diff options
Diffstat (limited to 'drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c')
-rw-r--r-- | drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c | 123 |
1 files changed, 89 insertions, 34 deletions
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c index 3ee6767392b6..3014beef4873 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c @@ -79,6 +79,7 @@ /* NVM offsets (in words) definitions */ enum wkp_nvm_offsets { /* NVM HW-Section offset (in words) definitions */ + SUBSYSTEM_ID = 0x0A, HW_ADDR = 0x15, /* NVM SW-Section offset (in words) definitions */ @@ -183,22 +184,26 @@ static struct ieee80211_rate iwl_cfg80211_rates[] = { * @NVM_CHANNEL_INDOOR_ONLY: only indoor use is allowed * @NVM_CHANNEL_GO_CONCURRENT: GO operation is allowed when connected to BSS * on same channel on 2.4 or same UNII band on 5.2 - * @NVM_CHANNEL_WIDE: 20 MHz channel okay (?) - * @NVM_CHANNEL_40MHZ: 40 MHz channel okay (?) - * @NVM_CHANNEL_80MHZ: 80 MHz channel okay (?) - * @NVM_CHANNEL_160MHZ: 160 MHz channel okay (?) + * @NVM_CHANNEL_UNIFORM: uniform spreading required + * @NVM_CHANNEL_20MHZ: 20 MHz channel okay + * @NVM_CHANNEL_40MHZ: 40 MHz channel okay + * @NVM_CHANNEL_80MHZ: 80 MHz channel okay + * @NVM_CHANNEL_160MHZ: 160 MHz channel okay + * @NVM_CHANNEL_DC_HIGH: DC HIGH required/allowed (?) */ enum iwl_nvm_channel_flags { - NVM_CHANNEL_VALID = BIT(0), - NVM_CHANNEL_IBSS = BIT(1), - NVM_CHANNEL_ACTIVE = BIT(3), - NVM_CHANNEL_RADAR = BIT(4), - NVM_CHANNEL_INDOOR_ONLY = BIT(5), - NVM_CHANNEL_GO_CONCURRENT = BIT(6), - NVM_CHANNEL_WIDE = BIT(8), - NVM_CHANNEL_40MHZ = BIT(9), - NVM_CHANNEL_80MHZ = BIT(10), - NVM_CHANNEL_160MHZ = BIT(11), + NVM_CHANNEL_VALID = BIT(0), + NVM_CHANNEL_IBSS = BIT(1), + NVM_CHANNEL_ACTIVE = BIT(3), + NVM_CHANNEL_RADAR = BIT(4), + NVM_CHANNEL_INDOOR_ONLY = BIT(5), + NVM_CHANNEL_GO_CONCURRENT = BIT(6), + NVM_CHANNEL_UNIFORM = BIT(7), + NVM_CHANNEL_20MHZ = BIT(8), + NVM_CHANNEL_40MHZ = BIT(9), + NVM_CHANNEL_80MHZ = BIT(10), + NVM_CHANNEL_160MHZ = BIT(11), + NVM_CHANNEL_DC_HIGH = BIT(12), }; #define CHECK_AND_PRINT_I(x) \ @@ -254,13 +259,12 @@ static u32 iwl_get_channel_flags(u8 ch_num, int ch_idx, bool is_5ghz, static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg, struct iwl_nvm_data *data, const __le16 * const nvm_ch_flags, - bool lar_supported) + bool lar_supported, bool no_wide_in_5ghz) { int ch_idx; int n_channels = 0; struct ieee80211_channel *channel; u16 ch_flags; - bool is_5ghz; int num_of_ch, num_2ghz_channels; const u8 *nvm_chan; @@ -275,12 +279,20 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg, } for (ch_idx = 0; ch_idx < num_of_ch; ch_idx++) { + bool is_5ghz = (ch_idx >= num_2ghz_channels); + ch_flags = __le16_to_cpup(nvm_ch_flags + ch_idx); - if (ch_idx >= num_2ghz_channels && - !data->sku_cap_band_52GHz_enable) + if (is_5ghz && !data->sku_cap_band_52GHz_enable) continue; + /* workaround to disable wide channels in 5GHz */ + if (no_wide_in_5ghz && is_5ghz) { + ch_flags &= ~(NVM_CHANNEL_40MHZ | + NVM_CHANNEL_80MHZ | + NVM_CHANNEL_160MHZ); + } + if (ch_flags & NVM_CHANNEL_160MHZ) data->vht160_supported = true; @@ -303,8 +315,8 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg, n_channels++; channel->hw_value = nvm_chan[ch_idx]; - channel->band = (ch_idx < num_2ghz_channels) ? - NL80211_BAND_2GHZ : NL80211_BAND_5GHZ; + channel->band = is_5ghz ? + NL80211_BAND_5GHZ : NL80211_BAND_2GHZ; channel->center_freq = ieee80211_channel_to_frequency( channel->hw_value, channel->band); @@ -316,7 +328,6 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg, * is not used in mvm, and is used for backwards compatibility */ channel->max_power = IWL_DEFAULT_MAX_TX_POWER; - is_5ghz = channel->band == NL80211_BAND_5GHZ; /* don't put limitations in case we're using LAR */ if (!lar_supported) @@ -327,7 +338,7 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg, channel->flags = 0; IWL_DEBUG_EEPROM(dev, - "Ch. %d [%sGHz] flags 0x%x %s%s%s%s%s%s%s%s%s%s(%ddBm): Ad-Hoc %ssupported\n", + "Ch. %d [%sGHz] flags 0x%x %s%s%s%s%s%s%s%s%s%s%s%s(%ddBm): Ad-Hoc %ssupported\n", channel->hw_value, is_5ghz ? "5.2" : "2.4", ch_flags, @@ -337,10 +348,12 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg, CHECK_AND_PRINT_I(RADAR), CHECK_AND_PRINT_I(INDOOR_ONLY), CHECK_AND_PRINT_I(GO_CONCURRENT), - CHECK_AND_PRINT_I(WIDE), + CHECK_AND_PRINT_I(UNIFORM), + CHECK_AND_PRINT_I(20MHZ), CHECK_AND_PRINT_I(40MHZ), CHECK_AND_PRINT_I(80MHZ), CHECK_AND_PRINT_I(160MHZ), + CHECK_AND_PRINT_I(DC_HIGH), channel->max_power, ((ch_flags & NVM_CHANNEL_IBSS) && !(ch_flags & NVM_CHANNEL_RADAR)) @@ -432,14 +445,15 @@ static void iwl_init_vht_hw_capab(const struct iwl_cfg *cfg, void iwl_init_sbands(struct device *dev, const struct iwl_cfg *cfg, struct iwl_nvm_data *data, const __le16 *nvm_ch_flags, - u8 tx_chains, u8 rx_chains, bool lar_supported) + u8 tx_chains, u8 rx_chains, bool lar_supported, + bool no_wide_in_5ghz) { int n_channels; int n_used = 0; struct ieee80211_supported_band *sband; n_channels = iwl_init_channel_map(dev, cfg, data, nvm_ch_flags, - lar_supported); + lar_supported, no_wide_in_5ghz); sband = &data->bands[NL80211_BAND_2GHZ]; sband->band = NL80211_BAND_2GHZ; sband->bitrates = &iwl_cfg80211_rates[RATES_24_OFFS]; @@ -568,7 +582,7 @@ static void iwl_set_hw_address_family_8000(struct iwl_trans *trans, const struct iwl_cfg *cfg, struct iwl_nvm_data *data, const __le16 *mac_override, - const __le16 *nvm_hw) + const __be16 *nvm_hw) { const u8 *hw_addr; @@ -615,7 +629,7 @@ static void iwl_set_hw_address_family_8000(struct iwl_trans *trans, static int iwl_set_hw_address(struct iwl_trans *trans, const struct iwl_cfg *cfg, - struct iwl_nvm_data *data, const __le16 *nvm_hw, + struct iwl_nvm_data *data, const __be16 *nvm_hw, const __le16 *mac_override) { if (cfg->mac_addr_from_csr) { @@ -645,9 +659,41 @@ static int iwl_set_hw_address(struct iwl_trans *trans, return 0; } +static bool +iwl_nvm_no_wide_in_5ghz(struct device *dev, const struct iwl_cfg *cfg, + const __be16 *nvm_hw) +{ + /* + * Workaround a bug in Indonesia SKUs where the regulatory in + * some 7000-family OTPs erroneously allow wide channels in + * 5GHz. To check for Indonesia, we take the SKU value from + * bits 1-4 in the subsystem ID and check if it is either 5 or + * 9. In those cases, we need to force-disable wide channels + * in 5GHz otherwise the FW will throw a sysassert when we try + * to use them. + */ + if (cfg->device_family == IWL_DEVICE_FAMILY_7000) { + /* + * Unlike the other sections in the NVM, the hw + * section uses big-endian. + */ + u16 subsystem_id = be16_to_cpup(nvm_hw + SUBSYSTEM_ID); + u8 sku = (subsystem_id & 0x1e) >> 1; + + if (sku == 5 || sku == 9) { + IWL_DEBUG_EEPROM(dev, + "disabling wide channels in 5GHz (0x%0x %d)\n", + subsystem_id, sku); + return true; + } + } + + return false; +} + struct iwl_nvm_data * iwl_parse_nvm_data(struct iwl_trans *trans, const struct iwl_cfg *cfg, - const __le16 *nvm_hw, const __le16 *nvm_sw, + const __be16 *nvm_hw, const __le16 *nvm_sw, const __le16 *nvm_calib, const __le16 *regulatory, const __le16 *mac_override, const __le16 *phy_sku, u8 tx_chains, u8 rx_chains, bool lar_fw_supported) @@ -655,6 +701,7 @@ iwl_parse_nvm_data(struct iwl_trans *trans, const struct iwl_cfg *cfg, struct device *dev = trans->dev; struct iwl_nvm_data *data; bool lar_enabled; + bool no_wide_in_5ghz = iwl_nvm_no_wide_in_5ghz(dev, cfg, nvm_hw); u32 sku, radio_cfg; u16 lar_config; const __le16 *ch_section; @@ -725,7 +772,7 @@ iwl_parse_nvm_data(struct iwl_trans *trans, const struct iwl_cfg *cfg, } iwl_init_sbands(dev, cfg, data, ch_section, tx_chains, rx_chains, - lar_fw_supported && lar_enabled); + lar_fw_supported && lar_enabled, no_wide_in_5ghz); data->calib_version = 255; return data; @@ -868,19 +915,27 @@ iwl_parse_nvm_mcc_info(struct device *dev, const struct iwl_cfg *cfg, prev_reg_rule_flags = reg_rule_flags; IWL_DEBUG_DEV(dev, IWL_DL_LAR, - "Ch. %d [%sGHz] %s%s%s%s%s%s%s%s%s(0x%02x) reg_flags 0x%x: %s\n", + "Ch. %d [%sGHz] %s%s%s%s%s%s%s%s%s%s%s%s(0x%02x)\n", center_freq, band == NL80211_BAND_5GHZ ? "5.2" : "2.4", CHECK_AND_PRINT_I(VALID), + CHECK_AND_PRINT_I(IBSS), CHECK_AND_PRINT_I(ACTIVE), CHECK_AND_PRINT_I(RADAR), - CHECK_AND_PRINT_I(WIDE), + CHECK_AND_PRINT_I(INDOOR_ONLY), + CHECK_AND_PRINT_I(GO_CONCURRENT), + CHECK_AND_PRINT_I(UNIFORM), + CHECK_AND_PRINT_I(20MHZ), CHECK_AND_PRINT_I(40MHZ), CHECK_AND_PRINT_I(80MHZ), CHECK_AND_PRINT_I(160MHZ), - CHECK_AND_PRINT_I(INDOOR_ONLY), - CHECK_AND_PRINT_I(GO_CONCURRENT), - ch_flags, reg_rule_flags, + CHECK_AND_PRINT_I(DC_HIGH), + ch_flags); + IWL_DEBUG_DEV(dev, IWL_DL_LAR, + "Ch. %d [%sGHz] reg_flags 0x%x: %s\n", + center_freq, + band == NL80211_BAND_5GHZ ? "5.2" : "2.4", + reg_rule_flags, ((ch_flags & NVM_CHANNEL_ACTIVE) && !(ch_flags & NVM_CHANNEL_RADAR)) ? "Ad-Hoc" : ""); |