diff options
Diffstat (limited to 'drivers/net/wireless/intel/iwlwifi/dvm/eeprom.c')
| -rw-r--r-- | drivers/net/wireless/intel/iwlwifi/dvm/eeprom.c | 1150 |
1 files changed, 1150 insertions, 0 deletions
diff --git a/drivers/net/wireless/intel/iwlwifi/dvm/eeprom.c b/drivers/net/wireless/intel/iwlwifi/dvm/eeprom.c new file mode 100644 index 000000000000..931aa3f5798d --- /dev/null +++ b/drivers/net/wireless/intel/iwlwifi/dvm/eeprom.c @@ -0,0 +1,1150 @@ +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause +/* + * Copyright (C) 2005-2014, 2018-2019, 2021, 2024 Intel Corporation + */ +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/export.h> + +#include "iwl-drv.h" +#include "iwl-debug.h" +#include "iwl-io.h" +#include "iwl-prph.h" +#include "iwl-csr.h" +#include "agn.h" + +/* EEPROM offset definitions */ + +/* indirect access definitions */ +#define ADDRESS_MSK 0x0000FFFF +#define INDIRECT_TYPE_MSK 0x000F0000 +#define INDIRECT_HOST 0x00010000 +#define INDIRECT_GENERAL 0x00020000 +#define INDIRECT_REGULATORY 0x00030000 +#define INDIRECT_CALIBRATION 0x00040000 +#define INDIRECT_PROCESS_ADJST 0x00050000 +#define INDIRECT_OTHERS 0x00060000 +#define INDIRECT_TXP_LIMIT 0x00070000 +#define INDIRECT_TXP_LIMIT_SIZE 0x00080000 +#define INDIRECT_ADDRESS 0x00100000 + +/* corresponding link offsets in EEPROM */ +#define EEPROM_LINK_HOST (2*0x64) +#define EEPROM_LINK_GENERAL (2*0x65) +#define EEPROM_LINK_REGULATORY (2*0x66) +#define EEPROM_LINK_CALIBRATION (2*0x67) +#define EEPROM_LINK_PROCESS_ADJST (2*0x68) +#define EEPROM_LINK_OTHERS (2*0x69) +#define EEPROM_LINK_TXP_LIMIT (2*0x6a) +#define EEPROM_LINK_TXP_LIMIT_SIZE (2*0x6b) + +/* General */ +#define EEPROM_DEVICE_ID (2*0x08) /* 2 bytes */ +#define EEPROM_SUBSYSTEM_ID (2*0x0A) /* 2 bytes */ +#define EEPROM_MAC_ADDRESS (2*0x15) /* 6 bytes */ +#define EEPROM_BOARD_REVISION (2*0x35) /* 2 bytes */ +#define EEPROM_BOARD_PBA_NUMBER (2*0x3B+1) /* 9 bytes */ +#define EEPROM_VERSION (2*0x44) /* 2 bytes */ +#define EEPROM_SKU_CAP (2*0x45) /* 2 bytes */ +#define EEPROM_OEM_MODE (2*0x46) /* 2 bytes */ +#define EEPROM_RADIO_CONFIG (2*0x48) /* 2 bytes */ +#define EEPROM_NUM_MAC_ADDRESS (2*0x4C) /* 2 bytes */ + +/* calibration */ +struct iwl_eeprom_calib_hdr { + u8 version; + u8 pa_type; + __le16 voltage; +} __packed; + +#define EEPROM_CALIB_ALL (INDIRECT_ADDRESS | INDIRECT_CALIBRATION) +#define EEPROM_XTAL ((2*0x128) | EEPROM_CALIB_ALL) + +/* temperature */ +#define EEPROM_KELVIN_TEMPERATURE ((2*0x12A) | EEPROM_CALIB_ALL) +#define EEPROM_RAW_TEMPERATURE ((2*0x12B) | EEPROM_CALIB_ALL) + +/* SKU Capabilities (actual values from EEPROM definition) */ +enum eeprom_sku_bits { + EEPROM_SKU_CAP_BAND_24GHZ = BIT(4), + EEPROM_SKU_CAP_BAND_52GHZ = BIT(5), + EEPROM_SKU_CAP_11N_ENABLE = BIT(6), + EEPROM_SKU_CAP_AMT_ENABLE = BIT(7), + EEPROM_SKU_CAP_IPAN_ENABLE = BIT(8) +}; + +/* radio config bits (actual values from EEPROM definition) */ +#define EEPROM_RF_CFG_TYPE_MSK(x) (x & 0x3) /* bits 0-1 */ +#define EEPROM_RF_CFG_STEP_MSK(x) ((x >> 2) & 0x3) /* bits 2-3 */ +#define EEPROM_RF_CFG_DASH_MSK(x) ((x >> 4) & 0x3) /* bits 4-5 */ +#define EEPROM_RF_CFG_PNUM_MSK(x) ((x >> 6) & 0x3) /* bits 6-7 */ +#define EEPROM_RF_CFG_TX_ANT_MSK(x) ((x >> 8) & 0xF) /* bits 8-11 */ +#define EEPROM_RF_CFG_RX_ANT_MSK(x) ((x >> 12) & 0xF) /* bits 12-15 */ + +/* + * EEPROM bands + * These are the channel numbers from each band in the order + * that they are stored in the EEPROM band information. Note + * that EEPROM bands aren't the same as mac80211 bands, and + * there are even special "ht40 bands" in the EEPROM. + */ +static const u8 iwl_eeprom_band_1[14] = { /* 2.4 GHz */ + 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 +}; + +static const u8 iwl_eeprom_band_2[] = { /* 4915-5080MHz */ + 183, 184, 185, 187, 188, 189, 192, 196, 7, 8, 11, 12, 16 +}; + +static const u8 iwl_eeprom_band_3[] = { /* 5170-5320MHz */ + 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64 +}; + +static const u8 iwl_eeprom_band_4[] = { /* 5500-5700MHz */ + 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 +}; + +static const u8 iwl_eeprom_band_5[] = { /* 5725-5825MHz */ + 145, 149, 153, 157, 161, 165 +}; + +static const u8 iwl_eeprom_band_6[] = { /* 2.4 ht40 channel */ + 1, 2, 3, 4, 5, 6, 7 +}; + +static const u8 iwl_eeprom_band_7[] = { /* 5.2 ht40 channel */ + 36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157 +}; + +#define IWL_NUM_CHANNELS (ARRAY_SIZE(iwl_eeprom_band_1) + \ + ARRAY_SIZE(iwl_eeprom_band_2) + \ + ARRAY_SIZE(iwl_eeprom_band_3) + \ + ARRAY_SIZE(iwl_eeprom_band_4) + \ + ARRAY_SIZE(iwl_eeprom_band_5)) + +/* rate data (static) */ +static struct ieee80211_rate iwl_cfg80211_rates[] = { + { .bitrate = 1 * 10, .hw_value = 0, .hw_value_short = 0, }, + { .bitrate = 2 * 10, .hw_value = 1, .hw_value_short = 1, + .flags = IEEE80211_RATE_SHORT_PREAMBLE, }, + { .bitrate = 5.5 * 10, .hw_value = 2, .hw_value_short = 2, + .flags = IEEE80211_RATE_SHORT_PREAMBLE, }, + { .bitrate = 11 * 10, .hw_value = 3, .hw_value_short = 3, + .flags = IEEE80211_RATE_SHORT_PREAMBLE, }, + { .bitrate = 6 * 10, .hw_value = 4, .hw_value_short = 4, }, + { .bitrate = 9 * 10, .hw_value = 5, .hw_value_short = 5, }, + { .bitrate = 12 * 10, .hw_value = 6, .hw_value_short = 6, }, + { .bitrate = 18 * 10, .hw_value = 7, .hw_value_short = 7, }, + { .bitrate = 24 * 10, .hw_value = 8, .hw_value_short = 8, }, + { .bitrate = 36 * 10, .hw_value = 9, .hw_value_short = 9, }, + { .bitrate = 48 * 10, .hw_value = 10, .hw_value_short = 10, }, + { .bitrate = 54 * 10, .hw_value = 11, .hw_value_short = 11, }, +}; +#define RATES_24_OFFS 0 +#define N_RATES_24 ARRAY_SIZE(iwl_cfg80211_rates) +#define RATES_52_OFFS 4 +#define N_RATES_52 (N_RATES_24 - RATES_52_OFFS) + +/* EEPROM reading functions */ + +static u16 iwl_eeprom_query16(const u8 *eeprom, size_t eeprom_size, int offset) +{ + if (WARN_ON(offset + sizeof(u16) > eeprom_size)) + return 0; + return le16_to_cpup((__le16 *)(eeprom + offset)); +} + +static u32 eeprom_indirect_address(const u8 *eeprom, size_t eeprom_size, + u32 address) +{ + u16 offset = 0; + + if ((address & INDIRECT_ADDRESS) == 0) + return address; + + switch (address & INDIRECT_TYPE_MSK) { + case INDIRECT_HOST: + offset = iwl_eeprom_query16(eeprom, eeprom_size, + EEPROM_LINK_HOST); + break; + case INDIRECT_GENERAL: + offset = iwl_eeprom_query16(eeprom, eeprom_size, + EEPROM_LINK_GENERAL); + break; + case INDIRECT_REGULATORY: + offset = iwl_eeprom_query16(eeprom, eeprom_size, + EEPROM_LINK_REGULATORY); + break; + case INDIRECT_TXP_LIMIT: + offset = iwl_eeprom_query16(eeprom, eeprom_size, + EEPROM_LINK_TXP_LIMIT); + break; + case INDIRECT_TXP_LIMIT_SIZE: + offset = iwl_eeprom_query16(eeprom, eeprom_size, + EEPROM_LINK_TXP_LIMIT_SIZE); + break; + case INDIRECT_CALIBRATION: + offset = iwl_eeprom_query16(eeprom, eeprom_size, + EEPROM_LINK_CALIBRATION); + break; + case INDIRECT_PROCESS_ADJST: + offset = iwl_eeprom_query16(eeprom, eeprom_size, + EEPROM_LINK_PROCESS_ADJST); + break; + case INDIRECT_OTHERS: + offset = iwl_eeprom_query16(eeprom, eeprom_size, + EEPROM_LINK_OTHERS); + break; + default: + WARN_ON(1); + break; + } + + /* translate the offset from words to byte */ + return (address & ADDRESS_MSK) + (offset << 1); +} + +static const u8 *iwl_eeprom_query_addr(const u8 *eeprom, size_t eeprom_size, + u32 offset) +{ + u32 address = eeprom_indirect_address(eeprom, eeprom_size, offset); + + if (WARN_ON(address >= eeprom_size)) + return NULL; + + return &eeprom[address]; +} + +static int iwl_eeprom_read_calib(const u8 *eeprom, size_t eeprom_size, + struct iwl_nvm_data *data) +{ + struct iwl_eeprom_calib_hdr *hdr; + + hdr = (void *)iwl_eeprom_query_addr(eeprom, eeprom_size, + EEPROM_CALIB_ALL); + if (!hdr) + return -ENODATA; + data->calib_version = hdr->version; + data->calib_voltage = hdr->voltage; + + return 0; +} + +/** + * enum iwl_eeprom_channel_flags - channel flags in EEPROM + * @EEPROM_CHANNEL_VALID: channel is usable for this SKU/geo + * @EEPROM_CHANNEL_IBSS: usable as an IBSS channel + * @EEPROM_CHANNEL_ACTIVE: active scanning allowed + * @EEPROM_CHANNEL_RADAR: radar detection required + * @EEPROM_CHANNEL_WIDE: 20 MHz channel okay (?) + * @EEPROM_CHANNEL_DFS: dynamic freq selection candidate + */ +enum iwl_eeprom_channel_flags { + EEPROM_CHANNEL_VALID = BIT(0), + EEPROM_CHANNEL_IBSS = BIT(1), + EEPROM_CHANNEL_ACTIVE = BIT(3), + EEPROM_CHANNEL_RADAR = BIT(4), + EEPROM_CHANNEL_WIDE = BIT(5), + EEPROM_CHANNEL_DFS = BIT(7), +}; + +/** + * struct iwl_eeprom_channel - EEPROM channel data + * @flags: %EEPROM_CHANNEL_* flags + * @max_power_avg: max power (in dBm) on this channel, at most 31 dBm + */ +struct iwl_eeprom_channel { + u8 flags; + s8 max_power_avg; +} __packed; + +enum iwl_eeprom_enhanced_txpwr_flags { + IWL_EEPROM_ENH_TXP_FL_VALID = BIT(0), + IWL_EEPROM_ENH_TXP_FL_BAND_52G = BIT(1), + IWL_EEPROM_ENH_TXP_FL_OFDM = BIT(2), + IWL_EEPROM_ENH_TXP_FL_40MHZ = BIT(3), + IWL_EEPROM_ENH_TXP_FL_HT_AP = BIT(4), + IWL_EEPROM_ENH_TXP_FL_RES1 = BIT(5), + IWL_EEPROM_ENH_TXP_FL_RES2 = BIT(6), + IWL_EEPROM_ENH_TXP_FL_COMMON_TYPE = BIT(7), +}; + +/** + * struct iwl_eeprom_enhanced_txpwr - enhanced regulatory TX power limits + * @flags: entry flags + * @channel: channel number + * @chain_a_max: chain a max power in 1/2 dBm + * @chain_b_max: chain b max power in 1/2 dBm + * @chain_c_max: chain c max power in 1/2 dBm + * @delta_20_in_40: 20-in-40 deltas (hi/lo) + * @mimo2_max: mimo2 max power in 1/2 dBm + * @mimo3_max: mimo3 max power in 1/2 dBm + * + * This structure presents the enhanced regulatory tx power limit layout + * in an EEPROM image. + */ +struct iwl_eeprom_enhanced_txpwr { + u8 flags; + u8 channel; + s8 chain_a_max; + s8 chain_b_max; + s8 chain_c_max; + u8 delta_20_in_40; + s8 mimo2_max; + s8 mimo3_max; +} __packed; + +static s8 iwl_get_max_txpwr_half_dbm(const struct iwl_nvm_data *data, + struct iwl_eeprom_enhanced_txpwr *txp) +{ + s8 result = 0; /* (.5 dBm) */ + + /* Take the highest tx power from any valid chains */ + if (data->valid_tx_ant & ANT_A && txp->chain_a_max > result) + result = txp->chain_a_max; + + if (data->valid_tx_ant & ANT_B && txp->chain_b_max > result) + result = txp->chain_b_max; + + if (data->valid_tx_ant & ANT_C && txp->chain_c_max > result) + result = txp->chain_c_max; + + if ((data->valid_tx_ant == ANT_AB || + data->valid_tx_ant == ANT_BC || + data->valid_tx_ant == ANT_AC) && txp->mimo2_max > result) + result = txp->mimo2_max; + + if (data->valid_tx_ant == ANT_ABC && txp->mimo3_max > result) + result = txp->mimo3_max; + + return result; +} + +#define EEPROM_TXP_OFFS (0x00 | INDIRECT_ADDRESS | INDIRECT_TXP_LIMIT) +#define EEPROM_TXP_ENTRY_LEN sizeof(struct iwl_eeprom_enhanced_txpwr) +#define EEPROM_TXP_SZ_OFFS (0x00 | INDIRECT_ADDRESS | INDIRECT_TXP_LIMIT_SIZE) + +#define TXP_CHECK_AND_PRINT(x) \ + ((txp->flags & IWL_EEPROM_ENH_TXP_FL_##x) ? # x " " : "") + +static void +iwl_eeprom_enh_txp_read_element(struct iwl_nvm_data *data, + struct iwl_eeprom_enhanced_txpwr *txp, + int n_channels, s8 max_txpower_avg) +{ + int ch_idx; + enum nl80211_band band; + + band = txp->flags & IWL_EEPROM_ENH_TXP_FL_BAND_52G ? + NL80211_BAND_5GHZ : NL80211_BAND_2GHZ; + + for (ch_idx = 0; ch_idx < n_channels; ch_idx++) { + struct ieee80211_channel *chan = &data->channels[ch_idx]; + + /* update matching channel or from common data only */ + if (txp->channel != 0 && chan->hw_value != txp->channel) + continue; + + /* update matching band only */ + if (band != chan->band) + continue; + + if (chan->max_power < max_txpower_avg && + !(txp->flags & IWL_EEPROM_ENH_TXP_FL_40MHZ)) + chan->max_power = max_txpower_avg; + } +} + +static void iwl_eeprom_enhanced_txpower(struct device *dev, + struct iwl_nvm_data *data, + const u8 *eeprom, size_t eeprom_size, + int n_channels) +{ + struct iwl_eeprom_enhanced_txpwr *txp_array, *txp; + int idx, entries; + __le16 *txp_len; + s8 max_txp_avg_halfdbm; + + BUILD_BUG_ON(sizeof(struct iwl_eeprom_enhanced_txpwr) != 8); + + /* the length is in 16-bit words, but we want entries */ + txp_len = (__le16 *)iwl_eeprom_query_addr(eeprom, eeprom_size, + EEPROM_TXP_SZ_OFFS); + entries = le16_to_cpup(txp_len) * 2 / EEPROM_TXP_ENTRY_LEN; + + txp_array = (void *)iwl_eeprom_query_addr(eeprom, eeprom_size, + EEPROM_TXP_OFFS); + + for (idx = 0; idx < entries; idx++) { + txp = &txp_array[idx]; + /* skip invalid entries */ + if (!(txp->flags & IWL_EEPROM_ENH_TXP_FL_VALID)) + continue; + + IWL_DEBUG_EEPROM(dev, "%s %d:\t %s%s%s%s%s%s%s%s (0x%02x)\n", + (txp->channel && (txp->flags & + IWL_EEPROM_ENH_TXP_FL_COMMON_TYPE)) ? + "Common " : (txp->channel) ? + "Channel" : "Common", + (txp->channel), + TXP_CHECK_AND_PRINT(VALID), + TXP_CHECK_AND_PRINT(BAND_52G), + TXP_CHECK_AND_PRINT(OFDM), + TXP_CHECK_AND_PRINT(40MHZ), + TXP_CHECK_AND_PRINT(HT_AP), + TXP_CHECK_AND_PRINT(RES1), + TXP_CHECK_AND_PRINT(RES2), + TXP_CHECK_AND_PRINT(COMMON_TYPE), + txp->flags); + IWL_DEBUG_EEPROM(dev, + "\t\t chain_A: %d chain_B: %d chain_C: %d\n", + txp->chain_a_max, txp->chain_b_max, + txp->chain_c_max); + IWL_DEBUG_EEPROM(dev, + "\t\t MIMO2: %d MIMO3: %d High 20_on_40: 0x%02x Low 20_on_40: 0x%02x\n", + txp->mimo2_max, txp->mimo3_max, + ((txp->delta_20_in_40 & 0xf0) >> 4), + (txp->delta_20_in_40 & 0x0f)); + + max_txp_avg_halfdbm = iwl_get_max_txpwr_half_dbm(data, txp); + + iwl_eeprom_enh_txp_read_element(data, txp, n_channels, + DIV_ROUND_UP(max_txp_avg_halfdbm, 2)); + + if (max_txp_avg_halfdbm > data->max_tx_pwr_half_dbm) + data->max_tx_pwr_half_dbm = max_txp_avg_halfdbm; + } +} + +static void iwl_init_band_reference(const struct iwl_cfg *cfg, + const u8 *eeprom, size_t eeprom_size, + int eeprom_band, int *eeprom_ch_count, + const struct iwl_eeprom_channel **ch_info, + const u8 **eeprom_ch_array) +{ + u32 offset = cfg->eeprom_params->regulatory_bands[eeprom_band - 1]; + + offset |= INDIRECT_ADDRESS | INDIRECT_REGULATORY; + + *ch_info = (void *)iwl_eeprom_query_addr(eeprom, eeprom_size, offset); + + switch (eeprom_band) { + case 1: /* 2.4GHz band */ + *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_1); + *eeprom_ch_array = iwl_eeprom_band_1; + break; + case 2: /* 4.9GHz band */ + *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_2); + *eeprom_ch_array = iwl_eeprom_band_2; + break; + case 3: /* 5.2GHz band */ + *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_3); + *eeprom_ch_array = iwl_eeprom_band_3; + break; + case 4: /* 5.5GHz band */ + *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_4); + *eeprom_ch_array = iwl_eeprom_band_4; + break; + case 5: /* 5.7GHz band */ + *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_5); + *eeprom_ch_array = iwl_eeprom_band_5; + break; + case 6: /* 2.4GHz ht40 channels */ + *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_6); + *eeprom_ch_array = iwl_eeprom_band_6; + break; + case 7: /* 5 GHz ht40 channels */ + *eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_7); + *eeprom_ch_array = iwl_eeprom_band_7; + break; + default: + *eeprom_ch_count = 0; + *eeprom_ch_array = NULL; + WARN_ON(1); + } +} + +#define CHECK_AND_PRINT(x) \ + ((eeprom_ch->flags & EEPROM_CHANNEL_##x) ? # x " " : "") + +static void iwl_mod_ht40_chan_info(struct device *dev, + struct iwl_nvm_data *data, int n_channels, + enum nl80211_band band, u16 channel, + const struct iwl_eeprom_channel *eeprom_ch, + u8 clear_ht40_extension_channel) +{ + struct ieee80211_channel *chan = NULL; + int i; + + for (i = 0; i < n_channels; i++) { + if (data->channels[i].band != band) + continue; + if (data->channels[i].hw_value != channel) + continue; + chan = &data->channels[i]; + break; + } + + if (!chan) + return; + + IWL_DEBUG_EEPROM(dev, + "HT40 Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm): Ad-Hoc %ssupported\n", + channel, + band == NL80211_BAND_5GHZ ? "5.2" : "2.4", + CHECK_AND_PRINT(IBSS), + CHECK_AND_PRINT(ACTIVE), + CHECK_AND_PRINT(RADAR), + CHECK_AND_PRINT(WIDE), + CHECK_AND_PRINT(DFS), + eeprom_ch->flags, + eeprom_ch->max_power_avg, + ((eeprom_ch->flags & EEPROM_CHANNEL_IBSS) && + !(eeprom_ch->flags & EEPROM_CHANNEL_RADAR)) ? "" + : "not "); + + if (eeprom_ch->flags & EEPROM_CHANNEL_VALID) + chan->flags &= ~clear_ht40_extension_channel; +} + +#define CHECK_AND_PRINT_I(x) \ + ((eeprom_ch_info[ch_idx].flags & EEPROM_CHANNEL_##x) ? # x " " : "") + +static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg, + struct iwl_nvm_data *data, + const u8 *eeprom, size_t eeprom_size) +{ + int band, ch_idx; + const struct iwl_eeprom_channel *eeprom_ch_info; + const u8 *eeprom_ch_array; + int eeprom_ch_count; + int n_channels = 0; + + /* + * Loop through the 5 EEPROM bands and add them to the parse list + */ + for (band = 1; band <= 5; band++) { + struct ieee80211_channel *channel; + + iwl_init_band_reference(cfg, eeprom, eeprom_size, band, + &eeprom_ch_count, &eeprom_ch_info, + &eeprom_ch_array); + + /* Loop through each band adding each of the channels */ + for (ch_idx = 0; ch_idx < eeprom_ch_count; ch_idx++) { + const struct iwl_eeprom_channel *eeprom_ch; + + eeprom_ch = &eeprom_ch_info[ch_idx]; + + if (!(eeprom_ch->flags & EEPROM_CHANNEL_VALID)) { + IWL_DEBUG_EEPROM(dev, + "Ch. %d Flags %x [%sGHz] - No traffic\n", + eeprom_ch_array[ch_idx], + eeprom_ch_info[ch_idx].flags, + (band != 1) ? "5.2" : "2.4"); + continue; + } + + channel = &data->channels[n_channels]; + n_channels++; + + channel->hw_value = eeprom_ch_array[ch_idx]; + channel->band = (band == 1) ? NL80211_BAND_2GHZ + : NL80211_BAND_5GHZ; + channel->center_freq = + ieee80211_channel_to_frequency( + channel->hw_value, channel->band); + + /* set no-HT40, will enable as appropriate later */ + channel->flags = IEEE80211_CHAN_NO_HT40; + + if (!(eeprom_ch->flags & EEPROM_CHANNEL_IBSS)) + channel->flags |= IEEE80211_CHAN_NO_IR; + + if (!(eeprom_ch->flags & EEPROM_CHANNEL_ACTIVE)) + channel->flags |= IEEE80211_CHAN_NO_IR; + + if (eeprom_ch->flags & EEPROM_CHANNEL_RADAR) + channel->flags |= IEEE80211_CHAN_RADAR; + + /* Initialize regulatory-based run-time data */ + channel->max_power = + eeprom_ch_info[ch_idx].max_power_avg; + IWL_DEBUG_EEPROM(dev, + "Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x %ddBm): Ad-Hoc %ssupported\n", + channel->hw_value, + (band != 1) ? "5.2" : "2.4", + CHECK_AND_PRINT_I(VALID), + CHECK_AND_PRINT_I(IBSS), + CHECK_AND_PRINT_I(ACTIVE), + CHECK_AND_PRINT_I(RADAR), + CHECK_AND_PRINT_I(WIDE), + CHECK_AND_PRINT_I(DFS), + eeprom_ch_info[ch_idx].flags, + eeprom_ch_info[ch_idx].max_power_avg, + ((eeprom_ch_info[ch_idx].flags & + EEPROM_CHANNEL_IBSS) && + !(eeprom_ch_info[ch_idx].flags & + EEPROM_CHANNEL_RADAR)) + ? "" : "not "); + } + } + + if (cfg->eeprom_params->enhanced_txpower) { + /* + * for newer device (6000 series and up) + * EEPROM contain enhanced tx power information + * driver need to process addition information + * to determine the max channel tx power limits + */ + iwl_eeprom_enhanced_txpower(dev, data, eeprom, eeprom_size, + n_channels); + } else { + /* All others use data from channel map */ + int i; + + data->max_tx_pwr_half_dbm = -128; + + for (i = 0; i < n_channels; i++) + data->max_tx_pwr_half_dbm = + max_t(s8, data->max_tx_pwr_half_dbm, + data->channels[i].max_power * 2); + } + + /* Check if we do have HT40 channels */ + if (cfg->eeprom_params->regulatory_bands[5] == + EEPROM_REGULATORY_BAND_NO_HT40 && + cfg->eeprom_params->regulatory_bands[6] == + EEPROM_REGULATORY_BAND_NO_HT40) + return n_channels; + + /* Two additional EEPROM bands for 2.4 and 5 GHz HT40 channels */ + for (band = 6; band <= 7; band++) { + enum nl80211_band ieeeband; + + iwl_init_band_reference(cfg, eeprom, eeprom_size, band, + &eeprom_ch_count, &eeprom_ch_info, + &eeprom_ch_array); + + /* EEPROM band 6 is 2.4, band 7 is 5 GHz */ + ieeeband = (band == 6) ? NL80211_BAND_2GHZ + : NL80211_BAND_5GHZ; + + /* Loop through each band adding each of the channels */ + for (ch_idx = 0; ch_idx < eeprom_ch_count; ch_idx++) { + /* Set up driver's info for lower half */ + iwl_mod_ht40_chan_info(dev, data, n_channels, ieeeband, + eeprom_ch_array[ch_idx], + &eeprom_ch_info[ch_idx], + IEEE80211_CHAN_NO_HT40PLUS); + + /* Set up driver's info for upper half */ + iwl_mod_ht40_chan_info(dev, data, n_channels, ieeeband, + eeprom_ch_array[ch_idx] + 4, + &eeprom_ch_info[ch_idx], + IEEE80211_CHAN_NO_HT40MINUS); + } + } + + return n_channels; +} +/* + * EEPROM access time values: + * + * Driver initiates EEPROM read by writing byte address << 1 to CSR_EEPROM_REG. + * Driver then polls CSR_EEPROM_REG for CSR_EEPROM_REG_READ_VALID_MSK (0x1). + * When polling, wait 10 uSec between polling loops, up to a maximum 5000 uSec. + * Driver reads 16-bit value from bits 31-16 of CSR_EEPROM_REG. + */ +#define IWL_EEPROM_ACCESS_TIMEOUT 5000 /* uSec */ + +/* + * The device's EEPROM semaphore prevents conflicts between driver and uCode + * when accessing the EEPROM; each access is a series of pulses to/from the + * EEPROM chip, not a single event, so even reads could conflict if they + * weren't arbitrated by the semaphore. + */ +#define IWL_EEPROM_SEM_TIMEOUT 10 /* microseconds */ +#define IWL_EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */ + + +static int iwl_eeprom_acquire_semaphore(struct iwl_trans *trans) +{ + u16 count; + int ret; + + for (count = 0; count < IWL_EEPROM_SEM_RETRY_LIMIT; count++) { + /* Request semaphore */ + iwl_set_bit(trans, CSR_HW_IF_CONFIG_REG, + CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM); + + /* See if we got it */ + ret = iwl_poll_bit(trans, CSR_HW_IF_CONFIG_REG, + CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM, + CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM, + IWL_EEPROM_SEM_TIMEOUT); + if (ret >= 0) { + IWL_DEBUG_EEPROM(trans->dev, + "Acquired semaphore after %d tries.\n", + count+1); + return ret; + } + } + + return ret; +} + +static void iwl_eeprom_release_semaphore(struct iwl_trans *trans) +{ + iwl_clear_bit(trans, CSR_HW_IF_CONFIG_REG, + CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM); +} + +static int iwl_eeprom_verify_signature(struct iwl_trans *trans, bool nvm_is_otp) +{ + u32 gp = iwl_read32(trans, CSR_EEPROM_GP) & CSR_EEPROM_GP_VALID_MSK; + + IWL_DEBUG_EEPROM(trans->dev, "EEPROM signature=0x%08x\n", gp); + + switch (gp) { + case CSR_EEPROM_GP_BAD_SIG_EEP_GOOD_SIG_OTP: + if (!nvm_is_otp) { + IWL_ERR(trans, "EEPROM with bad signature: 0x%08x\n", + gp); + return -ENOENT; + } + return 0; + case CSR_EEPROM_GP_GOOD_SIG_EEP_LESS_THAN_4K: + case CSR_EEPROM_GP_GOOD_SIG_EEP_MORE_THAN_4K: + if (nvm_is_otp) { + IWL_ERR(trans, "OTP with bad signature: 0x%08x\n", gp); + return -ENOENT; + } + return 0; + case CSR_EEPROM_GP_BAD_SIGNATURE_BOTH_EEP_AND_OTP: + default: + IWL_ERR(trans, + "bad EEPROM/OTP signature, type=%s, EEPROM_GP=0x%08x\n", + nvm_is_otp ? "OTP" : "EEPROM", gp); + return -ENOENT; + } +} + +/****************************************************************************** + * + * OTP related functions + * +******************************************************************************/ + +static void iwl_set_otp_access_absolute(struct iwl_trans *trans) +{ + iwl_read32(trans, CSR_OTP_GP_REG); + + iwl_clear_bit(trans, CSR_OTP_GP_REG, + CSR_OTP_GP_REG_OTP_ACCESS_MODE); +} + +static int iwl_nvm_is_otp(struct iwl_trans *trans) +{ + u32 otpgp; + + /* OTP only valid for CP/PP and after */ + switch (trans->hw_rev & CSR_HW_REV_TYPE_MSK) { + case CSR_HW_REV_TYPE_NONE: + IWL_ERR(trans, "Unknown hardware type\n"); + return -EIO; + case CSR_HW_REV_TYPE_5300: + case CSR_HW_REV_TYPE_5350: + case CSR_HW_REV_TYPE_5100: + case CSR_HW_REV_TYPE_5150: + return 0; + default: + otpgp = iwl_read32(trans, CSR_OTP_GP_REG); + if (otpgp & CSR_OTP_GP_REG_DEVICE_SELECT) + return 1; + return 0; + } +} + +static int iwl_init_otp_access(struct iwl_trans *trans) +{ + int ret; + + ret = iwl_finish_nic_init(trans); + if (ret) + return ret; + + iwl_set_bits_prph(trans, APMG_PS_CTRL_REG, + APMG_PS_CTRL_VAL_RESET_REQ); + udelay(5); + iwl_clear_bits_prph(trans, APMG_PS_CTRL_REG, + APMG_PS_CTRL_VAL_RESET_REQ); + + /* + * CSR auto clock gate disable bit - + * this is only applicable for HW with OTP shadow RAM + */ + if (trans->trans_cfg->base_params->shadow_ram_support) + iwl_set_bit(trans, CSR_DBG_LINK_PWR_MGMT_REG, + CSR_RESET_LINK_PWR_MGMT_DISABLED); + + return 0; +} + +static int iwl_read_otp_word(struct iwl_trans *trans, u16 addr, + __le16 *eeprom_data) +{ + int ret = 0; + u32 r; + u32 otpgp; + + iwl_write32(trans, CSR_EEPROM_REG, + CSR_EEPROM_REG_MSK_ADDR & (addr << 1)); + ret = iwl_poll_bit(trans, CSR_EEPROM_REG, + CSR_EEPROM_REG_READ_VALID_MSK, + CSR_EEPROM_REG_READ_VALID_MSK, + IWL_EEPROM_ACCESS_TIMEOUT); + if (ret < 0) { + IWL_ERR(trans, "Time out reading OTP[%d]\n", addr); + return ret; + } + r = iwl_read32(trans, CSR_EEPROM_REG); + /* check for ECC errors: */ + otpgp = iwl_read32(trans, CSR_OTP_GP_REG); + if (otpgp & CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK) { + /* stop in this case */ + /* set the uncorrectable OTP ECC bit for acknowledgment */ + iwl_set_bit(trans, CSR_OTP_GP_REG, + CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK); + IWL_ERR(trans, "Uncorrectable OTP ECC error, abort OTP read\n"); + return -EINVAL; + } + if (otpgp & CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK) { + /* continue in this case */ + /* set the correctable OTP ECC bit for acknowledgment */ + iwl_set_bit(trans, CSR_OTP_GP_REG, + CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK); + IWL_ERR(trans, "Correctable OTP ECC error, continue read\n"); + } + *eeprom_data = cpu_to_le16(r >> 16); + return 0; +} + +/* + * iwl_is_otp_empty: check for empty OTP + */ +static bool iwl_is_otp_empty(struct iwl_trans *trans) +{ + u16 next_link_addr = 0; + __le16 link_value; + bool is_empty = false; + + /* locate the beginning of OTP link list */ + if (!iwl_read_otp_word(trans, next_link_addr, &link_value)) { + if (!link_value) { + IWL_ERR(trans, "OTP is empty\n"); + is_empty = true; + } + } else { + IWL_ERR(trans, "Unable to read first block of OTP list.\n"); + is_empty = true; + } + + return is_empty; +} + + +/* + * iwl_find_otp_image: find EEPROM image in OTP + * finding the OTP block that contains the EEPROM image. + * the last valid block on the link list (the block _before_ the last block) + * is the block we should read and used to configure the device. + * If all the available OTP blocks are full, the last block will be the block + * we should read and used to configure the device. + * only perform this operation if shadow RAM is disabled + */ +static int iwl_find_otp_image(struct iwl_trans *trans, + u16 *validblockaddr) +{ + u16 next_link_addr = 0, valid_addr; + __le16 link_value = 0; + int usedblocks = 0; + + /* set addressing mode to absolute to traverse the link list */ + iwl_set_otp_access_absolute(trans); + + /* checking for empty OTP or error */ + if (iwl_is_otp_empty(trans)) + return -EINVAL; + + /* + * start traverse link list + * until reach the max number of OTP blocks + * different devices have different number of OTP blocks + */ + do { + /* save current valid block address + * check for more block on the link list + */ + valid_addr = next_link_addr; + next_link_addr = le16_to_cpu(link_value) * sizeof(u16); + IWL_DEBUG_EEPROM(trans->dev, "OTP blocks %d addr 0x%x\n", + usedblocks, next_link_addr); + if (iwl_read_otp_word(trans, next_link_addr, &link_value)) + return -EINVAL; + if (!link_value) { + /* + * reach the end of link list, return success and + * set address point to the starting address + * of the image + */ + *validblockaddr = valid_addr; + /* skip first 2 bytes (link list pointer) */ + *validblockaddr += 2; + return 0; + } + /* more in the link list, continue */ + usedblocks++; + } while (usedblocks <= trans->trans_cfg->base_params->max_ll_items); + + /* OTP has no valid blocks */ + IWL_DEBUG_EEPROM(trans->dev, "OTP has no valid blocks\n"); + return -EINVAL; +} + +/* + * iwl_read_eeprom - read EEPROM contents + * + * Load the EEPROM contents from adapter and return it + * and its size. + * + * NOTE: This routine uses the non-debug IO access functions. + */ +int iwl_read_eeprom(struct iwl_trans *trans, u8 **eeprom, size_t *eeprom_size) +{ + __le16 *e; + u32 gp = iwl_read32(trans, CSR_EEPROM_GP); + int sz; + int ret; + u16 addr; + u16 validblockaddr = 0; + u16 cache_addr = 0; + int nvm_is_otp; + + if (!eeprom || !eeprom_size) + return -EINVAL; + + nvm_is_otp = iwl_nvm_is_otp(trans); + if (nvm_is_otp < 0) + return nvm_is_otp; + + sz = trans->trans_cfg->base_params->eeprom_size; + IWL_DEBUG_EEPROM(trans->dev, "NVM size = %d\n", sz); + + e = kmalloc(sz, GFP_KERNEL); + if (!e) + return -ENOMEM; + + ret = iwl_eeprom_verify_signature(trans, nvm_is_otp); + if (ret < 0) { + IWL_ERR(trans, "EEPROM not found, EEPROM_GP=0x%08x\n", gp); + goto err_free; + } + + /* Make sure driver (instead of uCode) is allowed to read EEPROM */ + ret = iwl_eeprom_acquire_semaphore(trans); + if (ret < 0) { + IWL_ERR(trans, "Failed to acquire EEPROM semaphore.\n"); + goto err_free; + } + + if (nvm_is_otp) { + ret = iwl_init_otp_access(trans); + if (ret) { + IWL_ERR(trans, "Failed to initialize OTP access.\n"); + goto err_unlock; + } + + iwl_write32(trans, CSR_EEPROM_GP, + iwl_read32(trans, CSR_EEPROM_GP) & + ~CSR_EEPROM_GP_IF_OWNER_MSK); + + iwl_set_bit(trans, CSR_OTP_GP_REG, + CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK | + CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK); + /* traversing the linked list if no shadow ram supported */ + if (!trans->trans_cfg->base_params->shadow_ram_support) { + ret = iwl_find_otp_image(trans, &validblockaddr); + if (ret) + goto err_unlock; + } + for (addr = validblockaddr; addr < validblockaddr + sz; + addr += sizeof(u16)) { + __le16 eeprom_data; + + ret = iwl_read_otp_word(trans, addr, &eeprom_data); + if (ret) + goto err_unlock; + e[cache_addr / 2] = eeprom_data; + cache_addr += sizeof(u16); + } + } else { + /* eeprom is an array of 16bit values */ + for (addr = 0; addr < sz; addr += sizeof(u16)) { + u32 r; + + iwl_write32(trans, CSR_EEPROM_REG, + CSR_EEPROM_REG_MSK_ADDR & (addr << 1)); + + ret = iwl_poll_bit(trans, CSR_EEPROM_REG, + CSR_EEPROM_REG_READ_VALID_MSK, + CSR_EEPROM_REG_READ_VALID_MSK, + IWL_EEPROM_ACCESS_TIMEOUT); + if (ret < 0) { + IWL_ERR(trans, + "Time out reading EEPROM[%d]\n", addr); + goto err_unlock; + } + r = iwl_read32(trans, CSR_EEPROM_REG); + e[addr / 2] = cpu_to_le16(r >> 16); + } + } + + IWL_DEBUG_EEPROM(trans->dev, "NVM Type: %s\n", + nvm_is_otp ? "OTP" : "EEPROM"); + + iwl_eeprom_release_semaphore(trans); + + *eeprom_size = sz; + *eeprom = (u8 *)e; + return 0; + + err_unlock: + iwl_eeprom_release_semaphore(trans); + err_free: + kfree(e); + + return ret; +} + +static void iwl_init_sbands(struct iwl_trans *trans, const struct iwl_cfg *cfg, + struct iwl_nvm_data *data, + const u8 *eeprom, size_t eeprom_size) +{ + struct device *dev = trans->dev; + int n_channels = iwl_init_channel_map(dev, cfg, data, + eeprom, eeprom_size); + int n_used = 0; + struct ieee80211_supported_band *sband; + + sband = &data->bands[NL80211_BAND_2GHZ]; + sband->band = NL80211_BAND_2GHZ; + sband->bitrates = &iwl_cfg80211_rates[RATES_24_OFFS]; + sband->n_bitrates = N_RATES_24; + n_used += iwl_init_sband_channels(data, sband, n_channels, + NL80211_BAND_2GHZ); + iwl_init_ht_hw_capab(trans, data, &sband->ht_cap, NL80211_BAND_2GHZ, + data->valid_tx_ant, data->valid_rx_ant); + + sband = &data->bands[NL80211_BAND_5GHZ]; + sband->band = NL80211_BAND_5GHZ; + sband->bitrates = &iwl_cfg80211_rates[RATES_52_OFFS]; + sband->n_bitrates = N_RATES_52; + n_used += iwl_init_sband_channels(data, sband, n_channels, + NL80211_BAND_5GHZ); + iwl_init_ht_hw_capab(trans, data, &sband->ht_cap, NL80211_BAND_5GHZ, + data->valid_tx_ant, data->valid_rx_ant); + + if (n_channels != n_used) + IWL_ERR_DEV(dev, "EEPROM: used only %d of %d channels\n", + n_used, n_channels); +} + +/* EEPROM data functions */ +struct iwl_nvm_data * +iwl_parse_eeprom_data(struct iwl_trans *trans, const struct iwl_cfg *cfg, + const u8 *eeprom, size_t eeprom_size) +{ + struct iwl_nvm_data *data; + struct device *dev = trans->dev; + const void *tmp; + u16 radio_cfg, sku; + + if (WARN_ON(!cfg || !cfg->eeprom_params)) + return NULL; + + data = kzalloc(struct_size(data, channels, IWL_NUM_CHANNELS), + GFP_KERNEL); + if (!data) + return NULL; + + /* get MAC address(es) */ + tmp = iwl_eeprom_query_addr(eeprom, eeprom_size, EEPROM_MAC_ADDRESS); + if (!tmp) + goto err_free; + memcpy(data->hw_addr, tmp, ETH_ALEN); + data->n_hw_addrs = iwl_eeprom_query16(eeprom, eeprom_size, + EEPROM_NUM_MAC_ADDRESS); + + if (iwl_eeprom_read_calib(eeprom, eeprom_size, data)) + goto err_free; + + tmp = iwl_eeprom_query_addr(eeprom, eeprom_size, EEPROM_XTAL); + if (!tmp) + goto err_free; + memcpy(data->xtal_calib, tmp, sizeof(data->xtal_calib)); + + tmp = iwl_eeprom_query_addr(eeprom, eeprom_size, + EEPROM_RAW_TEMPERATURE); + if (!tmp) + goto err_free; + data->raw_temperature = *(__le16 *)tmp; + + tmp = iwl_eeprom_query_addr(eeprom, eeprom_size, + EEPROM_KELVIN_TEMPERATURE); + if (!tmp) + goto err_free; + data->kelvin_temperature = *(__le16 *)tmp; + data->kelvin_voltage = *((__le16 *)tmp + 1); + + radio_cfg = + iwl_eeprom_query16(eeprom, eeprom_size, EEPROM_RADIO_CONFIG); + data->radio_cfg_dash = EEPROM_RF_CFG_DASH_MSK(radio_cfg); + data->radio_cfg_pnum = EEPROM_RF_CFG_PNUM_MSK(radio_cfg); + data->radio_cfg_step = EEPROM_RF_CFG_STEP_MSK(radio_cfg); + data->radio_cfg_type = EEPROM_RF_CFG_TYPE_MSK(radio_cfg); + data->valid_rx_ant = EEPROM_RF_CFG_RX_ANT_MSK(radio_cfg); + data->valid_tx_ant = EEPROM_RF_CFG_TX_ANT_MSK(radio_cfg); + + sku = iwl_eeprom_query16(eeprom, eeprom_size, + EEPROM_SKU_CAP); + data->sku_cap_11n_enable = sku & EEPROM_SKU_CAP_11N_ENABLE; + data->sku_cap_amt_enable = sku & EEPROM_SKU_CAP_AMT_ENABLE; + data->sku_cap_band_24ghz_enable = sku & EEPROM_SKU_CAP_BAND_24GHZ; + data->sku_cap_band_52ghz_enable = sku & EEPROM_SKU_CAP_BAND_52GHZ; + data->sku_cap_ipan_enable = sku & EEPROM_SKU_CAP_IPAN_ENABLE; + if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_ALL) + data->sku_cap_11n_enable = false; + + data->nvm_version = iwl_eeprom_query16(eeprom, eeprom_size, + EEPROM_VERSION); + + /* check overrides (some devices have wrong EEPROM) */ + if (cfg->valid_tx_ant) + data->valid_tx_ant = cfg->valid_tx_ant; + if (cfg->valid_rx_ant) + data->valid_rx_ant = cfg->valid_rx_ant; + + if (!data->valid_tx_ant || !data->valid_rx_ant) { + IWL_ERR_DEV(dev, "invalid antennas (0x%x, 0x%x)\n", + data->valid_tx_ant, data->valid_rx_ant); + goto err_free; + } + + iwl_init_sbands(trans, cfg, data, eeprom, eeprom_size); + + return data; + err_free: + kfree(data); + return NULL; +} |