diff options
Diffstat (limited to 'drivers/mtd')
| -rw-r--r-- | drivers/mtd/spi-nor/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/mtd/spi-nor/Makefile | 1 | ||||
| -rw-r--r-- | drivers/mtd/spi-nor/aspeed-smc.c | 726 |
3 files changed, 737 insertions, 0 deletions
diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig index 1e6f037923d9..2f38a6d7fdf8 100644 --- a/drivers/mtd/spi-nor/Kconfig +++ b/drivers/mtd/spi-nor/Kconfig @@ -29,6 +29,16 @@ config MTD_SPI_NOR_USE_4K_SECTORS Please note that some tools/drivers/filesystems may not work with 4096 B erase size (e.g. UBIFS requires 15 KiB as a minimum). +config SPI_ASPEED_SMC + tristate "Aspeed flash controllers in SPI mode" + depends on ARCH_ASPEED || COMPILE_TEST + depends on HAS_IOMEM && OF + help + This enables support for the Firmware Memory controller (FMC) + in the Aspeed AST2500 SoC when attached to SPI NOR chips, + and support for the SPI flash memory controller (SPI) for + the host firmware. The implementation only supports SPI NOR. + config SPI_ATMEL_QUADSPI tristate "Atmel Quad SPI Controller" depends on ARCH_AT91 || (ARM && COMPILE_TEST) diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile index 121695e83542..6ff64bc7fa0e 100644 --- a/drivers/mtd/spi-nor/Makefile +++ b/drivers/mtd/spi-nor/Makefile @@ -1,4 +1,5 @@ obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o +obj-$(CONFIG_SPI_ASPEED_SMC) += aspeed-smc.o obj-$(CONFIG_SPI_ATMEL_QUADSPI) += atmel-quadspi.o obj-$(CONFIG_SPI_CADENCE_QUADSPI) += cadence-quadspi.o obj-$(CONFIG_SPI_FSL_QUADSPI) += fsl-quadspi.o diff --git a/drivers/mtd/spi-nor/aspeed-smc.c b/drivers/mtd/spi-nor/aspeed-smc.c new file mode 100644 index 000000000000..f1e18bea9888 --- /dev/null +++ b/drivers/mtd/spi-nor/aspeed-smc.c @@ -0,0 +1,726 @@ +/* + * ASPEED Static Memory Controller driver + * + * Copyright (c) 2015-2016, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/bug.h> +#include <linux/device.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/spi-nor.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/sysfs.h> + +#define DEVICE_NAME "aspeed-smc" + +/* + * The driver only support SPI flash + */ +enum aspeed_smc_flash_type { + smc_type_nor = 0, + smc_type_nand = 1, + smc_type_spi = 2, +}; + +struct aspeed_smc_chip; + +struct aspeed_smc_info { + u32 maxsize; /* maximum size of chip window */ + u8 nce; /* number of chip enables */ + bool hastype; /* flash type field exists in config reg */ + u8 we0; /* shift for write enable bit for CE0 */ + u8 ctl0; /* offset in regs of ctl for CE0 */ + + void (*set_4b)(struct aspeed_smc_chip *chip); +}; + +static void aspeed_smc_chip_set_4b(struct aspeed_smc_chip *chip); + +static const struct aspeed_smc_info fmc_2500_info = { + .maxsize = 256 * 1024 * 1024, + .nce = 3, + .hastype = true, + .we0 = 16, + .ctl0 = 0x10, + .set_4b = aspeed_smc_chip_set_4b, +}; + +static const struct aspeed_smc_info spi_2500_info = { + .maxsize = 128 * 1024 * 1024, + .nce = 2, + .hastype = false, + .we0 = 16, + .ctl0 = 0x10, + .set_4b = aspeed_smc_chip_set_4b, +}; + +enum aspeed_smc_ctl_reg_value { + smc_base, /* base value without mode for other commands */ + smc_read, /* command reg for (maybe fast) reads */ + smc_write, /* command reg for writes */ + smc_max, +}; + +struct aspeed_smc_controller; + +struct aspeed_smc_chip { + int cs; + struct aspeed_smc_controller *controller; + void __iomem *ctl; /* control register */ + void __iomem *ahb_base; /* base of chip window */ + u32 ctl_val[smc_max]; /* control settings */ + enum aspeed_smc_flash_type type; /* what type of flash */ + struct spi_nor nor; +}; + +struct aspeed_smc_controller { + struct device *dev; + + struct mutex mutex; /* controller access mutex */ + const struct aspeed_smc_info *info; /* type info of controller */ + void __iomem *regs; /* controller registers */ + void __iomem *ahb_base; /* per-chip windows resource */ + + struct aspeed_smc_chip *chips[0]; /* pointers to attached chips */ +}; + +/* + * SPI Flash Configuration Register (AST2500 SPI) + * or + * Type setting Register (AST2500 FMC). + * CE0 and CE1 can only be of type SPI. CE2 can be of type NOR but the + * driver does not support it. + */ +#define CONFIG_REG 0x0 +#define CONFIG_DISABLE_LEGACY BIT(31) /* 1 */ + +#define CONFIG_CE2_WRITE BIT(18) +#define CONFIG_CE1_WRITE BIT(17) +#define CONFIG_CE0_WRITE BIT(16) + +#define CONFIG_CE2_TYPE BIT(4) /* AST2500 FMC only */ +#define CONFIG_CE1_TYPE BIT(2) /* AST2500 FMC only */ +#define CONFIG_CE0_TYPE BIT(0) /* AST2500 FMC only */ + +/* + * CE Control Register + */ +#define CE_CONTROL_REG 0x4 + +/* + * CEx Control Register + */ +#define CONTROL_AAF_MODE BIT(31) +#define CONTROL_IO_MODE_MASK GENMASK(30, 28) +#define CONTROL_IO_DUAL_DATA BIT(29) +#define CONTROL_IO_DUAL_ADDR_DATA (BIT(29) | BIT(28)) +#define CONTROL_IO_QUAD_DATA BIT(30) +#define CONTROL_IO_QUAD_ADDR_DATA (BIT(30) | BIT(28)) +#define CONTROL_CE_INACTIVE_SHIFT 24 +#define CONTROL_CE_INACTIVE_MASK GENMASK(27, \ + CONTROL_CE_INACTIVE_SHIFT) +/* 0 = 16T ... 15 = 1T T=HCLK */ +#define CONTROL_COMMAND_SHIFT 16 +#define CONTROL_DUMMY_COMMAND_OUT BIT(15) +#define CONTROL_IO_DUMMY_HI BIT(14) +#define CONTROL_IO_DUMMY_HI_SHIFT 14 +#define CONTROL_CLK_DIV4 BIT(13) /* others */ +#define CONTROL_RW_MERGE BIT(12) +#define CONTROL_IO_DUMMY_LO_SHIFT 6 +#define CONTROL_IO_DUMMY_LO GENMASK(7, \ + CONTROL_IO_DUMMY_LO_SHIFT) +#define CONTROL_IO_DUMMY_MASK (CONTROL_IO_DUMMY_HI | \ + CONTROL_IO_DUMMY_LO) +#define CONTROL_IO_DUMMY_SET(dummy) \ + (((((dummy) >> 2) & 0x1) << CONTROL_IO_DUMMY_HI_SHIFT) | \ + (((dummy) & 0x3) << CONTROL_IO_DUMMY_LO_SHIFT)) + +#define CONTROL_CLOCK_FREQ_SEL_SHIFT 8 +#define CONTROL_CLOCK_FREQ_SEL_MASK GENMASK(11, \ + CONTROL_CLOCK_FREQ_SEL_SHIFT) +#define CONTROL_LSB_FIRST BIT(5) +#define CONTROL_CLOCK_MODE_3 BIT(4) +#define CONTROL_IN_DUAL_DATA BIT(3) +#define CONTROL_CE_STOP_ACTIVE_CONTROL BIT(2) +#define CONTROL_COMMAND_MODE_MASK GENMASK(1, 0) +#define CONTROL_COMMAND_MODE_NORMAL 0 +#define CONTROL_COMMAND_MODE_FREAD 1 +#define CONTROL_COMMAND_MODE_WRITE 2 +#define CONTROL_COMMAND_MODE_USER 3 + +#define CONTROL_KEEP_MASK \ + (CONTROL_AAF_MODE | CONTROL_CE_INACTIVE_MASK | CONTROL_CLK_DIV4 | \ + CONTROL_IO_DUMMY_MASK | CONTROL_CLOCK_FREQ_SEL_MASK | \ + CONTROL_LSB_FIRST | CONTROL_CLOCK_MODE_3) + +/* + * The Segment Register uses a 8MB unit to encode the start address + * and the end address of the mapping window of a flash SPI slave : + * + * | byte 1 | byte 2 | byte 3 | byte 4 | + * +--------+--------+--------+--------+ + * | end | start | 0 | 0 | + */ +#define SEGMENT_ADDR_REG0 0x30 +#define SEGMENT_ADDR_START(_r) ((((_r) >> 16) & 0xFF) << 23) +#define SEGMENT_ADDR_END(_r) ((((_r) >> 24) & 0xFF) << 23) + +/* + * In user mode all data bytes read or written to the chip decode address + * range are transferred to or from the SPI bus. The range is treated as a + * fifo of arbitratry 1, 2, or 4 byte width but each write has to be aligned + * to its size. The address within the multiple 8kB range is ignored when + * sending bytes to the SPI bus. + * + * On the arm architecture, as of Linux version 4.3, memcpy_fromio and + * memcpy_toio on little endian targets use the optimized memcpy routines + * that were designed for well behavied memory storage. These routines + * have a stutter if the source and destination are not both word aligned, + * once with a duplicate access to the source after aligning to the + * destination to a word boundary, and again with a duplicate access to + * the source when the final byte count is not word aligned. + * + * When writing or reading the fifo this stutter discards data or sends + * too much data to the fifo and can not be used by this driver. + * + * While the low level io string routines that implement the insl family do + * the desired accesses and memory increments, the cross architecture io + * macros make them essentially impossible to use on a memory mapped address + * instead of a a token from the call to iomap of an io port. + * + * These fifo routines use readl and friends to a constant io port and update + * the memory buffer pointer and count via explicit code. The final updates + * to len are optimistically suppressed. + */ +static int aspeed_smc_read_from_ahb(void *buf, const void __iomem *src, + size_t len) +{ + size_t offset = 0; + + if (IS_ALIGNED((uintptr_t)src, sizeof(uintptr_t)) && + IS_ALIGNED((uintptr_t)buf, sizeof(uintptr_t))) { + ioread32_rep(src, buf, len >> 2); + offset = len & ~0x3; + len -= offset; + } + ioread8_rep(src, (u8 *)buf + offset, len); + return 0; +} + +static int aspeed_smc_write_to_ahb(void __iomem *dst, const void *buf, + size_t len) +{ + size_t offset = 0; + + if (IS_ALIGNED((uintptr_t)dst, sizeof(uintptr_t)) && + IS_ALIGNED((uintptr_t)buf, sizeof(uintptr_t))) { + iowrite32_rep(dst, buf, len >> 2); + offset = len & ~0x3; + len -= offset; + } + iowrite8_rep(dst, (const u8 *)buf + offset, len); + return 0; +} + +static inline u32 aspeed_smc_chip_write_bit(struct aspeed_smc_chip *chip) +{ + return BIT(chip->controller->info->we0 + chip->cs); +} + +static void aspeed_smc_chip_check_config(struct aspeed_smc_chip *chip) +{ + struct aspeed_smc_controller *controller = chip->controller; + u32 reg; + + reg = readl(controller->regs + CONFIG_REG); + + if (reg & aspeed_smc_chip_write_bit(chip)) + return; + + dev_dbg(controller->dev, "config write is not set ! @%p: 0x%08x\n", + controller->regs + CONFIG_REG, reg); + reg |= aspeed_smc_chip_write_bit(chip); + writel(reg, controller->regs + CONFIG_REG); +} + +static void aspeed_smc_start_user(struct spi_nor *nor) +{ + struct aspeed_smc_chip *chip = nor->priv; + u32 ctl = chip->ctl_val[smc_base]; + + /* + * When the chip is controlled in user mode, we need write + * access to send the opcodes to it. So check the config. + */ + aspeed_smc_chip_check_config(chip); + + ctl |= CONTROL_COMMAND_MODE_USER | + CONTROL_CE_STOP_ACTIVE_CONTROL; + writel(ctl, chip->ctl); + + ctl &= ~CONTROL_CE_STOP_ACTIVE_CONTROL; + writel(ctl, chip->ctl); +} + +static void aspeed_smc_stop_user(struct spi_nor *nor) +{ + struct aspeed_smc_chip *chip = nor->priv; + + u32 ctl = chip->ctl_val[smc_read]; + u32 ctl2 = ctl | CONTROL_COMMAND_MODE_USER | + CONTROL_CE_STOP_ACTIVE_CONTROL; + + writel(ctl2, chip->ctl); /* stop user CE control */ + writel(ctl, chip->ctl); /* default to fread or read mode */ +} + +static int aspeed_smc_prep(struct spi_nor *nor, enum spi_nor_ops ops) +{ + struct aspeed_smc_chip *chip = nor->priv; + + mutex_lock(&chip->controller->mutex); + return 0; +} + +static void aspeed_smc_unprep(struct spi_nor *nor, enum spi_nor_ops ops) +{ + struct aspeed_smc_chip *chip = nor->priv; + + mutex_unlock(&chip->controller->mutex); +} + +static int aspeed_smc_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) +{ + struct aspeed_smc_chip *chip = nor->priv; + + aspeed_smc_start_user(nor); + aspeed_smc_write_to_ahb(chip->ahb_base, &opcode, 1); + aspeed_smc_read_from_ahb(buf, chip->ahb_base, len); + aspeed_smc_stop_user(nor); + return 0; +} + +static int aspeed_smc_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, + int len) +{ + struct aspeed_smc_chip *chip = nor->priv; + + aspeed_smc_start_user(nor); + aspeed_smc_write_to_ahb(chip->ahb_base, &opcode, 1); + aspeed_smc_write_to_ahb(chip->ahb_base, buf, len); + aspeed_smc_stop_user(nor); + return 0; +} + +static void aspeed_smc_send_cmd_addr(struct spi_nor *nor, u8 cmd, u32 addr) +{ + struct aspeed_smc_chip *chip = nor->priv; + __be32 temp; + u32 cmdaddr; + + switch (nor->addr_width) { + default: + WARN_ONCE(1, "Unexpected address width %u, defaulting to 3\n", + nor->addr_width); + /* FALLTHROUGH */ + case 3: + cmdaddr = addr & 0xFFFFFF; + cmdaddr |= cmd << 24; + + temp = cpu_to_be32(cmdaddr); + aspeed_smc_write_to_ahb(chip->ahb_base, &temp, 4); + break; + case 4: + temp = cpu_to_be32(addr); + aspeed_smc_write_to_ahb(chip->ahb_base, &cmd, 1); + aspeed_smc_write_to_ahb(chip->ahb_base, &temp, 4); + break; + } +} + +static ssize_t aspeed_smc_read_user(struct spi_nor *nor, loff_t from, + size_t len, u_char *read_buf) +{ + struct aspeed_smc_chip *chip = nor->priv; + int i; + u8 dummy = 0xFF; + + aspeed_smc_start_user(nor); + aspeed_smc_send_cmd_addr(nor, nor->read_opcode, from); + for (i = 0; i < chip->nor.read_dummy / 8; i++) + aspeed_smc_write_to_ahb(chip->ahb_base, &dummy, sizeof(dummy)); + + aspeed_smc_read_from_ahb(read_buf, chip->ahb_base, len); + aspeed_smc_stop_user(nor); + return len; +} + +static ssize_t aspeed_smc_write_user(struct spi_nor *nor, loff_t to, + size_t len, const u_char *write_buf) +{ + struct aspeed_smc_chip *chip = nor->priv; + + aspeed_smc_start_user(nor); + aspeed_smc_send_cmd_addr(nor, nor->program_opcode, to); + aspeed_smc_write_to_ahb(chip->ahb_base, write_buf, len); + aspeed_smc_stop_user(nor); + return len; +} + +static int aspeed_smc_unregister(struct aspeed_smc_controller *controller) +{ + struct aspeed_smc_chip *chip; + int n; + + for (n = 0; n < controller->info->nce; n++) { + chip = controller->chips[n]; + if (chip) + mtd_device_unregister(&chip->nor.mtd); + } + + return 0; +} + +static int aspeed_smc_remove(struct platform_device *dev) +{ + return aspeed_smc_unregister(platform_get_drvdata(dev)); +} + +static const struct of_device_id aspeed_smc_matches[] = { + { .compatible = "aspeed,ast2500-fmc", .data = &fmc_2500_info }, + { .compatible = "aspeed,ast2500-spi", .data = &spi_2500_info }, + { } +}; +MODULE_DEVICE_TABLE(of, aspeed_smc_matches); + +/* + * Each chip has a mapping window defined by a segment address + * register defining a start and an end address on the AHB bus. These + * addresses can be configured to fit the chip size and offer a + * contiguous memory region across chips. For the moment, we only + * check that each chip segment is valid. + */ +static void __iomem *aspeed_smc_chip_base(struct aspeed_smc_chip *chip, + struct resource *res) +{ + struct aspeed_smc_controller *controller = chip->controller; + u32 offset = 0; + u32 reg; + + if (controller->info->nce > 1) { + reg = readl(controller->regs + SEGMENT_ADDR_REG0 + + chip->cs * 4); + + if (SEGMENT_ADDR_START(reg) >= SEGMENT_ADDR_END(reg)) + return NULL; + + offset = SEGMENT_ADDR_START(reg) - res->start; + } + + return controller->ahb_base + offset; +} + +static void aspeed_smc_chip_enable_write(struct aspeed_smc_chip *chip) +{ + struct aspeed_smc_controller *controller = chip->controller; + u32 reg; + + reg = readl(controller->regs + CONFIG_REG); + + reg |= aspeed_smc_chip_write_bit(chip); + writel(reg, controller->regs + CONFIG_REG); +} + +static void aspeed_smc_chip_set_type(struct aspeed_smc_chip *chip, int type) +{ + struct aspeed_smc_controller *controller = chip->controller; + u32 reg; + + chip->type = type; + + reg = readl(controller->regs + CONFIG_REG); + reg &= ~(3 << (chip->cs * 2)); + reg |= chip->type << (chip->cs * 2); + writel(reg, controller->regs + CONFIG_REG); +} + +/* + * The AST2500 FMC flash controller should be strapped by hardware, or + * autodetected, but the AST2500 SPI flash needs to be set. + */ +static void aspeed_smc_chip_set_4b(struct aspeed_smc_chip *chip) +{ + struct aspeed_smc_controller *controller = chip->controller; + u32 reg; + + if (chip->controller->info == &spi_2500_info) { + reg = readl(controller->regs + CE_CONTROL_REG); + reg |= 1 << chip->cs; + writel(reg, controller->regs + CE_CONTROL_REG); + } +} + +static int aspeed_smc_chip_setup_init(struct aspeed_smc_chip *chip, + struct resource *res) +{ + struct aspeed_smc_controller *controller = chip->controller; + const struct aspeed_smc_info *info = controller->info; + u32 reg, base_reg; + + /* + * Always turn on the write enable bit to allow opcodes to be + * sent in user mode. + */ + aspeed_smc_chip_enable_write(chip); + + /* The driver only supports SPI type flash */ + if (info->hastype) + aspeed_smc_chip_set_type(chip, smc_type_spi); + + /* + * Configure chip base address in memory + */ + chip->ahb_base = aspeed_smc_chip_base(chip, res); + if (!chip->ahb_base) { + dev_warn(chip->nor.dev, "CE segment window closed.\n"); + return -EINVAL; + } + + /* + * Get value of the inherited control register. U-Boot usually + * does some timing calibration on the FMC chip, so it's good + * to keep them. In the future, we should handle calibration + * from Linux. + */ + reg = readl(chip->ctl); + dev_dbg(controller->dev, "control register: %08x\n", reg); + + base_reg = reg & CONTROL_KEEP_MASK; + if (base_reg != reg) { + dev_dbg(controller->dev, + "control register changed to: %08x\n", + base_reg); + } + chip->ctl_val[smc_base] = base_reg; + + /* + * Retain the prior value of the control register as the + * default if it was normal access mode. Otherwise start with + * the sanitized base value set to read mode. + */ + if ((reg & CONTROL_COMMAND_MODE_MASK) == + CONTROL_COMMAND_MODE_NORMAL) + chip->ctl_val[smc_read] = reg; + else + chip->ctl_val[smc_read] = chip->ctl_val[smc_base] | + CONTROL_COMMAND_MODE_NORMAL; + + dev_dbg(controller->dev, "default control register: %08x\n", + chip->ctl_val[smc_read]); + return 0; +} + +static int aspeed_smc_chip_setup_finish(struct aspeed_smc_chip *chip) +{ + struct aspeed_smc_controller *controller = chip->controller; + const struct aspeed_smc_info *info = controller->info; + u32 cmd; + + if (chip->nor.addr_width == 4 && info->set_4b) + info->set_4b(chip); + + /* + * base mode has not been optimized yet. use it for writes. + */ + chip->ctl_val[smc_write] = chip->ctl_val[smc_base] | + chip->nor.program_opcode << CONTROL_COMMAND_SHIFT | + CONTROL_COMMAND_MODE_WRITE; + + dev_dbg(controller->dev, "write control register: %08x\n", + chip->ctl_val[smc_write]); + + /* + * TODO: Adjust clocks if fast read is supported and interpret + * SPI-NOR flags to adjust controller settings. + */ + switch (chip->nor.flash_read) { + case SPI_NOR_NORMAL: + cmd = CONTROL_COMMAND_MODE_NORMAL; + break; + case SPI_NOR_FAST: + cmd = CONTROL_COMMAND_MODE_FREAD; + break; + default: + dev_err(chip->nor.dev, "unsupported SPI read mode\n"); + return -EINVAL; + } + + chip->ctl_val[smc_read] |= cmd | + CONTROL_IO_DUMMY_SET(chip->nor.read_dummy / 8); + + dev_dbg(controller->dev, "base control register: %08x\n", + chip->ctl_val[smc_read]); + return 0; +} + +static int aspeed_smc_setup_flash(struct aspeed_smc_controller *controller, + struct device_node *np, struct resource *r) +{ + const struct aspeed_smc_info *info = controller->info; + struct device *dev = controller->dev; + struct device_node *child; + unsigned int cs; + int ret = -ENODEV; + + for_each_available_child_of_node(np, child) { + struct aspeed_smc_chip *chip; + struct spi_nor *nor; + struct mtd_info *mtd; + + /* This driver does not support NAND or NOR flash devices. */ + if (!of_device_is_compatible(child, "jedec,spi-nor")) + continue; + + ret = of_property_read_u32(child, "reg", &cs); + if (ret) { + dev_err(dev, "Couldn't not read chip select.\n"); + break; + } + + if (cs >= info->nce) { + dev_err(dev, "Chip select %d out of range.\n", + cs); + ret = -ERANGE; + break; + } + + if (controller->chips[cs]) { + dev_err(dev, "Chip select %d already in use by %s\n", + cs, dev_name(controller->chips[cs]->nor.dev)); + ret = -EBUSY; + break; + } + + chip = devm_kzalloc(controller->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) { + ret = -ENOMEM; + break; + } + + chip->controller = controller; + chip->ctl = controller->regs + info->ctl0 + cs * 4; + chip->cs = cs; + + nor = &chip->nor; + mtd = &nor->mtd; + + nor->dev = dev; + nor->priv = chip; + spi_nor_set_flash_node(nor, child); + nor->read = aspeed_smc_read_user; + nor->write = aspeed_smc_write_user; + nor->read_reg = aspeed_smc_read_reg; + nor->write_reg = aspeed_smc_write_reg; + nor->prepare = aspeed_smc_prep; + nor->unprepare = aspeed_smc_unprep; + + ret = aspeed_smc_chip_setup_init(chip, r); + if (ret) + break; + + /* + * TODO: Add support for SPI_NOR_QUAD and SPI_NOR_DUAL + * attach when board support is present as determined + * by of property. + */ + ret = spi_nor_scan(nor, NULL, SPI_NOR_NORMAL); + if (ret) + break; + + ret = aspeed_smc_chip_setup_finish(chip); + if (ret) + break; + + ret = mtd_device_register(mtd, NULL, 0); + if (ret) + break; + + controller->chips[cs] = chip; + } + + if (ret) + aspeed_smc_unregister(controller); + + return ret; +} + +static int aspeed_smc_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct device *dev = &pdev->dev; + struct aspeed_smc_controller *controller; + const struct of_device_id *match; + const struct aspeed_smc_info *info; + struct resource *res; + int ret; + + match = of_match_device(aspeed_smc_matches, &pdev->dev); + if (!match || !match->data) + return -ENODEV; + info = match->data; + + controller = devm_kzalloc(&pdev->dev, sizeof(*controller) + + info->nce * sizeof(controller->chips[0]), GFP_KERNEL); + if (!controller) + return -ENOMEM; + controller->info = info; + controller->dev = dev; + + mutex_init(&controller->mutex); + platform_set_drvdata(pdev, controller); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + controller->regs = devm_ioremap_resource(dev, res); + if (IS_ERR(controller->regs)) { + dev_err(dev, "Cannot remap controller address.\n"); + return PTR_ERR(controller->regs); + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + controller->ahb_base = devm_ioremap_resource(dev, res); + if (IS_ERR(controller->ahb_base)) { + dev_err(dev, "Cannot remap controller address.\n"); + return PTR_ERR(controller->ahb_base); + } + + ret = aspeed_smc_setup_flash(controller, np, res); + if (ret) + dev_err(dev, "Aspeed SMC probe failed %d\n", ret); + + return ret; +} + +static struct platform_driver aspeed_smc_driver = { + .probe = aspeed_smc_probe, + .remove = aspeed_smc_remove, + .driver = { + .name = DEVICE_NAME, + .of_match_table = aspeed_smc_matches, + } +}; + +module_platform_driver(aspeed_smc_driver); + +MODULE_DESCRIPTION("ASPEED Static Memory Controller Driver"); +MODULE_AUTHOR("Cedric Le Goater <clg@kaod.org>"); +MODULE_LICENSE("GPL v2"); |