diff options
Diffstat (limited to 'arch/arm')
22 files changed, 166 insertions, 144 deletions
diff --git a/arch/arm/boot/compressed/vmlinux.lds.S b/arch/arm/boot/compressed/vmlinux.lds.S index b247f399de71..f82b5962d97e 100644 --- a/arch/arm/boot/compressed/vmlinux.lds.S +++ b/arch/arm/boot/compressed/vmlinux.lds.S @@ -42,7 +42,7 @@ SECTIONS } .table : ALIGN(4) { _table_start = .; - LONG(ZIMAGE_MAGIC(2)) + LONG(ZIMAGE_MAGIC(4)) LONG(ZIMAGE_MAGIC(0x5a534c4b)) LONG(ZIMAGE_MAGIC(__piggy_size_addr - _start)) LONG(ZIMAGE_MAGIC(_kernel_bss_size)) diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 811c8cae315b..d692e3b2812a 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -943,7 +943,7 @@ &cpsw_emac0 { phy-handle = <ðphy0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; }; &elm { diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index 9f66f96d09c9..a958f9ee4a5a 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -504,7 +504,7 @@ &cpsw_emac0 { phy-handle = <ðphy0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; }; &rtc { diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 25222497f828..4d5a7ca2e25d 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -833,13 +833,13 @@ &cpsw_emac0 { phy-handle = <ðphy0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { phy-handle = <ðphy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; dual_emac_res_vlan = <2>; }; diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts index 669559c9c95b..c13756fa0f55 100644 --- a/arch/arm/boot/dts/am571x-idk.dts +++ b/arch/arm/boot/dts/am571x-idk.dts @@ -190,13 +190,13 @@ &cpsw_port1 { phy-handle = <ðphy0_sw>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; ti,dual-emac-pvid = <1>; }; &cpsw_port2 { phy-handle = <ðphy1_sw>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; ti,dual-emac-pvid = <2>; }; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi index a813a0cf3ff3..565675354de4 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi +++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi @@ -433,13 +433,13 @@ &cpsw_emac0 { phy-handle = <&phy0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; dual_emac_res_vlan = <2>; }; diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi index aa5e55f98179..a3ff1237d1fa 100644 --- a/arch/arm/boot/dts/am57xx-idk-common.dtsi +++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi @@ -408,13 +408,13 @@ &cpsw_emac0 { phy-handle = <ðphy0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { phy-handle = <ðphy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; dual_emac_res_vlan = <2>; }; diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi index 6142c672811e..5e5f5ca3c86f 100644 --- a/arch/arm/boot/dts/bcm-hr2.dtsi +++ b/arch/arm/boot/dts/bcm-hr2.dtsi @@ -75,7 +75,7 @@ timer@20200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x20200 0x100>; - interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; clocks = <&periph_clk>; }; @@ -83,7 +83,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0x20600 0x20>; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | - IRQ_TYPE_LEVEL_HIGH)>; + IRQ_TYPE_EDGE_RISING)>; clocks = <&periph_clk>; }; @@ -91,7 +91,7 @@ compatible = "arm,cortex-a9-twd-wdt"; reg = <0x20620 0x20>; interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | - IRQ_TYPE_LEVEL_HIGH)>; + IRQ_TYPE_EDGE_RISING)>; clocks = <&periph_clk>; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts index 4c3f606e5b8d..f65448c01e31 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts @@ -24,7 +24,7 @@ leds { act { - gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; + gpios = <&gpio 47 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index 44ed5a798164..c28ca0540f03 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -693,7 +693,7 @@ davinci_mdio: mdio@800 { compatible = "ti,cpsw-mdio", "ti,davinci_mdio"; - clocks = <&alwon_ethernet_clkctrl DM814_ETHERNET_CPGMAC0_CLKCTRL 0>; + clocks = <&cpsw_125mhz_gclk>; clock-names = "fck"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts index 95b8f2d71821..fb0980190aa0 100644 --- a/arch/arm/boot/dts/imx6q-b450v3.dts +++ b/arch/arm/boot/dts/imx6q-b450v3.dts @@ -65,13 +65,6 @@ }; }; -&clks { - assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, - <&clks IMX6QDL_CLK_LDB_DI1_SEL>; - assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, - <&clks IMX6QDL_CLK_PLL3_USB_OTG>; -}; - &ldb { status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts index 611cb7ae7e55..8f762d9c5ae9 100644 --- a/arch/arm/boot/dts/imx6q-b650v3.dts +++ b/arch/arm/boot/dts/imx6q-b650v3.dts @@ -65,13 +65,6 @@ }; }; -&clks { - assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, - <&clks IMX6QDL_CLK_LDB_DI1_SEL>; - assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, - <&clks IMX6QDL_CLK_PLL3_USB_OTG>; -}; - &ldb { status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts index e4cb118f88c6..1ea64ecf4291 100644 --- a/arch/arm/boot/dts/imx6q-b850v3.dts +++ b/arch/arm/boot/dts/imx6q-b850v3.dts @@ -53,17 +53,6 @@ }; }; -&clks { - assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, - <&clks IMX6QDL_CLK_LDB_DI1_SEL>, - <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>, - <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>; - assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, - <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, - <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, - <&clks IMX6QDL_CLK_PLL2_PFD2_396M>; -}; - &ldb { fsl,dual-channel; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi index fa27dcdf06f1..1938b04199c4 100644 --- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi @@ -377,3 +377,18 @@ #interrupt-cells = <1>; }; }; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>, + <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>, + <&clks IMX6QDL_CLK_IPU1_DI1_PRE_SEL>, + <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>, + <&clks IMX6QDL_CLK_IPU2_DI1_PRE_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, + <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, + <&clks IMX6QDL_CLK_PLL2_PFD0_352M>, + <&clks IMX6QDL_CLK_PLL2_PFD0_352M>, + <&clks IMX6QDL_CLK_PLL2_PFD0_352M>, + <&clks IMX6QDL_CLK_PLL2_PFD0_352M>; +}; diff --git a/arch/arm/boot/dts/mmp3-dell-ariel.dts b/arch/arm/boot/dts/mmp3-dell-ariel.dts index 15449c72c042..b0ec14c42164 100644 --- a/arch/arm/boot/dts/mmp3-dell-ariel.dts +++ b/arch/arm/boot/dts/mmp3-dell-ariel.dts @@ -98,19 +98,19 @@ status = "okay"; }; -&ssp3 { +&ssp1 { status = "okay"; - cs-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; firmware-flash@0 { - compatible = "st,m25p80", "jedec,spi-nor"; + compatible = "winbond,w25q32", "jedec,spi-nor"; reg = <0>; - spi-max-frequency = <40000000>; + spi-max-frequency = <104000000>; m25p,fast-read; }; }; -&ssp4 { - cs-gpios = <&gpio 56 GPIO_ACTIVE_HIGH>; +&ssp2 { + cs-gpios = <&gpio 56 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi index 9b5087a95e73..826f0a577859 100644 --- a/arch/arm/boot/dts/mmp3.dtsi +++ b/arch/arm/boot/dts/mmp3.dtsi @@ -202,8 +202,7 @@ }; hsic_phy0: hsic-phy@f0001800 { - compatible = "marvell,mmp3-hsic-phy", - "usb-nop-xceiv"; + compatible = "marvell,mmp3-hsic-phy"; reg = <0xf0001800 0x40>; #phy-cells = <0>; status = "disabled"; @@ -224,8 +223,7 @@ }; hsic_phy1: hsic-phy@f0002800 { - compatible = "marvell,mmp3-hsic-phy", - "usb-nop-xceiv"; + compatible = "marvell,mmp3-hsic-phy"; reg = <0xf0002800 0x40>; #phy-cells = <0>; status = "disabled"; @@ -531,7 +529,7 @@ }; soc_clocks: clocks@d4050000 { - compatible = "marvell,mmp2-clock"; + compatible = "marvell,mmp3-clock"; reg = <0xd4050000 0x1000>, <0xd4282800 0x400>, <0xd4015000 0x1000>; diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 99929122dad7..3546d294d55f 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -18,11 +18,11 @@ #endif #include <asm/ptrace.h> -#include <asm/domain.h> #include <asm/opcodes-virt.h> #include <asm/asm-offsets.h> #include <asm/page.h> #include <asm/thread_info.h> +#include <asm/uaccess-asm.h> #define IOMEM(x) (x) @@ -446,79 +446,6 @@ THUMB( orr \reg , \reg , #PSR_T_BIT ) .size \name , . - \name .endm - .macro csdb -#ifdef CONFIG_THUMB2_KERNEL - .inst.w 0xf3af8014 -#else - .inst 0xe320f014 -#endif - .endm - - .macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req -#ifndef CONFIG_CPU_USE_DOMAINS - adds \tmp, \addr, #\size - 1 - sbcscc \tmp, \tmp, \limit - bcs \bad -#ifdef CONFIG_CPU_SPECTRE - movcs \addr, #0 - csdb -#endif -#endif - .endm - - .macro uaccess_mask_range_ptr, addr:req, size:req, limit:req, tmp:req -#ifdef CONFIG_CPU_SPECTRE - sub \tmp, \limit, #1 - subs \tmp, \tmp, \addr @ tmp = limit - 1 - addr - addhs \tmp, \tmp, #1 @ if (tmp >= 0) { - subshs \tmp, \tmp, \size @ tmp = limit - (addr + size) } - movlo \addr, #0 @ if (tmp < 0) addr = NULL - csdb -#endif - .endm - - .macro uaccess_disable, tmp, isb=1 -#ifdef CONFIG_CPU_SW_DOMAIN_PAN - /* - * Whenever we re-enter userspace, the domains should always be - * set appropriately. - */ - mov \tmp, #DACR_UACCESS_DISABLE - mcr p15, 0, \tmp, c3, c0, 0 @ Set domain register - .if \isb - instr_sync - .endif -#endif - .endm - - .macro uaccess_enable, tmp, isb=1 -#ifdef CONFIG_CPU_SW_DOMAIN_PAN - /* - * Whenever we re-enter userspace, the domains should always be - * set appropriately. - */ - mov \tmp, #DACR_UACCESS_ENABLE - mcr p15, 0, \tmp, c3, c0, 0 - .if \isb - instr_sync - .endif -#endif - .endm - - .macro uaccess_save, tmp -#ifdef CONFIG_CPU_SW_DOMAIN_PAN - mrc p15, 0, \tmp, c3, c0, 0 - str \tmp, [sp, #SVC_DACR] -#endif - .endm - - .macro uaccess_restore -#ifdef CONFIG_CPU_SW_DOMAIN_PAN - ldr r0, [sp, #SVC_DACR] - mcr p15, 0, r0, c3, c0, 0 -#endif - .endm - .irp c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo .macro ret\c, reg #if __LINUX_ARM_ARCH__ < 6 diff --git a/arch/arm/include/asm/uaccess-asm.h b/arch/arm/include/asm/uaccess-asm.h new file mode 100644 index 000000000000..907571fd05c6 --- /dev/null +++ b/arch/arm/include/asm/uaccess-asm.h @@ -0,0 +1,117 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef __ASM_UACCESS_ASM_H__ +#define __ASM_UACCESS_ASM_H__ + +#include <asm/asm-offsets.h> +#include <asm/domain.h> +#include <asm/memory.h> +#include <asm/thread_info.h> + + .macro csdb +#ifdef CONFIG_THUMB2_KERNEL + .inst.w 0xf3af8014 +#else + .inst 0xe320f014 +#endif + .endm + + .macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req +#ifndef CONFIG_CPU_USE_DOMAINS + adds \tmp, \addr, #\size - 1 + sbcscc \tmp, \tmp, \limit + bcs \bad +#ifdef CONFIG_CPU_SPECTRE + movcs \addr, #0 + csdb +#endif +#endif + .endm + + .macro uaccess_mask_range_ptr, addr:req, size:req, limit:req, tmp:req +#ifdef CONFIG_CPU_SPECTRE + sub \tmp, \limit, #1 + subs \tmp, \tmp, \addr @ tmp = limit - 1 - addr + addhs \tmp, \tmp, #1 @ if (tmp >= 0) { + subshs \tmp, \tmp, \size @ tmp = limit - (addr + size) } + movlo \addr, #0 @ if (tmp < 0) addr = NULL + csdb +#endif + .endm + + .macro uaccess_disable, tmp, isb=1 +#ifdef CONFIG_CPU_SW_DOMAIN_PAN + /* + * Whenever we re-enter userspace, the domains should always be + * set appropriately. + */ + mov \tmp, #DACR_UACCESS_DISABLE + mcr p15, 0, \tmp, c3, c0, 0 @ Set domain register + .if \isb + instr_sync + .endif +#endif + .endm + + .macro uaccess_enable, tmp, isb=1 +#ifdef CONFIG_CPU_SW_DOMAIN_PAN + /* + * Whenever we re-enter userspace, the domains should always be + * set appropriately. + */ + mov \tmp, #DACR_UACCESS_ENABLE + mcr p15, 0, \tmp, c3, c0, 0 + .if \isb + instr_sync + .endif +#endif + .endm + +#if defined(CONFIG_CPU_SW_DOMAIN_PAN) || defined(CONFIG_CPU_USE_DOMAINS) +#define DACR(x...) x +#else +#define DACR(x...) +#endif + + /* + * Save the address limit on entry to a privileged exception. + * + * If we are using the DACR for kernel access by the user accessors + * (CONFIG_CPU_USE_DOMAINS=y), always reset the DACR kernel domain + * back to client mode, whether or not \disable is set. + * + * If we are using SW PAN, set the DACR user domain to no access + * if \disable is set. + */ + .macro uaccess_entry, tsk, tmp0, tmp1, tmp2, disable + ldr \tmp1, [\tsk, #TI_ADDR_LIMIT] + mov \tmp2, #TASK_SIZE + str \tmp2, [\tsk, #TI_ADDR_LIMIT] + DACR( mrc p15, 0, \tmp0, c3, c0, 0) + DACR( str \tmp0, [sp, #SVC_DACR]) + str \tmp1, [sp, #SVC_ADDR_LIMIT] + .if \disable && IS_ENABLED(CONFIG_CPU_SW_DOMAIN_PAN) + /* kernel=client, user=no access */ + mov \tmp2, #DACR_UACCESS_DISABLE + mcr p15, 0, \tmp2, c3, c0, 0 + instr_sync + .elseif IS_ENABLED(CONFIG_CPU_USE_DOMAINS) + /* kernel=client */ + bic \tmp2, \tmp0, #domain_mask(DOMAIN_KERNEL) + orr \tmp2, \tmp2, #domain_val(DOMAIN_KERNEL, DOMAIN_CLIENT) + mcr p15, 0, \tmp2, c3, c0, 0 + instr_sync + .endif + .endm + + /* Restore the user access state previously saved by uaccess_entry */ + .macro uaccess_exit, tsk, tmp0, tmp1 + ldr \tmp1, [sp, #SVC_ADDR_LIMIT] + DACR( ldr \tmp0, [sp, #SVC_DACR]) + str \tmp1, [\tsk, #TI_ADDR_LIMIT] + DACR( mcr p15, 0, \tmp0, c3, c0, 0) + .endm + +#undef DACR + +#endif /* __ASM_UACCESS_ASM_H__ */ diff --git a/arch/arm/kernel/atags_proc.c b/arch/arm/kernel/atags_proc.c index 4247ebf4b893..3c2faf2bd124 100644 --- a/arch/arm/kernel/atags_proc.c +++ b/arch/arm/kernel/atags_proc.c @@ -42,7 +42,7 @@ static int __init init_atags_procfs(void) size_t size; if (tag->hdr.tag != ATAG_CORE) { - pr_info("No ATAGs?"); + pr_info("No ATAGs?\n"); return -EINVAL; } diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 77f54830554c..55a47df04773 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -27,6 +27,7 @@ #include <asm/unistd.h> #include <asm/tls.h> #include <asm/system_info.h> +#include <asm/uaccess-asm.h> #include "entry-header.S" #include <asm/entry-macro-multi.S> @@ -179,15 +180,7 @@ ENDPROC(__und_invalid) stmia r7, {r2 - r6} get_thread_info tsk - ldr r0, [tsk, #TI_ADDR_LIMIT] - mov r1, #TASK_SIZE - str r1, [tsk, #TI_ADDR_LIMIT] - str r0, [sp, #SVC_ADDR_LIMIT] - - uaccess_save r0 - .if \uaccess - uaccess_disable r0 - .endif + uaccess_entry tsk, r0, r1, r2, \uaccess .if \trace #ifdef CONFIG_TRACE_IRQFLAGS diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index 32051ec5b33f..40db0f9188b6 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -6,6 +6,7 @@ #include <asm/asm-offsets.h> #include <asm/errno.h> #include <asm/thread_info.h> +#include <asm/uaccess-asm.h> #include <asm/v7m.h> @ Bad Abort numbers @@ -217,9 +218,7 @@ blne trace_hardirqs_off #endif .endif - ldr r1, [sp, #SVC_ADDR_LIMIT] - uaccess_restore - str r1, [tsk, #TI_ADDR_LIMIT] + uaccess_exit tsk, r0, r1 #ifndef CONFIG_THUMB2_KERNEL @ ARM mode SVC restore @@ -263,9 +262,7 @@ @ on the stack remains correct). @ .macro svc_exit_via_fiq - ldr r1, [sp, #SVC_ADDR_LIMIT] - uaccess_restore - str r1, [tsk, #TI_ADDR_LIMIT] + uaccess_exit tsk, r0, r1 #ifndef CONFIG_THUMB2_KERNEL @ ARM mode restore mov r0, sp diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index b606cded90cd..4cc6a7eff635 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -219,8 +219,8 @@ static struct undef_hook arm_break_hook = { }; static struct undef_hook thumb_break_hook = { - .instr_mask = 0xffff, - .instr_val = 0xde01, + .instr_mask = 0xffffffff, + .instr_val = 0x0000de01, .cpsr_mask = PSR_T_BIT, .cpsr_val = PSR_T_BIT, .fn = break_trap, |