diff options
Diffstat (limited to 'Documentation/devicetree/bindings/thermal')
31 files changed, 298 insertions, 286 deletions
diff --git a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml index 6b3aea6d73b0..dad8de900495 100644 --- a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml +++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml @@ -10,6 +10,8 @@ maintainers: - Vasily Khoruzhick <anarsoul@gmail.com> - Yangtao Li <tiny.windzz@gmail.com> +$ref: thermal-sensor.yaml# + properties: compatible: enum: @@ -55,7 +57,6 @@ properties: maxItems: 1 description: phandle to device controlling temperate offset SYS_CFG register - # See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for details "#thermal-sensor-cells": enum: - 0 @@ -135,9 +136,8 @@ required: - compatible - reg - interrupts - - '#thermal-sensor-cells' -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml index 01fccdfc4178..725303e1a364 100644 --- a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml @@ -11,6 +11,8 @@ maintainers: description: Binding for Amlogic Thermal +$ref: thermal-sensor.yaml# + properties: compatible: oneOf: @@ -44,17 +46,17 @@ required: - clocks - amlogic,ao-secure -additionalProperties: false +unevaluatedProperties: false examples: - | - cpu_temp: temperature-sensor@ff634800 { - compatible = "amlogic,g12a-cpu-thermal", - "amlogic,g12a-thermal"; - reg = <0xff634800 0x50>; - interrupts = <0x0 0x24 0x0>; - clocks = <&clk 164>; - #thermal-sensor-cells = <0>; - amlogic,ao-secure = <&sec_AO>; - }; + temperature-sensor@ff634800 { + compatible = "amlogic,g12a-cpu-thermal", + "amlogic,g12a-thermal"; + reg = <0xff634800 0x50>; + interrupts = <0x0 0x24 0x0>; + clocks = <&clk 164>; + #thermal-sensor-cells = <0>; + amlogic,ao-secure = <&sec_AO>; + }; ... diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml index 89a2c32c0ab2..29a9844e8b48 100644 --- a/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml @@ -19,30 +19,30 @@ description: |+ Refer to the bindings described in Documentation/devicetree/bindings/mfd/syscon.yaml +$ref: thermal-sensor.yaml# + properties: compatible: const: brcm,bcm2711-thermal - # See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for details "#thermal-sensor-cells": const: 0 required: - compatible - - '#thermal-sensor-cells' -additionalProperties: false +unevaluatedProperties: false examples: - | - avs-monitor@7d5d2000 { - compatible = "brcm,bcm2711-avs-monitor", - "syscon", "simple-mfd"; - reg = <0x7d5d2000 0xf00>; - - thermal: thermal { - compatible = "brcm,bcm2711-thermal"; - #thermal-sensor-cells = <0>; - }; + avs-monitor@7d5d2000 { + compatible = "brcm,bcm2711-avs-monitor", + "syscon", "simple-mfd"; + reg = <0x7d5d2000 0xf00>; + + thermal: thermal { + compatible = "brcm,bcm2711-thermal"; + #thermal-sensor-cells = <0>; }; + }; ... diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml index 267a0f423504..081486b44382 100644 --- a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml +++ b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml @@ -42,15 +42,14 @@ additionalProperties: false required: - compatible - reg - - "#thermal-sensor-cells" examples: - | - thermal@f04d1500 { - compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-tmon"; - reg = <0xf04d1500 0x28>; - interrupts = <0x6>; - interrupt-names = "tmon"; - interrupt-parent = <&avs_host_l2_intc>; - #thermal-sensor-cells = <0>; - }; + thermal@f04d1500 { + compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-tmon"; + reg = <0xf04d1500 0x28>; + interrupts = <0x6>; + interrupt-names = "tmon"; + interrupt-parent = <&avs_host_l2_intc>; + #thermal-sensor-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml index 2b6026d9fbcf..ddf0f20e5285 100644 --- a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml @@ -34,7 +34,6 @@ required: - compatible - reg - clocks - - '#thermal-sensor-cells' examples: - | diff --git a/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml b/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml index e02d04d4f71e..ceef318668bf 100644 --- a/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml @@ -28,7 +28,6 @@ properties: required: - compatible - - '#thermal-sensor-cells' additionalProperties: false diff --git a/Documentation/devicetree/bindings/thermal/generic-adc-thermal.yaml b/Documentation/devicetree/bindings/thermal/generic-adc-thermal.yaml index f1fc3b0d8608..12e6418dc24d 100644 --- a/Documentation/devicetree/bindings/thermal/generic-adc-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/generic-adc-thermal.yaml @@ -15,6 +15,8 @@ description: sensor resistor. The voltage read across the sensor is mapped to temperature using voltage-temperature lookup table. +$ref: thermal-sensor.yaml# + properties: compatible: const: generic-adc-thermal @@ -44,11 +46,10 @@ properties: required: - compatible - - '#thermal-sensor-cells' - io-channels - io-channel-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/thermal/hisilicon,tsensor.yaml b/Documentation/devicetree/bindings/thermal/hisilicon,tsensor.yaml new file mode 100644 index 000000000000..11aca2b749d7 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/hisilicon,tsensor.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/hisilicon,tsensor.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Temperature Sensor on HiSilicon SoCs + +maintainers: + - Abdulrasaq Lawani <abdulrasaqolawani@gmail.com> + +allOf: + - $ref: thermal-sensor.yaml + +properties: + compatible: + enum: + - hisilicon,tsensor + - hisilicon,hi3660-tsensor + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: thermal_clk + + interrupts: + maxItems: 1 + + '#thermal-sensor-cells': + const: 1 + +required: + - compatible + - reg + - interrupts + - '#thermal-sensor-cells' + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/hi6220-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + temperature-sensor@f7030700 { + compatible = "hisilicon,tsensor"; + reg = <0xf7030700 0x1000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sys_ctrl HI6220_TSENSOR_CLK>; + clock-names = "thermal_clk"; + #thermal-sensor-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt b/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt deleted file mode 100644 index 4b19d80e6558..000000000000 --- a/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt +++ /dev/null @@ -1,32 +0,0 @@ -* Temperature Sensor on hisilicon SoCs - -** Required properties : - -- compatible: "hisilicon,tsensor". -- reg: physical base address of thermal sensor and length of memory mapped - region. -- interrupt: The interrupt number to the cpu. Defines the interrupt used - by /SOCTHERM/tsensor. -- clock-names: Input clock name, should be 'thermal_clk'. -- clocks: phandles for clock specified in "clock-names" property. -- #thermal-sensor-cells: Should be 1. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description. - -Example : - -for Hi6220: - tsensor: tsensor@0,f7030700 { - compatible = "hisilicon,tsensor"; - reg = <0x0 0xf7030700 0x0 0x1000>; - interrupts = <0 7 0x4>; - clocks = <&sys_ctrl HI6220_TSENSOR_CLK>; - clock-names = "thermal_clk"; - #thermal-sensor-cells = <1>; - } - -for Hi3660: - tsensor: tsensor@fff30000 { - compatible = "hisilicon,hi3660-tsensor"; - reg = <0x0 0xfff30000 0x0 0x1000>; - interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; - #thermal-sensor-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml b/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml index d2c1e4573c32..e7ddaa6c966e 100644 --- a/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml @@ -16,6 +16,8 @@ description: | for i.MX8MM which has ONLY 1 sensor, v2 is for i.MX8MP which has 2 sensors. +$ref: thermal-sensor.yaml# + properties: compatible: oneOf: @@ -51,9 +53,8 @@ required: - compatible - reg - clocks - - '#thermal-sensor-cells' -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml b/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml index ca81c8afba79..79e691b08341 100644 --- a/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml @@ -38,7 +38,6 @@ required: - compatible - reg - interrupts - - '#thermal-sensor-cells' if: properties: diff --git a/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml index 331cf4e662e3..0259cd3ce9c5 100644 --- a/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml @@ -99,7 +99,6 @@ required: - resets - nvmem-cells - nvmem-cell-names - - "#thermal-sensor-cells" additionalProperties: false diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml index b0237d236021..19bb1f324183 100644 --- a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml +++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml @@ -197,7 +197,6 @@ required: - clock-names - resets - reset-names - - "#thermal-sensor-cells" allOf: - $ref: thermal-sensor.yaml diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.yaml b/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.yaml index c91fd07e4061..978b9e6ab8a3 100644 --- a/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.yaml @@ -20,11 +20,7 @@ description: | node. See ../firmware/nvidia,tegra186-bpmp.yaml for details of the BPMP binding. - This node represents a thermal sensor. See - - Documentation/devicetree/bindings/thermal/thermal-sensor.yaml - - for details of the core thermal binding. +$ref: thermal-sensor.yaml# properties: compatible: @@ -33,10 +29,6 @@ properties: - nvidia,tegra194-bpmp-thermal '#thermal-sensor-cells': - $ref: /schemas/types.yaml#/definitions/uint32 - description: Number of cells needed in the phandle specifier to - identify a given sensor. Must be 1 and the single cell specifies - the sensor index. const: 1 -additionalProperties: false +unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra30-tsensor.yaml b/Documentation/devicetree/bindings/thermal/nvidia,tegra30-tsensor.yaml index a35da257b070..63a29a1f7fe6 100644 --- a/Documentation/devicetree/bindings/thermal/nvidia,tegra30-tsensor.yaml +++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra30-tsensor.yaml @@ -27,6 +27,8 @@ description: | TSENSOR has two channels which monitor two different spots of the SoC. +$ref: thermal-sensor.yaml# + properties: compatible: const: nvidia,tegra30-tsensor @@ -46,19 +48,14 @@ properties: "#thermal-sensor-cells": const: 1 - assigned-clock-parents: true - assigned-clock-rates: true - assigned-clocks: true - required: - compatible - reg - clocks - resets - interrupts - - "#thermal-sensor-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml b/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml index 5f08b6e59b8a..30b22151aa82 100644 --- a/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml @@ -42,7 +42,6 @@ required: - compatible - reg - interrupts - - '#thermal-sensor-cells' additionalProperties: false diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml index 7541e27704ca..bfad8130a042 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml @@ -8,6 +8,8 @@ title: Qualcomm's SPMI PMIC ADC HC Thermal Monitoring maintainers: - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> +$ref: thermal-sensor.yaml# + properties: compatible: const: qcom,spmi-adc-tm-hc @@ -20,9 +22,6 @@ properties: "#thermal-sensor-cells": const: 1 - description: - Number of cells required to uniquely identify the thermal sensors. Since - we have multiple sensors this is set to 1 "#address-cells": const: 1 @@ -106,9 +105,8 @@ required: - interrupts - "#address-cells" - "#size-cells" - - "#thermal-sensor-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml index d9d2657287cb..4470a5942fb2 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml @@ -8,6 +8,8 @@ title: Qualcomm's SPMI PMIC ADC Thermal Monitoring maintainers: - Dmitry Baryshkov <dmitry.baryshkov@linaro.org> +$ref: thermal-sensor.yaml# + properties: compatible: enum: @@ -23,9 +25,6 @@ properties: "#thermal-sensor-cells": const: 1 - description: - Number of cells required to uniquely identify the thermal sensors. Since - we have multiple sensors this is set to 1 "#address-cells": const: 1 @@ -159,9 +158,8 @@ required: - interrupts - "#address-cells" - "#size-cells" - - "#thermal-sensor-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index 99d9c526c0b6..72048c5a0412 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -67,6 +67,7 @@ properties: - qcom,sm8450-tsens - qcom,sm8550-tsens - qcom,sm8650-tsens + - qcom,x1e80100-tsens - const: qcom,tsens-v2 - description: v2 of TSENS with combined interrupt @@ -217,18 +218,16 @@ properties: "#thermal-sensor-cells": const: 1 - description: - Number of cells required to uniquely identify the thermal sensors. Since - we have multiple sensors this is set to 1 required: - compatible - interrupts - interrupt-names - - "#thermal-sensor-cells" - "#qcom,sensors" allOf: + - $ref: thermal-sensor.yaml# + - if: properties: compatible: @@ -292,27 +291,21 @@ allOf: required: - reg -additionalProperties: false +unevaluatedProperties: false examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> - // Example msm9860 based SoC (ipq8064): - gcc: clock-controller { - - /* ... */ + thermal-sensor { + compatible = "qcom,ipq8064-tsens"; - tsens: thermal-sensor { - compatible = "qcom,ipq8064-tsens"; - - nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>; - nvmem-cell-names = "calib", "calib_backup"; - interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "uplow"; + nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>; + nvmem-cell-names = "calib", "calib_backup"; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; - #qcom,sensors = <11>; - #thermal-sensor-cells = <1>; - }; + #qcom,sensors = <11>; + #thermal-sensor-cells = <1>; }; - | @@ -349,66 +342,66 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> // Example 1 (legacy: for pre v1 IP): tsens1: thermal-sensor@4a9000 { - compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1"; - reg = <0x4a9000 0x1000>, /* TM */ - <0x4a8000 0x1000>; /* SROT */ + compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1"; + reg = <0x4a9000 0x1000>, /* TM */ + <0x4a8000 0x1000>; /* SROT */ - nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; - nvmem-cell-names = "calib", "calib_sel"; + nvmem-cells = <&tsens_caldata>, <&tsens_calsel>; + nvmem-cell-names = "calib", "calib_sel"; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "uplow"; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; - #qcom,sensors = <5>; - #thermal-sensor-cells = <1>; + #qcom,sensors = <5>; + #thermal-sensor-cells = <1>; }; - | #include <dt-bindings/interrupt-controller/arm-gic.h> // Example 2 (for any platform containing v1 of the TSENS IP): tsens2: thermal-sensor@4a9000 { - compatible = "qcom,qcs404-tsens", "qcom,tsens-v1"; - reg = <0x004a9000 0x1000>, /* TM */ - <0x004a8000 0x1000>; /* SROT */ + compatible = "qcom,qcs404-tsens", "qcom,tsens-v1"; + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ - nvmem-cells = <&tsens_caldata>; - nvmem-cell-names = "calib"; + nvmem-cells = <&tsens_caldata>; + nvmem-cell-names = "calib"; - interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "uplow"; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; - #qcom,sensors = <10>; - #thermal-sensor-cells = <1>; + #qcom,sensors = <10>; + #thermal-sensor-cells = <1>; }; - | #include <dt-bindings/interrupt-controller/arm-gic.h> // Example 3 (for any platform containing v2 of the TSENS IP): tsens3: thermal-sensor@c263000 { - compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; - reg = <0xc263000 0x1ff>, - <0xc222000 0x1ff>; + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; + reg = <0xc263000 0x1ff>, + <0xc222000 0x1ff>; - interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "uplow", "critical"; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; - #qcom,sensors = <13>; - #thermal-sensor-cells = <1>; + #qcom,sensors = <13>; + #thermal-sensor-cells = <1>; }; - | #include <dt-bindings/interrupt-controller/arm-gic.h> // Example 4 (for any IPQ8074 based SoC-s): tsens4: thermal-sensor@4a9000 { - compatible = "qcom,ipq8074-tsens"; - reg = <0x4a9000 0x1000>, - <0x4a8000 0x1000>; + compatible = "qcom,ipq8074-tsens"; + reg = <0x4a9000 0x1000>, + <0x4a8000 0x1000>; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "combined"; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "combined"; - #qcom,sensors = <16>; - #thermal-sensor-cells = <1>; + #qcom,sensors = <16>; + #thermal-sensor-cells = <1>; }; ... diff --git a/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml b/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml index d155d6799da6..1876fe9555d6 100644 --- a/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml @@ -9,6 +9,8 @@ title: Thermal Monitoring Unit (TMU) on Freescale QorIQ SoCs maintainers: - Anson Huang <Anson.Huang@nxp.com> +$ref: thermal-sensor.yaml# + properties: compatible: description: | @@ -68,9 +70,8 @@ required: - interrupts - fsl,tmu-range - fsl,tmu-calibration - - '#thermal-sensor-cells' -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml index 6a81cb6e11bc..b6657d64cf3d 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml @@ -15,6 +15,8 @@ description: maintainers: - Niklas Söderlund <niklas.soderlund@ragnatech.se> +$ref: thermal-sensor.yaml# + properties: compatible: enum: @@ -57,7 +59,6 @@ required: - clocks - power-domains - resets - - "#thermal-sensor-cells" if: properties: @@ -96,7 +97,7 @@ else: required: - interrupts -additionalProperties: false +unevaluatedProperties: false examples: - | @@ -105,33 +106,33 @@ examples: #include <dt-bindings/power/r8a7795-sysc.h> tsc: thermal@e6198000 { - compatible = "renesas,r8a7795-thermal"; - reg = <0xe6198000 0x100>, - <0xe61a0000 0x100>, - <0xe61a8000 0x100>; - interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 522>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 522>; - #thermal-sensor-cells = <1>; + compatible = "renesas,r8a7795-thermal"; + reg = <0xe6198000 0x100>, + <0xe61a0000 0x100>, + <0xe61a8000 0x100>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <1>; }; thermal-zones { - sensor_thermal: sensor-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&tsc 0>; - - trips { - sensor1_crit: sensor1-crit { - temperature = <90000>; - hysteresis = <2000>; - type = "critical"; - }; - }; + sensor_thermal: sensor-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 0>; + + trips { + sensor1_crit: sensor1-crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; }; + }; }; - | #include <dt-bindings/clock/r8a779a0-cpg-mssr.h> @@ -139,14 +140,14 @@ examples: #include <dt-bindings/power/r8a779a0-sysc.h> tsc_r8a779a0: thermal@e6190000 { - compatible = "renesas,r8a779a0-thermal"; - reg = <0xe6190000 0x200>, - <0xe6198000 0x200>, - <0xe61a0000 0x200>, - <0xe61a8000 0x200>, - <0xe61b0000 0x200>; - clocks = <&cpg CPG_MOD 919>; - power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; - resets = <&cpg 919>; - #thermal-sensor-cells = <1>; + compatible = "renesas,r8a779a0-thermal"; + reg = <0xe6190000 0x200>, + <0xe6198000 0x200>, + <0xe61a0000 0x200>, + <0xe61a8000 0x200>, + <0xe61b0000 0x200>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 919>; + #thermal-sensor-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml index 119998d10ff4..221a58d18cad 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml @@ -98,8 +98,8 @@ examples: # Example (non interrupt support) - | thermal@ffc48000 { - compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal"; - reg = <0xffc48000 0x38>; + compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal"; + reg = <0xffc48000 0x38>; }; # Example (interrupt support) @@ -109,12 +109,12 @@ examples: #include <dt-bindings/interrupt-controller/irq.h> thermal@e61f0000 { - compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal"; - reg = <0xe61f0000 0x14>, <0xe61f0100 0x38>, - <0xe61f0200 0x38>, <0xe61f0300 0x38>; - interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>; - power-domains = <&pd_c5>; + compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal"; + reg = <0xe61f0000 0x14>, <0xe61f0100 0x38>, + <0xe61f0200 0x38>, <0xe61f0300 0x38>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>; + power-domains = <&pd_c5>; }; # Example (with thermal-zone) @@ -124,32 +124,32 @@ examples: #include <dt-bindings/power/r8a7790-sysc.h> thermal: thermal@e61f0000 { - compatible = "renesas,thermal-r8a7790", - "renesas,rcar-gen2-thermal", - "renesas,rcar-thermal"; - reg = <0xe61f0000 0x10>, <0xe61f0100 0x38>; - interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 522>; - power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; - resets = <&cpg 522>; - #thermal-sensor-cells = <0>; + compatible = "renesas,thermal-r8a7790", + "renesas,rcar-gen2-thermal", + "renesas,rcar-thermal"; + reg = <0xe61f0000 0x10>, <0xe61f0100 0x38>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <0>; }; thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <5000>; - - thermal-sensors = <&thermal>; - - trips { - cpu-crit { - temperature = <115000>; - hysteresis = <0>; - type = "critical"; - }; - }; - cooling-maps { - }; + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; }; + cooling-maps { + }; + }; }; diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml b/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml index 55f8ec0bec01..b717ea8261ca 100644 --- a/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml @@ -9,6 +9,8 @@ title: Temperature Sensor ADC (TSADC) on Rockchip SoCs maintainers: - Heiko Stuebner <heiko@sntech.de> +$ref: thermal-sensor.yaml# + properties: compatible: enum: @@ -76,9 +78,8 @@ required: - clocks - clock-names - resets - - "#thermal-sensor-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml b/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml index 03f4b926e53c..136589f5adee 100644 --- a/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml @@ -13,6 +13,8 @@ description: maintainers: - Biju Das <biju.das.jz@bp.renesas.com> +$ref: thermal-sensor.yaml# + properties: compatible: items: @@ -43,36 +45,35 @@ required: - clocks - power-domains - resets - - "#thermal-sensor-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | #include <dt-bindings/clock/r9a07g044-cpg.h> tsu: thermal@10059400 { - compatible = "renesas,r9a07g044-tsu", - "renesas,rzg2l-tsu"; - reg = <0x10059400 0x400>; - clocks = <&cpg CPG_MOD R9A07G044_TSU_PCLK>; - resets = <&cpg R9A07G044_TSU_PRESETN>; - power-domains = <&cpg>; - #thermal-sensor-cells = <1>; + compatible = "renesas,r9a07g044-tsu", + "renesas,rzg2l-tsu"; + reg = <0x10059400 0x400>; + clocks = <&cpg CPG_MOD R9A07G044_TSU_PCLK>; + resets = <&cpg R9A07G044_TSU_PRESETN>; + power-domains = <&cpg>; + #thermal-sensor-cells = <1>; }; thermal-zones { - cpu-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&tsu 0>; - - trips { - sensor_crit: sensor-crit { - temperature = <125000>; - hysteresis = <1000>; - type = "critical"; - }; - }; + cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsu 0>; + + trips { + sensor_crit: sensor-crit { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; }; + }; }; diff --git a/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml b/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml index 1344df708e2d..29a08b0729ee 100644 --- a/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml @@ -61,7 +61,8 @@ properties: TRIMINFO at 0x10068000 contains data for TMU channel 2 minItems: 1 - '#thermal-sensor-cells': true + '#thermal-sensor-cells': + const: 0 vtmu-supply: description: The regulator node supplying voltage to TMU. diff --git a/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml b/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml index 6f975821fa5e..8210b7079721 100644 --- a/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml @@ -14,6 +14,8 @@ description: | maintainers: - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> +$ref: thermal-sensor.yaml# + properties: compatible: enum: @@ -38,9 +40,8 @@ properties: required: - compatible - interrupts - - "#thermal-sensor-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml b/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml index 76aaa004c8ac..afa551f6185f 100644 --- a/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml @@ -11,6 +11,8 @@ maintainers: - Baolin Wang <baolin.wang7@gmail.com> - Chunyan Zhang <zhang.lyra@gmail.com> +$ref: thermal-sensor.yaml# + properties: compatible: const: sprd,ums512-thermal @@ -77,35 +79,34 @@ required: - clock-names - nvmem-cells - nvmem-cell-names - - "#thermal-sensor-cells" - "#address-cells" - "#size-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | - ap_thm0: thermal@32200000 { - compatible = "sprd,ums512-thermal"; - reg = <0x32200000 0x10000>; - clock-names = "enable"; - clocks = <&aonapb_gate 32>; - #thermal-sensor-cells = <1>; - nvmem-cells = <&thm0_sign>, <&thm0_ratio>; - nvmem-cell-names = "thm_sign_cal", "thm_ratio_cal"; - #address-cells = <1>; - #size-cells = <0>; - - prometheus-sensor@0 { - reg = <0>; - nvmem-cells = <&thm0_sen0>; - nvmem-cell-names = "sen_delta_cal"; - }; - - ank-sensor@1 { - reg = <1>; - nvmem-cells = <&thm0_sen1>; - nvmem-cell-names = "sen_delta_cal"; - }; + thermal@32200000 { + compatible = "sprd,ums512-thermal"; + reg = <0x32200000 0x10000>; + clock-names = "enable"; + clocks = <&aonapb_gate 32>; + #thermal-sensor-cells = <1>; + nvmem-cells = <&thm0_sign>, <&thm0_ratio>; + nvmem-cell-names = "thm_sign_cal", "thm_ratio_cal"; + #address-cells = <1>; + #size-cells = <0>; + + prometheus-sensor@0 { + reg = <0>; + nvmem-cells = <&thm0_sen0>; + nvmem-cell-names = "sen_delta_cal"; + }; + + ank-sensor@1 { + reg = <1>; + nvmem-cells = <&thm0_sen1>; + nvmem-cell-names = "sen_delta_cal"; }; + }; ... diff --git a/Documentation/devicetree/bindings/thermal/st,stm32-thermal.yaml b/Documentation/devicetree/bindings/thermal/st,stm32-thermal.yaml index ab043084f667..1c01a80a0cdd 100644 --- a/Documentation/devicetree/bindings/thermal/st,stm32-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/st,stm32-thermal.yaml @@ -9,6 +9,8 @@ title: STMicroelectronics STM32 digital thermal sensor (DTS) maintainers: - Pascal Paillet <p.paillet@foss.st.com> +$ref: thermal-sensor.yaml# + properties: compatible: const: st,stm32-thermal @@ -30,14 +32,13 @@ properties: const: 0 required: - - "#thermal-sensor-cells" - compatible - reg - interrupts - clocks - clock-names -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml index 68398e7e8655..0f435be1dbd8 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml @@ -49,7 +49,10 @@ properties: to take when the temperature crosses those thresholds. patternProperties: - "^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$": + # Node name is limited in size due to Linux kernel requirements - 19 + # characters in total (see THERMAL_NAME_LENGTH, including terminating NUL + # byte): + "^[a-zA-Z][a-zA-Z0-9\\-]{1,10}-thermal$": type: object description: Each thermal zone node contains information about how frequently it @@ -229,7 +232,6 @@ patternProperties: required: - thermal-sensors - - trips additionalProperties: false diff --git a/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml index 7ed0abe9290f..c123d9070525 100644 --- a/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml @@ -9,6 +9,8 @@ title: Texas Instruments AM654 VTM (DTS) maintainers: - Keerthy <j-keerthy@ti.com> +$ref: thermal-sensor.yaml# + properties: compatible: const: ti,am654-vtm @@ -26,9 +28,8 @@ required: - compatible - reg - power-domains - - "#thermal-sensor-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | @@ -46,11 +47,11 @@ examples: thermal-sensors = <&vtm0 0>; trips { - mpu0_crit: mpu0_crit { - temperature = <125000>; /* milliCelsius */ - hysteresis = <2000>; /* milliCelsius */ - type = "critical"; - }; + mpu0_crit: mpu0_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; }; }; ... diff --git a/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml b/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml index 171b3622ed84..82b77b9795a3 100644 --- a/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml @@ -22,6 +22,8 @@ description: | Temp(C) = (-9.2627e-12) * x^4 + (6.0373e-08) * x^3 + \ (-1.7058e-04) * x^2 + (3.2512e-01) * x + (-4.9003e+01) +$ref: thermal-sensor.yaml# + properties: compatible: enum: @@ -64,9 +66,8 @@ required: - compatible - reg - power-domains - - "#thermal-sensor-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | |