summaryrefslogtreecommitdiff
path: root/drivers/net/dsa/lantiq_gswip.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa/lantiq_gswip.c')
-rw-r--r--drivers/net/dsa/lantiq_gswip.c123
1 files changed, 55 insertions, 68 deletions
diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index a557049e34f5..fcd4505f4925 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -236,7 +236,9 @@
#define GSWIP_TABLE_ACTIVE_VLAN 0x01
#define GSWIP_TABLE_VLAN_MAPPING 0x02
#define GSWIP_TABLE_MAC_BRIDGE 0x0b
-#define GSWIP_TABLE_MAC_BRIDGE_STATIC 0x01 /* Static not, aging entry */
+#define GSWIP_TABLE_MAC_BRIDGE_KEY3_FID GENMASK(5, 0) /* Filtering identifier */
+#define GSWIP_TABLE_MAC_BRIDGE_VAL0_PORT GENMASK(7, 4) /* Port on learned entries */
+#define GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC BIT(0) /* Static, non-aging entry */
#define XRX200_GPHY_FW_ALIGN (16 * 1024)
@@ -653,14 +655,8 @@ static int gswip_add_single_port_br(struct gswip_priv *priv, int port, bool add)
struct gswip_pce_table_entry vlan_active = {0,};
struct gswip_pce_table_entry vlan_mapping = {0,};
unsigned int cpu_port = priv->hw_info->cpu_port;
- unsigned int max_ports = priv->hw_info->max_ports;
int err;
- if (port >= max_ports) {
- dev_err(priv->dev, "single port for %i supported\n", port);
- return -EIO;
- }
-
vlan_active.index = port + 1;
vlan_active.table = GSWIP_TABLE_ACTIVE_VLAN;
vlan_active.key[0] = 0; /* vid */
@@ -695,13 +691,18 @@ static int gswip_port_enable(struct dsa_switch *ds, int port,
struct gswip_priv *priv = ds->priv;
int err;
- if (!dsa_is_user_port(ds, port))
- return 0;
-
if (!dsa_is_cpu_port(ds, port)) {
+ u32 mdio_phy = 0;
+
err = gswip_add_single_port_br(priv, port, true);
if (err)
return err;
+
+ if (phydev)
+ mdio_phy = phydev->mdio.addr & GSWIP_MDIO_PHY_ADDR_MASK;
+
+ gswip_mdio_mask(priv, GSWIP_MDIO_PHY_ADDR_MASK, mdio_phy,
+ GSWIP_MDIO_PHYp(port));
}
/* RMON Counter Enable for port */
@@ -714,16 +715,6 @@ static int gswip_port_enable(struct dsa_switch *ds, int port,
gswip_switch_mask(priv, 0, GSWIP_SDMA_PCTRL_EN,
GSWIP_SDMA_PCTRLp(port));
- if (!dsa_is_cpu_port(ds, port)) {
- u32 mdio_phy = 0;
-
- if (phydev)
- mdio_phy = phydev->mdio.addr & GSWIP_MDIO_PHY_ADDR_MASK;
-
- gswip_mdio_mask(priv, GSWIP_MDIO_PHY_ADDR_MASK, mdio_phy,
- GSWIP_MDIO_PHYp(port));
- }
-
return 0;
}
@@ -731,9 +722,6 @@ static void gswip_port_disable(struct dsa_switch *ds, int port)
{
struct gswip_priv *priv = ds->priv;
- if (!dsa_is_user_port(ds, port))
- return;
-
gswip_switch_mask(priv, GSWIP_FDMA_PCTRL_EN, 0,
GSWIP_FDMA_PCTRLp(port));
gswip_switch_mask(priv, GSWIP_SDMA_PCTRL_EN, 0,
@@ -792,7 +780,7 @@ static int gswip_port_vlan_filtering(struct dsa_switch *ds, int port,
}
if (vlan_filtering) {
- /* Use port based VLAN tag */
+ /* Use tag based VLAN */
gswip_switch_mask(priv,
GSWIP_PCE_VCTRL_VSR,
GSWIP_PCE_VCTRL_UVR | GSWIP_PCE_VCTRL_VIMR |
@@ -801,7 +789,7 @@ static int gswip_port_vlan_filtering(struct dsa_switch *ds, int port,
gswip_switch_mask(priv, GSWIP_PCE_PCTRL_0_TVM, 0,
GSWIP_PCE_PCTRL_0p(port));
} else {
- /* Use port based VLAN tag */
+ /* Use port based VLAN */
gswip_switch_mask(priv,
GSWIP_PCE_VCTRL_UVR | GSWIP_PCE_VCTRL_VIMR |
GSWIP_PCE_VCTRL_VEMR,
@@ -836,7 +824,7 @@ static int gswip_setup(struct dsa_switch *ds)
err = gswip_pce_load_microcode(priv);
if (err) {
- dev_err(priv->dev, "writing PCE microcode failed, %i", err);
+ dev_err(priv->dev, "writing PCE microcode failed, %i\n", err);
return err;
}
@@ -898,8 +886,6 @@ static int gswip_setup(struct dsa_switch *ds)
ds->mtu_enforcement_ingress = true;
- gswip_port_enable(ds, cpu_port, NULL);
-
ds->configure_vlan_while_not_filtering = false;
return 0;
@@ -1314,10 +1300,11 @@ static void gswip_port_fast_age(struct dsa_switch *ds, int port)
if (!mac_bridge.valid)
continue;
- if (mac_bridge.val[1] & GSWIP_TABLE_MAC_BRIDGE_STATIC)
+ if (mac_bridge.val[1] & GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC)
continue;
- if (((mac_bridge.val[0] & GENMASK(7, 4)) >> 4) != port)
+ if (port != FIELD_GET(GSWIP_TABLE_MAC_BRIDGE_VAL0_PORT,
+ mac_bridge.val[0]))
continue;
mac_bridge.valid = false;
@@ -1383,7 +1370,8 @@ static int gswip_port_fdb(struct dsa_switch *ds, int port,
}
if (fid == -1) {
- dev_err(priv->dev, "Port not part of a bridge\n");
+ dev_err(priv->dev, "no FID found for bridge %s\n",
+ bridge->name);
return -EINVAL;
}
@@ -1392,9 +1380,9 @@ static int gswip_port_fdb(struct dsa_switch *ds, int port,
mac_bridge.key[0] = addr[5] | (addr[4] << 8);
mac_bridge.key[1] = addr[3] | (addr[2] << 8);
mac_bridge.key[2] = addr[1] | (addr[0] << 8);
- mac_bridge.key[3] = fid;
+ mac_bridge.key[3] = FIELD_PREP(GSWIP_TABLE_MAC_BRIDGE_KEY3_FID, fid);
mac_bridge.val[0] = add ? BIT(port) : 0; /* port map */
- mac_bridge.val[1] = GSWIP_TABLE_MAC_BRIDGE_STATIC;
+ mac_bridge.val[1] = GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC;
mac_bridge.valid = add;
err = gswip_pce_table_entry_write(priv, &mac_bridge);
@@ -1423,7 +1411,7 @@ static int gswip_port_fdb_dump(struct dsa_switch *ds, int port,
{
struct gswip_priv *priv = ds->priv;
struct gswip_pce_table_entry mac_bridge = {0,};
- unsigned char addr[6];
+ unsigned char addr[ETH_ALEN];
int i;
int err;
@@ -1448,14 +1436,15 @@ static int gswip_port_fdb_dump(struct dsa_switch *ds, int port,
addr[2] = (mac_bridge.key[1] >> 8) & 0xff;
addr[1] = mac_bridge.key[2] & 0xff;
addr[0] = (mac_bridge.key[2] >> 8) & 0xff;
- if (mac_bridge.val[1] & GSWIP_TABLE_MAC_BRIDGE_STATIC) {
+ if (mac_bridge.val[1] & GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC) {
if (mac_bridge.val[0] & BIT(port)) {
err = cb(addr, 0, true, data);
if (err)
return err;
}
} else {
- if (((mac_bridge.val[0] & GENMASK(7, 4)) >> 4) == port) {
+ if (port == FIELD_GET(GSWIP_TABLE_MAC_BRIDGE_VAL0_PORT,
+ mac_bridge.val[0])) {
err = cb(addr, 0, false, data);
if (err)
return err;
@@ -1474,12 +1463,11 @@ static int gswip_port_max_mtu(struct dsa_switch *ds, int port)
static int gswip_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
{
struct gswip_priv *priv = ds->priv;
- int cpu_port = priv->hw_info->cpu_port;
/* CPU port always has maximum mtu of user ports, so use it to set
* switch frame size, including 8 byte special header.
*/
- if (port == cpu_port) {
+ if (dsa_is_cpu_port(ds, port)) {
new_mtu += 8;
gswip_switch_w(priv, VLAN_ETH_HLEN + new_mtu + ETH_FCS_LEN,
GSWIP_MAC_FLEN);
@@ -1516,6 +1504,7 @@ static void gswip_xrx200_phylink_get_caps(struct dsa_switch *ds, int port,
case 2:
case 3:
case 4:
+ case 6:
__set_bit(PHY_INTERFACE_MODE_INTERNAL,
config->supported_interfaces);
break;
@@ -1547,6 +1536,7 @@ static void gswip_xrx300_phylink_get_caps(struct dsa_switch *ds, int port,
case 2:
case 3:
case 4:
+ case 6:
__set_bit(PHY_INTERFACE_MODE_INTERNAL,
config->supported_interfaces);
break;
@@ -1790,7 +1780,7 @@ static u32 gswip_bcm_ram_entry_read(struct gswip_priv *priv, u32 table,
err = gswip_switch_r_timeout(priv, GSWIP_BM_RAM_CTRL,
GSWIP_BM_RAM_CTRL_BAS);
if (err) {
- dev_err(priv->dev, "timeout while reading table: %u, index: %u",
+ dev_err(priv->dev, "timeout while reading table: %u, index: %u\n",
table, index);
return 0;
}
@@ -1929,11 +1919,9 @@ static int gswip_gphy_fw_load(struct gswip_priv *priv, struct gswip_gphy_fw *gph
msleep(200);
ret = request_firmware(&fw, gphy_fw->fw_name, dev);
- if (ret) {
- dev_err(dev, "failed to load firmware: %s, error: %i\n",
- gphy_fw->fw_name, ret);
- return ret;
- }
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to load firmware: %s\n",
+ gphy_fw->fw_name);
/* GPHY cores need the firmware code in a persistent and contiguous
* memory area with a 16 kB boundary aligned start address.
@@ -1946,9 +1934,9 @@ static int gswip_gphy_fw_load(struct gswip_priv *priv, struct gswip_gphy_fw *gph
dev_addr = ALIGN(dma_addr, XRX200_GPHY_FW_ALIGN);
memcpy(fw_addr, fw->data, fw->size);
} else {
- dev_err(dev, "failed to alloc firmware memory\n");
release_firmware(fw);
- return -ENOMEM;
+ return dev_err_probe(dev, -ENOMEM,
+ "failed to alloc firmware memory\n");
}
release_firmware(fw);
@@ -1975,8 +1963,8 @@ static int gswip_gphy_fw_probe(struct gswip_priv *priv,
gphy_fw->clk_gate = devm_clk_get(dev, gphyname);
if (IS_ERR(gphy_fw->clk_gate)) {
- dev_err(dev, "Failed to lookup gate clock\n");
- return PTR_ERR(gphy_fw->clk_gate);
+ return dev_err_probe(dev, PTR_ERR(gphy_fw->clk_gate),
+ "Failed to lookup gate clock\n");
}
ret = of_property_read_u32(gphy_fw_np, "reg", &gphy_fw->fw_addr_offset);
@@ -1996,8 +1984,8 @@ static int gswip_gphy_fw_probe(struct gswip_priv *priv,
gphy_fw->fw_name = priv->gphy_fw_name_cfg->ge_firmware_name;
break;
default:
- dev_err(dev, "Unknown GPHY mode %d\n", gphy_mode);
- return -EINVAL;
+ return dev_err_probe(dev, -EINVAL, "Unknown GPHY mode %d\n",
+ gphy_mode);
}
gphy_fw->reset = of_reset_control_array_get_exclusive(gphy_fw_np);
@@ -2019,7 +2007,7 @@ static void gswip_gphy_fw_remove(struct gswip_priv *priv,
ret = regmap_write(priv->rcu_regmap, gphy_fw->fw_addr_offset, 0);
if (ret)
- dev_err(priv->dev, "can not reset GPHY FW pointer");
+ dev_err(priv->dev, "can not reset GPHY FW pointer\n");
clk_disable_unprepare(gphy_fw->clk_gate);
@@ -2048,8 +2036,9 @@ static int gswip_gphy_fw_list(struct gswip_priv *priv,
priv->gphy_fw_name_cfg = &xrx200a2x_gphy_data;
break;
default:
- dev_err(dev, "unknown GSWIP version: 0x%x", version);
- return -ENOENT;
+ return dev_err_probe(dev, -ENOENT,
+ "unknown GSWIP version: 0x%x\n",
+ version);
}
}
@@ -2057,10 +2046,9 @@ static int gswip_gphy_fw_list(struct gswip_priv *priv,
if (match && match->data)
priv->gphy_fw_name_cfg = match->data;
- if (!priv->gphy_fw_name_cfg) {
- dev_err(dev, "GPHY compatible type not supported");
- return -ENOENT;
- }
+ if (!priv->gphy_fw_name_cfg)
+ return dev_err_probe(dev, -ENOENT,
+ "GPHY compatible type not supported\n");
priv->num_gphy_fw = of_get_available_child_count(gphy_fw_list_np);
if (!priv->num_gphy_fw)
@@ -2161,8 +2149,8 @@ static int gswip_probe(struct platform_device *pdev)
return -EINVAL;
break;
default:
- dev_err(dev, "unknown GSWIP version: 0x%x", version);
- return -ENOENT;
+ return dev_err_probe(dev, -ENOENT,
+ "unknown GSWIP version: 0x%x\n", version);
}
/* bring up the mdio bus */
@@ -2170,28 +2158,27 @@ static int gswip_probe(struct platform_device *pdev)
if (gphy_fw_np) {
err = gswip_gphy_fw_list(priv, gphy_fw_np, version);
of_node_put(gphy_fw_np);
- if (err) {
- dev_err(dev, "gphy fw probe failed\n");
- return err;
- }
+ if (err)
+ return dev_err_probe(dev, err,
+ "gphy fw probe failed\n");
}
/* bring up the mdio bus */
err = gswip_mdio(priv);
if (err) {
- dev_err(dev, "mdio probe failed\n");
+ dev_err_probe(dev, err, "mdio probe failed\n");
goto gphy_fw_remove;
}
err = dsa_register_switch(priv->ds);
if (err) {
- dev_err(dev, "dsa switch register failed: %i\n", err);
+ dev_err_probe(dev, err, "dsa switch registration failed\n");
goto gphy_fw_remove;
}
if (!dsa_is_cpu_port(priv->ds, priv->hw_info->cpu_port)) {
- dev_err(dev, "wrong CPU port defined, HW only supports port: %i",
- priv->hw_info->cpu_port);
- err = -EINVAL;
+ err = dev_err_probe(dev, -EINVAL,
+ "wrong CPU port defined, HW only supports port: %i\n",
+ priv->hw_info->cpu_port);
goto disable_switch;
}