diff options
Diffstat (limited to 'Documentation/devicetree')
36 files changed, 97 insertions, 97 deletions
diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml index 0a66338c7e5a..17250378542a 100644 --- a/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml @@ -10,7 +10,7 @@ maintainers: - Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> allOf: - - $ref: "regulator.yaml#" + - $ref: regulator.yaml# properties: compatible: @@ -19,43 +19,43 @@ properties: regulator-name: true anatop-reg-offset: - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: u32 value representing the anatop MFD register offset. anatop-vol-bit-shift: - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: u32 value representing the bit shift for the register. anatop-vol-bit-width: - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: u32 value representing the number of bits used in the register. anatop-min-bit-val: - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: u32 value representing the minimum value of this register. anatop-min-voltage: - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: u32 value representing the minimum voltage of this regulator. anatop-max-voltage: - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: u32 value representing the maximum voltage of this regulator. anatop-delay-reg-offset: - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: u32 value representing the anatop MFD step time register offset. anatop-delay-bit-shift: - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: u32 value representing the bit shift for the step time register. anatop-delay-bit-width: - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: u32 value representing the number of bits used in the step time register. anatop-enable-bit: - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: u32 value representing regulator enable bit offset. vin-supply: diff --git a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml index 63e1161a87de..dc626517c2ad 100644 --- a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml +++ b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml @@ -109,7 +109,7 @@ properties: description: Specify a valid GPIO for platform control of the regulator dlg,ripple-cancel: - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 0, 1, 2, 3 ] description: | Defined in include/dt-bindings/regulator/dlg,da9121-regulator.h diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml index 48af7cba4652..ac0281b1cceb 100644 --- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml @@ -17,7 +17,7 @@ description: to be the same. allOf: - - $ref: "regulator.yaml#" + - $ref: regulator.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml b/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml index 0921f012c901..e0ff5012b763 100644 --- a/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml @@ -14,7 +14,7 @@ description: regulator.yaml, can also be used. allOf: - - $ref: "regulator.yaml#" + - $ref: regulator.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml index 6c3371d706bb..f4c1f36e52e9 100644 --- a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml @@ -15,7 +15,7 @@ description: regulator.txt, can also be used. allOf: - - $ref: "regulator.yaml#" + - $ref: regulator.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml index 01b9775a92d1..27d5e9c2bb93 100644 --- a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml @@ -25,7 +25,7 @@ properties: patternProperties: "^regulator-(ldo|sbb[0-2])$": - $ref: "regulator.yaml#" + $ref: regulator.yaml# unevaluatedProperties: false required: diff --git a/Documentation/devicetree/bindings/regulator/max8660.yaml b/Documentation/devicetree/bindings/regulator/max8660.yaml index 35792a927b03..f05f4644c8ee 100644 --- a/Documentation/devicetree/bindings/regulator/max8660.yaml +++ b/Documentation/devicetree/bindings/regulator/max8660.yaml @@ -25,7 +25,7 @@ properties: patternProperties: "^regulator-.+$": - $ref: "regulator.yaml#" + $ref: regulator.yaml# unevaluatedProperties: false additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/max8893.yaml b/Documentation/devicetree/bindings/regulator/max8893.yaml index 2b5e977bf409..e40ee798e198 100644 --- a/Documentation/devicetree/bindings/regulator/max8893.yaml +++ b/Documentation/devicetree/bindings/regulator/max8893.yaml @@ -25,7 +25,7 @@ properties: patternProperties: "^(ldo[1-5]|buck)$": - $ref: "regulator.yaml#" + $ref: regulator.yaml# additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml index 771cc134393c..79e5198e1c73 100644 --- a/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml @@ -18,7 +18,7 @@ description: | patternProperties: "^buck-v(core2|io18|dvfs11|dvfs12|dvfs13|dvfs14)$": type: object - $ref: "regulator.yaml#" + $ref: regulator.yaml# properties: regulator-name: @@ -28,7 +28,7 @@ patternProperties: "^ldo-v(avdd32aud|auxa32)$": type: object - $ref: "regulator.yaml#" + $ref: regulator.yaml# properties: regulator-name: @@ -38,7 +38,7 @@ patternProperties: "^ldo-v(dig18|emc33|ibr|mc|mch|mipi|rtc|sram|usb10)$": type: object - $ref: "regulator.yaml#" + $ref: regulator.yaml# properties: regulator-name: @@ -48,7 +48,7 @@ patternProperties: "^ldo-vcam(a|af|d|io)$": type: object - $ref: "regulator.yaml#" + $ref: regulator.yaml# properties: regulator-name: @@ -58,7 +58,7 @@ patternProperties: "^ldo-vtcxo[12]$": type: object - $ref: "regulator.yaml#" + $ref: regulator.yaml# properties: regulator-name: @@ -71,7 +71,7 @@ patternProperties: "^ldo-vgp[1234]$": type: object - $ref: "regulator.yaml#" + $ref: regulator.yaml# properties: regulator-name: diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml index 3218f43e6957..2eb512c29a0d 100644 --- a/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml @@ -18,7 +18,7 @@ description: | patternProperties: "^buck-v(dram|dvfs2|pa|rf18a|rf18b|sbst)$": type: object - $ref: "regulator.yaml#" + $ref: regulator.yaml# properties: regulator-name: @@ -28,7 +28,7 @@ patternProperties: "^ldo-v(bif28|dig18|sram|usb33)$": type: object - $ref: "regulator.yaml#" + $ref: regulator.yaml# properties: regulator-name: diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml index 7023c597c3ed..2e720d152890 100644 --- a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml +++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml @@ -28,11 +28,11 @@ properties: patternProperties: "^buck[1-4]$": - $ref: "regulator.yaml#" + $ref: regulator.yaml# type: object "^ldo[1-4]$": - $ref: "regulator.yaml#" + $ref: regulator.yaml# type: object additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml index 9245b7199439..374a4f6b1e23 100644 --- a/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml +++ b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml @@ -28,7 +28,7 @@ properties: mps,fb-voltage-divider: description: An array of two integers containing the resistor values R1 and R2 of the feedback voltage divider in kilo ohms. - $ref: "/schemas/types.yaml#/definitions/uint32-array" + $ref: /schemas/types.yaml#/definitions/uint32-array maxItems: 2 mps,switch-frequency-hz: diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml index c2e8c54e5311..f3fcfc8be72f 100644 --- a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml +++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml @@ -29,7 +29,7 @@ properties: properties: mps,switch-freq: - $ref: "/schemas/types.yaml#/definitions/uint8" + $ref: /schemas/types.yaml#/definitions/uint8 enum: [0, 1, 2, 3] default: 2 description: | @@ -51,14 +51,14 @@ properties: properties: mps,buck-softstart: - $ref: "/schemas/types.yaml#/definitions/uint8" + $ref: /schemas/types.yaml#/definitions/uint8 enum: [0, 1, 2, 3] description: | defines the soft start time of this buck, must be one of the following corresponding values 150us, 300us, 610us, 920us mps,buck-phase-delay: - $ref: "/schemas/types.yaml#/definitions/uint8" + $ref: /schemas/types.yaml#/definitions/uint8 enum: [0, 1, 2, 3] description: | defines the phase delay of this buck, must be one of the following diff --git a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml index 364b58730be2..6317daf76d1f 100644 --- a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml @@ -28,7 +28,7 @@ properties: patternProperties: "^vbuck[1-4]$": type: object - $ref: "regulator.yaml#" + $ref: regulator.yaml# unevaluatedProperties: false properties: diff --git a/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml index 8cc413eb482d..d6b3b5a5c0b3 100644 --- a/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml @@ -17,7 +17,7 @@ description: | patternProperties: "^buck_v(s1|gpu11|modem|pu|core|s2|pa|proc2|proc1|core_sshub)$": type: object - $ref: "regulator.yaml#" + $ref: regulator.yaml# properties: regulator-name: @@ -27,7 +27,7 @@ patternProperties: "^ldo_v(ibr|rf12|usb|camio|efuse|xo22)$": type: object - $ref: "regulator.yaml#" + $ref: regulator.yaml# properties: regulator-name: @@ -37,7 +37,7 @@ patternProperties: "^ldo_v(rfck|emc|a12|a09|ufs|bbck)$": type: object - $ref: "regulator.yaml#" + $ref: regulator.yaml# properties: regulator-name: @@ -47,7 +47,7 @@ patternProperties: "^ldo_vcn(18|13|33_1_bt|13_1_wifi|33_2_bt|33_2_wifi)$": type: object - $ref: "regulator.yaml#" + $ref: regulator.yaml# properties: regulator-name: @@ -57,7 +57,7 @@ patternProperties: "^ldo_vsram_(proc2|others|md|proc1|others_sshub)$": type: object - $ref: "regulator.yaml#" + $ref: regulator.yaml# properties: regulator-name: @@ -67,7 +67,7 @@ patternProperties: "^ldo_v(fe|bif|io)28$": type: object - $ref: "regulator.yaml#" + $ref: regulator.yaml# properties: regulator-name: @@ -77,7 +77,7 @@ patternProperties: "^ldo_v(aud|io|aux|rf|m)18$": type: object - $ref: "regulator.yaml#" + $ref: regulator.yaml# properties: regulator-name: @@ -87,7 +87,7 @@ patternProperties: "^ldo_vsim[12]$": type: object - $ref: "regulator.yaml#" + $ref: regulator.yaml# properties: regulator-name: diff --git a/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml index 8a0931dc2f30..9c879bc3c360 100644 --- a/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml @@ -26,11 +26,11 @@ properties: patternProperties: "^buck[12]$": - $ref: "regulator.yaml#" + $ref: regulator.yaml# unevaluatedProperties: false "^ldo[123567]$": - $ref: "regulator.yaml#" + $ref: regulator.yaml# unevaluatedProperties: false required: diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml index 835b53302db8..d2383e523875 100644 --- a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml @@ -57,7 +57,7 @@ properties: properties: nxp,dvs-run-voltage: - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 600000 maximum: 2187500 description: @@ -65,7 +65,7 @@ properties: dvs(dynamic voltage scaling) property. nxp,dvs-standby-voltage: - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 600000 maximum: 2187500 description: diff --git a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml index aabf50f5b39e..8c0f37d8d082 100644 --- a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml @@ -59,7 +59,7 @@ properties: should be "buck1", ..., "buck7" nxp,ilim-ma: - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 2100 maximum: 4500 deprecated: true @@ -75,7 +75,7 @@ properties: 4500 nxp,phase-shift: - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 default: 0 enum: [ 0, 45, 90, 135, 180, 225, 270, 315 ] description: diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.yaml b/Documentation/devicetree/bindings/regulator/pfuze100.yaml index a26bbd68b729..67a30b23b92c 100644 --- a/Documentation/devicetree/bindings/regulator/pfuze100.yaml +++ b/Documentation/devicetree/bindings/regulator/pfuze100.yaml @@ -63,19 +63,19 @@ properties: patternProperties: "^sw([1-4]|[1-4][a-c]|[1-4][a-c][a-c])$": - $ref: "regulator.yaml#" + $ref: regulator.yaml# type: object "^vgen[1-6]$": - $ref: "regulator.yaml#" + $ref: regulator.yaml# type: object "^vldo[1-4]$": - $ref: "regulator.yaml#" + $ref: regulator.yaml# type: object "^(vsnvs|vref|vrefddr|swbst|coin|v33|vccsd)$": - $ref: "regulator.yaml#" + $ref: regulator.yaml# type: object additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml index 297a75069f60..a765837dc069 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml @@ -105,18 +105,18 @@ properties: bob: type: object - $ref: "regulator.yaml#" + $ref: regulator.yaml# description: BOB regulator node. dependencies: - regulator-allow-set-load: ["regulator-allowed-modes"] + regulator-allow-set-load: [ regulator-allowed-modes ] patternProperties: "^(smps|ldo|lvs|bob)[0-9]+$": type: object - $ref: "regulator.yaml#" + $ref: regulator.yaml# description: smps/ldo regulator nodes(s). dependencies: - regulator-allow-set-load: ["regulator-allowed-modes"] + regulator-allow-set-load: [ regulator-allowed-modes ] required: - compatible diff --git a/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml index 0ae25d119b6f..41678400e63f 100644 --- a/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml @@ -15,7 +15,7 @@ description: | and control the backlight. allOf: - - $ref: "regulator.yaml#" + - $ref: regulator.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml index 53b81d8a2d41..e158c2d3d3f9 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/regulator.yaml @@ -13,7 +13,7 @@ maintainers: properties: regulator-name: description: A string used as a descriptive name for regulator outputs - $ref: "/schemas/types.yaml#/definitions/string" + $ref: /schemas/types.yaml#/definitions/string regulator-min-microvolt: description: smallest voltage consumers may set @@ -23,7 +23,7 @@ properties: regulator-microvolt-offset: description: Offset applied to voltages to compensate for voltage drops - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 regulator-min-microamp: description: smallest current consumers may set @@ -59,7 +59,7 @@ properties: description: ramp delay for regulator(in uV/us) For hardware which supports disabling ramp rate, it should be explicitly initialised to zero (regulator-ramp-delay = <0>) for disabling ramp delay. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 regulator-enable-ramp-delay: description: The time taken, in microseconds, for the supply rail to @@ -68,7 +68,7 @@ properties: required due to the combination of internal ramping of the regulator itself, and board design issues such as trace capacitance and load on the supply. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 regulator-settling-time-us: description: Settling time, in microseconds, for voltage change if regulator @@ -95,7 +95,7 @@ properties: description: initial operating mode. The set of possible operating modes depends on the capabilities of every hardware so each device binding documentation explains which values the regulator supports. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 regulator-allowed-modes: description: list of operating modes that software is allowed to configure @@ -103,12 +103,12 @@ properties: The set of possible operating modes depends on the capabilities of every hardware so each device binding document explains which values the regulator supports. - $ref: "/schemas/types.yaml#/definitions/uint32-array" + $ref: /schemas/types.yaml#/definitions/uint32-array regulator-system-load: description: Load in uA present on regulator that is not captured by any consumer request. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 regulator-pull-down: description: Enable pull down resistor when the regulator is disabled. @@ -206,14 +206,14 @@ properties: 0: Disable active discharge. 1: Enable active discharge. Absence of this property will leave configuration to default. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] regulator-coupled-with: description: Regulators with which the regulator is coupled. The linkage is 2-way - all coupled regulators should be linked with each other. A regulator should not be coupled with its supplier. - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: /schemas/types.yaml#/definitions/phandle-array items: maxItems: 1 @@ -221,7 +221,7 @@ properties: description: Array of maximum spread between voltages of coupled regulators in microvolts, each value in the array relates to the corresponding couple specified by the regulator-coupled-with property. - $ref: "/schemas/types.yaml#/definitions/uint32-array" + $ref: /schemas/types.yaml#/definitions/uint32-array regulator-max-step-microvolt: description: Maximum difference between current and target voltages @@ -269,7 +269,7 @@ patternProperties: of possible operating modes depends on the capabilities of every hardware so the valid modes are documented on each regulator device tree binding document. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 additionalProperties: false diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml index e983d0e70c9b..b73762e151bb 100644 --- a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml @@ -32,7 +32,7 @@ properties: maxItems: 1 richtek,oc-level-select: - $ref: "/schemas/types.yaml#/definitions/uint8" + $ref: /schemas/types.yaml#/definitions/uint8 enum: [0, 1, 2, 3] description: | Over current level selection. Each respective value means the current @@ -40,7 +40,7 @@ properties: in chip default. richtek,ot-level-select: - $ref: "/schemas/types.yaml#/definitions/uint8" + $ref: /schemas/types.yaml#/definitions/uint8 enum: [0, 1, 2] description: | Over temperature level selection. Each respective value means the degree @@ -48,7 +48,7 @@ properties: default. richtek,pgdly-time-select: - $ref: "/schemas/types.yaml#/definitions/uint8" + $ref: /schemas/types.yaml#/definitions/uint8 enum: [0, 1, 2, 3] description: | Power good signal delay time selection. Each respective value means the @@ -57,7 +57,7 @@ properties: richtek,switch-freq-select: - $ref: "/schemas/types.yaml#/definitions/uint8" + $ref: /schemas/types.yaml#/definitions/uint8 enum: [0, 1, 2] description: | Buck switch frequency selection. Each respective value means 400KHz, diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml index a8ccb5cb8d77..446ec5127d1f 100644 --- a/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml @@ -120,7 +120,7 @@ properties: lsw: description: load switch current regulator description. type: object - $ref: "regulator.yaml#" + $ref: regulator.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml index 027fab3dc181..cc4ceb32e9d6 100644 --- a/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml @@ -56,7 +56,7 @@ patternProperties: PMIC "RUN" state voltage in uV when PMIC HW states are used. See comments below for bucks/LDOs which support this. 0 means regulator should be disabled at RUN state. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 3300000 @@ -67,7 +67,7 @@ patternProperties: keeps regulator enabled. BD71815 does not change voltage level when PMIC transitions to SNVS.SNVS voltage depends on the previous state (from which the PMIC transitioned to SNVS). - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 3300000 @@ -76,7 +76,7 @@ patternProperties: PMIC "SUSPEND" state voltage in uV when PMIC HW states are used. See comments below for bucks/LDOs which support this. 0 means regulator should be disabled at SUSPEND state. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 3300000 @@ -85,7 +85,7 @@ patternProperties: PMIC "LPSR" state voltage in uV when PMIC HW states are used. See comments below for bucks/LDOs which support this. 0 means regulator should be disabled at LPSR state. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 3300000 diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml index 3cbe3b76ccee..19b253c09e97 100644 --- a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml @@ -52,7 +52,7 @@ patternProperties: description: PMIC default "RUN" state voltage in uV. See below table for bucks which support this. 0 means disabled. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 3300000 @@ -60,7 +60,7 @@ patternProperties: description: PMIC default "IDLE" state voltage in uV. See below table for bucks which support this. 0 means disabled. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 3300000 @@ -68,7 +68,7 @@ patternProperties: description: PMIC default "SUSPEND" state voltage in uV. See below table for bucks which support this. 0 means disabled. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 3300000 @@ -76,7 +76,7 @@ patternProperties: description: PMIC default "LPSR" state voltage in uV. See below table for bucks which support this. 0 means disabled. - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 3300000 diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml index ab842817d847..6e693fee3493 100644 --- a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml @@ -55,7 +55,7 @@ patternProperties: should be "buck1", ..., "buck8" rohm,dvs-run-voltage: - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1300000 description: @@ -63,7 +63,7 @@ patternProperties: bucks which support this. 0 means disabled. rohm,dvs-idle-voltage: - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1300000 description: @@ -71,7 +71,7 @@ patternProperties: bucks which support this. 0 means disabled. rohm,dvs-suspend-voltage: - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1300000 description: diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml index 65fc3d15f693..1d3dcfba58b0 100644 --- a/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml @@ -54,7 +54,7 @@ patternProperties: should be "buck1", ..., "buck6" rohm,dvs-run-voltage: - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1300000 description: @@ -62,7 +62,7 @@ patternProperties: bucks which support this. 0 means disabled. rohm,dvs-idle-voltage: - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1300000 description: @@ -70,7 +70,7 @@ patternProperties: bucks which support this. 0 means disabled. rohm,dvs-suspend-voltage: - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1300000 description: diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml index 89b8592db81d..f573128da06f 100644 --- a/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml @@ -25,7 +25,7 @@ patternProperties: type: object description: Properties for single regulator. - $ref: "regulator.yaml#" + $ref: regulator.yaml# properties: rohm,ocw-fet-ron-micro-ohms: diff --git a/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml index a6949a581cd1..ddaa112252e5 100644 --- a/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml @@ -42,7 +42,7 @@ properties: reset-names: true allOf: - - $ref: "regulator.yaml#" + - $ref: regulator.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml index c82f6f885d97..c863100f6e7d 100644 --- a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml +++ b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml @@ -14,7 +14,7 @@ description: | to supply ADC analog input switches. allOf: - - $ref: "regulator.yaml#" + - $ref: regulator.yaml# properties: compatible: @@ -23,7 +23,7 @@ properties: - st,stm32mp1-booster st,syscfg: - $ref: "/schemas/types.yaml#/definitions/phandle" + $ref: /schemas/types.yaml#/definitions/phandle description: phandle to system configuration controller. vdda-supply: diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml index c1bf1f90490a..05f4ad2c7d3a 100644 --- a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml +++ b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml @@ -15,7 +15,7 @@ maintainers: - Fabrice Gasnier <fabrice.gasnier@foss.st.com> allOf: - - $ref: "regulator.yaml#" + - $ref: regulator.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml index bd07b9c81570..7d53cfa2c288 100644 --- a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml +++ b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml @@ -26,7 +26,7 @@ patternProperties: "^(reg11|reg18|usb33)$": type: object - $ref: "regulator.yaml#" + $ref: regulator.yaml# required: - compatible diff --git a/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml b/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml index 12aeddedde05..90c39275c150 100644 --- a/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml +++ b/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml @@ -19,7 +19,7 @@ description: | https://www.ti.com/lit/gpn/tps62360 allOf: - - $ref: "regulator.yaml#" + - $ref: regulator.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml index dd7a2f92634c..3b16a25ba3b8 100644 --- a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml @@ -15,7 +15,7 @@ description: | controller is also embedded. allOf: - - $ref: "regulator.yaml#" + - $ref: regulator.yaml# properties: compatible: diff --git a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml index 7b4ae5d23351..011819c10988 100644 --- a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml +++ b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml @@ -21,19 +21,19 @@ properties: wlf,ldoena: description: GPIO specifier for the GPIO controlling LDOENA. - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: /schemas/types.yaml#/definitions/phandle-array maxItems: 1 ldo1: description: Initial data for the LDO1 regulator. - $ref: "regulator.yaml#" + $ref: regulator.yaml# type: object micvdd: description: Initial data for the MICVDD regulator. - $ref: "regulator.yaml#" + $ref: regulator.yaml# type: object additionalProperties: true |