diff options
Diffstat (limited to 'arch/arm/boot/dts/marvell')
4 files changed, 97 insertions, 32 deletions
diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts index 1707d1b01545..cb85f8e31dfc 100644 --- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts +++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts @@ -4,6 +4,18 @@ / { model = "SolidRun Clearfog GTR L8"; + compatible = "solidrun,clearfog-gtr-l8", "marvell,armada385", + "marvell,armada380"; + + /* CON25 */ + sfp1: sfp-1 { + compatible = "sff,sfp"; + pinctrl-0 = <&cf_gtr_sfp1_pins>; + pinctrl-names = "default"; + i2c-bus = <&i2c0>; + mod-def0-gpio = <&gpio0 24 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; + }; }; &mdio { @@ -20,57 +32,65 @@ ethernet-port@1 { reg = <1>; - label = "lan8"; + label = "lan1"; phy-handle = <&switch0phy0>; }; ethernet-port@2 { reg = <2>; - label = "lan7"; + label = "lan2"; phy-handle = <&switch0phy1>; }; ethernet-port@3 { reg = <3>; - label = "lan6"; + label = "lan3"; phy-handle = <&switch0phy2>; }; ethernet-port@4 { reg = <4>; - label = "lan5"; + label = "lan4"; phy-handle = <&switch0phy3>; }; ethernet-port@5 { reg = <5>; - label = "lan4"; + label = "lan5"; phy-handle = <&switch0phy4>; }; ethernet-port@6 { reg = <6>; - label = "lan3"; + label = "lan6"; phy-handle = <&switch0phy5>; }; ethernet-port@7 { reg = <7>; - label = "lan2"; + label = "lan7"; phy-handle = <&switch0phy6>; }; ethernet-port@8 { reg = <8>; - label = "lan1"; + label = "lan8"; phy-handle = <&switch0phy7>; }; + ethernet-port@9 { + reg = <9>; + label = "lan-sfp"; + phy-mode = "sgmii"; + sfp = <&sfp1>; + managed = "in-band-status"; + }; + ethernet-port@10 { reg = <10>; phy-mode = "2500base-x"; - ethernet = <ð1>; + fixed-link { speed = <2500>; full-duplex; diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts index a7678a784c18..5f83d981449a 100644 --- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts +++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts @@ -4,6 +4,8 @@ / { model = "SolidRun Clearfog GTR S4"; + compatible = "solidrun,clearfog-gtr-s4", "marvell,armada385", + "marvell,armada380"; }; &sfp0 { diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi index d1452a04e904..f3a3cb6ac311 100644 --- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi +++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr.dtsi @@ -141,18 +141,13 @@ }; pinctrl@18000 { - cf_gtr_switch_reset_pins: cf-gtr-switch-reset-pins { - marvell,pins = "mpp18"; - marvell,function = "gpio"; - }; - - cf_gtr_usb3_con_vbus: cf-gtr-usb3-con-vbus { - marvell,pins = "mpp22"; + cf_gtr_fan_pwm: cf-gtr-fan-pwm { + marvell,pins = "mpp23"; marvell,function = "gpio"; }; - cf_gtr_fan_pwm: cf-gtr-fan-pwm { - marvell,pins = "mpp23"; + cf_gtr_front_button_pins: cf-gtr-front-button-pins { + marvell,pins = "mpp53"; marvell,function = "gpio"; }; @@ -162,6 +157,37 @@ marvell,function = "i2c1"; }; + cf_gtr_isolation_pins: cf-gtr-isolation-pins { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + + cf_gtr_led_pins: led-pins { + marvell,pins = "mpp42", "mpp52"; + marvell,function = "gpio"; + }; + + cf_gtr_lte_disable_pins: lte-disable-pins { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + + cf_gtr_pci_pins: pci-pins { + // pci reset + marvell,pins = "mpp33", "mpp35", "mpp44"; + marvell,function = "gpio"; + }; + + cf_gtr_poe_reset_pins: cf-gtr-poe-reset-pins { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + + cf_gtr_rear_button_pins: cf-gtr-rear-button-pins { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + cf_gtr_sdhci_pins: cf-gtr-sdhci-pins { marvell,pins = "mpp21", "mpp28", "mpp37", "mpp38", @@ -169,13 +195,15 @@ marvell,function = "sd0"; }; - cf_gtr_isolation_pins: cf-gtr-isolation-pins { - marvell,pins = "mpp47"; + cf_gtr_sfp0_pins: sfp0-pins { + /* sfp modabs, txdisable */ + marvell,pins = "mpp25", "mpp46"; marvell,function = "gpio"; }; - cf_gtr_poe_reset_pins: cf-gtr-poe-reset-pins { - marvell,pins = "mpp48"; + cf_gtr_sfp1_pins: sfp1-pins { + /* sfp modabs, txdisable */ + marvell,pins = "mpp24", "mpp54"; marvell,function = "gpio"; }; @@ -184,13 +212,18 @@ marvell,function = "spi1"; }; - cf_gtr_front_button_pins: cf-gtr-front-button-pins { - marvell,pins = "mpp53"; + cf_gtr_switch_reset_pins: cf-gtr-switch-reset-pins { + marvell,pins = "mpp18"; marvell,function = "gpio"; }; - cf_gtr_rear_button_pins: cf-gtr-rear-button-pins { - marvell,pins = "mpp36"; + cf_gtr_usb3_con_vbus: cf-gtr-usb3-con-vbus { + marvell,pins = "mpp22"; + marvell,function = "gpio"; + }; + + cf_gtr_wifi_disable_pins: wifi-disable-pins { + marvell,pins = "mpp30", "mpp31"; marvell,function = "gpio"; }; }; @@ -221,21 +254,26 @@ }; pcie { + pinctrl-0 = <&cf_gtr_pci_pins>; + pinctrl-names = "default"; status = "okay"; /* * The PCIe units are accessible through * the mini-PCIe connectors on the board. */ + /* CON3 - serdes 0 */ pcie@1,0 { reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; status = "okay"; }; + /* CON4 - serdes 2 */ pcie@2,0 { reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; status = "okay"; }; + /* CON2 - serdes 4 */ pcie@3,0 { reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; status = "okay"; @@ -243,10 +281,12 @@ }; }; - sfp0: sfp { + /* CON5 */ + sfp0: sfp-0 { compatible = "sff,sfp"; + pinctrl-0 = <&cf_gtr_sfp0_pins>; + pinctrl-names = "default"; i2c-bus = <&i2c1>; - los-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; mod-def0-gpio = <&gpio0 25 GPIO_ACTIVE_LOW>; tx-disable-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; }; @@ -273,6 +313,8 @@ gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = <&cf_gtr_led_pins>; + pinctrl-names = "default"; led1 { function = LED_FUNCTION_CPU; @@ -408,7 +450,7 @@ }; &gpio0 { - pinctrl-0 = <&cf_gtr_fan_pwm>; + pinctrl-0 = <&cf_gtr_fan_pwm &cf_gtr_wifi_disable_pins>; pinctrl-names = "default"; wifi-disable { @@ -420,7 +462,7 @@ }; &gpio1 { - pinctrl-0 = <&cf_gtr_isolation_pins &cf_gtr_poe_reset_pins>; + pinctrl-0 = <&cf_gtr_isolation_pins &cf_gtr_poe_reset_pins &cf_gtr_lte_disable_pins>; pinctrl-names = "default"; lte-disable { diff --git a/arch/arm/boot/dts/marvell/armada-388-clearfog.dts b/arch/arm/boot/dts/marvell/armada-388-clearfog.dts index 3290ccad2374..09bf2e6d4ed0 100644 --- a/arch/arm/boot/dts/marvell/armada-388-clearfog.dts +++ b/arch/arm/boot/dts/marvell/armada-388-clearfog.dts @@ -10,8 +10,9 @@ / { model = "SolidRun Clearfog A1"; - compatible = "solidrun,clearfog-a1", "marvell,armada388", - "marvell,armada385", "marvell,armada380"; + compatible = "solidrun,clearfog-pro-a1", "solidrun,clearfog-a1", + "marvell,armada388", "marvell,armada385", + "marvell,armada380"; soc { internal-regs { |