diff options
Diffstat (limited to 'drivers/net/ethernet/3com/3c589_cs.c')
| -rw-r--r-- | drivers/net/ethernet/3com/3c589_cs.c | 943 |
1 files changed, 943 insertions, 0 deletions
diff --git a/drivers/net/ethernet/3com/3c589_cs.c b/drivers/net/ethernet/3com/3c589_cs.c new file mode 100644 index 000000000000..972f80ecc510 --- /dev/null +++ b/drivers/net/ethernet/3com/3c589_cs.c @@ -0,0 +1,943 @@ +/*====================================================================== + + A PCMCIA ethernet driver for the 3com 3c589 card. + + Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net + + 3c589_cs.c 1.162 2001/10/13 00:08:50 + + The network driver code is based on Donald Becker's 3c589 code: + + Written 1994 by Donald Becker. + Copyright 1993 United States Government as represented by the + Director, National Security Agency. This software may be used and + distributed according to the terms of the GNU General Public License, + incorporated herein by reference. + Donald Becker may be reached at becker@scyld.com + + Updated for 2.5.x by Alan Cox <alan@lxorguk.ukuu.org.uk> + +======================================================================*/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#define DRV_NAME "3c589_cs" +#define DRV_VERSION "1.162-ac" + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/in.h> +#include <linux/delay.h> +#include <linux/ethtool.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/if_arp.h> +#include <linux/ioport.h> +#include <linux/bitops.h> +#include <linux/jiffies.h> + +#include <pcmcia/cistpl.h> +#include <pcmcia/cisreg.h> +#include <pcmcia/ciscode.h> +#include <pcmcia/ds.h> + +#include <asm/uaccess.h> +#include <asm/io.h> +#include <asm/system.h> + +/* To minimize the size of the driver source I only define operating + constants if they are used several times. You'll need the manual + if you want to understand driver details. */ +/* Offsets from base I/O address. */ +#define EL3_DATA 0x00 +#define EL3_TIMER 0x0a +#define EL3_CMD 0x0e +#define EL3_STATUS 0x0e + +#define EEPROM_READ 0x0080 +#define EEPROM_BUSY 0x8000 + +#define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD) + +/* The top five bits written to EL3_CMD are a command, the lower + 11 bits are the parameter, if applicable. */ +enum c509cmd { + TotalReset = 0<<11, + SelectWindow = 1<<11, + StartCoax = 2<<11, + RxDisable = 3<<11, + RxEnable = 4<<11, + RxReset = 5<<11, + RxDiscard = 8<<11, + TxEnable = 9<<11, + TxDisable = 10<<11, + TxReset = 11<<11, + FakeIntr = 12<<11, + AckIntr = 13<<11, + SetIntrEnb = 14<<11, + SetStatusEnb = 15<<11, + SetRxFilter = 16<<11, + SetRxThreshold = 17<<11, + SetTxThreshold = 18<<11, + SetTxStart = 19<<11, + StatsEnable = 21<<11, + StatsDisable = 22<<11, + StopCoax = 23<<11 +}; + +enum c509status { + IntLatch = 0x0001, + AdapterFailure = 0x0002, + TxComplete = 0x0004, + TxAvailable = 0x0008, + RxComplete = 0x0010, + RxEarly = 0x0020, + IntReq = 0x0040, + StatsFull = 0x0080, + CmdBusy = 0x1000 +}; + +/* The SetRxFilter command accepts the following classes: */ +enum RxFilter { + RxStation = 1, + RxMulticast = 2, + RxBroadcast = 4, + RxProm = 8 +}; + +/* Register window 1 offsets, the window used in normal operation. */ +#define TX_FIFO 0x00 +#define RX_FIFO 0x00 +#define RX_STATUS 0x08 +#define TX_STATUS 0x0B +#define TX_FREE 0x0C /* Remaining free bytes in Tx buffer. */ + +#define WN0_IRQ 0x08 /* Window 0: Set IRQ line in bits 12-15. */ +#define WN4_MEDIA 0x0A /* Window 4: Various transcvr/media bits. */ +#define MEDIA_TP 0x00C0 /* Enable link beat and jabber for 10baseT. */ +#define MEDIA_LED 0x0001 /* Enable link light on 3C589E cards. */ + +/* Time in jiffies before concluding Tx hung */ +#define TX_TIMEOUT ((400*HZ)/1000) + +struct el3_private { + struct pcmcia_device *p_dev; + /* For transceiver monitoring */ + struct timer_list media; + u16 media_status; + u16 fast_poll; + unsigned long last_irq; + spinlock_t lock; +}; + +static const char *if_names[] = { "auto", "10baseT", "10base2", "AUI" }; + +/*====================================================================*/ + +/* Module parameters */ + +MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>"); +MODULE_DESCRIPTION("3Com 3c589 series PCMCIA ethernet driver"); +MODULE_LICENSE("GPL"); + +#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0) + +/* Special hook for setting if_port when module is loaded */ +INT_MODULE_PARM(if_port, 0); + + +/*====================================================================*/ + +static int tc589_config(struct pcmcia_device *link); +static void tc589_release(struct pcmcia_device *link); + +static u16 read_eeprom(unsigned int ioaddr, int index); +static void tc589_reset(struct net_device *dev); +static void media_check(unsigned long arg); +static int el3_config(struct net_device *dev, struct ifmap *map); +static int el3_open(struct net_device *dev); +static netdev_tx_t el3_start_xmit(struct sk_buff *skb, + struct net_device *dev); +static irqreturn_t el3_interrupt(int irq, void *dev_id); +static void update_stats(struct net_device *dev); +static struct net_device_stats *el3_get_stats(struct net_device *dev); +static int el3_rx(struct net_device *dev); +static int el3_close(struct net_device *dev); +static void el3_tx_timeout(struct net_device *dev); +static void set_rx_mode(struct net_device *dev); +static void set_multicast_list(struct net_device *dev); +static const struct ethtool_ops netdev_ethtool_ops; + +static void tc589_detach(struct pcmcia_device *p_dev); + +static const struct net_device_ops el3_netdev_ops = { + .ndo_open = el3_open, + .ndo_stop = el3_close, + .ndo_start_xmit = el3_start_xmit, + .ndo_tx_timeout = el3_tx_timeout, + .ndo_set_config = el3_config, + .ndo_get_stats = el3_get_stats, + .ndo_set_rx_mode = set_multicast_list, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + +static int tc589_probe(struct pcmcia_device *link) +{ + struct el3_private *lp; + struct net_device *dev; + + dev_dbg(&link->dev, "3c589_attach()\n"); + + /* Create new ethernet device */ + dev = alloc_etherdev(sizeof(struct el3_private)); + if (!dev) + return -ENOMEM; + lp = netdev_priv(dev); + link->priv = dev; + lp->p_dev = link; + + spin_lock_init(&lp->lock); + link->resource[0]->end = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; + + link->config_flags |= CONF_ENABLE_IRQ; + link->config_index = 1; + + dev->netdev_ops = &el3_netdev_ops; + dev->watchdog_timeo = TX_TIMEOUT; + + SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); + + return tc589_config(link); +} + +static void tc589_detach(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + + dev_dbg(&link->dev, "3c589_detach\n"); + + unregister_netdev(dev); + + tc589_release(link); + + free_netdev(dev); +} /* tc589_detach */ + +static int tc589_config(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + __be16 *phys_addr; + int ret, i, j, multi = 0, fifo; + unsigned int ioaddr; + static const char * const ram_split[] = {"5:3", "3:1", "1:1", "3:5"}; + u8 *buf; + size_t len; + + dev_dbg(&link->dev, "3c589_config\n"); + + phys_addr = (__be16 *)dev->dev_addr; + /* Is this a 3c562? */ + if (link->manf_id != MANFID_3COM) + dev_info(&link->dev, "hmmm, is this really a 3Com card??\n"); + multi = (link->card_id == PRODID_3COM_3C562); + + link->io_lines = 16; + + /* For the 3c562, the base address must be xx00-xx7f */ + for (i = j = 0; j < 0x400; j += 0x10) { + if (multi && (j & 0x80)) continue; + link->resource[0]->start = j ^ 0x300; + i = pcmcia_request_io(link); + if (i == 0) + break; + } + if (i != 0) + goto failed; + + ret = pcmcia_request_irq(link, el3_interrupt); + if (ret) + goto failed; + + ret = pcmcia_enable_device(link); + if (ret) + goto failed; + + dev->irq = link->irq; + dev->base_addr = link->resource[0]->start; + ioaddr = dev->base_addr; + EL3WINDOW(0); + + /* The 3c589 has an extra EEPROM for configuration info, including + the hardware address. The 3c562 puts the address in the CIS. */ + len = pcmcia_get_tuple(link, 0x88, &buf); + if (buf && len >= 6) { + for (i = 0; i < 3; i++) + phys_addr[i] = htons(le16_to_cpu(buf[i*2])); + kfree(buf); + } else { + kfree(buf); /* 0 < len < 6 */ + for (i = 0; i < 3; i++) + phys_addr[i] = htons(read_eeprom(ioaddr, i)); + if (phys_addr[0] == htons(0x6060)) { + dev_err(&link->dev, "IO port conflict at 0x%03lx-0x%03lx\n", + dev->base_addr, dev->base_addr+15); + goto failed; + } + } + + /* The address and resource configuration register aren't loaded from + the EEPROM and *must* be set to 0 and IRQ3 for the PCMCIA version. */ + outw(0x3f00, ioaddr + 8); + fifo = inl(ioaddr); + + /* The if_port symbol can be set when the module is loaded */ + if ((if_port >= 0) && (if_port <= 3)) + dev->if_port = if_port; + else + dev_err(&link->dev, "invalid if_port requested\n"); + + SET_NETDEV_DEV(dev, &link->dev); + + if (register_netdev(dev) != 0) { + dev_err(&link->dev, "register_netdev() failed\n"); + goto failed; + } + + netdev_info(dev, "3Com 3c%s, io %#3lx, irq %d, hw_addr %pM\n", + (multi ? "562" : "589"), dev->base_addr, dev->irq, + dev->dev_addr); + netdev_info(dev, " %dK FIFO split %s Rx:Tx, %s xcvr\n", + (fifo & 7) ? 32 : 8, ram_split[(fifo >> 16) & 3], + if_names[dev->if_port]); + return 0; + +failed: + tc589_release(link); + return -ENODEV; +} /* tc589_config */ + +static void tc589_release(struct pcmcia_device *link) +{ + pcmcia_disable_device(link); +} + +static int tc589_suspend(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + + if (link->open) + netif_device_detach(dev); + + return 0; +} + +static int tc589_resume(struct pcmcia_device *link) +{ + struct net_device *dev = link->priv; + + if (link->open) { + tc589_reset(dev); + netif_device_attach(dev); + } + + return 0; +} + +/*====================================================================*/ + +/* + Use this for commands that may take time to finish +*/ +static void tc589_wait_for_completion(struct net_device *dev, int cmd) +{ + int i = 100; + outw(cmd, dev->base_addr + EL3_CMD); + while (--i > 0) + if (!(inw(dev->base_addr + EL3_STATUS) & 0x1000)) break; + if (i == 0) + netdev_warn(dev, "command 0x%04x did not complete!\n", cmd); +} + +/* + Read a word from the EEPROM using the regular EEPROM access register. + Assume that we are in register window zero. +*/ +static u16 read_eeprom(unsigned int ioaddr, int index) +{ + int i; + outw(EEPROM_READ + index, ioaddr + 10); + /* Reading the eeprom takes 162 us */ + for (i = 1620; i >= 0; i--) + if ((inw(ioaddr + 10) & EEPROM_BUSY) == 0) + break; + return inw(ioaddr + 12); +} + +/* + Set transceiver type, perhaps to something other than what the user + specified in dev->if_port. +*/ +static void tc589_set_xcvr(struct net_device *dev, int if_port) +{ + struct el3_private *lp = netdev_priv(dev); + unsigned int ioaddr = dev->base_addr; + + EL3WINDOW(0); + switch (if_port) { + case 0: case 1: outw(0, ioaddr + 6); break; + case 2: outw(3<<14, ioaddr + 6); break; + case 3: outw(1<<14, ioaddr + 6); break; + } + /* On PCMCIA, this just turns on the LED */ + outw((if_port == 2) ? StartCoax : StopCoax, ioaddr + EL3_CMD); + /* 10baseT interface, enable link beat and jabber check. */ + EL3WINDOW(4); + outw(MEDIA_LED | ((if_port < 2) ? MEDIA_TP : 0), ioaddr + WN4_MEDIA); + EL3WINDOW(1); + if (if_port == 2) + lp->media_status = ((dev->if_port == 0) ? 0x8000 : 0x4000); + else + lp->media_status = ((dev->if_port == 0) ? 0x4010 : 0x8800); +} + +static void dump_status(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + EL3WINDOW(1); + netdev_info(dev, " irq status %04x, rx status %04x, tx status %02x tx free %04x\n", + inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS), + inb(ioaddr+TX_STATUS), inw(ioaddr+TX_FREE)); + EL3WINDOW(4); + netdev_info(dev, " diagnostics: fifo %04x net %04x ethernet %04x media %04x\n", + inw(ioaddr+0x04), inw(ioaddr+0x06), inw(ioaddr+0x08), + inw(ioaddr+0x0a)); + EL3WINDOW(1); +} + +/* Reset and restore all of the 3c589 registers. */ +static void tc589_reset(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + int i; + + EL3WINDOW(0); + outw(0x0001, ioaddr + 4); /* Activate board. */ + outw(0x3f00, ioaddr + 8); /* Set the IRQ line. */ + + /* Set the station address in window 2. */ + EL3WINDOW(2); + for (i = 0; i < 6; i++) + outb(dev->dev_addr[i], ioaddr + i); + + tc589_set_xcvr(dev, dev->if_port); + + /* Switch to the stats window, and clear all stats by reading. */ + outw(StatsDisable, ioaddr + EL3_CMD); + EL3WINDOW(6); + for (i = 0; i < 9; i++) + inb(ioaddr+i); + inw(ioaddr + 10); + inw(ioaddr + 12); + + /* Switch to register set 1 for normal use. */ + EL3WINDOW(1); + + set_rx_mode(dev); + outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */ + outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */ + outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */ + /* Allow status bits to be seen. */ + outw(SetStatusEnb | 0xff, ioaddr + EL3_CMD); + /* Ack all pending events, and set active indicator mask. */ + outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq, + ioaddr + EL3_CMD); + outw(SetIntrEnb | IntLatch | TxAvailable | RxComplete | StatsFull + | AdapterFailure, ioaddr + EL3_CMD); +} + +static void netdev_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + sprintf(info->bus_info, "PCMCIA 0x%lx", dev->base_addr); +} + +static const struct ethtool_ops netdev_ethtool_ops = { + .get_drvinfo = netdev_get_drvinfo, +}; + +static int el3_config(struct net_device *dev, struct ifmap *map) +{ + if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) { + if (map->port <= 3) { + dev->if_port = map->port; + netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]); + tc589_set_xcvr(dev, dev->if_port); + } else + return -EINVAL; + } + return 0; +} + +static int el3_open(struct net_device *dev) +{ + struct el3_private *lp = netdev_priv(dev); + struct pcmcia_device *link = lp->p_dev; + + if (!pcmcia_dev_present(link)) + return -ENODEV; + + link->open++; + netif_start_queue(dev); + + tc589_reset(dev); + init_timer(&lp->media); + lp->media.function = media_check; + lp->media.data = (unsigned long) dev; + lp->media.expires = jiffies + HZ; + add_timer(&lp->media); + + dev_dbg(&link->dev, "%s: opened, status %4.4x.\n", + dev->name, inw(dev->base_addr + EL3_STATUS)); + + return 0; +} + +static void el3_tx_timeout(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + + netdev_warn(dev, "Transmit timed out!\n"); + dump_status(dev); + dev->stats.tx_errors++; + dev->trans_start = jiffies; /* prevent tx timeout */ + /* Issue TX_RESET and TX_START commands. */ + tc589_wait_for_completion(dev, TxReset); + outw(TxEnable, ioaddr + EL3_CMD); + netif_wake_queue(dev); +} + +static void pop_tx_status(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + int i; + + /* Clear the Tx status stack. */ + for (i = 32; i > 0; i--) { + u_char tx_status = inb(ioaddr + TX_STATUS); + if (!(tx_status & 0x84)) break; + /* reset transmitter on jabber error or underrun */ + if (tx_status & 0x30) + tc589_wait_for_completion(dev, TxReset); + if (tx_status & 0x38) { + netdev_dbg(dev, "transmit error: status 0x%02x\n", tx_status); + outw(TxEnable, ioaddr + EL3_CMD); + dev->stats.tx_aborted_errors++; + } + outb(0x00, ioaddr + TX_STATUS); /* Pop the status stack. */ + } +} + +static netdev_tx_t el3_start_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + struct el3_private *priv = netdev_priv(dev); + unsigned long flags; + + netdev_dbg(dev, "el3_start_xmit(length = %ld) called, status %4.4x.\n", + (long)skb->len, inw(ioaddr + EL3_STATUS)); + + spin_lock_irqsave(&priv->lock, flags); + + dev->stats.tx_bytes += skb->len; + + /* Put out the doubleword header... */ + outw(skb->len, ioaddr + TX_FIFO); + outw(0x00, ioaddr + TX_FIFO); + /* ... and the packet rounded to a doubleword. */ + outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2); + + if (inw(ioaddr + TX_FREE) <= 1536) { + netif_stop_queue(dev); + /* Interrupt us when the FIFO has room for max-sized packet. */ + outw(SetTxThreshold + 1536, ioaddr + EL3_CMD); + } + + pop_tx_status(dev); + spin_unlock_irqrestore(&priv->lock, flags); + dev_kfree_skb(skb); + + return NETDEV_TX_OK; +} + +/* The EL3 interrupt handler. */ +static irqreturn_t el3_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = (struct net_device *) dev_id; + struct el3_private *lp = netdev_priv(dev); + unsigned int ioaddr; + __u16 status; + int i = 0, handled = 1; + + if (!netif_device_present(dev)) + return IRQ_NONE; + + ioaddr = dev->base_addr; + + netdev_dbg(dev, "interrupt, status %4.4x.\n", inw(ioaddr + EL3_STATUS)); + + spin_lock(&lp->lock); + while ((status = inw(ioaddr + EL3_STATUS)) & + (IntLatch | RxComplete | StatsFull)) { + if ((status & 0xe000) != 0x2000) { + netdev_dbg(dev, "interrupt from dead card\n"); + handled = 0; + break; + } + if (status & RxComplete) + el3_rx(dev); + if (status & TxAvailable) { + netdev_dbg(dev, " TX room bit was handled.\n"); + /* There's room in the FIFO for a full-sized packet. */ + outw(AckIntr | TxAvailable, ioaddr + EL3_CMD); + netif_wake_queue(dev); + } + if (status & TxComplete) + pop_tx_status(dev); + if (status & (AdapterFailure | RxEarly | StatsFull)) { + /* Handle all uncommon interrupts. */ + if (status & StatsFull) /* Empty statistics. */ + update_stats(dev); + if (status & RxEarly) { /* Rx early is unused. */ + el3_rx(dev); + outw(AckIntr | RxEarly, ioaddr + EL3_CMD); + } + if (status & AdapterFailure) { + u16 fifo_diag; + EL3WINDOW(4); + fifo_diag = inw(ioaddr + 4); + EL3WINDOW(1); + netdev_warn(dev, "adapter failure, FIFO diagnostic register %04x.\n", + fifo_diag); + if (fifo_diag & 0x0400) { + /* Tx overrun */ + tc589_wait_for_completion(dev, TxReset); + outw(TxEnable, ioaddr + EL3_CMD); + } + if (fifo_diag & 0x2000) { + /* Rx underrun */ + tc589_wait_for_completion(dev, RxReset); + set_rx_mode(dev); + outw(RxEnable, ioaddr + EL3_CMD); + } + outw(AckIntr | AdapterFailure, ioaddr + EL3_CMD); + } + } + if (++i > 10) { + netdev_err(dev, "infinite loop in interrupt, status %4.4x.\n", + status); + /* Clear all interrupts */ + outw(AckIntr | 0xFF, ioaddr + EL3_CMD); + break; + } + /* Acknowledge the IRQ. */ + outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD); + } + lp->last_irq = jiffies; + spin_unlock(&lp->lock); + netdev_dbg(dev, "exiting interrupt, status %4.4x.\n", + inw(ioaddr + EL3_STATUS)); + return IRQ_RETVAL(handled); +} + +static void media_check(unsigned long arg) +{ + struct net_device *dev = (struct net_device *)(arg); + struct el3_private *lp = netdev_priv(dev); + unsigned int ioaddr = dev->base_addr; + u16 media, errs; + unsigned long flags; + + if (!netif_device_present(dev)) goto reschedule; + + /* Check for pending interrupt with expired latency timer: with + this, we can limp along even if the interrupt is blocked */ + if ((inw(ioaddr + EL3_STATUS) & IntLatch) && + (inb(ioaddr + EL3_TIMER) == 0xff)) { + if (!lp->fast_poll) + netdev_warn(dev, "interrupt(s) dropped!\n"); + + local_irq_save(flags); + el3_interrupt(dev->irq, dev); + local_irq_restore(flags); + + lp->fast_poll = HZ; + } + if (lp->fast_poll) { + lp->fast_poll--; + lp->media.expires = jiffies + HZ/100; + add_timer(&lp->media); + return; + } + + /* lp->lock guards the EL3 window. Window should always be 1 except + when the lock is held */ + spin_lock_irqsave(&lp->lock, flags); + EL3WINDOW(4); + media = inw(ioaddr+WN4_MEDIA) & 0xc810; + + /* Ignore collisions unless we've had no irq's recently */ + if (time_before(jiffies, lp->last_irq + HZ)) { + media &= ~0x0010; + } else { + /* Try harder to detect carrier errors */ + EL3WINDOW(6); + outw(StatsDisable, ioaddr + EL3_CMD); + errs = inb(ioaddr + 0); + outw(StatsEnable, ioaddr + EL3_CMD); + dev->stats.tx_carrier_errors += errs; + if (errs || (lp->media_status & 0x0010)) media |= 0x0010; + } + + if (media != lp->media_status) { + if ((media & lp->media_status & 0x8000) && + ((lp->media_status ^ media) & 0x0800)) + netdev_info(dev, "%s link beat\n", + (lp->media_status & 0x0800 ? "lost" : "found")); + else if ((media & lp->media_status & 0x4000) && + ((lp->media_status ^ media) & 0x0010)) + netdev_info(dev, "coax cable %s\n", + (lp->media_status & 0x0010 ? "ok" : "problem")); + if (dev->if_port == 0) { + if (media & 0x8000) { + if (media & 0x0800) + netdev_info(dev, "flipped to 10baseT\n"); + else + tc589_set_xcvr(dev, 2); + } else if (media & 0x4000) { + if (media & 0x0010) + tc589_set_xcvr(dev, 1); + else + netdev_info(dev, "flipped to 10base2\n"); + } + } + lp->media_status = media; + } + + EL3WINDOW(1); + spin_unlock_irqrestore(&lp->lock, flags); + +reschedule: + lp->media.expires = jiffies + HZ; + add_timer(&lp->media); +} + +static struct net_device_stats *el3_get_stats(struct net_device *dev) +{ + struct el3_private *lp = netdev_priv(dev); + unsigned long flags; + struct pcmcia_device *link = lp->p_dev; + + if (pcmcia_dev_present(link)) { + spin_lock_irqsave(&lp->lock, flags); + update_stats(dev); + spin_unlock_irqrestore(&lp->lock, flags); + } + return &dev->stats; +} + +/* + Update statistics. We change to register window 6, so this should be run + single-threaded if the device is active. This is expected to be a rare + operation, and it's simpler for the rest of the driver to assume that + window 1 is always valid rather than use a special window-state variable. + + Caller must hold the lock for this +*/ +static void update_stats(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + + netdev_dbg(dev, "updating the statistics.\n"); + /* Turn off statistics updates while reading. */ + outw(StatsDisable, ioaddr + EL3_CMD); + /* Switch to the stats window, and read everything. */ + EL3WINDOW(6); + dev->stats.tx_carrier_errors += inb(ioaddr + 0); + dev->stats.tx_heartbeat_errors += inb(ioaddr + 1); + /* Multiple collisions. */ inb(ioaddr + 2); + dev->stats.collisions += inb(ioaddr + 3); + dev->stats.tx_window_errors += inb(ioaddr + 4); + dev->stats.rx_fifo_errors += inb(ioaddr + 5); + dev->stats.tx_packets += inb(ioaddr + 6); + /* Rx packets */ inb(ioaddr + 7); + /* Tx deferrals */ inb(ioaddr + 8); + /* Rx octets */ inw(ioaddr + 10); + /* Tx octets */ inw(ioaddr + 12); + + /* Back to window 1, and turn statistics back on. */ + EL3WINDOW(1); + outw(StatsEnable, ioaddr + EL3_CMD); +} + +static int el3_rx(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + int worklimit = 32; + short rx_status; + + netdev_dbg(dev, "in rx_packet(), status %4.4x, rx_status %4.4x.\n", + inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS)); + while (!((rx_status = inw(ioaddr + RX_STATUS)) & 0x8000) && + worklimit > 0) { + worklimit--; + if (rx_status & 0x4000) { /* Error, update stats. */ + short error = rx_status & 0x3800; + dev->stats.rx_errors++; + switch (error) { + case 0x0000: dev->stats.rx_over_errors++; break; + case 0x0800: dev->stats.rx_length_errors++; break; + case 0x1000: dev->stats.rx_frame_errors++; break; + case 0x1800: dev->stats.rx_length_errors++; break; + case 0x2000: dev->stats.rx_frame_errors++; break; + case 0x2800: dev->stats.rx_crc_errors++; break; + } + } else { + short pkt_len = rx_status & 0x7ff; + struct sk_buff *skb; + + skb = dev_alloc_skb(pkt_len+5); + + netdev_dbg(dev, " Receiving packet size %d status %4.4x.\n", + pkt_len, rx_status); + if (skb != NULL) { + skb_reserve(skb, 2); + insl(ioaddr+RX_FIFO, skb_put(skb, pkt_len), + (pkt_len+3)>>2); + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + dev->stats.rx_packets++; + dev->stats.rx_bytes += pkt_len; + } else { + netdev_dbg(dev, "couldn't allocate a sk_buff of size %d.\n", + pkt_len); + dev->stats.rx_dropped++; + } + } + /* Pop the top of the Rx FIFO */ + tc589_wait_for_completion(dev, RxDiscard); + } + if (worklimit == 0) + netdev_warn(dev, "too much work in el3_rx!\n"); + return 0; +} + +static void set_rx_mode(struct net_device *dev) +{ + unsigned int ioaddr = dev->base_addr; + u16 opts = SetRxFilter | RxStation | RxBroadcast; + + if (dev->flags & IFF_PROMISC) + opts |= RxMulticast | RxProm; + else if (!netdev_mc_empty(dev) || (dev->flags & IFF_ALLMULTI)) + opts |= RxMulticast; + outw(opts, ioaddr + EL3_CMD); +} + +static void set_multicast_list(struct net_device *dev) +{ + struct el3_private *priv = netdev_priv(dev); + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + set_rx_mode(dev); + spin_unlock_irqrestore(&priv->lock, flags); +} + +static int el3_close(struct net_device *dev) +{ + struct el3_private *lp = netdev_priv(dev); + struct pcmcia_device *link = lp->p_dev; + unsigned int ioaddr = dev->base_addr; + + dev_dbg(&link->dev, "%s: shutting down ethercard.\n", dev->name); + + if (pcmcia_dev_present(link)) { + /* Turn off statistics ASAP. We update dev->stats below. */ + outw(StatsDisable, ioaddr + EL3_CMD); + + /* Disable the receiver and transmitter. */ + outw(RxDisable, ioaddr + EL3_CMD); + outw(TxDisable, ioaddr + EL3_CMD); + + if (dev->if_port == 2) + /* Turn off thinnet power. Green! */ + outw(StopCoax, ioaddr + EL3_CMD); + else if (dev->if_port == 1) { + /* Disable link beat and jabber */ + EL3WINDOW(4); + outw(0, ioaddr + WN4_MEDIA); + } + + /* Switching back to window 0 disables the IRQ. */ + EL3WINDOW(0); + /* But we explicitly zero the IRQ line select anyway. */ + outw(0x0f00, ioaddr + WN0_IRQ); + + /* Check if the card still exists */ + if ((inw(ioaddr+EL3_STATUS) & 0xe000) == 0x2000) + update_stats(dev); + } + + link->open--; + netif_stop_queue(dev); + del_timer_sync(&lp->media); + + return 0; +} + +static const struct pcmcia_device_id tc589_ids[] = { + PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0101, 0x0562), + PCMCIA_MFC_DEVICE_PROD_ID1(0, "Motorola MARQUIS", 0xf03e4e77), + PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0589), + PCMCIA_DEVICE_PROD_ID12("Farallon", "ENet", 0x58d93fc4, 0x992c2202), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x0035, "cis/3CXEM556.cis"), + PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x003d, "cis/3CXEM556.cis"), + PCMCIA_DEVICE_NULL, +}; +MODULE_DEVICE_TABLE(pcmcia, tc589_ids); + +static struct pcmcia_driver tc589_driver = { + .owner = THIS_MODULE, + .name = "3c589_cs", + .probe = tc589_probe, + .remove = tc589_detach, + .id_table = tc589_ids, + .suspend = tc589_suspend, + .resume = tc589_resume, +}; + +static int __init init_tc589(void) +{ + return pcmcia_register_driver(&tc589_driver); +} + +static void __exit exit_tc589(void) +{ + pcmcia_unregister_driver(&tc589_driver); +} + +module_init(init_tc589); +module_exit(exit_tc589); |