2 files changed, 11 insertions, 69 deletions

diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index bbafa3ccacb5..9181a241d3a8 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -288,6 +288,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	struct device_node *np;
 	void __iomem *base;
 	int i, irq;
+	int ret;
 
 	clk[dummy] = imx_clk_fixed("dummy", 0);
 	clk[ckil] = imx_obtain_fixed_clock("ckil", 0);
@@ -592,6 +593,16 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 		clk_prepare_enable(clk[usbphy2_gate]);
 	}
 
+	/*
+	 * Let's initially set up CLKO with OSC24M, since this configuration
+	 * is widely used by imx6q board designs to clock audio codec.
+	 */
+	ret = clk_set_parent(clk[cko2_sel], clk[osc]);
+	if (!ret)
+		ret = clk_set_parent(clk[cko], clk[cko2]);
+	if (ret)
+		pr_warn("failed to set up CLKO: %d\n", ret);
+
 	/* Set initial power mode */
 	imx6q_set_lpm(WAIT_CLOCKED);
 
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 1e093abe7b95..b60509831d67 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -162,30 +162,6 @@ static int ar8031_phy_fixup(struct phy_device *dev)
 	return 0;
 }
 
-static void __init imx6q_sabrelite_cko1_setup(void)
-{
-	struct clk *cko1_sel, *ahb, *cko1;
-	unsigned long rate;
-
-	cko1_sel = clk_get_sys(NULL, "cko1_sel");
-	ahb = clk_get_sys(NULL, "ahb");
-	cko1 = clk_get_sys(NULL, "cko1");
-	if (IS_ERR(cko1_sel) || IS_ERR(ahb) || IS_ERR(cko1)) {
-		pr_err("cko1 setup failed!\n");
-		goto put_clk;
-	}
-	clk_set_parent(cko1_sel, ahb);
-	rate = clk_round_rate(cko1, 16000000);
-	clk_set_rate(cko1, rate);
-put_clk:
-	if (!IS_ERR(cko1_sel))
-		clk_put(cko1_sel);
-	if (!IS_ERR(ahb))
-		clk_put(ahb);
-	if (!IS_ERR(cko1))
-		clk_put(cko1);
-}
-
 #define PHY_ID_AR8031	0x004dd074
 
 static void __init imx6q_enet_phy_init(void)
@@ -200,45 +176,6 @@ static void __init imx6q_enet_phy_init(void)
 	}
 }
 
-static void __init imx6q_sabresd_cko1_setup(void)
-{
-	struct clk *cko1_sel, *pll4, *pll4_post, *cko1;
-	unsigned long rate;
-
-	cko1_sel = clk_get_sys(NULL, "cko1_sel");
-	pll4 = clk_get_sys(NULL, "pll4_audio");
-	pll4_post = clk_get_sys(NULL, "pll4_post_div");
-	cko1 = clk_get_sys(NULL, "cko1");
-	if (IS_ERR(cko1_sel) || IS_ERR(pll4)
-			|| IS_ERR(pll4_post) || IS_ERR(cko1)) {
-		pr_err("cko1 setup failed!\n");
-		goto put_clk;
-	}
-	/*
-	 * Setting pll4 at 768MHz (24MHz * 32)
-	 * So its child clock can get 24MHz easily
-	 */
-	clk_set_rate(pll4, 768000000);
-
-	clk_set_parent(cko1_sel, pll4_post);
-	rate = clk_round_rate(cko1, 24000000);
-	clk_set_rate(cko1, rate);
-put_clk:
-	if (!IS_ERR(cko1_sel))
-		clk_put(cko1_sel);
-	if (!IS_ERR(pll4_post))
-		clk_put(pll4_post);
-	if (!IS_ERR(pll4))
-		clk_put(pll4);
-	if (!IS_ERR(cko1))
-		clk_put(cko1);
-}
-
-static void __init imx6q_sabresd_init(void)
-{
-	imx6q_sabresd_cko1_setup();
-}
-
 static void __init imx6q_1588_init(void)
 {
 	struct regmap *gpr;
@@ -255,12 +192,6 @@ static void __init imx6q_1588_init(void)
 
 static void __init imx6q_init_machine(void)
 {
-	if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
-		imx6q_sabrelite_cko1_setup();
-	else if (of_machine_is_compatible("fsl,imx6q-sabresd") ||
-			of_machine_is_compatible("fsl,imx6dl-sabresd"))
-		imx6q_sabresd_init();
-
 	imx6q_enet_phy_init();
 
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);