2 files changed, 41 insertions, 0 deletions
diff --git a/Documentation/networking/devlink/ice.rst b/Documentation/networking/devlink/ice.rst
index 830c04354222..e3972d03cea0 100644
--- a/Documentation/networking/devlink/ice.rst
+++ b/Documentation/networking/devlink/ice.rst
@@ -11,6 +11,7 @@ Parameters
 ==========
 
 .. list-table:: Generic parameters implemented
+   :widths: 5 5 90
 
    * - Name
      - Mode
@@ -68,6 +69,30 @@ Parameters
 
        To verify that value has been set:
        $ devlink dev param show pci/0000:16:00.0 name tx_scheduling_layers
+.. list-table:: Driver specific parameters implemented
+    :widths: 5 5 90
+
+    * - Name
+      - Mode
+      - Description
+    * - ``local_forwarding``
+      - runtime
+      - Controls loopback behavior by tuning scheduler bandwidth.
+        It impacts all kinds of functions: physical, virtual and
+        subfunctions.
+        Supported values are:
+
+        ``enabled`` - loopback traffic is allowed on port
+
+        ``disabled`` - loopback traffic is not allowed on this port
+
+        ``prioritized`` - loopback traffic is prioritized on this port
+
+        Default value of ``local_forwarding`` parameter is ``enabled``.
+        ``prioritized`` provides ability to adjust loopback traffic rate to increase
+        one port capacity at cost of the another. User needs to disable
+        local forwarding on one of the ports in order have increased capacity
+        on the ``prioritized`` port.
 
 Info versions
 =============
diff --git a/Documentation/networking/devlink/octeontx2.rst b/Documentation/networking/devlink/octeontx2.rst
index 610de99b728a..d33a90dd44bf 100644
--- a/Documentation/networking/devlink/octeontx2.rst
+++ b/Documentation/networking/devlink/octeontx2.rst
@@ -40,3 +40,19 @@ The ``octeontx2 AF`` driver implements the following driver-specific parameters.
      - runtime
      - Use to set the quantum which hardware uses for scheduling among transmit queues.
        Hardware uses weighted DWRR algorithm to schedule among all transmit queues.
+
+The ``octeontx2 PF`` driver implements the following driver-specific parameters.
+
+.. list-table:: Driver-specific parameters implemented
+   :widths: 5 5 5 85
+
+   * - Name
+     - Type
+     - Mode
+     - Description
+   * - ``unicast_filter_count``
+     - u8
+     - runtime
+     - Set the maximum number of unicast filters that can be programmed for
+       the device. This can be used to achieve better device resource
+       utilization, avoiding over consumption of unused MCAM table entries.