diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net/pcs')
| -rw-r--r-- | Documentation/devicetree/bindings/net/pcs/snps,dw-xpcs.yaml | 136 |
1 files changed, 136 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/pcs/snps,dw-xpcs.yaml b/Documentation/devicetree/bindings/net/pcs/snps,dw-xpcs.yaml new file mode 100644 index 000000000000..e77eec9ac9ee --- /dev/null +++ b/Documentation/devicetree/bindings/net/pcs/snps,dw-xpcs.yaml @@ -0,0 +1,136 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/pcs/snps,dw-xpcs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys DesignWare Ethernet PCS + +maintainers: + - Serge Semin <fancer.lancer@gmail.com> + +description: + Synopsys DesignWare Ethernet Physical Coding Sublayer provides an interface + between Media Access Control and Physical Medium Attachment Sublayer through + the Media Independent Interface (XGMII, USXGMII, XLGMII, GMII, etc) + controlled by means of the IEEE std. Clause 45 registers set. The PCS can be + optionally synthesized with a vendor-specific interface connected to + Synopsys PMA (also called DesignWare Consumer/Enterprise PHY) although in + general it can be used to communicate with any compatible PHY. + + The PCS CSRs can be accessible either over the Ethernet MDIO bus or directly + by means of the APB3/MCI interfaces. In the later case the XPCS can be mapped + right to the system IO memory space. + +properties: + compatible: + oneOf: + - description: Synopsys DesignWare XPCS with none or unknown PMA + const: snps,dw-xpcs + - description: Synopsys DesignWare XPCS with Consumer Gen1 3G PMA + const: snps,dw-xpcs-gen1-3g + - description: Synopsys DesignWare XPCS with Consumer Gen2 3G PMA + const: snps,dw-xpcs-gen2-3g + - description: Synopsys DesignWare XPCS with Consumer Gen2 6G PMA + const: snps,dw-xpcs-gen2-6g + - description: Synopsys DesignWare XPCS with Consumer Gen4 3G PMA + const: snps,dw-xpcs-gen4-3g + - description: Synopsys DesignWare XPCS with Consumer Gen4 6G PMA + const: snps,dw-xpcs-gen4-6g + - description: Synopsys DesignWare XPCS with Consumer Gen5 10G PMA + const: snps,dw-xpcs-gen5-10g + - description: Synopsys DesignWare XPCS with Consumer Gen5 12G PMA + const: snps,dw-xpcs-gen5-12g + + reg: + items: + - description: + In case of the MDIO management interface this just a 5-bits ID + of the MDIO bus device. If DW XPCS CSRs space is accessed over the + MCI or APB3 management interfaces, then the space mapping can be + either 'direct' or 'indirect'. In the former case all Clause 45 + registers are contiguously mapped within the address space + MMD '[20:16]', Reg '[15:0]'. In the later case the space is divided + to the multiple 256 register sets. There is a special viewport CSR + which is responsible for the set selection. The upper part of + the CSR address MMD+REG[20:8] is supposed to be written in there + so the corresponding subset would be mapped to the lowest 255 CSRs. + + reg-names: + items: + - enum: [ direct, indirect ] + + reg-io-width: + description: + The way the CSRs are mapped to the memory is platform depended. Since + each Clause 45 CSR is of 16-bits wide the access instructions must be + two bytes aligned at least. + default: 2 + enum: [ 2, 4 ] + + interrupts: + description: + System interface interrupt output (sbd_intr_o) indicating Clause 73/37 + auto-negotiation events':' Page received, AN is completed or incompatible + link partner. + maxItems: 1 + + clocks: + description: + The MCI and APB3 interfaces are supposed to be equipped with a clock + source connected to the clk_csr_i line. + + PCS/PMA layer can be clocked by an internal reference clock source + (phyN_core_refclk) or by an externally connected (phyN_pad_refclk) clock + generator. Both clocks can be supplied at a time. + minItems: 1 + maxItems: 3 + + clock-names: + oneOf: + - minItems: 1 + items: # MDIO + - enum: [core, pad] + - const: pad + - minItems: 1 + items: # MCI or APB + - const: csr + - enum: [core, pad] + - const: pad + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + ethernet-pcs@1f05d000 { + compatible = "snps,dw-xpcs"; + reg = <0x1f05d000 0x1000>; + reg-names = "indirect"; + + reg-io-width = <4>; + + interrupts = <79 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&ccu_pclk>, <&ccu_core>, <&ccu_pad>; + clock-names = "csr", "core", "pad"; + }; + - | + mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-pcs@0 { + compatible = "snps,dw-xpcs"; + reg = <0>; + + clocks = <&ccu_core>, <&ccu_pad>; + clock-names = "core", "pad"; + }; + }; +... |