diff options
Diffstat (limited to 'arch/mips/Kconfig')
| -rw-r--r-- | arch/mips/Kconfig | 174 |
1 files changed, 100 insertions, 74 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 690718b3701a..b6338e806a4b 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -92,6 +92,9 @@ config MIPS select SYSCTL_EXCEPTION_TRACE select VIRT_TO_BUS +config MIPS_FIXUP_BIGPHYS_ADDR + bool + menu "Machine selection" choice @@ -157,6 +160,7 @@ config MIPS_ALCHEMY select CSRC_R4K select IRQ_MIPS_CPU select DMA_MAYBE_COHERENT # Au1000,1500,1100 aren't, rest is + select MIPS_FIXUP_BIGPHYS_ADDR if PCI select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_APM_EMULATION @@ -427,23 +431,6 @@ config LANTIQ select ARCH_HAS_RESET_CONTROLLER select RESET_CONTROLLER -config LASAT - bool "LASAT Networks platforms" - select CEVT_R4K - select CRC32 - select CSRC_R4K - select DMA_NONCOHERENT - select SYS_HAS_EARLY_PRINTK - select HAVE_PCI - select IRQ_MIPS_CPU - select PCI_GT64XXX_PCI0 - select MIPS_NILE4 - select R5000_CPU_SCACHE - select SYS_HAS_CPU_R5000 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL if BROKEN - select SYS_SUPPORTS_LITTLE_ENDIAN - config MACH_LOONGSON32 bool "Loongson 32-bit family of machines" select SYS_SUPPORTS_ZBOOT @@ -475,8 +462,10 @@ config MACH_LOONGSON64 select ISA select I8259 select IRQ_MIPS_CPU - select NR_CPUS_DEFAULT_4 + select NO_EXCEPT_FILL + select NR_CPUS_DEFAULT_64 select USE_GENERIC_EARLY_PRINTK_8250 + select PCI_DRIVERS_GENERIC select SYS_HAS_CPU_LOONGSON64 select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_SMP @@ -593,13 +582,6 @@ config MACH_PIC32 Microchip PIC32 is a family of general-purpose 32 bit MIPS core microcontrollers. -config NEC_MARKEINS - bool "NEC EMMA2RH Mark-eins board" - select SOC_EMMA2RH - select HAVE_PCI - help - This enables support for the NEC Electronics Mark-eins boards. - config MACH_VR41XX bool "NEC VR4100 series based machines" select CEVT_R4K @@ -621,30 +603,6 @@ config NXP_STB225 help Support for NXP Semiconductors STB225 Development Board. -config PMC_MSP - bool "PMC-Sierra MSP chipsets" - select CEVT_R4K - select CSRC_R4K - select DMA_NONCOHERENT - select SWAP_IO_SPACE - select NO_EXCEPT_FILL - select BOOT_RAW - select SYS_HAS_CPU_MIPS32_R1 - select SYS_HAS_CPU_MIPS32_R2 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_MIPS16 - select IRQ_MIPS_CPU - select SERIAL_8250 - select SERIAL_8250_CONSOLE - select USB_EHCI_BIG_ENDIAN_MMIO - select USB_EHCI_BIG_ENDIAN_DESC - help - This adds support for the PMC-Sierra family of Multi-Service - Processor System-On-A-Chips. These parts include a number - of integrated peripherals, interfaces and DSPs in addition to - a variety of MIPS cores. - config RALINK bool "Ralink based machines" select CEVT_R4K @@ -1087,10 +1045,8 @@ source "arch/mips/generic/Kconfig" source "arch/mips/jazz/Kconfig" source "arch/mips/jz4740/Kconfig" source "arch/mips/lantiq/Kconfig" -source "arch/mips/lasat/Kconfig" source "arch/mips/pic32/Kconfig" source "arch/mips/pistachio/Kconfig" -source "arch/mips/pmcs-msp71xx/Kconfig" source "arch/mips/ralink/Kconfig" source "arch/mips/sgi-ip27/Kconfig" source "arch/mips/sibyte/Kconfig" @@ -1154,6 +1110,7 @@ config CSRC_IOASIC bool config CSRC_R4K + select CLOCKSOURCE_WATCHDOG if CPU_FREQ bool config CSRC_SB1250 @@ -1211,9 +1168,6 @@ config MIPS_BONITO64 config MIPS_MSC bool -config MIPS_NILE4 - bool - config SYNC_R4K bool @@ -1334,18 +1288,6 @@ config PCI_XTALK_BRIDGE config NO_EXCEPT_FILL bool -config SOC_EMMA2RH - bool - select CEVT_R4K - select CSRC_R4K - select DMA_NONCOHERENT - select IRQ_MIPS_CPU - select SWAP_IO_SPACE - select SYS_HAS_CPU_R5500 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_BIG_ENDIAN - config SOC_PNX833X bool select CEVT_R4K @@ -1419,9 +1361,6 @@ config MIPS_L1_CACHE_SHIFT default "4" if MIPS_L1_CACHE_SHIFT_4 default "5" -config HAVE_STD_PC_SERIAL_PORT - bool - config ARC_CMDLINE_ONLY bool @@ -1504,6 +1443,18 @@ config CPU_LOONGSON3_WORKAROUNDS If unsure, please say Y. +config CPU_LOONGSON3_CPUCFG_EMULATION + bool "Emulate the CPUCFG instruction on older Loongson cores" + default y + depends on CPU_LOONGSON64 + help + Loongson-3A R4 and newer have the CPUCFG instruction available for + userland to query CPU capabilities, much like CPUID on x86. This + option provides emulation of the instruction on older Loongson + cores, back to Loongson-3A1000. + + If unsure, please say Y. + config CPU_LOONGSON2E bool "Loongson 2E" depends on SYS_HAS_CPU_LOONGSON2E @@ -1580,6 +1531,21 @@ config CPU_MIPS32_R2 specific type of processor in your system, choose those that one otherwise CPU_MIPS32_R1 is a safe bet for any MIPS32 system. +config CPU_MIPS32_R5 + bool "MIPS32 Release 5" + depends on SYS_HAS_CPU_MIPS32_R5 + select CPU_HAS_PREFETCH + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_MSA + select HAVE_KVM + select MIPS_O32_FP64_SUPPORT + help + Choose this option to build a kernel for release 5 or later of the + MIPS32 architecture. New MIPS processors, starting with the Warrior + family, are based on a MIPS32r5 processor. If you own an older + processor, you probably need to select MIPS32r1 or MIPS32r2 instead. + config CPU_MIPS32_R6 bool "MIPS32 Release 6" depends on SYS_HAS_CPU_MIPS32_R6 @@ -1632,6 +1598,23 @@ config CPU_MIPS64_R2 specific type of processor in your system, choose those that one otherwise CPU_MIPS64_R1 is a safe bet for any MIPS64 system. +config CPU_MIPS64_R5 + bool "MIPS64 Release 5" + depends on SYS_HAS_CPU_MIPS64_R5 + select CPU_HAS_PREFETCH + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_64BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_HUGEPAGES + select CPU_SUPPORTS_MSA + select MIPS_O32_FP64_SUPPORT if 32BIT || MIPS32_O32 + select HAVE_KVM + help + Choose this option to build a kernel for release 5 or later of the + MIPS64 architecture. This is a intermediate MIPS architecture + release partly implementing release 6 features. Though there is no + any hardware known to be based on this release. + config CPU_MIPS64_R6 bool "MIPS64 Release 6" depends on SYS_HAS_CPU_MIPS64_R6 @@ -1650,6 +1633,28 @@ config CPU_MIPS64_R6 family, are based on a MIPS64r6 processor. If you own an older processor, you probably need to select MIPS64r1 or MIPS64r2 instead. +config CPU_P5600 + bool "MIPS Warrior P5600" + depends on SYS_HAS_CPU_P5600 + select CPU_HAS_PREFETCH + select CPU_SUPPORTS_32BIT_KERNEL + select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_MSA + select CPU_SUPPORTS_UNCACHED_ACCELERATED + select CPU_SUPPORTS_CPUFREQ + select CPU_MIPSR2_IRQ_VI + select CPU_MIPSR2_IRQ_EI + select HAVE_KVM + select MIPS_O32_FP64_SUPPORT + help + Choose this option to build a kernel for MIPS Warrior P5600 CPU. + It's based on MIPS32r5 ISA with XPA, EVA, dual/quad issue exec pipes, + MMU with two-levels TLB, UCA, MSA, MDU core level features and system + level features like up to six P5600 calculation cores, CM2 with L2 + cache, IOCU/IOMMU (though might be unused depending on the system- + specific IP core configuration), GIC, CPC, virtualisation module, + eJTAG and PDtrace. + config CPU_R3000 bool "R3000" depends on SYS_HAS_CPU_R3000 @@ -1826,7 +1831,8 @@ endchoice config CPU_MIPS32_3_5_FEATURES bool "MIPS32 Release 3.5 Features" depends on SYS_HAS_CPU_MIPS32_R3_5 - depends on CPU_MIPS32_R2 || CPU_MIPS32_R6 + depends on CPU_MIPS32_R2 || CPU_MIPS32_R5 || CPU_MIPS32_R6 || \ + CPU_P5600 help Choose this option to build a kernel for release 2 or later of the MIPS32 architecture including features from the 3.5 release such as @@ -1846,7 +1852,7 @@ config CPU_MIPS32_3_5_EVA config CPU_MIPS32_R5_FEATURES bool "MIPS32 Release 5 Features" depends on SYS_HAS_CPU_MIPS32_R5 - depends on CPU_MIPS32_R2 + depends on CPU_MIPS32_R2 || CPU_MIPS32_R5 || CPU_P5600 help Choose this option to build a kernel for release 2 or later of the MIPS32 architecture including features from release 5 such as @@ -2001,6 +2007,10 @@ config SYS_HAS_CPU_MIPS64_R6 bool select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT +config SYS_HAS_CPU_P5600 + bool + select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT + config SYS_HAS_CPU_R3000 bool @@ -2084,11 +2094,13 @@ endmenu # config CPU_MIPS32 bool - default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 || CPU_MIPS32_R6 + default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 || CPU_MIPS32_R5 || \ + CPU_MIPS32_R6 || CPU_P5600 config CPU_MIPS64 bool - default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 || CPU_MIPS64_R6 + default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 || CPU_MIPS64_R5 || \ + CPU_MIPS64_R6 # # These indicate the revision of the architecture @@ -2104,6 +2116,13 @@ config CPU_MIPSR2 select CPU_HAS_DIEI if !CPU_DIEI_BROKEN select MIPS_SPRAM +config CPU_MIPSR5 + bool + default y if CPU_MIPS32_R5 || CPU_MIPS64_R5 || CPU_P5600 + select CPU_HAS_RIXI + select CPU_HAS_DIEI if !CPU_DIEI_BROKEN + select MIPS_SPRAM + config CPU_MIPSR6 bool default y if CPU_MIPS32_R6 || CPU_MIPS64_R6 @@ -2118,6 +2137,7 @@ config TARGET_ISA_REV int default 1 if CPU_MIPSR1 default 2 if CPU_MIPSR2 + default 5 if CPU_MIPSR5 default 6 if CPU_MIPSR6 default 0 help @@ -2707,7 +2727,11 @@ config NEED_PER_CPU_EMBED_FIRST_CHUNK config RELOCATABLE bool "Relocatable kernel" - depends on SYS_SUPPORTS_RELOCATABLE && (CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_MIPS32_R6 || CPU_MIPS64_R6 || CAVIUM_OCTEON_SOC) + depends on SYS_SUPPORTS_RELOCATABLE + depends on CPU_MIPS32_R2 || CPU_MIPS64_R2 || \ + CPU_MIPS32_R5 || CPU_MIPS64_R5 || \ + CPU_MIPS32_R6 || CPU_MIPS64_R6 || \ + CPU_P5600 || CAVIUM_OCTEON_SOC help This builds a kernel image that retains relocation information so it can be loaded someplace besides the default 1MB. @@ -3275,3 +3299,5 @@ endmenu source "drivers/firmware/Kconfig" source "arch/mips/kvm/Kconfig" + +source "arch/mips/vdso/Kconfig" |