summaryrefslogtreecommitdiff
path: root/drivers/ide/qd65xx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/qd65xx.c')
-rw-r--r--drivers/ide/qd65xx.c446
1 files changed, 0 insertions, 446 deletions
diff --git a/drivers/ide/qd65xx.c b/drivers/ide/qd65xx.c
deleted file mode 100644
index ab79b6289464..000000000000
--- a/drivers/ide/qd65xx.c
+++ /dev/null
@@ -1,446 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 1996-2001 Linus Torvalds & author (see below)
- */
-
-/*
- * Version 0.03 Cleaned auto-tune, added probe
- * Version 0.04 Added second channel tuning
- * Version 0.05 Enhanced tuning ; added qd6500 support
- * Version 0.06 Added dos driver's list
- * Version 0.07 Second channel bug fix
- *
- * QDI QD6500/QD6580 EIDE controller fast support
- *
- * To activate controller support, use "ide0=qd65xx"
- */
-
-/*
- * Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by
- * Samuel Thibault <samuel.thibault@ens-lyon.org>
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-#include <asm/io.h>
-
-#define DRV_NAME "qd65xx"
-
-#include "qd65xx.h"
-
-/*
- * I/O ports are 0x30-0x31 (and 0x32-0x33 for qd6580)
- * or 0xb0-0xb1 (and 0xb2-0xb3 for qd6580)
- * -- qd6500 is a single IDE interface
- * -- qd6580 is a dual IDE interface
- *
- * More research on qd6580 being done by willmore@cig.mot.com (David)
- * More Information given by Petr Soucek (petr@ryston.cz)
- * http://www.ryston.cz/petr/vlb
- */
-
-/*
- * base: Timer1
- *
- *
- * base+0x01: Config (R/O)
- *
- * bit 0: ide baseport: 1 = 0x1f0 ; 0 = 0x170 (only useful for qd6500)
- * bit 1: qd65xx baseport: 1 = 0xb0 ; 0 = 0x30
- * bit 2: ID3: bus speed: 1 = <=33MHz ; 0 = >33MHz
- * bit 3: qd6500: 1 = disabled, 0 = enabled
- * qd6580: 1
- * upper nibble:
- * qd6500: 1100
- * qd6580: either 1010 or 0101
- *
- *
- * base+0x02: Timer2 (qd6580 only)
- *
- *
- * base+0x03: Control (qd6580 only)
- *
- * bits 0-3 must always be set 1
- * bit 4 must be set 1, but is set 0 by dos driver while measuring vlb clock
- * bit 0 : 1 = Only primary port enabled : channel 0 for hda, channel 1 for hdb
- * 0 = Primary and Secondary ports enabled : channel 0 for hda & hdb
- * channel 1 for hdc & hdd
- * bit 1 : 1 = only disks on primary port
- * 0 = disks & ATAPI devices on primary port
- * bit 2-4 : always 0
- * bit 5 : status, but of what ?
- * bit 6 : always set 1 by dos driver
- * bit 7 : set 1 for non-ATAPI devices on primary port
- * (maybe read-ahead and post-write buffer ?)
- */
-
-static int timings[4]={-1,-1,-1,-1}; /* stores current timing for each timer */
-
-/*
- * qd65xx_select:
- *
- * This routine is invoked to prepare for access to a given drive.
- */
-
-static void qd65xx_dev_select(ide_drive_t *drive)
-{
- u8 index = (( (QD_TIMREG(drive)) & 0x80 ) >> 7) |
- (QD_TIMREG(drive) & 0x02);
-
- if (timings[index] != QD_TIMING(drive))
- outb(timings[index] = QD_TIMING(drive), QD_TIMREG(drive));
-
- outb(drive->select | ATA_DEVICE_OBS, drive->hwif->io_ports.device_addr);
-}
-
-/*
- * qd6500_compute_timing
- *
- * computes the timing value where
- * lower nibble represents active time, in count of VLB clocks
- * upper nibble represents recovery time, in count of VLB clocks
- */
-
-static u8 qd6500_compute_timing (ide_hwif_t *hwif, int active_time, int recovery_time)
-{
- int clk = ide_vlb_clk ? ide_vlb_clk : 50;
- u8 act_cyc, rec_cyc;
-
- if (clk <= 33) {
- act_cyc = 9 - IDE_IN(active_time * clk / 1000 + 1, 2, 9);
- rec_cyc = 15 - IDE_IN(recovery_time * clk / 1000 + 1, 0, 15);
- } else {
- act_cyc = 8 - IDE_IN(active_time * clk / 1000 + 1, 1, 8);
- rec_cyc = 18 - IDE_IN(recovery_time * clk / 1000 + 1, 3, 18);
- }
-
- return (rec_cyc << 4) | 0x08 | act_cyc;
-}
-
-/*
- * qd6580_compute_timing
- *
- * idem for qd6580
- */
-
-static u8 qd6580_compute_timing (int active_time, int recovery_time)
-{
- int clk = ide_vlb_clk ? ide_vlb_clk : 50;
- u8 act_cyc, rec_cyc;
-
- act_cyc = 17 - IDE_IN(active_time * clk / 1000 + 1, 2, 17);
- rec_cyc = 15 - IDE_IN(recovery_time * clk / 1000 + 1, 2, 15);
-
- return (rec_cyc << 4) | act_cyc;
-}
-
-/*
- * qd_find_disk_type
- *
- * tries to find timing from dos driver's table
- */
-
-static int qd_find_disk_type (ide_drive_t *drive,
- int *active_time, int *recovery_time)
-{
- struct qd65xx_timing_s *p;
- char *m = (char *)&drive->id[ATA_ID_PROD];
- char model[ATA_ID_PROD_LEN];
-
- if (*m == 0)
- return 0;
-
- strncpy(model, m, ATA_ID_PROD_LEN);
- ide_fixstring(model, ATA_ID_PROD_LEN, 1); /* byte-swap */
-
- for (p = qd65xx_timing ; p->offset != -1 ; p++) {
- if (!strncmp(p->model, model+p->offset, 4)) {
- printk(KERN_DEBUG "%s: listed !\n", drive->name);
- *active_time = p->active;
- *recovery_time = p->recovery;
- return 1;
- }
- }
- return 0;
-}
-
-/*
- * qd_set_timing:
- *
- * records the timing
- */
-
-static void qd_set_timing (ide_drive_t *drive, u8 timing)
-{
- unsigned long data = (unsigned long)ide_get_drivedata(drive);
-
- data &= 0xff00;
- data |= timing;
- ide_set_drivedata(drive, (void *)data);
-
- printk(KERN_DEBUG "%s: %#x\n", drive->name, timing);
-}
-
-static void qd6500_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- u16 *id = drive->id;
- int active_time = 175;
- int recovery_time = 415; /* worst case values from the dos driver */
-
- /* FIXME: use drive->pio_mode value */
- if (!qd_find_disk_type(drive, &active_time, &recovery_time) &&
- (id[ATA_ID_OLD_PIO_MODES] & 0xff) && (id[ATA_ID_FIELD_VALID] & 2) &&
- id[ATA_ID_EIDE_PIO] >= 240) {
- printk(KERN_INFO "%s: PIO mode%d\n", drive->name,
- id[ATA_ID_OLD_PIO_MODES] & 0xff);
- active_time = 110;
- recovery_time = drive->id[ATA_ID_EIDE_PIO] - 120;
- }
-
- qd_set_timing(drive, qd6500_compute_timing(drive->hwif,
- active_time, recovery_time));
-}
-
-static void qd6580_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
- const u8 pio = drive->pio_mode - XFER_PIO_0;
- struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
- unsigned int cycle_time;
- int active_time = 175;
- int recovery_time = 415; /* worst case values from the dos driver */
- u8 base = (hwif->config_data & 0xff00) >> 8;
-
- if (drive->id && !qd_find_disk_type(drive, &active_time, &recovery_time)) {
- cycle_time = ide_pio_cycle_time(drive, pio);
-
- switch (pio) {
- case 0: break;
- case 3:
- if (cycle_time >= 110) {
- active_time = 86;
- recovery_time = cycle_time - 102;
- } else
- printk(KERN_WARNING "%s: Strange recovery time !\n",drive->name);
- break;
- case 4:
- if (cycle_time >= 69) {
- active_time = 70;
- recovery_time = cycle_time - 61;
- } else
- printk(KERN_WARNING "%s: Strange recovery time !\n",drive->name);
- break;
- default:
- if (cycle_time >= 180) {
- active_time = 110;
- recovery_time = cycle_time - 120;
- } else {
- active_time = t->active;
- recovery_time = cycle_time - active_time;
- }
- }
- printk(KERN_INFO "%s: PIO mode%d\n", drive->name,pio);
- }
-
- if (!hwif->channel && drive->media != ide_disk) {
- outb(0x5f, QD_CONTROL_PORT);
- printk(KERN_WARNING "%s: ATAPI: disabled read-ahead FIFO "
- "and post-write buffer on %s.\n",
- drive->name, hwif->name);
- }
-
- qd_set_timing(drive, qd6580_compute_timing(active_time, recovery_time));
-}
-
-/*
- * qd_testreg
- *
- * tests if the given port is a register
- */
-
-static int __init qd_testreg(int port)
-{
- unsigned long flags;
- u8 savereg, readreg;
-
- local_irq_save(flags);
- savereg = inb_p(port);
- outb_p(QD_TESTVAL, port); /* safe value */
- readreg = inb_p(port);
- outb(savereg, port);
- local_irq_restore(flags);
-
- if (savereg == QD_TESTVAL) {
- printk(KERN_ERR "Outch ! the probe for qd65xx isn't reliable !\n");
- printk(KERN_ERR "Please contact maintainers to tell about your hardware\n");
- printk(KERN_ERR "Assuming qd65xx is not present.\n");
- return 1;
- }
-
- return (readreg != QD_TESTVAL);
-}
-
-static void __init qd6500_init_dev(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 base = (hwif->config_data & 0xff00) >> 8;
- u8 config = QD_CONFIG(hwif);
-
- ide_set_drivedata(drive, (void *)QD6500_DEF_DATA);
-}
-
-static void __init qd6580_init_dev(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- unsigned long t1, t2;
- u8 base = (hwif->config_data & 0xff00) >> 8;
- u8 config = QD_CONFIG(hwif);
-
- if (hwif->host_flags & IDE_HFLAG_SINGLE) {
- t1 = QD6580_DEF_DATA;
- t2 = QD6580_DEF_DATA2;
- } else
- t2 = t1 = hwif->channel ? QD6580_DEF_DATA2 : QD6580_DEF_DATA;
-
- ide_set_drivedata(drive, (void *)((drive->dn & 1) ? t2 : t1));
-}
-
-static const struct ide_tp_ops qd65xx_tp_ops = {
- .exec_command = ide_exec_command,
- .read_status = ide_read_status,
- .read_altstatus = ide_read_altstatus,
- .write_devctl = ide_write_devctl,
-
- .dev_select = qd65xx_dev_select,
- .tf_load = ide_tf_load,
- .tf_read = ide_tf_read,
-
- .input_data = ide_input_data,
- .output_data = ide_output_data,
-};
-
-static const struct ide_port_ops qd6500_port_ops = {
- .init_dev = qd6500_init_dev,
- .set_pio_mode = qd6500_set_pio_mode,
-};
-
-static const struct ide_port_ops qd6580_port_ops = {
- .init_dev = qd6580_init_dev,
- .set_pio_mode = qd6580_set_pio_mode,
-};
-
-static const struct ide_port_info qd65xx_port_info __initconst = {
- .name = DRV_NAME,
- .tp_ops = &qd65xx_tp_ops,
- .chipset = ide_qd65xx,
- .host_flags = IDE_HFLAG_IO_32BIT |
- IDE_HFLAG_NO_DMA,
- .pio_mask = ATA_PIO4,
-};
-
-/*
- * qd_probe:
- *
- * looks at the specified baseport, and if qd found, registers & initialises it
- * return 1 if another qd may be probed
- */
-
-static int __init qd_probe(int base)
-{
- int rc;
- u8 config, unit, control;
- struct ide_port_info d = qd65xx_port_info;
-
- config = inb(QD_CONFIG_PORT);
-
- if (! ((config & QD_CONFIG_BASEPORT) >> 1 == (base == 0xb0)) )
- return -ENODEV;
-
- unit = ! (config & QD_CONFIG_IDE_BASEPORT);
-
- if (unit)
- d.host_flags |= IDE_HFLAG_QD_2ND_PORT;
-
- switch (config & 0xf0) {
- case QD_CONFIG_QD6500:
- if (qd_testreg(base))
- return -ENODEV; /* bad register */
-
- if (config & QD_CONFIG_DISABLED) {
- printk(KERN_WARNING "qd6500 is disabled !\n");
- return -ENODEV;
- }
-
- printk(KERN_NOTICE "qd6500 at %#x\n", base);
- printk(KERN_DEBUG "qd6500: config=%#x, ID3=%u\n",
- config, QD_ID3);
-
- d.port_ops = &qd6500_port_ops;
- d.host_flags |= IDE_HFLAG_SINGLE;
- break;
- case QD_CONFIG_QD6580_A:
- case QD_CONFIG_QD6580_B:
- if (qd_testreg(base) || qd_testreg(base + 0x02))
- return -ENODEV; /* bad registers */
-
- control = inb(QD_CONTROL_PORT);
-
- printk(KERN_NOTICE "qd6580 at %#x\n", base);
- printk(KERN_DEBUG "qd6580: config=%#x, control=%#x, ID3=%u\n",
- config, control, QD_ID3);
-
- outb(QD_DEF_CONTR, QD_CONTROL_PORT);
-
- d.port_ops = &qd6580_port_ops;
- if (control & QD_CONTR_SEC_DISABLED)
- d.host_flags |= IDE_HFLAG_SINGLE;
-
- printk(KERN_INFO "qd6580: %s IDE board\n",
- (control & QD_CONTR_SEC_DISABLED) ? "single" : "dual");
- break;
- default:
- return -ENODEV;
- }
-
- rc = ide_legacy_device_add(&d, (base << 8) | config);
-
- if (d.host_flags & IDE_HFLAG_SINGLE)
- return (rc == 0) ? 1 : rc;
-
- return rc;
-}
-
-static bool probe_qd65xx;
-
-module_param_named(probe, probe_qd65xx, bool, 0);
-MODULE_PARM_DESC(probe, "probe for QD65xx chipsets");
-
-static int __init qd65xx_init(void)
-{
- int rc1, rc2 = -ENODEV;
-
- if (probe_qd65xx == 0)
- return -ENODEV;
-
- rc1 = qd_probe(0x30);
- if (rc1)
- rc2 = qd_probe(0xb0);
-
- if (rc1 < 0 && rc2 < 0)
- return -ENODEV;
-
- return 0;
-}
-
-module_init(qd65xx_init);
-
-MODULE_AUTHOR("Samuel Thibault");
-MODULE_DESCRIPTION("support of qd65xx vlb ide chipset");
-MODULE_LICENSE("GPL");
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-11-30 04:28:42 +0000