summaryrefslogtreecommitdiff
path: root/drivers/net/dsa/b53/b53_common.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa/b53/b53_common.c')
-rw-r--r--drivers/net/dsa/b53/b53_common.c208
1 files changed, 105 insertions, 103 deletions
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index b2eeff04f4c8..8f50abe739b7 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1266,95 +1266,70 @@ static void b53_adjust_63xx_rgmii(struct dsa_switch *ds, int port,
phy_modes(interface));
}
-static void b53_adjust_link(struct dsa_switch *ds, int port,
- struct phy_device *phydev)
+static void b53_adjust_531x5_rgmii(struct dsa_switch *ds, int port,
+ phy_interface_t interface)
{
struct b53_device *dev = ds->priv;
- struct ethtool_keee *p = &dev->ports[port].eee;
- u8 rgmii_ctrl = 0, reg = 0, off;
- bool tx_pause = false;
- bool rx_pause = false;
-
- if (!phy_is_pseudo_fixed_link(phydev))
- return;
+ u8 rgmii_ctrl = 0, off;
- /* Enable flow control on BCM5301x's CPU port */
- if (is5301x(dev) && dsa_is_cpu_port(ds, port))
- tx_pause = rx_pause = true;
+ if (port == dev->imp_port)
+ off = B53_RGMII_CTRL_IMP;
+ else
+ off = B53_RGMII_CTRL_P(port);
- if (phydev->pause) {
- if (phydev->asym_pause)
- tx_pause = true;
- rx_pause = true;
- }
+ /* Configure the port RGMII clock delay by DLL disabled and
+ * tx_clk aligned timing (restoring to reset defaults)
+ */
+ b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl);
+ rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC |
+ RGMII_CTRL_TIMING_SEL);
- b53_force_port_config(dev, port, phydev->speed, phydev->duplex,
- tx_pause, rx_pause);
- b53_force_link(dev, port, phydev->link);
+ /* PHY_INTERFACE_MODE_RGMII_TXID means TX internal delay, make
+ * sure that we enable the port TX clock internal delay to
+ * account for this internal delay that is inserted, otherwise
+ * the switch won't be able to receive correctly.
+ *
+ * PHY_INTERFACE_MODE_RGMII means that we are not introducing
+ * any delay neither on transmission nor reception, so the
+ * BCM53125 must also be configured accordingly to account for
+ * the lack of delay and introduce
+ *
+ * The BCM53125 switch has its RX clock and TX clock control
+ * swapped, hence the reason why we modify the TX clock path in
+ * the "RGMII" case
+ */
+ if (interface == PHY_INTERFACE_MODE_RGMII_TXID)
+ rgmii_ctrl |= RGMII_CTRL_DLL_TXC;
+ if (interface == PHY_INTERFACE_MODE_RGMII)
+ rgmii_ctrl |= RGMII_CTRL_DLL_TXC | RGMII_CTRL_DLL_RXC;
+ rgmii_ctrl |= RGMII_CTRL_TIMING_SEL;
+ b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl);
- if (is63xx(dev) && port >= B53_63XX_RGMII0)
- b53_adjust_63xx_rgmii(ds, port, phydev->interface);
+ dev_info(ds->dev, "Configured port %d for %s\n", port,
+ phy_modes(interface));
+}
- if (is531x5(dev) && phy_interface_is_rgmii(phydev)) {
- if (port == dev->imp_port)
- off = B53_RGMII_CTRL_IMP;
- else
- off = B53_RGMII_CTRL_P(port);
+static void b53_adjust_5325_mii(struct dsa_switch *ds, int port)
+{
+ struct b53_device *dev = ds->priv;
+ u8 reg = 0;
- /* Configure the port RGMII clock delay by DLL disabled and
- * tx_clk aligned timing (restoring to reset defaults)
- */
- b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl);
- rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC |
- RGMII_CTRL_TIMING_SEL);
-
- /* PHY_INTERFACE_MODE_RGMII_TXID means TX internal delay, make
- * sure that we enable the port TX clock internal delay to
- * account for this internal delay that is inserted, otherwise
- * the switch won't be able to receive correctly.
- *
- * PHY_INTERFACE_MODE_RGMII means that we are not introducing
- * any delay neither on transmission nor reception, so the
- * BCM53125 must also be configured accordingly to account for
- * the lack of delay and introduce
- *
- * The BCM53125 switch has its RX clock and TX clock control
- * swapped, hence the reason why we modify the TX clock path in
- * the "RGMII" case
- */
- if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
- rgmii_ctrl |= RGMII_CTRL_DLL_TXC;
- if (phydev->interface == PHY_INTERFACE_MODE_RGMII)
- rgmii_ctrl |= RGMII_CTRL_DLL_TXC | RGMII_CTRL_DLL_RXC;
- rgmii_ctrl |= RGMII_CTRL_TIMING_SEL;
- b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl);
-
- dev_info(ds->dev, "Configured port %d for %s\n", port,
- phy_modes(phydev->interface));
- }
+ b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
+ &reg);
- /* configure MII port if necessary */
- if (is5325(dev)) {
+ /* reverse mii needs to be enabled */
+ if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
+ b53_write8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
+ reg | PORT_OVERRIDE_RV_MII_25);
b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
&reg);
- /* reverse mii needs to be enabled */
if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
- b53_write8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
- reg | PORT_OVERRIDE_RV_MII_25);
- b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL,
- &reg);
-
- if (!(reg & PORT_OVERRIDE_RV_MII_25)) {
- dev_err(ds->dev,
- "Failed to enable reverse MII mode\n");
- return;
- }
+ dev_err(ds->dev,
+ "Failed to enable reverse MII mode\n");
+ return;
}
}
-
- /* Re-negotiate EEE if it was enabled already */
- p->eee_enabled = b53_eee_init(ds, port, phydev);
}
void b53_port_event(struct dsa_switch *ds, int port)
@@ -1408,30 +1383,48 @@ static void b53_phylink_get_caps(struct dsa_switch *ds, int port,
dev->ops->phylink_get_caps(dev, port, config);
}
-static struct phylink_pcs *b53_phylink_mac_select_pcs(struct dsa_switch *ds,
- int port,
+static struct phylink_pcs *b53_phylink_mac_select_pcs(struct phylink_config *config,
phy_interface_t interface)
{
- struct b53_device *dev = ds->priv;
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct b53_device *dev = dp->ds->priv;
if (!dev->ops->phylink_mac_select_pcs)
return NULL;
- return dev->ops->phylink_mac_select_pcs(dev, port, interface);
+ return dev->ops->phylink_mac_select_pcs(dev, dp->index, interface);
}
-void b53_phylink_mac_config(struct dsa_switch *ds, int port,
- unsigned int mode,
- const struct phylink_link_state *state)
+static void b53_phylink_mac_config(struct phylink_config *config,
+ unsigned int mode,
+ const struct phylink_link_state *state)
{
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ phy_interface_t interface = state->interface;
+ struct dsa_switch *ds = dp->ds;
+ struct b53_device *dev = ds->priv;
+ int port = dp->index;
+
+ if (is63xx(dev) && port >= B53_63XX_RGMII0)
+ b53_adjust_63xx_rgmii(ds, port, interface);
+
+ if (mode == MLO_AN_FIXED) {
+ if (is531x5(dev) && phy_interface_mode_is_rgmii(interface))
+ b53_adjust_531x5_rgmii(ds, port, interface);
+
+ /* configure MII port if necessary */
+ if (is5325(dev))
+ b53_adjust_5325_mii(ds, port);
+ }
}
-EXPORT_SYMBOL(b53_phylink_mac_config);
-void b53_phylink_mac_link_down(struct dsa_switch *ds, int port,
- unsigned int mode,
- phy_interface_t interface)
+static void b53_phylink_mac_link_down(struct phylink_config *config,
+ unsigned int mode,
+ phy_interface_t interface)
{
- struct b53_device *dev = ds->priv;
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct b53_device *dev = dp->ds->priv;
+ int port = dp->index;
if (mode == MLO_AN_PHY)
return;
@@ -1445,24 +1438,31 @@ void b53_phylink_mac_link_down(struct dsa_switch *ds, int port,
dev->ops->serdes_link_set)
dev->ops->serdes_link_set(dev, port, mode, interface, false);
}
-EXPORT_SYMBOL(b53_phylink_mac_link_down);
-void b53_phylink_mac_link_up(struct dsa_switch *ds, int port,
- unsigned int mode,
- phy_interface_t interface,
- struct phy_device *phydev,
- int speed, int duplex,
- bool tx_pause, bool rx_pause)
+static void b53_phylink_mac_link_up(struct phylink_config *config,
+ struct phy_device *phydev,
+ unsigned int mode,
+ phy_interface_t interface,
+ int speed, int duplex,
+ bool tx_pause, bool rx_pause)
{
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct dsa_switch *ds = dp->ds;
struct b53_device *dev = ds->priv;
+ struct ethtool_keee *p = &dev->ports[dp->index].eee;
+ int port = dp->index;
- if (is63xx(dev) && port >= B53_63XX_RGMII0)
- b53_adjust_63xx_rgmii(ds, port, interface);
-
- if (mode == MLO_AN_PHY)
+ if (mode == MLO_AN_PHY) {
+ /* Re-negotiate EEE if it was enabled already */
+ p->eee_enabled = b53_eee_init(ds, port, phydev);
return;
+ }
if (mode == MLO_AN_FIXED) {
+ /* Force flow control on BCM5301x's CPU port */
+ if (is5301x(dev) && dsa_is_cpu_port(ds, port))
+ tx_pause = rx_pause = true;
+
b53_force_port_config(dev, port, speed, duplex,
tx_pause, rx_pause);
b53_force_link(dev, port, true);
@@ -1473,7 +1473,6 @@ void b53_phylink_mac_link_up(struct dsa_switch *ds, int port,
dev->ops->serdes_link_set)
dev->ops->serdes_link_set(dev, port, mode, interface, true);
}
-EXPORT_SYMBOL(b53_phylink_mac_link_up);
int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
struct netlink_ext_ack *extack)
@@ -2268,6 +2267,13 @@ static int b53_get_max_mtu(struct dsa_switch *ds, int port)
return JMS_MAX_SIZE;
}
+static const struct phylink_mac_ops b53_phylink_mac_ops = {
+ .mac_select_pcs = b53_phylink_mac_select_pcs,
+ .mac_config = b53_phylink_mac_config,
+ .mac_link_down = b53_phylink_mac_link_down,
+ .mac_link_up = b53_phylink_mac_link_up,
+};
+
static const struct dsa_switch_ops b53_switch_ops = {
.get_tag_protocol = b53_get_tag_protocol,
.setup = b53_setup,
@@ -2278,12 +2284,7 @@ static const struct dsa_switch_ops b53_switch_ops = {
.get_ethtool_phy_stats = b53_get_ethtool_phy_stats,
.phy_read = b53_phy_read16,
.phy_write = b53_phy_write16,
- .adjust_link = b53_adjust_link,
.phylink_get_caps = b53_phylink_get_caps,
- .phylink_mac_select_pcs = b53_phylink_mac_select_pcs,
- .phylink_mac_config = b53_phylink_mac_config,
- .phylink_mac_link_down = b53_phylink_mac_link_down,
- .phylink_mac_link_up = b53_phylink_mac_link_up,
.port_enable = b53_enable_port,
.port_disable = b53_disable_port,
.get_mac_eee = b53_get_mac_eee,
@@ -2726,6 +2727,7 @@ struct b53_device *b53_switch_alloc(struct device *base,
dev->priv = priv;
dev->ops = ops;
ds->ops = &b53_switch_ops;
+ ds->phylink_mac_ops = &b53_phylink_mac_ops;
dev->vlan_enabled = true;
/* Let DSA handle the case were multiple bridges span the same switch
* device and different VLAN awareness settings are requested, which
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-11-22 02:58:11 +0000