diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath5k/phy.c')
| -rw-r--r-- | drivers/net/wireless/ath/ath5k/phy.c | 30 |
1 files changed, 15 insertions, 15 deletions
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c index 98ee85456321..641b13a279e1 100644 --- a/drivers/net/wireless/ath/ath5k/phy.c +++ b/drivers/net/wireless/ath/ath5k/phy.c @@ -75,13 +75,13 @@ /** * ath5k_hw_radio_revision() - Get the PHY Chip revision * @ah: The &struct ath5k_hw - * @band: One of enum ieee80211_band + * @band: One of enum nl80211_band * * Returns the revision number of a 2GHz, 5GHz or single chip * radio. */ u16 -ath5k_hw_radio_revision(struct ath5k_hw *ah, enum ieee80211_band band) +ath5k_hw_radio_revision(struct ath5k_hw *ah, enum nl80211_band band) { unsigned int i; u32 srev; @@ -91,10 +91,10 @@ ath5k_hw_radio_revision(struct ath5k_hw *ah, enum ieee80211_band band) * Set the radio chip access register */ switch (band) { - case IEEE80211_BAND_2GHZ: + case NL80211_BAND_2GHZ: ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_2GHZ, AR5K_PHY(0)); break; - case IEEE80211_BAND_5GHZ: + case NL80211_BAND_5GHZ: ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0)); break; default: @@ -138,11 +138,11 @@ ath5k_channel_ok(struct ath5k_hw *ah, struct ieee80211_channel *channel) u16 freq = channel->center_freq; /* Check if the channel is in our supported range */ - if (channel->band == IEEE80211_BAND_2GHZ) { + if (channel->band == NL80211_BAND_2GHZ) { if ((freq >= ah->ah_capabilities.cap_range.range_2ghz_min) && (freq <= ah->ah_capabilities.cap_range.range_2ghz_max)) return true; - } else if (channel->band == IEEE80211_BAND_5GHZ) + } else if (channel->band == NL80211_BAND_5GHZ) if ((freq >= ah->ah_capabilities.cap_range.range_5ghz_min) && (freq <= ah->ah_capabilities.cap_range.range_5ghz_max)) return true; @@ -743,7 +743,7 @@ done: /** * ath5k_hw_rfgain_init() - Write initial RF gain settings to hw * @ah: The &struct ath5k_hw - * @band: One of enum ieee80211_band + * @band: One of enum nl80211_band * * Write initial RF gain table to set the RF sensitivity. * @@ -751,7 +751,7 @@ done: * with Gain_F calibration */ static int -ath5k_hw_rfgain_init(struct ath5k_hw *ah, enum ieee80211_band band) +ath5k_hw_rfgain_init(struct ath5k_hw *ah, enum nl80211_band band) { const struct ath5k_ini_rfgain *ath5k_rfg; unsigned int i, size, index; @@ -786,7 +786,7 @@ ath5k_hw_rfgain_init(struct ath5k_hw *ah, enum ieee80211_band band) return -EINVAL; } - index = (band == IEEE80211_BAND_2GHZ) ? 1 : 0; + index = (band == NL80211_BAND_2GHZ) ? 1 : 0; for (i = 0; i < size; i++) { AR5K_REG_WAIT(i); @@ -917,7 +917,7 @@ ath5k_hw_rfregs_init(struct ath5k_hw *ah, } /* Set Output and Driver bias current (OB/DB) */ - if (channel->band == IEEE80211_BAND_2GHZ) { + if (channel->band == NL80211_BAND_2GHZ) { if (channel->hw_value == AR5K_MODE_11B) ee_mode = AR5K_EEPROM_MODE_11B; @@ -944,7 +944,7 @@ ath5k_hw_rfregs_init(struct ath5k_hw *ah, AR5K_RF_DB_2GHZ, true); /* RF5111 always needs OB/DB for 5GHz, even if we use 2GHz */ - } else if ((channel->band == IEEE80211_BAND_5GHZ) || + } else if ((channel->band == NL80211_BAND_5GHZ) || (ah->ah_radio == AR5K_RF5111)) { /* For 11a, Turbo and XR we need to choose @@ -1145,7 +1145,7 @@ ath5k_hw_rfregs_init(struct ath5k_hw *ah, } if (ah->ah_radio == AR5K_RF5413 && - channel->band == IEEE80211_BAND_2GHZ) { + channel->band == NL80211_BAND_2GHZ) { ath5k_hw_rfb_op(ah, rf_regs, 1, AR5K_RF_DERBY_CHAN_SEL_MODE, true); @@ -1270,7 +1270,7 @@ ath5k_hw_rf5111_channel(struct ath5k_hw *ah, */ data0 = data1 = 0; - if (channel->band == IEEE80211_BAND_2GHZ) { + if (channel->band == NL80211_BAND_2GHZ) { /* Map 2GHz channel to 5GHz Atheros channel ID */ ret = ath5k_hw_rf5111_chan2athchan( ieee80211_frequency_to_channel(channel->center_freq), @@ -1919,7 +1919,7 @@ ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah, /* Convert current frequency to fbin value (the same way channels * are stored on EEPROM, check out ath5k_eeprom_bin2freq) and scale * up by 2 so we can compare it later */ - if (channel->band == IEEE80211_BAND_2GHZ) { + if (channel->band == NL80211_BAND_2GHZ) { chan_fbin = (channel->center_freq - 2300) * 10; freq_band = AR5K_EEPROM_BAND_2GHZ; } else { @@ -1983,7 +1983,7 @@ ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah, symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz / 4; break; default: - if (channel->band == IEEE80211_BAND_5GHZ) { + if (channel->band == NL80211_BAND_5GHZ) { /* Both sample_freq and chip_freq are 40MHz */ spur_delta_phase = (spur_offset << 17) / 25; spur_freq_sigma_delta = |