - phy_set_drvdata(channel->phy, channel); + channel->dev = dev; - provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + provider = devm_of_phy_provider_register(dev, rcar_gen3_phy_usb2_xlate); if (IS_ERR(provider)) { dev_err(dev, "Failed to register PHY provider\n"); ret = PTR_ERR(provider); diff --git a/drivers/phy/rockchip/phy-rockchip-emmc.c b/drivers/phy/rockchip/phy-rockchip-emmc.c index 19bf84f0bc67..b804c6bf4b55 100644 --- a/drivers/phy/rockchip/phy-rockchip-emmc.c +++ b/drivers/phy/rockchip/phy-rockchip-emmc.c @@ -87,6 +87,7 @@ struct rockchip_emmc_phy { unsigned int reg_offset; struct regmap *reg_base; struct clk *emmcclk; + unsigned int drive_impedance; }; static int rockchip_emmc_phy_power(struct phy *phy, bool on_off) @@ -281,10 +282,10 @@ static int rockchip_emmc_phy_power_on(struct phy *phy) { struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy); - /* Drive impedance: 50 Ohm */ + /* Drive impedance: from DTS */ regmap_write(rk_phy->reg_base, rk_phy->reg_offset + GRF_EMMCPHY_CON6, - HIWORD_UPDATE(PHYCTRL_DR_50OHM, + HIWORD_UPDATE(rk_phy->drive_impedance, PHYCTRL_DR_MASK, PHYCTRL_DR_SHIFT)); @@ -314,6 +315,26 @@ static const struct phy_ops ops = { .owner = THIS_MODULE, }; +static u32 convert_drive_impedance_ohm(struct platform_device *pdev, u32 dr_ohm) +{ + switch (dr_ohm) { + case 100: + return PHYCTRL_DR_100OHM; + case 66: + return PHYCTRL_DR_66OHM; + case 50: + return PHYCTRL_DR_50OHM; + case 40: + return PHYCTRL_DR_40OHM; + case 33: + return PHYCTRL_DR_33OHM; + } + + dev_warn(&pdev->dev, "Invalid value %u for drive-impedance-ohm.\n", + dr_ohm); + return PHYCTRL_DR_50OHM; +} + static int rockchip_emmc_phy_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -322,6 +343,7 @@ static int rockchip_emmc_phy_probe(struct platform_device *pdev) struct phy_provider *phy_provider; struct regmap *grf; unsigned int reg_offset; + u32 val; if (!dev->parent || !dev->parent->of_node) return -ENODEV; @@ -344,6 +366,10 @@ static int rockchip_emmc_phy_probe(struct platform_device *pdev) rk_phy->reg_offset = reg_offset; rk_phy->reg_base = grf; + rk_phy->drive_impedance = PHYCTRL_DR_50OHM; + + if (!of_property_read_u32(dev->of_node, "drive-impedance-ohm", &val)) + rk_phy->drive_impedance = convert_drive_impedance_ohm(pdev, val); generic_phy = devm_phy_create(dev, dev->of_node, &ops); if (IS_ERR(generic_phy)) { diff --git a/drivers/phy/socionext/phy-uniphier-usb3hs.c b/drivers/phy/socionext/phy-uniphier-usb3hs.c index b1b048be6166..50f379fc4e06 100644 --- a/drivers/phy/socionext/phy-uniphier-usb3hs.c +++ b/drivers/phy/socionext/phy-uniphier-usb3hs.c @@ -335,13 +335,9 @@ static int uniphier_u3hsphy_probe(struct platform_device *pdev) if (IS_ERR(priv->clk_parent)) return PTR_ERR(priv->clk_parent); - priv->clk_ext = devm_clk_get(dev, "phy-ext"); - if (IS_ERR(priv->clk_ext)) { - if (PTR_ERR(priv->clk_ext) == -ENOENT) - priv->clk_ext = NULL; - else - return PTR_ERR(priv->clk_ext); - } + priv->clk_ext = devm_clk_get_optional(dev, "phy-ext"); + if (IS_ERR(priv->clk_ext)) + return PTR_ERR(priv->clk_ext); priv->rst = devm_reset_control_get_shared(dev, "phy"); if (IS_ERR(priv->rst)) diff --git a/drivers/phy/socionext/phy-uniphier-usb3ss.c b/drivers/phy/socionext/phy-uniphier-usb3ss.c index 4be95679c7d8..ec231e40ef2a 100644 --- a/drivers/phy/socionext/phy-uniphier-usb3ss.c +++ b/drivers/phy/socionext/phy-uniphier-usb3ss.c @@ -238,13 +238,9 @@ static int uniphier_u3ssphy_probe(struct platform_device *pdev) if (IS_ERR(priv->clk)) return PTR_ERR(priv->clk); - priv->clk_ext = devm_clk_get(dev, "phy-ext"); - if (IS_ERR(priv->clk_ext)) { - if (PTR_ERR(priv->clk_ext) == -ENOENT) - priv->clk_ext = NULL; - else - return PTR_ERR(priv->clk_ext); - } + priv->clk_ext = devm_clk_get_optional(dev, "phy-ext"); + if (IS_ERR(priv->clk_ext)) + return PTR_ERR(priv->clk_ext); priv->rst = devm_reset_control_get_shared(dev, "phy"); if (IS_ERR(priv->rst)) diff --git a/drivers/phy/tegra/Makefile b/drivers/phy/tegra/Makefile index 898589238fd9..a93cd9a499b2 100644 --- a/drivers/phy/tegra/Makefile +++ b/drivers/phy/tegra/Makefile @@ -4,3 +4,4 @@ phy-tegra-xusb-y += xusb.o phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_124_SOC) += xusb-tegra124.o phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_132_SOC) += xusb-tegra124.o phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_210_SOC) += xusb-tegra210.o +phy-tegra-xusb-$(CONFIG_ARCH_TEGRA_186_SOC) += xusb-tegra186.o diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c new file mode 100644 index 000000000000..6f3afaf9398f --- /dev/null +++ b/drivers/phy/tegra/xusb-tegra186.c @@ -0,0 +1,899 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2016-2019, NVIDIA CORPORATION. All rights reserved. + */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/phy/phy.h> +#include <linux/regulator/consumer.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/slab.h> + +#include <soc/tegra/fuse.h> + +#include "xusb.h" + +/* FUSE USB_CALIB registers */ +#define HS_CURR_LEVEL_PADX_SHIFT(x) ((x) ? (11 + (x - 1) * 6) : 0) +#define HS_CURR_LEVEL_PAD_MASK 0x3f +#define HS_TERM_RANGE_ADJ_SHIFT 7 +#define HS_TERM_RANGE_ADJ_MASK 0xf +#define HS_SQUELCH_SHIFT 29 +#define HS_SQUELCH_MASK 0x7 + +#define RPD_CTRL_SHIFT 0 +#define RPD_CTRL_MASK 0x1f + +/* XUSB PADCTL registers */ +#define XUSB_PADCTL_USB2_PAD_MUX 0x4 +#define USB2_PORT_SHIFT(x) ((x) * 2) +#define USB2_PORT_MASK 0x3 +#define PORT_XUSB 1 +#define HSIC_PORT_SHIFT(x) ((x) + 20) +#define HSIC_PORT_MASK 0x1 +#define PORT_HSIC 0 + +#define XUSB_PADCTL_USB2_PORT_CAP 0x8 +#define XUSB_PADCTL_SS_PORT_CAP 0xc +#define PORTX_CAP_SHIFT(x) ((x) * 4) +#define PORT_CAP_MASK 0x3 +#define PORT_CAP_DISABLED 0x0 +#define PORT_CAP_HOST 0x1 +#define PORT_CAP_DEVICE 0x2 +#define PORT_CAP_OTG 0x3 + +#define XUSB_PADCTL_ELPG_PROGRAM 0x20 +#define USB2_PORT_WAKE_INTERRUPT_ENABLE(x) BIT(x) +#define USB2_PORT_WAKEUP_EVENT(x) BIT((x) + 7) +#define SS_PORT_WAKE_INTERRUPT_ENABLE(x) BIT((x) + 14) +#define SS_PORT_WAKEUP_EVENT(x) BIT((x) + 21) +#define USB2_HSIC_PORT_WAKE_INTERRUPT_ENABLE(x) BIT((x) + 28) +#define USB2_HSIC_PORT_WAKEUP_EVENT(x) BIT((x) + 30) +#define ALL_WAKE_EVENTS \ + (USB2_PORT_WAKEUP_EVENT(0) | USB2_PORT_WAKEUP_EVENT(1) | \ + USB2_PORT_WAKEUP_EVENT(2) | SS_PORT_WAKEUP_EVENT(0) | \ + SS_PORT_WAKEUP_EVENT(1) | SS_PORT_WAKEUP_EVENT(2) | \ + USB2_HSIC_PORT_WAKEUP_EVENT(0)) + +#define XUSB_PADCTL_ELPG_PROGRAM_1 0x24 +#define SSPX_ELPG_CLAMP_EN(x) BIT(0 + (x) * 3) +#define SSPX_ELPG_CLAMP_EN_EARLY(x) BIT(1 + (x) * 3) +#define SSPX_ELPG_VCORE_DOWN(x) BIT(2 + (x) * 3) + +#define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x) (0x88 + (x) * 0x40) +#define HS_CURR_LEVEL(x) ((x) & 0x3f) +#define TERM_SEL BIT(25) +#define USB2_OTG_PD BIT(26) +#define USB2_OTG_PD2 BIT(27) +#define USB2_OTG_PD2_OVRD_EN BIT(28) +#define USB2_OTG_PD_ZI BIT(29) + +#define XUSB_PADCTL_USB2_OTG_PADX_CTL1(x) (0x8c + (x) * 0x40) +#define USB2_OTG_PD_DR BIT(2) +#define TERM_RANGE_ADJ(x) (((x) & 0xf) << 3) +#define RPD_CTRL(x) (((x) & 0x1f) << 26) + +#define XUSB_PADCTL_USB2_BIAS_PAD_CTL0 0x284 +#define BIAS_PAD_PD BIT(11) +#define HS_SQUELCH_LEVEL(x) (((x) & 0x7) << 0) + +#define XUSB_PADCTL_USB2_BIAS_PAD_CTL1 0x288 +#define USB2_TRK_START_TIMER(x) (((x) & 0x7f) << 12) +#define USB2_TRK_DONE_RESET_TIMER(x) (((x) & 0x7f) << 19) +#define USB2_PD_TRK BIT(26) + +#define XUSB_PADCTL_HSIC_PADX_CTL0(x) (0x300 + (x) * 0x20) +#define HSIC_PD_TX_DATA0 BIT(1) +#define HSIC_PD_TX_STROBE BIT(3) +#define HSIC_PD_RX_DATA0 BIT(4) +#define HSIC_PD_RX_STROBE BIT(6) +#define HSIC_PD_ZI_DATA0 BIT(7) +#define HSIC_PD_ZI_STROBE BIT(9) +#define HSIC_RPD_DATA0 BIT(13) +#define HSIC_RPD_STROBE BIT(15) +#define HSIC_RPU_DATA0 BIT(16) +#define HSIC_RPU_STROBE BIT(18) + +#define XUSB_PADCTL_HSIC_PAD_TRK_CTL0 0x340 +#define HSIC_TRK_START_TIMER(x) (((x) & 0x7f) << 5) +#define HSIC_TRK_DONE_RESET_TIMER(x) (((x) & 0x7f) << 12) +#define HSIC_PD_TRK BIT(19) + +#define USB2_VBUS_ID 0x360 +#define VBUS_OVERRIDE BIT(14) +#define ID_OVERRIDE(x) (((x) & 0xf) << 18) +#define ID_OVERRIDE_FLOATING ID_OVERRIDE(8) +#define ID_OVERRIDE_GROUNDED ID_OVERRIDE(0) + +#define TEGRA186_LANE(_name, _offset, _shift, _mask, _type) \ + { \ + .name = _name, \ + .offset = _offset, \ + .shift = _shift, \ + .mask = _mask, \ + .num_funcs = ARRAY_SIZE(tegra186_##_type##_functions), \ + .funcs = tegra186_##_type##_functions, \ + } + +struct tegra_xusb_fuse_calibration { + u32 *hs_curr_level; + u32 hs_squelch; + u32 hs_term_range_adj; + u32 rpd_ctrl; +}; + +struct tegra186_xusb_padctl { + struct tegra_xusb_padctl base; + + struct tegra_xusb_fuse_calibration calib; + + /* UTMI bias and tracking */ + struct clk *usb2_trk_clk; + unsigned int bias_pad_enable; +}; + +static inline struct tegra186_xusb_padctl * +to_tegra186_xusb_padctl(struct tegra_xusb_padctl *padctl) +{ + return container_of(padctl, struct tegra186_xusb_padctl, base); +} + +/* USB 2.0 UTMI PHY support */ +static struct tegra_xusb_lane * +tegra186_usb2_lane_probe(struct tegra_xusb_pad *pad, struct device_node *np, + unsigned int index) +{ + struct tegra_xusb_usb2_lane *usb2; + int err; + + usb2 = kzalloc(sizeof(*usb2), GFP_KERNEL); + if (!usb2) + return ERR_PTR(-ENOMEM); + + INIT_LIST_HEAD(&usb2->base.list); + usb2->base.soc = &pad->soc->lanes[index]; + usb2->base.index = index; + usb2->base.pad = pad; + usb2->base.np = np; + + err = tegra_xusb_lane_parse_dt(&usb2->base, np); + if (err < 0) { + kfree(usb2); + return ERR_PTR(err); + } + + return &usb2->base; +} + +static void tegra186_usb2_lane_remove(struct tegra_xusb_lane *lane) +{ + struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(lane); + + kfree(usb2); +} + +static const struct tegra_xusb_lane_ops tegra186_usb2_lane_ops = { + .probe = tegra186_usb2_lane_probe, + .remove = tegra186_usb2_lane_remove, +}; + +static void tegra186_utmi_bias_pad_power_on(struct tegra_xusb_padctl *padctl) +{ + struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl); + struct device *dev = padctl->dev; + u32 value; + int err; + + mutex_lock(&padctl->lock); + + if (priv->bias_pad_enable++ > 0) { + mutex_unlock(&padctl->lock); + return; + } + + err = clk_prepare_enable(priv->usb2_trk_clk); + if (err < 0) + dev_warn(dev, "failed to enable USB2 trk clock: %d\n", err); + + value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1); + value &= ~USB2_TRK_START_TIMER(~0); + value |= USB2_TRK_START_TIMER(0x1e); + value &= ~USB2_TRK_DONE_RESET_TIMER(~0); + value |= USB2_TRK_DONE_RESET_TIMER(0xa); + padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1); + + value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL0); + value &= ~BIAS_PAD_PD; + value &= ~HS_SQUELCH_LEVEL(~0); + value |= HS_SQUELCH_LEVEL(priv->calib.hs_squelch); + padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL0); + + udelay(1); + + value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1); + value &= ~USB2_PD_TRK; + padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1); + + mutex_unlock(&padctl->lock); +} + +static void tegra186_utmi_bias_pad_power_off(struct tegra_xusb_padctl *padctl) +{ + struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl); + u32 value; + + mutex_lock(&padctl->lock); + + if (WARN_ON(priv->bias_pad_enable == 0)) { + mutex_unlock(&padctl->lock); + return; + } + + if (--priv->bias_pad_enable > 0) { + mutex_unlock(&padctl->lock); + return; + } + + value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1); + value |= USB2_PD_TRK; + padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1); + + clk_disable_unprepare(priv->usb2_trk_clk); + + mutex_unlock(&padctl->lock); +} + +static void tegra_phy_xusb_utmi_pad_power_on(struct phy *phy) +{ + struct tegra_xusb_lane *lane = phy_get_drvdata(phy); + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + struct tegra_xusb_usb2_port *port; + struct device *dev = padctl->dev; + unsigned int index = lane->index; + u32 value; + + if (!phy) + return; + + port = tegra_xusb_find_usb2_port(padctl, index); + if (!port) { + dev_err(dev, "no port found for USB2 lane %u\n", index); + return; + } + + tegra186_utmi_bias_pad_power_on(padctl); + + udelay(2); + + value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index)); + value &= ~USB2_OTG_PD; + padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index)); + + value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index)); + value &= ~USB2_OTG_PD_DR; + padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index)); +} + +static void tegra_phy_xusb_utmi_pad_power_down(struct phy *phy) +{ + struct tegra_xusb_lane *lane = phy_get_drvdata(phy); + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + unsigned int index = lane->index; + u32 value; + + if (!phy) + return; + + value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index)); + value |= USB2_OTG_PD; + padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index)); + + value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index)); + value |= USB2_OTG_PD_DR; + padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index)); + + udelay(2); + + tegra186_utmi_bias_pad_power_off(padctl); +} + +static int tegra186_utmi_phy_power_on(struct phy *phy) +{ + struct tegra_xusb_lane *lane = phy_get_drvdata(phy); + struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(lane); + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl); + struct tegra_xusb_usb2_port *port; + unsigned int index = lane->index; + struct device *dev = padctl->dev; + u32 value; + + port = tegra_xusb_find_usb2_port(padctl, index); + if (!port) { + dev_err(dev, "no port found for USB2 lane %u\n", index); + return -ENODEV; + } + + value = padctl_readl(padctl, XUSB_PADCTL_USB2_PAD_MUX); + value &= ~(USB2_PORT_MASK << USB2_PORT_SHIFT(index)); + value |= (PORT_XUSB << USB2_PORT_SHIFT(index)); + padctl_writel(padctl, value, XUSB_PADCTL_USB2_PAD_MUX); + + value = padctl_readl(padctl, XUSB_PADCTL_USB2_PORT_CAP); + value &= ~(PORT_CAP_MASK << PORTX_CAP_SHIFT(index)); + + if (port->mode == USB_DR_MODE_UNKNOWN) + value |= (PORT_CAP_DISABLED << PORTX_CAP_SHIFT(index)); + else if (port->mode == USB_DR_MODE_PERIPHERAL) + value |= (PORT_CAP_DEVICE << PORTX_CAP_SHIFT(index)); + else if (port->mode == USB_DR_MODE_HOST) + value |= (PORT_CAP_HOST << PORTX_CAP_SHIFT(index)); + else if (port->mode == USB_DR_MODE_OTG) + value |= (PORT_CAP_OTG << PORTX_CAP_SHIFT(index)); + + padctl_writel(padctl, value, XUSB_PADCTL_USB2_PORT_CAP); + + value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index)); + value &= ~USB2_OTG_PD_ZI; + value |= TERM_SEL; + value &= ~HS_CURR_LEVEL(~0); + + if (usb2->hs_curr_level_offset) { + int hs_current_level; + + hs_current_level = (int)priv->calib.hs_curr_level[index] + + usb2->hs_curr_level_offset; + + if (hs_current_level < 0) + hs_current_level = 0; + if (hs_current_level > 0x3f) + hs_current_level = 0x3f; + + value |= HS_CURR_LEVEL(hs_current_level); + } else { + value |= HS_CURR_LEVEL(priv->calib.hs_curr_level[index]); + } + + padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index)); + + value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index)); + value &= ~TERM_RANGE_ADJ(~0); + value |= TERM_RANGE_ADJ(priv->calib.hs_term_range_adj); + value &= ~RPD_CTRL(~0); + value |= RPD_CTRL(priv->calib.rpd_ctrl); + padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index)); + + /* TODO: pad power saving */ + tegra_phy_xusb_utmi_pad_power_on(phy); + return 0; +} + +static int tegra186_utmi_phy_power_off(struct phy *phy) +{ + /* TODO: pad power saving */ + tegra_phy_xusb_utmi_pad_power_down(phy); + + return 0; +} + +static int tegra186_utmi_phy_init(struct phy *phy) +{ + struct tegra_xusb_lane *lane = phy_get_drvdata(phy); + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + struct tegra_xusb_usb2_port *port; + unsigned int index = lane->index; + struct device *dev = padctl->dev; + int err; + + port = tegra_xusb_find_usb2_port(padctl, index); + if (!port) { + dev_err(dev, "no port found for USB2 lane %u\n", index); + return -ENODEV; + } + + if (port->supply && port->mode == USB_DR_MODE_HOST) { + err = regulator_enable(port->supply); + if (err) { + dev_err(dev, "failed to enable port %u VBUS: %d\n", + index, err); + return err; + } + } + + return 0; +} + +static int tegra186_utmi_phy_exit(struct phy *phy) +{ + struct tegra_xusb_lane *lane = phy_get_drvdata(phy); + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + struct tegra_xusb_usb2_port *port; + unsigned int index = lane->index; + struct device *dev = padctl->dev; + int err; + + port = tegra_xusb_find_usb2_port(padctl, index); + if (!port) { + dev_err(dev, "no port found for USB2 lane %u\n", index); + return -ENODEV; + } + + if (port->supply && port->mode == USB_DR_MODE_HOST) { + err = regulator_disable(port->supply); + if (err) { + dev_err(dev, "failed to disable port %u VBUS: %d\n", + index, err); + return err; + } + } + + return 0; +} + +static const struct phy_ops utmi_phy_ops = { + .init = tegra186_utmi_phy_init, + .exit = tegra186_utmi_phy_exit, + .power_on = tegra186_utmi_phy_power_on, + .power_off = tegra186_utmi_phy_power_off, + .owner = THIS_MODULE, +}; + +static struct tegra_xusb_pad * +tegra186_usb2_pad_probe(struct tegra_xusb_padctl *padctl, + const struct tegra_xusb_pad_soc *soc, + struct device_node *np) +{ + struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl); + struct tegra_xusb_usb2_pad *usb2; + struct tegra_xusb_pad *pad; + int err; + + usb2 = kzalloc(sizeof(*usb2), GFP_KERNEL); + if (!usb2) + return ERR_PTR(-ENOMEM); + + pad = &usb2->base; + pad->ops = &tegra186_usb2_lane_ops; + pad->soc = soc; + + err = tegra_xusb_pad_init(pad, padctl, np); + if (err < 0) { + kfree(usb2); + goto out; + } + + priv->usb2_trk_clk = devm_clk_get(&pad->dev, "trk"); + if (IS_ERR(priv->usb2_trk_clk)) { + err = PTR_ERR(priv->usb2_trk_clk); + dev_dbg(&pad->dev, "failed to get usb2 trk clock: %d\n", err); + goto unregister; + } + + err = tegra_xusb_pad_register(pad, &utmi_phy_ops); + if (err < 0) + goto unregister; + + dev_set_drvdata(&pad->dev, pad); + + return pad; + +unregister: + device_unregister(&pad->dev); +out: + return ERR_PTR(err); +} + +static void tegra186_usb2_pad_remove(struct tegra_xusb_pad *pad) +{ + struct tegra_xusb_usb2_pad *usb2 = to_usb2_pad(pad); + + kfree(usb2); +} + +static const struct tegra_xusb_pad_ops tegra186_usb2_pad_ops = { + .probe = tegra186_usb2_pad_probe, + .remove = tegra186_usb2_pad_remove, +}; + +static const char * const tegra186_usb2_functions[] = { + "xusb", +}; + +static const struct tegra_xusb_lane_soc tegra186_usb2_lanes[] = { + TEGRA186_LANE("usb2-0", 0, 0, 0, usb2), + TEGRA186_LANE("usb2-1", 0, 0, 0, usb2), + TEGRA186_LANE("usb2-2", 0, 0, 0, usb2), +}; + +static const struct tegra_xusb_pad_soc tegra186_usb2_pad = { + .name = "usb2", + .num_lanes = ARRAY_SIZE(tegra186_usb2_lanes), + .lanes = tegra186_usb2_lanes, + .ops = &tegra186_usb2_pad_ops, +}; + +static int tegra186_usb2_port_enable(struct tegra_xusb_port *port) +{ + return 0; +} + +static void tegra186_usb2_port_disable(struct tegra_xusb_port *port) +{ +} + +static struct tegra_xusb_lane * +tegra186_usb2_port_map(struct tegra_xusb_port *port) +{ + return tegra_xusb_find_lane(port->padctl, "usb2", port->index); +} + +static const struct tegra_xusb_port_ops tegra186_usb2_port_ops = { + .enable = tegra186_usb2_port_enable, + .disable = tegra186_usb2_port_disable, + .map = tegra186_usb2_port_map, +}; + +/* SuperSpeed PHY support */ +static struct tegra_xusb_lane * +tegra186_usb3_lane_probe(struct tegra_xusb_pad *pad, struct device_node *np, + unsigned int index) +{ + struct tegra_xusb_usb3_lane *usb3; + int err; + + usb3 = kzalloc(sizeof(*usb3), GFP_KERNEL); + if (!usb3) + return ERR_PTR(-ENOMEM); + + INIT_LIST_HEAD(&usb3->base.list); + usb3->base.soc = &pad->soc->lanes[index]; + usb3->base.index = index; + usb3->base.pad = pad; + usb3->base.np = np; + + err = tegra_xusb_lane_parse_dt(&usb3->base, np); + if (err < 0) { + kfree(usb3); + return ERR_PTR(err); + } + + return &usb3->base; +} + +static void tegra186_usb3_lane_remove(struct tegra_xusb_lane *lane) +{ + struct tegra_xusb_usb3_lane *usb3 = to_usb3_lane(lane); + + kfree(usb3); +} + +static const struct tegra_xusb_lane_ops tegra186_usb3_lane_ops = { + .probe = tegra186_usb3_lane_probe, + .remove = tegra186_usb3_lane_remove, +}; +static int tegra186_usb3_port_enable(struct tegra_xusb_port *port) +{ + return 0; +} + +static void tegra186_usb3_port_disable(struct tegra_xusb_port *port) +{ +} + +static struct tegra_xusb_lane * +tegra186_usb3_port_map(struct tegra_xusb_port *port) +{ + return tegra_xusb_find_lane(port->padctl, "usb3", port->index); +} + +static const struct tegra_xusb_port_ops tegra186_usb3_port_ops = { + .enable = tegra186_usb3_port_enable, + .disable = tegra186_usb3_port_disable, + .map = tegra186_usb3_port_map, +}; + +static int tegra186_usb3_phy_power_on(struct phy *phy) +{ + struct tegra_xusb_lane *lane = phy_get_drvdata(phy); + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + struct tegra_xusb_usb3_port *port; + struct tegra_xusb_usb2_port *usb2; + unsigned int index = lane->index; + struct device *dev = padctl->dev; + u32 value; + + port = tegra_xusb_find_usb3_port(padctl, index); + if (!port) { + dev_err(dev, "no port found for USB3 lane %u\n", index); + return -ENODEV; + } + + usb2 = tegra_xusb_find_usb2_port(padctl, port->port); + if (!usb2) { + dev_err(dev, "no companion port found for USB3 lane %u\n", + index); + return -ENODEV; + } + + mutex_lock(&padctl->lock); + + value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_CAP); + value &= ~(PORT_CAP_MASK << PORTX_CAP_SHIFT(index)); + + if (usb2->mode == USB_DR_MODE_UNKNOWN) + value |= (PORT_CAP_DISABLED << PORTX_CAP_SHIFT(index)); + else if (usb2->mode == USB_DR_MODE_PERIPHERAL) + value |= (PORT_CAP_DEVICE << PORTX_CAP_SHIFT(index)); + else if (usb2->mode == USB_DR_MODE_HOST) + value |= (PORT_CAP_HOST << PORTX_CAP_SHIFT(index)); + else if (usb2->mode == USB_DR_MODE_OTG) + value |= (PORT_CAP_OTG << PORTX_CAP_SHIFT(index)); + + padctl_writel(padctl, value, XUSB_PADCTL_SS_PORT_CAP); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1); + value &= ~SSPX_ELPG_VCORE_DOWN(index); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1); + + usleep_range(100, 200); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1); + value &= ~SSPX_ELPG_CLAMP_EN_EARLY(index); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1); + + usleep_range(100, 200); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1); + value &= ~SSPX_ELPG_CLAMP_EN(index); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1); + + mutex_unlock(&padctl->lock); + + return 0; +} + +static int tegra186_usb3_phy_power_off(struct phy *phy) +{ + struct tegra_xusb_lane *lane = phy_get_drvdata(phy); + struct tegra_xusb_padctl *padctl = lane->pad->padctl; + struct tegra_xusb_usb3_port *port; + unsigned int index = lane->index; + struct device *dev = padctl->dev; + u32 value; + + port = tegra_xusb_find_usb3_port(padctl, index); + if (!port) { + dev_err(dev, "no port found for USB3 lane %u\n", index); + return -ENODEV; + } + + mutex_lock(&padctl->lock); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1); + value |= SSPX_ELPG_CLAMP_EN_EARLY(index); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1); + + usleep_range(100, 200); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1); + value |= SSPX_ELPG_CLAMP_EN(index); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1); + + usleep_range(250, 350); + + value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1); + value |= SSPX_ELPG_VCORE_DOWN(index); + padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1); + + mutex_unlock(&padctl->lock); + + return 0; +} + +static int tegra186_usb3_phy_init(struct phy *phy) +{ + return 0; +} + +static int tegra186_usb3_phy_exit(struct phy *phy) +{ + return 0; +} + +static const struct phy_ops usb3_phy_ops = { + .init = tegra186_usb3_phy_init, + .exit = tegra186_usb3_phy_exit, + .power_on = tegra186_usb3_phy_power_on, + .power_off = tegra186_usb3_phy_power_off, + .owner = THIS_MODULE, +}; + +static struct tegra_xusb_pad * +tegra186_usb3_pad_probe(struct tegra_xusb_padctl *padctl, + const struct tegra_xusb_pad_soc *soc, + struct device_node *np) +{ + struct tegra_xusb_usb3_pad *usb3; + struct tegra_xusb_pad *pad; + int err; + + usb3 = kzalloc(sizeof(*usb3), GFP_KERNEL); + if (!usb3) + return ERR_PTR(-ENOMEM); + + pad = &usb3->base; + pad->ops = &tegra186_usb3_lane_ops; + pad->soc = soc; + + err = tegra_xusb_pad_init(pad, padctl, np); + if (err < 0) { + kfree(usb3); + goto out; + } + + err = tegra_xusb_pad_register(pad, &usb3_phy_ops); + if (err < 0) + goto unregister; + + dev_set_drvdata(&pad->dev, pad); + + return pad; + +unregister: + device_unregister(&pad->dev); +out: + return ERR_PTR(err); +} + +static void tegra186_usb3_pad_remove(struct tegra_xusb_pad *pad) +{ + struct tegra_xusb_usb2_pad *usb2 = to_usb2_pad(pad); + + kfree(usb2); +} + +static const struct tegra_xusb_pad_ops tegra186_usb3_pad_ops = { + .probe = tegra186_usb3_pad_probe, + .remove = tegra186_usb3_pad_remove, +}; + +static const char * const tegra186_usb3_functions[] = { + "xusb", +}; + +static const struct tegra_xusb_lane_soc tegra186_usb3_lanes[] = { + TEGRA186_LANE("usb3-0", 0, 0, 0, usb3), + TEGRA186_LANE("usb3-1", 0, 0, 0, usb3), + TEGRA186_LANE("usb3-2", 0, 0, 0, usb3), +}; + +static const struct tegra_xusb_pad_soc tegra186_usb3_pad = { + .name = "usb3", + .num_lanes = ARRAY_SIZE(tegra186_usb3_lanes), + .lanes = tegra186_usb3_lanes, + .ops = &tegra186_usb3_pad_ops, +}; + +static const struct tegra_xusb_pad_soc * const tegra186_pads[] = { + &tegra186_usb2_pad, + &tegra186_usb3_pad, +#if 0 /* TODO implement */ + &tegra186_hsic_pad, +#endif +}; + +static int +tegra186_xusb_read_fuse_calibration(struct tegra186_xusb_padctl *padctl) +{ + struct device *dev = padctl->base.dev; + unsigned int i, count; + u32 value, *level; + int err; + + count = padctl->base.soc->ports.usb2.count; + + level = devm_kcalloc(dev, count, sizeof(u32), GFP_KERNEL); + if (!level) + return -ENOMEM; + + err = tegra_fuse_readl(TEGRA_FUSE_SKU_CALIB_0, &value); + if (err) { + dev_err(dev, "failed to read calibration fuse: %d\n", err); + return err; + } + + dev_dbg(dev, "FUSE_USB_CALIB_0 %#x\n", value); + + for (i = 0; i < count; i++) + level[i] = (value >> HS_CURR_LEVEL_PADX_SHIFT(i)) & + HS_CURR_LEVEL_PAD_MASK; + + padctl->calib.hs_curr_level = level; + + padctl->calib.hs_squelch = (value >> HS_SQUELCH_SHIFT) & + HS_SQUELCH_MASK; + padctl->calib.hs_term_range_adj = (value >> HS_TERM_RANGE_ADJ_SHIFT) & + HS_TERM_RANGE_ADJ_MASK; + + err = tegra_fuse_readl(TEGRA_FUSE_USB_CALIB_EXT_0, &value); + if (err) { + dev_err(dev, "failed to read calibration fuse: %d\n", err); + return err; + } + + dev_dbg(dev, "FUSE_USB_CALIB_EXT_0 %#x\n", value); + + padctl->calib.rpd_ctrl = (value >> RPD_CTRL_SHIFT) & RPD_CTRL_MASK; + + return 0; +} + +static struct tegra_xusb_padctl * +tegra186_xusb_padctl_probe(struct device *dev, + const struct tegra_xusb_padctl_soc *soc) +{ + struct tegra186_xusb_padctl *priv; + int err; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return ERR_PTR(-ENOMEM); + + priv->base.dev = dev; + priv->base.soc = soc; + + err = tegra186_xusb_read_fuse_calibration(priv); + if (err < 0) + return ERR_PTR(err); + + return &priv->base; +} + +static void tegra186_xusb_padctl_remove(struct tegra_xusb_padctl *padctl) +{ +} + +static const struct tegra_xusb_padctl_ops tegra186_xusb_padctl_ops = { + .probe = tegra186_xusb_padctl_probe, + .remove = tegra186_xusb_padctl_remove, +}; + +static const char * const tegra186_xusb_padctl_supply_names[] = { + "avdd-pll-erefeut", + "avdd-usb", + "vclamp-usb", + "vddio-hsic", +}; + +const struct tegra_xusb_padctl_soc tegra186_xusb_padctl_soc = { + .num_pads = ARRAY_SIZE(tegra186_pads), + .pads = tegra186_pads, + .ports = { + .usb2 = { + .ops = &tegra186_usb2_port_ops, + .count = 3, + }, +#if 0 /* TODO implement */ + .hsic = { + .ops = &tegra186_hsic_port_ops, + .count = 1, + }, +#endif + .usb3 = { + .ops = &tegra186_usb3_port_ops, + .count = 3, + }, + }, + .ops = &tegra186_xusb_padctl_ops, + .supply_names = tegra186_xusb_padctl_supply_names, + .num_supplies = ARRAY_SIZE(tegra186_xusb_padctl_supply_names), +}; +EXPORT_SYMBOL_GPL(tegra186_xusb_padctl_soc); + +MODULE_AUTHOR("JC Kuo <jckuo@nvidia.com>"); +MODULE_DESCRIPTION("NVIDIA Tegra186 XUSB Pad Controller driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c index 5b3b8863363e..0417213ed68b 100644 --- a/drivers/phy/tegra/xusb.c +++ b/drivers/phy/tegra/xusb.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2014-2015, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2014-2016, NVIDIA CORPORATION. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -68,6 +68,12 @@ static const struct of_device_id tegra_xusb_padctl_of_match[] = { .data = &tegra210_xusb_padctl_soc, }, #endif +#if defined(CONFIG_ARCH_TEGRA_186_SOC) + { + .compatible = "nvidia,tegra186-xusb-padctl", + .data = &tegra186_xusb_padctl_soc, + }, +#endif { } }; MODULE_DEVICE_TABLE(of, tegra_xusb_padctl_of_match); @@ -313,6 +319,10 @@ static void tegra_xusb_lane_program(struct tegra_xusb_lane *lane) const struct tegra_xusb_lane_soc *soc = lane->soc; u32 value; + /* skip single function lanes */ + if (soc->num_funcs < 2) + return; + /* choose function */ value = padctl_readl(padctl, soc->offset); value &= ~(soc->mask << soc->shift); @@ -542,13 +552,34 @@ static void tegra_xusb_port_unregister(struct tegra_xusb_port *port) device_unregister(&port->dev); } +static const char *const modes[] = { + [USB_DR_MODE_UNKNOWN] = "", + [USB_DR_MODE_HOST] = "host", + [USB_DR_MODE_PERIPHERAL] = "peripheral", + [USB_DR_MODE_OTG] = "otg", +}; + static int tegra_xusb_usb2_port_parse_dt(struct tegra_xusb_usb2_port *usb2) { struct tegra_xusb_port *port = &usb2->base; struct device_node *np = port->dev.of_node; + const char *mode; usb2->internal = of_property_read_bool(np, "nvidia,internal"); + if (!of_property_read_string(np, "mode", &mode)) { + int err = match_string(modes, ARRAY_SIZE(modes), mode); + if (err < 0) { + dev_err(&port->dev, "invalid value %s for \"mode\"\n", + mode); + usb2->mode = USB_DR_MODE_UNKNOWN; + } else { + usb2->mode = err; + } + } else { + usb2->mode = USB_DR_MODE_HOST; + } + usb2->supply = devm_regulator_get(&port->dev, "vbus"); return PTR_ERR_OR_ZERO(usb2->supply); } @@ -839,6 +870,7 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev) struct tegra_xusb_padctl *padctl; const struct of_device_id *match; struct resource *res; + unsigned int i; int err; /* for backwards compatibility with old device trees */ @@ -876,14 +908,38 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev) goto remove; } + padctl->supplies = devm_kcalloc(&pdev->dev, padctl->soc->num_supplies, + sizeof(*padctl->supplies), GFP_KERNEL); + if (!padctl->supplies) { + err = -ENOMEM; + goto remove; + } + + for (i = 0; i < padctl->soc->num_supplies; i++) + padctl->supplies[i].supply = padctl->soc->supply_names[i]; + + err = devm_regulator_bulk_get(&pdev->dev, padctl->soc->num_supplies, + padctl->supplies); + if (err < 0) { + dev_err(&pdev->dev, "failed to get regulators: %d\n", err); + goto remove; + } + err = reset_control_deassert(padctl->rst); if (err < 0) goto remove; + err = regulator_bulk_enable(padctl->soc->num_supplies, + padctl->supplies); + if (err < 0) { + dev_err(&pdev->dev, "failed to enable supplies: %d\n", err); + goto reset; + } + err = tegra_xusb_setup_pads(padctl); if (err < 0) { dev_err(&pdev->dev, "failed to setup pads: %d\n", err); - goto reset; + goto power_down; } err = tegra_xusb_setup_ports(padctl); @@ -896,6 +952,8 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev) remove_pads: tegra_xusb_remove_pads(padctl); +power_down: + regulator_bulk_disable(padctl->soc->num_supplies, padctl->supplies); reset: reset_control_assert(padctl->rst); remove: @@ -911,6 +969,11 @@ static int tegra_xusb_padctl_remove(struct platform_device *pdev) tegra_xusb_remove_ports(padctl); tegra_xusb_remove_pads(padctl); + err = regulator_bulk_disable(padctl->soc->num_supplies, + padctl->supplies); + if (err < 0) + dev_err(&pdev->dev, "failed to disable supplies: %d\n", err); + err = reset_control_assert(padctl->rst); if (err < 0) dev_err(&pdev->dev, "failed to assert reset: %d\n", err); diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h index b49dbc36efa3..e0028b9fe702 100644 --- a/drivers/phy/tegra/xusb.h +++ b/drivers/phy/tegra/xusb.h @@ -19,6 +19,8 @@ #include <linux/mutex.h> #include <linux/workqueue.h> +#include <linux/usb/otg.h> + /* legacy entry points for backwards-compatibility */ int tegra_xusb_padctl_legacy_probe(struct platform_device *pdev); int tegra_xusb_padctl_legacy_remove(struct platform_device *pdev); @@ -54,10 +56,21 @@ struct tegra_xusb_lane { int tegra_xusb_lane_parse_dt(struct tegra_xusb_lane *lane, struct device_node *np); +struct tegra_xusb_usb3_lane { + struct tegra_xusb_lane base; +}; + +static inline struct tegra_xusb_usb3_lane * +to_usb3_lane(struct tegra_xusb_lane *lane) +{ + return container_of(lane, struct tegra_xusb_usb3_lane, base); +} + struct tegra_xusb_usb2_lane { struct tegra_xusb_lane base; u32 hs_curr_level_offset; + bool powered_on; }; static inline struct tegra_xusb_usb2_lane * @@ -168,6 +181,19 @@ int tegra_xusb_pad_register(struct tegra_xusb_pad *pad, const struct phy_ops *ops); void tegra_xusb_pad_unregister(struct tegra_xusb_pad *pad); +struct tegra_xusb_usb3_pad { + struct tegra_xusb_pad base; + + unsigned int enable; + struct mutex lock; +}; + +static inline struct tegra_xusb_usb3_pad * +to_usb3_pad(struct tegra_xusb_pad *pad) +{ + return container_of(pad, struct tegra_xusb_usb3_pad, base); +} + struct tegra_xusb_usb2_pad { struct tegra_xusb_pad base; @@ -271,6 +297,7 @@ struct tegra_xusb_usb2_port { struct tegra_xusb_port base; struct regulator *supply; + enum usb_dr_mode mode; bool internal; }; @@ -367,6 +394,9 @@ struct tegra_xusb_padctl_soc { } ports; const struct tegra_xusb_padctl_ops *ops; + + const char * const *supply_names; + unsigned int num_supplies; }; struct tegra_xusb_padctl { @@ -390,6 +420,8 @@ struct tegra_xusb_padctl { unsigned int enable; struct clk *clk; + + struct regulator_bulk_data *supplies; }; static inline void padctl_writel(struct tegra_xusb_padctl *padctl, u32 value, @@ -417,5 +449,8 @@ extern const struct tegra_xusb_padctl_soc tegra124_xusb_padctl_soc; #if defined(CONFIG_ARCH_TEGRA_210_SOC) extern const struct tegra_xusb_padctl_soc tegra210_xusb_padctl_soc; #endif +#if defined(CONFIG_ARCH_TEGRA_186_SOC) +extern const struct tegra_xusb_padctl_soc tegra186_xusb_padctl_soc; +#endif #endif /* __PHY_TEGRA_XUSB_H */ diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig index 103efc456a12..d658275f6164 100644 --- a/drivers/phy/ti/Kconfig +++ b/drivers/phy/ti/Kconfig @@ -20,6 +20,18 @@ config PHY_DM816X_USB help Enable this for dm816x USB to work. +config PHY_AM654_SERDES + tristate "TI AM654 SERDES support" + depends on OF && ARCH_K3 || COMPILE_TEST + depends on COMMON_CLK + select GENERIC_PHY + select MULTIPLEXER + select REGMAP_MMIO + select MUX_MMIO + help + This option enables support for TI AM654 SerDes PHY used for + PCIe. + config OMAP_CONTROL_PHY tristate "OMAP CONTROL PHY Driver" depends on ARCH_OMAP2PLUS || COMPILE_TEST diff --git a/drivers/phy/ti/Makefile b/drivers/phy/ti/Makefile index bea8f25a137a..bff901eb0ecc 100644 --- a/drivers/phy/ti/Makefile +++ b/drivers/phy/ti/Makefile @@ -6,4 +6,5 @@ obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o +obj-$(CONFIG_PHY_AM654_SERDES) += phy-am654-serdes.o obj-$(CONFIG_PHY_TI_GMII_SEL) += phy-gmii-sel.o diff --git a/drivers/phy/ti/phy-am654-serdes.c b/drivers/phy/ti/phy-am654-serdes.c new file mode 100644 index 000000000000..d3769200cb9b --- /dev/null +++ b/drivers/phy/ti/phy-am654-serdes.c @@ -0,0 +1,658 @@ +// SPDX-License-Identifier: GPL-2.0 +/** + * PCIe SERDES driver for AM654x SoC + * + * Copyright (C) 2018 - 2019 Texas Instruments Incorporated - http://www.ti.com/ + * Author: Kishon Vijay Abraham I <kishon@ti.com> + */ + +#include <dt-bindings/phy/phy.h> +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/mfd/syscon.h> +#include <linux/mux/consumer.h> +#include <linux/of_address.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/regmap.h> + +#define CMU_R07C 0x7c + +#define COMLANE_R138 0xb38 +#define VERSION 0x70 + +#define COMLANE_R190 0xb90 + +#define COMLANE_R194 0xb94 + +#define SERDES_CTRL 0x1fd0 + +#define WIZ_LANEXCTL_STS 0x1fe0 +#define TX0_DISABLE_STATE 0x4 +#define TX0_SLEEP_STATE 0x5 +#define TX0_SNOOZE_STATE 0x6 +#define TX0_ENABLE_STATE 0x7 + +#define RX0_DISABLE_STATE 0x4 +#define RX0_SLEEP_STATE 0x5 +#define RX0_SNOOZE_STATE 0x6 +#define RX0_ENABLE_STATE 0x7 + +#define WIZ_PLL_CTRL 0x1ff4 +#define PLL_DISABLE_STATE 0x4 +#define PLL_SLEEP_STATE 0x5 +#define PLL_SNOOZE_STATE 0x6 +#define PLL_ENABLE_STATE 0x7 + +#define PLL_LOCK_TIME 100000 /* in microseconds */ +#define SLEEP_TIME 100 /* in microseconds */ + +#define LANE_USB3 0x0 +#define LANE_PCIE0_LANE0 0x1 + +#define LANE_PCIE1_LANE0 0x0 +#define LANE_PCIE0_LANE1 0x1 + +#define SERDES_NUM_CLOCKS 3 + +#define AM654_SERDES_CTRL_CLKSEL_MASK GENMASK(7, 4) +#define AM654_SERDES_CTRL_CLKSEL_SHIFT 4 + +struct serdes_am654_clk_mux { + struct clk_hw hw; + struct regmap *regmap; + unsigned int reg; + int clk_id; + struct clk_init_data clk_data; +}; + +#define to_serdes_am654_clk_mux(_hw) \ + container_of(_hw, struct serdes_am654_clk_mux, hw) + +static struct regmap_config serdes_am654_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .fast_io = true, +}; + +static const struct reg_field cmu_master_cdn_o = REG_FIELD(CMU_R07C, 24, 24); +static const struct reg_field config_version = REG_FIELD(COMLANE_R138, 16, 23); +static const struct reg_field l1_master_cdn_o = REG_FIELD(COMLANE_R190, 9, 9); +static const struct reg_field cmu_ok_i_0 = REG_FIELD(COMLANE_R194, 19, 19); +static const struct reg_field por_en = REG_FIELD(SERDES_CTRL, 29, 29); +static const struct reg_field tx0_enable = REG_FIELD(WIZ_LANEXCTL_STS, 29, 31); +static const struct reg_field rx0_enable = REG_FIELD(WIZ_LANEXCTL_STS, 13, 15); +static const struct reg_field pll_enable = REG_FIELD(WIZ_PLL_CTRL, 29, 31); +static const struct reg_field pll_ok = REG_FIELD(WIZ_PLL_CTRL, 28, 28); + +struct serdes_am654 { + struct regmap *regmap; + struct regmap_field *cmu_master_cdn_o; + struct regmap_field *config_version; + struct regmap_field *l1_master_cdn_o; + struct regmap_field *cmu_ok_i_0; + struct regmap_field *por_en; + struct regmap_field *tx0_enable; + struct regmap_field *rx0_enable; + struct regmap_field *pll_enable; + struct regmap_field *pll_ok; + + struct device *dev; + struct mux_control *control; + bool busy; + u32 type; + struct device_node *of_node; + struct clk_onecell_data clk_data; + struct clk *clks[SERDES_NUM_CLOCKS]; +}; + +static int serdes_am654_enable_pll(struct serdes_am654 *phy) +{ + int ret; + u32 val; + + ret = regmap_field_write(phy->pll_enable, PLL_ENABLE_STATE); + if (ret) + return ret; + + return regmap_field_read_poll_timeout(phy->pll_ok, val, val, 1000, + PLL_LOCK_TIME); +} + +static void serdes_am654_disable_pll(struct serdes_am654 *phy) +{ + struct device *dev = phy->dev; + int ret; + + ret = regmap_field_write(phy->pll_enable, PLL_DISABLE_STATE); + if (ret) + dev_err(dev, "Failed to disable PLL\n"); +} + +static int serdes_am654_enable_txrx(struct serdes_am654 *phy) +{ + int ret; + + /* Enable TX */ + ret = regmap_field_write(phy->tx0_enable, TX0_ENABLE_STATE); + if (ret) + return ret; + + /* Enable RX */ + ret = regmap_field_write(phy->rx0_enable, RX0_ENABLE_STATE); + if (ret) + return ret; + + return 0; +} + +static int serdes_am654_disable_txrx(struct serdes_am654 *phy) +{ + int ret; + + /* Disable TX */ + ret = regmap_field_write(phy->tx0_enable, TX0_DISABLE_STATE); + if (ret) + return ret; + + /* Disable RX */ + ret = regmap_field_write(phy->rx0_enable, RX0_DISABLE_STATE); + if (ret) + return ret; + + return 0; +} + +static int serdes_am654_power_on(struct phy *x) +{ + struct serdes_am654 *phy = phy_get_drvdata(x); + struct device *dev = phy->dev; + int ret; + u32 val; + + ret = serdes_am654_enable_pll(phy); + if (ret) { + dev_err(dev, "Failed to enable PLL\n"); + return ret; + } + + ret = serdes_am654_enable_txrx(phy); + if (ret) { + dev_err(dev, "Failed to enable TX RX\n"); + return ret; + } + + return regmap_field_read_poll_timeout(phy->cmu_ok_i_0, val, val, + SLEEP_TIME, PLL_LOCK_TIME); +} + +static int serdes_am654_power_off(struct phy *x) +{ + struct serdes_am654 *phy = phy_get_drvdata(x); + + serdes_am654_disable_txrx(phy); + serdes_am654_disable_pll(phy); + + return 0; +} + +static int serdes_am654_init(struct phy *x) +{ + struct serdes_am654 *phy = phy_get_drvdata(x); + int ret; + + ret = regmap_field_write(phy->config_version, VERSION); + if (ret) + return ret; + + ret = regmap_field_write(phy->cmu_master_cdn_o, 0x1); + if (ret) + return ret; + + ret = regmap_field_write(phy->l1_master_cdn_o, 0x1); + if (ret) + return ret; + + return 0; +} + +static int serdes_am654_reset(struct phy *x) +{ + struct serdes_am654 *phy = phy_get_drvdata(x); + int ret; + + ret = regmap_field_write(phy->por_en, 0x1); + if (ret) + return ret; + + mdelay(1); + + ret = regmap_field_write(phy->por_en, 0x0); + if (ret) + return ret; + + return 0; +} + +static void serdes_am654_release(struct phy *x) +{ + struct serdes_am654 *phy = phy_get_drvdata(x); + + phy->type = PHY_NONE; + phy->busy = false; + mux_control_deselect(phy->control); +} + +struct phy *serdes_am654_xlate(struct device *dev, struct of_phandle_args + *args) +{ + struct serdes_am654 *am654_phy; + struct phy *phy; + int ret; + + phy = of_phy_simple_xlate(dev, args); + if (IS_ERR(phy)) + return phy; + + am654_phy = phy_get_drvdata(phy); + if (am654_phy->busy) + return ERR_PTR(-EBUSY); + + ret = mux_control_select(am654_phy->control, args->args[1]); + if (ret) { + dev_err(dev, "Failed to select SERDES Lane Function\n"); + return ERR_PTR(ret); + } + + am654_phy->busy = true; + am654_phy->type = args->args[0]; + + return phy; +} + +static const struct phy_ops ops = { + .reset = serdes_am654_reset, + .init = serdes_am654_init, + .power_on = serdes_am654_power_on, + .power_off = serdes_am654_power_off, + .release = serdes_am654_release, + .owner = THIS_MODULE, +}; + +#define SERDES_NUM_MUX_COMBINATIONS 16 + +#define LICLK 0 +#define EXT_REFCLK 1 +#define RICLK 2 + +static const int +serdes_am654_mux_table[SERDES_NUM_MUX_COMBINATIONS][SERDES_NUM_CLOCKS] = { + /* + * Each combination maps to one of + * "Figure 12-1986. SerDes Reference Clock Distribution" + * in TRM. + */ + /* Parent of CMU refclk, Left output, Right output + * either of EXT_REFCLK, LICLK, RICLK + */ + { EXT_REFCLK, EXT_REFCLK, EXT_REFCLK }, /* 0000 */ + { RICLK, EXT_REFCLK, EXT_REFCLK }, /* 0001 */ + { EXT_REFCLK, RICLK, LICLK }, /* 0010 */ + { RICLK, RICLK, EXT_REFCLK }, /* 0011 */ + { LICLK, EXT_REFCLK, EXT_REFCLK }, /* 0100 */ + { EXT_REFCLK, EXT_REFCLK, EXT_REFCLK }, /* 0101 */ + { LICLK, RICLK, LICLK }, /* 0110 */ + { EXT_REFCLK, RICLK, LICLK }, /* 0111 */ + { EXT_REFCLK, EXT_REFCLK, LICLK }, /* 1000 */ + { RICLK, EXT_REFCLK, LICLK }, /* 1001 */ + { EXT_REFCLK, RICLK, EXT_REFCLK }, /* 1010 */ + { RICLK, RICLK, EXT_REFCLK }, /* 1011 */ + { LICLK, EXT_REFCLK, LICLK }, /* 1100 */ + { EXT_REFCLK, EXT_REFCLK, LICLK }, /* 1101 */ + { LICLK, RICLK, EXT_REFCLK }, /* 1110 */ + { EXT_REFCLK, RICLK, EXT_REFCLK }, /* 1111 */ +}; + +static u8 serdes_am654_clk_mux_get_parent(struct clk_hw *hw) +{ + struct serdes_am654_clk_mux *mux = to_serdes_am654_clk_mux(hw); + struct regmap *regmap = mux->regmap; + unsigned int reg = mux->reg; + unsigned int val; + + regmap_read(regmap, reg, &val); + val &= AM654_SERDES_CTRL_CLKSEL_MASK; + val >>= AM654_SERDES_CTRL_CLKSEL_SHIFT; + + return serdes_am654_mux_table[val][mux->clk_id]; +} + +static int serdes_am654_clk_mux_set_parent(struct clk_hw *hw, u8 index) +{ + struct serdes_am654_clk_mux *mux = to_serdes_am654_clk_mux(hw); + struct regmap *regmap = mux->regmap; + unsigned int reg = mux->reg; + int clk_id = mux->clk_id; + int parents[SERDES_NUM_CLOCKS]; + const int *p; + u32 val; + int found, i; + int ret; + + /* get existing setting */ + regmap_read(regmap, reg, &val); + val &= AM654_SERDES_CTRL_CLKSEL_MASK; + val >>= AM654_SERDES_CTRL_CLKSEL_SHIFT; + + for (i = 0; i < SERDES_NUM_CLOCKS; i++) + parents[i] = serdes_am654_mux_table[val][i]; + + /* change parent of this clock. others left intact */ + parents[clk_id] = index; + + /* Find the match */ + for (val = 0; val < SERDES_NUM_MUX_COMBINATIONS; val++) { + p = serdes_am654_mux_table[val]; + found = 1; + for (i = 0; i < SERDES_NUM_CLOCKS; i++) { + if (parents[i] != p[i]) { + found = 0; + break; + } + } + + if (found) + break; + } + + if (!found) { + /* + * This can never happen, unless we missed + * a valid combination in serdes_am654_mux_table. + */ + WARN(1, "Failed to find the parent of %s clock\n", + hw->init->name); + return -EINVAL; + } + + val <<= AM654_SERDES_CTRL_CLKSEL_SHIFT; + ret = regmap_update_bits(regmap, reg, AM654_SERDES_CTRL_CLKSEL_MASK, + val); + + return ret; +} + +static const struct clk_ops serdes_am654_clk_mux_ops = { + .set_parent = serdes_am654_clk_mux_set_parent, + .get_parent = serdes_am654_clk_mux_get_parent, +}; + +static int serdes_am654_clk_register(struct serdes_am654 *am654_phy, + const char *clock_name, int clock_num) +{ + struct device_node *node = am654_phy->of_node; + struct device *dev = am654_phy->dev; + struct serdes_am654_clk_mux *mux; + struct device_node *regmap_node; + const char **parent_names; + struct clk_init_data *init; + unsigned int num_parents; + struct regmap *regmap; + const __be32 *addr; + unsigned int reg; + struct clk *clk; + + mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL); + if (!mux) + return -ENOMEM; + + init = &mux->clk_data; + + regmap_node = of_parse_phandle(node, "ti,serdes-clk", 0); + of_node_put(regmap_node); + if (!regmap_node) { + dev_err(dev, "Fail to get serdes-clk node\n"); + return -ENODEV; + } + + regmap = syscon_node_to_regmap(regmap_node->parent); + if (IS_ERR(regmap)) { + dev_err(dev, "Fail to get Syscon regmap\n"); + return PTR_ERR(regmap); + } + + num_parents = of_clk_get_parent_count(node); + if (num_parents < 2) { + dev_err(dev, "SERDES clock must have parents\n"); + return -EINVAL; + } + + parent_names = devm_kzalloc(dev, (sizeof(char *) * num_parents), + GFP_KERNEL); + if (!parent_names) + return -ENOMEM; + + of_clk_parent_fill(node, parent_names, num_parents); + + addr = of_get_address(regmap_node, 0, NULL, NULL); + if (!addr) + return -EINVAL; + + reg = be32_to_cpu(*addr); + + init->ops = &serdes_am654_clk_mux_ops; + init->flags = CLK_SET_RATE_NO_REPARENT; + init->parent_names = parent_names; + init->num_parents = num_parents; + init->name = clock_name; + + mux->regmap = regmap; + mux->reg = reg; + mux->clk_id = clock_num; + mux->hw.init = init; + + clk = devm_clk_register(dev, &mux->hw); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + am654_phy->clks[clock_num] = clk; + + return 0; +} + +static const struct of_device_id serdes_am654_id_table[] = { + { + .compatible = "ti,phy-am654-serdes", + }, + {} +}; +MODULE_DEVICE_TABLE(of, serdes_am654_id_table); + +static int serdes_am654_regfield_init(struct serdes_am654 *am654_phy) +{ + struct regmap *regmap = am654_phy->regmap; + struct device *dev = am654_phy->dev; + + am654_phy->cmu_master_cdn_o = devm_regmap_field_alloc(dev, regmap, + cmu_master_cdn_o); + if (IS_ERR(am654_phy->cmu_master_cdn_o)) { + dev_err(dev, "CMU_MASTER_CDN_O reg field init failed\n"); + return PTR_ERR(am654_phy->cmu_master_cdn_o); + } + + am654_phy->config_version = devm_regmap_field_alloc(dev, regmap, + config_version); + if (IS_ERR(am654_phy->config_version)) { + dev_err(dev, "CONFIG_VERSION reg field init failed\n"); + return PTR_ERR(am654_phy->config_version); + } + + am654_phy->l1_master_cdn_o = devm_regmap_field_alloc(dev, regmap, + l1_master_cdn_o); + if (IS_ERR(am654_phy->l1_master_cdn_o)) { + dev_err(dev, "L1_MASTER_CDN_O reg field init failed\n"); + return PTR_ERR(am654_phy->l1_master_cdn_o); + } + + am654_phy->cmu_ok_i_0 = devm_regmap_field_alloc(dev, regmap, + cmu_ok_i_0); + if (IS_ERR(am654_phy->cmu_ok_i_0)) { + dev_err(dev, "CMU_OK_I_0 reg field init failed\n"); + return PTR_ERR(am654_phy->cmu_ok_i_0); + } + + am654_phy->por_en = devm_regmap_field_alloc(dev, regmap, por_en); + if (IS_ERR(am654_phy->por_en)) { + dev_err(dev, "POR_EN reg field init failed\n"); + return PTR_ERR(am654_phy->por_en); + } + + am654_phy->tx0_enable = devm_regmap_field_alloc(dev, regmap, + tx0_enable); + if (IS_ERR(am654_phy->tx0_enable)) { + dev_err(dev, "TX0_ENABLE reg field init failed\n"); + return PTR_ERR(am654_phy->tx0_enable); + } + + am654_phy->rx0_enable = devm_regmap_field_alloc(dev, regmap, + rx0_enable); + if (IS_ERR(am654_phy->rx0_enable)) { + dev_err(dev, "RX0_ENABLE reg field init failed\n"); + return PTR_ERR(am654_phy->rx0_enable); + } + + am654_phy->pll_enable = devm_regmap_field_alloc(dev, regmap, + pll_enable); + if (IS_ERR(am654_phy->pll_enable)) { + dev_err(dev, "PLL_ENABLE reg field init failed\n"); + return PTR_ERR(am654_phy->pll_enable); + } + + am654_phy->pll_ok = devm_regmap_field_alloc(dev, regmap, pll_ok); + if (IS_ERR(am654_phy->pll_ok)) { + dev_err(dev, "PLL_OK reg field init failed\n"); + return PTR_ERR(am654_phy->pll_ok); + } + + return 0; +} + +static int serdes_am654_probe(struct platform_device *pdev) +{ + struct phy_provider *phy_provider; + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + struct clk_onecell_data *clk_data; + struct serdes_am654 *am654_phy; + struct mux_control *control; + const char *clock_name; + struct regmap *regmap; + void __iomem *base; + struct phy *phy; + int ret; + int i; + + am654_phy = devm_kzalloc(dev, sizeof(*am654_phy), GFP_KERNEL); + if (!am654_phy) + return -ENOMEM; + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return PTR_ERR(base); + + regmap = devm_regmap_init_mmio(dev, base, &serdes_am654_regmap_config); + if (IS_ERR(regmap)) { + dev_err(dev, "Failed to initialize regmap\n"); + return PTR_ERR(regmap); + } + + control = devm_mux_control_get(dev, NULL); + if (IS_ERR(control)) + return PTR_ERR(control); + + am654_phy->dev = dev; + am654_phy->of_node = node; + am654_phy->regmap = regmap; + am654_phy->control = control; + am654_phy->type = PHY_NONE; + + ret = serdes_am654_regfield_init(am654_phy); + if (ret) { + dev_err(dev, "Failed to initialize regfields\n"); + return ret; + } + + platform_set_drvdata(pdev, am654_phy); + + for (i = 0; i < SERDES_NUM_CLOCKS; i++) { + ret = of_property_read_string_index(node, "clock-output-names", + i, &clock_name); + if (ret) { + dev_err(dev, "Failed to get clock name\n"); + return ret; + } + + ret = serdes_am654_clk_register(am654_phy, clock_name, i); + if (ret) { + dev_err(dev, "Failed to initialize clock %s\n", + clock_name); + return ret; + } + } + + clk_data = &am654_phy->clk_data; + clk_data->clks = am654_phy->clks; + clk_data->clk_num = SERDES_NUM_CLOCKS; + ret = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data); + if (ret) + return ret; + + pm_runtime_enable(dev); + + phy = devm_phy_create(dev, NULL, &ops); + if (IS_ERR(phy)) + return PTR_ERR(phy); + + phy_set_drvdata(phy, am654_phy); + phy_provider = devm_of_phy_provider_register(dev, serdes_am654_xlate); + if (IS_ERR(phy_provider)) { + ret = PTR_ERR(phy_provider); + goto clk_err; + } + + return 0; + +clk_err: + of_clk_del_provider(node); + + return ret; +} + +static int serdes_am654_remove(struct platform_device *pdev) +{ + struct serdes_am654 *am654_phy = platform_get_drvdata(pdev); + struct device_node *node = am654_phy->of_node; + + pm_runtime_disable(&pdev->dev); + of_clk_del_provider(node); + + return 0; +} + +static struct platform_driver serdes_am654_driver = { + .probe = serdes_am654_probe, + .remove = serdes_am654_remove, + .driver = { + .name = "phy-am654", + .of_match_table = serdes_am654_id_table, + }, +}; +module_platform_driver(serdes_am654_driver); + +MODULE_AUTHOR("Texas Instruments Inc."); +MODULE_DESCRIPTION("TI AM654x SERDES driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/ti/phy-ti-pipe3.c b/drivers/phy/ti/phy-ti-pipe3.c index 68ce4a082b9b..739aaa0eb0ef 100644 --- a/drivers/phy/ti/phy-ti-pipe3.c +++ b/drivers/phy/ti/phy-ti-pipe3.c @@ -56,51 +56,73 @@ #define SATA_PLL_SOFT_RESET BIT(18) -#define PIPE3_PHY_PWRCTL_CLK_CMD_MASK 0x003FC000 +#define PIPE3_PHY_PWRCTL_CLK_CMD_MASK GENMASK(21, 14) #define PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT 14 -#define PIPE3_PHY_PWRCTL_CLK_FREQ_MASK 0xFFC00000 +#define PIPE3_PHY_PWRCTL_CLK_FREQ_MASK GENMASK(31, 22) #define PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT 22 -#define PIPE3_PHY_TX_RX_POWERON 0x3 -#define PIPE3_PHY_TX_RX_POWEROFF 0x0 +#define PIPE3_PHY_RX_POWERON (0x1 << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT) +#define PIPE3_PHY_TX_POWERON (0x2 << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT) #define PCIE_PCS_MASK 0xFF0000 #define PCIE_PCS_DELAY_COUNT_SHIFT 0x10 -#define PCIEPHYRX_ANA_PROGRAMMABILITY 0x0000000C +#define PIPE3_PHY_RX_ANA_PROGRAMMABILITY 0x0000000C #define INTERFACE_MASK GENMASK(31, 27) #define INTERFACE_SHIFT 27 +#define INTERFACE_MODE_USBSS BIT(4) +#define INTERFACE_MODE_SATA_1P5 BIT(3) +#define INTERFACE_MODE_SATA_3P0 BIT(2) +#define INTERFACE_MODE_PCIE BIT(0) + #define LOSD_MASK GENMASK(17, 14) #define LOSD_SHIFT 14 #define MEM_PLLDIV GENMASK(6, 5) -#define PCIEPHYRX_TRIM 0x0000001C -#define MEM_DLL_TRIM_SEL GENMASK(31, 30) +#define PIPE3_PHY_RX_TRIM 0x0000001C +#define MEM_DLL_TRIM_SEL_MASK GENMASK(31, 30) #define MEM_DLL_TRIM_SHIFT 30 -#define PCIEPHYRX_DLL 0x00000024 -#define MEM_DLL_PHINT_RATE GENMASK(31, 30) +#define PIPE3_PHY_RX_DLL 0x00000024 +#define MEM_DLL_PHINT_RATE_MASK GENMASK(31, 30) +#define MEM_DLL_PHINT_RATE_SHIFT 30 -#define PCIEPHYRX_DIGITAL_MODES 0x00000028 +#define PIPE3_PHY_RX_DIGITAL_MODES 0x00000028 +#define MEM_HS_RATE_MASK GENMASK(28, 27) +#define MEM_HS_RATE_SHIFT 27 +#define MEM_OVRD_HS_RATE BIT(26) +#define MEM_OVRD_HS_RATE_SHIFT 26 #define MEM_CDR_FASTLOCK BIT(23) -#define MEM_CDR_LBW GENMASK(22, 21) -#define MEM_CDR_STEPCNT GENMASK(20, 19) +#define MEM_CDR_FASTLOCK_SHIFT 23 +#define MEM_CDR_LBW_MASK GENMASK(22, 21) +#define MEM_CDR_LBW_SHIFT 21 +#define MEM_CDR_STEPCNT_MASK GENMASK(20, 19) +#define MEM_CDR_STEPCNT_SHIFT 19 #define MEM_CDR_STL_MASK GENMASK(18, 16) #define MEM_CDR_STL_SHIFT 16 #define MEM_CDR_THR_MASK GENMASK(15, 13) #define MEM_CDR_THR_SHIFT 13 #define MEM_CDR_THR_MODE BIT(12) -#define MEM_CDR_CDR_2NDO_SDM_MODE BIT(11) -#define MEM_OVRD_HS_RATE BIT(26) - -#define PCIEPHYRX_EQUALIZER 0x00000038 -#define MEM_EQLEV GENMASK(31, 16) -#define MEM_EQFTC GENMASK(15, 11) -#define MEM_EQCTL GENMASK(10, 7) +#define MEM_CDR_THR_MODE_SHIFT 12 +#define MEM_CDR_2NDO_SDM_MODE BIT(11) +#define MEM_CDR_2NDO_SDM_MODE_SHIFT 11 + +#define PIPE3_PHY_RX_EQUALIZER 0x00000038 +#define MEM_EQLEV_MASK GENMASK(31, 16) +#define MEM_EQLEV_SHIFT 16 +#define MEM_EQFTC_MASK GENMASK(15, 11) +#define MEM_EQFTC_SHIFT 11 +#define MEM_EQCTL_MASK GENMASK(10, 7) #define MEM_EQCTL_SHIFT 7 #define MEM_OVRD_EQLEV BIT(2) +#define MEM_OVRD_EQLEV_SHIFT 2 #define MEM_OVRD_EQFTC BIT(1) +#define MEM_OVRD_EQFTC_SHIFT 1 + +#define SATA_PHY_RX_IO_AND_A2D_OVERRIDES 0x44 +#define MEM_CDR_LOS_SOURCE_MASK GENMASK(10, 9) +#define MEM_CDR_LOS_SOURCE_SHIFT 9 /* * This is an Empirical value that works, need to confirm the actual @@ -110,6 +132,10 @@ #define PLL_IDLE_TIME 100 /* in milliseconds */ #define PLL_LOCK_TIME 100 /* in milliseconds */ +enum pipe3_mode { PIPE3_MODE_PCIE = 1, + PIPE3_MODE_SATA, + PIPE3_MODE_USBSS }; + struct pipe3_dpll_params { u16 m; u8 n; @@ -123,6 +149,27 @@ struct pipe3_dpll_map { struct pipe3_dpll_params params; }; +struct pipe3_settings { + u8 ana_interface; + u8 ana_losd; + u8 dig_fastlock; + u8 dig_lbw; + u8 dig_stepcnt; + u8 dig_stl; + u8 dig_thr; + u8 dig_thr_mode; + u8 dig_2ndo_sdm_mode; + u8 dig_hs_rate; + u8 dig_ovrd_hs_rate; + u8 dll_trim_sel; + u8 dll_phint_rate; + u8 eq_lev; + u8 eq_ftc; + u8 eq_ctl; + u8 eq_ovrd_lev; + u8 eq_ovrd_ftc; +}; + struct ti_pipe3 { void __iomem *pll_ctrl_base; void __iomem *phy_rx; @@ -141,6 +188,8 @@ struct ti_pipe3 { unsigned int power_reg; /* power reg. index within syscon */ unsigned int pcie_pcs_reg; /* pcs reg. index in syscon */ bool sata_refclk_enabled; + enum pipe3_mode mode; + struct pipe3_settings settings; }; static struct pipe3_dpll_map dpll_map_usb[] = { @@ -163,6 +212,89 @@ static struct pipe3_dpll_map dpll_map_sata[] = { { }, /* Terminator */ }; +struct pipe3_data { + enum pipe3_mode mode; + struct pipe3_dpll_map *dpll_map; + struct pipe3_settings settings; +}; + +static struct pipe3_data data_usb = { + .mode = PIPE3_MODE_USBSS, + .dpll_map = dpll_map_usb, + .settings = { + /* DRA75x TRM Table 26-17 Preferred USB3_PHY_RX SCP Register Settings */ + .ana_interface = INTERFACE_MODE_USBSS, + .ana_losd = 0xa, + .dig_fastlock = 1, + .dig_lbw = 3, + .dig_stepcnt = 0, + .dig_stl = 0x3, + .dig_thr = 1, + .dig_thr_mode = 1, + .dig_2ndo_sdm_mode = 0, + .dig_hs_rate = 0, + .dig_ovrd_hs_rate = 1, + .dll_trim_sel = 0x2, + .dll_phint_rate = 0x3, + .eq_lev = 0, + .eq_ftc = 0, + .eq_ctl = 0x9, + .eq_ovrd_lev = 0, + .eq_ovrd_ftc = 0, + }, +}; + +static struct pipe3_data data_sata = { + .mode = PIPE3_MODE_SATA, + .dpll_map = dpll_map_sata, + .settings = { + /* DRA75x TRM Table 26-9 Preferred SATA_PHY_RX SCP Register Settings */ + .ana_interface = INTERFACE_MODE_SATA_3P0, + .ana_losd = 0x5, + .dig_fastlock = 1, + .dig_lbw = 3, + .dig_stepcnt = 0, + .dig_stl = 0x3, + .dig_thr = 1, + .dig_thr_mode = 1, + .dig_2ndo_sdm_mode = 0, + .dig_hs_rate = 0, /* Not in TRM preferred settings */ + .dig_ovrd_hs_rate = 0, /* Not in TRM preferred settings */ + .dll_trim_sel = 0x1, + .dll_phint_rate = 0x2, /* for 1.5 GHz DPLL clock */ + .eq_lev = 0, + .eq_ftc = 0x1f, + .eq_ctl = 0, + .eq_ovrd_lev = 1, + .eq_ovrd_ftc = 1, + }, +}; + +static struct pipe3_data data_pcie = { + .mode = PIPE3_MODE_PCIE, + .settings = { + /* DRA75x TRM Table 26-62 Preferred PCIe_PHY_RX SCP Register Settings */ + .ana_interface = INTERFACE_MODE_PCIE, + .ana_losd = 0xa, + .dig_fastlock = 1, + .dig_lbw = 3, + .dig_stepcnt = 0, + .dig_stl = 0x3, + .dig_thr = 1, + .dig_thr_mode = 1, + .dig_2ndo_sdm_mode = 0, + .dig_hs_rate = 0, + .dig_ovrd_hs_rate = 0, + .dll_trim_sel = 0x2, + .dll_phint_rate = 0x3, + .eq_lev = 0, + .eq_ftc = 0x1f, + .eq_ctl = 1, + .eq_ovrd_lev = 0, + .eq_ovrd_ftc = 0, + }, +}; + static inline u32 ti_pipe3_readl(void __iomem *addr, unsigned offset) { return __raw_readl(addr + offset); @@ -196,7 +328,6 @@ static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy); static int ti_pipe3_power_off(struct phy *x) { - u32 val; int ret; struct ti_pipe3 *phy = phy_get_drvdata(x); @@ -205,13 +336,13 @@ static int ti_pipe3_power_off(struct phy *x) return 0; } - val = PIPE3_PHY_TX_RX_POWEROFF << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT; - ret = regmap_update_bits(phy->phy_power_syscon, phy->power_reg, - PIPE3_PHY_PWRCTL_CLK_CMD_MASK, val); + PIPE3_PHY_PWRCTL_CLK_CMD_MASK, 0); return ret; } +static void ti_pipe3_calibrate(struct ti_pipe3 *phy); + static int ti_pipe3_power_on(struct phy *x) { u32 val; @@ -219,6 +350,7 @@ static int ti_pipe3_power_on(struct phy *x) int ret; unsigned long rate; struct ti_pipe3 *phy = phy_get_drvdata(x); + bool rx_pending = false; if (!phy->phy_power_syscon) { omap_control_phy_power(phy->control_dev, 1); @@ -231,14 +363,35 @@ static int ti_pipe3_power_on(struct phy *x) return -EINVAL; } rate = rate / 1000000; - mask = OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK | - OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK; - val = PIPE3_PHY_TX_RX_POWERON << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT; - val |= rate << OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT; - + mask = OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK; + val = rate << OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT; ret = regmap_update_bits(phy->phy_power_syscon, phy->power_reg, mask, val); - return ret; + /* + * For PCIe, TX and RX must be powered on simultaneously. + * For USB and SATA, TX must be powered on before RX + */ + mask = OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK; + if (phy->mode == PIPE3_MODE_SATA || phy->mode == PIPE3_MODE_USBSS) { + val = PIPE3_PHY_TX_POWERON; + rx_pending = true; + } else { + val = PIPE3_PHY_TX_POWERON | PIPE3_PHY_RX_POWERON; + } + + regmap_update_bits(phy->phy_power_syscon, phy->power_reg, + mask, val); + + if (rx_pending) { + val = PIPE3_PHY_TX_POWERON | PIPE3_PHY_RX_POWERON; + regmap_update_bits(phy->phy_power_syscon, phy->power_reg, + mask, val); + } + + if (phy->mode == PIPE3_MODE_PCIE) + ti_pipe3_calibrate(phy); + + return 0; } static int ti_pipe3_dpll_wait_lock(struct ti_pipe3 *phy) @@ -300,32 +453,55 @@ static int ti_pipe3_dpll_program(struct ti_pipe3 *phy) static void ti_pipe3_calibrate(struct ti_pipe3 *phy) { u32 val; + struct pipe3_settings *s = &phy->settings; - val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_ANA_PROGRAMMABILITY); + val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_ANA_PROGRAMMABILITY); val &= ~(INTERFACE_MASK | LOSD_MASK | MEM_PLLDIV); - val = (0x1 << INTERFACE_SHIFT | 0xA << LOSD_SHIFT); - ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_ANA_PROGRAMMABILITY, val); - - val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_DIGITAL_MODES); - val &= ~(MEM_CDR_STEPCNT | MEM_CDR_STL_MASK | MEM_CDR_THR_MASK | - MEM_CDR_CDR_2NDO_SDM_MODE | MEM_OVRD_HS_RATE); - val |= (MEM_CDR_FASTLOCK | MEM_CDR_LBW | 0x3 << MEM_CDR_STL_SHIFT | - 0x1 << MEM_CDR_THR_SHIFT | MEM_CDR_THR_MODE); - ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_DIGITAL_MODES, val); - - val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_TRIM); - val &= ~MEM_DLL_TRIM_SEL; - val |= 0x2 << MEM_DLL_TRIM_SHIFT; - ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_TRIM, val); - - val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_DLL); - val |= MEM_DLL_PHINT_RATE; - ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_DLL, val); - - val = ti_pipe3_readl(phy->phy_rx, PCIEPHYRX_EQUALIZER); - val &= ~(MEM_EQLEV | MEM_EQCTL | MEM_OVRD_EQLEV | MEM_OVRD_EQFTC); - val |= MEM_EQFTC | 0x1 << MEM_EQCTL_SHIFT; - ti_pipe3_writel(phy->phy_rx, PCIEPHYRX_EQUALIZER, val); + val |= (s->ana_interface << INTERFACE_SHIFT | s->ana_losd << LOSD_SHIFT); + ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_ANA_PROGRAMMABILITY, val); + + val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_DIGITAL_MODES); + val &= ~(MEM_HS_RATE_MASK | MEM_OVRD_HS_RATE | MEM_CDR_FASTLOCK | + MEM_CDR_LBW_MASK | MEM_CDR_STEPCNT_MASK | MEM_CDR_STL_MASK | + MEM_CDR_THR_MASK | MEM_CDR_THR_MODE | MEM_CDR_2NDO_SDM_MODE); + val |= s->dig_hs_rate << MEM_HS_RATE_SHIFT | + s->dig_ovrd_hs_rate << MEM_OVRD_HS_RATE_SHIFT | + s->dig_fastlock << MEM_CDR_FASTLOCK_SHIFT | + s->dig_lbw << MEM_CDR_LBW_SHIFT | + s->dig_stepcnt << MEM_CDR_STEPCNT_SHIFT | + s->dig_stl << MEM_CDR_STL_SHIFT | + s->dig_thr << MEM_CDR_THR_SHIFT | + s->dig_thr_mode << MEM_CDR_THR_MODE_SHIFT | + s->dig_2ndo_sdm_mode << MEM_CDR_2NDO_SDM_MODE_SHIFT; + ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_DIGITAL_MODES, val); + + val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_TRIM); + val &= ~MEM_DLL_TRIM_SEL_MASK; + val |= s->dll_trim_sel << MEM_DLL_TRIM_SHIFT; + ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_TRIM, val); + + val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_DLL); + val &= ~MEM_DLL_PHINT_RATE_MASK; + val |= s->dll_phint_rate << MEM_DLL_PHINT_RATE_SHIFT; + ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_DLL, val); + + val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_EQUALIZER); + val &= ~(MEM_EQLEV_MASK | MEM_EQFTC_MASK | MEM_EQCTL_MASK | + MEM_OVRD_EQLEV | MEM_OVRD_EQFTC); + val |= s->eq_lev << MEM_EQLEV_SHIFT | + s->eq_ftc << MEM_EQFTC_SHIFT | + s->eq_ctl << MEM_EQCTL_SHIFT | + s->eq_ovrd_lev << MEM_OVRD_EQLEV_SHIFT | + s->eq_ovrd_ftc << MEM_OVRD_EQFTC_SHIFT; + ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_EQUALIZER, val); + + if (phy->mode == PIPE3_MODE_SATA) { + val = ti_pipe3_readl(phy->phy_rx, + SATA_PHY_RX_IO_AND_A2D_OVERRIDES); + val &= ~MEM_CDR_LOS_SOURCE_MASK; + ti_pipe3_writel(phy->phy_rx, SATA_PHY_RX_IO_AND_A2D_OVERRIDES, + val); + } } static int ti_pipe3_init(struct phy *x) @@ -340,7 +516,7 @@ static int ti_pipe3_init(struct phy *x) * as recommended in AM572x TRM SPRUHZ6, section 18.5.2.2, table * 18-1804. */ - if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) { + if (phy->mode == PIPE3_MODE_PCIE) { if (!phy->pcs_syscon) { omap_control_pcie_pcs(phy->control_dev, 0x96); return 0; @@ -349,12 +525,7 @@ static int ti_pipe3_init(struct phy *x) val = 0x96 << OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT; ret = regmap_update_bits(phy->pcs_syscon, phy->pcie_pcs_reg, PCIE_PCS_MASK, val); - if (ret) - return ret; - - ti_pipe3_calibrate(phy); - - return 0; + return ret; } /* Bring it out of IDLE if it is IDLE */ @@ -367,8 +538,7 @@ static int ti_pipe3_init(struct phy *x) /* SATA has issues if re-programmed when locked */ val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS); - if ((val & PLL_LOCK) && of_device_is_compatible(phy->dev->of_node, - "ti,phy-pipe3-sata")) + if ((val & PLL_LOCK) && phy->mode == PIPE3_MODE_SATA) return ret; /* Program the DPLL */ @@ -378,6 +548,8 @@ static int ti_pipe3_init(struct phy *x) return -EINVAL; } + ti_pipe3_calibrate(phy); + return ret; } @@ -390,12 +562,11 @@ static int ti_pipe3_exit(struct phy *x) /* If dpll_reset_syscon is not present we wont power down SATA DPLL * due to Errata i783 */ - if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata") && - !phy->dpll_reset_syscon) + if (phy->mode == PIPE3_MODE_SATA && !phy->dpll_reset_syscon) return 0; /* PCIe doesn't have internal DPLL */ - if (!of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-pcie")) { + if (phy->mode != PIPE3_MODE_PCIE) { /* Put DPLL in IDLE mode */ val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); val |= PLL_IDLE; @@ -418,7 +589,7 @@ static int ti_pipe3_exit(struct phy *x) } /* i783: SATA needs control bit toggle after PLL unlock */ - if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata")) { + if (phy->mode == PIPE3_MODE_SATA) { regmap_update_bits(phy->dpll_reset_syscon, phy->dpll_reset_reg, SATA_PLL_SOFT_RESET, SATA_PLL_SOFT_RESET); regmap_update_bits(phy->dpll_reset_syscon, phy->dpll_reset_reg, @@ -443,7 +614,6 @@ static int ti_pipe3_get_clk(struct ti_pipe3 *phy) { struct clk *clk; struct device *dev = phy->dev; - struct device_node *node = dev->of_node; phy->refclk = devm_clk_get(dev, "refclk"); if (IS_ERR(phy->refclk)) { @@ -451,11 +621,11 @@ static int ti_pipe3_get_clk(struct ti_pipe3 *phy) /* older DTBs have missing refclk in SATA PHY * so don't bail out in case of SATA PHY. */ - if (!of_device_is_compatible(node, "ti,phy-pipe3-sata")) + if (phy->mode != PIPE3_MODE_SATA) return PTR_ERR(phy->refclk); } - if (!of_device_is_compatible(node, "ti,phy-pipe3-sata")) { + if (phy->mode != PIPE3_MODE_SATA) { phy->wkupclk = devm_clk_get(dev, "wkupclk"); if (IS_ERR(phy->wkupclk)) { dev_err(dev, "unable to get wkupclk\n"); @@ -465,8 +635,7 @@ static int ti_pipe3_get_clk(struct ti_pipe3 *phy) phy->wkupclk = ERR_PTR(-ENODEV); } - if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie") || - phy->phy_power_syscon) { + if (phy->mode != PIPE3_MODE_PCIE || phy->phy_power_syscon) { phy->sys_clk = devm_clk_get(dev, "sysclk"); if (IS_ERR(phy->sys_clk)) { dev_err(dev, "unable to get sysclk\n"); @@ -474,7 +643,7 @@ static int ti_pipe3_get_clk(struct ti_pipe3 *phy) } } - if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) { + if (phy->mode == PIPE3_MODE_PCIE) { clk = devm_clk_get(dev, "dpll_ref"); if (IS_ERR(clk)) { dev_err(dev, "unable to get dpll ref clk\n"); @@ -546,7 +715,7 @@ static int ti_pipe3_get_sysctrl(struct ti_pipe3 *phy) phy->control_dev = &control_pdev->dev; } - if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) { + if (phy->mode == PIPE3_MODE_PCIE) { phy->pcs_syscon = syscon_regmap_lookup_by_phandle(node, "syscon-pcs"); if (IS_ERR(phy->pcs_syscon)) { @@ -564,7 +733,7 @@ static int ti_pipe3_get_sysctrl(struct ti_pipe3 *phy) } } - if (of_device_is_compatible(node, "ti,phy-pipe3-sata")) { + if (phy->mode == PIPE3_MODE_SATA) { phy->dpll_reset_syscon = syscon_regmap_lookup_by_phandle(node, "syscon-pllreset"); if (IS_ERR(phy->dpll_reset_syscon)) { @@ -589,12 +758,8 @@ static int ti_pipe3_get_tx_rx_base(struct ti_pipe3 *phy) { struct resource *res; struct device *dev = phy->dev; - struct device_node *node = dev->of_node; struct platform_device *pdev = to_platform_device(dev); - if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) - return 0; - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_rx"); phy->phy_rx = devm_ioremap_resource(dev, res); @@ -611,24 +776,12 @@ static int ti_pipe3_get_tx_rx_base(struct ti_pipe3 *phy) static int ti_pipe3_get_pll_base(struct ti_pipe3 *phy) { struct resource *res; - const struct of_device_id *match; struct device *dev = phy->dev; - struct device_node *node = dev->of_node; struct platform_device *pdev = to_platform_device(dev); - if (of_device_is_compatible(node, "ti,phy-pipe3-pcie")) + if (phy->mode == PIPE3_MODE_PCIE) return 0; - match = of_match_device(ti_pipe3_id_table, dev); - if (!match) - return -EINVAL; - - phy->dpll_map = (struct pipe3_dpll_map *)match->data; - if (!phy->dpll_map) { - dev_err(dev, "no DPLL data\n"); - return -EINVAL; - } - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pll_ctrl"); phy->pll_ctrl_base = devm_ioremap_resource(dev, res); @@ -640,15 +793,29 @@ static int ti_pipe3_probe(struct platform_device *pdev) struct ti_pipe3 *phy; struct phy *generic_phy; struct phy_provider *phy_provider; - struct device_node *node = pdev->dev.of_node; struct device *dev = &pdev->dev; int ret; + const struct of_device_id *match; + struct pipe3_data *data; phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); if (!phy) return -ENOMEM; - phy->dev = dev; + match = of_match_device(ti_pipe3_id_table, dev); + if (!match) + return -EINVAL; + + data = (struct pipe3_data *)match->data; + if (!data) { + dev_err(dev, "no driver data\n"); + return -EINVAL; + } + + phy->dev = dev; + phy->mode = data->mode; + phy->dpll_map = data->dpll_map; + phy->settings = data->settings; ret = ti_pipe3_get_pll_base(phy); if (ret) @@ -672,7 +839,7 @@ static int ti_pipe3_probe(struct platform_device *pdev) /* * Prevent auto-disable of refclk for SATA PHY due to Errata i783 */ - if (of_device_is_compatible(node, "ti,phy-pipe3-sata")) { + if (phy->mode == PIPE3_MODE_SATA) { if (!IS_ERR(phy->refclk)) { clk_prepare_enable(phy->refclk); phy->sata_refclk_enabled = true; @@ -762,18 +929,19 @@ static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy) static const struct of_device_id ti_pipe3_id_table[] = { { .compatible = "ti,phy-usb3", - .data = dpll_map_usb, + .data = &data_usb, }, { .compatible = "ti,omap-usb3", - .data = dpll_map_usb, + .data = &data_usb, }, { .compatible = "ti,phy-pipe3-sata", - .data = dpll_map_sata, + .data = &data_sata, }, { .compatible = "ti,phy-pipe3-pcie", + .data = &data_pcie, }, {} }; |